1200mm light bar user data - storage.googleapis.com · dmx channels 1 - 4 owersp 4 x lu12800 led...
TRANSCRIPT
1200mm Light Bar User Data
Tel: +44 (0) 116 278 8078Email: [email protected]: www.abstractavr.com
User Data - SpecificationsDate: 01/11/2016
Page 1/4
Product Code:LUS1200-OP-RGBW
RGBW(White 5000k)
4 Channel
3,700lm/M at source
57.6W per lamp
48VF Forward Voltage
350mA CC Input
25º x 8º standard optics
8º / 25º / 40ºoptic lens options
IP40
Ingress Protection
RJ45connectivity
Aluminium Housing
1216 x 47 x 30mm(L) x (W) x (D)
-10ºc / +40ºcOperating Temp
Cooling System:Convection
Product Code:LUS1200-OP-TW
Tuneable White (592nm - 6500k)
4 Channel
4,020lm/M at source
57.6W per lamp
48VF Forward Voltage
350mA CC Input
25º x 8º standard optics
8º / 25º / 40ºoptic lens options
IP40
Ingress Protection
RJ45connectivity
Aluminium Housing
1216 x 47 x 30mm(L) x (W) x (D)
-10ºc / +40ºcOperating Temp
Cooling System:Convection
Product Code:LUS1200-OP-S
Single Colour (R,G,B,A,W)
1 Channel
-
57.6W per lamp
48VF Forward Voltage
350mA CC Input
25º x 8º standard optics
8º / 25º / 40ºoptic lens options
IP40
Ingress Protection
RJ45connectivity
Aluminium Housing
1216 x 47 x 30mm(L) x (W) x (D)
-10ºc / +40ºcOperating Temp
Cooling System:Convection
Product Code:LUS1200-OP-RGBA
RGBA(Amber 590nm)
4 Channel
2,890lm/M at source
57.6W per lamp
48VF Forward Voltage
350mA CC Input
25º x 8º standard optics
8º / 25º / 40ºoptic lens options
IP40
Ingress Protection
RJ45connectivity
Aluminium Housing
1216 x 47 x 30mm(L) x (W) x (D)
-10ºc / +40ºcOperating Temp
Cooling System:Convection
1200mm Light Bar User Data
Tel: +44 (0) 116 278 8078Email: [email protected]: www.abstractavr.com
User Data - SpecificationsDate: 01/11/2016
Page 2/4
Fixing BracketsSupplied with all LUS’s
More Options
Accessories
Compatible Drivers
Product Code:LUD48-D
Product Code:LUD192-D
Powers 1 x LUS1200
LED Outputs1
Max per Output 1 x LU12800
DMX Channels1 - 4
Powers 4 x LU12800
LED Outputs4
Max per Output1 x LU12800
DMX Channels1 - 16
Non-Optic FloodOptional
Product Code:exclude -OP
1216 x 47 x 20mm(L) x (W) x (D)
IP65 HousingOptional Accessory
Product Code Suffix:LUSX-X-X-IP
1260mm x 60ØmmDimensions
Tel: +44 (0) 116 278 8078Email: [email protected]: www.abstractavr.com
User Data - DimensionsDate: 01/11/2016
Page 3/4
1200mm Light Bar User DataOptic Dimensions
Non-Optic Dimensions
Tel: +44 (0) 116 278 8078Email: [email protected]: www.abstractavr.com
User Data - RJ45 WiringDate: 01/11/2016
Page 4/4
RJ45 System Wiring
In-line Connector
RJ45 Patch Lead
RJ45 DMX Driver
RJ45 Light FittingT-Piece Connector
1.5M CAT5
RJ45 Plug WiringPin Function Wire1 - Red + Orange / White2 - Green + Orange3 - Blue + Green / White4 - White + Blue5 - Red - Blue / White6 - Green - Green7 - Blue - Brown / White8 - White - Brown
All work involving electrical components should be carried out by a competent qualified electrical professional in accordance to IET BS 7671 and any local by-laws.
All mains power MUST be turned off before starting installation or maintenance; and MUST remain off for the duration of installation or main-tenance.
Equipment may become hot to the touch when used for periods of time. Ensure equipment is off and cooled before carrying out maintenance.
DO NOT connect or disconnect light fittings while mains power is connected. All RJ45 connections MUST be made before mains power is connect-ed. Failure to do so may result in catastrophic failure of the LED.
You can install any combination of RJ45 fittings from a single ‘LED’ output on the Driver, ensuring the total combined forward voltage of the fittings connected to any single ‘LED’ output DOES NOT EXCEED 48V and is NO LESS THAN 8V.
TESTINGYou should test each fitting in isolation before continuing installation.
1. Disconnect the Driver from mains power.
2. Connect RJ45 light fitting to the ‘LED’ socket of the Driver in isolation.
3. Power up the Driver.
4. Press ‘ENT’ continuously to select RED, GREEN, BLUE and WHITE.
5. Repeat steps 1 to 4, for each fitting.
If each fitting lights up and displays each colour you can continue with your installation.
If a fitting does not light up or display each colour please contact us for help. Do not continue your installation.
INSTALLATIONEnsure you have carried out the testing before installation.
1. Disconnect the Driver from mains power.
2. Using a RJ45 patch lead connect from ‘LED’ socket of the Driver to ‘IN’ socket of T-Piece.
3. Connect the RJ45 of fitting to ‘LED’ socket of T-Piece (1x ‘LED’ socket, 1x ‘IN’ socket, 1x ‘OUT’ socket).
4. Connect a RJ45 patch lead from ‘OUT’ socket of T-Piece to ‘IN’ socket of next T-Piece.
5. Repeat steps 3. and 4 for each fitting, ensuring you do not exceed a total forward voltage of 48V to each ‘LED’ output of the Driver.
6. The last fitting should be terminated with an In-line connector in place of the last T-Piece. (1x ‘IN’ socket, 1x ‘OUT’ socket).
IMPORTANT
WARNING! Example diagram only. Please read this section carefully before any installation work is carried out. All work should be carried out as per our instructions. Failure to do so may void any warranty. These instruction are to be used in addition to the Driver manuals.