1 online-questionnaire sb with accessories 2011.03
TRANSCRIPT
8/2/2019 1 Online-Questionnaire SB With Accessories 2011.03
http://slidepdf.com/reader/full/1-online-questionnaire-sb-with-accessories-201103 1/4
Technology GmbHIndustriegebiet
D-66280 Sulzbach/Saar
Tel.: 0049 (0) 68 97 / 509 – 01
Fax: 0049 (0) 68 97 / 509 – 464
Internet: www.hydac.com
E-Mail: [email protected]
GENERAL ACCUMULATOR SPECIFICATION FORM (Page 1/2)(subject to technical modifications)
Company: Location:
Project name: Originator:
E-Mail: Tel. No.:
Application: Requirement: pieces / year
Note:
The appropriate accumulator can be selected using the HYDAC Accumulator Simulation Programm ASP.
Download from www.hydac.com
Accumulator type Bladder accumulator Piston accumulator Diaphragm accumulator
Fluids / Medium
Fluid: Viscosity at 20 °C: cSt
Density: kg/m³ Viscosity at operation temperature: cSt
Functioning of the pump Additional details on the accumulator
Continuous operation Intermittent operation Industry:
Country of installation:
Accumulator data Design/cerification:
Max. operating pressure: bar Specification:
Min. operating pressure: bar
Pre-charge pressure at 20 °C (nitrogen): bar Materials *(please see product catalogue no. 3.000, section on sizing) Accumulator shell:
Ambient temperature: °C Fluid connection:
Operating temperature: °C Elastomer:
Complete cycle time: s
Additional information
Fluid demand diagram for one pump and one consumer: Installation dimensions: mm(heigh x Øa)
Fluid connection: type:
Accumulator discharge rate: l/min for thread internal:
Accumulator discharge time: s external:
Flow rate of the pump: l/min standard:Pump runs vontinuously:
Pump starts after discharge: Gas connection:
Coating / internal
Paint specification: external
Spare parts / accessories: see www.hydac.com
Alternatively under products / accumulators
Fluid demand diagram for several pumps and/or consumers
(see page 2) * depending on operating temperature and/or fluid resistance
Notes:
Date: Name:
BLADDER ACCUMULATOR SPECIFICATION FORM (Page 1/4)
8/2/2019 1 Online-Questionnaire SB With Accessories 2011.03
http://slidepdf.com/reader/full/1-online-questionnaire-sb-with-accessories-201103 2/4
Technology GmbHIndustriegebiet
D-66280 Sulzbach/Saar
Tel.: 0049 (0) 68 97 / 509 – 01
Fax: 0049 (0) 68 97 / 509 – 464
Internet: www.hydac.com
E-Mail: [email protected]
GENERAL ACCUMULATOR SPECIFICATION FORM (Page 2/2)
Fluid demand diagram for several pumps and/or consumers
Designation / Example
QV = Consumer flow velocity [l/s]
EV = Switch-on time point of consumer [s]
AV = Switch-off time point of consumer [s]
EP = Switch-on time point of pump [s]
AP = Switch-off time point of pump [s]
Please indicate cycle data below
Number of consumers: Number of pumps:
QV1 = EV1 = AV1 = QP1 = EP1 = AP1 =
QV2 = EV2 = AV2 = QP2 = EP2 = AP2 =QV3 = EV3 = AV3 = QP3 = EP3 = AP3 =
QV4 = EV4 = AV4 = QP4 = EP4 = AP4 =
Q
[l/s]
time [s]
EV4
QV4
time [s]
pumps
consumers
EP2 AP2
QV1
QV2
QV3
EP1 AP1
EV1 AV1 AV2 AV3EV2 EV3 AV4
Q
[l/s]
BLADDER ACCUMULATOR SPECIFICATION FORM (Page 2/4)
8/2/2019 1 Online-Questionnaire SB With Accessories 2011.03
http://slidepdf.com/reader/full/1-online-questionnaire-sb-with-accessories-201103 3/4
Technology GmbHIndustriegebiet
D-66280 Sulzbach/Saar
Tel.: 0049 (0) 68 97 / 509 – 01
Fax: 0049 (0) 68 97 / 509 – 464
Internet: www.hydac.com
E-Mail: [email protected]
ACCESSORIES SELECT LIST AND SPARE PARTS FOR BLADDER ACCUMULATORS (page 1/2)
(subject to technical modifications)
The following HYDAC accessories and spare parts will complement your enquiry particularly well:
Charging and Testing Unit FPU-1
Universal FPU-1 consisting of: Spindle Valve body Check valve Release valve
Gauge:
Indication range up to barCharging hose (F)
Adaptor A3 (A)
Case (optional)
Pressure reducer
Adaptors for Charging and Testing Units
G2 – G12 G - Adaptors for connecting the N2-bottle to the FPU-1 ( G)
A1 – A12 A - Adaptors for connecting the bladder accumulator to the FPU-1 ( A)
Safety and Shut-off blocks SAF and DSV up to 400 bar
SAF10M/E with manual or manual/solenoid-oper. discharge DN10
SAF20M/E with manual or manual/solenoid-oper. discharge DN20
SAF32M/E with manual or manual/solenoid-oper. discharge DN32
DSV10 3-way safety block as low-cost version similar to SAF10
S10 - S22 S - Adaptors, SB to SAF10, 20; DSV10
S305 - S350 S - Adaptors, SB to SAF32
Additional components
L = lockable main shut-off valve (for use with padlock)
LPI = model L with additional position monitoring (inductive proximity switch)
LPM = model L with additional position monitoring (mechanical limit switch with roller lever)
LS = lockable pressure release valve
Spare parts
Repair kit: NBR Spindle repair kit
FPM
Seal kit: NBR 2-way directional valve, complete
FPM
Blanking plug, complete
hydraulic accumulatornitrogen bottle
G
pressure reducer
F
FPU-1
A
BLADDER ACCUMULATOR SPECIFICATION FORM (Page 3/4)
8/2/2019 1 Online-Questionnaire SB With Accessories 2011.03
http://slidepdf.com/reader/full/1-online-questionnaire-sb-with-accessories-201103 4/4
Technology GmbHIndustriegebiet
D-66280 Sulzbach/Saar
Tel.: 0049 (0) 68 97 / 509 – 01
Fax: 0049 (0) 68 97 / 509 – 464
Internet: www.hydac.com
E-Mail: [email protected]
ACCESSORIES SELECT LIST AND SPARE PARTS FOR BLADDER ACCUMULATORS (page 2/2)
(subject to technical modifications)
Accumulator safety devices
Gas side
Burst disc pmax = 1000 bar, burst pressure: (+/- 10 %) bar
Temperature fuse Carbon steel, melting point between +160 °C and +170 °C
Stainless steel, melting point between +160 °C and +180 °C
GSV6 Gas safety valve to protect accum. if permiss. operating
pressure is exceeded: Pressure setting: bar
GSB450 Adaptor block with different connection options
e.g. for safety devices (burst disc, temperature fuse, GSV6)
Fluid side
DB12 direct-operated pressure relief valve in seat valve construction
with excellent opening and closing properties for leakage-free
protection of user units.
Pressure setting: bar
Mounting elements
Accumulator clamps (item 1)
HyRac for bladder accumulators Ø 89 – 234 mm
HSS for bladder accumulators Ø 242 mm
Accumulator consoles
incl. rubber support ring (item 2+3)
KBK 167 / G for SB330 2.5 – 4 l
KHF 210 / G for SB – low pressure
KBK 222 / G for SB330 / 400, 4 + 6 l
Accumulator sets
SEB (for SB330 / 400)
SEH (for SB500 / 550 / 600)
Spare parts for HYDAC bladder accumulators
Repair kit (consisting of bladder and seal kit) Oil valve complete
For further enquiries please fax: 0049 (0)6897-509464 / E-Mail: [email protected] or contact yourregional sales office:
2
3
1
BLADDER ACCUMULATOR SPECIFICATION FORM (Page 4/4)