12th annual adam kreuter memorial golf...
TRANSCRIPT
WhenWednesday, June 20, 2007
WhereShadow Pines Golf Club, 600 Whalen Rd, Penfield, NY 14526Phone: 585-385-8550
Time9:30 A. M. sharp (Shot Gun Start)
CostGolf/Dinner: Rochester SPE members - $95 per person Non-members - $125 per personDinner only: $30 per person
To receive the member rate, one person per foursome must be a member of the Rochester Section!
Dinner and Golf must be paid with reservation!Reservations are required and must be accompanied with a check. Cancellations cannot be accepted after Friday, June 8, 2007.
ReservationsMake checks payable to Rochester Section SPE. Mail check and registration form to: Ontario Plastics, Inc., 2503 Dewey Ave., Rochester, NY 14616
Limit of 152 players. Tee gifts limited to 152 players. All players must be at the course by 8:30 AM for position assignment. Coffee will be provided in the morning. Hot or Hamburger & Refreshments at the Turn!
COURSE RULES: NO METAL SPIKES ALLOWED! No Personal coolers allowed. All beverages must be purchased through the clubhouse. Any alcoholic beverages to be consumed on the premises MUST be purchased through our facilities only. Maintain speed of play, max. time allowed is 15 minutes per hole. No spectators or caddies allowed on course. No vendors allowed on premises for promotions or sale. Players must follow proper etiquette on golf course. Proper attire is required, collared shirts and golf shoes or sneakers. No denim, No tank tops or cut-offs allowed. Contests on course must have consent of the Golf Course Director.
12th Annual Adam KreuterMemorial Golf Outing
June 2007 • Volume 28, Issue 4
SPECS NewsRochester Section 20 • Society of Plastics Engineers • Promoting the Scientific and Engineering Knowledge of Plastics
Contents
President’s Messagepage 2
Oct. BOD Minutespage 4
Mar. BOD Minutespage 7
Golf Sponsor Info.page 9
Golf Registrationpage 9
E-Cubed Fairpage 11
Want AdPage 13
Officers and Directorspage 14
Advisors andCommittee Chairs
page 14
SPECS News Staffpage 16
In just a month or so I will be handing the SPE BOD President‛s gavel over to Dario Gonzalez. Dario works for Branson Ultrasonics and in working together with him on the board I‛ve gotten to know Dario as an honest, caring, hard working person; I have the utmost faith that he will carry on as your new President working hard to do his very best for SPE Rochester Section 20.
In reflecting on my serving three years as your President I found myself wondering aloud in the presence of (Director) Brett Blaisdell how the board could have accomplished more and Brett gave me some very good advice: he told me to think instead about what was (accomplished).
What this did was lead me to think about not only all the things that did get done, but more importantly, to realize who it was that really accomplished everything: the selfless and hard working volunteers that served as your Board of Directors over this three year period.
At the risk of forgetting someone I will do my best, by memory, to list them all here now, as well as our Program Chairs and our councilors during this same period in recognition publicly for their work for the section and to thank them for the opportunity to work together with them over these past three years:
• Vice President/President Elect: Dick Mastrodonato and Dario Gonzalez.• Secretary: Jeff Genovese.• Councilor: Sue Daly, Ralph Barnes.• Treasurer: Jim Wenskus.• 1st Past President: Frank Murphy • Director: Carl Letendre, Charlie Catchpole, Dave Porier, Don Jambro, Mike Hayes, John
Bernacki, Jay Westendorf, Fred Buja, Jerry Getgen, Joel Shenton, Bob Russell, Sharad Rajguru, Gary Gray, Brett Blaisdell, Gerard Reynolds, Bruce Buchman, Jim Kolb.
• Newsletter Chair: John Bernacki, Dario Gonzalez.• Education Chair: Fred Buja.• Public Interest Chair: Mike Hayes.• Membership Chair: Dick Mastrodonato, Sharad Rajguru, Gary Gray, Brett Blaisdell.• Awards/Nominations Chair: Fred Buja, Bob Russell, Bruce Buchman, Jim Kolb.• Programs Chair: Dick Mastrodonato, Jeff Genovese.• House and Sponsorships Chair: Ralph Barnes.• Golf Chair: Jay Westendorf.• RES Representative: Bob Slocomb.• Circulation: John Bernacki, Dario Gonzalez.• Photographer: Jerry Getgen, Mike Hayes, Dario Gonzalez.• Councilor; SPE RIT Student Chapter Advisor: Dr. Spencer Kim.
The Unsung Heroes!Mike McDermott, President Rochester Section SPE
President’s Message
2 SPECS News • April 2007
continued on next page
SPECS News • April 2007 3
• Councilor; SPE RIT Student Chapter President: William Crosby, Ryan Conwell• Advisor; SPE International: Tricia McKnight.
I hope I have not forgotten anyone, or misspelled anyone‛s name; my apologies if I have. It was an honor to work together with each and every one of you; you are truly the unsung heroes. With my deepest respect for each and every one of you, on behalf of the membership of SPE Section 20, Thank You!
I would like to recognize Branson Ultrasonics for their very generous donation of one of their excellent Ultrasonic Welder‛s to RIT, via the RIT SPE Student Chapter, for use in a current student project and later for the new Plastics Technology Lab that is now being built. Through Dario Gonzalez‛s involvement with RIT Branson has long shown support for education. Very nice!
I would like to thank Husky for their March dinner meeting presentation on Thix0molding and Conair for their April dinner meeting presentation on “how to hire a robot”. Great job both! □
continued from previous page
Contact: Ron Parrington, P.E.
131 Woodsedge DriveLansing Bus. & Tech. ParkLansing, NY 14882
Phone: 607.533.7000 Fax: 607.533.9210Toll Free: 888.464.8422
www.imrtest.com
A Division of Ithaca Materials Research & Testing, Incorporated
Professional Polymer Testing Services
• Material ID (FTIR)• SEM / EDS• Thermal Analysis (DSC)• Filler / Additive Analysis• Failure Analysis• Reverse Engineering• Flammability• Impact Resistance• State-of-the-art Mechanical Testing in Hot / Cold Environments
SPE Rochester SectionBoard of Directors MeetingPro-Mold (350 Buell Road, Rochester, NY)
10/2/06 Meeting Minutes:
Times/Attendance:
Meeting called to order at 5:30 by Mike McDermott. Also in attendance were Dario Gonzalez, Jeff Genovese, Ralph Barnes, Jim Wenskus, Gerard Reynolds, Gary Gray, Bruce Buchman and Brett Blaisdell and John Bernacki. Meeting was closed at 7:00.
Old Business
1) Minutes: June 2006 minutes were approved via email.
New Business
2) BOD for this year:
• Goals: − Fill open positions: Education, Public
Interest, Golf-Outing co-chair (to be chair for next year).
− Operate this year with a balanced budget.
− Continue public interest event attendance.
− Finish this year in position for next year to be successful.
• Presentation Agenda: needs to be complete by next meeting; December and February filled, no January meeting, February meeting (?), working on March and April.
• BOD Meetings: will be separate to monthly presentations, two weeks prior.
• BOD reporting method: will continue with emailed reports (send to all board members one week prior to next meeting).
3) Fred Buja resigned due to working to start his new business venture; we need to find replacement.
4) Discussion, vote, carried that new members this year will get first dinner meeting they attend free.
Reports:
• International Councilor (Ralph Barnes)− Report was received by email.− Did attend National meeting in September.− Will send information for inclusion in
newsletter.
• Treasurer Report (Jim Wenskus)− Report was received by email.− Budget for year presented and reviewed.− We are set for balanced budget for year (see
balanced budget goal in new business).− Gerard is co-treasurer.
• Newsletter Report (Dario Gonzales)− No report in advance.− Mike owe’s President’s column.− June minutes will be in next newsletter.
• Education− No report received (except resignation).− Replacement needs to be identified.− RIT is not listed at National as official student
chapter: Mike will look into and get corrected.− Budget includes scholarship for this year.
• Awards/Nominations (Jim Kolb & Bruce Buchman)− No report received in advance.− Have not met with Bob Russell yet; will do so by
next meeting to make certain HSM application that Bob filled out end of last year for Dick Mastrodonato gets sent into national on time.
− Looking for any other National Award suggestions.
• Membership (Brett Blaisdell and Gary Gray)− Reports received in advance via Email from
previous chair, Sharad Rajguru.− 212 members this year.− New members will get first dinner free this year
(see new business).− Brett and Gary will assume reporting role
forward for this year.
• Public Interest & Photographer− No report (position open: replacement needed).− Show dates: RMSC in December, RIT in April,
St. John Fisher May; exact dates TBD.− Dario to be photographer; Mike will get camera
to Dario.− Mike will pick-up Public Interest Equipment
from Mike Hayes and store at Advent.
• House & Sponsorships (Ralph Barnes)− No report in advance.− Meeting months to be finalized (reference new
business).• Technical Program (Jeff Genovese)
− No report in advance.− Agenda for year to be finalized by next month
(see new business).− Once all set we need to send to National so they
can publish.
• Publicity (John Bernacki)− No report.
• Golf Outing (Jay Westendorf)− No report received in advance.− This is Jay’s last year: he agreed to do it if he has
Co-Chair to teach/become chair next year.− Board needs to identify co-chair (see new
business).
Respectfully Submitted,Jeff Genovese12-4-06 □
4 SPECS News • April 2007
JB Associates ofRochester, Inc.
Plastics Consultant
Concept to Production Part design, tooling,materials and Processing selection, machinery,
Process and part verification
9 Brakenberry Road, Pittsford, NY 14534Phone/Fax: 585-244-2970; Cell: 585-764-6779
E-mail: [email protected]: 4spe.org/cc/detail.php?id=149
Advent Tool & Mold999 Ridgeway Ave., Rochester, NY 14615
Phone: 585-254-2000Fax: 585-254-3000
www.adventtool.com
Armstrong Mold Corp.6910 Manlius Center Road
E. Syracuse, NY 13057
Phone: 315-437-1517; Telefax: 315-437-9198
Web: www.armstrongmold.comE-mail: [email protected]
SPECS News • April 2007 5
NalgeneLabware •Tubing •Tanks
Professional-quality plastic productsfor scientific laboratories, industrial
applications and consumer use• Injection Molding• Extrusion Molding
• Injection Blow Molding• Rotational Molding
• Extrusion Blow MoldingFor more information contact:
Nalge Nunc International75 Panorama Creek Drive
Rochester, NY14625Tel: 585-586-8800; Fax: 585-586-3294
An Apogentechnologies company
4110 Niles Hill Rd. Wellsville, NY 14895Sales: Dick JohnsonPhone: 716-839-0038Phone: 585-593-3169
6 SPECS News • April 2007
Polymer Resources Ltd.The Leader in Classic Engineering Plastic Compounds
PRL PC PolycarbonatePRL PPX–Modified PPO/PPEPT–PBT Polyester
PRL ABS–ABS
Robert Spano [email protected]: 330-633-9699
Customer Service: 800-243-5176Fax: 330-633-9288
www.polymerresources.com
PRL–PC PolyestersPRL PC/ABS–PC/ABS Blends PRLPRL PEI–PolyetherimidePRL NY–Polyamide
Fast Heat65 Fairmont Drive
Warwick, RI 02818
Phone: 630-833-5400 ext 602Fax: 630-833-2040
www.fastheat.com
San Wal TechnologiesProcess and Power Technologies
Recorders • Weighing Systems • ActuatorsSCADA/HMI Software • PLC Interfaces
Thermocouples/RTDs • Industrial ComputersRepair and Calibration Services
Buffalo: 716-693-7201Rochester: 585-266-8180
www.bsco.com
J.C. Plastics840 Linden Avenue
Rochester, NY 14625
Phone: 585-385-2236
Coloron Plastics Corp.7300 Church Street
Bloomfield, NY 14469
Phone: 585-739-1050Telefax: 585-657-6777
E-mail: [email protected]
SPECS News • April 2007 7
SPE Rochester SectionBoard of Directors MeetingThe Wishing Well (Chili Ave., Rochester, NY)
3/21/07 Meeting Minutes:
Times/Attendance:
Meeting called to order at 5:10 p.m. by Mike McDermott. Also in attendance were Dario Gonzalez, Jeff Genovese, Ralph Barnes, Jim Wenskus, Gerard Reynolds, Gary Gray, Brett Blaisdell and Dick Mastrodonato. Meeting was closed at: 6:00 p.m.
Old Business
1) Motion by Brett, second by Gary and carried to approve minutes for 12/8 and 2/15 (copies in newsletter).
2) Minutes for 10/2/06 still have not yet been submitted: Jeff will send meeting notes to Mike to get done.
New Business
3) Mike- Jim Wenskus and Wife to attend RES dinner Saturday night, 3/24 (tickets: $150 total): motion by Brett, second by Gary, vote carried.
4) Mike- RIT scholarship: $500 sent, Dr. Kim sent criteria to Mike and Dario for review (looked okay) Mike and Dario to assist Dr. Kim with selection.
5) Mike- Resignation: Bruce Buchman (now works in Erie PA): leaves us without an awards/nominations chair: Mike to fill-in for balance of this year but need next year.
6) Mike- Booth volunteer: must have for E-cubed fair at RIT on Thursday 4/26 from 11:00 am to 8:00 pm (we promised to be there) and at Science Exploration Days at St. John Fisher on Wednesday and Thursday May 9 & 10. Mike will send out email via Dick to get “volunteers”.
7) Mike- positions for next year: Officers and Directors nominated and/or elected were as follows:
• Dario Gonzalez: President (elected) and CPR Committee Chair (appointed in ’06-’07 by Mike)
• Vice President: Jeff Genovese (elected)⇒ Secretary: open, no nomination (Mike, as
nominations chair, is asking for everyone’s help on this; we will need to have nomination for next month)!
• Councilor: Ralph Barnes (finishing term: expires ’08)
• Treasurer: Jim Wenskus (elected)• Past President: Mike McDermott (earned!)• Director and assistant Treasurer: Gerard
Reynolds (nominated only: considering Secretary)
• Director: Gary Gray (elected)• Director: Brett Blaisdell (elected)• Director: Dick Mastrodonato (elected)
• Director: Dr. Bob Fried (elected)⇒ Director: open, no nomination (Mike will need
to have nomination for next month)!
8) Mike- Committee Chairs for next year:
• Newsletter/Publicity: Brett Blaisdell• Ciculation: Dick Mastrodonato• Education: Dario Gonzalez• Public Interest & Programs: Jeff Genovese⇒ Photographer: open, Mike to appoint by next
month• Membership: Brett Blaisdell• Awards & Nominations: Gary Gray• House & Sponsorships: Ralph Barnes• Golf Outing: Brad Smith
9) Dario- CPR committee (why’s guys): what’s next; brief discussion regarding attendance at past meeting (Husky) being okay but nothing great, wait and see next meeting (STAR automation). Next CPR meeting at Advent on 4/3 at 5:00; Mike to send invites via email.
10) Mike- Reports: only two (Officer or Committee) reports were received in advance for this meeting (and then the day before; after reminder sent): email reporting tried for the past several years has proven not to work! After brief discussion it was agreed by all to redouble efforts to email as required (to entire BOD at least one week prior to each BOD meeting) and to continue email reports next year.
11) Mike will set-up year end BOD dinner meeting date/place (will check with Jim first regarding budget to make certain we end year with balanced budget per stated goal at start of year).
12) Mike asked everyone to send an email to Jeff/BOD with (3) program ideas for next year.
13) Mike (as awards chair) is looking for nominations for section awards for year end BOD dinner.
Reports:
• International Councilor (Ralph Barnes)− Present: no report received in advance.− Next meeting is Cincinnati on May 4,5,6: will
drive (BOD approved expense).
• Treasurer Report (Jim Wenskus)− Present: report was received in advance:− Rebate down $60/quarter due to drop in
membership.− Balance sheet okay: will finish year with
balanced budget.
• Newsletter Report (Dario Gonzales)− Present: no report received in advance.− March issue on line.
continued on next page
8 SPECS News • April 2007
• Education (Mike McDermott)− Present: no report received in advance.− As above, gave RIT check for scholarship.− RIT broke ground on new plastics center.
• Awards/Nominations (Mike McDermott: see above in new business)− Present: no report received in advance.− Nominations: refer to new business items 7 &
8; we need everyone’s help for a nomination for Secretary!
− Awards: refer to new business item 13.
• Membership (Brett Blaisdell and Gary Gray)− Present: report was received in advance:− As of 2/28 we have 190 members total (3 new, 1
transfer, 5 renewals).− Mike will send welcome emails to new members.
• Public Interest & Photographer (position open: being covered by Mike McDermott & Dario Gonzalez respectively)− Present: no report received in advance.− RES E cubed Fair at RIT is 4/26 (refer to note 6
in new business).− Science Exploration Days at St. John Fisher is
in May: Mike will email details and request for volunteers.
− Need photographer for next year (refer to item 8 in new business).
• House & Sponsorships (Ralph Barnes)− Present: no report received in advance.− 29 signed up in advance for tonight (includes
students and speaker).⇒ Will send out invoices for newsletter ads.− Ralph suggests $25 dinner price for next year.
• Technical Program (Jeff Genovese)− No report received in advance.− Husky tonight, STAR Automation in April.⇒ Jeff will send April meeting notice info to Brett.− Ideas needed for next year (see new business
item 12).
• Publicity (Brett Blaisdell, with distribution by Dick Mastrodonato)− Present: no report received in advance.− Need info for next month (Jeff to send: reference
technical program item 2 above).
• Golf Outing (Jay Westendorf for ‘07, Brad Smith is chair elect for ‘08)− Absent: no report received in advance.− Mike will get in touch with Jay and get update
for next meeting.
Respectfully submitted on 4-16-07,
Mike McDermott □
Polymer Engineered Products23 Moonlanding roadRochester, ny 14624
Phone: 585-426-1811; Fax: 585-426-1444E-mail: [email protected]
Web: www.polymerproductsllc.com
Ontario Plastics2503 Dewey AvenueRochester, NY 14616
Phone: 585-663-2644
www.ontario-plastics.com
Uddelholm4902 Tollview Drive
Rolling Meadows, IL 60008
www.uddelholm.com
Slide ProductsP. O. Box 156
Wheeling, il 60090
www.slideproducts.com
continued from previous page
SPECS News • April 2007 9
June 20th = SPE Golf DayDear SPE Member/Supporter,
It’s been a late Spring – So, we have pushed off this Big day by one week….
Be assured, preparations are underway to assure another GREAT event this year.
But, your continued support is needed (and is very much appreciated).
Please consider: Hole Sponsorship -------------------- $200
Corporate/Individual Donation -- $$/Merchandise/Gift Certificates
This year includes, the SPE provides: • Same beautiful venue – well manicured, challenging (carts included) links• Always Special Commemorative Door Prize for EVERYONE (150 limit)• Golf Prizes – Closest to Pin, Long Drive, Accurate Drive, Team Low Scores• 50/50 Raffle• Door Prizes – Outstanding table of Goodies @ No extra Cost!• FOOD & DRINK – Lots & lots & lots…..• NON-STOP FUN!
Make plans to attend – bring a Customer, bring a friend, bring your boss!!
A bargain at twice the price!
Sincerely,2007 Rochester SPE Golf Outing Committee
Please contributor, please attend, please contact:Ralph Barnes PH: 585-663-2644 E-mail: [email protected] Westendorf PH: 585-229-4821 E-mail: [email protected] Smith PH: 585-453-5653 E-mail: [email protected]
2007 SPE GOLF REGISTRATIONMEMBER?1. Name: _____________________________ PH#: _________________ Y / N Dinner OnlyCompany: ____________________________________________________
2. Name: _____________________________ PH#: _________________ Y / N Dinner OnlyCompany: ____________________________________________________
3. Name: _____________________________ PH#: _________________ Y / N Dinner OnlyCompany: ____________________________________________________
4. Name: _____________________________ PH#: _________________ Y / N Dinner OnlyCompany: ____________________________________________________
GOLF TOTAL AMOUNT: $__________________ DONATION: $__________________(THANK YOU!)
For further information: Jay Westendorf 585-229-4821, Jim Carlin 585-424-4070 or Ralph Barnes 585-663-2644Checks should be made payable to: Rochester Section, SPE
10 SPECS News • April 2007
SPECS News • April 2007 11
E-Cubed Fair4/26/07
The RES E cubed Fair was held during both the day and night of 4-26-07 in the Clark Gymnasium at RIT. This fair is an opportunity for area school age children as well as the general public to learn more about opportunities in various engineering fields. SPE attended on behalf of the local plastics industry with a table top plastics display and talks by Jim Wenskus and also live demos with our table top molding machine helping attendees make their own screw drivers or decorative stars.
I would like to recognize the following volunteers: Jim Wenskus, Jeff Genovese, Karl Keppler, Bob Murray, Brett Blaisdell,
Brad Smith, Scott Hall, Andrew Christie, Barb McDermott, Jim Kolb and his son Nick and also Ryan Conwell and Luke Brown of the RIT SPE student chapter who stopped by to pitch in.
Thanks much everyone... Mike McDermott □
Injection MoldingSolutions By HuskyKeeping Our Customers in the Lead
We founded Husky in 1953 with a passion to find innovative ways of keeping our customers in the lead. We started by building molds, and found they outmatched the machines of the day. So, we built our own. Soon, we added robots, began integrating complete molding cells and even designed total factories -- all to give our customers an edge. Then, in response to customer needs, we developed high speed thinwall systems and high volume PET preform systems and they began to sell around the world. We followed with a global service and support network to ensure our customers stayed out in front. More recently, we broadened our product line, launched a variety of value-added services, refined our manufacturing processes, and further strengthened our service and sales team. While much has changed over the years, one thing never has -- our commitment to keeping our customers in the lead.
The words may be new, but the mindset goes as far back as we do. Now, it is our promise. It is the filter through which our decisions are made, the spark that ignites our engineering teams, the yardstick for our service and sales team, the foundation upon which our manufacturing processes are built, and the roadmap that guides our future success -- together.
Carmen Lowe at www.husky.ca/en/locator/toronto.htmlRegional Manager, Toronto
Phone +1 (905) 951-5000, ext. 5118Fax +1 (905) 951-5337
www.husky.ca
12 SPECS News • April 2007
SPECS News • April 2007 13
Looking for a position in the Rochester area
I obtained your contact information from the website of the Society of Plastic Engineer Rochester section. I am contacting you because I am currently in search for a job in a company that can use my skills as a Polymer Engineer. Like many other organizations my company, ExxonMobil Chemicals Films Business, has experienced reorganization and, as a result, my job was eliminated last February 14, 2006. I would like to find a research and development position with a stable company located in the Northeastern area (NY, NJ, PA, Philadelphia, CT, etc). Due to personal reason, I am restricted in term of location I can work. While I don’t expect that you will be able to provide me a job, I would appreciate hearing your suggestions, and any assistance you can provide.
Perhaps you may be aware of such an opportunity with a chemical company in Rochester or in the North East area. I am also trying to identify situations where mergers, acquisitions, and company expansion plans may create such an opportunity. If you can provide some assistance in that area, I will also appreciate it.
My qualifications include:
* A Ph. D. degree in Polymer engineering.
* A Master and a Bachelor degree in Chemical Engineering.
* 12 years of experience with a government research laboratory and 3 years of experience with the film business at ExxonMobil.
* Broad knowledge of polymer characterization, polymer blend and polymeric materials.
A copy of my resume can be provided upon request. You can reach me at (585) 727- 4626 or by e-mail. Thank you for your time and your help.
Sincerely,
Geralda Severe
2006– 2007Officers and directors
PresidentMike McDermott 585-254-2000, [email protected]
Vice President, President ElectDario Gonzalez 585-624-8000 [email protected]
SecretaryJeff Genovese 585-464-8050 [email protected]
TreasurerJim Wenskus [email protected]
International SPE CouncilorRalph Barnes [email protected]
Director (expires 2007)Gerard Reynolds [email protected]
Director (expires 2007)Jim Kolb [email protected]
Director (expires 2007)Gary Gray [email protected]
Director (expires 2007)Bruce Buchman 585-223-7770, [email protected]
Director (expires 2007)Brett Blaisdell [email protected]
2006 – 2007Advisors andCommittee Chairs
Advisors (non-voting)
Past PresidentFrank Murphy [email protected]
RIT Student Chapter RepresentativeRyan Conwell (Chapter Pres.)[email protected]
Committee Chairs (non-voting)
Newsletter ChairDario Gonzalez 585-624-8000 [email protected]
Education ChairMike McDermott 585-254-2000, [email protected]
Awards/Nominations Co-ChairsJim Kolb [email protected] Buchman 585-223-7770, [email protected]
Membership Co-ChairsBrett Blaisdell [email protected] Gray [email protected]
House/SponsorshipsRalph Barnes [email protected]
ProgramsJeff Genovese 585-464-8050 [email protected]
Golf OutingJay Westendorf [email protected]
Publicity ChairJohn Bernacki [email protected]
Circulation ChairDick Mastrodonato [email protected]
Austro Mold Inc.
Designers and builders of plastic Moldsand die cast dies
Custom injection moldersElectro mechanical assemblies
3 Rutter street, Rochester, NY 14606 Phone: 585-458-1410
Fax: 585-458-0963
14 SPECS News • April 2007
16 SPECS News • April 2007
SPECS News staff
EditorDario [email protected]
CirculationDick [email protected]
PhotographyMike [email protected]
SponsorsRalph [email protected]
Web ContentMelissa [email protected]