CULTIMERCULTIMER

T H E A R T O F C O N T R O l l I N G S T U B B l E C U l T I V A T I O N !

100 and 1000 SeriesMultipurpose tine stubble cultivator

CULTIMER

KUHN offers stubble cultivation solutions to meet your requirements in terms of:Cost

reductionGood

practices

Stubble cultivation is a key stage in intercropping. KUHN's Cultimer rangeprovides a solution for every situation:

• Versatility, with 350 mm fins forsuperficial work and 80 mm tines forin-depth work

• Mixing, both intensive and optimalwith the tine/deflector pair

• Clearance, significant under theframe for working in areas wherethere are large quantities of plantdebris

• Safety, with a double spring pro-tecting the equipment for constant efficiency

• Compaction, with the different rollers available

• Adjustment, working depth is easilyadjusted by positioning a pin

Choosing a Cultimer is ensuring high-quality work with a simple, robust,effective tool. One passage and twooperations for optimal use.

MULTIpURposE TInE sTUbbLE CULTIvaToR

www.kuhn.com

Comfort - Quality of life

Proximity -Advice

Peace of mind -Services

3

CULTIMER

1

2

3

Versatility and efficiency

Deep stubble cultivationto break up the ground

- The 80 mm wide tines allow working thesoil as deep as 30 cm, in one or two passages if necessary, depending on thetype of soil.

- Safety through the double spring provides deep penetration capacity, prevents tine slippage and protects theframe.

Significant under-beamclearance to cope withany conditions

- The clearance under the frame (840 mm) means you can workeven where there are dense plantresidues.

- The spacing of tines on each rowand between rows reduces the riskof clogging.

The mounted range owes its versatility to the different widths available, adapting to medium and high-power tractors.The Cultimer is used for intensive, effective stubble ploughing, whether superficial or deep. It adapts to every farm'sconditions: active mixing of plant residues, necessary soil loosening, straw breaking down...

MoUnTED 300 / 350 / 400 / 500

Superficial cultivation for optimal mixing

- The incurved 1 shape of the tines promotes soil-residue mixing.

- The deflector 2 increases the soil turning effect and facilitates the evacuation and distribution of resi-dues.

- Movable blades 3 mean that thewhole surface of the soil is tilled during superficial stubble cultivation.

4

www.kuhn.com

Design with 3 rows oftinesThe tine / disc and roller combinationperforms the following in a single passage:- breakage and crumbling;- intensive mixing;- surface levelling;- soil tamping

Action on the soil and residues:- Mixes crop residues with the soil to activate decomposition.- Reduces the length of stubble- Destroys plant cover in a single passage

Safety and penetration capacity

The large cross-section double spring prevents anyaccidental slipping.- The spring's attachment point on the tine generatesslight rotation of axes.

- The tine attachment bracket provides a significantarea of contact with the frame.

Safety during transport

- Folding models fold to 3 m for transport in perfect safety.

- Disc retraction is provided on fixedmodels

5

CULTIMER

Versatility for large farms

The trailed Cultimer is designed to provide high work output without sacrificing the quality of work. Available in 6.5 mand 8 m widths, this version has 4 rows of tines for more efficient work.Also assembled on the principle of large under-beam clearance and incurved tines, the trailed Cultimer gets the most ofout of high-power traction for maximum daily yield.

Hitch on lifting arms (category 3 and 4)

For optimal control of working depth- Easy to manoeuvre at the end of the field with its small turning radius- The double articulation means that it follows ground unevenness more closely

TRaILED 6500 / 8000

Design with 4 rows of tines• More space between tines (1240 mm)• Better circulation of debris under the frame• Better mixing quality, even in areas where

there are large quantities of plant debris

www.kuhn.com

6

Front gauge wheels

The wheels (11.5/80-15) improve theworking depth evenness on the extensions.The wheels are easily adjusted usingmechanical ties..

Simple adjustment easyto access (5 to 30 cm)

- Working depth is controlled by the roller.- The working depth of the tines is adjustedby means of pins.

- The roller and levelling discs are adjustedin a single operation.

Folding for transport

Folding brings the machine's width downto 3 m for transport, to remain in compliance with legislation and be able tocirculate on narrow roads..

2

3

1

YOUR KUHN DEAlER:

Our material is produced in accordance with the European Machinery Directive in the member states of the European Union. In countries outside the E.U., our machinery complies with the safety regulationsset by the country concerned. Some safety devices may have been removed from our leaflets in order to clarify the illustration. Under no circumstances should the machine be operated without the necessarysafety devices in place (as specified by the assembly instructions and operators manual). We reserve the right to change any designs, specifications or materials listed without further notice. Our models andtrademarks are patented in more than one country. Machines and equipment in this leaflet can be covered by at least one patent and/or registered design. Registered trademark(s).

To p

rote

ct th

e en

viro

nmen

t, th

is le

afle

t is

prin

ted

on c

hlor

ine-

free

pape

r. / P

rinte

d in

Fra

nce

- 95

0 03

9 GB

- 0

4.11

- C

opyr

ight

KUH

N 20

11 -

250

0

SP EC I F I C AT I ONSWorking width (m) 3 3.5 4 5 6.5 8Transport width (m) 3 3.5 3 3 3 3Folding rigid rigid frame frame frame frameNumber of tines 10 11 13 16 21 25Under-beam clearance (mm) 840 840 840 840 840 840Distance between beams (mm) 700 700 700 700 700 700Distance between tines on one row (mm) 900 954 921 937 1240 1240Pitch between tines (mm) 300 318 307 312 310 310Width of share (mm) / blades (mm) 80 / 350 80 / 350 80 / 350 80 / 350 80 / 350 80/350Weight (kg) 1690 2073 2700 3262 6496 7277Max. tractor power (kW/hp) 110 / 150 128 / 175 146 / 200 183 / 250 256/350 295/402Types of rollers available Tube / Tube / Tube / Tube / T-Ring T-RingT-Ring T-Ring T-Ring T-Ring

Cultimer 300 Mounted

Cultimer 350 Mounted

Cultimer 400 Mounted

Cultimer 500 Mounted

Cultimer 6500 Trailed

Cultimer 8000 Trailed

KUHN* Services: benefits for maximum use and profitability of your equipmentThe KUHN difference through services means...

- Receiving advice of Partners trained in the latest product developments, to selectthe machine best suited to your needs;

- Benefiting from a technical documentation that will accompany you during of ofyour machine’s service life, to best capitalize on your machine;

- Having a Parts service available all day round, 7 days a week at competitive prices;

- Anticipating the unexpected with the warranty extension and face the unexpected with tech at your dealership

- Investing rationally with .

*Some services may not be available in certain countries.

s

KUHN NORTH AMERICA - Corporate Headquarters1501 West Seventh Avenue - P.O. Box 167Brodhead, WI 53520-0167 USATel: (608) 987-2131 - Fax: (608) 897-2561E-mail: info@kuhnnorthamerica.comwww.kuhnnorthamerica.com

KUHN FARM MACHINERY PTY. LTD7 Manorwood Pl. - MITCHAM, 3132 VIC,Fax: 03 9874 3462www.kuhn.com

United Kingdom : KUHN FARM MACHINERY (U.K.) LTDStafford Park 7,TELFORD - SHROPSHIRE TF 3 3 BQPhone: TELFORD (01952) 239300/1/2Fax: (01952) 290091www.kuhn.co.uk - info@kuhn.co.uk

KUHN - HUARD S.A. - F 44142 Châteaubriant Cedexwww.kuhn.com

Carbide wearing parts: increased service life

1 V-shaped for good penetration, with 3carbide plates. Thecentral plate is twice as thick for increased wear resistance.

2 20 mm thick ribbed point with a boss protecting the 2screws

3 Wings with carbide plates ensuring a 320 mm workarea (thickness 12 mm)