10 - cabinet joint · pdf filec 201 7 10.1 interior storage 10 custom dovetail drawer boxes...
TRANSCRIPT
Custom Products | Summer 2017 10.1
Interior Storage
10Custom Dovetail Drawer Boxes
• Conestoga’s Drawer Box program offers multiple wood specie selections and custom options. Information about dovetail drawer boxes and related options are found on the following pages.
• Dovetail drawer boxes are fully assembled; Hard Maple, Soft Maple and Walnut can be ordered unfinished or finished; Natural Birch and Birch plywood drawer boxes are only available finished. See finishing information contained in this section.
• Natural Birch, Birch plywood, Hard Maple, Soft Maple and Walnut drawer box options and accessories have a 7 day standard lead-time, and a 2 day code red expedite lead-time; add 2 days for finishing. All other published specie drawer box species, add 5 additional days.
Custom Dovetail Drawer Box Specifications
The following species are available for the 5/8" Custom Dovetail Drawer Box program:
• Hard Maple and Soft Maple boxes are constructed with Maple veneer (wood composite core) bottom.
• Natural Birch solid and plywood boxes are constructed with Natural Birch veneer face and sound back plywood bottom.
• Walnut boxes are constructed with Walnut 1/4" veneer bottom only. 3/8" bottoms not available.
• Two finishing options are available on custom drawer boxes. Standard finish on all program species is a durable, low emission UV topcoat. Hand sprayed, catalyzed conversion varnish is available at an additional upcharge on Hard Maple, Soft Maple and Walnut drawer boxes. Both finish options have a 15° sheen topcoat. See Additional Options and Pricing chart.
• Natural Birch drawer boxes are also available with unsanded/unfinished dovetails as a cost savings. Sides, backs and bottoms have a clear UV finish. Option not available on Hard Maple, Soft Maple or Walnut.
• Plywood dovetail boxes are constructed from 5/8" Natural Birch plywood with .5mm Birch edgeband on the top edges and 1/4" Birch plywood bottoms. Drawer sides, fronts, backs and bottoms are finished with a durable UV topcoat. Dovetail joints are unsanded, unfinished and unputtied. Available options include undermount notching, Blum TANDEM clip installation and logo burn.
Prici
Dovetail Drawer Box Size Parameters
Description Minimum Maximum Increments
Height 2" 12" 1/2"
Width 3" 46" 1/16"
Depth 3" 31" 1/16"
Custom Products | Summer 201710.2
Inte
rior
Stor
age
10
Additional Options and Pricing
Bottom Thickness
1/4" Standard See drawer box height charts for pricing3/8" Requires 1/8" to be added to the drawer box height
No Bottom Optional No Upcharge
Bottom Reveal
1/2" Standard No Upcharge
3/8" Optional
Finishing Options (clear topcoat only, per box)
Standard UV finish
100 lineal inches or fewer per box
Greater than 100 lineal inches per box
Hand spray finish (pricing per box in addition to standard finishing charges)
Logo Burn
Private label logo burn
Top Edge Profiles (unfinished dovetail option not available)
Drawer box bottom
Reveal DetailReveal: 1/2" or 3/8"
*Natural Birch 3/8" drawer box bottoms utilize Maple veneer with composite core.
Dovetail Drawer Box Pricing
Drawer Box Height, 3/8" Bottom1/8" added to accommodate 3/8" bottoms
Specie 2-1/8" – 3-1/8" 3-5/8" – 4-1/8" 4-5/8" – 6-1/8" 6-5/8" – 8-1/8" 8-5/8" – 10-1/8" 10-5/8" – 12-1/8"
Natural Birch*
Maple, Hard
Maple, Soft
Standard eased edge1/16" RadiusNo upcharge
Eased edge front and backbull-nosed sides
Bull-nosed full radius edgefour sides
Machine edgefour sides
1/8" Routed edgeAll except outside front edge
Offset sidesSides 1/8" lower than
front and back
*Contact your Customer Service Representative for tooling requirements and costs.
Drawer Box Height, 1/4" Bottom
Specie 2" – 3" 3-1/2" – 4" 4-1/2" – 6" 6-1/2" – 8" 8-1/2" – 10" 10-1/2" – 12"
Natural Birch, unfinished dovetails
Natural Birch
Maple, Hard
Maple, Soft
Birch Plywood
Walnut
Custom Products | Summer 2017 10.3
Interior Storage
10
Undermount Notching Options
• Undermount notching only.
• Undermount notching with hook hole boring (detail shown below).
• 2-1/2" wide undermount notching only.
• 2-1/2" wide undermount notching with hook hole boring (detail shown below).
• 5" wide undermount notching with hook hole boring (included standard).
• Minimum drawer box widths:
® Standard notch: 6".
® 2-1/2" and 5" notch: 11-1/4".
Cut-Down Sides
• Available for 3" or 4" high drawer boxes only.
• Add 1/8" to box height dimensions when ordering 3/8" bottoms.
• Rear box height 2".
• Unfinished dovetails not available.
Bread Box Top Routing
• Designed for 1/8" or 1/4" thick lids.
• 9/32" deep groove on sides only.
• 1/8" rout is 5/32" wide.
• 1/4" rout is 9/32" wide.
• Minimum box height 4".
• Lid not included.
Dovetail Drawer Box Options
Reveal Depth
1/2" or 3/8"
Back
Drawer Box Bottom
Undermount w/hook hole boring
1/4" dia. x 3/8" Deep
1/4" dia. x 3/8" Deep
1/4" dia. x 3/8" Deep
29/32"
7/16"
1-3/8"
2-1/2" wide notch w/hook hole boring
2-1/2"
7/16"
29/32"5" wide notch
w/hook hole boring
5"
7/16"
29/32"
Hand Pull
• Minimum box width is 8".
• Hand pull is 5-1/4" wide and 11/16" deep, centered on front of drawer box.
• Unfinished dovetails not available.
Back
Front
Eased Edges1/16" Radius
Eased Edges 1/16" Radius
Front
3" or 4"2"
Custom Products | Summer 201710.4
Inte
rior
Stor
age
10
Keyboard Tray Optionnt Only
• Minimum box width 12".
• Minimum box height 2".
• Maximum box height 3-1/8".
• Unfinished dovetails not available.
Dovetail Drawer Box Options (continued)
Eased Edges1/16" Radius
Blum TANDEM Clip Options00 Installed TANDEM Clips
• Pre-drilling and installation options are for Blum TANDEM drawer hardware.
• Pre-drilled pilot holes are drilled at the proper angle and spacing to accept TANDEM clips.
• Minimum box width 5-1/2".
• 1/2" reveal only.
• Undermount notching with hook hole boring are not standard and must be specified.
• Blum TANDEM Clips feature side-to-side, height and depth adjustment for fine tuning drawer front alignment. Loose clips not available.
Blum TANDEM Clips Pre-drilled Blum TANDEM Clips Installed
Eased Edges1/16" Radius
Front and BackFront Only
Blum part number T51.1901
Custom Products | Summer 2015 10.5
Interior Storage
10Dovetail Drawer Box Options (continued)
1/2"
1/4"
Roll Out Drawer Front Option •Drawerboxfrontis1"widerthanthe
overallorderedboxwidth.
•Minimumboxwidthis8".
Visible Storage Unit Routing •Minimumboxwidthis12".
•Minimumboxheightis7".
•Maximumboxwidthis24".
•Removabledividerincluded.Located1-1/2"behindfrontofdrawerbox.
1"
1"
Back Recessed Option • Minimumdrawerboxwidthis12".
• MustspecifyA,BandCdimensions.
•Recesscanbecenteredoroff-setfromeitherside.
•MinimumdimensionforAandBis4".MinimumdimensionforCis3-5/8".
A B
C
Custom Products | Summer 201510.6
Inte
rior S
tora
ge
10Custom Drawer Accessories
17-1/2"–32"
3/8"
3"
3-1/8"
3/8"
7-1/2"–13"
3"
3-1/8"
3/8"
14"–25-1/4"
3"
3-1/8"
3"
10-1/2"–19"
3/8"
3-1/8"
Cutlery Dividers•AvailableinNaturalBirchandHardMaple.
•Allcutlerydividerdesignsareconstructedwitha1/4"bottomunless“NoBottom”isspecified.
•WhenorderingspecifydesignA,B,C,D,E,F,GorH.
•Specifydepthandwidthin1/16"increments.Bothdimensionsaremeasuredfromoutsideedgetooutsideedge.
•Depthforalldesignsmustbebetween16"to22".Refertospecificdesignforwidthrange.
•Whenorderedwithadrawerbox,cutlerydividersaresized1-5/16"lessthantheexteriorwidthanddepthoftheoveralldrawerboxsize.
•Toorderacustomsizecutlerydivider,specifythedepth,widthanddesignasaseparatelineitemontheorderform.
•Standardheightis3-1/8".Heightmodificationsavailable;seefollowingpagesforoptionsandpricing.
Design A Design B
Design DDesign C
Custom Products | Winter 2016 10.7
Interior Storage
10Custom Drawer Accessories (continued)
3/8"
14"–25-1/4"
3-1/8"
3/8"
17-1/2"–32"
3-1/8"
1-5/8"
Front
Sliding Cutlery Divider
•
® Available with all divider configurations; specify design when ordering.
® Top divider is 1-3/8" high mounted on a 1/4" base.
® Recommended maximum drawer box width is 24" to ensure proper operation.
3/8"
7-1/2"–13"
3-1/8"
10-1/2"–19"
3/8"
3-1/8"
Design HDesign G
Design E Design F
No Bottom Option
• No upcharge.
® All cutlery divider designs are constructed with a 1/4" bottom unless “NO BOTTOM” is specified.
® Maximum height of cutlery dividers with no bottom is 2-7/8".
Reduced Height Option
•
® All divider designs can be reduced in height for specialty applications.
® Specify divider height when ordering.
® Minimum divider height with bottom is 1-5/8".
® Minimum divider height without bottom is 1-3/8".
Custom Products | Winter 201610.8
Inte
rior
Stor
age
10
Fineline Cutlery Dividers
• Unique, tapered divider design affords sturdy compartment divisions with pleasing minimal profile.
• Available in Natural Birch or Walnut with a clear finish.
• Base plate is designed to be trimmed to fit the interior dimensions of a specific drawer box.
• Each unit includes a trimmable depth extender for a truly custom fit and maximum storage.
• Optional knife block can be incorporated into cutlery units for maximum utensil storage.
• Knife block measures 5-7/16" wide x 16-11/16" deep and accommodates 5 pieces of cutlery.
• Cut-to-size option
® All Fineline dividers can be cut to fit inside a drawer box. Specify interior dimensions of drawer box.
® Dividers will be packaged independently of the drawer box.
Custom Drawer Accessories (continued)
Part No. Description
556.87.601 Fineline Cutlery Insert – Walnut – 15-9/16" wide
556.87.602 Fineline Cutlery Insert – Walnut – 21-9/16" wide
556.87.603 Fineline Cutlery Insert – Walnut – 27-5/8" wide
556.87.604 Fineline Cutlery Insert – Walnut – 33-9/16" wide
556.87.901 Fineline Cutlery Insert – Birch – 15-9/16" wide
556.87.902 Fineline Cutlery Insert – Birch – 21-9/16" wide
556.87.903 Fineline Cutlery Insert – Birch – 27-5/8" wide
556.87.904 Fineline Cutlery Insert – Birch – 33-9/16" wide
Part No. Description
556.91.640 Fineline Knife Block – Walnut – 5-7/16" wide x 16-11/16" long
556.91.940 Fineline Knife Block – Birch – 5-7/16" wide x 16-11/16" long
Custom Products | Winter 2016 10.9
Interior Storage
10Custom Drawer Accessories (continued)
ORGA-LINE Drawer Dividers for Tandem Drawers
• ORGA-LINE drawer inserts are designed to provide reconfigurable drawer storage and organization solutions.
• Designed to fit 21" deep (24" deep cabinets) wooden 563 Series Tandem sized drawers. Drawer organizers are spring loaded to ensure they stay secure within the drawer.
• Four unique designs incorporate stainless steel and nylon trays and dividers.
• All ORGA-LINE accessories carry Blum’s lifetime warranty.
• Minimum exterior drawer box width is 12-7/16".
• Minimum drawer box height is 4".
• Five adjustable/removable trays: 3-7/16"W x 10-1/2"D x 2-3/8"H.
• Trays and dividers are dishwasher safe up to 170 .̊
• Minimum exterior drawer box width is 16-1/4".
• Minimum drawer box height is 4".
• In addition to five adjustable/removable 10-1/2" trays, a spring loaded lateral divider is included.
• Trays and dividers are dishwasher safe up to 170 .̊
• Minimum exterior drawer box width is 13-1/8"
• Minimum drawer box height is 4"
• Unit includes one 10-1/4" tray, two 7" trays, two 3-7/16" trays and multiple lateral dividers. All trays and dividers are adjustable and removable.
• Trays and dividers are dishwasher safe up to 170 .̊
• Minimum exterior drawer box width is 12-1/16".
• Minimum drawer box height is 4".
• Adjustable/reconfigurable horizontal and vertical divider components.
11-3/16"
15"
11-7/8"
11-9/16"
Part No. Description
2100812 ORGA-LINE Design A
Part No. Description
2100813 ORGA-LINE Design B
Part No. Description
2100814 ORGA-LINE Design C
Part No. Description
2100815 ORGA-LINE Design D
Custom Products | Winter 201610.10
Inte
rior
Stor
age
10
Knife Block Insert
• Can be sized to fit a specific drawer box or ordered separately. If ordering separately, specify width and depth.
• Knife block and handle rest are unfinished Hard Maple mounted on a prefinished 1/4" bottom.
• Spacing is 1-1/4" between slots.
• Minimum insert: 7-1/2" wide x 16" deep.
• Maximum insert: 21" wide x 22" deep.
Custom Drawer Accessories (continued)
Spice Tray Insert
• Can be sized to fit a specific drawer box or ordered separately. If ordering separately, specify width and depth.
• 3/4" diameter finger hole centered on lead rail for ease of removal from a drawer box.
• Spice rests are 5-1/4" wide, 1-1/2" high, mounted on a prefinished 1/4" bottom.
• Minimum insert: 7-1/2" wide x 17" deep.
• Maximum insert: 32" wide x 22" deep.
Spice Tray Insert Width
Specie 7-1/2" – 15" 15-1/16" – 23" 23-1/16" – 32"
Natural Birch
Maple, Hard
Custom Products | Summer 2015 10.11
Interior Storage
10
Fineline Plate Organization Sets•Plateorganizationsetsaredesignedtobeinstalled
indeepdrawerboxesforstackeddishwarestorage.
•Baseplatescanbeeasilytrimmedtosizetofittheinteriordimensionsofaspecificdrawerbox.
• AvailableinNaturalBirchorWalnutwithaclearfinish.
•Perforatedbaseplateshaveadjustmentholesin32mmintervalsandare3/8"thickcoveredwithBirchorWalnutveneer.
•Roundsupportpostsare6-15/16"highandaresolidBirchorWalnutwithaclearfinish.Postsmountedtobaseplatewithathreadedinsertsecuredwithafasteningnut.
•Postsaredesignedtoaccommodatedifferentshapesandsizesofdishware.
•Setincludes1baseplate,12postsand4bumpers.
•OptionalFinelineslottedplateracksalsoavailable.
•Verticalslottedplateracksforsmallerplatesandbowlsalsoincludeathreadedinsertsecuredwithafasteningnut.
• Cut-to-size option® Plateorganizationbaseplatescanbecuttofitinsideadrawerbox.Specifyinteriordimensionsofdrawerbox.
® Cut-to-sizekits(baseplateandposts)willbepackagedindependentlyofthedrawerbox.
Part No. Description
557.47.701 PegboardBasePlateSet–Walnut–34"widex22"deep
557.47.801 PegboardBasePlateSet–Birch–34"widex22"deep
556.87.650 FinelinePlateRack–Walnut–4-3/4"highx18-13/16"wide
556.87.950 FinelinePlateRack–Birch–4-3/4"highx18-13/16"wide
Custom Drawer Accessories (continued)
Includes12posts
Includes2slottedracks
Custom Products | Summer 201510.12
Inte
rior S
tora
ge
10
1-13/16"
Cabinet Side
•Adjustablepull-outtrayhardwaresystemsfeatureunfinishedSoftMaplecomponentsand75lb.capacityballbearingfullextensiondrawerslides.Drawerboxesnotincluded.
•Kitsareavailableforbase(24"deep),vanity(21"deep)ortallutility(21"and24"deep)cabinetryapplications.Baseandvanitykitsincludehardwarefor2fullwidthpull-outs.Tallkitsincludehardwarefor4fullwidthpull-outs.
•Twocleatwidths“A”or“B”(horizontaldrawerslidesupports)areavailabletoaccommodateoverlayorinsetandframedorframelesscabinetconstruction.
•Verticalcornercleatscanbetrimmedinheighttoaccommodateadjustableshelves.
•4daystandardlead-time,2daycoderedexpeditelead-time.
System cleat width “A”ForframelessandoverlayapplicationsBase/Tall:3/4"x1-5/16"x21-15/16"Vanity:3/4"x1-5/16"x18-15/16"
Base/Vanity Corner Cleats4pieces3/4"x1"x19-1/4"(sixpositions)
Tall Corner Cleats 4pieces3/4"x1"x51-3/4"(16positions)
Adjustable Pull-Out Tray System Kits
System cleat width “B”ForframedandinsetapplicationsBase/Tall:3/4"x2-1/16"x21-15/16"Vanity:3/4"x2-1/16"x18-15/16"
2-9/16"
Cabinet Side
System Kits - Cleat Width “A” System Kits - Cleat Width “B”Kit Number Description Kit Number Description
SYSB24-AA Base24"(3/4"x1-5/16"x21-15/16") SYSB24-BA Base24"(3/4"x2-1/16"x21-15/16")
SYSTB24-AA Tall24"(3/4"x1-5/16"x21-15/16") SYSTB24-BA Tall24"(3/4"x2-1/16"x21-15/16")
SYSV21-AA Vanity21"(3/4"x1-5/16"x18-15/16") SYSV21-BA Vanity21"(3/4"x2-1/16"x18-15/16")
SYSTV21-AA Tall21"(3/4"x1-5/16"x18-15/16") SYSTV21-BA Tall21"(3/4"x2-1/16"x18-15/16")
Single Shelf Kits - Cleat Width “A” Single Shelf Kits - Cleat Width “B”Kit Number Description Kit Number Description
SYSSB24-AA Base24"(3/4"x1-5/16"x21-15/16") SYSSB24-BA Base24"(3/4"x2-1/16"x21-15/16")
SYSSV21-AA Vanity21"(3/4"x1-5/16"x18-15/16") SYSSV21-BA Vanity21"(3/4"x2-1/16"x18-15/16")
Custom Products | Summer 2017 10.12A
Interior Storage
10
1-1/4" 2-1/2"
• Adjustable pull-out tray hardware systems feature clear prefinished Hard Maple components and patented drawer slide installation/adjustment brackets. Drawer slides not included.
• Installation/adjustment clips are designed for Tandem style undermount drawer slides.
• Pilasters and brackets use 5mm x 32mm spacing.
• Kits are available for base, vanity or tall utility cabinetry applications.
• Two cleat widths are available to accommodate overlay or inset and framed or frameless cabinet construction.
• Pilasters (vertical uprights) can be trimmed in width or height for installation in varied styles of cabinet construction and interior configurations.
• Drawer box width and depth dimensions are based on the requirements of the drawer hardware being used and must be ordered separately.
• 4 day standard lead-time, 2 day code red expedite lead-time.
X-Series Adjustable Pull-Out Tray System Kits
1/4" Pilaster Kits with Brackets
Kit Number Description Cabinet Application
2100160 (4) 20-7/8" pilasters (8) brackets Base with door and drawer
2100161 (4) 28" pilasters (8) brackets Base full height door
2100162 (4) 58-5/8" pilasters (20) brackets Tall Utility
2-1/2" Pilaster Kits with Brackets
Kit Number Description Cabinet Application
2100163 (4) 20-7/8" pilasters (8) brackets Base with door and drawer
2100164 (4) 28" pilasters (8) brackets Base full height door
2100159 (4) 58-5/8" pilasters (20) brackets Tall Utility
1-1/4" 2-1/2"
1-1/4" Pilaster kits with bracketsFor frameless and most framed overlay applications.
2-1/2" Pilaster kits with bracketsFor inset, wide framing and thick door applications.
Custom Products | Summer 201710.12B
Inte
rior
Stor
age
10
Circle Hand Pull
• Minimum box width is 5-3/4".
• Circle pull diameter is 1-1/2", placed 1" down from top edge and centered on the width of the front of the box.
• Front and back placement is optional and must be specified.
• Not available with unfinished dovetail option.
Custom Drawer Accessories
Ellipse Hand Pull
• Minimum box width is 9".
• Ellipse pull is 5”, placed 1” down from top edge and centered on the width of the front of the box.
• Front and back placement is optional and must be specified.
• Not available with unfinished dovetail option.
Finish Sample Chip Display Boxes
• Dovetailed drawer boxes with hand pulls and interior dividers accommodate Conestoga’s standard size sample finish chips (3/8" thick x 4-3/8" wide x 6-1/8" high). Custom box sizing is also available to accommodate custom dimensioned chips.
• Finish Sample Chip sets must be ordered separately.
• Matching specie wooden spacers are installed in the front and back of each display box to allow easy indexing of samples.
• 5" high boxes standard.
• Sizing for standard Conestoga 26 piece chip sets:
® Single set design: 5" high x 5-3/4" wide x 14" deep.
® Double set design: 5" high x 10-5/8" wide x 14" deep.
® Triple set design: 5" high x 15-1/2" wide x 14" deep.
To accommodate 32 piece chip sets, depth for all designs should be ordered 16-5/8" deep.
• Sample box price follows drawer box specie per lineal inch material charge, assembly and finishing charges plus the design charges.
• To order customized Finish Sample Chip Display Boxes, follow these min./max. size guidelines:
® Single set design: Min. width 5-3/4", Max. width 15", max. depth 21"
® Double set design: Min. width 10-5/8", Max. width 24", max. depth 21"
® Triple set design: Min. width 15-1/2", Max. width 31", max. depth 21"
Single Set Design Circle pull front/back standard
Double Set Design Ellipse pull front/back standard
Triple Set Design Ellipse pull front/back standard
Custom Products | Summer 2015 10.13
Interior Storage
10Spice Storage Units
•Dovetailconstructionwith5/8"thicksidesandends.
•1/4"plywoodbackflushwithbackofunit.
•32mmlineboreshelfsupportsystem.
•5mmlockingshelfclips.
•Matchingspecieretainerrailattachedtounitbottomandeachadjustableshelf.
• Installationhardwareisnotincluded.Additionalhingesandadequateinstallationhardwarearerequiredtoensureproperoperation.
•Availablesizerange:
Height:18"to36"Width:8"to21"Depth:3-1/8"fixed
Todeterminethelistpriceofaninteriorstorageunit:
•Findthesizerangeoftheunitintheapplicablespecietable.Selectthepricebasedontheoverallwidthandheightoftheunit.
•Addfinishingchargesifapplicable.
Spice Storage UnitsUnit Height Shelves Per Unit
18"-23" 2
23-1/16"-31" 3
31-1/16"-36" 4
Spice Storage Unit Pricing
Unit Height
Natural Birch - Unit Width Hard Maple - Unit Width
8" – 13" 13-1/16" – 17" 17-1/16" – 21" 8" – 13" 13-1/16" – 17" 17-1/16" – 21"
21"–23"
23-1/16"–31"
31-1/16"–36"
Custom Products | Summer 201510.14
Inte
rior S
tora
ge
10Can Storage Units
Loose shelvesSpice Storage Units Can Storage Units
•Specifyspiceorcanstyleandunitwidth.
•Finishingisincludedinprice.
•Dovetailconstructionwith5/8"thicksidesandends.
•1/4"plywoodbackflushwithbackofunit.
•32mmlineboreshelfsupportsystem.
•5mmlockingshelfclips.
•Matchingspecieretainerrailattachedtounitbottom,fixedcentershelfandeachadjustableshelf.
•Forstructuralintegrity,unitsover39"highhaveonefixedshelf,centered.
• Installationhardwareisnotincluded.Additionalhingesandadequateinstallationhardwarearerequiredtoensureproperoperation.
•Availablesizerange:
Height:21"to60"Width:8"to21"Depth:5"fixed
*Unitsover39"include1fixedshelf
Can Storage UnitsUnit Height Shelves Per Unit
21"-23" 2
23-1/16"–31" 3
31-1/16"–39" 4
39-1/16"–47"* 5
47-1/16"–55"* 6
55-1/16"–60"* 7
Can Storage Unit Pricing
Unit Height
Natural Birch - Unit Width Hard Maple - Unit Width
8" – 13" 13-1/16" – 17" 17-1/16" – 21" 8" – 13" 13-1/16" – 17" 17-1/16" – 21"
21"–23"
23-1/16"–31"
31-1/16"–39"
39-1/16"–47"
47-1/16"–55"
55-1/16"–60"
Custom Products | Summer 2015 10.15
Interior Storage
10
Spice Rack•Designedtobeinstalledinframedorframeless
cabinetry.
• Includesallmountinghardwarerequiredforbackofdoorinstallation.
•AttractiveChampagnefinishcoordinateswellwithcabinetinteriorsandexteriorcolors.
•Requiresoneframeandmultiplebasketkits,basedontheopeningheight.
•Eachbasketkitcontainstwobaskets.
•BasketfloorsarecoveredwithaMaplepatterned,non-slipmattingtokeepstoreditemsinplace.
Wall Organizer Units •Designedtobeinstalledinside9"or12"widefull
heightdoorwallcabinets.
•Adjustabledoormounthardwareincluded.
•Organizerunitsarefullyassembledandpackagedwithinstallationinstructions.
•Unitsincludeadjustableshelveswithchromerailsandfull-extensionballbearingdrawerglides.
•PrefinishedinNaturalBirchonly;unfinishedunitsarenotavailable.
•Frontdoorpanelsarenotincludedandmustbeorderedseparately.
Cabinet Accessories
Part No. Size
(W x H x D)Fits
CabinetRev•A•Shelf Reference
2100778 5"x26-1/4"x10-3/4" 9"wide 448-WC-5C
2100779 8"x26-1/4"x10-3/4" 12"wide 448-WC-8C
Part No. Description
543.34.830 Frame–Champagne–10"widex23-1/2"high
543.34.851 TrayMaple–Champagne–3"highx9-7/8"wide
543.34.852 TrayMaple–Champagne–5"highx9-7/8"wide
Custom Products | Summer 201510.16
Inte
rior S
tora
ge
10
Pull-out Storage Unit PricingPart No. Description
2100750A 3"BasePull-OutStorageUnit
2100751A 6"BasePull-OutStorageUnit
2100752A 3"WallPull-OutStorageUnit-30"high
2100753A 6"WallPull-OutStorageUnit-30"high
2100754A 3"WallPull-OutStorageUnit-36"high
2100755A 6"WallPull-OutStorageUnit-36"high
2100756A 3"WallPull-OutStorageUnit-42"high
2100757A 6"WallPull-OutStorageUnit-42"high
•Pull-outstorageunitsaredesignedfor3"or6"spacesbetweencabinetsandcanbeaccessedfrombothsides.
•Storageunitsarefullyassembledandpackagedwithinstallationinstructions.
•Wallandbasestorageunitsincludeadjustableshelveswithchromerailsandfull-extensionball-bearingslides.
•PrefinishedNaturalBirchonly;unfinishedunitsarenotavailable.
•Frontdoorpanelsarenotincludedandmustbeorderedseparately.
Pull-Out Storage Units
Wall UnitsAvailablein30",36"and42"high.Allwallstorageunits11-1/8"deep.
Base UnitsAllbasestorageunits23"deepand30"high.
Pull-Out Storage Unit InstalledMountpull-outstorageunitstoadjacentcabinets.
Custom Products | Summer 201710.16B
Inte
rior
Stor
age
10Cabinet Accessories
Base Organizer Units
• Designed to be installed inside 9", 12" or 15" wide full height door base cabinets.
• Adjustable door mount hardware included.
• Organizer units are fully assembled and packaged with installation instructions.
• Units include adjustable shelves with chrome rails and full-extension ball bearing drawer glides.
• Prefinished in Natural Birch only; unfinished units are not available.
• Front door panels are not included and must be ordered separately.
Base Pull-Out Unit
• Designed to be installed in framed or frameless full height door base cabinets from 9" wide to 24" wide.
• Includes all cabinet and door mounting hardware.
• Attractive Champagne finish coordinates well with cabinet interiors and exterior colors.
• Works in both inset and overlay applications.
• Each pull-out requires one full extension frame and one shelf kit, based on the opening width.
• Each shelf kit contains two trays that can be installed at the desired height.
• Shelf surfaces are covered with a Maple patterned, non-slip matting to keep stored items in place.
• Full extension, soft close runners have an 80 lb. load capacity.
Part No. Description
546.62.806 Full Extension Frame – Champagne – 3-3/4" wide x 21-3/8" deep
546.63.878 Base Pull-Out Maple – Champagne – 4" wide x 19-3/4" deep
546.63.877 Base Pull-Out Maple – Champagne – 5" wide x 19-3/4" deep
546.63.859 Base Pull-Out Maple – Champagne – 7" wide x 19-3/4" deep
546.63.812 Base Pull-out Maple – Champagne – 8" wide x 20-3/8" deep
546.63.832 Base Pull-Out Maple – Champagne – 10" wide x 20-3/8" deep
546.63.813 Base Pull-Out Maple – Champagne – 11" wide x 20-3/8" deep
546.63.833 Base Pull-Out Maple – Champagne – 13" wide x 20-3/8" deep
546.63.814 Base Pull-Out Maple – Champagne – 14" wide x 20-3/8" deep
546.63.834 Base Pull-Out Maple – Champagne – 16" wide x 20-3/8" deep
546.63.815 Base Pull-Out Maple – Champagne – 17" wide x 20-3/8" deep
546.63.835 Base Pull-Out Maple – Champagne – 19" wide x 20-3/8" deep
Part No. Size (W x H x D)Fits
CabinetRev•A•Shelf Reference
2100771 5" x 25-1/2" x 22-1/2" 9" wide 448-BC-5C
2100772 8" x 25-1/2" x 22-1/2" 12" wide 448-BC-8C
2100773 11" x 25-1/2" x 22-1/2" 15" wide 448-BC-11C
Custom Products | Summer 2017 10.17
Interior Storage
10Cabinet Accessories (continued)
Ready to Install Base Pull-Out
• Base Pullout Unit ships preassembled and includes drawer hardware and floor mounted cleats for easy installation.
• Constructed from Natural Birch edgebanded plywood finished with a durable, clear UV topcoat.
• Unique top mount support bracket is rated at 225lb. capacity. Eliminates excessive side-to-side movement and sag when fully extended.
• Can be installed in both framed or frameless and overlay or inset cabinet applications.
• Drawer hardware is undermount, full extension with soft close feature.
• Integrated 6-way adjustable door mounting hardware allows for easy installation for all overlays and framing widths.
Part No. Size (W x H x D)Fits
CabinetMin.
Opening
2100832 5-1/2" x 24" x 22" 9" base 6"
2100833 8-1/2" x 24" x 22" 12" base 9"
2100834 11-1/2" x 24" x 22" 15" base 12"
2100835 14-1/2" x 24" x 22" 18" base 18"
Ready to Install Bottom Mount Trash Can Pull Out
• Unit ships preassembled, including drawer hardware and floor mounted cleats for easy installation.
• Constructed from Natural Birch edgebanded plywood finished with a durable, clear UV topcoat.
• Integrated 6-way adjustable door mounting hardware allows for easy installation for all overlays and framing widths.
• Single and double units include one or two white polyethylene trash cans with 35 or 50 quart capacity.
• Single or double 50 quart units require full height base cabinets.
• Drawer hardware is undermount style full extension with soft close feature.
• Minimum opening requirement is 15", regardless of construction type.
Part No. Description/Dimensions
2100836 Single 35 quart can – 12-5/8"w x 21-3/8"d x 19-1/2"h
2100837 Double 35 quart cans – 15"w x 21-3/8"d x 19-1/2"h
2100838 Single 50 quart can – 12-5/8"w x 21-3/8"d x 23-3/4"h
2100839 Double 50 quart cans – 15"w x 21-3/8"d x 23-3/4"h
Custom Products | Summer 201710.18
Inte
rior
Stor
age
10Cabinet Accessories (continued)
Trash Can Pull-Out
• Available in Hard Maple and prefinished Natural Birch.
• 3/4" Hard Maple plywood top for Natural Birch and Hard Maple units.
• When ordering trash can pull-outs, specify the drawer box width. The top will extend 3/8" past the sides of the drawer box.
• Designed to be used with side mount full extension slides – hardware not included.
• Unit with single cut out includes one 7 gallon, almond color waste can; double cut out includes two waste cans; no cut out option does not include a waste can.
• Front height is 10" to accommodate door mounting hardware. Rear height is 3".
• Depth: 21-3/4" fixed.
Single cut out: Double cut out:
Minimum width: 11" Minimum width: 15"Maximum width: 21" Maximum width: 27"
Unit only, no cut out (solid top shipped loose):0
Minimum width: 11"Maximum width: 27"
Waste can only: Part #2100102A
Single cut out
Double cut out
Unit only, no cut out
Front
Custom Products | Summer 2017 10.18A
Interior Storage
10Cabinet Accessories (continued)
TANDEM Trash Can Pull-Out
• Available in Natural Birch and Hard Maple.
• 3/4" Hard Maple plywood top for Natural Birch and Hard Maple units.
• Designed to be used with Blum TANDEM plus Blumotion full extension drawer slides and narrow drawer front locking clips (not included).
• Hardware reference numbers:
® Blum Tandem plus Blumotion: 563H5330B.
® Narrow drawer front locking clips: T51.0801.20 (L/R).
• Unit with single cut out includes one 7 gallon almond color waste can; double cut out includes two waste cans; no cut out option does not include a waste can.
• Cut outs also accommodate 13 gallon trash cans.
• Height: 6-3/4" fixed (including 3/4" plywood top).
• Depth: 21-3/4" fixed.
Single cut out: Double cut out:
Minimum width: 14-5/8" Minimum width: 20-5/8"Maximum width: 19-1/8" Maximum width: 28-1/8"
Unit only, no cut out (solid top shipped loose):
Minimum width: 14-5/8"Maximum width: 28-1/8"
Waste can only: Part #2100102A
Single cut out
Double cut out
Unit only, no cut out
Front
Custom Products | Summer 201710.18B
Inte
rior
Stor
age
10
Pet Insert
• Can be sized to fit a specific drawer box or ordered separately. If ordered separately, specify width and depth.
• Available in Natural Birch and Hard Maple.
• 3/4" thick Natural Birch plywood insert and divider.
• Insert accommodates 5", 6-1/2" and 7-3/8" diameter bowls (not included).
• Bowls are available at most pet stores.
• Not intended to accommodate water bowls.
• 2" high plywood divider is shipped loose. Plywood base plate is pre-drilled with pilot holes for divider installation.
• Available in drawer box depths between 18" to 21".
Single cut out: Double cut out: Natural Birch Natural Birch Hard Maple Hard Maple
Minimum width: 12-3/4" Minimum width: 15" Maximum width: 18" Maximum width: 36"
Cabinet Accessories (continued)
Polyethylene Pet Insert
• Durable insert is machined from 3/4" thick high density polyethylene material.
• Spills are mitigated with a 1/2" wide x 5/32" deep drip groove.
• Available in Black, Dolphin Grey, Seafoam (off white) and White. Specify color when ordering.
• Insert option size is determined by drawer box width and depth.
• Available in drawer box depths between 18" and 21".
• Insert rests inside drawer box on 5mm steel shelf pins. Box is drilled and pins are included.
• Insert accommodates 5", 6-1/2" and 7-3/8" diameter bowls (not included). Bowls available at most pet stores.
• Heavy duty full extension drawer slides are recommended (not included).
Single cut out: Double cut out:Minimum width: 12-3/4" Minimum width: 15"Maximum width: 18" Maximum width: 36"
Custom Products | Fall 2016 10.19
Interior Storage
10
Single Trash Can Unit
Minimum Opening Width: 12" Framed Cabinets 12-3/4" Frameless Cabinets
Minimum Opening Height: 19-1/4"
Minimum Interior Depth: 21-13/16"
Double Trash Can Unit
Minimum Opening Width: 14-3/4" Framed Cabinets 15-1/2" Frameless Cabinets
Minimum Opening Height: 19-1/4"
Minimum Interior Depth: 21-13/16"
Pull-Out Bottom Mount Trash Can Units
• Units are preassembled and include trash cans, installation instructions and hardware.
• Attaches to back of door with 6 way adjustability. Door hinging is not required.
• Platinum metal base and trash cans.
• Trash cans are 36 quart capacity.
• Bottom mount unit with full extension soft close slides.
• 110 lb. weight capacity.
• Single and double trash can units available.
Part No.
503.15.801
Part No.
503.15.802
Cabinet Accessories (continued)
Pull-Out Waste Recycling Center
• Designed to be installed in 27" wide base cabinets. Minimum cabinet opening width required is 24". Minimum cabinet opening height required is 21".
• Recycling center includes 4 removable 27 quart polymer containers.
• Floor mounted unit includes 80 lb. capacity undermount drawer glides with soft-close feature and installation hardware.
Part No. Size (W x H x D)
503.13.771 23-3/4" x 19" x 23-1/8"
Custom Products | Fall 201610.20
Inte
rior
Stor
age
10Cabinet Accessories (continued)
LeMans II Corner Pull-Out Shelf
• Designed to be installed inside either full height or drawer/door blind corner base cabinets.
• Minimum door opening angle of 90 degrees required.
• Unit includes 2 trays and 2 posts.
• Shelves have Maple patterned non-slip surfaces with platinum colored metal rails.
• Shelf height is adjustable.
• Can easily be retrofitted into existing blind corner cabinetry.
• Maximum load per shelf is 65 lbs.
Corner Pull-Out Shelf
Part NumberShelf Size
Interior Width A
Interior Depth B
Opening width (Framed) C
Opening Width (Frameless) C Swing
541.32.445 15" 32-1/4" 21" 16-1/8" 17-1/8" Right
541.32.446 15" 32-1/4" 21" 16-1/8" 17-1/8" Left
541.32.450 18" 36-1/4" 21" 17-3/4" 18-3/4" Right
541.32.451 18" 36-1/4" 21" 17-3/4" 18-3/4" Left
541.32.460 21" 38" 21" 21-1/4" 22-1/4" Right
541.32.461 21" 38" 21" 21-1/4" 22-1/4" Left
Swings Left
C
B
A
C
A
B
Swings Right
Blind Corner System
• Swing-out pantry and roll out shelves maximize accessibility in blind corners.
• Units include drawer slides and installation instructions.
• Designed for blind cabinets with 15" wide or larger openings.
• Minimum frame opening height required is 19-3/4".
• Minimum cabinet interior depth is 22-5/8". Will not work with standard depth Cabinet Systems cabinetry or inset applications.
• Piano hinge on swing-out unit is reversible for left and right installation applications.
• 1/2" thick Maple with a clear finish; unfinished units not available.
Part No. Description
2100790 Blind Corner System
Custom Products | Summer 2015 10.21
Interior Storage
10Cabinet Accessories (continued)
Part No. Size (W x H x D)Fits
CabinetRev•A•Shelf Reference
2100767 11-3/4"x18"x22" 15"wide 5CW2-1222-CR
2100768 20-3/4"x18-1/8"x22" 24"wide 5CW2-2122-CR
Two-tier Cookware Organizers•Unitsaredesignedtobeinstalledinside15"or24"
widebasecabinets.
•Twoindependentrackingsystemsaccommodatepots,pansandtheircorrespondinglids.
•Verticaldividersareindependentlyadjustable.
•Unitsmounttofloor,sideandbackofcabinets.
•100lb.capacityfullextensiondrawerglides.
• Installationhardwareincluded.
•Wireframeconstructionwithchromefinish.
Heavy Duty Mixer Lift•Sidemountedhardwarekitdesignedtobeinstalled
infullheightbasecabinets.
•Recommendedforusein18",21"or24"widefullheightdoorcabinets.
•Gascylinderassistmovesheavystandstylemixerseffortlessly.
•Champagnefinish.
•30lb.weightcapacityaccommodatesmoststandstylemixers.
• Installationhardwareincluded.
•Shelfnotincluded.
Part No. Fits Cabinet
504.20.900 18",21"or24"(wide)
Custom Products | Summer 201510.22
Inte
rior S
tora
ge
10Cabinet Accessories (continued)
U-Shaped Tray Dividers•Floororshelfmountedunitsdesignedtobeinstalled
inmostwall,baseandtallcabinets.
•Soldindividually,eachunitprovides3"ofstoragespace;usemultipleunitsasnecessarytodivideandaccommodatecabinetinteriorspace.
• Installationhardwareincluded.
•Wireframeconstructionwithchromefinish.
Part No. Size (W x H x D)Rev•A•Shelf Reference
2100765 3"x10"x11-7/8" 596-10CR-52
Tray Roll-Out•Designedtobeinstalledinside9",12"or15"wide
cabinets.
•Unitsarefullyassembledincludingdrawerslidesandinstallationinstructions.
•Mapleplywoodconstructionwithremovabledividers.
•Unitsare10"highand22-5/16"deepfixed.WillnotworkwithstandarddepthinsetCabinetSystemscabinetry.
•Doorrequiresspeciallowerhingeheightlocationtoclear3-1/4"highdrawerfront;6"frombottomofdoorisrecommendedwith1-1/2"framing.
•Doesnotworkwithconcealedinsethinges.
•PrefinishedinNaturalBirchonly;unfinishedunitsarenotavailable.
Part No. Description
2100791 Roll-outfor9"basecabinet(5-3/4"wide)–1divider
2100792 Roll-outfor12"basecabinet(8-3/4"wide)–2dividers
2100793 Roll-outfor15"basecabinet(11-3/4"wide)–3dividers
Custom Products | Summer 2015 10.23
Interior Storage
10
Sink Front Tip-Out Trays•Designedtoprovideconvenientstoragebehindsink
drawerfronts.
•Soldinpairs;canbeusedindividuallyforsmallerdrawerfrontsorintandemforwiderdrawerfronts.
•Traysarewhite,highimpactpolystyrene.Onetrayisopenandoneincludesanintegralsoapdishandringpost.
•Eachkitincludestwopairofspringloadedscissorstylehingesandinstallationhardware.
•Drawerfrontsarenotincluded.
Part No. Size (W x H x D)Rev•A•Shelf Reference
2100769 11"x3-13/16"x2-1/8" 6572-11-15-52
2100770 14"x3-13/16"x2-1/8" 6572-14-15-52
Part No. Size (W x H x D) Rev•A•Shelf Reference
2100775 13"x9-3/4"x19-1/4" RAS-SMFD-52
2100776 15-7/8"x9-3/4"x19-1/4" RAS-LGFD-52
File Drawer Support Systems• Insertunitdesignedtofitinsideofdeepdrawersto
accommodatehangingfoldersystems.
•Designedfor18"or21"widecabinets.Railsaretrimmableforadditionalcustomization.
•Smallfilesystemaccommodateslettersizehangingfolders.
•Largefilesystemaccommodateslegalsizehangingfolders.
•Wireframeconstructionwithblackfinish.
•Hangingfoldersarenotincluded.
Cabinet Accessories (continued)
Under-Sink Mat•Designedtocontainwaterorotherfluidstoprevent
damagetocabinet.
•Dimpledsurfacecancollect1gallonofliquidper6squarefeet.
•Canbeeasilycuttofitmostcabinetinteriors.
•Polystyrenesheetwithgrey/stainlessfinish.
Part No. Size
547.91.550 24-5/8"x45-1/2"
Custom Products | Summer 201510.24
Inte
rior S
tora
ge
10Cabinet Accessories (continued)
Lazy Susan Shelves•Woodsusansaredesignedtobeinstalledontoadjustableshelvesorcabinetfloors.Pricing
includessusanandmountingringbearingonly,cabinetshelvesnotincluded.
•Susansmountdirectlyonsurfaces-nocenterpoleisrequired.
•Allsusansareprefinishedwithacleartopcoat;unfinishedunitsarenotavailable.
Standard Wood Lazy Susan Shelves•1/2"thickHardMapleplywoodwitha
1-1/2"highlaminatededge.
•Soldindividuallyandincludesacentermountedringbearing.
Wire Rim Wood Susan Shelves•1/2"thickHardMapleplywoodwith1-1/2"highlaminated
edgeand2"highpowdercoatedwirerim.
• Interiorheightis3".
•Soldinpairsonly.
Part No. Description
2100050A 32"KidneyWoodLazySusan
2100051A 32"FullRoundWoodLazySusan
2100052A 28"KidneyWoodLazySusan
2100053A 18"FullRoundWoodLazySusan
Part No. Description
2100788A 32"KidneyWireRimLazySusanSet
2100786A 32"FullRoundWireRimLazySusanSet
2100787A 28"KidneyWireRimLazySusanSet
2100785A 28"FullRoundWireRimLazySusanSet
Custom Products | Summer 2017 10.25
Interior Storage
10
Lattice Wine Racks
• Sold individually (specify two pieces if pair is desired).
• Trimmable in length and width.
• Standard rack bottle openings are 4" x 4".
• Square and Deluxe bottle openings are 4-1/4" x 4-1/4".
• Square and Deluxe wine racks can be used to make a pair.
• Available unfinished or finished. See Finishing Program section for pricing.
Cabinet Accessories (continued)
Lattice Wine Rack Pricing
Model Size
Unfinished Price
Cherry Hard Maple Red Oak
Standard 17" x 36"
24" x 30"
24" x 43"
Square 17" x 36"
24" x 30"
24" x 43"
Deluxe 17" x 36"
24" x 30"
24" x 43"
Standard Square
Deluxe
Squarecross section
11/16"
11/16"
Deluxecross section
Standardcross section
7/16"
3/4"
11/16"
11/16"
Custom Products | Summer 201710.26
Inte
rior
Stor
age
10
• Sold in pairs.
• 30" or 36" width.
• Overall height 13-1/16".
• Thickness 3/4".
• Constructed with 7/16" same specie dowels, 2" on center.
• Removable center dowel for access and ease of cleaning.
• Available unfinished or finished. See the Finishing Program section for pricing.
Cross section of plate rack display top and bottom rail
Plate Rack Displays
Specie
Unfinished Price
30" 36"
Cherry
Hard Maple
Red Oak
• Use 1.25 sq. ft. to calculate 30" racks and 1.50 sq. ft. to calculate 36" racks.
• Sold in pairs (front and back).
• 3/4" thick only, 30" or 36" length.
• Front is 2" high, back is 3" high.
• Bottle cutouts start 3" from end on 30" and 3-1/2" from end on 36".
• 30" holds 5 bottles, 36" holds 6 bottles.
• Horizontal grain direction only.
• Available unfinished or finished. See Finishing Program section for pricing.
Half Round Wine Racks
Custom Products | Fall 2016 10.27
Interior Storage
10
Oval Wardrobe Tube and Accessories
• Unique oval design provides support for hanging clothes in closets and tall utility cabinets.
• Dimensions: 1-3/16" high x 9/16" wide x 48" long. Can be easily trimmed to length using a hacksaw.
• Wardrobe Tube Supports are required for wall to wall, between closet panels or inside cabinet installation applications.
• Surface Mount Center Supports are required on longer wardrobe tube spans or when using full length tubes.
• End Caps are used to cover cut exposed ends or when not using Wardrobe Tube Supports.
• Wardrobe Tube, Tube Supports, Oval Bracket Surface Mount and End Cap have a chrome finish.
Closet Accessory Program
Part No. Description
801.13.244 2 Oval Wardrobe Tubes – Chrome – with 2 supports
802.04.208 Oval Bracket Surface Mount – Chrome – 1-13/16" high
802.05.295 End Cap – Chrome – 1-3/16" wide
Valet
• Designed to hold garments for dressing or to hang garment bags.
• Side mount installation to closet panels or cabinet interiors.
• Chrome finish.
• Dimensions: 1-1/16" wide X 1-7/8" x 14-1/4" long. Extension length is 9-9/16".
Part No. Description
808.70.231 Valet – Chrome – 1-1/16" wide x 14-1/4 long
Oval Bracket Surface Mount
End Cap Tube Support
Custom Products | Fall 201610.28
Inte
rior
Stor
age
10
Belt Rack
• Designed to neatly hang belts and other fashion accessories such as scarves.
• Side mount installation to closet panels or cabinet interiors.
• Chrome finish.
• 6 storage hooks.
• Dimensions: 2-3/16" wide x 1-11/16" high x 14-1/8" long. Extension length is 10-9/16".
Tie Rack
• Designed to neatly hang ties, scarves other such fashion accessories.
• Side mount installation to closet panels or cabinet interiors.
• Chrome finish.
• 20 storage hooks.
• Dimensions: 2-3/16" wide x 1-11/16" high x 14-1/8" long. Extension length is 10-9/16".
Closet Accessory Program (continued)
Part No. Description
807.54.231 Belt Rack – Chrome – 2-3/16" wide x 14-1/8" long
Part No. Description
807.54.233 Tie Rack – Chrome – 2-3/16" wide x 14-1/8" long
Custom Products | Summer 2015 10.29
Interior Storage
10
Shoe Fence•Designedtobeinstalledonhorizontalcloset
surfacesandinteriorshelves.
•Fencewidthcanbeeasilymodifiedbyremovingendpostandtrimmingwithahacksaw.
•Chromefinish.
•Fenceistwosidedwithbothsmoothandtexturedsurfaces.
•Dimensions:1-1/2"highxlengthsinchartbelow.
Closet Accessory Program (continued)
Part No. Description
547.52.221 ShoeFence–Chrome–11"long
547.52.222 ShoeFence–Chrome–17"long
547.52.223 ShoeFence–Chrome–23"long
547.52.224 ShoeFence–Chrome–29"long
547.52.225 ShoeFence–Chrome–41"long
Rectangular Battery Operated Light•Rechargeablefixturewithmotionon/offfeature.
•Nopowercordaffordseasyinstallation.
•RechargesusingminiUSBcable,included.
•Lithiumbatterywith8LEDlights.
•Nickelcolorfinish.
Cabinet Interior Light Strip•Elongatedrechargeablefixturewithmotionon/off
feature.
•Designedtobeinstalledinsidecabinets,draweropeningsandclosets.
•Nopowercordaffordseasyinstallation.
•RechargesusingminiUSBcable,included.
•Lithiumbatterywith6LEDlights.
•Nickelcolorfinish.
Part No. Description
833.87.013BatteryOperatedRectangularLightw/Sensor–
2-9/16"widex11/16"deepx4-3/4"long
Part No. Description
833.87.011BatteryOperatedLightw/Sensor–
13/16"deepx11-13/16"long