1 home b usiness i ndustry. 2 l ite 2gp-ip e thernet ip l ite 2gp gsm/gprs pstn sms ethernet pstn...
TRANSCRIPT
1
COMUNICATOR JR LITE-2GP
Your security in safe hands
HOME BUSINESS INDUSTRY
2
The Lite-2GP
LITE 2GP-IP
ETHERNET IP
LITE 2GPGSM/GPRS
PSTN
SMS
Ethernet
PSTN
Ethernet
GSM/GPRSPSTN
SMS
After an actualization
and preceding the
configuration, the JR
Lite-2GP communicator
is able to make the
bidirectionality by
GPRS or Ethernet with
any control panel of the
market with modulation
Bell 103 or V21, this
function is only
available from the 5.25
firmware version.
3
Features Phone communicator for alarm panel
Programming through the JR E-light software
2 zones + 2 outputs
SMS remote control
Bidirectionality with any other control panel on the market if you have the V21 or Bell 103. (DSC, Ademco,Honeywell, Paradox,Bosch, Risco, Network NX-8/NX-4, Texecom, Aritech,Pyronix or Napco).
The Lite-2GP range of ATS enable
to users to substitute a traditional
alarm systems with PSTN
communication by an IP base
and/or by a wireless network,
without have to improve or
change the alarm system.
The system ATS LITE2-G is the
only eauipment which, quickly
and cost-effectively, offer an
access to any alarm system to the
alternatif network, such as GSM,
GPRS et Ethernet.
4
Rules
The equipment was made to comply with all safety rules in accordance with the European directives :
2004/108/EC General directive of electromagnetic compatibility
2006/95/EC Directive of low tension.
99/5/CE Directive R&TTE
EN 60950-1 Equipement of information technology. Safety.
TBR21 Access to the PSTN.
EN 50 131-1 Grade 2
Requirements for intruder alarm systems.
EN301489-1 electromagnetic compatibility norms( CEM) for radioelectric equipments and services.
EN50136 Alarm transmission system.
5
Tecnicals features
DimensionsLength 5 cmWidth 11 cmDepth 5 cmweight(approximate) 200 g
Environmental class Class II
Operating Temperature de -10 à +40 C ̊
Operating Humidity 0…75% without condensation
Power card 9...15VDC - 500mA
Average consumptionPCB 45mAGSM Module 15mAEthernet Plug-in 40mAWith activated GSM calls 300mAWith input GSM calls + ringer 500mA
AntennaPerformance 2.15dBiFrequency 900/1800Mhz
Zone RFLNormal 2K2ΩTamper 820 Ω
Sorties (Collecteur ouvert)O1 Negative / 100mAO2 Negative / 100mA
6
Working mode for control panel
Control panel bidirectionality software: Makes a bidirectional connection request to the phone number of the control panel.
Com0com: forward this request to the Com2log Vmodem Server by its virtual ports COM.
Com2log Vmodem Server: receive the request.
Com2log Vmodem Server: communicate via the local network with the JR-Log-MCP to ask a connexion with the control panel which have this number.
1
2
3
4
7
JR-Log-MCP :Receive the request from the Com2log Vmodem Server.
JR-Log-MCP : Check in its data base the subscriber number corresponding to the telephone number required. When you will find the subscriber number, ask that the CS-LT-2G / CS-4G establish a direct bidirectional connexion with the software Com2log Vmodem server.
CS-LT-2G / CS-4G : Receive the request from the JR-Log-MCP.
CS-LT-2G / CS-4G : establish a bidirectional communication from the alarm central to the établit Com2log Vmodem Server.
Com2log Vmodem Server : receive the connexion from the CS-LT-2G / CS-4G. From there, the bidirectional connection is established between the alarm central of the user and the bidirectional software of the brand of the control panel.
5
6
7
8
9
8
Working mode for installers
9
Control panel bidirectionality software : Makes a bidirectional connection request to the phone number of the control panel.
Com0com: Forward this request to the Com2log Vmodem Server by its virtual ports COM.
Com2log Vmodem Server: receive the request.
Com2log Vmodem Server: communicate through internet with the JR-Log-MCP (situated in the control panel which make the maintenance of its facilities) to ask a connexion with the control panel which have this number.
Agent: Observes the window with the SMS request on the computer where the Com2log Vmodem Server is installed.
Agent: Sends the SMS requested to the phone number of the CS-LT-2G / CS-4G.
CS-LT-2G / CS-4G: Receive the request from the JR-Log-MCP.
CS-LT-2G / CS-4G: establish a bidirectional communication from the alarm central to the établit Com2log Vmodem Server.
Com2log Vmodem Server: receive the connexion from the CS-LT-2G / CS-4G. From there, the bidirectional connection is established between the alarm central of the user and the bidirectional software of the brand of the control panel.
1
2
3
4
5
6
7
8
9
10
C/ Rosselló 52-54E-08029 Barcelona, España
Telf. +34 934948440Fax. +34 934102221