#127625 2018 designs sie inches sie mm stitch count sie inches sie mm stitch count n 1. single color...

1It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.

Electronic designs are licensed to the original purchaser for use at one location. ©2018 OESD, LLC. All rights reserved.

1DESIGN

#12762

Freestanding Mrs. Claus



DESIGNSNote: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity

when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.

Size Inches: Size mm: Stitch Count:


n 1. Placement Stitch ............................................ 2101n 2. Cut Line and Tackdown .................................. 2101n 3. Outer Cover Stitch .......................................... 2101n 4. White Robe Detail .......................................... 0015n 5. Inner Robe Design Work ................................ 1912n 6. Inner Cover Stitch ........................................... 2101

3.39 X 7.12 in.

12762-01 Mrs. Claus Dress Slice 1 FSA

86.11 X 180.85 mm3.39 X 7.12 in. 31,226 St.


86.11 X 180.85 mm 34,600 St.









3.39 X 7.12 in.


86.11 X 180.85 mm3.39 X 7.12 in. 34,570 St.


86.11 X 180.85 mm 35,519 St.








n 1. Placement Stitch ............................................ 0015n 2. Cut Line and Tackdown .................................. 0015n 3. Design Work and Cover Stitch ....................... 0015

3.40 X 6.19 in.

12762-05 Mrs. Claus Apron FSA

71.12 X 137.41 mm2.80 X 5.41 in. 24,182 St.

12762-06 Mrs. Claus Arms FSA

86.36 X 157.23 mm 22,748 St.

n 1. Placement Stitch ............................................ 1912n 2. Cut Line and Tackdown .................................. 1912n 3. Inner Sleeve Design Work .............................. 1912n 4. Sleeve Cover Stitch ........................................ 2101n 5. Gloves and Sleeve Trim ................................. 0015







n 1. Single Color Design ........................................ 0015

1.92 X 4.05 in.

12762-07 Mrs. Claus Apron Bow FSL

70.36 X 59.44 mm2.77 X 2.34 in. 10,948 St.

12762-08 Mrs. Claus Face FSA

48.77 X 102.87 mm 7,494 St.

n 1. Placement Stitch ............................................ 1060n 2. Cut Line and Tackdown .................................. 1060n 3. Tab and Face Cover Stitch ............................. 1060n 4. Hair ................................................................. 0015n 5. Cheeks ........................................................... 2155n 6. Eyes and Mouth ............................................. 4174n 7. Nose ............................................................... 1430n 8. Lenses ............................................................ 0015n 9. Frames ........................................................... 0145







n 1. Placement Stitch ............................................ 1060n 2. Cut Line and Tackdown .................................. 1060n 3. Tab and Face Cover Stitch ............................. 1060n 4. Hair ................................................................. 0015

1.92 X 4.06 in.

12762-09 Mrs. Claus Hair & Face 1 FSA

48.77 X 103.63 mm1.92 X 4.08 in. 9,079 St.

12762-10 Mrs. Claus Hair & Face 2 FSA

48.77 X 103.12 mm 9,053 St.

n 1. Placement Stitch ............................................ 1060n 2. Cut Line and Tackdown .................................. 1060n 3. Tab and Face Cover Stitch ............................. 1060n 4. Hair ................................................................. 0015








4.15 X 3.91 in.

12762-11 Mrs. Claus Hair FSL

48.77 X 103.63 mm1.92 X 4.08 in. 9,789 St.

12762-12 Mrs. Claus Dress Collar FSL

105.41 X 99.31 mm 17,537 St.







n 1. Placement Stitch ............................................ 0015n 2. Cut Line and Tackdown .................................. 0015n 3. White Detail and Cover Stitch ........................ 0015

12762-13 Mrs. Claus Foundation FSA

141.48 X 148.59 mm5.57 X 5.85 in. 17,748 St.



MATERIALS

Isacord Thread Colors0015 White 0145 Skylight 1060 Shrimp Pink 1430 Melon 1912 Winterberry 2101 Country Red 2155 Pink Tulip 4174 Charcoal

Stabilizer

• Embroidery thread• Fabric for applique• Embroidery machine• Optional -

• alligator clamps, tweezers, hemostats, stiletto or a tiny crochet hook• Expert Embroidery Tape TearAway

• Aquamesh WashAway• StabilStick TearAway

Supplies



Requires 1 Mrs. Claus Dress Slice 1 FSA - 12762-01Requires 1 Mrs. Claus Dress Slice 2 FSA - 12762-02Requires 1 Mrs. Claus Dress Slice 3 FSA - 12762-03Requires 3 Mrs. Claus Dress Slice 4 FSA - 12762-04Requires 1 Mrs. Claus Apron FSA - 12762-05Requires 1 Mrs. Claus Arms FSA - 12762-06Requires 1 Mrs. Claus Apron Bow FSL - 12762-07Requires 1 Mrs. Claus Face FSA - 12762-08Requires 1 Mrs. Claus Hair & Face 1 FSA - 12762-09Requires 1 Mrs. Claus Hair & Face 2 FSA - 12762-10Requires 3 Mrs. Claus Hair FSL - 12762-11Requires 1 Mrs. Claus Dress Collar FSL - 12762-12Requires 1 Mrs. Claus Foundation FSA - 12762-13

Thread:0015 - 2 spools1912 - 1 spool2101 - 1 spool

Fabric: White (base) - 6” x 7”White (apron) - 5” x 2 ½”Red (body) - 1/8 ydCream (head) - 7 ½” x 6” piece

Final Height: 9”

SUMMARY

Freestanding Mrs. Claus



STEP 3• Place fabric over placement stitch and make

sure to cover stitches completely.• Stitch cut line and tackdown.• Optional - use TearAway tape to hold items

in place.

STEP 2• Hoop two sheets of Aquamesh.• Sew placement stitch.

STEP 1• Prep fabric by applying 2 sheets of

StabilStick TearAway to the wrong side of the fabric.

• Note - this stabilizes your fabric so it isn’t too limp and produces a nice, crisp project.

EMBROIDERY



STEP 6• Remove from hoop, trim Aquamesh ¼”-½”

away from fabric, be careful NOT to cut your eyelets or buttonettes!

• Wash away stabilizer and let dry.• Note - for instructions and tips, see last

page.

STEP 5• Stitch inner design work.• Stitch inner cover stitch.

STEP 4• Remove tape, carefully.• Remove hoop from machine, DO NOT

unhoop fabric/stabilizer.• Trim along cut line.• Stitch lace and outer cover stitch.• Repeat placement and cut line steps for the

remaining appliques.

EMBROIDERY



STEP 3• Align and attach front half to back half using buttonettes

and insert bow into center slice on back half as pictured.

STEP 2• To start assembly of the body, align and

attach slices as pictured for the front and back halves.

STEP 1• Attach each head section starting with the

top 2 buttonettes (place buttonettes inward) working your way around and connecting the remaining buttonettes at the base of the head.

• Note - buttonettes are inward for a rounded head

ASSEMBLY



STEP 6• Repeat in reverse on the other side.

Cuff buttonette and then top shoulder buttonette.

STEP 5• Attach arms by inserting the shoulder

buttonette into its corresponding eyelet. • Then insert the buttonette on the cuff into

the front slice.

STEP 4• WIth the front facing towards you, insert

apron buttonettes into corresponding eyelets as shown.

ASSEMBLY



STEP 9• Attach foundation to body by pulling

the foundation buttonettes through the remaining lower body eyelets.

STEP 8• Wrap the collar around the neck, placing the

buttonette and loop to the back and fasten.

STEP 7• To attach head to the body, face body and head forward, align tabs and slits. Pull tabs

through slits by way of the open base.

ASSEMBLY



INSTRUCTIONS

Supplies:Embroidery Thread:• Use the same embroidery thread in the bobbin as the needle.

Needles:• Use an Organ 80/12 Titanium needle for extended needle life.

Stabilizer:• Use OESD AquaMesh stabilizer.

Handy Hints:For Stiffer Lace:• DO NOT rinse away all of the stabilizer for a “stiffer” lace.

Note that the thread may appear a shade darker if stabilizer is not removed completely.

• If you happen to wash too much out, easily re-stiffen by diluting some stabilizer scraps in water and dipping the item in the solution.

For Very Soft Lace:• Cut away excess stabilizer. Remove remaining stabilizer by

rinsing under warm running water until all traces of the stabilizer are gone. NOTE: If lace should become too limp to work with, dissolve stabilizer scraps in warm water and apply to the lace.

Drying Lace:• The lace looks best when left to dry completely. Lay lace

piece with right side down to dry. This will minimize the tendency for the lace to curl. Be sure to flatten the piece out entirely and allow ample time to dry.

General Freestanding Lace Guidelines

Diagram 1

Eyelet

Buttonette

General Instructions1. Hoop two layers of OESD AquaMesh Stabilizer.2. Attach the hoop to the machine and select the design of your

choice.3. Stitch the design.4. Remove the hoop from the machine and the design from the

hoop. Trim excess stabilizer from the design.5. Rinse away remaining stabilizer and allow it to dry.

Handy Hints:For 3D Lace Projects:• If item becomes too limp to work with, iron the lace pieces

on the wrong side while applying spray starch. After ironing, spray again with starch and allow to dry completely. This will stiffen the lace pieces nicely and aid in construction.

• A pair of tweezers, hemostats, stiletto or a tiny crochet hook can be extremely helpful when inserting the buttonettes into the eyelets. (Please see Diagram 1 for explanation of “buttonette” and “eyelet”.)

• Insert the tip of the alligator clamps, tweezers, hemostats or crochet hook into the eyelet, grasp the buttonette and pull through the eyelet. Or a stiletto could be used to push the buttonette through the eyelet.

#127625 2018 designs sie inches sie mm stitch count sie inches sie mm stitch count n 1. single color...

Documents