1 captive media november 2011 briefing for venues installation information captive media
TRANSCRIPT
2CAPTIVE MEDIA
Installation
• Each unit is connected via two cables ducted from the back of the casing and through the wall panel into the wall space
• 12v DC for power – via a power adaptor (safely secured) to a metal clad, RCD protected socket
• Cat 5e data cable for internet connectivity – to an internet router (all cables numbered at both ends)
• All in line with current NIC EIC regulations and Cat5e standards.
• The site self-survey will establish the most suitable connection points and appropriate cable runs, which will be hidden wherever possible.
• It will also confirm whether any pre-work is required (e.g. to hide cables where not wall cavity exists, or where a non-standard urinal is in place – see next page). Installation quotations are based on the site survey. At your request Captive Media can conduct the site survey.
• Captive Media works with a long-established, national IT installation company to ensure the install is done to spec, and to guarantee service cover, with remote monitoring, 24/7 helpdesk and next-day call-out. They can also audit your existing IT infrastructure, if you choose.
• No on-site commissioning is required. The units will start to play games and PTV content as soon as they are connected.
• A typical 3 or 4 unit install is complete within a day – all that is required is uninterrupted access to the washrooms and any areas for cable runs.
Wall space
Cat
5 d
ata
cabl
e
12 v
DC
Isolated, wall mounted ‘power brick’
~ 240v ACMains connection point:
20 A RCD Switched Spur
Internet connection point
3CAPTIVE MEDIA
5 – point installation requirement checklist
Wall mounting and clearance
1. Clearance from downpipes from cistern. See photos, left (otherwise re-routing of pipework may be required)
Cabling 2. Wall cavity behind urinal in which to run cabling out to power brick
3. Clear Cable runs to mains and internet connection points
Electrical connection
4. 20 amp radial or 32 amp ring main supply according to the number of units required, within 10 metres of units
Data Connection 5. Single Ethernet / RJ45 connection socket into which Cat 5 Cabling can be run within 25 metres of units
5 ticks? We’re all set!
5CAPTIVE MEDIA
Technical Specifications
Unit Dimensions • 297 x 288m
Approx Weight • Approx 2.5 kg
Power • 240VAC 35W supply, 12v DC supplied to unit
• Power consumption 30-50W : screens can be put to sleep out of hours
Data Connectivity • Networked via Cat 5 cable connection to local internet router
• Bandwidth requirements minimal: score upload, periodic overnight updating of media files
Safety • EMC certified and CE marked
Dust & Moisture • IP 65
Ruggedisation • Toughened Glass fascia and white acrylic capped ABS casework