Quick Start Guide1D Barcode Scanner

Contents: Barcode Scanner, Quick Start Guide, USB/RS 232 CablePower Adapter (optional)

Lights Indicator

Beeps

Beep indication ExplanationOne beep Decoding SuccessfullyThree beeps USB Data transfer failedFour beeps Power ONContinuous beep Successful parameter setting

LED indication ExplanationBlue light blinking Decoding SuccessfullyRed light ON Standby status

NOTE: Product appearance may vary

Scanner Overview Plug & Unplug Cable

Connection Guide

Plug in as shown above Press the tab until it clicks, thenpull out the cable

Scanning Angle Correct Scan Method

NOTE: Laser beam or Red LED light should fullycover the bar code

Q1: USB bar code scanner gives a continous beeping soundafter scanner with no data uploaded.

A1: Unplug the plug to the scanner from USB port and plug it into a different USB port or reset the interface mode to “USB HUD Keyboard.”

Q2: USB bar code scanner makes alarm buzzer sound and nodata is uploaded.

A2: Restore factory default

Q3: No laser beam or LED light after connection via RS232

A3: Refer to Data Cable Connection guide in this manual andcheck power supply.

Q4: No data uploaded and alarm buzzer after scanning viaRS232.

A4: Terminal should have software to transfer data whenusing RS232.

Troubleshooting Q & A

Automatically

Decode Settings - Set Up Function Bar CodesDefault Parameters

Numeric Keypad

Interface Mode Code39 Settings

UPC SettingsKeyboard LanguageTrigger Mode

Decode Mode

Suffix Values

Auto Trigger (optional)

Choose a keyboard layout according to your systemlanguage settings.

e