19”lcd hdtv/dvd combo - roadtrucker inc. · pdf file19”lcd hdtv/dvd combo. 1 ......
TRANSCRIPT
SLC-1969A-3
USER’S MANUAL
USER’S MANUAL
19”LCD HDTV/DVD COMBO
1
IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.
This symbol indicates important instructions accompanying the product.
WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.The apparatus must not be exposed to dripping or splashing. Objects filled with liquids, such as vases or drinking glasses, must never be placed on the apparatus.
This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
Important Safety Precautions
2
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna- discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrode. See following example.
16. Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
ELECTRICSERVICEEQUIPMENT
NEC-NATIONAL ELECTRICALCODE
POWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250 PART H)
GROUND CLAMPS
GROUNDING CONDUCTORS(NEC SECTION 810-21)
ANTENNADISCHARGE UNINT(NEC SECTION 810-21)
ANTENNALEAD IN WIRE
Important Safety Precautions
3
Table of Contents
4
Table of Contents
Time Setup
Troubleshooting
2626
32
30
Introduction Features Specifications
5
6
Accessories
General Description Overview of front and side panel Overview of back panel Overview of remote control
Installing Batteries in the Remote Control
77
8
9
1013
External Connection Antenna connection Connecting VCR
Connecting DVD Player/Set-Top Box
Connecting DVD Player/Set-Top Box via HDMI Connnecting Digital Audio System Connecting Amplifier/DVD Home Theater Connecting PC
14
15
16
17
17
18
1313
Menu system introduction
Picture
Sound
Channel
22
22
23
24
Input Setup
Supporting signals Basic operation Turning the TV On and Off
Channels Selection
Volume Adjustment and Mute Setup
EPG Menu
18
19
19
20
20
20
21
DVD Part-BASIC OPERATION
Lock 28
5
Input terminals used for external equipment connection
One ANTENNA jack
One computer VGA/PC input One outputCOAXIALOne COMPONENT inputs One HDMI inputs One AV inputs One AUDIO output
l TV adopts 19" TFT LCD display screenl HDTV Compatible(480i, 480p,720p, 1080i, 1080p)l Support American TV Standard 8VSB/Free 64/256QAM,NTSC System, ATSC Systeml Connect to computer directly to realize TV/monitor combo.l Zero X radiation complies to green environment protection requirementl Advanced Chroma Processingl Closed captioning/PARENTAL LOCKl SAP/STEREO/MONO; BTSC.l HDMI inputsl Support COAXIAL ouput
W arningsFeatures
Introduction
6
Fine digital control
NTSC3.58
75W (Unbalance)
2X2.5W
48W
1400X900
19 inches diagonal (max.)
Color active matrix LCD display
462 X 170 mm X 383mmmm
5.2Kg
NTSC System, ATSC System
Antenna: 2~69; Cable: 1~135 (Analog: 1-125, Digital: 1-135)
Note:
Introduction
W arningsSpecifications
DC 3V (Two AAA size batteries)
o
0C-40Co
Design and specification modification maybe made at any time without prior notice; all data and dimensions are approximations.
DC:12V 5A
IN Put
Out PutAdapter requirement
7
Remote Control &
Batteries (AAAx 2)
Please make sure the following items are included with your LCD TV. If any items are
missing, contact your dealer.
Owner’s
Instructions
Accessories
8
SPEAKERREMOTE CONTROL SENSORAim the remote control towards this spot on the TV.POWER INDICATORGreen: In power on mode.Red: In standby mode.INPUTToggles between all the available input sources ( TV,AV,DVD,COMPONENT,HDMI,VGA)
MENU Press to see an on-screen menu of your TV's features.
CH+/- Press to change channels.
In the on-screen menu, use the CH +/- buttons as up/down arrow buttons.
VOL+/- Press to increase or decrease the volume.
In the on-screen menu, use the VOL +/- buttons as left/right arrow buttons. Standby button Press button to toggle between normal and standby mode.
General Description
Overview of front and side panel
Press button on the side
pr-essing button , press “ ” button twice to complet-ely stop disc,the osd shoe“stop”
and then press the“ ”button to resume playing from the beginni-ng of the disc
General Description
Overview of side the DVD panel
panel or on the remote controller
After placed a disc in the disc tray, press button to play the disc,and press button twice to pause
Press“ ” button to stop in two modes: press the button once,STOP memorize the interrupt position and the OSD
shows“pre-stop” resume play by
Press brtton to skip DVD chapter or VCD program
or CD track
backward
Prees button to skip advance DVD chapter or VCD program or CD track Note:plyer will not skip forward or backward during “WARNING” section of a DVD disc, single chapter DVD or single track CD cannot skip
Press button fast forward through the disc, repe-atedly pressing the button, the player will fast forw-ard playing as following
INPUT
⑤ ④ ⑥ ⑦ ⑧
③② ①
①
9
HDMI Connect to the HDMI jack of a devicewith an HDMI output. VGA/PC INConnect to the video output jack on your PC.
PHONE OUTConnect a set of phone for private
COMPONENT Connect Component video.
COMPOSITE VIDEOVideo input for external devices, such as a camcorder or VCR.
General Description
Overview of back panel
COMPOSITE COMPONENT AUDIOAudio inputs for external devices.
AUDIO OUTConnect to the audio output jacks on your amplifier/home theater.
COAXIAL Connect to a Digital Audio devices.
ANTConnect to an antenna or cable TV system.
10
Overview of remote control
General Description
11.-/-- Button
In TV mode, press this button and input the channel
number which you want to select.
12.AV/TV/DVD Button
Press this button to display the input source such as
"TV”, "AV”, " ”, "Component" ,"HDMI" and "VGA"DVD
13 CH. LIST ButtonPress this button to display the channel list in TV mode.
14.VOLUME+/VOLUME- (V+/V-) ButtonsPress these buttons to increase or decrease the volume.
TV MODE:1.POWER Button( )Press this button to turn the TV on or into standby mode.
2.MUTE ButtonPress this button to mute the sound and the sign of mute will appear all the while if you do not press again. But the sign of mute will disappear if the CCD is displayed.
3.SLEEP ButtonPress this button to set the sleep timer. When the preset length of time has passed, the TV set enters standby
60、90、 120、180、240 minutes.
4.SOUND ButtonPress this button to select desired sound mode. Four sound modes are available including Standard, Music, Movie and Personal.
5.PICTURE ButtonPress this button to select desired picture mode. Four picture modes are available including Standard, Soft, Dynamic and Personal.
6.RECALL ButtonThis button is used to return to the previous channel 7.MTS ButtonWhen stereo program is received, press this button to switch sound system between mono and stereo. When SAP program is received, press this button to switch sound system between mono and SAP. When stereo and SAP program is received, press this button to switch among mono, stereo and SAP.8.CC Button
9. ButtonDISPLAYPress this button to display the information on current
input.
10.NUMBER (0-9)Buttons
Press these buttons to enter digits. These buttons for
direct access to use a channel to enter channel number
for both ATV and DTV or enter password for Parental lock.
1
3
6
10
11
5
9
4
8
2
7
12
16
18
2322
13
14 15
17
19
20
21
5、10、45、30、
PHONE
10
10
listening
DC12V IN
Connect the supplied powerUP/DOWN button select item and press Using
ENTER button to enter selected item.or RIGHT
This button doesn’t Look in this model
SOUND PICTURE
RECALL DISPLAY
EJECT PAUSE/PLAY
OSD STOP
STEUP
SF DVD MENU
B.MARK RANDOM REPA-B REPEAT
S.TITLE GO TO ANGLE CLEAR
PBC AUDIO PROGRAM D.ZOOM
ENTER
CH +
CH -
V+
V+
POWER
CH.LIST FAV.LIST
EPGMENU
ZOOMEXIT
/ -- -
MTS CC
OSD BUTTONPress this button once to show main playback in
formation on TV screen and press it again to show
playback time. Press this button at the fifth time, and
then the display will be cancelled.
DVD MENU BUTTON
If playing some DVD discs, press this button back to
root menu screen .
If playing DVDs you can use the functions of MENU,
PROGRAM and RANDOM.
ENTER BUTTON:
Press this button to confirm your selecting.
FR/FF BUTTON( / )
Press these buttons to go to t
chapter ( DVD ) When playing CD disc , press“ ”
button twice to select previous song.
PREV/NEXT BUTTON( / )
These buttons allow skipping ahead/back at 5-level
speeds. Press PLAY button to return to normal playback.
Press this button to start playback. Press this button
again to pause playback.
When this button is pressed once, the unit records the
stopped point, from where playback will resume
(resume function) if PLAY is pressed afterwards.
STOP BUTTON( )
PLAY AND PAUSE BUTTON( )
SF BUTTON:Press this button , you can play the disc slow Forward.
But if STOP button is pressed again instead of PLAY
button, there will be no resume function.
PROGRAM(PROG) BUTTON:
When you want to play only partial tracks/chapters of a disc(DVDs) or to arrange the tracks/chapters playback order, you need to program the following:Press PROGRAM button. Then "PROGRAM" will appear on TV screen.Press the track number in the order you want. For example, if the track numbers you want to play are 1, 3 and 8, just input in the order of 1-3-8.You can press CLEAR button to cancel and input again if you miss input track numbers.Now you can press " " and "OK" button to select"START"option and enjoy the desired
[DVD only]
TITLE XX/XX CHAPTER [ ]/XXX
[DVD only]
TRACK GOTO T: XX
[CD]
GO TO BUTTONPress this button to go to desired position. The player
provides 3 search mode.
When the above items are showed on LCD screen, you
can input numbers to locate desired sector, then press
PLAY to commence play.
The number you input is invalid if it is beyond the track's
capacity.
DISC GOTO
[DVD only]
CHAPTER XX/XX TIME
[CD]
CLEAR BUTTON
Press this button, you can cancel the numbers you input,
just like a eraser.
SETUP BUTTON
Press this button to get the setup menu. you can select
the setting as you like.
ANGLE BUTTONSome DVD contains several scenes taken at the same time in different angles. Press this key to select a different angle (if the disc supports this function.)
D.ZOOM BUTTONPress this button during normal, zoom in or zoomout playback mode. This player can magnify apicture at 3 levels. Press this button to magnifypicture and use direction buttons to selectdesired part of the zoomed picture.
“ ”
15.CHANNEL+/CHANNEL- (CH+/CH-) buttonsPress these buttons to select channels in ascending or descending order.
16.FAVORITE LIST (FAV. LIST) ButtonPress this button to display the favorite program list 17.MENU ButtonPress this button to enter the menu mode for various optional adjustable settings or quit from current menu.
18.ELECTRONIC PROGRAM GUIDE (EPG) ButtonPress this button to call up the Electronic Program Guide.
19.UP/DOWN ( ▲ / ) ButtonsPress these buttons to select the desired items in the menu.20.LIFT/RIGHT ( / ) ButtonsPress these buttons to select the desired items in the menu, or enter the selected.21.ENTER ButtonPress this button to enter the selected item.22.EXIT ButtonPress this button to escape from the current operation.23.ZOOM ButtonPress this button to select the screen size, such as Wide, Zoom, Cinema and Normal.
▲▲
Press OPEN/CLOSE button to load disc on disc tray.
In case of interactive DVDs with playback control, a menu
appears on the TV screen.
Hold the disc without touching either of its surfaces,
position it with the printed title side facing up, align it
with the guides, and place it in its proper position.
EJECT BUTTON( )
S.TITLE BUTTON
To press this button, you can change the subtitle
language from the one selected at the initial settings
to a different language, if available.
When play VCD, press this button consecutively and the
audio output will change as following:
MIX MONO STEREO
DVD Mode:
PBC BUTTONPress this button can return to the menu of the disc,then play the disc from the first track.
AUDIO BUTTONWhen play DVD, to press this button, you can change the
audio language from the one selected at the initial
settings to a different language, if available.
B.MARK BUTTON:
When playing DVD disc, press this key to mark the
place where you want to replay again.
BOOK MARK
Press Enter key to mark /play;Press clear key to clean.You can use“ ” keys to select different contentto mark /play.
NUMERIC BUTTONS(0-9):
You can select desired titles(DVD) by pressing these
buttons directly only if the title or track number is less
than 10.
If the title or track number is over 10. For instance,
if "28" is wanted, press "10+" twice, and then press
the 2-digit number "8".
tracks.
LEFT MONO RIGHT MONO
General Description
Overview of remote control
General Description
Overview of remote control
RANDOM BUTTON(DVD only)
Random mode allows you to play tracks randomly by pressing this button, pressing again will cancel random playback.
A-B REPEAT BUTTON( A-B )
REP
You can repeatedly play a given portion by operating as
following:
To press this button once to define the portion head.
To press this button again to define the portion toe.
Then the portion will be played repeatedly.To press this
button again to return to normal playback.
REPEAT BUTTON(REP)
To press this button you can repeatedly play a chapter
(DVD) when " chapter " appears on TV screen ,You
can repeatedly play a title(DVD) when " title " appears
on TV screen ,You can also repeatedly play the whole
disc(DVD) when " All" appears on TV screen, and You
can cancel repeat function when no " " on TV screen.
1112
Remark: If a universal remote to be used to control this TV, please program the universal remote with Philips code.,
13
Installing Batteries in the Remote Control
Installing BatteriesInstalling Batteries
1Open the battery compartment cover on the back side.
2Insert two 1.5V AAA size batteries incorrect polarity. Don´t mix old or usedbatteries with new ones.
3 Closed the cover.
Point the remote towards the remote control sensor of the wireless TV and use it within 7 meters.
Put the used batteries into the recyc-ling bin since it can negatively affectthe environment.
Universal Remote Control operation please refer to Appendix 2.
General Description
Battery
Cover
2xsize AAA 1.5V
BatteryCover
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details Please refer to the following drawing.
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
75ohm coaxial cableAntenna cable
Antennas with 300 W flat twins Leads Antennas with 75 W Round Leads
External Connection
External Connection
Connecting VCR
14
These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system.
5
VCR Rear Panel
4
3
Audio Cable (Not supplied)
Video Cable (Not supplied)
RF Cable (Not supplied)
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. We recommend the use of cables with a Ferrite Core.
1. Unplug the cable or antenna from the back of the TV.2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the VIDEO IN jack on the TV.5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and AUDIO R jacks on the TV. If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
TV Rear Panel
PHONE
The batteries shall not be eposed to ecessive heat such as sunshine fire of the like
SLEEP
P.MODE S.MODE LI ST
1 2 3 SO UR CE+- ./ ABC DEF
DT V
and the AUDIO OUT jacks on the DVD player.
the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player.
External Connection
Connecting DVD Player/Set-Top Box via HDMI
This connection can only be made if there is a HDMI Output connector on the externaldevice.
What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. Multimedia interface is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio. Each DVD player/STB has a different back panel configuration. We recommend the use of cables with a Ferrite Core.
1. Connect an HDMI Cable between the HDMI connector on the TV and the HDMI connector on the DVD player/Set-Top Box.
TV Rear Panel
HDMI Cable (Not supplied)
DVD Player/Set-Top Box
External Connection
Connecting DVD Player/Set-Top Box
The rear panel jacks on your TV make it easy to connect a DVD to your TV.
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also. Each DVD player/STB has a different back panel configuration. When connecting a DVD player/STB, match the color of the connection terminal to the cable. We recommend the use of cables with a Ferrite Core.
1. Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on
2. Connect Audio Cables between the COMPONENT IN [RAUDIO-L] jacks on the TV
TV Rear Panel
Audio Cable (Not supplied)2
Component Cable (Not supplied)1
DVD Player/Set-Top Box
15 16
PHONE
PHONE
External Connection
Connecting Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH. We recommend the use of cables with a Ferrite Core.
1. Connect an COAXIAL Cable between the SPDIF jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the SPDIF terminal: Decrease the gain (volume) of the TV, and adjust the volume level with the system's volume control.
TV Rear Panel
COAXIAL Cable (Not supplied)
Digital Audio System
Connecting Amplifier/DVD Home Theater
Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable. We recommend the use of cables with a Ferrite Core.1. Connect Audio Cables between the AUDIO L and R OUT on the TV and AUDIO IN [R- AUDIO-L]on the Amplifier/DVD Home Theater. When an audio amplifier is connected to the AV OUT [R-AUDIO-L] terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier's volume control.
TV Rear Panel
Audio Cable (Not supplied)
Amplifier/DVD Home Theater
Connecting PC
Each PC has a different back panel configuration. The HDMI jacks do not support PC connection. We recommend the use of cables with a Ferrite Core.
1. Connect a D-Sub Cable between RGB/PC IN connector on the TV and the PC output connector on your computer.
TV Rear Panel
D-Sub Cable (Not supplied)
PC
1
Resolution
ResolutionInput Mode
Input
Input
VGA
Air
Cable Component
8VSB
Free 64/256QAM
60Hz
60Hz60Hz60Hz
480i480p720p
60Hz1080i
HDMI 60Hz60Hz
480p720p
60Hz
1080i
640x480
PC/VGAPC/HDMI SVGA
XGA 60Hz
800X600
1400X900
Vertical Frequency
Vertical Frequency
CVBS NTSC 3.58
Supporting signals
60Hz1080p
60Hz1080p
External Connection
60Hz
17 18
2.Plug PHONE out connector into PHONE out jack on the TV the TV speaker will
be muted.
PHONE
PHONE
PHONE
2 Phone Out
Menu operation
1 Input Setup
Press AV/TV/DVD key on the remote control to enter "INPUT SOURCE" menu. There are five options for you to select:
Use ▲/qkey to move the cursor to the input you desired and press ENTER key to confirm.
Channels SelectionThere are four ways to select channel:1) Using 0~9, and keys on the remote control to select channel directly.ENTER2). Using CHr/s key on the remote control or on your TV to select channel.3) Press PRE.CH key to turn to previous channel, press it again to return to current channel. Note: PRE.CH is not activated if no channel has been changed after TV turning on.4) Select channels from "All Channels List" or "Favorite Channels List".
Volume Adjustment and Mute Setup
Volume adjustmentPress VOLv/w key on the remote control or on the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOLv/w key:
( To increase the volume, press VOL w key;
( To decrease the volume, press VOLv key;
Mute Press MUTE key on the remote control to display mute icon on theleft bottom of the screen, and the volume of TV will be turned off, press MUTE key again to turn on the volume. Mute can be canceled by using one of the methods below:
( Mute will be canceled if you press MUTE button again.
( Mute will be canceled if you press VOL w key.
2
Basic Operation
3
19 20
Turning the TV On and Off
1. Insert the power cord plug into a polarized AC outlet.
2. Press POWER button on the remote control or button on the LCD TV.
3. Normal picture will be displayed on the screen after 6 seconds. If no signal input, "No Signal" will be displayed on the screen.
4. If temporary POWER off is required, press POWER button on the remote control or button on the LCD TV.
5. If you want to completely switch off the power for this unit, unplug the power cord plug for this unit.
6. After switching off the unit, you should turn on the TV again at least 5 seconds later.
Status indication lampGreen: In power on mode.Red: In standby mode.Auto power-off If there is no signal input in any Mode, the TV will automatically accesses the standby state in about 15 minutes. Memory before turning TV offThe settings of picture and the preset channels will be memorized at turning off the unit.When being started up again, the unit will work according to the mode set before being turned off.
1 How to turn the TV on or off
Basic Operation
"TV", "DVD", "AV", "Component","HDMI",and "VGA”.AV
Component
DVD
To use Car cord Use the Car Cord provided for operation on 12V DC.
polarized AC outlet, do not
the blade. It is the user s responsibility to have an electrician replace the obsolete outlet.
3.If you cause a static discharge when touching the unit, and the unit fails to function, simply unplug the unit from the AC outlet, wait a few minutes, and plug it back in. The unit should return to normal
NOTE:1.AC/ DC adaptor provided can be connected to the specified
2.If the polarized AC cord does not fit into a non
NC
voltage (AC 110 volts 60HZ).
attempt to file or cut
operation.
TV
HDMI
VGA
Menu operation
Basic Operation
Current Channel InformationPress INFO key on the remote control to display the following OSD, the indications of items in this OSD are listed in the following table.
EPG Menu
Press EPG key to enter "EPG" menu, the first line displays current channel number channel name, event title and current time.
The second line displays all programs which will be displayed in this channel, press
t/u key to select the program you desired, then press key to enter this program ENTERto watch.
4
5
Picture
Press MENU key to display the main menu on the screen, use t/u key to select "Picture" option, then press or q key to enter "Picture" ENTERsubmenu. 1. Picture mode In "Picture" submenu, use p/q key to move the cursor to "Picture Mode" option to set the mode of video picture. Use t/u key to select one picture mode from four modes: "Standard", "Dynamic”, "Soft" and "Personal".
2. Contrast In "Picture" submenu, use ▲/▼ key to move the cursor to "Contrast" option, then press t/u key to adjust the value.
3. Brightness In "Picture" submenu, use ▲/▼ key to move the cursor to "Brightness" option, then press t/u key to adjust the value.
6. Sharpness In "Picture" submenu, use ▲/▼ key to move the cursor to "Sharpness" option, then press t/u key to adjust the value.
5. Tint In "Picture" submenu, use ▲/▼ key to move the cursor to "Tint" option, then press t/u key to adjust the value.
4. Color In "Picture" submenu, use ▲/▼ key to move the cursor to "Color" option, then press t/u key to adjust the value.
7. Color Mode In "Picture" submenu, use ▲/▼ key to move the cursor to "Color Mode" option, then press t/u key to select one color mode from:"Normal", "Warm", "Cool".
Picture
Menu system instruction
21 22
Sound
Press MENU key to display the main menu on the screen, use t/u key to select "Sound" option, then press ENTER or ▼ key to enter "Sound" submenu.
1. Sound Mode In "Sound" submenu, use ▲/▼ key to move the cursor to the "Sound Mode" option, then use t/u key to select one mode from following four modes: "Standard", "Music", "Movie”
and "Personal".
2. Bass In "Sound" submenu, use ▲/▼ key to move the cursor to the "Bass" option, then use t/u key to adjust the value.
3. Treble In "Sound" submenu, use ▲/▼ key to move the cursor to the "Treble" option, then use t/u key to adjust the value.
4. Balance In "Sound" submenu, use ▲/▼ key to move the cursor to the "Balance" option, then use t/u key to adjust the value.
5. Surround In "Sound" submenu, use ▲/▼ key to move the cursor to the "Surround" option, then use t/u key to select "On" or "Off".
6. AVC In "Sound" submenu, use ▲/▼ key to move the cursor to the "AVC" option, then use t/u key to select "On" or "Off".
7. SPDIF Type Only when the input source is DTV , the function of SPDIF Output is available. In "Sound" submenu, use ▲/▼ key to select "SPDIF" option. There are two modes for you to select:"RAW" and "PCM". Use t/u key to select the mode you desired.
8. Audio Language In "Sound" submenu, use ▲/▼ key to move the cursor to the "Audio Language" option, there are three options for you to select: "French", "Spanish" and "English". Press t/u key to select the language you desired.
Sound
Menu system instruction
Channel
Channel
Press MENU key to display the main menu on
the screen, uset/u key to select "Channel" option, then press or ▼ key to enter ENTER "Channel" submenu.
1. Antenna In "Channel" submenu, use ▲/▼ key to move the cursor to "Antenna" option.
There are two options for you to select:"Cable" and "Air", press t/u key to select the Antenna type you desired.
2. Auto Scan In "Channel" submenu, use ▲/▼ key to
select "Auto Scan", then press or u ENTER key to enter "Auto Scan" submenu.
1) Use ▲/▼ key to select "Cable System", If you have selected "Cable" in "Antenna", there are four options for you to select: "AUTO", "STD", "HRC" and "IRC". Press
t/u key to select the option you desired.
2) Then use ▲/▼ key to select "Auto to Scan", press key or u key to start ENTER searching. If you want to stop searching, just press EXIT key.
3. Favorite In "Channel" submenu, use ▲/▼ key to select "Favorite", then press key to enter ENTER "Favorite" submenu. Use ▲/▼ key to select your favorite channels and use key toENTER ” " and the selected channel will be listed in mark Favorite List.
Menu system instruction
23 24
4. Show/Hide In "Channel" submenu, use ▲/▼ key to select "Show/Hide", then press key to enter ENTER "Show/Hide" submenu. Press ▲/▼ key to select the channel you want to hide or show, then use key to mark or remove " " and the selected channel will be hiden ENTER or shown.
5. Channel No.
In "Channel" submenu, use ▲/▼ key to select "Channel No.", then press t/u key to adjust current channel, you can see the current channel number.
6. Channel Label In "Channel" submenu, use ▲/▼ key to select "Channel Label", then press to enter ENTER "Channel Label" submenu. Use
t/u key to select and use ▲/▼ key to input the character or digit you want, press key MENU to confirm, then current channel is labeled.
Notes: 1. If the channel is audio program, an icon will be displayed in front of "Radio channel". 2. If a program has been added to "Hide" list, when you select program with CH△/ CH▽ key, this program will be directly jumped, but you can select the program by using digital key on the remote control.
Channel
Menu system instruction
Time
Time
Press key to display the main menu on theMENU
screen, use t/u key to select "Time" option, thenpress or ▼ key to enter "Time" submenu. ENTER
1. Sleep Timer In "Time" submenu, use ▲/▼ key to move the cursor to "Sleep Timer" option. There are eleven options for you to select: "Off", "5 Min", "10 Min", "15 Min", "30 Min", "45 Min", "60 Min", "90 Min",
"120 Min", "180 Min" and "240 Min", press t/u key to select "Sleep Time" you desired.
2. Time Zone
In "Time" submenu, use ▲/q key to move the cursor to "Time Zone" option. There are six options for you to select: "Eastern", "Central", "Mountain", "Alaska",
"Pacific", "Hawaii". Press t/u key to select "Time Zone" your desired.
3. Daylight Saving time
In "Time" submenu, use ▲/q key to move the cursor to "Daylight Saving Time" option.
You can press t/u key to select "On" or "Off".
4. Clock Show the update time.
Setup
Press key to display the main menu on theMENU
screen, use t/u key to select "Setup" option, thenpress or ▼ key to enter "Setup" submenu. ENTER1. Menu Language
In "Setup" submenu, use ▲/q key to move the cursor to select "Menu Language" option, there are "English", and options "Français" “Español"
you can select. Press t/u key to select the option you desired.
Setup
Menu system instruction
25 26
2. Transparency
desired.
In "Setup" submenu, use ▲/q key to move the cursor to select "Transparency" option,
there are "On" or "Off" options you can select. Press t/u key to select the option you
Setup3. Zoom Mode
In "Setup" submenu, use ▲/q key to move the cursor to select "Zoom Mode" option, there are four options for you to select: "Zoom", "Cinema" and "Normal"."Wide",
Press t/u key to select zoom mode you desired.
4. Noise Reduction
In "Setup" submenu, use ▲/q key to move the cursor to "Noise Reduction" option, there are four options for you to select: "Off", "Weak", "Middle" and "Strong". Press
t/u key to select noise reduction you desired.
5. Advance In "setup” submenu, use ▲/▼ key to move the cursor to the "Advance" option, then use
t/u key to adjust the related value. This function is only available for VGA.
Menu system instruction
1) H-POS
In "Advance” submenu, use ▲/q key to move the cursor to the "H-POS” option, then press t/u key to adjust the value.
2) V-POS In "Advance” submenu, use ▲/q key to move the cursor to the “ ” option, V-POS
to adjust the value.then presst/u key
3) CLOCK In "Advance” submenu, use ▲/q key to move the cursor to the “ ” option, CLOCK
to adjust the value.then presst/u key
4) PHASE In "Advance” submenu, use ▲/q key to move the cursor to the “ ” option, PHASE
to adjust the value.then presst/u key
5) AUTO In "Advance” submenu, use ▲/q key to move the cursor to the “ ” option, AUTO
then press u key this option will auto adjust the H-POS,V-POS,CLOCK and PHASE of the VGA picture.
27
Note: In the VGA mode, you can only choose “Normal” and “Wide”.In the mode of “Component”and “HDMI”, you can only choose the “Wide”, “Cinema”and “Zoom”.
6. DLC(Dynamic Luminance Control)
In "Setup" submenu, use ▲/q key to move the cursor to select "DLC" option, then
press t or u key to select "On" or "Off".
7. Restore Default
In "Setup" submenu, use ▲/q key to move the cursor to select "Restore Default"
option, then press or u key to enter "Restore Default" submenu. Use t/u key to ENTER select "Yes" or "No", then press “ ” to confirm. If you select "Yes", all settings ENTER restored default settings.will be
Lock
Press MENU key to display the main menu on
the screen,use key to select“Lock”option,
then press or ENTER u key to enter “Enter
Password” input the password to enter “Lock”
submenu (the default and universal password
is 0000) .
t/u
28
Menu system instruction
1. Change Password
In “Lock” submenu, use ▲/▼ key to move the
cursor to select "Change Password" option,
then press 0-9 digital keys to enter "Change
Password" submenu. Use digital keys on the
remote to change the password. Only when
you input the same password twice, the
password is set successfully.
2. System Lock
In "Lock" submenu, use ▲/▼ key to move the
cursor to select “ ” option, then System Lock
use key to select "On" or "Off".t/u
Note: Only when the “ ” is "On", System Lock
you can use ▲/▼ key to move the
cursor to "US", "Canada" and "Reset
RRT".
3. US
In “Lock” submenu, use ▲/▼ key to move the
cursor to select "US" option, then press or ENTER
key to enter u "US" submenu.
Lock
30
1. Turn On the TV and then press "AV/TV/DVD" button of the remote controller,
switch into DVDthe TV will mode.
2. Place a disc horizontally into the disc slot, it will then be automatically loaded into
the mechanism.
NOTE: Another disc can not be loaded if there is already one in mechanism.
b. No disc in mechanism, it will be initialized when the power turns on (automatically
loads in about 7 seconds).
c. When it ejects, the disc will be automatically reload after about 10 seconds later if
not removed.
d. Compatible with both 12CM disc.
a) Menu Play (compatible with DVD VCD2.0 discs)
I. Stop
1) When you press the Stop button for the first time, the player to pre-stop mode.
2) In pre-stop mode , the player remembers where you have stopped, when you start
playing the disc again, the DVD player will pick up where you stopped.
b) Title Play (compatible with DVD discs only).
I. During DVD playback, press the Title button to display the DVD title contents.
c) programme Pla y (compatible with DVD, VCD, CD, JPEG discs) The programme
Playback option allo ws you to enter the order in which you want chapters or tracks to be played, a maximum of 16.
Basic Operation
INITAL SETTING(DVD)
Setup Menu
DVD OPERATION
29
Lock
1) TV
In "US" submenu, use ▲/▼ key to move the cursor to select "TV" option, then
press ENTER or key to enter u "TV" submenu. Use▲/▼and key to select the t/u
option you desired. Press key to lock the option.ENTER
2) MPAA
In "US" submenu, use ▲/▼ key to move the cursor to select "MPAA" option. There
are seven options for you to select : "R", "NC-17", "X", "N/A", "G", "PG"and"PG-13",
press key to select the option you desired. t/u
4. Canada
In "Lock" submenu, use ▲/▼ key to move the cursor to select "Canada " option, then
press or key to enter ENTER u "Canada " submenu.
1) Canada English
In "Canada" submenu, use ▲/▼key to move the cursor to select "Canada "
option. There are seven options for you to select: "C", "C8+", "G", "PG", "14+",
"18+" and "E". Press key to select the option you desired. t/u
2) Canada French
In "Canada" submenu, use ▲/▼ key to move the cursor to select "Canada "
option. There are six options for you to select : "E", "G", "8ans+", "13ans+",
"16ans+" and "18ans+". Press key to select the option you desired.t/u
5. Reset RRT
In "Lock" submenu, use key to move the cursor to select▲/▼ "Reset RRT " option,
then press or ENTER u key to enter "Reset RRT "submenu. Use key to select "Yes" t/u
or "No", then press “ ” to confirm. If you select "Yes", all RRT settings will be ENTER
restored default settings.
English
French
Menu system instruction
31 32
TV
CLOSED
TV TYPE:According to the COLOR Type of the TV,you can choose the TV Typeaccording to your TV.NOTE:AUTO type is recommended.
1.
2.3.
4.
5.
1.
2.
3.
4. DEFAULT: Back to the factory setting.
8
MUTE
TroubleshootingDVD remote control
33
Picture defects and the reason
MSD119