11

Chang Shuan Eletronics Co., LtdChang Shuan Eletronics Co., Ltdhttp://www.csec.com.twhttp://www.csec.com.tw

http://www.adtek.com.twhttp://www.adtek.com.tw

22

CCS1 SERIES FAMILYS1 SERIES FAMILY

0.8” LED will be available on

Jun. 2007

33

CCS1 seriesS1 seriesCS1-VA Voltage / Current Meters 0~600V / 0~10A for DC/AC/TRMS

CS1-F Frequency Meters 0.01Hz~100KHz (Optional ~140KHz), 30~600Vp0.01Hz~100KHz (Optional ~140KHz), 30~600Vp

CS1-PR Linear Process Indicators 0~10V & 0(4)~20mA

CS1-SG Strain Gauge Indicators 1.0/2.0/4.0 ~ 10.0/20.0/40.0 mV/V

CS1-PM PotentioMeter Indicators 0~2.0K / 0~50.0K ohm ( 3 Wired)

CS1-RS Resistance Indicators 0.1~200/~2000/~20.0K/200.0K ohm (2 wired)

44

CCS1 seriesS1 seriesCS1-TP(C) Temperature Indicators Pt100 ohm / Thermocouple K,J,E,T,R,S,B.

CS1-RL Linear Speed / Rotation Indicators 0.01~100KHz /~140KHz (Optional) NPN / PNP / Contact / Vp

Features of CS1 Features of CS1 seriesseries

Option for 1 relay output, Analogue output or RS 485 Communication 1 relay output Hi / Lo / Hi.HLd / Lo.HLd / do Hi / Lo / Hi.HLd / Lo.HLd / do with Start Delay / Hysteresis / Energized & De-energized Delay / DO / with Start Delay / Hysteresis / Energized & De-energized Delay / DO / Relay Energized Hold….. Relay Energized Hold…..

Analogue outputAnalogue output Analogue High and Low settable as zoom-in functionAnalogue High and Low settable as zoom-in function Analogue output high limited functionAnalogue output high limited function

RS 485 portRS 485 port Address number 1~255, Baud Rate from 2400~38400 bpsAddress number 1~255, Baud Rate from 2400~38400 bps Showing data in display screen from Modbus RTU mode 06 functionShowing data in display screen from Modbus RTU mode 06 function

Display Present Value (PV) / Maximum or Minimum Hold / RS485 writing Present Value (PV) / Maximum or Minimum Hold / RS485 writing Low Cut, Average, Digital Filter, Scaling, Digital Fine adjustment…..Low Cut, Average, Digital Filter, Scaling, Digital Fine adjustment…..

1 relay output1 relay output Hi / Lo / Hi.HLd / Lo.HLd / doHi / Lo / Hi.HLd / Lo.HLd / do HiHi: High Limit Energized, when the PV >= Set-point: High Limit Energized, when the PV >= Set-point LoLo: Low Limited Energized , when the PV <= Set-point: Low Limited Energized , when the PV <= Set-point Hi.HLd (Lo.HLd): Hi.HLd (Lo.HLd): High (Low) Limit Energized continuously High (Low) Limit Energized continuously until manual reset by front key or External Control until manual reset by front key or External Control Input (ECI)Input (ECI) dodo: Relay energized according to the RS485 command : Relay energized according to the RS485 command

Hi or Lo Relay Energized Hi(Lo) Energized Hold & Reset

Hi Setting

Hi Relay Energized ON

Lo Setting

Lo Relay Energized ON

Hi Setting

Hi.HLd(High Hold) Relay Energized ON

Reset the relay Hold by ECI or Front Key

ON Level Trigger

88

Start Delay / Hystersis / Relay energized delay / Start Delay / Hystersis / Relay energized delay / Relay De-energized delayRelay De-energized delay Start DelayStart Delay Hysteresis: Settable range from Hysteresis: Settable range from 0~9999 Counts0~9999 Counts Relay energized delay: Settable range from Relay energized delay: Settable range from 00.1(second)~9(minutes)59.9(seconds);.1(second)~9(minutes)59.9(seconds); Relay de-energized delay: Settable range from Relay de-energized delay: Settable range from 0.1(second)~9(minutes)59.9(seconds)0.1(second)~9(minutes)59.9(seconds)

Start Delay Energized / De-energized Delay & Hysteresis

Start Delay Time

Start Band(SB)

Hi Setting

Relay Energized ON

Inhibit

Inhibit Hi Setting

Ener

gize

d de

lay

time

Relay Energized ON

Hysteresis

De-

ener

gize

d de

lay

time

Analogue outputAnalogue output Accuracy:Accuracy: ≦ ≦ 0.1% of F.S.; 0.1% of F.S.; Response time:Response time: 200 msec. (10~90% of input) ≦ 200 msec. (10~90% of input) ≦ Isolation:Isolation: AC 2.0 KV between input and output AC 2.0 KV between input and output Functions: Functions: Ao.Hi(output high):Ao.Hi(output high): PV Hi vs. output range Hi PV Hi vs. output range Hi Ao.Lo(output range Low):Ao.Lo(output range Low): PV Low vs. output range Lo PV Low vs. output range Lo Ao.LMt(output High Limit):Ao.LMt(output High Limit): 0.00~110.00% of output High0.00~110.00% of output High

SCALE Default: Ai.Lo: 0%, Ai.Hi: 100%; Lo.SC: 0.00, Hi.SC: 100.00 Change to Ai.Lo: 0%, Ai.Hi: 75%; Lo.SC: 0.00, Hi.SC: 199.99

0.00

199.99

100.00

0.00% 100.00% 50.00% INPUT 75.00% 0.00% 100.00% 50.00% OUTPUT

199.99

100.00

0.00

Setted Scaling: Lo.SC: 0.00, Hi.SC: 199.99; Desired Output: Ao.Lo: 50.00(PV), Ao.Hi: 150.00(PV)

50.00

150.00

SCALE

RS 485 port RS 485 port Modbus RTU ModeModbus RTU Mode Address: 1~255.Address: 1~255. Baud Rate: 1200 / 2400 / 4800 / 9600 / 19200 / 38400 selectable. Baud Rate: 1200 / 2400 / 4800 / 9600 / 19200 / 38400 selectable. Parity:Parity: Even / Odd / None parity, 8 data bits, 1 stop bit / None Even / Odd / None parity, 8 data bits, 1 stop bit / None parity, 8 data bits, 2 stop bit selectable.parity, 8 data bits, 2 stop bit selectable. Can read External Control Input (ECI) statusCan read External Control Input (ECI) status Can send the data to display screen by Modbus commandCan send the data to display screen by Modbus command

Flexible FunctionsFlexible Functions Field Calibration for CS1-SG / CS1-PM / CS1-RSField Calibration for CS1-SG / CS1-PM / CS1-RS

SpecificationSpecification CS1-VA Measuring: Vdc, Vac, Adc, Aac / 0~600V or 0~10AMeasuring: Vdc, Vac, Adc, Aac / 0~600V or 0~10A Accuracy: DC: ± 0.04%~0.1% F.S.± 1 count; Accuracy: DC: ± 0.04%~0.1% F.S.± 1 count; AC: ± 0.1%~0.1% F.S.± 1 count AC: ± 0.1%~0.1% F.S.± 1 count Display: -19999~29999, 0.56” high bright LEDDisplay: -19999~29999, 0.56” high bright LED

CS1-FCS1-F Measuring: 0~100KHz(140KHz max.), Decimal Point auto setMeasuring: 0~100KHz(140KHz max.), Decimal Point auto set Accuracy: ± 0.005% F.S. ± 1 count Accuracy: ± 0.005% F.S. ± 1 count Display: 0~99999, 0.56” high bright LED Display: 0~99999, 0.56” high bright LED Input mode: NPN / PNP / Vp changeable by Dip Switch on rear terminal Input mode: NPN / PNP / Vp changeable by Dip Switch on rear terminal blockblock

CS1-PRCS1-PR Measuring: 0~(5)10Vdc & 0(4)~20mAdc All in oneMeasuring: 0~(5)10Vdc & 0(4)~20mAdc All in one Accuracy: ± 0.04%~0.1% F.S.± 1 countAccuracy: ± 0.04%~0.1% F.S.± 1 count Display: -19999~29999, 0.56” high bright LEDDisplay: -19999~29999, 0.56” high bright LED

1212

SpecificationSpecification CS1-SG Measuring: Measuring: 0~1.0/~2.0/~4.0/~10.0/~20.0/~40.0mV/V specify0~1.0/~2.0/~4.0/~10.0/~20.0/~40.0mV/V specify Accuracy: ± 0.04%~0.1% F.S.± 1 count Accuracy: ± 0.04%~0.1% F.S.± 1 count Display: -19999~29999, 0.56” high bright LEDDisplay: -19999~29999, 0.56” high bright LED

CS1-PMCS1-PM Measuring: Measuring: 0.0~2.0KΩ/~100.0KΩ (3 wired)0.0~2.0KΩ/~100.0KΩ (3 wired) Accuracy: ± 0.04% F.S. ± 1 count Accuracy: ± 0.04% F.S. ± 1 count Display: -19999~29999, 0.56” high bright LED Display: -19999~29999, 0.56” high bright LED

CS1-RSCS1-RS Measuring: Measuring: 0.1~200Ω/~2000Ω/~20.0KΩ/~200.0KΩ (2 wired)0.1~200Ω/~2000Ω/~20.0KΩ/~200.0KΩ (2 wired) Accuracy: ± 0.04% F.S. ± 1 count Accuracy: ± 0.04% F.S. ± 1 count Display: -19999~29999, 0.56” high bright LED Display: -19999~29999, 0.56” high bright LED

1313

SpecificationSpecification CS1-TP(C)CS1-TP(C)Measuring: Measuring: Pt100Ω (3 wired) / Thermocouple K,J,E,T,R,S,B..Pt100Ω (3 wired) / Thermocouple K,J,E,T,R,S,B.. Accuracy: Accuracy: Pt100Ω:Pt100Ω: ± 0.1% F.S. ± 1 count ± 0.1% F.S. ± 1 count Thermocouple K,J,E,T: Thermocouple K,J,E,T: ± 0.2% F.S. ± 1 count ± 0.2% F.S. ± 1 count Thermocouple R,S,B: Thermocouple R,S,B: ± 0.3% F.S. ± 1 count± 0.3% F.S. ± 1 count Display: -19999~29999, 0.56” high bright LED Display: -19999~29999, 0.56” high bright LED

CS1-RLCS1-RL Measuring: 0~100KHz(140KHz max.), Measuring: 0~100KHz(140KHz max.), Decimal Point auto setDecimal Point auto set Accuracy: ± 0.005% F.S. ± 1 count Accuracy: ± 0.005% F.S. ± 1 count Display: 0~99999, 0.56” high bright LED Display: 0~99999, 0.56” high bright LED Input mode: NPN / PNP / Vp changeable by Dip Switch on rear terminal Input mode: NPN / PNP / Vp changeable by Dip Switch on rear terminal blockblock