190429 ess xxxxxx kabelverschraubung 07 4930 …pg 21 28,3 – 28,5 pg 29 37,0 – 37,3 pg 36 47,0...
TRANSCRIPT
Ex d/e Gland Ex d/e GlandEx d/e Gland
Grounding Cone
ArmourReduction Grounding
CroneShieldingCrone
07-9430-12 &07-9430-12*****T
07-9430-22 &07-9430-22*****T
07-9430-32 & 07-9430-32*****T
Safety, maintenance and mounting instructions
1
3 4 5 6
2 Content Markings and applicable standards
Mounting instruction 07-9430-12
Mounting instruction 07-9430-12 and 07-9430-51
IP Protection for non-threaded holes
IP Protection for threaded hole
Technical specifi cation table and product parts
Technical specifi cation table
Product parts
Markings
Applicable standards
CESI 18 ATEX 039X IECEx CES 18.0041XGlands Types
BARTEC GmbHMax-Eyth-Straße 1697980 Bad Mergentheim Germany www.bartec.de
07-9430-12******07-9430-22******07-9430-41******07-9430-51******07-9430-32******07-9430-12*****T07-9430-22*****T07-9430-32*****T
07-9430-41******07-9430-51******
1 — Markings and applicable standards
2 — Technical specifi cation table and product parts
3 — Mounting instruction 07-9430-12******
4 — Mounting instruction 07-9430-12****** and 007-9430-51******
5 — IP Protection for non-threaded hole
6 — IP Protection for threaded hole
7 — Safety instruction
8 — Preperation of cables
9 — 07-9430-12****** Size table
10 — 07-9430-22****** Size table
11 — 07-9430-32****** Size table
12 — 07-9430-41****** Size table
13 — 07-9430-51****** Size table
BARTEC 07-9430-12******
GROUP I 0044 I M2 Ex db I Mb Ex eb I Mb IP66/68 Ta -60 °C to +80 °C CESI 18 ATEX 039 IECEX CES 18.0041X
GROUP II 0044 II 2GD Ex db IIC Gb Ex eb IIC Gb Ex tb IIIC Db Ta-60 °C +130 °C IP66/68 CESI 18 ATEX 039 IECEX CES 8.0041X
BARTEC 07-9430-12*****T GROUP II 0044
II 2GD Ex db IIC Gb Ex eb IIC Gb Ex tb IIIC Db Ta-60 °C +130 °C IP66/68 CESI 18 ATEX 039 IECEX CES 8.0041X
BARTEC 07-9430-41****** GROUP II 0044
II 2GD Ex db IIC Gb Ex eb IIC Gb Ex tb IIIC Db Ta-60 °C +130 °C CESI 18 ATEX 039 IECEX CES 18.0041X
BARTEC 07-9430-51****** GROUP I 0044
I M2 Ex db I Mb Ex eb I Mb IP66/68 Ta -60 °C to +80 °CCESI 18 ATEX 039 IECEX CES 18.0041X
DIRECTIVE 2014/34/EU EN/IEC 60079-7
EN/IEC 60079-0 EN/IEC 60079-31
EN/IEC 60079-1 EN/IEC 60529
Types Sizes Group Body Material Temperature
From To Group I Group II Brass
Group III Stainless Steel Aluminium Chloroprene Silicone
Galvanised Steel
079430-12*****
M12 M110 NO YES YES NO -40 °C to +100 °C -60 °C to +130 °C
M20 M90 YES NO YES NO -40 °C to +80 °C -60 °C to +80 °C
M25 M75 NO YES NO YES -40 °C to +80 °C -60 °C to +80 °C
07-9430-22*****M12 M110 NO YES YES NO -40 °C to +100 °C -60 °C to +130 °C
M25 M75 NO YES NO YES -40 °C to +80 °C -60 °C to +80 °C
07-9430-32*****M12 M110 NO YES YES NO -40 °C to +100 °C -60 °C to +130 °C
M25 M75 NO YES NO YES -40 °C to +80 °C -60 °C to +80 °C
07-9430-41***** M16 M90 NO YES YES NO -40 °C to +100 °C -60 °C to +80 °C
07-9430-51***** M16 M90 YES NO YES NO -40 °C to +100 °C -60 °C to +80 °C
07-9430-12*****T M20 M130 YES YES YES NO -40 °C to +100 °C -60 °C to +80 °C
07-9430-22*****T M20 M32 NO YES YES NO -40 °C to +100 °C -60 °C to +80 °C
07-9430-32*****T M20 M130 NO YES YES NO -40 °C to +100 °C -60 °C to +80 °C
Min. temperature is limited by-50 °C when the gland is used with fi ber washer.
Choose the optimal cable according to clamping ranges submitted in the certifi cate and prepare the cable for installation. All Sub-Parts requiredfor installation are shown respectively above.
Choose the optimal cable according toclamping ranges submitted in the certifi cate and prepare the cable for installation. All Sub-Parts required for installation are shown respectively above.
Insert the cable to the inside of upper body and then mount with lower body as shown. Ensure that Armours of the cable remains above the grounding cone.
Insert the cable to the inside of cable gland. Adjust the free length of the cable inside the enclosure and tighten the gland cap with suffi cient torque.
Tighten the upper body with suffi cient torque value . For torque values please refer the tables „Sizes and torque of cable glands“.Visually check if armour is securely clamped. If not, repeat the clamping process.
Separate lower body and upper body from each other so that ensure the grounding cone is visible in the lower body. Mount the lower body to the appropriate opening on enclosure and tighten with suffi cient torque value. Use locknut to tighten if the enclosure is nonthreaded.
Mount the cable gland to the appropriateopening on the enclosure. Tighten the gland with suffi cient torque value or uselocknut to tighten if the enclosure is non-threaded.
Recomended Hole Diameters For Non Threaded enclosure applications in relation with the used thread types are shown below.
Ingress Protection: In order to guarantee the specifi ed IP66/68 rating, sealant agent shall be applied on at least two full threads before fi tting the gland to the box. In any case you must pay attention to guarantee the metallic continuity. For threaded enclosures min. wall thickness must be equal to the thickness of the relevant locknut.
Step 1 Step 1Step 2 Step 2
Step 3 Step 3Step 4 Step 4
Metric threads G Threads (GAS UNI ISO 228/1) PG Threads
– For non-threaded enclosures it is recomended to use fl at washer, between the gland body and enclosure.
– The recomended wall thickness is 1,5 mm for non threaded enclosures.
– In case of enclosure wall thickness is equal or lower than 1,5 mm, BARTEC fl at washer should be used. Oring can stay in the channel if it is necessary. During the assembly it is recommended to rotate the locknut. If the assembly needs to be done by rotating the gland, then oring should be preferred.
Ex d Execution:
– The wall has to be thick enough to engage at least 5 full threads.
Ex e & Ex tb Execution:
– For Ex eb applications please refer to NPT ANSI B1.20.1 standard.
Thread Hole Diameter(min. – max. mm)
M12x1.5 12,0 – 12,2
M16x1.5 16,0 – 16,2
M20x1.5 20,0 – 20,2
M25x1.5 25,0 – 25,2
M32x1.5 32,0 – 32,3
M40x1.5 40,0 – 40,3
M50x1.5 50,0 – 50,3
M63x1.5 63,0 – 63,3
M75x1.5 75,0 – 75,3
M90x1.5 90,0 – 90,3
M100x1.5 100,0 – 100,3
M110x1.5 110,0 – 110,3
M115x2.0 115,0 – 115,3
M130x2.0 130,0 – 130,3
Thread Hole Diameter(min. – max. mm)
G 1/4" 13,2 – 13,4
G 3/8" 16,6 – 16,8
G 1/2" 21,0 – 21,2
G 3/4" 26,4 – 26,6
G 1" 33,3 – 33,6
G 1 1/4" 41,9 – 42,2
G 1 1/2" 47,8 – 48,1
G 2" 59,6 – 59,9
G 2 1/2" 75,2 – 75,5
G3" 87,9 – 88,2
G3 1/2" 100,4 – 100,7
G4" 113,1 – 113,4
G5" 138,5 – 138,8
Thread Hole Diameter(min. – max. mm)
PG 9 15,2 – 15,4
PG 11 18,6 – 18,8
PG 13,5 20,4 – 20,6
PG 16 22,5 – 22,7
PG 21 28,3 – 28,5
PG 29 37,0 – 37,3
PG 36 47,0 – 47,3
PG 42 54,0 – 54,3
PG 48 59,3 – 59,6
Ex d Execution:
– Assemble the gland with o-ring or fl at washer through the threaded hole.
– The wall has to be thick enough to engage at least 5 full threads.
– The minimum engaged thread depth must be at least 8 mm.
Ex e & Ex tb Execution:
– Assemble the gland with o-ring or fl atwasher through the threaded hole.
– You have to observe the minimum wall thickness of 1,5 mm.
Ex d Cable Gland
Lock Nut
Flat Washer
EnclosureWall Thickness
IP Protection for Cylindrical Threaded Joints
NPT" Minimum Engaged Thread Depthmm inch
1/4 7,055 0,277
3/8 7,055 0,277
1/2 9,070 0,357
3/4 9,070 0,357
1 11,045 0,434
1 1/4 11,045 0,434
1 /2 11,045 0,434
2 11,045 0,434
2 1/2 15,875 0,625
3 15,875 0,625
3 1/2 15,875 0,625
4 15,875 0,625
5 15,875 0,625
Ex d Cable Gland
EnclosureWall Thickness
IP Protection for Tapered Threaded Joints
01-9430-7C0001-04/19-ESS-430879
9
13
7
11
10 8
12
07-9430-12 Size table
07-9430-51 Size table
Safety instruction
Universal 07-9430-32 Size table
Offshore 07-9430-22Size table
Preperation of cables
07-9430-41 Size table
– Qualifi ed personnel in compliance with the national laws shall carry out the main-tanence in accordance with EN/IEC 60079-17 and installation in accordance with EN/IEC 60079-14.
– Changes to products are not allowed.
– Only BARTEC spare parts must be used.
– The maintenance operations must be carried out only after the engine has been cut-off from mains or from the related electrical appliance.
– The following instructions must be strictly followed in order to get a correct installation.
– The clamping of the cables must be realised outside of enclosure by appropriate torque values to guarantee the mechanical characteristics.
– The cable glands can be used with Ex i circuits.
– The cable glands are only suitable for fi xed installations. Cables shall be effectively clamped to prevent pulling or twisting.
– The cable gland installation shall be done according to safety manufacturer instructions to maintain degree of protection.
– Cable gland installation shall be done taking into account the temperature range declared for cable glands in relation to protection mode execution, versus the ambient temperature proper of installation.
– The certifi cate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the standards listed in the fi rst page of the manual.
– The certifi cate does not cover hazards coming from environmental conditions different from those clearly and precisely indicated in clause 1 of EN 60079-0.
– Service temperature of the gland is related to the material of the sealing ring but can additionally be limited by the material of the fl at washer/O-ring/accessories.
Please refer to the fi gure below, for details about the preperation of steel wire armour, braided and metal tape shielded cables for fi tting into the cable gland.
Composition of armour - h min. = height (h1) of armour tightening cone + 2 mm max.
h1
h h h
Size Clamping Range ArmorØ min-max
Armor WireØ min-max
mm
Upper BodyTighteningTorques
CapTighteningTorques
Part Number
Lower Sealmm
Upper Sealmm [Nm] [Nm]
M12x1.5 2,0 – 4,03,0 – 7,5
3,0 – 5,56,0 –12,0
0,10 – 0,400,70 – 1,20
1327
1325
*07-9430-12M0**R*07-9430-12M0**O
M16x1.5 3,0 – 8,56,0 – 12,0
6,0 – 12,08,5 –16,0
0,70 – 1,200,70 – 1,25
2749
2528
*07-9430-12M1**R*07-9430-12M1**O
M20x1.53,0 – 8,5
6,0 – 12,08,5 – 14,5
6,0 – 12,08,5 –16,0
12,0 – 20,0
0,70 – 1,200,70 – 1,250,90 – 1,30
274933
252833
07-9430-12M2**R07-9430-12M2**O 07-9430-12M2**L
M25x1.5
3,0 – 8,56,0 – 12,08,5 – 16,0
12,0 – 20,0
6,0 – 12,08,5 –16,0
12,0 – 21,016,0 – 26,0
0,70 – 1,200,70 – 1,250,70 – 1,201,30 – 1,70
27493361
25283332
07-9430-12M3**G07-9430-12M3**R07-9430-12M3**O07-9430-12M3**L
M32x1.56,0 – 12,0
12,0 – 20,015,0 – 26,0
8,5 –16,016,0 – 26,020,0 –33,0
0,70 – 1,251,30 – 1,701,20 – 1,80
496186
283240
07-9430-12M4**G07-9430-12M4**R07-9430-12M4**O
M40x1.512,0 – 20,015,0 – 26,020,0 – 32,0
16,0 – 26,020,0 –33,029,0 –41,0
1,30 –1,701,20 –1,801,60 – 2,20
6186
110
324075
07-9430-12M5**G07-9430-12M5**R07-9430-12M5**O
M50x1.5
15,0 – 26,020,0 – 32,022,0 – 35,027,0 – 41,0
20,0 –33,029,0 –41,033,0 – 48,036,0 – 52,0
1,20 – 1,801,60 – 2,202,00 – 2,801,80 – 2,80
86110110125
40757575
07-9430-12M6**G07-9430-12M6**M07-9430-12M6**R07-9430-12M6**O
M63x1.5
22,0 – 35,027,0 – 41,035,0 – 45,040,0 – 52,045,0 – 56,0
33,0 – 48,036,0 – 52,043,0 – 57,047,0 – 60,054,0 – 70,0
2,00 – 2,801,80 – 2,801,80 – 2,801,80 – 2,801,30 – 2,50
110125160250250
7575
140100150
07-9430-12M7**G07-9430-12M7**M07-9430-12M7**R07-9430-12M7**O07-9430-12M7**L
M75x1.535,0 – 45,040,0 – 52,045,0 – 60,0
43,0 – 57,047,0 – 60,054,0 – 70,0
1,80 – 2,801,80 – 2,801,30 – 2,30
160250250
140100150
07-9430-12M8**G07-9430-12M8**R07-9430-12M8**O
M90x1.540,0 – 52,045,0 – 60,060,0 – 72,0
47,0 – 60,054,0 – 70,063,0 – 80,0
1,80 – 2,801,00 – 2,301,00 –3,50
250250320
100150210
*07-9430-12M9**G*07-9430-12M9**R*07-9430-12M9**O
M110x1.5 45,0 – 60,060,0 – 72,0
54,0 – 70,063,0 – 80,0
1,00 – 2,301,00 –3,50
250320
150210
*07-9430-12MB**R*07-9430-12MB**O
* These sizes are only available as GroupII-III
M20x1.5 8,5 – 14,5 12,0 –20,0 1,0 – 1,2 33 33 07-9430-12M2**OT
M25x1.5 8,5 – 14,58,5 – 16,0
12,0 – 20,012,0 – 21,0
1,0 – 1,20,7 – 09
3330
3327
07-9430-12M3**MT07-9430-12M3**OT
M32x1.5 8,5 – 16,0 12,0 – 21,0 0,7 – 09 30 27 07-9430-12M4**MT
M90x2.0 70,0 –82,0 78,0 – 90,0 1,5 – 4,4 450 280 07-9430-12M9**LT
M100x2.0 80,0 –92,0 88,0 – 100,0 1,2 – 4,0 470 390 07-9430-12MA**OT
M110x2.0 90,0 –101,0 98,0 – 110,0 2,1 –5,4 500 400 07-9430-12MB**OT
M130x2.0 100,0 – 115,0 109,0 – 123,0 2,0 –5,4 550 450 07-9430-12MD**OT
Size Clamping RangeØ min-max
mm
Cap TighteningTorques
[Nm]
Part Number
M16x1.5 3,0 – 8,56,0 – 12,0
3035
07-9430-41M1**O07-9430-41M1**L
M20x1.5 6,0 – 12,012,0 – 14,5
3533
07-9430-41M2**O 07-9430-41M2**L
M25x1.56,0 – 12,0
12,0 – 16,012,0 – 20,0
353061
07-9430-42M3**R07-9430-42M3**O07-9430-42M3**L
M32x1.5 12,0 – 20,015,0 – 26,0
6186
07-9430-41M4**R07-9430-41M4**O
M40x1.5 15,0 – 26,020,0 – 32,0
86110
07-9430-41M5**R07-9430-41M5**O
M50x1.5 22,0 – 35,027,0 – 41,0
110125
07-9430-42M6**R07-9430-42M6**O
M63x1.5 35,0 – 45,040,0 – 52,0
165250
07-9430-41M7**R07-9430-41M7**O
M75x1.5 35,0 – 45,040,0 – 52,0
250250
07-9430-41M8**R07-9430-41M8**O
M90x1.5 45,0 – 60,060,0 – 72,0
250210
07-9430-41M9**R07-9430-41M9**O
Size Clamping RangeØ min-max
mm
Cap TighteningTorques
[Nm]
Part Number
M16x1.53,0 – 8,56,0 – 9,09,0 –12,0
315050
07-9430-51M1**R07-9430-51M1**O07-9430-51M1**L
M20x1.5
6,0 – 9,09,0 –12,08,5 – 11,511,5 –14,5
35353535
07-9430-51M2**R07-9430-51M2**O07-9430-51M2**M07-9430-51M2**M
M25x1.5
6,0 – 9,09,0 –12,08,5 – 12,512,5 –16,016,0 – 20,0
5051515050
07-9430-51M3**G07-9430-51M3**R07-9430-51M3**O07-9430-51M3**M07-9430-51M3**L
M32x1.5
12,0 – 16,016,0 – 20,015,0 –20,020,0 – 26,0
100100100100
07-9430-51M4**R07-9430-51M4**O07-9430-51M4**M07-9430-51M4**L
M40x1.5
15,0 –20,020,0 – 26,020,0 – 26,026,0– 32,0
110 110110110
07-9430-51M5**R07-9430-51M5**O07-9430-51M5**M07-9430-51M5**L
M50x1.5
22,0 – 28,028,0 – 35,02700 – 34,034,0 – 41,0
130130130130
07-9430-51M6**R07-9430-51M6**O07-9430-51M6**M07-9430-51M6**L
M63x1.5
35,0 – 40,040,0 – 45,040,0 – 46,046,0 –52,0
200200200200
07-9430-51M7**R07-9430-51M7**O07-9430-51M7**M07-9430-51M7**L
M75x1.5
40,0 – 46,046,0 –52,045,0 – 52,052,0 – 60,0
300300300300
07-9430-51M8**R07-9430-51M8**O07-9430-51M8**M07-9430-51M8**L
M90x1.5
45,0 – 52,052,0 – 60,060,0 – 66,066,0 – 72,0
350350350350
07-9430-51M9**R07-9430-51M9**O07-9430-51M9**M07-9430-51M9**L
Size Clamping Range ArmorØ min-max
Armor WireØ min-max
mm
Upper BodyTighteningTorques
CapTighteningTorques
Part Number
Lower Sealmm
Upper Sealmm [Nm] [Nm]
M12x1.5 3,0 – 7,5 6,0 –12,0 0,20 – 0,50 27 25 *07-9430-22M0**O
M16x1.5 3,0 – 8,56,0 – 12,0
6,0 – 12,08,5 –16,0
0,20 – 0,500,20 – 0,50
2749
2528
*07-9430-22M1**R*07-9430-22M1**O
M20x1.53,0 – 8,5
6,0 – 12,08,5 – 14,5
6,0 – 12,08,5 –16,0
12,0 – 20,0
0,20 – 0,500,20 – 0,500,20 – 0,50
274933
252833
07-9430-22M2**R07-9430-22M2**O 07-9430-22M2**L
M25x1.5
3,0 – 8,56,0 – 12,08,5 – 16,0
12,0 – 20,0
6,0 – 12,08,5 –16,0
12,0 – 21,016,0 – 26,0
0,20 – 0,500,20 – 0,500,20 – 0,400,20 – 0,50
27493361
25283332
07-9430-22M3**G07-9430-22M3**R07-9430-22M3**O07-9430-22M3**L
M32x1.56,0 – 12,0
12,0 – 20,015,0 – 26,0
8,5 –16,016,0 – 26,020,0 –33,0
0,20 – 0,500,20 – 0,500,30 – 0,80
496186
283240
07-9430-22M4**G07-9430-22M4**R07-9430-22M4**O
M40x1.512,0 – 20,015,0 – 26,020,0 – 32,0
16,0 – 26,020,0 –33,029,0 –41,0
0,20 – 0,500,30 – 0,800,15 – 0,75
6186
110
324075
07-9430-22M5**G07-9430-22M5**R07-9430-22M5**O
M50x1.5
15,0 – 26,020,0 – 32,022,0 – 35,027,0 – 41,0
20,0 –33,029,0 –41,033,0 – 48,036,0 – 52,0
0,30 – 0,800,15 – 0,750,25 – 0,900,25 – 1,30
86110110125
40757575
07-9430-22M6**G07-9430-22M6**M07-9430-22M6**R07-9430-22M6**O
M63x1.5
22,0 – 35,027,0 – 41,035,0 – 45,040,0 – 52,0
33,0 – 48,036,0 – 52,043,0 – 57,047,0 – 60,0
0,25 – 0,900,25 – 1,300,40 – 1,100,30 – 1,30
110125160250
7575
140100
07-9430-22M7**G07-9430-22M7**M07-9430-22M7**R07-9430-22M7**O
M75x1.535,0 – 45,040,0 – 52,045,0 – 60,0
43,0 – 57,047,0 – 60,054,0 – 70,0
0,40 – 1,100,30 – 1,300,30 – 1,40
160250250
140100150
07-9430-22M8**G07-9430-22M8**R07-9430-22M8**O
M90x1.540,0 – 52,045,0 – 60,060,0 – 72,0
47,0 – 60,054,0 – 70,063,0 – 80,0
0,30 – 1,300,30 – 1,400,30 – 3,30
250250320
100150210
*07-9430-22M9**G*07-9430-22M9**R*07-9430-22M9**O
M110x1.5 45,0 – 60,060,0 – 72,0
54,0 – 70,063,0 – 80,0
0,30 – 1,400,30 – 3,30
250320
150210
*07-9430-22MB**R*07-9430-22MB**O
* These sizes are only available as GroupII-III
M20x1.5 8,5 – 14,5 12,0 –20,0 0,20 – 0,50 33 33 07-9430-12M2**OT
M25x1.5 8,5 – 14,58,5 – 16,0
12,0 – 20,012,0 – 21,0
0,20 – 0,500,45 – 0,65
3330
3327
07-9430-12M3**MT07-9430-12M3**OT
M32x1.5 8,5 – 16,0 12,0 – 21,0 0,45 – 0,65 30 27 07-9430-12M4**MT
Size Clamping Range ArmorØ min-max
Armor WireØ min-max
mm
Shield WireØ min-max
mm
Upper BodyTighteningTorques
CapTighteningTorques
Part Number
Lower Sealmm
Upper Sealmm [Nm] [Nm]
M12x1.5 3,0 – 7,5 6,0 –12,0 0,70 – 1,20 0,2 – 0,5 27 25 *07-9430-32M0**O
M16x1.5 3,0 – 8,56,0 – 12,0
6,0 – 12,08,5 –16,0
0,70 – 1,200,70 – 1,25
0,2 – 0,50,2 – 0,5
2749
2528
*07-9430-32M1**R*07-9430-32M1**O
M20x1.53,0 – 8,5
6,0 – 12,08,5 – 14,5
6,0 – 12,08,5 –16,0
12,0 – 20,0
0,70 – 1,200,70 – 1,250,90 – 1,30
0,2 – 0,50,2 – 0,50,2 – 0,5
274933
252833
07-9430-32M2**R07-9430-32M2**O 07-9430-32M2**L
M25x1.5
3,0 – 8,56,0 – 12,08,5 – 16,0
12,0 – 20,0
6,0 – 12,08,5 –16,0
12,0 – 21,016,0 – 26,0
0,70 – 1,200,70 – 1,250,70 – 1,201,30 – 1,70
0,2 – 0,50,2 – 0,50,5 – 0,70,2 – 0,5
27493361
25283332
07-9430-32M3**G07-9430-32M3**R07-9430-32M3**O07-9430-32M3**L
M32x1.56,0 – 12,0
12,0 – 20,015,0 – 26,0
8,5 –16,016,0 – 26,020,0 –33,0
0,70 – 1,251,30 – 1,701,20 – 1,80
0,2 – 0,50,2 – 0,50,2 – 0,8
496186
283240
07-9430-32M4**G07-9430-32M4**R07-9430-32M4**O
M40x1.512,0 – 20,015,0 – 26,020,0 – 32,0
16,0 – 26,020,0 –33,029,0 –41,0
1,30 –1,701,20 –1,801,60 – 2,20
0,2 – 0,50,2 – 0,80,2 – 0,8
6186
110
324075
07-9430-32M5**G07-9430-32M5**R07-9430-32M5**O
M50x1.5
15,0 – 26,020,0 – 32,022,0 – 35,027,0 – 41,0
20,0 –33,029,0 –41,033,0 – 48,036,0 – 52,0
1,20 – 1,801,60 – 2,202,00 – 2,801,80 – 2,80
0,2 – 0,80,2 – 0,80,2 – 1,00,3 – 1,4
86110110125
40757575
07-9430-32M6**G07-9430-32M6**M07-9430-32M6**R07-9430-32M6**O
M63x1.5
22,0 – 35,027,0 – 41,035,0 – 45,040,0 – 52,0
33,0 – 48,036,0 – 52,043,0 – 57,047,0 – 60,0
2,00 – 2,801,80 – 2,801,80 – 2,801,80 – 2,80
0,2 – 1,00,3 – 1,40,3 – 1,00,6 – 1,5
110125160250
7575
140100
07-9430-32M7**G07-9430-32M7**M07-9430-32M7**R07-9430-32M7**O
M75x1.535,0 – 45,040,0 – 52,045,0 – 60,0
43,0 – 57,047,0 – 60,054,0 – 70,0
1,80 – 2,801,80 – 2,801,30 – 2,30
0,3 – 1,00,6 – 1,50,2 –1,2
160250250
140100150
07-9430-32M8**G07-9430-32M8**R07-9430-32M8**O
M90x1.540,0 – 52,045,0 – 60,060,0 – 72,0
47,0 – 60,054,0 – 70,063,0 – 80,0
1,80 – 2,801,00 – 2,301,00 –3,50
0,6 – 1,50,2 –1,20,2 –1,9
250250320
100150210
*07-9430-32M9**G*07-9430-32M9**R*07-9430-32M9**O
M110x1.5 45,0 – 60,060,0 – 72,0
54,0 – 70,063,0 – 80,0
1,00 – 2,301,00 –3,50
0,2 – 1,20,2 – 1,9
250320
150210
*07-9430-32MB**R*07-9430-32MB**O
* These sizes are only available as GroupII-III
M20x1.5 8,5 – 14,5 12,0 –20,0 1,0 – 1,2 0,2 – 0,5 33 33 07-9430-32M2**OT
M25x1.5 8,5 – 14,58,5 – 16,0
12,0 – 20,012,0 – 21,0
1,0 – 1,20,7 – 09
0,2 – 0,50,5 – 0,7
3330
3327
07-9430-32M3**MT07-9430-32M3**OT
M32x1.5 8,5 – 16,0 12,0 – 21,0 0,7 – 09 0,5 – 0,7 30 27 07-9430-32M4**MT
M90x2.0 70,0 –82,0 78,0 – 90,0 1,5 – 4,4 0,2 –2,4 450 280 07-9430-32M9**LT
M100x2.0 80,0 –92,0 88,0 – 100,0 1,2 – 4,0 0,2 – 2,2 470 390 07-9430-32MA**OT
M110x2.0 90,0 –101,0 98,0 – 110,0 2,1 –5,4 0,2 – 3,1 500 400 07-9430-32MB**0T
M130x2.0 100,0 – 115,0
109,0 – 123,0 2,0 –5,4 0,2 – 3,0 550 450 07-9430-32MD**OT
01-9430-7C0001-04/19-ESS-430879