120210 bmt din ca - superlok-china.comsuperlok-china.com/pdf/3. tube fittings for din2353.pdf ·...
TRANSCRIPT
Bite Type Tube Fitting for DIN 23532
Before Tightening the nut
After Tigthning the nutE
A B C D
Introduction
SUPERLOK DIN Type Tube Fitting
The SUPERLOK DIN type fitting is a flareless metric fitting
that consists of a body, a compression ring (ferrule) and a
nut, On assembly, two cutting edges of the compression
ring “ bite” into the outer surface of the tube ensuring the
necessary holding power for high pressure.
Available in three series, the The SUPERLOK DIN type
fittings and accessories are manufactured in accordance
with DIN2353.
The fittings and components listed in this catalog are
intended solely for the assembly of connections for fluid
applications.
Design and Construction
The three components of SUPERLOK DIN Type Tube
Fittings are designed and manufactured to produced a
strong, reliable, leak-free joint upon proper assembly.
The SUPERLOK DIN Type Body :
SUPERLOK DIN Type fitting bodies are available in over
thirty configurations. The shaped products (i. e., elbows,
tees, crosses) are forged, then machined to the stringent
SUPERLOK fitting specifications.
The forging process used by “ BMT ” further improves the
strength and mechanical properties of the fitting material.
Straight products are made from cold drawm bar stock. The
cold drawning operation ensures consistently t ight
dimensional tolerances, as well as significantly improved
strength.
The SUPERLOK DIN Type compression Ring :
SUPERLOK compression rings are precision machined with
all dimensions and surfaces, particularly the critical bite
edges, monitored on an ongoing basis, The rings are then
heat treated in a manner that provides the hardness,
strength, and toughness necessary to satisfy the
demanding service conditions that exist in industry today.
The SUPERLOK DIN Type Nut :
SUPERLOK fitting nuts are either cold formed, machined
from cold drawn material. The cold forming and cold
drawing operations provide a more tightly packed grain
structure, thus improving the material’s strength, in addition,
cold forming significantly improves the fatigue properties or
endurance limits of the nuts.
Function of DIN TypeTube Fittings
The SUPERLOK DIN Type fitting produces a low to high
pressure, leak free connection of tubes and components in
fluid systems. The basic function of the compression Ring
is the controlled compression bite of the ring into the tube
due to a unique internal geometry.
The front cutting edge (A) has already started cutting into
the tube before the second cutting edge (B) starts. As soon
as both cutting edges have cut the tube to the designed
depth further advance is limited by the stop edge (C).
Owing to the design of both cutting edges and stop edge all
forces arising are equally distributed. This distribution along
with the specially designed interior collar (D) of the ring
gurantees increased safety, particularly with regard to
vibration and flexure stresses. The design and function of
the compression ring ensure that service vibration loading is
not present in the areas of the tubing where the bite is
made.
The stop edge causes a sharp increase in tightening forces
which is clearly perceptible. After assembly, a visible collar
(E) of cut tube material must completely fill the space in
front of the first cutting edge. With stainless steel tube
and hose connection made from free cutting steel, the collar
is less due to the harder material.
During assembly, it is absolutely essential that the tube is
held firmly against the stop in the inner cone of the fitting;
if not, the cutting process will not take place satisfactorily.
Reassembly can be performed an unlimited number
of times
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 3
Standard Material Specifications
Material specification
Pressure and Temperature Load Capability
Working pressure
Permissible operating temperature range - For fitting materials
- For sealing materials
Pressure Reductions
Recommended pressure reductions ( determined by the fuid
medium) for higher service temperature
* For different material of tubes and fitting.
The tubes must be tested separately concerning the allowed
temperature range and the necessary reduction of pressure.
GasketsThe gaskets used on valves and fittings are normally manufactured
in NBR. All have a working temperature of -35° to +135° C with a
hardness of 85 5 shores. For higher temperatures Viton seals are
suggested with working temperatures between -25° to 200° C with a
hardness of 80 5 shores. All the items that are assembled with
gaskets or seals of any kind must be handled according to the
Din 7716 norm. (requisites for the stocking of rubber product)
Seal on thread endsTo obtain the maximum performance, the taper male thread is to be
matched with the taper female thread. The cylindrical male thread is
to be matched with the cylindrical female thread. It is possible to match
a taper male thread with a cylindrical female thread, but this
combination is technically valid only in pipings where medium / low
performances are required and is never to be used where high
pressures are applied.
In case of matching of a cylindrical thread with relatively soft material,
it is advisable to use plain gasket type of seal.
Material of Fittings
316 Stainless steel
Carbon Steel
Brass
- 60 up to + 400 (DIN17440)
- 40 up to + 120 (DIN 3859)
- 60 up to + 175
Temperature Ratings
* The specification in the pressure reductions section are
to be observed here.
Material of Fittings
316 Stainless steel
Carbon steel
Brass
Temperature Rating Reduction of Pressure
- 60 up to + 20
+ 50
+ 100
+ 200
+ 300
+ 400
- 40 up to + 120
- 60 up to + 175
-
4%
11%
20%
29%
33%
-
30%
Seal Material
NBR
FPM
PTFE
- 35 up to + 100
- 25 up to + 200
- 60 up to + 240
Temperature Ratings
* ED - Ring and O - Ring of NBR Standard
* Working pressure - The nominal pressure (PN) as referred to
in DIN2401, part 1 draft
4 - 8
6 - 18
-
22 - 42
6 - 14
16 - 30
38
100
315
-
160
630
400
315
4 - 8
6 - 15
18 - 22
28 - 42
6 - 14
16 - 25
30 - 38
100
250
160
100
630
400
315
LL (Very light)
L (Light)
S (Heavy)
Series Steel (DIN3859) SS316 (DIN 17440)
Pressure Ratings
Size Pressure (bar) Size Pressure (bar)
CAUTIONWhen combining the different fitting and sealing materials
the lowest temperature limit in each case is applicable
Fitting
Materials
Carbon Steel
Brass
Stainless Steel
Materials according to DIN 3859
Materials according to DIN 17660 /DIN 17672
Materials according to DIN 17440 (Material No. : 1.4571 & 1.4401)
Bite Type Tube Fitting for DIN 23534
Tubing guide
Allowed Carbon Steel Tubes on All Series
- For steel tubes in mild carbon steel we advise to use calibrated seamless cold drawn without welding tubes ST 37.4 as
per DIN 1630.
- Maximum allowed hardness on the outside diameter of the tube is 75 HRB.
- The indicated pressure are to be intended at a constant pressure rate and with temperatures between -20°and +120°.
Tube which need a support sleeve for assembly in SUPERLOK DIN Type Tube Fittings.
Tube
O.D
(mm)
Tolerance
(mm)
Wall
Thickness
(mm)
Tube
I.D
(mm)
DesignPressure(bar)
DesignPressure(bar)
DIN2413
Static
DIN2413
Dynamic
Weight
(kg/m)
4
5
6
8
10
12
14
15
16
18
20
22
25
28
30
35
38
42
0.1
0.1
0.1
0.1
0.1
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.15
0.15
0.2
0.50.751.01.00.751.01.52.02.251.01.52.02.51.01.52.02.53.01.0
1.52.02.53.03.5
11.52.02.53.03.541.0
1.52.02.53.01.0
1.52.02.53.01.0
1.52.02.53.0
1.52.02.53.03.54.015.2.02.53.02.02.53.04.04.55.01.52.02.53.04.05.02.0
2.53.04.05.02.02.53.04.05.06.02.5
3.04.05.06.07.02.0
3.04.0
32.523
4.543256543876541098765121110987613121110914131211101615141312
171615141312191817162120191716152524232220182625242220313029272523333230282624282634
3134.9522432333389549692757333431549658235373478576666235353409495576651201302403434507576576188282336409478176264353386452157235313348409
212282353373426478192256320343226282338394437478151201252302357434188235282336409161201242322357419186223297332390446134203269
274391502416289372526662725288412526630209357458551638209303391474551624182625343417487553553171248321391458160234303370433143209273333391
191249303357408458174227278328201248292378418458139181223264342415171210248321391147181215280342401168200260318373427124181237
0.0470.0600.0740.0990.1030.1230.1660.1970.2080.1730.2400.2960.3390.2710.3140.3950.4620.5180.2710.3890.4930.5860.6060.7340.3210.4620.5920.7090.8140.9060.9860.3450.4990.6410.7710.8880.3700.5360.6910.8320.9620.4190.6100.7890.9561.110
0.6840.8881.0801.2601.4241.5780.7580.9861.2021.4061.1341.3871.6282.0722.2752.4660.9801.2821.5721.8502.3682.8361.3811.6952.0002.5703.0801.6302.0002.3703.0603.6904.2902.1892.5893.3504.0754.7405.3501.9732.8903.750
Tube
O.D
(mm)
Tolerance
(mm)
Wall
Thickness
(mm)
Tube
I.D
(mm)DIN2413
Static
DIN2413
Dynamic
Weight
(kg/m)
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 5
4
6
8
10
12
14
15
16
18
18
20
22
25
28
30
35
38
42
0.1
0.1
0.1
0.1
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.15
0.15
0.2
2.02.53.0
2.02.53.03.54.0
Tubing guide
Allowed Stainless Steel Tubes on All Series
- For steel tubes in stainless steel we advise to use calibrated seamless cold drawn without welding tubes 1.4571 as per DIN
17458 or ASTM A269.
- Maximum allowed hardness on the outside diameter of the tube is 85 HRB.
- The indicated pressure are to be intended a constant pressure rate and with temperatures between -60° and +200°.
Tube O.D
(mm)
Tolerance
(mm)
Wall
Thickness
(t mm)
Weight
(kg/m)
Design Pressure
DIN 2413-1
Tube
O.D
(mm)
Tolerance
(mm)
Wall
Thickness
(t mm)
Weight
(kg/m)
DesignPressure(bar)
DIN 2413-1(bar)
* Tube which need a support sleeve for assembly in SUPERLOK DIN Type Tube Fittings.
** Tubes to be used for ISO 8434-2 / SAE J514 norm only.
0.51.01.01.52.01.01.52.02.51.01.52.02.53.01.0
1.52.02.53.03.51.52.02.53.03.51.52.03.0
1.52.02.53.01.5
0.0480.0760.1250.1690.2000.2250.2440.3010.3440.2250.3190.4010.4690.5260.2750.3940.5000.5950.6760.7450.4690.6010.7200.8260.9200.5070.6510.9020.5440.7020.8450.9770.619
326544406572721347449572686294389498601694245368426516601679315420452529601294392498275368402471245
0.8010.9711.1280.9021.0951.2771.4461.6021.0011.2201.4271.1511.4081.6532.1042.3101.3011.5961.8781.4021.7212.0282.6042.2222.0342.4033.1042.6283.4054.1312.9293.806
326409426294368389444498267334401236294352411456210263315175245294392168210252336232310387210280
Bite Type Tube Fitting for DIN 23536
Stud Ends & Tapered Hold Forms for Tube Fittings
Form of Stud Ends
M8 1.0
M10 1.0
M12 1.5
M14 1.5
M16 1.5
M18 1.5
M20 1.5
M22 1.5
M26 1.5
M27 2.0
M33 2.0
M42 2.0
M48 2.0
-
14.0
17.0
19.0
21.0
23.0
25.0
27.0
31.0
32.0
39.0
49.0
55.0
-
13.9
16.9
18.9
21.9
23.9
25.9
26.9
31.9
31.9
39.9
49.9
54.9
10.9
12.9
16.9
18.9
20.9
22.9
24.9
26.9
30.9
31.9
37.9
47.9
54.9
Form A (DIN3852 Part 1&2) with sealing by washer
a1 a2 a3 - 0.20
a4 0.1
Thread size for Form A, B, E, F Stud Ends
Detail X
Form B (DIN 3852 Part 1&2) with sealing by
compression against face of body.
Form E (DIN 3852 Part 11) with sealing by
DIN 3869 ring seals (*ED-Ring)
Form F (DIN 3852 Part 3) with sealing by *O-Ring
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G 1
G 1 1/4
G 1 1/2
14.0
18.0
22.0
26.0
32.0
39.0
49.0
55.0
13.9
18.9
21.9
26.9
31.9
39.9
49.9
54.9
-
-
-
-
-
-
-
-
M8 1.0 keg.
M10 1.0 keg.
M12 1.5keg.
M14 1.5 keg.
M16 1.5 keg.
M18 1.5 keg.
M20 1.5 keg.
M22 1.5 keg.
1/8 NPT
1/4 NPT
3/8 NPT
1/2 NPT
3/4 NPT
1 NPT
1 1/4 NPT
1 1/2 NPT
R 1/8 keg.
R 1/4 keg.
R 3/8 keg.
R 1/2 keg.
R 3/4 keg
R 1 keg.
R 1 1/4 keg.
R 1 1/2 keg.
a5
Thread size for Form C Stud Ends
Form C (DIN 3852 Part 1&2) with sealing in tapered thread
Metric (keg) DIN 158
B.S.P (keg) DIN 2999
NPT (keg) ANSI/ASME
B1.20.1-1983
7/16-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNF
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
-
-
-
-
-
-
-
-
-
-
-
-
-
-
14.4
17.6
22.3
25.5
31.9
38.2
47.4
* ED-Ring & O-Ring Seals made of NBR Standard (-20 to 100 )
Other Sealing Materials are available on Request.
a5
a2
a1
Detail Ya2
a1
Cutting Face
Detail Ya3
a1
ED-Ring
Detail Xa1
a4
O-Ring
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 7
Stud Ends & Tapered Hold Forms for Tube Fitting
From of Tapped Holes
Form X (DIN 3852 Part 1&2)
for parallel Stud Ends. (from A,B)
* a7 is Stud Ends Form E
Form W (DIN 3852 Part 3)
for Stud Ends with O-Ring. (Form F)
Form Z (DIN 3852 Part 1&2)
for tapered thread Stud Ends.
12.0
12.0
12.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
-
-
-
-
-
-
-
-
12.0
12.0
15.0
15.0
15.0
15.0
15.0
-
5.5
5.5
8.5
8.5
8.5
8.5
10.5
10.5
-
-
-
-
-
6.9
10.0
10.3
13.6
14.1
16.8
17.3
17.3
5.5
8.5
8.5
10.5
13.0
16.0
17.0
17.0
10.0
10.0
11.5
11.5
13.0
14.5
15.0
15.5
16.0
19.0
19.0
19.5
22.0
-
-
-
-
-
-
-
-
11.5
12.7
14.3
16.7
19.0
19.0
19.0
-
-
8.0
12.0
12.0
12.0
12.0
14.0
14.0
16.0
16.0
18.0
20.0
22.0
8.0
12.0
12.0
14.0
16.0
18.0
20.0
22.0
-
-
-
-
-
-
-
-
1.6
1.6
2.4
2.4
2.4
2.4
2.4
2.4
3.1
3.1
3.1
3.1
3.1
-
-
-
-
-
-
-
-
2.4
2.5
2.5
2.5
3.3
3.3
3.3
-
1.0
1.0
1.5
1.5
1.5
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
1.0
1.5
2.0
2.5
2.5
2.5
2.5
2.5
1.6
1.6
2.4
2.4
2.4
3.2
3.2
-
-
15.0
18.0
20.0
23.0
25.0
27.0
28.0
33.0
33.0
41.0
51.0
56.0
15.0
20.0
23.0
28.0
33.0
41.0
51.0
56.0
-
-
-
-
-
-
-
-
13.0
15.0
18.0
20.0
22.0
24.0
26.0
28.0
32.0
33.0
40.0
50.0
56.0
15.0
19.0
23.0
27.0
33.0
40.0
50.0
56.0
21.0
25.0
30.0
34.0
41.0
49.0
58.0
-
M8 1.0
M10 1.0
M12 1.5
M14 1.5
M16 1.5
M18 1.5
M20 1.5
M22 1.5
M26 1.5
M27 2.0
M33 2.0
M42 2.0
M48 2.0
G 1/8
G 1/4
G 3/8
G 1/2
G 3/4
G 1
G 1 1/4
G 1 1/2
7/16-20UNF
9/16-18UNF
3/4-16UNF
7/8-14UNF
1 1/16-12UN
1 5/16-12UN
1 5/8-12UN
M8 1.0 keg.
M10 1.0 keg.
M12 1.5 keg.
M14 1.5 keg.
M16 1.5 keg.
M18 1.5 keg.
M20 1.5 keg.
M22 1.5 keg.
-
-
-
-
-
1/8 NPT
1/4 NPT
3/8 NPT
1/2 NPT
3/4 NPT
1 NPT
1 1/4 NPT
1 1/2 NPT
R 1/8 keg.
R 1/4 keg.
R 3/8 keg.
R 1/2 keg.
R 3/4 keg.
R 1keg.
R 1 1/4 keg.
R 1 1/2 keg.
a6
min.
Thread size for
Form X,WTapped Holes
a1
Form ZTapped Holes
a2
a7b1
max.a2 0
C1
min.
C2
min.
C3
min.1
+0.4
Bite Type Tube Fitting for DIN 23538
The use of pre-assembly bodies
or pre-assembly tools are strongly
recommended for all assemblies.
Stainless steel tube and fittings
as well as standpipe hose ends
must be pre-assembled in
a pre-assembly tool.
L
6 8 10 12 15 18 22 28 35 42
31 31 33 33 36 38 41 41 48 48
39 39 42 42 45 48 53 53 60 60
LL
4 5 6 8
24 25 25 26
30 32 32 33
Seriestube o.d
H min
min
S
6 8 10 12 14 16 20 25 30 38
35 35 37 37 43 43 50 54 58 65
44 44 47 47 54 54 63 68 73 82
Assembly in fitting body
Saw off tube squareangle tolerance to the tube axis.
2
Lightly de - burr inside and outside edge.Bevel up to 0.3mm 45 (0.012 45 )permissible.
4
Maximum height H for straight tube end Minimum length L for short piece of tube
Lubricate thread and cone of fitting body, also compression ring and thread of nut.
5
B) Preparing fittings parts with lubricants
The portion of straight tube H must not deviate from roundness and straightness to theextent that the tube tolerances in DIN 2391 are exceeded.
1
A) Preparing the tube
3
b) sawed off tube: very little burr
Attention : Do not use tube cutter!
a) tube cut with tube cutter :heavy burr / bevel cut
H
4
Loosen nut. Remove tube from fitting andcheck if a visible collar fills space in frontof 1st cutting edge completely. If not,tighten slightly more. If dose not matterif ring can be roated on tube end.
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 9
Assembly in fitting body
Slip nut and compression ring over tube end.
6
Ensure compression ring and nut arefacing the right way.
7 8
C) Components D) Assembly
9 10 11
E) Check
Final assembly of all pre-assembled fittings (DSE, DSBT, DSRT, DSRA) made in the appropriate body (well lubricated) with at least 1/4 turn of the nut beyond the point of a clearly perceptible resistance.
12 13After dismantling the tube ends for
inspection they should be refitted into
the same inner cone of the fitting body
in which assembly was carried out.
F) Final assembly G) Repeated assembly
WARNINGWe warn against using sealing heads,
form A, DIN 3868.
We recommend the use of swivel nuts,
from B in conformance with DIN 3865.
correct
incorrect
To measure the prescribed turns of thenut, mark nut and tube.
Tighten nut 1-1/2 turns (Tube must not turn with nut). Stop edgs limits over tightening by increasing tightening torque.
Screw nut manually on to fitting body untilfingertight. Hold tube against the shoulderin the cone of fitting body.
On remaking joints, nut to be tightenedwithout increased effort. Fitting body tobe held tight.
Bite Type Tube Fitting for DIN 235310
In tees and crosses shown below port2 is referred to as runand port3, port4 is referred to as branch
: SUPERLOK Bite Type Tube Fitting
: Name of Fitting :Refer to Index
: Tube O.D
4mm 6mm 8mm 10mm 12mm 15mm 16mm 18mm 20mm 22mm 25mm 28mm 30mm 35mm 38mm 42mm
4 6 8 10 12 15 16 18 20 22 25 28 30 35 38 42
Tube O.D
Identify
Ordering Information
Thread Specifications
D CM - 10 L - 02G ED - SS
Example 1 Male Connector
D RUT - 10 L - 10 L - 08 L - B
Example 2 Reducing Union Tee
* Port1 * port2 * port3
Port1
Port3
Port2
Port1
Port3
Port4
Port2
: Series
Series
Identify
Very Light
LL
Light
L
Heavy
S
Pipe Thread
Thread TypeThread Size
1/8”
01N
01G
01R
NPT
ISO/BSP Parallel
ISO/BSP Tapered
ANSI/ASME B1.20.1
ISO228 (DIN259)
DIN - 2999
1/4”
02N
02G
02R
3/8”
03N
03G
03R
1/2”
04N
04G
04R
3/4”
06N
06G
06R
1”
08N
08G
08R
1 1/4”
10N
10G
10R
1 1/2”
12N
12G
12R
2”
16N
16G
16R
Specification
Unified Thread
Specification
ASME B1.1
Thread Size
7/16-20UNF
4U
9/16-18UNF
6U
3/4-16UNF
8U
7/8-14UNF
10U
1 1/16-12UN
12U
1 5/16-12UN
16U
1 5/8-12UN
20U
Metric Thread
Thread TypeThread Size
M8 1.0
M8
M8K
Metric Parallel
Metric Tapered(Keg)
DIN - 13
DIN - 158
M10 1.0
M10
M10K
M12 1.5
M12
M12K
M14 1.5
M14
M14K
M16 1.5
M16
M16K
M18 1.5
M18
M18K
.....
.....
.....
M42 2.0
M42
M42K
M48 2.0
M48
M48K
Specification
: Thread Size : See Thread Specification
: Elastiomer : ED-Ring & O - Ring seal (Refer to Seal Material)
: Fitting Material
Carbon Steel (DIN3859)
C
316 Stainless Steel (DIN17440/1.4571)
SS
Brass
B
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 11
INDEX
DUS 13Union
Tube to TubePart No.
Tube to Female PortPart No.
DUE 13Union Elbow
DRU 14Reducing Union
DUT 15Union Tee
DUC 15Union Cross
DRUT 16Reducing Union Tee
DBHU 17Bulkhead Union
DBUW 17Weld Bulkhead Union
DBUE 18Bulkhead Union Elbow
DCM-UO/MO 19Male Connector
with O-Ring
DCM-M 22Male Connector
DCM-MK 22Male Connector
DSE 29Swivel Adjustable
Elbow
DCM-R 21Male Connector
DCM-G 20Male Connector
DART 29Adjustable Run Tee
DABT 28Adjustable Branch Tee
Tube to Male ThreadPart No.
Tube to Tube Port(Adjustable Fittings)
Part No.
DCM-GED 23Male Connector
with ED-Ring
DCM-MED 24Male Connector
with ED-Ring
DCM-N 25Male Connector
DME-R/MK 26Male Elbow
DCF-G/M 27Female Connector
DAE 28Adjustable Elbow
DSRT 30Swivel Adjustable
Run Tee
DSBT 30Swivel Adjustable
Branch Tee
Tube Port to Female Port
Part No.
DRD 31Reducer
DSRAP 33Swivel Reducing
Adaptor
DAP-GED/MED 35Adaptor
DSAP-GED/MED 36Swivel Adaptor
Bite Type Tube Fitting for DIN 235312
INDEX
DBE-G/M 38Banjo Elbow
Banjo FittingsPart No.
DSLU 37Swivel Union
Tube Port to Tube PortPart No.
Gauge Connector & Test Couplings
Part No.
DHBE-G/M 39High Pressure
Banjo Elbow
DHBT-G/M 40High Pressure
Banjo Tee
DFGC-G 41Pressure Gauge
Connector
DSGC-G 41Pressure Gauge
Swivel Connector
DGAP-G 41Gauge Adaptor
DTPC 42Tee Test Point
Connector
DRWN 44Reducing Welding
DWN 44Welding Nipple
DAWC 43Welding Connector
with DWN
DBP-M 48Blanking Plugs
with ED-Ring
DBP-GED/MED 48Blanking Plugs for Port
with ED-Ring
DP 47Pulg
DC 47Tube Cap
Male & Female AdaptorsPart No.
Weld FittingsPart No.
DMFC 45Male Female
Connector
DWC 43Welding Connector
DTC 42Test Coupling
DMFG 45Male Female
Gauge Connector
DMFC-ED 46Male Female Connector
with ED-Ring
DMFG-ED 46Male Female Gauge
Connector with ED-Ring
DCR 49Cutting Ring
DNT 49Nut
Spare PartPart No.
Plugs & CapsPart No.
DED 49ED-Ring
DOR 49O-Ring
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 13
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
468
101268
101215182228354268
1012141620253038
10.012.014.017.019.014.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
9.011.012.014.017.012.014.017.019.024.027.032.041.046.055.014.017.019.022.024.027.032.041.046.055.0
31.032.035.035.035.039.040.042.043.046.048.052.054.063.066.045.047.049.051.057.057.066.074.080.090.0
12.09.0
12.012.011.010.011.013.014.016.016.020.021.020.021.016.018.017.019.022.021.023.026.027.029.0
DUS-04LLDUS-06LLDUS-08LLDUS-10LLDUS-12LLDUS-06LDUS-08LDUS-10LDUS-12LDUS-15LDUS-18LDUS-22LDUS-28LDUS-35LDUS-42LDUS-06SDUS-08SDUS-10SDUS-12SDUS-14SDUS-16SDUS-20SDUS-25SDUS-30SDUS-38S
LLVery LightPN 100
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
H h L A
Series Part NumberTubeO.D.
Dimension (mm)
H h L A468
101268
101215182228354268
1012141620253038
10.012.014.017.019.014.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
9.09.0
12.014.017.012.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
21.021.023.024.025.027.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
11.09.5
11.512.513.012.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
DUE-04LLDUE-06LLDUE-08LLDUE-10LLDUE-12LLDUE-06LDUE-08LDUE-10LDUE-12LDUE-15LDUE-18LDUE-22LDUE-28LDUE-35LDUE-42LDUE-06SDUE-08SDUE-10SDUE-12SDUE-14SDUE-16SDUE-20SDUE-25SDUE-30SDUE-38S
LLVery LightPN 100
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
DUSUnion
DUEUnion Elbow
Bite Type Tube Fitting for DIN 235314All dimensions in millimeters. Dimensions given approximate length with tightened nut.
11.0
12.0
12.0
13.0
13.0
14.0
15.0
15.0
15.5
15.5
16.5
17.5
18.5
18.0
19.0
21.0
21.0
21.0
18.0
17.5
17.5
19.5
19.5
19.0
20.5
20.5
20.0
21.5
22.0
22.0
23.0
25.0
25.5
26.0
26.5
29.5
40.0
41.0
41.0
42.0
42.0
43.0
45.0
45.0
46.0
46.0
48.0
48.0
50.0
50.0
52.0
54.0
59.0
59.0
47.0
48.0
48.0
50.0
50.0
51.0
54.0
54.0
54.0
57.0
60.0
60.0
63.0
68.0
71.0
74.0
77.0
87.0
14.0
17.0
17.0
19.0
19.0
19.0
24.0
24.0
27.0
27.0
27.0
32.0
32.0
32.0
41.0
41.0
46.0
46.0
17.0
19.0
19.0
22.0
22.0
22.0
24.0
24.0
27.0
27.0
32.0
32.0
32.0
41.0
41.0
46.0
46.0
55.0
14.0
14.0
17.0
14.0
17.0
19.0
19.0
22.0
19.0
22.0
27.0
22.0
27.0
32.0
32.0
36.0
36.0
41.0
17.0
17.0
19.0
17.0
19.0
22.0
22.0
24.0
24.0
27.0
22.0
24.0
30.0
30.0
36.0
36.0
46.0
50.0
17.0
19.0
19.0
22.0
22.0
22.0
27.0
27.0
32.0
32.0
32.0
36.0
36.0
36.0
41.0
41.0
50.0
50.0
19.0
22.0
22.0
24.0
24.0
24.0
27.0
27.0
30.0
30.0
36.0
36.0
36.0
46.0
46.0
50.0
50.0
60.0
6
6
8
6
8
10
10
12
10
12
15
12
15
18
18
22
22
28
6
6
8
6
8
10
10
12
12
14
10
12
16
16
20
20
25
30
8
10
10
12
12
12
15
15
18
18
18
22
22
22
28
28
35
35
8
10
10
12
12
12
14
14
16
16
20
20
20
25
25
30
30
38
DRU-08L-06L
DRU-10L-06L
DRU-10L-08L
DRU-12L-06L
DRU-12L-08L
DRU-12L-10L
DRU-15L-10L
DRU-15L-12L
DRU-18L-10L
DRU-18L-12L
DRU-18L-15L
DRU-22L-12L
DRU-22L-15L
DRU-22L-18L
DRU-28L-18L
DRU-28L-22L
DRU-35L-22L
DRU-35L-28L
DRU-08S-06S
DRU-10S-06S
DRU-10S-08S
DRU-12S-06S
DRU-12S-08S
DRU-12S-10S
DRU-14S-10S
DRU-14S-12S
DRU-16S-12S
DRU-16S-14S
DRU-20S-10S
DRU-20S-12S
DRU-20S-16S
DRU-25S-16S
DRU-25S-20S
DRU-30S-20S
DRU-30S-25S
DRU-38S-30S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTube O.D. Dimension (mm)
ALhH2H1d2d1
DRUReducing Union
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 15
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
468
101268
101215182228354268
1012141620253038
10.012.014.017.019.014.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
9.09.0
12.014.014.012.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
21.021.023.024.027.027.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
11.09.5
11.512.515.012.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
DUT-04LLDUT-06LLDUT-08LLDUT-10LLDUT-12LLDUT-06LDUT-08LDUT-10LDUT-12LDUT-15LDUT-18LDUT-22LDUT-28LDUT-35LDUT-42LDUT-06SDUT-08SDUT-10SDUT-12SDUT-14SDUT-16SDUT-20SDUT-25SDUT-30SDUT-38S
LLVery LightPN 100
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
H h L A
Series Part NumberTubeO.D.
Dimension (mm)
H h L A
468
101268
101215182228354268
1012141620253038
10.012.014.017.019.014.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
9.09.012.014.014.012.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
21.021.023.024.027.027.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
11.09.5
11.512.515.012.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
DUC-04LLDUC-06LLDUC-08LLDUC-10LLDUC-12LLDUC-06LDUC-08LDUC-10LDUC-12LDUC-15LDUC-18LDUC-22LDUC-28LDUC-35LDUC-42LDUC-06SDUC-08SDUC-10SDUC-12SDUC-14SDUC-16SDUC-20SDUC-25SDUC-30SDUC-38S
LLVery LightPN 100
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
DUTUnion Tee
DUCUnion Cross
Bite Type Tube Fitting for DIN 235316All dimensions in millimeters. Dimensions given approximate length with tightened nut.
14.014.015.015.015.015.015.017.017.017.017.017.017.017.021.021.021.021.021.021.021.023.524.024.024.024.023.528.028.028.028.027.527.527.531.031.031.030.530.530.518.022.022.021.524.526.026.025.525.526.529.529.528.530.033.531.535.5
14.014.015.015.015.015.015.017.017.017.017.017.017.017.021.021.021.021.021.021.021.024.024.023.523.523.524.027.527.528.027.527.527.527.530.530.530.530.530.530.517.522.021.521.525.524.524.524.524.528.526.526.526.531.530.030.037.0
14.014.015.015.015.015.015.017.017.017.017.017.017.017.021.021.021.021.021.021.021.024.023.523.523.523.523.527.527.527.527.527.527.527.530.530.530.530.530.530.517.521.521.521.525.524.524.524.524.528.526.526.526.531.530.030.037.0
292930303030303232323232323236363636363636403939393940434343434444444646464747473337373843414142424846464754525362
292930303030303232323232323236363636363636393940404039444443444444444447474747473437383842434343434748484853545461
292930303030303232323232323236363636363636394040404040444444444444444747474747473438383842434343434748484853545461
141414141414141717171717171719191919191919242424242427272727272727273636363636361717171724242424242727272736363641
171419191417192214171719192227271419222227321919222732192227273232361922273236361719192230171922243622243046303650
141714171919141722172219221919222727222722221932323219363627363236324141414136412219242424303030303036363636464646
141714171919191722222222222219222727272727223232323232363636363636364141414141412224242424303030303036363636464646
86101068101268810101215156101212151810101215181012151518182210121518222268810166810122010121625162030
6868101068128121012101012151512151212101818181022221522182218282828282228108121212161616161620202020252525
6868101010812121212121210121515151515121818181818222222222222222828282828281012121212161616161620202020252525
DRUT-06L-06L-08LDRUT-08L-08L-06LDRUT-06L-06L-10LDRUT-08L-08L-10LDRUT-10L-10L-06LDRUT-10L-10L-08LDRUT-10L-06L-10LDRUT-08L-08L-12LDRUT-12L-12L-06LDRUT-12L-08L-08LDRUT-12L-12L-08LDRUT-12L-10L-10LDRUT-12L-12L-10LDRUT-12L-10L-12LDRUT-10L-10L-15LDRUT-12L-12L-15LDRUT-15L-15L-06LDRUT-15L-15L-10LDRUT-15L-12L-12LDRUT-15L-15L-12LDRUT-15L-12L-15LDRUT-12L-12L-18LDRUT-18L-10L-10LDRUT-18L-18L-10LDRUT-18L-18L-12LDRUT-18L-18L-15LDRUT-18L-10L-18LDRUT-22L-22L-10LDRUT-22L-22L-12LDRUT-22L-15L-15LDRUT-22L-22L-15LDRUT-22L-18L-18LDRUT-22L-22L-18LDRUT-22L-18L-22LDRUT-28L-28L-10LDRUT-28L-28L-12LDRUT-28L-28L-15LDRUT-28L-28L-18LDRUT-28L-22L-22LDRUT-28L-28L-22LDRUT-10S-10S-06SDRUT-12S-08S-08SDRUT-12S-12S-08SDRUT-12S-12S-10SDRUT-12S-12S-16SDRUT-16S-16S-06SDRUT-16S-16S-08SDRUT-16S-16S-10SDRUT-16S-16S-12SDRUT-16S-16S-20SDRUT-20S-20S-10SDRUT-20S-20S-12SDRUT-20S-20S-16SDRUT-20S-20S-25SDRUT-25S-25S-16SDRUT-25S-25S-20SDRUT-25S-25S-30S
L LightPN 316
PN 315
PN 315
PN 315
PN 315
PN 160
PN 160
S HeavyPN 630
PN 400
PN 400
PN 400
Series Part NumberTube O.D. Dimension (mm)
d1 d2 d3 H1 H2 H3 h L1 L2 L3 A1 A2 A3
DRUTReducing Union Tee
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 17
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
M12 1.5M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
7.08.0
10.010.012.013.516.518.518.519.012.013.014.514.517.016.517.520.021.522.0
27.027.028.029.031.032.534.535.536.536.029.029.029.530.532.031.533.535.037.537.0
22.023.025.025.027.030.033.035.040.042.027.028.031.031.035.035.039.044.048.053.0
42.042.043.044.046.049.051.052.058.059.044.044.046.047.050.050.055.059.064.068.0
17.019.022.024.027.032.036.041.050.060.019.022.024.027.030.032.041.046.050.065.0
17.019.022.024.030.036.041.046.055.065.019.022.024.027.030.032.041.046.050.065.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
68
101215182228354268
1012141620253038
DBHU-06LDBHU-08LDBHU-10LDBHU-12LDBHU-15LDBHU-18LDBHU-22LDBHU-28LDBHU-35LDBHU-42LDBHU-06SDBHU-08SDBHU-10SDBHU-12SDBHU-14SDBHU-16SDBHU-20SDBHU-25SDBHU-30SDBHU-38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
A1AL1LhH1H T
Series Part NumberTubeO.D.
Dimension (mm)
H D L A
68
101215182228354268
1012141620253038
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
18.020.022.025.028.032.036.040.050.060.020.022.025.028.030.035.038.045.050.060.0
85.085.087.087.0
100.0101.0105.0106.0114.0115.089.089.091.091.0
107.0107.0114.0120.0126.0133.0
56.056.058.058.070.069.073.073.071.070.060.060.059.059.072.071.071.072.073.072.0
DBUW-06LDBUW-08LDBUW-10LDBUW-12LDBUW-15LDBUW-18LDBUW-22LDBUW-28LDBUW-35LDBUW-42LDBUW-06SDBUW-08SDBUW-10SDBUW-12SDBUW-14SDBUW-16SDBUW-20SDBUW-25SDBUW-30SDBUW-38S
LLightPN 315
PN 315
SHeavyPN 630
PN 400
PN 315
DBHUBulkhead Union
DBUWWeld Bulkhead Union
Bite Type Tube Fitting for DIN 235318All dimensions in millimeters. Dimensions given approximate length with tightened nut.
M12 1.5M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
27.027.028.029.031.032.534.535.536.536.029.029.029.530.532.031.533.535.037.537.0
12.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
14.017.018.020.023.024.030.034.039.043.017.018.020.021.023.024.030.034.039.043.0
42.042.043.044.046.049.051.052.058.059.044.044.046.047.050.050.055.059.064.068.0
27.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
12.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
17.019.022.024.030.036.041.046.055.065.019.022.024.027.030.032.041.046.050.065.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
68
101215182228354268
1012141620253038
DBUE-06LDBUE-08LDBUE-10LDBUE-12LDBUE-15LDBUE-18LDBUE-22LDBUE-28LDBUE-35LDBUE-42LDBUE-06SDBUE-08SDBUE-10SDBUE-12SDBUE-14SDBUE-16SDBUE-20SDBUE-25SDBUE-30SDBUE-38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
A1AL2L1LhH1H T
DBUEBulkhead Union Elbow
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 19
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Unified Thread Type
7/16-20UNF-2A7/16-20UNF-2A9/16-18UNF-2A3/4-16UNF-2A7/8-14UNF-2A3/4-16UNF-2A7/8-14UNF-2A3/4-16UNF-2A7/8-14UNF-2A7/8-14UNF-2A
1 1/16-12UN-2A1 5/16-12UN-2A1 1/16-12UN-2A1 5/16-12UN-2A1 5/16-12UN-2A1 5/8-12UN-2A1 5/8-12UN-2A7/16-20UNF-2A9/16-18UNF-2A9/16-18UNF-2A3/4-16UNF-2A3/4-16UNF-2A7/8-14UNF-2A3/4-16UNF-2A7/8-14UNF-2A
1 1/16-12UN-2A1 1/16-12UN-2A1 5/16-12UN-2A1 5/16-12UN-2A1 5/8-12UN-2A1 5/8-12UN-2A
10.011.011.013.014.314.015.314.514.816.816.517.517.517.517.517.519.015.014.514.517.515.518.820.520.820.523.023.023.523.526.0
9.010.010.011.012.711.012.711.012.712.715.015.015.015.015.015.015.09.0
10.010.011.011.012.711.012.715.015.015.015.015.015.0
25.026.026.028.029.029.030.031.031.033.033.034.034.034.039.039.042.030.031.031.034.034.037.042.042.042.047.047.050.050.057.0
14.414.417.622.325.522.325.522.325.525.531.938.231.938.238.247.747.716.017.617.622.322.325.522.325.531.931.938.238.247.747.7
17.017.019.024.027.024.027.027.027.032.032.041.041.041.046.050.055.017.019.022.024.024.027.032.032.032.036.041.046.050.055.0
17.019.022.022.022.027.027.032.032.036.036.036.041.041.050.050.060.019.022.024.024.030.030.036.036.036.046.046.050.050.060.0
810121212151518182222222828353542810121216162020202525303038
DCM-08L-04UODCM-10L-04UODCM-12L-06UODCM-12L-08UODCM-12L-10UODCM-15L-08UODCM-15L-10UODCM-18L-08UODCM-18L-10UODCM-22L-10UODCM-22L-12UODCM-22L-16UODCM-28L-12UODCM-28L-16UODCM-35L-16UODCM-35L-20UODCM-42L-20UODCM-08S-04UODCM-10S-06UODCM-12S-06UODCM-12S-08UODCM-16S-08UODCM-16S-10UODCM-20S-08UODCM-20S-10UODCM-20S-12UODCM-25S-12UODCM-25S-16UODCM-30S-16UODCM-30S-20UODCM-38S-20UO
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
BALIhH T
Metric Parallel Tread Type
M10 1.0M12 1.5M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M33 2.0M42 2.0M12 1.0M14 1.5M16 1.5M18 1.5M22 1.5M27 2.0M33 2.0M42 2.0
68
1012151822283568
101216202530
14.017.019.022.027.032.036.041.050.017.019.022.024.030.036.046.050.0
14.017.019.022.024.027.032.041.050.017.019.022.024.027.032.041.050.0
-------
38.048.0
------
38.048.0
23.025.026.027.029.030.032.034.039.027.027.029.029.033.037.041.045.0
10.011.511.513.014.515.516.019.019.511.511.513.014.515.519.019.019.5
8.510.011.012.013.514.016.017.517.512.012.012.513.015.015.017.018.5
DCM-06L-MO10DCM-08L-MO12DCM-10L-MO14DCM-12L-MO16DCM-15L-MO18DCM-18L-MO22DCM-22L-MO26DCM-28L-MO33DCM-35L-MO42DCM-06S-MO12DCM-08S-MO14DCM-10S-MO16DCM-12S-MO18DCM-16S-MO22DCM-20S-MO27DCM-25S-MO33DCM-30S-MO42
LLightPN 315
PN 160
SHeavyPN 630
PN 400
Series Part NumberTubeO.D.
Dimension (mm)
BALIhH T
DCM-UO/MO (Unified/Mertic Parallel)Male Connector with O-Ring
Bite Type Tube Fitting for DIN 235320All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BSP Parallel Thread Type
PF 1/8PF 1/4PF 3/8PF 1/2PF 1/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/4PF 3/8PF 1/2PF 3/4PF 3/8PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 1PF 1 1/4PF 1 1/2PF 1/4PF 1/2PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 1PF 1 1/4PF 1 1/4PF 1 1/2
8.012.012.014.08.0
12.012.014.012.012.014.012.012.014.016.012.014.016.012.014.016.014.016.016.018.018.020.022.012.014.012.012.012.012.014.012.012.014.012.014.012.014.016.014.016.016.018.018.020.020.022.0
8.510.011.512.08.510.011.512.011.012.513.012.012.513.014.013.514.015.014.014.514.516.516.517.517.517.517.519.013.018.015.015.514.515.017.516.517.017.518.519.018.018.520.520.520.523.023.023.523.526.026.0
23.025.026.027.023.025.026.027.026.027.028.027.027.028.029.029.029.030.029.531.030.033.033.034.034.039.039.042.028.033.030.030.031.031.034.033.033.034.036.037.036.037.039.042.042.047.047.050.050.057.057.0
14.018.022.026.014.018.022.026.018.022.026.018.022.026.032.022.026.032.022.026.032.026.032.032.039.039.049.055.018.026.018.022.018.022.026.018.022.026.022.026.022.026.032.026.032.032.039.039.049.049.055.0
14.019.022.027.014.019.022.027.019.022.027.019.022.027.032.024.027.032.027.027.032.032.032.041.041.046.050.055.019.027.019.022.019.022.027.022.022.027.024.027.027.027.032.032.032.041.041.046.050.055.055.0
14.014.014.014.017.017.017.017.019.019.019.022.022.022.022.027.027.027.032.032.032.036.036.041.041.050.050.060.017.017.019.019.022.022.022.024.024.024.027.027.030.030.030.036.036.046.046.050.050.060.060.0
66668888
10101012121212151515181818222228283535426688
10101012121214141616162020252530303838
DCM-06L-01GDCM-06L-02GDCM-06L-03GDCM-06L-04GDCM-08L-01GDCM-08L-02GDCM-08L-03GDCM-08L-04GDCM-10L-02GDCM-10L-03GDCM-10L-04GDCM-12L-02GDCM-12L-03GDCM-12L-04GDCM-12L-06GDCM-15L-03GDCM-15L-04GDCM-15L-06GDCM-18L-03GDCM-18L-04GDCM-18L-06GDCM-22L-04GDCM-22L-06GDCM-28L-06GDCM-28L-08GDCM-35L-08GDCM-35L-10GDCM-42L-12GDCM-06S-02GDCM-06S-04GDCM-08S-02GDCM-08S-03GDCM-10S-02GDCM-10S-03GDCM-10S-04GDCM-12S-02GDCM-12S-03GDCM-12S-04GDCM-14S-03GDCM-14S-04GDCM-16S-03GDCM-16S-04GDCM-16S-06GDCM-20S-04GDCM-20S-06GDCM-25S-06GDCM-25S-08GDCM-30S-08GDCM-30S-10GDCM-38S-10GDCM-38S-12G
LLightPN 315
PN 160
SHeavyPB 630
PB 400
PB 250
Series Part NumberTubeO.D.
Dimension (mm)
BALIhH T
DCM-G (BSP Parallel)Male Connector
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 21
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BSP Tapered Thread Type
PT 1/8PT 1/8PT 1/8PT 1/4PT 1/4PT 1/4PT 3/8PT 1/8PT 1/4PT 1/4PT 1/4PT 3/8PT 1/2PT 3/8PT 1/2PT 1/2PT 3/4
4688
10121268
1012121215151822
10.012.014.014.017.019.019.014.017.019.022.022.022.027.027.032.036.0
11.011.012.014.014.017.017.012.017.017.019.019.024.024.024.027.032.0
26.026.028.032.032.032.032.030.035.036.037.037.039.038.040.041.046.0
16.014.516.520.520.520.020.015.020.021.022.022.024.023.025.025.529.5
8.08.08.0
12.012.012.012.08.012.012.012.012.014.012.014.014.016.0
DCM-04LL-01RDCM-06LL-01RDCM-08LL-01RDCM-08LL-02RDCM-10LL-02RDCM-12LL-02RDCM-12LL-03RDCM-06L-01RDCM-08L-02RDCM-10L-02RDCM-12L-02RDCM-12L-03RDCM-12L-04RDCM-15L-03RDCM-15L-04RDCM-18L-04RDCM-22L-06R
LLVery LightPN 100
LLightPN 315
PN 160
Series Part NumberTubeO.D.
Dimension (mm)
BALhH T
DCM-R (BSP Tapered)Male Connector
Bite Type Tube Fitting for DIN 235322All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Metric Parallel Thread Type
M10 1.0M12 1.5M18 1.5M14 1.5M16 1.5M18 1.5M22 1.5M14 1.5M16 1.5M18 1.5M22 1.5M16 1.5M18 1.5M22 1.5M18 1.5M22 1.5M22 1.5M26 1.5M33 2.0M42 2.0M48 2.0M12 1.5M14 1.5M16 1.5M18 1.5M22 1.5M20 1.5M18 1.5M22 1.5M27 2.0M33 2.0M42 2.0M48 2.0
68810101010121212121515151818222228354268
10121214161620253038
14.017.017.019.019.019.019.022.022.022.022.027.027.027.032.032.036.036.041.050.060.017.019.022.024.024.027.030.030.036.046.050.060.0
14.017.024.019.022.024.027.019.022.024.027.024.024.027.027.027.032.032.041.050.055.017.019.022.024.027.027.027.027.032.041.050.055.0
14.017.023.019.021.023.027.019.021.023.027.021.023.027.023.027.027.031.039.049.055.017.019.021.023.027.025.023.027.032.039.049.055.0
23.025.0.26.026.027.027.029.026.027.027.029.028.029.030.030.031.033.033.034.039.042.028.030.031.033.034.037.036.037.042.047.050.057.0
8.510.011.511.012.012.514.011.012.512.514.013.013.515.014.014.516.516.517.517.519.013.015.015.017.017.519.018.018.520.523.023.526.0
8.012.012.012.012.012.014.012.012.012.014.012.012.014.012.014.014.016.018.020.022.012.012.012.012.014.014.012.014.016.018.020.022.0
DCM-06L-M10DCM-08L-M12DCM-08L-M18DCM-10L-M14DCM-10L-M16DCM-10L-M18DCM-10L-M22DCM-12L-M14DCM-12L-M16DCM-12L-M18DCM-12L-M22DCM-15L-M16DCM-15L-M18DCM-15L-M22DCM-18L-M18DCM-18L-M22DCM-22L-M22DCM-22L-M26DCM-28L-M33DCM-35L-M42DCM-42L-M48DCM-06S-M12DCM-08S-M14DCM-10S-M16DCM-12S-M18DCM-12S-M22DCM-14S-M20DCM-16S-M18DCM-16S-M22DCM-20S-M27DCM-25S-M33DCM-30S-M42DCM-38S-M48
LLightPN 315
PN 160
SHeavyPB 630
PB 400
PB 250
Series Part NumberTubeO.D.
Dimension (mm)
BALIhH T
Metric Tapered Thread Type
M6 1kegM8 1kegM10 1kegM10 1keg
4468
10101214
9101112
26262628
1616
14.516.5
8888
DCM-04LL-M06KDCM-04LL-M08KDCM-06LL-M10KDCM-08LL-M10K
LLVery LightPN 100
Series Part NumberTubeO.D.
Dimension (mm)
BALhH T
H hT
B
A
L
DCM-M (Metric Parallel)
DCM-MK (Metric Tapered)
Male Connector
Male Connector
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 23
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DCM-GED (BSP Parallel with ED-Ring)Male Connector with ED-Ring
BSP Parallel Thread Type
PF 1/8PF 1/4PF 1/8PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 3/4PF 1PF 1 1/4PF 1 1/2PF 1/4PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 1/2PF 3/8PF 1/2PF 3/4PF 3/4PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2
8.012.08.0
12.012.012.012.014.012.012.014.012.014.014.016.016.018.020.022.012.012.012.012.012.014.012.012.014.014.012.014.016.016.014.016.018.020.022.0
8.510.09.510.011.511.012.513.012.012.513.013.514.014.514.516.517.517.519.013.015.015.514.515.017.516.517.017.519.018.018.520.520.523.023.023.023.526.0
23.025.024.025.026.026.027.028.027.027.028.029.029.031.031.033.034.039.042.028.030.030.031.031.034.033.033.034.037.036.037.039.042.047.047.047.050.057.0
14.019.014.019.022.019.022.027.019.022.027.022.027.027.032.032.040.050.055.019.019.022.019.022.027.019.022.032.027.022.027.027.032.027.032.040.050.055.0
14.019.014.019.022.019.022.027.019.022.027.024.027.027.032.032.041.050.055.019.019.022.019.022.027.022.022.027.027.027.027.032.032.041.041.041.050.055.0
14.014.017.017.017.019.019.019.022.022.022.027.027.032.032.036.041.050.060.017.019.019.022.022.022.024.024.024.027.030.030.030.036.046.046.046.050.060.0
66888
1010101212121515181822283542688
10101012121214161616202525253038
DCM-06L-01GEDDCM-06L-02GEDDCM-08L-01GEDDCM-08L-02GEDDCM-08L-03GEDDCM-10L-02GEDDCM-10L-03GEDDCM-10L-04GEDDCM-12L-02GEDDCM-12L-03GEDDCM-12L-04GEDDCM-15L-03GEDDCM-15L-04GEDDCM-18L-04GEDDCM-18L-06GEDDCM-22L-06GEDDCM-28L-08GEDDCM-35L-10GEDDCM-42L-12GEDDCM-06S-02GEDDCM-08S-02GEDDCM-08S-03GEDDCM-10S-02GEDDCM-10S-03GEDDCM-10S-04GEDDCM-12S-02GEDDCM-12S-03GEDDCM-12S-04GEDDCM-14S-04GEDDCM-16S-03GEDDCM-16S-04GEDDCM-16S-06GEDDCM-20S-06GEDDCM-25S-04GEDDCM-25S-06GEDDCM-25S-08GEDDCM-30S-10GEDDCM-38S-12GED
LLightPN 315
PN 160
SHeavyPB 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
BALIhH T
Bite Type Tube Fitting for DIN 235324All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DCM-MED (Metric Parallel with ED-Ring)Male Connector with ED-Ring
Metric Parallel Thread Type
M10 1.0M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M18 1.5M22 1.5M22 1.5M26 1.5M33 2.0M42 2.0M48 2.0M12 1.5M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M27 2.0M33 2.0M42 2.0M48 2.0
68
101212121515182228354268
1012141620253038
14.017.019.022.022.022.027.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
14.017.019.022.024.027.024.027.027.032.041.050.055.017.019.022.024.027.027.032.041.050.055.0
14.017.019.022.024.027.024.027.027.032.040.050.055.017.019.022.024.026.027.032.040.050.055.0
23.025.026.027.027.029.029.030.031.033.034.039.042.028.030.031.033.037.037.042.047.050.057.0
8.510.011.012.512.514.013.515.014.516.517.517.519.013.015.015.017.019.018.520.523.023.526.0
8.012.012.012.012.014.012.014.014.016.018.020.022.012.012.012.012.014.014.016.018.020.022.0
DCM-06L-M10EDDCM-08L-M12EDDCM-10L-M14EDDCM-12L-M16EDDCM-12L-M18EDDCM-12L-M22EDDCM-15L-M18EDDCM-15L-M22EDDCM-18L-M22EDDCM-22L-M26EDDCM-28L-M33EDDCM-35L-M42EDDCM-42L-M48EDDCM-06S-M12EDDCM-08S-M14EDDCM-10S-M16EDDCM-12S-M18EDDCM-14S-M20EDDCM-16S-M22EDDCM-20S-M27EDDCM-25S-M33EDDCM-30S-M42EDDCM-38S-M48ED
LLightPN315
PN 160
Series Part NumberTubeO.D.
Dimension (mm)
BALIhH T
SHeavyPB 630
PN 400
PN 315
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 25
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
NPT Thread Type
NPT 1/8NPT 1/8NPT 1/8NPT 1/8NPT 1/4NPT 1/4NPT 1/4NPT 3/8NPT 1/4NPT 3/8NPT 1/2NPT 1/2NPT 1/2NPT 3/4NPT 1NPT 1 1/4NPT 1 1/2NPT 1/4NPT 1/4NPT 1/4NPT 3/8NPT 1/4NPT 3/8NPT 1/2NPT 1/2NPT 1/2NPT 3/4NPT 1NPT 1 1/4NPT 1 1/2
468668
101012121215182228354268
1010121212141620253038
10.012.014.014.014.017.019.019.022.022.022.027.032.036.041.050.060.017.019.022.022.024.024.024.027.030.036.046.050.060.0
11.011.012.012.017.017.017.019.019.019.022.024.027.032.041.046.055.017.017.019.019.022.022.022.024.027.032.041.046.055.0
28.028.030.032.038.038.039.040.040.040.045.046.048.050.056.062.065.043.043.044.044.046.046.051.054.054.059.069.073.080.0
18.516.518.517.023.023.024.025.025.025.030.031.031.533.539.540.542.028.028.027.527.529.529.534.536.035.537.545.046.549.0
9.99.99.99.914.214.214.214.214.214.219.119.119.119.123.923.925.414.214.214.214.214.214.219.119.119.119.123.923.925.4
DCM-04LL-01NDCM-06LL-01NDCM-08LL-01NDCM-06L-01NDCM-06L-02NDCM-08L-02NDCM-10L-02NDCM-10L-03NDCM-12L-02NDCM-12L-03NDCM-12L-04NDCM-15L-04NDCM-18L-04NDCM-22L-06NDCM-28L-08NDCM-35L-10NDCM-42L-12NDCM-06S-02NDCM-08S-02NDCM-10S-02NDCM-10S-03NDCM-12S-02NDCM-12S-03NDCM-12S-04NDCM-14S-04NDCM-16S-04NDCM-20S-06NDCM-25S-08NDCM-30S-10NDCM-38S-12N
LLVery LightPN 100
LLightPN 315
Series Part NumberTubeO.D.
Dimension (mm)
H h L A B T
PN 160
SHeavyPN 630
PN 400
PN 315
DCM-N (NPT Thread)Male Connector
Bite Type Tube Fitting for DIN 235326All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Metric Tapered Thread Type
M8 1.0KegM10 1.0KegM10 1.0KegM10 1.0Keg M12 1.5KegM14 1.5KegM16 1.5KegM18 1.5KegM22 1.5KegM12 1.5KegM14 1.5KegM16 1.5KegM18 1.5KegM20 1.5KegM22 1.5Keg
46868
1012151868
10121416
10.012.014.014.017.019.022.027.032.017.019.022.024.027.030.0
9.09.0
12.012.012.014.017.019.024.012.014.017.017.019.024.0
21.021.023.027.029.030.032.036.040.031.032.034.038.040.043.0
17.017.020.020.026.027.028.034.036.026.027.028.028.032.032.0
11.09.5
11.512.014.015.017.021.023.516.017.017.521.522.024.5
8.08.08.08.012.012.014.014.017.012.012.012.012.014.017.0
DME-04LL-M08KDME-06LL-M10KDME-08LL-M10KDME-06L-M10KDME-08L-M12KDME-10L-M14KDME-12L-M16KDME-15L-M18KDME-18L-M22KDME-06S-M12KDME-08S-M14KDME-10S-M16KDME-12S-M18KDME-14S-M20KDME-16S-M22K
LLVery LightPN 100
LLightPN 315
Series Part NumberTubeO.D.
Dimension (mm)
A1AL1LhH T
SHeavyPN 400
BSP Tapered Thread Type
PT 1/8PT 1/8PT 1/8PT 1/4PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/2PT 1/2PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2
4.06.08.0
10.012.06.08.0
10.012.015.018.06.08.0
10.012.014.016.0
10.012.014.017.019.014.017.019.022.027.032.017.019.022.024.027.030.0
9.09.0
12.014.017.012.012.014.017.019.024.012.014.017.017.019.024.0
21.021.023.024.025.027.029.030.032.036.040.031.032.034.038.040.043.0
17.017.020.023.023.020.026.027.028.034.036.026.027.028.028.034.036.0
11.09.5
11.512.513.012.014.015.017.021.023.516.017.017.521.522.024.5
10.010.010.014.014.010.014.014.015.019.019.014.014.015.015.019.019.0
DME-04LL-01RDME-06LL-01RDME-08LL-01RDME-10LL-02RDME-12LL-02RDME-06L-01RDME-08L-02RDME-10L-02RDME-12L-03RDME-15L-04RDME-18L-04RDME-06S-02RDME-08S-02RDME-10S-03RDME-12S-03RDME-14S-04RDME-16S-04R
LLVery LightPN 100
LLightPN 315
Series Part NumberTubeO.D.
Dimension (mm)
A1AL1LhH T
SHeavyPN 400
DME-R/MK (BSP Tapered/Metric Tapered)Male Elbow
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 27
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
BSP Parallel Thread Type
PF 1/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2PF 1/4PF 1/4PF 3/8PF 3/8PF 1/2PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2
12.017.017.020.017.017.020.017.020.020.020.022.024.526.528.517.017.017.017.020.020.022.024.526.528.5
19.024.025.029.025.026.030.026.030.031.030.535.538.041.042.526.026.026.526.532.031.534.537.542.043.5
34.039.040.044.040.041.045.041.045.046.047.052.055.063.065.041.041.043.043.050.050.056.062.069.074.0
14.019.024.027.019.024.027.024.027.027.027.036.041.055.060.019.019.024.024.030.030.036.041.055.060.0
14.017.017.017.019.019.019.022.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
4.06.06.06.08.08.08.0
10.010.012.015.019.024.030.036.04.05.07.08.0
10.012.016.020.025.032.0
6888
101010121215182228354268
1012141620253038
DCF-06L-01GDCF-08L-02GDCF-08L-03GDCF-08L-04GDCF-10L-02GDCF-10L-03GDCF-10L-04GDCF-12L-03GDCF-12L-04GDCF-15L-04GDCF-18L-04GDCF-22L-06GDCF-28L-08GDCF-35L-10GDCF-42L-12GDCF-06S-02GDCF-08S-02GDCF-10S-03GDCF-12S-03GDCF-14S-04GDCF-16S-04GDCF-20S-06GDCF-25S-08GDCF-30S-10GDCF-38S-12G
LLightPN 315
PB 160
SHeavyPB 630
PB 400
PB 315
Series Part NumberTubeO.D.
Dimension (mm)
BALhHd T
Metric Parallel Thread Type
M10 1.0M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M33 2.0M42 2.0M48 2.0M12 1.5M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M27 2.0M33 2.0M42 2.0M48 2.0
12.517.017.017.017.019.021.024.026.028.017.017.017.017.019.019.022.024.026.028.0
19.524.025.026.028.029.534.537.540.542.026.026.026.527.531.030.534.537.041.543.0
34.039.040.041.043.046.051.054.062.065.041.041.043.044.049.049.056.061.068.074.0
14.017.019.022.024.030.032.041.055.060.017.019.022.024.027.030.036.041.055.060.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
4.06.08.0
10.012.015.019.024.030.036.04.05.07.08.0
10.012.016.020.025.032.0
68
101215182228354268
1012141620253038
DCF-06L-M10DCF-08L-M12DCF-10L-M14DCF-12L-M16DCF-15L-M18DCF-18L-M22DCF-22L-M26DCF-28L-M33DCF-35L-M42DCF-42L-M48DCF-06S-M12DCF-08S-M14DCF-10S-M16DCF-12S-M18DCF-14S-M20DCF-16L-M22DCF-20L-M27DCF-25L-M33DCF-30L-M42DCF-38L-M48
LLightPB 315
PB 160
SHeavyPB 630
PB 400
PB 315
Series Part NumberTubeO.D.
Dimension (mm)
BALhHd T
DCF-G/M (BSP Parallel/Metric Parallel)Female Connector
Bite Type Tube Fitting for DIN 235328All dimensions in millimeters. Dimensions given approximate length with tightened nut.
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
12.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
26.027.529.029.532.535.538.541.551.056.027.027.530.031.035.040.044.550.055.063.0
27.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
12.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
68
101215182228354268
1012141620253038
68
101215182228354268
1012141620253038
DAE- 06LDAE -08LDAE -10LDAE -12LDAE -15LDAE -18LDAE -22LDAE -28LDAE -35LDAE -42LDAE -06SDAE -08SDAE -10SDAE -12SDAE -14SDAE -16SDAE -20SDAE -25SDAE -30SDAE -38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
AL1LhHD T
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
12.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
26.027.529.029.532.535.538.541.551.056.027.027.530.031.035.040.044.550.055.063.0
27.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
12.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
68
101215182228354268
1012141620253038
68
101215182228354268
1012141620253038
DABT -06LDABT -08LDABT -10LDABT -12LDABT -15LDABT -18LDABT -22LDABT -28LDABT -35LDABT -42LDABT -06SDABT -08SDABT -10SDABT -12SDABT -14SDABT -16SDABT -20SDABT -25SDABT -30SDABT -38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
AL1LhHD T
DABT
DAEAdjustable Elbow
Adjustable Branch Tee
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 29
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
12.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
26.027.529.029.532.535.538.541.551.056.027.027.530.031.035.036.544.550.055.063.0
27.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
12.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.036.050.060.0
68
101215182228354268
1012141620253038
DSE- 06LDSE -08LDSE -10LDSE -12LDSE -15LDSE -18LDSE -22LDSE -28LDSE -35LDSE -42LDSE -06SDSE -08SDSE -10SDSE -12SDSE -14SDSE -16SDSE -20SDSE -25SDSE -30SDSE -38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
AL1LhH T
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
26.027.529.029.532.535.538.541.551.056.027.027.530.031.035.040.044.550.055.063.0
12.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
53.056.059.062.069.075.083.091.0
111.0123.058.061.066.071.075.079.093.0
105.0119.0138.0
27.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
12.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
68
101215182228354268
1012141620253038
68
101215182228354268
1012141620253038
DART -06LDART -08LDART -10LDART -12LDART -15LDART -18LDART -22LDART -28LDART -35LDART -42LDART -06SDART -08SDART -10SDART -12SDART -14SDART -16SDART -20SDART -25SDART -30SDART -38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
BAL1LhHD T
DSE
DARTAdjustable Run Tee
Swivel Adjustable Elbow
Bite Type Tube Fitting for DIN 235330All dimensions in millimeters. Dimensions given approximate length with tightened nut.
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
12.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
26.027.529.029.532.535.538.541.551.056.027.027.530.031.035.036.544.550.055.063.0
27.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
12.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
68
101215182228354268
1012141620253038
DSBT-06LDSBT-08LDSBT-10LDSBT-12LDSBT-15LDSBT-18LDSBT-22LDSBT-28LDSBT-35LDSBT-42LDSBT-06SDSBT-08SDSBT-10SDSBT-12SDSBT-14SDSBT-16SDSBT-20SDSBT-25SDSBT-30SDSBT-38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.(D)
Dimension (mm)
AL1LhH T
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
12.014.015.017.021.023.527.530.534.540.016.017.017.521.522.024.526.530.035.541.0
53.056.059.061.069.075.082.089.0
107.0119.058.059.064.069.075.079.093.0
104.0117.0135.0
27.029.030.032.036.040.044.047.056.063.031.032.034.038.040.043.048.054.062.072.0
12.012.014.017.019.024.027.036.041.050.012.014.017.017.019.024.027.036.041.050.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
68
101215182228354268
1012141620253038
DSRT-06LDSRT-08LDSRT-10LDSRT-12LDSRT-15LDSRT-18LDSRT-22LDSRT-28LDSRT-35LDSRT-42LDSRT-06SDSRT-08SDSRT-10SDSRT-12SDSRT-14SDSRT-16SDSRT-20SDSRT-25SDSRT-30SDSRT-38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.(D)
Dimension (mm)
A26.027.529.029.532.535.538.541.551.056.027.027.530.031.035.036.544.550.055.063.0
BL1LhH T
DSRT
DSBTSwivel Adjustable Branch Tee
Swivel Adjustable Run Tee
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 31
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
25.527.527.527.527.528.529.029.030.030.031.031.032.032.033.033.033.034.034.035.034.533.033.034.034.035.036.036.538.538.539.539.540.540.042.042.041.041.042.042.043.042.544.544.543.5
40.042.043.042.043.044.044.044.045.045.046.046.047.047.049.048.048.049.049.050.051.048.048.049.049.050.051.053.053.053.055.055.056.056.058.059.056.056.058.058.060.060.062.064.067.0
12.012.014.014.014.017.019.019.019.019.019.019.019.019.022.024.024.024.024.024.027.030.030.030.030.030.030.032.036.036.036.036.036.036.036.036.046.046.046.046.046.046.046.046.046.0
14.014.017.014.017.019.014.017.019.022.014.017.019.022.027.014.017.019.022.027.032.014.017.019.022.027.032.036.014.017.019.022.027.032.036.041.014.017.019.022.027.032.036.041.050.0
66868
1068
101268
10121568
1012151868
101215182268
10121518222868
10121518222835
81010121212151515151818181818222222222222282828282828283535353535353535424242424242424242
DRD-08L-06LDRD-10L-06LDRD-10L-08LDRD-12L-06LDRD-12L-08LDRD-12L-10LDRD-15L-06LDRD-15L-08LDRD-15L-10LDRD-15L-12LDRD-18L-06LDRD-18L-08LDRD-18L-10LDRD-18L-12LDRD-18L-15LDRD-22L-06LDRD-22L-08LDRD-22L-10LDRD-22L-12LDRD-22L-15LDRD-22L-18LDRD-28L-06LDRD-28L-08LDRD-28L-10LDRD-28L-12LDRD-28L-15LDRD-28L-18LDRD-28L-22LDRD-35L-06LDRD-35L-08LDRD-35L-10LDRD-35L-12LDRD-35L-15LDRD-35L-18LDRD-35L-22LDRD-35L-28LDRD-42L-06LDRD-42L-08LDRD-42L-10LDRD-42L-12LDRD-42L-15LDRD-42L-18LDRD-42L-22LDRD-42L-28LDRD-42L-35L
LLightPN 315
Series Part NumberTube O.D. Dimension (mm)
ALhHD2D1
Reducer
PN 160
DRD
Bite Type Tube Fitting for DIN 235332All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Series Part NumberTube O.D. Dimension (mm)
ALhHD2D128.030.530.532.532.532.036.536.536.036.038.538.538.038.539.543.043.042.542.544.043.547.547.547.047.048.548.048.052.052.051.551.553.052.552.553.057.057.056.556.558.057.557.558.058.5
43.045.045.047.047.048.051.051.052.052.053.053.054.055.057.058.058.059.059.062.062.062.062.063.063.066.066.070.067.067.068.068.071.071.074.077.072.072.073.073.076.076.079.082.089.0
14.014.017.014.017.019.017.017.019.022.017.017.019.022.022.022.022.022.022.022.024.027.027.027.027.027.027.030.032.032.032.032.032.032.032.036.041.041.041.041.041.041.041.041.046.0
17.017.019.017.019.022.017.019.022.024.017.019.022.024.027.017.019.022.024.027.030.017.019.022.024.027.030.036.017.019.022.024.027.030.036.046.017.019.022.024.027.030.036.046.050.0
66868
1068
101268
10121468
1012141668
101214162068
10121416202568
10121416202530
81010121212141414141616161616202020202020252525252525253030303030303030383838383838383838
DRD-08S-06SDRD-10S-06SDRD-10S-08SDRD-12S-06SDRD-12S-08SDRD-12S-10SDRD-14S-06SDRD-14S-08SDRD-14S-10SDRD-14S-12SDRD-16S-06SDRD-16S-08SDRD-16S-10SDRD-16S-12SDRD-16S-14SDRD-20S-06SDRD-20S-08SDRD-20S-10SDRD-20S-12SDRD-20S-14SDRD-20S-16SDRD-25S-06SDRD-25S-08SDRD-25S-10SDRD-25S-12SDRD-25S-14SDRD-25S-16SDRD-25S-20SDRD-30S-06SDRD-30S-08SDRD-30S-10SDRD-30S-12SDRD-30S-14SDRD-30S-16SDRD-30S-20SDRD-30S-25SDRD-38S-06SDRD-38S-08SDRD-38S-10SDRD-38S-12SDRD-38S-14SDRD-38S-16SDRD-38S-20SDRD-38S-25SDRD-38S-30S
SHeavyPN 630
Reducer
PN 400
PN 315
DRD
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 33
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
24.524.524.525.025.026.027.527.528.528.528.028.029.529.530.532.032.033.033.034.033.534.034.035.035.036.035.537.540.040.041.041.042.041.543.543.540.540.541.541.542.542.044.044.043.0
39.039.539.540.040.041.042.042.043.043.043.043.044.544.545.547.047.048.048.049.050.049.049.050.050.051.052.054.055.055.056.056.057.058.060.060.055.055.056.056.058.058.060.061.065.0
14.017.017.017.017.017.022.022.022.022.025.025.025.025.025.028.528.528.528.528.528.536.036.036.036.036.036.036.046.046.046.046.046.046.046.046.050.050.050.050.050.050.050.050.050.0
14.014.017.014.017.019.014.017.019.022.014.017.019.022.027.014.017.019.022.027.032.014.017.019.022.027.032.036.014.017.019.022.027.032.036.041.014.017.019.022.027.032.036.041.050.0
17.019.019.022.022.022.027.027.027.027.032.032.032.032.032.036.036.036.036.036.036.041.041.041.041.041.041.041.050.050.050.050.050.050.050.050.060.060.060.060.060.060.060.060.060.0
66868
1068
101268
10121568
1012151868
101215182268
10121518222868
10121518222835
81010121212151515151818181818222222222222282828282828283535353535353535424242424242424242
DSRAP-08L-06LDSRAP-10L-06LDSRAP-10L-08LDSRAP-12L-06LDSRAP-12L-08LDSRAP-12L-10LDSRAP-15L-06LDSRAP-15L-08LDSRAP-15L-10LDSRAP-15L-12LDSRAP-18L-06LDSRAP-18L-08LDSRAP-18L-10LDSRAP-18L-12LDSRAP-18L-15LDSRAP-22L-06LDSRAP-22L-08LDSRAP-22L-10LDSRAP-22L-12LDSRAP-22L-15LDSRAP-22L-18LDSRAP-28L-06LDSRAP-28L-08LDSRAP-28L-10LDSRAP-28L-12LDSRAP-28L-15LDSRAP-28L-18LDSRAP-28L-22LDSRAP-35L-06LDSRAP-35L-08LDSRAP-35L-10LDSRAP-35L-12LDSRAP-35L-15LDSRAP-35L-18LDSRAP-35L-22LDSRAP-35L-28LDSRAP-42L-06LDSRAP-42L-08LDSRAP-42L-10LDSRAP-42L-12LDSRAP-42L-15LDSRAP-42L-18LDSRAP-42L-22LDSRAP-42L-28LDSRAP-42L-35L
LLightPN 315
Series Part NumberTube O.D. Dimension (mm)
D2D1 ALhHH1
Swivel Reducing Adaptor
PN 160
DSRAP
Bite Type Tube Fitting for DIN 235334All dimensions in millimeters. Dimensions given approximate length with tightened nut.
28.029.529.530.030.029.533.033.032.532.535.035.034.534.536.039.039.038.538.540.039.543.543.543.043.044.544.044.051.051.050.550.552.051.551.552.056.056.055.555.557.056.556.557.058.5
44.044.044.045.045.046.047.547.548.548.550.050.051.051.054.054.054.055.055.058.058.058.058.059.059.062.062.066.066.066.067.067.070.070.073.076.070.570.571.571.574.574.578.581.585.5
17.017.017.019.019.019.022.022.022.022.024.024.024.024.024.028.528.528.528.528.528.536.036.036.036.036.036.036.041.041.041.041.041.041.041.041.050.050.050.050.050.050.050.050.050.0
17.017.019.017.019.022.017.019.022.024.017.019.022.024.027.017.019.022.024.027.030.017.019.022.024.027.030.036.017.019.022.024.027.030.036.046.017.019.022.024.027.030.036.046.050.0
19.022.022.024.024.024.027.027.027.027.030.030.030.030.030.036.036.036.036.036.036.046.046.046.046.046.046.046.050.050.050.050.050.050.050.050.060.060.060.060.060.060.060.060.060.0
66868
1068
101268
10121468
1012141668
101214162068
10121416202568
10121416202530
81010121212141414141616161616202020202020252525252525253030303030303030383838383838383838
Series Part NumberTube O.D. Dimension (mm)
D2D1 ALhHH1DSRAP- 08S-06SDSRAP-10S-06SDSRAP-10S-08SDSRAP-12S-06SDSRAP-12S-08SDSRAP-12S-10SDSRAP-14S-06SDSRAP-14S-08SDSRAP-14S-10SDSRAP-14S-12SDSRAP-16S-06SDSRAP-16S-08SDSRAP-16S-10SDSRAP-16S-12SDSRAP-16S-14SDSRAP-20S-06SDSRAP-20S-08SDSRAP-20S-10SDSRAP-20S-12SDSRAP-20S-14SDSRAP-20S-16SDSRAP-25S-06SDSRAP-25S-08SDSRAP-25S-10SDSRAP-25S-12SDSRAP-25S-14SDSRAP-25S-16SDSRAP-25S-20SDSRAP-30S-06SDSRAP-30S-08SDSRAP-30S-10SDSRAP-30S-12SDSRAP-30S-14SDSRAP-30S-16SDSRAP-30S-20SDSRAP-30S-25SDSRAP-38S-06SDSRAP-38S-08SDSRAP-38S-10SDSRAP-38S-12SDSRAP-38S-14SDSRAP-38S-16SDSRAP-38S-20SDSRAP-38S-25SDSRAP-38S-30S
SHeavyPN 630
Swivel Reducing Adaptor
PN 400
PN 315
DSRAP
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 35
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DAP-GED/MED (BSP Parallel/Metric Parallel with ED-Ring)Adaptor
BSP Parallel Thread Type
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M20 1.5M22 1.5M24 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
PF 1/8PF 1/4PF 1/4PF 3/8PF 1/2PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2PF 1/4PF 1/4PF 3/8PF 3/8PF 1/2PF 1/2PF 1/2PF 3/4PF 3/4PF 1PF 1 1/4PF 1 1/2
68
101215182228354268
10121214161620253038
14.017.019.022.027.032.036.041.050.060.017.019.022.024.024.027.030.030.036.046.050.060.0
14.019.019.022.027.027.032.041.050.055.019.019.022.022.027.027.027.032.032.041.050.055.0
14.019.019.022.027.027.032.040.050.055.019.019.022.022.027.027.027.032.032.040.050.055.0
24.529.527.534.032.031.532.535.042.546.527.029.532.034.034.536.537.039.043.048.051.060.0
8.012.012.012.014.014.016.018.020.022.012.012.012.012.014.014.014.016.016.018.020.022.0
DAP-06L-01GEDDAP-08L-02GEDDAP-10L-02GEDDAP-12L-03GEDDAP-15L-04GEDDAP-18L-04GEDDAP-22L-06GEDDAP-28L-08GEDDAP-35L-10GEDDAP-42L-12GEDDAP-06S-02GEDDAP-08S-02GEDDAP-10S-03GEDDAP-12S-03GEDDAP-12S-04GEDDAP-14S-04GEDDAP-16S-04GEDDAP-16S-06GEDDAP-20S-06GEDDAP-25S-08GEDDAP-30S-10GEDDAP-38S-12GED
LLightPN315
PN 160
Series Part NumberTubeO.D.(D)
Dimension (mm)
TALIhH T1
SHeavyPB 630
PN 400
PN 315
Metric Parallel Thread Type
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
M10 1.0M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M33 2.0M42 2.0M48 2.0M12 1.5M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M27 2.0M33 2.0M42 2.0M48 2.0
68
101215182228354268
1012141620253038
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
14.017.019.022.024.027.032.041.050.055.017.019.022.024.027.027.032.041.050.055.0
14.017.019.022.024.027.032.040.050.055.017.019.022.024.027.027.032.040.050.055.0
24.526.527.530.531.531.532.535.042.546.527.029.532.034.036.537.043.048.051.060.0
8.012.012.012.014.014.016.018.020.022.012.012.012.012.014.014.016.018.020.022.0
DAP-06L-M10EDDAP-08L-M12EDDAP-10L-M14EDDAP-12L-M16EDDAP-15L-M18EDDAP-18L-M22EDDAP-22L-M26EDDAP-28L-M33EDDAP-35L-M42EDDAP-42L-M48EDDAP-06S-M12EDDAP-08S-M14EDDAP-10S-M16EDDAP-12S-M18EDDAP-14S-M20EDDAP-16S-M22EDDAP-20S-M27EDDAP-25S-M33EDDAP-30S-M42EDDAP-38S-M48ED
LLightPN315
PN 160
Series Part NumberTubeO.D.(D)
Dimension (mm)
TALIhH T1
SHeavyPB 630
PN 400
PN 315
Bite Type Tube Fitting for DIN 235336All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DSAP-GED/MED (BSP Parallel/Metric Parallel with ED-Ring)Swivel Adaptor
BSP Parallel Thread Type
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
PF 1/8PF 1/4PF 1/4PF 3/8PF 1/2PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2PF 1/4PF 1/4PF 3/8PF 3/8PF 1/2PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2
68
101215182228354268
1012141620253038
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
14.019.019.022.027.027.032.041.050.055.019.019.022.022.027.027.032.041.050.055.0
14.019.019.022.027.027.032.040.050.055.019.019.022.022.027.027.032.040.050.055.0
24.529.527.534.032.031.532.535.042.546.527.029.532.034.036.537.043.048.051.060.0
8.012.012.012.014.014.016.018.020.022.012.012.012.012.014.014.016.018.020.022.0
DSAP-06L-01GEDDSAP-08L-02GEDDSAP-10L-02GEDDSAP-12L-03GEDDSAP-15L-04GEDDSAP-18L-04GEDDSAP-22L-06GEDDSAP-28L-08GEDDSAP-35L-10GEDDSAP-42L-12GEDDSAP-06S-02GEDDSAP-08S-02GEDDSAP-10S-03GEDDSAP-12S-03GEDDSAP-14S-04GEDDSAP-16S-04GEDDSAP-20S-06GEDDSAP-25S-08GEDDSAP-30S-10GEDDSAP-38S-12GED
LLightPN315
PN 160
Series Part NumberTubeO.D.(D)
Dimension (mm)
TALIhH T1
SHeavyPB 630
PN 400
PN 315
Metric Parallel Thread Type
M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M45 2.0M52 2.0
M10 1.0M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M33 2.0M42 2.0M48 2.0M12 1.5M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M27 2.0M33 2.0M42 2.0M48 2.0
68
101215182228354268
1012141620253038
14.017.019.022.027.032.036.041.050.060.017.019.022.024.027.030.036.046.050.060.0
14.019.019.022.024.027.032.041.050.055.017.019.022.024.027.027.032.041.050.055.0
14.017.019.022.024.027.032.040.050.055.017.019.022.024.026.027.032.040.050.055.0
24.526.527.530.531.531.532.535.042.546.527.029.532.034.036.537.043.048.051.060.0
8.012.012.012.012.014.016.018.020.022.012.012.012.012.014.014.016.018.020.022.0
DSAP-06L-M10EDDSAP-08L-M12EDDSAP-10L-M14EDDSAP-12L-M16EDDSAP-15L-M18EDDSAP-18L-M22EDDSAP-22L-M26EDDSAP-28L-M33EDDSAP-35L-M42EDDSAP-42L-M48EDDSAP-06S-M12EDDSAP-08S-M14EDDSAP-10S-M16EDDSAP-12S-M18EDDSAP-14S-M20EDDSAP-16S-M22EDDSAP-20S-M27EDDSAP-25S-M33EDDSAP-30S-M42EDDSAP-38S-M48ED
LLightPN315
PN 160
Series Part NumberTubeO.D.(D)
Dimension (mm)
TALIhH T1
SHeavyPB 630
PN 400
PN 315
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 37
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DSLUSwivel Union
36.036.037.037.040.042.547.049.058.059.039.039.043.044.048.050.060.066.073.083.0
34.034.036.036.039.040.545.047.053.053.037.037.041.043.045.046.055.058.062.067.0
17.017.019.022.027.032.036.046.050.060.017.019.022.024.027.030.036.046.050.060.0
68
101215182228354268
1012141620253038
DSLU-06LDSLU-08LDSLU-10LDSLU-12LDSLU-15LDSLU-18LDSLU-22LDSLU-28LDSLU-35LDSLU-42LDSLU-06SDSLU-08SDSLU-10SDSLU-12SDSLU-14SDSLU-16SDSLU-20SDSLU-25SDSLU-30SDSLU-38S
LLightPN500
PB 400
PB 250
Series Part NumberTubeO.D.
Dimension (mm)
L1LH
SHeavyPB 800
PN 400
PN 630
PN 315
Bite Type Tube Fitting for DIN 235338All dimensions in millimeters. Dimensions given approximate length with tightened nut.
For Tube O.D. up to 15mm For Tube O.D. 16mm and larger
BSP Parallel Thread Type
PF 1/8PF 1/4PF 1/4PF 3/8PF 1/2PF 1/2PF 3/4PF 1/4PF 1/4PF 3/8PF 3/8PF 1/2PF 1/2PF 3/4
10.013.013.015.018.021.524.013.013.015.018.018.021.524.0
6.09.09.09.0
11.011.013.09.09.09.09.0
11.011.013.0
10.513.014.015.519.020.525.515.015.016.017.020.021.524.5
21.027.027.032.037.544.049.027.027.032.037.037.044.049.0
25.028.029.030.034.037.042.030.030.032.033.038.040.046.0
14.019.019.022.027.027.032.019.019.022.024.027.027.032.0
14.019.019.022.027.030.036.019.019.022.024.027.030.036.0
14.017.019.022.027.032.036.017.019.022.024.027.030.036.0
14.518.518.522.526.526.032.018.518.522.522.526.526.032.0
68
101215182268
1012141620
DBE-06L-01GDBE-08L-02GDBE-10L-02GDBE-12L-03GDBE-15L-04GDBE-18L-04GDBE-22L-06GDBE-06S-02GDBE-08S-02GDBE-10S-03GDBE-12S-03GDBE-14S-04GDBE-16S-04GDBE-20S-06G
LLightPB 250
PB 160
PB 160
Series Part NumberTubeO.D.
Dimension (mm)
TCBAL1Lh1hHD
SHeavyPB 250
Metric Parallel Thread Type
M10 1.0M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M12 1.5M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M27 2.0
10.012.013.015.018.021.524.012.013.015.018.018.021.524.0
6.09.09.09.09.0
11.013.09.09.09.09.0
11.011.013.0
10.512.014.015.517.520.525.514.015.016.017.020.021.524.5
21.525.027.032.037.544.049.025.027.032.037.037.044.049.0
25.027.029.030.033.037.042.029.030.032.033.038.040.046.0
14.017.019.022.024.027.032.017.019.022.024.027.027.032.0
14.017.019.022.024.030.036.017.019.022.024.027.030.036.0
14.017.019.022.027.032.036.017.019.022.024.027.030.036.0
14.517.519.521.523.527.031.017.519.521.523.525.527.032.0
68
101215182268
1012141620
DBE-06L-M10DBE-08L-M12DBE-10L-M14DBE-12L-M16DBE-15L-M18DBE-18L-M22DBE-22L-M26DBE-06S-M12DBE-08S-M14DBE-10S-M16DBE-12S-M18DBE-14S-M20DBE-16S-M22DBE-20S-M27
LLightPB 250
PB 160
PB 160
Series Part NumberTubeO.D.
Dimension (mm)
TCBAL1Lh1hHD
SHeavyPB 250
DBE-G/M (BSP Parallel/Metric Parallel)Banjo Elbow
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 39
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DHBE-G/M (BSP Parallel/Metric Parallel)High Pressure Banjo Elbow
BSP Parallel Thread Type
PF 1/8PF 1/4PF 1/4PF 3/8PF 1/2PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2PF 1/4PF 1/4PF 3/8PF 3/8PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2
10.514.014.016.521.521.524.030.535.540.514.014.016.516.521.524.030.534.540.5
2.53.03.03.04.54.53.53.53.53.53.03.03.03.04.53.53.53.53.5
8.012.012.012.014.014.016.018.020.022.012.012.012.012.014.016.018.020.022.0
12.014.515.518.021.521.027.532.036.040.516.516.518.518.522.026.531.537.041.5
24.030.030.036.045.045.053.066.076.087.030.030.036.036.045.053.066.076.087.0
27.029.030.033.037.037.044.049.058.063.031.031.035.035.040.048.056.064.072.0
17.019.019.024.030.030.036.046.055.060.019.019.024.024.030.036.046.055.060.0
17.022.022.027.032.032.041.050.060.070.022.022.027.027.032.041.050.060.070.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.030.036.046.050.060.0
14.018.018.022.026.026.032.039.049.055.018.018.022.022.026.032.039.049.055.0
68
101215182228354268
10121620253038
DHBE-06L-01GDHBE-08L-02GDHBE-10L-02GDHBE-12L-03GDHBE-15L-04GDHBE-18L-04GDHBE-22L-06GDHBE-28L-08GDHBE-35L-10GDHBE-42L-12GDHBE-06S-02GDHBE-08S-02GDHBE-10S-03GDHBE-12S-03GDHBE-16S-04GDHBE-20S-06GDHBE-25S-08GDHBE-30S-10GDHBE-38S-12G
LLightPB 315
PB 160
PB 250
Series Part NumberTubeO.D.
Dimension (mm)
TtCBAL1Lh1hHD
SHeavyPB 400
Metric Parallel Thread Type
M10 1.0M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M33 2.0M42 2.0M48 2.0M12 1.5M14 1.5M16 1.5M18 1.5M22 1.5M27 2.0M33 2.0M42 2.0M48 2.0
10.514.014.016.518.521.524.030.535.540.514.014.016.518.521.524.030.535.540.5
2.53.03.03.03.04.53.53.53.53.53.03.03.03.04.53.53.53.53.5
8.012.012.012.012.014.016.018.020.022.012.012.012.012.014.016.018.020.022.0
12.014.515.518.020.521.027.532.036.040.516.516.518.520.022.026.531.537.041.5
24.030.030.036.039.545.053.066.076.087.030.030.036.039.545.053.066.076.087.0
27.029.030.033.036.037.044.049.058.063.031.031.035.036.040.048.056.064.072.0
17.019.019.024.027.030.036.046.055.060.019.019.024.027.030.036.046.055.060.0
17.022.022.027.030.032.041.050.060.070.022.022.027.030.032.041.050.060.070.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.030.036.046.050.060.0
14.017.019.021.023.027.031.039.049.055.017.019.021.023.027.032.039.049.055.0
68
101215182228354268
10121620253038
DHBE-06L-M10DHBE-08L-M12DHBE-10L-M14DHBE-12L-M16DHBE-15L-M18DHBE-18L-M22DHBE-22L-M26DHBE-28L-M33DHBE-35L-M42DHBE-42L-M48DHBE-06S-M12DHBE-08S-M14DHBE-10S-M16DHBE-12S-M18DHBE-16S-M22DHBE-20S-M27DHBE-25S-M33DHBE-30S-M42DHBE-38S-M48
LLightPB 315
PB 160
PB 160
Series Part NumberTubeO.D.
Dimension (mm)
TtCBAL1Lh1hHD
SHeavyPB 400
Bite Type Tube Fitting for DIN 235340All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DHBT-G/M (BSP Parallel/Metric Parallel)High Pressure Banjo Tee
Metric Parallel Thread Type
M10 1.0M12 1.5 M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M33 2.0M42 2.0M48 2.0M12 1.5M14 1.5M16 1.5M18 1.5M22 1.5M27 2.0M33 2.0M42 2.0M48 2.0
10.514.014.016.518.521.524.030.535.540.514.014.016.518.521.524.030.535.540.5
2.53.03.03.03.04.53.53.53.53.53.03.03.03.04.53.53.53.53.5
8.012.012.012.012.014.016.018.020.022.012.012.012.012.014.016.018.020.022.0
12.014.515.518.020.521.027.532.036.040.516.516.518.520.022.026.531.537.041.5
24.030.030.036.039.545.053.066.076.087.030.030.036.039.545.053.066.076.087.0
27.029.030.033.036.037.044.049.058.063.031.031.035.036.040.048.056.064.072.0
17.019.019.024.027.030.036.046.055.060.019.019.024.027.030.036.046.055.060.0
17.022.022.027.030.032.041.050.060.070.022.022.027.030.032.041.050.060.070.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.030.036.046.050.060.0
14.017.019.021.023.027.031.039.049.055.017.019.021.023.027.032.039.049.055.0
68
101215182228354268
10121620253038
DHBT-06L-M10DHBT-08L-M12DHBT-10L-M14DHBT-12L-M16DHBT-15L-M18DHBT-18L-M22DHBT-22L-M26DHBT-28L-M33DHBT-35L-M42DHBT-42L-M48DHBT-06S-M12DHBT-08S-M14DHBT-10S-M16DHBT-12S-M18DHBT-16S-M22DHBT-20S-M27DHBT-25S-M33DHBT-30S-M42DHBT-38S-M48
LLightPB 315
PB 160
PB 250
Series Part NumberTubeO.D.
Dimension (mm)
TtCBAL1Lh1hHD
SHeavyPB 400
BSP Parallel Thread Type
PF 1/8PF 1/4PF 1/4PF 3/8PF 1/2PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2PF 1/4PF 1/4PF 3/8PF 3/8PF 1/2PF 3/4PF 1PF 1 1/4PF 1 1/2
10.514.014.016.521.521.524.030.535.540.514.014.016.516.521.524.030.535.540.5
2.53.03.03.04.54.53.53.53.53.53.03.03.03.04.53.53.53.53.5
8.012.012.012.014.014.016.018.020.022.012.012.012.012.014.016.018.020.022.0
12.014.515.518.021.521.027.532.036.040.516.516.518.518.522.026.531.537.041.5
24.030.030.036.045.045.053.066.076.087.030.030.036.036.045.053.066.076.087.0
27.029.030.033.037.037.044.049.058.063.031.031.035.035.040.048.056.064.072.0
17.019.019.024.030.030.036.046.055.060.019.019.024.024.030.036.046.055.060.0
17.022.022.027.032.032.041.050.060.070.022.022.027.027.032.041.050.060.070.0
14.017.019.022.027.032.036.041.050.060.017.019.022.024.030.036.046.050.060.0
14.018.018.022.026.026.032.039.049.055.018.018.022.022.026.032.039.049.055.0
68
101215182228354268
10121620253038
DHBT-06L-01GDHBT-08L-02GDHBT-10L-02GDHBT-12L-03GDHBT-15L-04GDHBT-18L-04GDHBT-22L-06GDHBT-28L-08GDHBT-35L-10GDHBT-42L-12GDHBT-06S-02GDHBT-08S-02GDHBT-10S-03GDHBT-12S-03GDHBT-16S-04GDHBT-20S-06GDHBT-25S-08GDHBT-30S-10GDHBT-38S-12G
LLightPB 315
PB 160
PB 250
Series Part NumberTubeO.D.
Dimension (mm)
TtCBAL1Lh1hHD
SHeavyPB 400
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 41
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
PF 1/4PF 1/4PF 1/4PF 1/4PF 1/2PF 1/2PF 1/2PF 1/2
2.55.55.55.53.53.57.07.0
14.017.019.022.017.019.022.024.0
19.019.019.019.027.027.027.027.0
37.037.038.038.046.046.047.047.0
7.57.58.58.511.011.010.510.5
14.514.514.514.520.020.020.020.0
4.54.54.54.55.05.05.05.0
68
101268
1012
DFGC-06L-02GDFGC-08L-02GDFGC-10L-02GDFGC-12L-02GDFGC-06S-04GDFGC-08S-04GDFGC-10S-04GDFGC-12S-04G
LLightPN 315
Series Part NumberTubeO.D.
Dimension (mm)
CBALhHd T
DFGC-G (BSP Parallel)Pressure Gauge Connector
SHeavyPN 630
PF 1/4PF 1/4PF 1/4PF 1/4PF 1/4PF 1/4PF 1/4PF 1/4PF 1/2PF 1/2PF 1/2PF 1/2
2.54.05.55.52.54.06.07.02.54.06.07.0
14.017.019.022.017.019.022.024.017.019.022.024.0
19.019.019.019.019.019.019.019.027.027.027.027.0
35.535.536.036.035.535.536.039.042.543.043.545.0
14.514.514.514.514.514.514.514.520.020.020.020.0
4.54.54.54.54.54.54.54.55.05.05.05.0
68
101268
1012681012
DSGC-06L-02GDSGC-08L-02GDSGC-10L-02GDSGC-12L-02GDSGC-06S-02GDSGC-08S-02GDSGC-10S-02GDSGC-12S-02GDSGC-06S-04GDSGC-08S-04GDSGC-10S-04GDSGC-12S-04G
LLightPN 315
Series Part NumberTubeO.D.
Dimension (mm)
CBLhHd T
Series Part NumberTubeO.D.
Dimension (mm)
CBLhHd T
DSGC-G (BSP Parallel)Pressure Gauge Swivel Connector
SHeavyPN 630
PF 1/4PF 1/4PF 1/4PF 1/4PF 1/2PF 1/2PF 1/2PF 1/2
3.55.57.59.03.54.56.57.5
14.017.019.022.017.019.022.024.0
19.019.019.019.027.027.027.027.0
38.038.039.540.545.045.047.047.5
14.514.514.514.520.020.020.020.0
4.54.54.54.55.05.05.05.0
681012681012
DGAP-06L-02GDGAP-08L-02GDGAP-10L-02GDGAP-12L-02GDGAP-06S-04GDGAP-08S-04GDGAP-10S-04GDGAP-12S-04G
LLightPN 315
DGAP-G (BSP Parallel)Gauge Adaptor
SHeavyPN 630
Bite Type Tube Fitting for DIN 235342All dimensions in millimeters. Dimensions given approximate length with tightened nut.
81012148121212
4141414141414141
1418222614171921
1719222717171922
PF 1/8PF 1/4PF 3/8PF 1/2
M10 1.0M12 1.5M14 1.5M16 1.5
DTC 3-01GDTC 3-02GDTC 3-03GDTC 3-04GDTC 3-M10DTC 3-M12DTC 3-M14DTC 3-M16
PB 630
DTCTest Coupling
1417192227323641506017192224273036465060
2424242430323641465524242424273036414655
5050525255566061697054545656626269758190
20.520.522.522.524.523.527.527.525.524.524.524.523.523.526.525.525.526.527.529
5050505053545658616550505050515356586165
681012151822283542681012141620253038
DTPC 3-06LDTPC 3-08LDTPC 3-10LDTPC 3-12LDTPC 3-15LDTPC 3-18LDTPC 3-22LDTPC 3-28LDTPC 3-35LDTPC 3-42LDTPC 3-06SDTPC 3-08SDTPC 3-10SDTPC 3-12SDTPC 3-14SDTPC 3-16SDTPC 3-20SDTPC 3-25SDTPC 3-30SDTPC 3-38S
LLightPN 315
Series Part NumberTubeO.D.
Dimension (mm)
SALhH
Series Part NumberDimension (mm)
TASDh
DTPCTee Test Point Connector
PB 160
SHeavyPN 630
PN 400
PN 315
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 43
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
1012141619222732404611131517192126313644
1417192227323641506017192224273036465060
1214171922273241465514171922242732414655
2931333337404547545834363941454551566269
1416181822
23.528.530.532.5351921
22.524.527
26.529.532
35.538
681012151822283542681012141620253038
DWC - 06LDWC - 08LDWC - 10LDWC - 12LDWC - 15LDWC - 18LDWC - 22LDWC - 28LDWC - 35LDWC - 42LDWC - 06SDWC - 08SDWC - 10SDWC - 12SDWC - 14SDWC - 16SDWC - 20SDWC - 25SDWC - 30SDWC - 38S
LLightPN 315
�
DWCWelding Connector
PB 160
SHeavyPN 630
PN 400
PN 315
876987
13121110161514121917152422201830282624
22
24
30
36
46
50
60
19
22
27
32
41
46
55
58
65
74.5
84
94.5
102
111
10
15
16.5
19
19.5
23
23
10
12
16
20
25
30
38
DAWC-10 1.0DAWC-10 1.5DAWC-10 2.0DAWC-12 1.5DAWC-12 2.0DAWC-12 2.5DAWC-16 1.5DAWC-16 2.0DAWC-16 2.5DAWC-16 3.0DAWC-20 2.0DAWC-20 2.5DAWC-20 3.0DAWC-20 4.0DAWC-25 3.0DAWC-25 4.0DAWC-25 5.0DAWC-30 3.0DAWC-30 4.0DAWC-30 5.0DAWC-30 6.0DAWC-38 4.0 DAWC-38 5.0 DAWC-38 6.0DAWC-38 7.0
PB248PB357PB458PB303PB391PB474PB234PB303PB370PB433PB249PB305PB357PB458PB292PB378PB458PB248PB321PB391PB460PB260PB318PB373PB427
DAWCWelding Connector with DWN
Series Part NumberTubeO.D.
Dimension (mm)
ALhHD
Series SMAX. Pressure
Part NumberTube O.D.
D
Dimension (mm)
ALhHd
Bite Type Tube Fitting for DIN 235344All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DWN-10 1.0DWN-10 1.5DWN-10 2.0DWN-12 1.5DWN-12 2.0DWN-12 2.5DWN-16 1.5DWN-16 2.0DWN-16 2.5DWN-16 3.0DWN-20 2.0DWN-20 2.5DWN-20 3.0DWN-20 4.0DWN-25 3.0DWN-25 4.0DWN-25 5.0DWN-30 3.0DWN-30 4.0DWN-30 5.0DWN-30 6.0DWN-38 4.0DWN-38 5.0DWN-38 6.0DWN-38 7.0
10
12
16
20
25
30
38
876987
13121110161514121917152422201830282624
35.5
35.5
42.5
47.5
55
58.5
66
33
33
39
43.5
49.5
51.5
56.5
PB 248PB 357PB 458PB 303PB 391PB 474PB 234PB 303PB 370PB 433PB 249PB 303PB 357PB 458PB 292PB 378PB 458PB 248PB 321PB 391PB 460PB 260PB 318PB 373PB 427
PN630
PN630
PN400
PN400
PN400
PN400
PN315
Pressure RatingPart Number
Dimension (mm)
d L A
DWNWelding Nipple
10101212162020252530303038383838
68810121216162016202516202530
34477710101212151912151922
5-6-------------
37.537.537.537.546.551.553.556.559.567707079828282
3535353543
47.549.55154606363
69.572.572.572.5
12121414151517172017202017202020
DRWN-10- 6 1.5DRWN-10- 8 2.0DRWN-12- 8 2.0DRWN-12-10 1.5DRWN-16-12 2.5DRWN-20-12 2.5DRWN-20-16 3.0DRWN-25-16 3.0DRWN-25-20 4.0DRWN-30-16 2.0DRWN-30-20 2.5DRWN-30-25 3.0DRWN-38-16 2.0DRWN-38-20 2.5DRWN-38-25 3.0DRWN-38-30 4.0
PB 526PB 526 PB 526 PB 357PB 474 PB 474 PB 433 PB 433 PB 458 PB 303 PB 303 PB 292 PB 303 PB 303 PB 292 PB 321
PN630
Fitting
Pressure Rating Tube O.D. Dimension (mm)Part Number
D1 D2 d1 d2 L1 L A
DRWNReducing Welding
Fittings DWN and TubeTUBE O.D.
D
DRWN and Tube
PN400
PN315
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 45
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
22272732324141415050555555
22262632323939394949555555
22.5242426262929293232363636
12141416161818182020222222
881212121212141416141618
PF 3/8PF 1/2PF 1/2PF 3/4PF 3/4PF1PF1PF1
PF 1 1/4PF 1 1/4PF 1 1/2PF 1 1/2PF 1 1/2
PF 1/8PF 1/8PF 1/4PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF1
DMFC-03G-01GDMFC-04G-01GDMFC-04G-02GDMFC-06G-02GDMFC-06G-03GDMFC-08G-02GDMFC-08G-03GDMFC-08G-04GDMFC-10G-04GDMFC-10G-06GDMFC-12G-04GDMFC-12G-06GDMFC-12G-08G
PB 630PB 630PB 400
PB 400
PB 400
PB 250
PB 250
Series Part NumberDimension (mm)
H D L A B T T1
DMFCMale Female Connector
192419243036223036273641553241556041556050605570
445555888121212101616161620202025253240
141418181818222222262626263232323239393949495568
313228364043364144364649534151555747575952605862
8812121212121212141414141616161618181820202224
1717121720221720221722
24.526.520
24.526.528.522
26.528.524.528.526.528.5
PF 1/8PF 1/8PF 1/4PF 1/4PF 1/4PF 1/4PF 3/8PF 3/8PF 3/8PF 1/2PF 1/2PF 1/2PF 1/2PF 3/4PF 3/4PF 3/4PF 3/4PF 1PF 1PF 1
PF 1 1/4PF 1 1/4PF 1 1/2
PF 2
PF 1/4PF 3/8PF 1/8PF 3/8PF 1/2PF 3/4PF 1/4PF 1/2PF 3/4PF 3/8PF 3/4PF 1
PF 1 1/4PF 1/2PF 1
PF 1 1/4PF 1 1/2PF 3/4
PF 1 1/4PF 1 1/2
PF 1PF 1 1/2PF 1 1/4PF 1 1/2
DMFG-01G-02GDMFG-01G-03GDMFG-02G-01GDMFG-02G-03GDMFG-02G-04GDMFG-02G-06GDMFG-03G-02GDMFG-03G-04GDMFG-03G-06GDMFG-04G-03GDMFG-04G-06GDMFG-04G-08GDMFG-04G-10GDMFG-06G-04GDMFG-06G-08GDMFG-06G-10GDMFG-06G-12GDMFG-08G-06GDMFG-08G-10GDMFG-08G-12GDMFG-10G-08GDMFG-10G-12GDMFG-12G-10GDMFG-16G-12G
Series Part NumberDimension (mm)
dH D L A B T T1
DMFGMale Female Gauge Connector
PB 630
PB 400
PB 630
PB 250
PB 400
PB 250
PB 400
PB 250PB 400
PB 250
BSP Parallel Thread Type
BSP Parallel Thread Type
Bite Type Tube Fitting for DIN 235346All dimensions in millimeters. Dimensions given approximate length with tightened nut.
PB 630PB 630PB 400
PB 400
PB 400
PB 250
PB 250
PB 630
PB450
PB630
PB400
PB400
PB250
PB400
PB250PB400
PB250
22272732324141415050555555
22262632323939394949555555
22.5242426262929293232363636
12141416161818182020222222
881212121212141416141618
PF 3/8PF 1/2PF 1/2PF 3/4PF 3/4PF1PF1PF1
PF 1 1/4PF 1 1/4PF 1 1/2PF 1 1/2PF 1 1/2
PF 1/8PF 1/8PF 1/4PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF1
DMFC-03ED-01GDMFC-04ED-01GDMFC-04ED-02GDMFC-06ED-02GDMFC-06ED-03GDMFC-08ED-02GDMFC-08ED-03GDMFC-08ED-04GDMFC-10ED-04GDMFC-10ED-06GDMFC-12ED-04GDMFC-12ED-06GDMFC-12ED-08G
DMFC-EDMale Female Connector with ED-Ring
192419243036223036273641553241556041556050605570
445555888121212101616161620202025253240
141418181818222222262626263232323239393949495568
313228364043364144364649534151555747575952605862
8812121212121212141414141616161618181820202224
1717121720221720221722
24.526.520
24.526.528.522
26.528.524.528.526.528.5
PF 1/8PF 1/8PF 1/4PF 1/4PF 1/4PF 1/4PF 3/8PF 3/8PF 3/8PF 1/2PF 1/2PF 1/2PF 1/2PF 3/4PF 3/4PF 3/4PF 3/4PF 1PF 1PF 1
PF 1 1/4PF 1 1/4PF 1 1/2
PF 2
PF 1/4PF 3/8PF 1/8PF 3/8PF 1/2PF 3/4PF 1/4PF 1/2PF 3/4PF 3/8PF 3/4PF 1
PF 1 1/4PF 1/2PF 1
PF 1 1/4PF 1 1/2PF 3/4
PF 1 1/4PF 1 1/2
PF 1PF 1 1/2PF 1 1/4PF 1 1/2
DMFG-01ED-02GDMFG-01ED-03GDMFG-02ED-01GDMFG-02ED-03GDMFG-02ED-04GDMFG-02ED-06GDMFG-03ED-02GDMFG-03ED-04GDMFG-03ED-06GDMFG-04ED-03GDMFG-04ED-06GDMFG-04ED-08GDMFG-04ED-10GDMFG-06ED-04GDMFG-06ED-08GDMFG-06ED-10GDMFG-06ED-12GDMFG-08ED-06GDMFG-08ED-10GDMFG-08ED-12GDMFG-10ED-08GDMFG-10ED-12GDMFG-12ED-10GDMFG-16ED-12G
DMFG-EDMale Female Gauge Connector with ED-Ring
BSP Parallel Thread Type
Series Part NumberDimension (mm)
H D L A B T T1
BSP Parallel Thread Type
Series Part NumberDimension (mm)
dH D L A B T T1
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 47
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DCTube Cap
DPPlug
68
101215182228354268
1012141620253038
1417192227323641506017192224273036465060
1214171924273241465514171922242732414655
2223242526283031363926282931343439444754
7.08.09.0
10.011.011.513.514.514.516.011.013.012.514.516.015.517.520.020.523.0
DC-06L DC-08LDC-10LDC-12LDC-15LDC-18LDC-22LDC-28LDC-35LDC-42LDC-06SDC-08SDC-10SDC-12SDC-14SDC-16SDC-20SDC-25SDC-30SDC-38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
H h L A
681012151822283542
14
1620253038
681012151822283542
14
1620253038
18.518.520
20.520.522.525
25.53030
22.5
23.528.529
30.533
DP-06LS DP-08LSDP-10LSDP-12LSDP-15LDP-18LDP-22LDP-28LDP-35LDP-42L
DP-14S
DP-16SDP-20SDP-25SDP-30SDP-38S
LLightPN 315
PN 160
SHeavyPN 630
PN 400
PN 315
Series Part NumberTubeO.D.
Dimension (mm)
D L
Bite Type Tube Fitting for DIN 235348All dimensions in millimeters. Dimensions given approximate length with tightened nut.
DBP-GED/MED(BSP Parallel/Metric Parallel)Blanking Plugs for Port with ED-Ring
DBP-M (Metric Parallel)Blanking Plugs with O-Ring(accord.to ISO 6149-3/DIN 3582)
81212121214141616161616
12.017.017.017.017.019.019.021.021.022.522.522.5
5668810101212172224
14.017.019.022.023.925.927.031.932.039.949.955.0
1/8-
1/43/8--
1/2-
3/41
1 1/4 1 1/2
M10 1.0M12 1.5M14 1.5M16 1.5M18 1.5M20 1.5M22 1.5M26 1.5M27 2.0M33 2.0M42 2.0M48 2.0
DBP-01GED-
DBP-02GEDDBP-03GED
--
DBP-04GED-
DBP-06GEDDBP-08GEDDBP-10GEDDBP-12GED
DBP-M10EDDBP-M12EDDBP-M14EDDBP-M16EDDBP-M18EDDBP-M20EDDBP-M22EDDBP-M26EDDBP-M27EDDBP-M33EDDBP-M42EDDBP-M48ED
PB 400
Series Part Number(M) Part Number(G)Dimension (mm)
M(Metric) G(PF) D H L A
T
PB 250
13171921232731323848
566681012121722
1416.516.518
19.520.52124
25.526
1011.511.513
14.515.5161919
19.5
M10 1M12 1.5M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M27 2M33 2M42 2
DBP-M10DBP-M12DBP-M14DBP-M16DBP-M18DBP-M22DBP-M26DBP-M27DBP-M33DBP-M42
PB 630
Series Part NumberT
M(Metric)
Dimension (mm)
D H L A
PB 400
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 49
All dimensions in millimeters. Dimensions given approximate length with tightened nut.
Tube end Dimension
34.56810468101215192430364578101216202532
10121417191417192227323641506017192224273036465060
11.512
12.512.51315151616
17.518
20.5212424
16.516.517.518
20.5212427
29.532.5
45.55.56677777
7.57.57.510.51177
7.57.58
8.510.512
13.516
889991010111112121414161612121212141416182022
4681012681012151822283542681012141620253038
57.59.5
11.513.58.1
10.112.314.317.320.324.330.338458.1
10.112.314.316.318.322.927.93341
346810468101216202532403468101216202532
M8 1.0M10 1.0M12 1.0M14 1.0M16 1.0M12 1.5M14 1.5M16 1.5M18 1.5M22 1.5M26 1.5M30 2.0M36 2.0M45 2.0M52 2.0M14 1.5M16 1.6M18 1.5M20 1.5M22 1.5M24 1.5M30 2.0M36 2.0M42 2.0M52 2.0
DCR-04LLDCR-06LLDCR-08LLDCR-10LLDCR-12LLDCR-06DCR-08DCR-10DCR-12DCR-15DCR-18DCR-22DCR-28DCR-35DCR-42DCR-06DCR-08DCR-10DCR-12DCR-14DCR-16DCR-20DCR-25DCR-30DCR-38
DNT-04LLDNT-06LLDNT-08LLDNT-10LLDNT-12LLDNT-06LDNT-08LDNT-10LDNT-12LDNT-15LDNT-18LDNT-22LDNT-28LDNT-35LDNT-42LDNT-06SDNT-08SDNT-10SDNT-12SDNT-14SDNT-16SDNT-20SDNT-25SDNT-30SDNT-38S
LLVeryLight
SeriesNut
Part NumberCutting RingPart Number
Dimension (mm)
D D1 H L I I1d M
DNSize
4681012681012151822283542681012141620253038
TubeO.D
DCRCutting Ring
DEDED-Ring
DORO-Ring
LLight
SHeavy
Part Number For Male ThreadDED- M8DED-M10DED-M12DED-M14DED-M16DED-03GDED-M18DED-M20DED-04GDED-M22DED-M26DED-M27DED-M33DED-M42DED-M48
M8 1.0M10 1.0M12 1.5M14 1.5M16 1.5
-M18 1.5M20 1.5
-M22 1.5M26 1.5M27 2.0M33 2.0M42 2.0M48 2.0
-PF 1/8
-PF 1/4
-PF 3/8
--
PF 1/2--
PF 3/4
PF 1PF 1 1/4PF 1 1/2
Part Number dDOR-4DOR-6
DOR-7.5DOR-9DOR-10DOR-12DOR-15
DOR-16.3DOR-20
DOR-20.3DOR-25.3DOR-26DOR-32
DOR-33.3DOR-38
46
7.59101215
16.320
20.325.32632
33.338
1.51.51.51.52.02.02.02.42
2.42.42
2.52.42.5
t
DNTNUT M
Bite Type Tube Fitting for DIN 235350
Certificates
ABS 06-BK152666-PDA API-SpecQ1 DNV P-12317
GL - BITE TYPE ISO 9001 LR 06-10006
Bite Type Tube Fitting for DIN 2353
Bite Type Tube Fitting for DIN 2353 51
SUPERLOK TUBE FITTINGS BITE TYPE TUBE FITTINGS INSTRUMENT THREAD FITTINGS BALL VALVE 120 SERIES
BALL VALVE 210 SERIES BALL VALVE 360 SERIES PLUG VALVES MANIFOLD VALVES
INTEGRAL BONNET NEEDLE VALVES UNION BONNET NEEDLE VALVES CHECK VALVES SWING-OUT BALL VALVES
TOGGLE VALVES QUICK CONNECTS DOUBLE BLOCK&BLEED VALVES VACUUM CLAMP
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 9000 psig @100 F(38 C)OPERATING TEMPERATURE RANGE: -325 F(-198 C) TO 1200 F(648 C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 100~630 barg @100 °F(38°C)OPERATING TEMPERATURE RANGE: 800 °F(427°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 10000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -325 °F(-198°C) TO 1200 °F(648°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 2500 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: 50 °F(10°C) TO 150 °F(65°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 1000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 450 °F(232°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 10000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -22 °F(-30°C) TO 265 °F(130°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 3000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -10 °F(-23°C) TO 400 °F(204°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 6000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 450 °F(232°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 5000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 450 °F(232°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 6000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 1200 °F(648°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 3000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -10 °F(-23°C) TO 375 °F(191°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 3000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -20 °F(-28°C) TO 450 °F(232°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 300 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -20 °F(-28°C) TO 200 °F(93°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 3000 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: -10 °F(-23°C) TO 400 °F(204°C)
SPECIFICATIONSMAXIMUM OPERATING PRESSURE: CLASS2500 (6000 psig) @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 400 °F(204°C) WITH PEEK SEAT