Horticulture Equipment

Plant: Blue Spruce

Term: Shovel

Blue SprucePicea pungens

• Plant type: Evergreen Tree • USDA Hardiness Zones: 3a to 7b • Height: 35 – 60 ft, Spread: 15 – 25 ft • Exposure: partial shade to full sun

As a Christmas Tree needs full sun • Leaf Color: Blue, Silvery • Growth Rate: average • Form: Columnar, Pyramidal• Uses: Specimen, windbreak• Very prickly when used as a Christmas tree

• Shovel – used for cleaning loose soil from planting holes and other scooping uses. A shovel has sides

• A spade does not

• Spading shovel – a combination tool that can be used for both digging as well as scooping

Shovels

Digging tools

• Spades – are flatter than shovels. They penetrate the soil better but have less scooping capability

• May have a flat edge for borders or a curved edge for digging holes for plantings

• May be narrow for trenches

Digging tools

• Garden or spading fork – used for turning over soil that is not compacted, digging bulbs and potatoes, and weeding

• Scoop – used for moving loose materials such as crushed stone or peat moss

Digging tools

• Hand trowel – used for transplanting bedding flowers.

• Post hole digger – digs deep narrow holes for posts

• Bulb planter

Name that tool

Name that tool

Name that tool

Name that tool

Name that tool

Name that tool

Name that tool

Name that tree

Name that tree

Name that tree

Sharpening Tools

Sharpening Cutting Tools

• Saws• Chain Saw – Round Files• Most saws need professional sharpening• Off-set teeth• Sharpen Cutting Edge

Sharpen Pruners & Loppers

• Anvil– Sharpen both sides of cutting blade– Not the anvil side

• Bypass– Sharpen one side only

Sharpening Pruners

• 1. Take apart• Remember which side the washer was on

Sharpening Pruners

• Determine cutting edge• Sharpen with a stone & oil or a sharpening

tool

Clean with solvent

• Turpentine, kerosene, or adhesive remover will clean off sap from blades and handles

• Remove all rust with steel wool– Not soap pads

• Oil all parts

Reassemble

• Make sure blades align• Pay attention to the shapes of the washers

and bolts

Check

• Make sure there is not gap when the pruners are closed