1.9.0 software mcafee virusscan enterprise for linux · pdf file2 mcafee virusscan enterprise...

Installation Guide

McAfee VirusScan Enterprise for Linux1.9.0 Software

COPYRIGHTCopyright © 2013 McAfee, Inc. Do not copy without permission.

TRADEMARK ATTRIBUTIONSMcAfee, the McAfee logo, McAfee Active Protection, McAfee AppPrism, McAfee Artemis, McAfee CleanBoot, McAfee DeepSAFE, ePolicy Orchestrator,McAfee ePO, McAfee EMM, McAfee Enterprise Mobility Management, Foundscore, Foundstone, McAfee NetPrism, McAfee Policy Enforcer, Policy Lab,McAfee QuickClean, Safe Eyes, McAfee SECURE, SecureOS, McAfee Shredder, SiteAdvisor, SmartFilter, McAfee Stinger, McAfee Total Protection,TrustedSource, VirusScan, WaveSecure, WormTraq are trademarks or registered trademarks of McAfee, Inc. or its subsidiaries in the United States andother countries. Other names and brands may be claimed as the property of others.

LICENSE INFORMATION

License AgreementNOTICE TO ALL USERS: CAREFULLY READ THE APPROPRIATE LEGAL AGREEMENT CORRESPONDING TO THE LICENSE YOU PURCHASED, WHICH SETSFORTH THE GENERAL TERMS AND CONDITIONS FOR THE USE OF THE LICENSED SOFTWARE. IF YOU DO NOT KNOW WHICH TYPE OF LICENSE YOUHAVE ACQUIRED, PLEASE CONSULT THE SALES AND OTHER RELATED LICENSE GRANT OR PURCHASE ORDER DOCUMENTS THAT ACCOMPANY YOURSOFTWARE PACKAGING OR THAT YOU HAVE RECEIVED SEPARATELY AS PART OF THE PURCHASE (AS A BOOKLET, A FILE ON THE PRODUCT CD, OR AFILE AVAILABLE ON THE WEBSITE FROM WHICH YOU DOWNLOADED THE SOFTWARE PACKAGE). IF YOU DO NOT AGREE TO ALL OF THE TERMS SETFORTH IN THE AGREEMENT, DO NOT INSTALL THE SOFTWARE. IF APPLICABLE, YOU MAY RETURN THE PRODUCT TO MCAFEE OR THE PLACE OFPURCHASE FOR A FULL REFUND.

2 McAfee VirusScan Enterprise for Linux 1.9.0 Software Installation Guide

Contents

Preface 5About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5What's in this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Find product documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1 Introduction 7Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7What’s new in this release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2 System Requirements 11Hardware and software requirements . . . . . . . . . . . . . . . . . . . . . . . . . 11

3 Installation 13Manual installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Silent installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Running McAfee VirusScan Enterprise for Linux . . . . . . . . . . . . . . . . . . . . . . 18Upgrading from previous versions . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Integrating with ePolicy Orchestrator . . . . . . . . . . . . . . . . . . . . . . . . . . 18Removing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Index 21

McAfee VirusScan Enterprise for Linux 1.9.0 Software Installation Guide 3

Contents


Preface

This guide provides the information you need to install your McAfee product. This guide provides theinformation you need to install McAfee

®

VirusScan®

Enterprise for Linux.

For instructions on how to configure, use and maintain McAfee VirusScan Enterprise for Linux usingMcAfee® ePolicy Orchestrator (McAfee ePO) software, see the McAfee VirusScan Enterprise for Linux —Configuration Guide for your product version. For detailed information all phases of product use fromconfiguration to troubleshooting, see the McAfee VirusScan Enterprise for Linux — Product Guide foryour product version.

Contents About this guide Find product documentation

About this guideThis information describes the guide's target audience, the typographical conventions and icons usedin this guide, and how the guide is organized.

AudienceMcAfee documentation is carefully researched and written for the target audience.

The information in this guide is intended primarily for:

• Administrators — People who implement and enforce the company's security program.

• Users — People who use the computer where the software is running and can access some or all ofits features.

ConventionsThis guide uses these typographical conventions and icons.

Book title, term,emphasis

Title of a book, chapter, or topic; a new term; emphasis.

Bold Text that is strongly emphasized.

User input, code,message

Commands and other text that the user types; a code sample; a displayedmessage.

Interface text Words from the product interface like options, menus, buttons, and dialogboxes.

Hypertext blue A link to a topic or to an external website.

Note: Additional information, like an alternate method of accessing anoption.


Tip: Suggestions and recommendations.

Important/Caution: Valuable advice to protect your computer system,software installation, network, business, or data.

Warning: Critical advice to prevent bodily harm when using a hardwareproduct.

What's in this guide This guide is organized to help you find the information you need.

This guide provides you with an introduction to McAfee VirusScan Enterprise for Linux and how toinstall and configure the software.

Topics include:

• Introducing McAfee VirusScan Enterprise for Linux

• System requirements and prerequisites before installing the software

• Types of installation such as manual and silent installation

• Detailed instructions on how to set up the software on various platforms

• How to run the software

• Handling old certificates

• Upgrading the software from previous versions

• Removing the software

• Brief description about integrating the software with ePolicy Orchestrator

Find product documentationMcAfee provides the information you need during each phase of product implementation, frominstallation to daily use and troubleshooting. After a product is released, information about the productis entered into the McAfee online KnowledgeBase.

Task1 Go to the McAfee Technical Support ServicePortal at http://mysupport.mcafee.com.

2 Under Self Service, access the type of information you need:

To access... Do this...

User documentation 1 Click Product Documentation.

2 Select a product, then select a version.

3 Select a product document.

KnowledgeBase • Click Search the KnowledgeBase for answers to your product questions.

• Click Browse the KnowledgeBase for articles listed by product and version.

PrefaceFind product documentation


http://mysupport.mcafee.com

1 Introduction

McAfee VirusScan Enterprise for Linux detects and removes viruses and other potentially unwantedsoftware on Linux‑based systems.

This information is intended for network administrators who are responsible for their company’santi‑virus and security program.

Contents Product Features What’s new in this release

Product FeaturesThis section describes the product features for the McAfee VirusScan Enterprise for Linux software.

McAfee VirusScan Enterprise for Linux software has these features:

• Support for Amazon EC2 Linux machines (2.6.x kernels)

• Support for Novell Cluster Services

• Support for Corosync OCFS2 File System Cluster

• Runtime kernel module support (RKMS)

McAfee VirusScan Enterprise for Linux Kernel modules will be created dynamically in case of amod‑version failure. To manually compile the kernel module, refer Frequently asked questions —Runtime kernel module support in the Product Guide.

• Support for 64‑bit AMD64/Intel EM64T operating systems.

• The latest version (5600) of the McAfee anti‑virus engine.

• Incremental Virus Signature (DAT) updates.

• Mod‑versioning for automatic kernel support.

• Regular expression based exclusions for On‑access scan and On‑demand scan from the userinterface.

• Scanning• Comprehensive on‑access anti‑virus scanning and cleaning using the McAfee scanning engine.

• On‑access scanning for local file systems, NFS and Samba/CIFS.

• Kernel‑level scan cache for improved performance.

1


• Scheduling of on‑demand scans.

• Scheduling of updates for scanning engine and virus definition files.

• Administration• Remote administration using browser‑based interface.

• Secure browser interface with authentication and HTTPS (SSL) support.

• Reporting• Real‑time statistics.

• Detailed database for detected items and system events.

• Ability to query the database by date range or individual field values, for example, virus name.Results of query can be exported to a CSV file.

• Configurable email notification for detected items, out‑of‑date virus definition files, configurationchanges, and system events.

• Diagnostic report for use when reporting a problem with the product.

What’s new in this releaseThis section describes the new enhancements in this release of VirusScan Enterprise for Linux.

These new features are available in this release, that could be used from McAfee ePolicy Orchestratorto configure McAfee VirusScan Enterprise for Linux client systems.

General policies

• Enable or disable Web GUI Apache services

• Enable or disable SMTP notifications

• Enable or disable Syslogging with different levels

• Enable logging from ePolicy Orchestrator

On‑Access policy

• Specify primary and secondary actions for Programs and Jokes

On‑Demand scan task

• Specify primary and secondary actions for Programs and Jokes

• Specify custom Maximum scan time for each on‑demand scan task

Product deployment task

• Deploy the product successfully without PAM libraries

Password change task

• Set the McAfee VirusScan Enterprise for Linux administrator password from ePolicy Orchestrator

1 IntroductionWhat’s new in this release


System properties

• Scanning summary information on Files Scanned and Number of Infections for the selected Linux client

• Threat information is available now

Events

• On‑demand scan task status events

• Password change task status events

Queries and reports

• Threat report

• Compliance report

Help Content

New ePolicy Orchestrator Help extension for McAfee VirusScan Enterprise for Linux

IntroductionWhat’s new in this release 1


1 IntroductionWhat’s new in this release


2 System Requirements

This section describes the software and hardware requirements to install VirusScan Enterprise forLinux.

Hardware and software requirementsMake sure that your Linux server meets these requirements.

Supported operating systems (32‑bit/64‑bit)

• SuSE Linux Enterprise 10.x and 11.x (Desktop/Server)

• Red Hat Enterprise 5.x Advanced Platform, Desktop

• Red Hat Enterprise 6.0, 6.1, 6.2, and 6.3 Server, Workstation, Client

• Oracle Enterprise Linux 5.x and 6.x

• Novell Open Enterprise Server 2.x

• CentOS 5.x and 6.x

• Ubuntu 10.04, 11.10, 12.04, and 12.10 (Desktop/Server edition)

To view a complete list of supported environments, see McAfee KnowledgeBase article KB75270.

Supported kernels

• This release supports all kernels available on the supported distributions.

To view a complete list of supported distributions, see McAfee KnowledgeBase article KB72999.

Supported processors

• Intel x86 architecture‑based processor

• Intel x86_64 architecture‑based processor that supports Intel Extended Memory 64 Technology(Intel EM64T)

• AMD x86_64 architecture‑based processor with AMD 64‑bit technology

Memory

• Minimum: 2 GB

• Recommended: 4 GB

2


https://kc.mcafee.com/corporate/index?page=content&id=KB75270

https://kc.mcafee.com/corporate/index?page=content&id=KB72999

Free Disk space

• Minimum: 1 GB

Supported McAfee Management software

• McAfee ePolicy Orchestrator 4.5



Supported McAfee Agent software

• McAfee Agent 4.6

• McAfee Agent 4.8

Display

Monitor screen with a recommended minimum resolution of 1024 x 768.

2 System RequirementsHardware and software requirements


3 Installation

This chapter describes the installation process of VirusScan Enterprise for Linux.

You can install VirusScan Enterprise for Linux manually on hosts (see Manual installation) or you canuse a script (see Silent installation).

Download and extract the VirusScan Enterprise for Linux software package (McAfeeVSEForLinux‑1.9.0.<build number>‑release‑full.noarch.tar.gz) on to a temporary directory.

Contents Manual installation Silent installation Running McAfee VirusScan Enterprise for Linux Upgrading from previous versions Integrating with ePolicy Orchestrator Removing the software

Manual installationDuring installation, you are prompted to supply a password and other information. For most of thequestions, you can accept the default value that is offered.

Before you begin• Make sure that there is no user named as "nails" or group named as "nailsgroup" on the

computer.

• Make sure that you have "root" privileges to install VirusScan Enterprise for Linux.

• If you are installing VirusScan Enterprise for Linux on a 64‑bit RHEL 6.x system, ensurethat 32‑bit RHEL 6.x PAM libraries are also installed.

• If you are installing VirusScan Enterprise for Linux on a 64‑bit Ubuntu system, ensurethat 32‑bit Ubuntu libraries are also installed.

To set up email notification for alerts if it is required, you need a Mail Transfer Agent (MTA) configured,and the following information:

• Email address of the VirusScan administrator

• Address for the SMTP host

• TCP/IP port number for the SMTP host

3


Task1 From the terminal, go to the temporary directory and execute the following commands:

tar ‑zxvf McAfeeVSEForLinux‑1.9.0.<build number>‑release.tar.gztar ‑zxvf McAfeeVSEForLinux‑1.9.0.<build number>‑others.tar.gz

2 To install McAfee Runtime, type the following command in the terminal window:

rpm ‑ivh MFErt.i686.rpm

3 To install McAfee Agent (MA), type the following command in the terminal window:

rpm ‑ivh MFEcma.i686.rpm

4 To confirm that the McAfee Agent is running correctly, type the following command in the terminalwindow:

/etc/init.d/cma status

5 To install VirusScan Enterprise for Linux, type the following command in the terminal window:

bash McAfeeVSEForLinux‑1.9.0.<build number>‑installer

6 Answer the questions when prompted. Accept the default values, or specify your own.

7 When prompted to start the VirusScan services, select the default option Y.

8 To confirm that VirusScan Enterprise for Linux is running correctly, type the following command inthe terminal window:

/etc/init.d/nails status

Tasks• Installing on Novell Open Enterprise Server on page 14

Install VirusScan Enterprise for Linux on Novell Open Enterprise Server.

• Installing on Ubuntu (Desktop or Server edition) on page 15Install VirusScan Enterprise for Linux on Ubuntu Server.

Installing on Novell Open Enterprise ServerInstall VirusScan Enterprise for Linux on Novell Open Enterprise Server.

Task1 From the Novell eDirectory server, use iManager and create a user called "nails" and a group called

"nailsgroup".

2 Add the user "nails" a member of the "nailsgroup". Enable the user and group using the Linux UserManagement.

3 Provide "nails" user with administrative privileges on all the NSS volumes.

rights ‑f /media/nss/<VOL‑name> ‑r s trustee nails.<context>.<tree>

You need to provide administrative privileges to the "nails" user, every time a new NSS volume iscreated.

4 Download the MFErt.i686.rpm and MFEcma.i686.rpm file.

3 InstallationManual installation


5 Install McAfee Runtime and McAfee Agent using the following commands:

rpm ‑ivh MFErt.i686.rpm

rpm ‑ivh MFEcma.i686.rpm

6 To install VirusScan Enterprise for Linux, type this command in the terminal window:


7 Type nailsgroup for the Linux group for VirusScan administrator.

8 Type nails for the VirusScan user.

9 Answer the questions when prompted. Accept the default values, or specify your own.


Installing on Ubuntu (Desktop or Server edition)Install VirusScan Enterprise for Linux on Ubuntu Server.

Before you begin

If you are installing VirusScan Enterprise for Linux on a 64‑bit Ubuntu system, ensure thatyou perform these steps before installation:

1 Copy pam_unix.so and pam_nologin.so from /lib/security of a 32‑bit ubuntu system(till version 10.10) to a temporary directory (/tmp) on the 64‑bit ubuntu system. FromUbuntu 11.04 onwards pam_unix.so and pam_nologin.so are available under the /lib/i386‑linux‑gnu/security directory.

2 In the root ( / ), create a folder pam32lib.

3 Execute the following commands to copy pam_unix32.so and pam_nologin.so to thepam32lib directory:

cp /tmp/pam_unix.so /pam32lib/pam_unix32.so

cp /tmp/pam_nologin.so /pam32lib/pam_nologin32.so

Task1 Download the MFErt.i686.deb and MFEcma.i686.deb file.

2 Install McAfee Runtime and McAfee Agent using these commands:

dpkg ‑i MFErt.i686.debdpkg ‑i MFEcma.i686.deb

3 Type the following at the command prompt:


4 Answer the questions when prompted. Accept the default values, or type your own.


6 To confirm that VirusScan Enterprise for Linux is installed and running correctly, type the followingat the command prompt:


InstallationManual installation 3


Silent installationInstall VirusScan Enterprise for Linux in silent mode.

Before you begin• Before installing VirusScan Enterprise for Linux, make sure that there is no user as

"nails" and no group as "nailsgroup" in the computer.

• Before installing VirusScan Enterprise for Linux, you must have McAfee Runtime andMcAfee Agent already installed on the computer.

• Create a file "nails.options" in the root home (/root) directory.

For example:

SILENT_ACCEPTED_EULA=”yes”SILENT_INSTALLDIR=”/opt/NAI/LinuxShield”SILENT_RUNTIMEDIR=”/var/opt/NAI/LinuxShield”SILENT_ADMIN=”[email protected]”SILENT_HTTPHOST=”0.0.0.0”SILENT_HTTPPORT=”55443”SILENT_MONITORPORT=”65443”SILENT_SMTPHOST=”0.0.0.0”SILENT_SMTPPORT=”25”SILENT_NAILS_USER=”nails”SILENT_NAILS_GROUP=”nailsgroup”SILENT_CREATE_USER=”yes”SILENT_CREATE_GROUP=”yes”SILENT_RUN_WITH_MONITOR=”yes”SILENT_QUARANTINEDIR=”/quarantine”SILENT_START_PROCESSES=”yes”SILENT_CONTINUE_INSTALL_ON_PAM_ERROR=”no”

Use SILENT_CONTINUE_INSTALL_ON_PAM_ERROR only when 32‑bit PAM libraries arenot present.

If you set this flag to yes and continue without Pluggable AuthenticationModule (PAM) libraries, the installation of VirusScan Enterprise for Linuxmonitor component is skipped, and the web interface will not be available.However, you can still manage the VirusScan Enterprise for Linux host usingePolicy Orchestrator or the web interface of some other VirusScan Enterprisefor Linux host. See information about Configuring VirusScan Enterprise forLinux in the Product Guide.

Task1 To install VirusScan Enterprise for Linux, type this command in the terminal window:


2 After performing the installation, use the command passwd to assign a password to the user "nails".

Tasks• Installing on Novell Open Enterprise Server in silent mode on page 17

Install VirusScan Enterprise for Linux on Novell Open Enterprise server in silent mode.

• Installing on Ubuntu (Desktop or Server edition) in silent mode on page 17Install VirusScan Enterprise for Linux on Ubuntu (Desktop/Server edition) in silent mode.

3 InstallationSilent installation


Installing on Novell Open Enterprise Server in silent modeInstall VirusScan Enterprise for Linux on Novell Open Enterprise server in silent mode.

Task1 From the Novell eDirectory server, use iManager and create a user called "nails" and a group called

"nailsgroup".

2 Add the user "nails" a member of the "nailsgroup", enable the user and group using the Linux UserManagement.

3 Provide "nails" user with administrative privileges on all the NSS volumes.

rights ‑f /media/nss/<VOL‑name> ‑r s trustee nails.<context>.<tree>

You need to provide administrative privileges to the "nails" user, every time a new NSS volume iscreated.

4 In the "nails.options" file, check if the following parameters are available:

SILENT_NAILS_USER="nails"SILENT_NAILS_GROUP="nailsgroup"SILENT_CREATE_USER=”no”SILENT_CREATE_GROUP=”no”

5 From the terminal window, type bash McAfeeVSEForLinux‑1.9.0.<build number>‑installer

6 After performing the installation, use iManager to assign a password to the user "nails".

Installing on Ubuntu (Desktop or Server edition) in silent modeInstall VirusScan Enterprise for Linux on Ubuntu (Desktop/Server edition) in silent mode.

Before you beginEnsure that the nails.options file is available in the root home (/root) directory. Forinformation on how to create the nails.options file, refer to the Silent installation section.

If you are installing VirusScan Enterprise for Linux on a 64‑bit Ubuntu system, ensure thatyou perform these steps before installation:

1 Copy pam_unix.so and pam_nologin.so from /lib/security of a 32‑bit ubuntu system(till version 10.10) to a temporary directory (/tmp) on the 64‑bit ubuntu system. FromUbuntu 11.04 onwards pam_unix.so and pam_nologin.so are available under the /lib/i386‑linux‑gnu/security directory.

2 In the root ( / ), create a folder pam32lib.

3 Execute the following commands to copy pam_unix32.so and pam_nologin.so to thepam32lib directory:

cp /tmp/pam_unix.so /pam32lib/pam_unix32.so

cp /tmp/pam_nologin.so /pam32lib/pam_nologin32.so

Task1 Type the following at the command prompt:


2 After performing the installation, use the command passwd to assign a password to the user nails.

InstallationSilent installation 3


Running McAfee VirusScan Enterprise for LinuxUse this task to open the McAfee VirusScan Enterprise for Linux user interface.

Task1 From a supported web‑browser, go to https://<hostname or IP address>:<port number>

Specify the hostname or IP address of the computer, on which VirusScan Enterprise for Linux isinstalled. By default, the port number is "55443".

https://192.168.200.200:55443 (or) https://server1:55443

2 On the log on page, type the user name as nails and type the password that you specified duringinstallation.

If you see messages caused by the use of certificates, see the Handling old certificates section.

Upgrading from previous versionsUpgrade your previous McAfee VirusScan Enterprise for Linux version 1.6, 1.7 or 1.7.1 to version1.9.0.

Task1 To upgrade McAfee Agent, type the following command in the terminal window:

rpm ‑Uvh MFEcma.i686.rpmIf you want to upgrade McAfee Agent on a Ubuntu server, type this command:

dpkg ‑i MFEcma.i686.deb

2 To confirm that McAfee Agent is running correctly, type the following command in the terminalwindow:

/etc/init.d/cma status

3 To upgrade VirusScan Enterprise for Linux, type the following command in the terminal window:


4 To confirm that VirusScan Enterprise for Linux is running correctly, type the following command inthe terminal window:


5 Restart the computer using the command:

reboot

Integrating with ePolicy OrchestratorIntegrate VirusScan Enterprise for Linux with ePolicy Orchestrator to manage client systems.

Before you beginIf you have any VirusScan Enterprise for Linux1.7 or 1.7.1 hotfix checked in to the MasterRepository's Current branch, move the hotfix to previous branch or delete it.

3 InstallationRunning McAfee VirusScan Enterprise for Linux


Task1 Download and extract the VirusScan Enterprise for Linux software package (McAfeeVSEForLinux‑1.

9.0.<build number>‑release‑full.noarch.tar.gz) on to a temporary directory on the ePolicyOrchestrator server.

2 Go to the temporary directory and extract McAfeeVSEForLinux‑1.9.0.<build number>‑others.tar.gz.

3 Check in the McAfee Agent (MSA‑LNX_4.8.0_Package.ZIP) bundled with this package on to theePolicy Orchestrator Master repository.

4 Check in McAfeeVSEForLinux‑1.9.0.<build number>‑EPO.ZIP on to the ePolicy OrchestratorMaster repository.

5 Check in these extensions on to the ePolicy Orchestrator "Extensions":• EPOAGENTMETA.ZIP

• LYNXSHLD1900.ZIP

• LYNXSHLD1900PARSER.ZIP

• HELP_VSEL_190.ZIP

6 Create and download the agent installation package by performing these steps:

a From System Tree, click System Tree Actions | New Systems. The New Systems page appears.

b Under How to add systems select Create and download agent installation package, click Non‑Windows, then selectMcAfee Agent for Linux 4.8.0 (Current) and click OK.

c From Download file, right‑click install and select Save Target As... to download the file on to your localsystem.

7 From the Linux terminal, execute the following command:

sh install.sh –i

This will establish a connection between ePolicy Orchestrator and the Linux client computer.

8 Create a Product Deployment Task on ePolicy Orchestrator to deploy VirusScan Enterprise for Linuxsoftware on client systems.

For more detailed information on how to integrate and configure VirusScan Enterprise for Linuxusing VirusScan Enterprise for Linux, see the McAfee VirusScan Enterprise for Linux — ConfigurationGuide for your product version.

InstallationIntegrating with ePolicy Orchestrator 3


Removing the softwareUse this task to remove McAfee VirusScan Enterprise for Linux from your computer.

Task1 To uninstall VirusScan Enterprise for Linux, type the following at the command prompt:

rpm ‑e McAfeeVSEForLinux

rpm ‑e MFEcma

rpm ‑e MFErt

If you want to uninstall from a Ubuntu server, type:

dpkg ‑‑purge mcafeevseforlinux

dpkg ‑‑purge mfecma

dpkg ‑‑purge mfert

2 Reboot the computer to remove the VirusScan Enterprise kernel modules.

You do not have to reboot the computer immediately, because the VirusScan Enterprise for Linuxkernel modules does not interrupt functioning of any other running service.

3 InstallationRemoving the software


Index

Aabout 7about this guide 5audience 7

Cconventions and icons used in this guide 5

Ddocumentation

audience for this guide 5product-specific, finding 6typographical conventions and icons 5

Ffeatures

administration 7reporting 7scanning 7

Iintroduction 7

LLinuxshield

previously known as 7

MMcAfee ServicePortal, accessing 6

Pproduct features 7

Rrelease

what's new 8requirements

system 11

SServicePortal, finding product documentation 6system

requirements 11

TTechnical Support, finding product information 6

Wwhat's in this guide 6what's new 8


1.9.0 software mcafee virusscan enterprise for linux · pdf file2 mcafee virusscan enterprise...

Documents