1/05 welding, cutting, and brazing. 2 notice this presentation is provided to all educational...
TRANSCRIPT
![Page 1: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/1.jpg)
1/05
Welding, Cutting, and
Brazing
QuickTime™ and aGIF decompressor
are needed to see this picture.
![Page 2: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/2.jpg)
2
Notice
This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost.
This presentation contains copyrighted materials purchased by ESD 101 for the exclusive use of training school personnel within ESD 101.
This presentation may not be reproduced except to print “handouts” or “notes pages” for use during training within ESD 101 school districts.
If the school district does not have Microsoft’s PowerPoint software available, a PowerPoint viewer can be downloaded from the internet at no cost.
Questions may be directed to the ESD 101 Risk Manager.
![Page 3: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/3.jpg)
3
Welding Safety Program Guidelines
Determine who is accountable for enforcement of welding operations
Hot work permitting system
Perform a job hazard assessment of welding equipment
![Page 4: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/4.jpg)
4
Welding Safety Program Guidelines
Special procedures for equipment used in welding process•Care of cylinders•Ventilation systems•Fire prevention
![Page 5: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/5.jpg)
5
Welding Safety Program Guidelines
Engineering controls Administrative controls Personal protective equipment Equipment inspection and maintenance Incident investigation
![Page 6: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/6.jpg)
6
Damage to eyes and skin•Ultraviolet (UV) rays• Infrared rays
Purging and cleaning of closed containers prior to welding operations
Welding Hazards
![Page 7: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/7.jpg)
7
Welding Hazards
Toxic gases, fumes, and dusts
Fire hazards from welding and cutting operations
![Page 8: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/8.jpg)
8
Welding Hazards
Metal splatter
Electric shock
Explosion hazards
![Page 9: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/9.jpg)
9
Use a platform with toeboards when working from elevated surfaces
Protect workers from stray sparks or slag in areas below elevated work surfaces
General Safe Work Practices
![Page 10: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/10.jpg)
10
Warn others of hot metal by marking work areas
Keep floor areas clear of electrodes and/or electrode stubs
General Safe Work Practices
![Page 11: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/11.jpg)
11
Never use bare conductors, damaged regulators, torches, or electrode holders
Never arc weld or resist weld while standing on damp surfaces
General Safe Work Practices
![Page 12: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/12.jpg)
12
Keep fire extinguishers near areas where hot work is performed
General Safe Work Practices
![Page 13: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/13.jpg)
13
Compressed Gas Cylinder Handling and Storage
Never accept compressed gas cylinders (CGCs) that were shipped in a horizontal position
Store CGCs upright
Keep CGCs secured with chains or cables
![Page 14: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/14.jpg)
14
Compressed Gas Cylinder Handling and Storage
Group cylinders by type of gas
Store full and empty cylinders apart
Store gases so that old stock is removed and used first
![Page 15: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/15.jpg)
15
Compressed Gas Cylinder Handling and Storage
Keep protective caps on stored CGCs
Prevent the dropping or banging of CGCs
Don’t roll CGCs along the bottom rim
![Page 16: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/16.jpg)
16
Compressed Gas Cylinder Handling and Storage
Don’t lift CGCs by the cap unless using hand trucks designed for this purpose
Prevent cylinders from falling, or from having objects fall on them
![Page 17: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/17.jpg)
17
Compressed Gas Cylinder Handling and Storage
Ensure that valves, hoses, connectors, and regulators are in good condition
![Page 18: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/18.jpg)
18
Compressed Gas Cylinder Handling and Storage
Never open valves until regulators are drained of gas and pressure adjusting devices are released
When empty, close and return CGCs to the vendor
![Page 19: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/19.jpg)
19
Compressed Gas Cylinder Handling and Storage
Empty CGCs must be labeled “MT” or “Empty”
Keep oil and grease away from oxygen CGCs, valves, and hoses
![Page 20: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/20.jpg)
20
Fire Watches for Welding Operations
![Page 21: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/21.jpg)
21
Designate a Fire Watch WhenThese Conditions Exist
Combustible material is within 35 feet of the point of operation
Combustibles are more than 35 feet away, but are easily ignited by sparks
![Page 22: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/22.jpg)
22
Wall or floor openings within a 35-foot radius expose combustible material in adjacent areas
Combustible materials opposite of walls or ceilings can be ignited by conduction or radiation
Designate a Fire Watch When These Conditions Exist
![Page 23: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/23.jpg)
23
Fire Watchers Will…
Have fire extinguishers readily available, and be trained in their use
Be familiar with alarm systems and their operation in the event of a fire
![Page 24: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/24.jpg)
24
Fire Watchers Will…
Watch for fires in all exposed areas
Only try to extinguish fires obviously within the capacity of the equipment
![Page 25: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/25.jpg)
25
Fire Watchers Will…
Stay in hot work areas for at least one half hour after hot work operations have ceased to detect and extinguish smoldering fires
![Page 26: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/26.jpg)
26
Welding Safety in Confined Spaces
Before entry, test the work space for the following types of hazards:•Flammability•Combustibility•Toxic fumes•Slippery floor
surfaces
Welding Safety in Confined Spaces
![Page 27: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/27.jpg)
27
When and where applicable, wear respiratory protection and a safety harness attached to a lifeline
Welding Safety in Confined Spaces
![Page 28: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/28.jpg)
28
When Hot-Work in a Confined Space is Interrupted
Disconnect power to arc welding or cutting equipment
Remove electrodes from holders
Turn off torch valves
![Page 29: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/29.jpg)
29
Turn off gas supply to gas welding and cutting units at a point outside the space
Remove the torch and hose from the confined space, if possible
When Hot-Work in a Confined Space is Interrupted
![Page 30: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/30.jpg)
30
Keep welding areas free of combustibles
Ensure proper storage of compressed gas cylinders
Make Housekeeping a Priority
![Page 31: 1/05 Welding, Cutting, and Brazing. 2 Notice This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost. This](https://reader036.vdocuments.mx/reader036/viewer/2022062500/56649ccf5503460f9499bc0e/html5/thumbnails/31.jpg)
31
Getting the job done safely is the first consideration
Always evaluate the job and implement appropriate safety precautions
Don’t Take Shortcuts