1 cable suspension - static.griplocksystems.com · type 10 grippers for 1/32” - 1mm cable page 11...
TRANSCRIPT
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®1
VOLUMEXX
CABLE SUSPENSIONLIGHTING APPLICATIONS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®1
About Griplock Systems Page 3-4
Powered Suspension Systems Page 5-6
Griplock Architectural Kits - Power Feed Page 7
Griplock Architectural Kits - Non-Power Feed Page 8
Griplock Industrial Kits Page 9-10
Type 10 Grippers for 1/32” - 1mm Cable Page 11
Type 12 Grippers for 1/32” - 3/64” Cable Page 12
Type 15 Grippers for 3/64” - 1/16” Cable Page 13-16
Type 18 Grippers for 1/16” - 5/64” Cable Page 18
Type 25 Grippers for 1/16” - 2.5mm Cable Page 19-20
Type 30 Grippers for 3/32” - 1/8” Cable Page 21
Track Lighting Systems Page 22
Sputnik Grippers Page 23
Strut Grippers Page 24
Ring Grippers Page 24
Hook Grippers Page 25
Fork Grippers Page 26
Power Feed Grippers Page 27
Cable Stays Page 27
Seismic Bracing System Page 28
Cable Couplers - Fixed & Adjustable Page 29-30
Griplock Cables & Terminals Page 31-32
Tethers Page 33
Power Cords Page 34
Ceiling Canopies & Accessories Page 35
Ceiling Attachments & Hardware Page 36
Installation Guidelines Page 37
Weight Load Guidelines Page 38
Griplock Systems, LLC
TABLE OF CONTENTSCABLE SUSPENSION SYSTEMS
793 Duncan Reidville Rd.Duncan, SC 29334
1029 Cindy LaneCarpinteria, CA 93013
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®2
Portable Fuse Cutter
A Better Way To Cut Aircraft Cable!
Cut and fuse aircraft cable in secondsPortable - Affordable - Easy field use
Select diameter of cables Cut and Fuse aircraft cable Automatically CleansCuts aircraft cable sizes: 1/32” – 1/16”Works with standard 110Vac
Set includes:1x Portable Fuse Cutter1x Electrical Control Box1x Automatic Cleaner1x Pair of Gloves
See how it works!
1x Pair of Safety Glasses2x Safety Shields1x Extra Brush1x Plastic Tool Box
®
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®3
Cable
Plunger
Ball bearings
SpringPressure plate
Gripper housing
Cable
Ball bearing
GRIPLOCK® SYSTEMS
Griplock designs, engineers, manufactures and distributes adjustable and fixed cable suspension systems for use in the lighting, retail display, art display, suspended ceiling, trade show, rigging and defense industries. Since 1992 Griplock has provided manufacturers and contractors with the broadest selection of the highest quality, most reliable cable suspension products in the world.
Griplock’s products include grippers, cable couplers, aircraft cable, ceiling canopies, power cords, accessories and an exclusive line of powered suspension systems.
GRIPLOCK® GRIPPERS
The cable gripper is a fully adjustable cable suspension device for use with 7x7 and 7x19 aircraft cable only. It automatically locks anywhere on the cable and can be moved up or down at the touch of a button. As shown in the drawings,the three ball bearings sit in three of the six grooves on the circumference of the cable so the pressure on the cable is evenly distributed.
As a result, the gripper holds about 60% of the published break strength of the cable. Griplock recommends a 5:1 safe working load (SWL) based upon that 60%. This makesthe gripper the fastest, strongest and simplest way to suspend lighting and other fixtures.During the last 20 or so years, the aircraft cable / gripper combination has become thepreferred pendant lighting suspension system by manufacturers and installers worldwide.
The Griplock Gripper is precision built to our own specifications. We closely monitor quality, and batch-test every shipment received. We continually refine the gripping mechanism to produce better results.
GRIPLOCK® PREMIUM AND ZF STANDARD GRIPPERS
Arguably the finest grippers available, Premium grippers combine an immense range ofapplications with a beautiful finish and extraordinary holding power.
Lower cost ZF Standard grippers are competitively priced for use in industrial and architecturallighting applications. ZF Standard grippers are built to our specifications and receivefull quality assurance testing at our facility. Part numbers are in green, eg. ZF-15ZZ.
Griplock® Systems recommends a lower safe working load (SWL) for ZF Standardgrippers than its Premium products. See page 38.
WHERE IT STOPS, IT LOCKS® Griplock Grippers. Sophisticated in design, simple to use:
• Insert the cable through the plunger into the gripper mechanism. Slide the gripper to the desired position.
• To re-adjust, depress the plunger with your fingertip and move the gripper to a new position. Release the plunger to lock.
• The 3- or 6-ball gripping mechanism is spring-loaded and allows the gripper to move freely UP the cable. The gripper cannot move DOWN the cable unless the plunger is depressed.
• An optional safety nut or safety cap can be added to completely lock the mechanism in both directions. See examples on page 15.
ABOUT GRIPLOCK® SYSTEMSTHE ART OF SUSPENSION®
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®4
GRIPLOCK® CABLE
Griplock cable assemblies are available in 7x7 or 7x19 galvanized or stainless, medium-to-high tensile strength aircraft cable. These assemblies are factory fitted with a variety of die-cast zinc, swaged aluminum, swaged copper or swaged steel terminals. Unless specified, Griplock terminals are guaranteed to the full published break-strength of the cable, however, when used in conjunction with grippers, cables will have a break strength that is less than the break strength of the cable alone. Please refer to the Installation and Weight Load Guidelines on pages 37 and 38. In all cases Griplock recommends a STATIC safe working load (SWL) of no more than 1/5 of the minimum break strength of the gripper / cable combination.
GRIPLOCK® ARCHITECTURAL (GA) SUSPENSION KITS Griplock provides a full line of cable suspension kits for the architectural lighting market. See pages 7 and 8. GA kits are not supplied with grippers. Please see the following pagesfor the appropriate gripper for your application.
GRIPLOCK® INDUSTRIAL (GI) SUSPENSION KITS
GI kits are supplied with Griplock’s ZF Standard grippers. These competitively priced industrial kits are shown on pages 9 and 10. Call, email or go online for our Griplock Industrials catalog.
CUSTOM DESIGNS, ENGINEERING & SERVICE
Any combination of Griplock products can be assembled, packaged and labeled according to your specifications. You may supply your own parts and instruction material for inclusion in your kits. Pricing is usually lower than the cost of individual components purchased “a la carte”. SolidWorks drawings of customer kits are available at no charge. Griplock engineering and sales staff are ready to help you in your selection of cables, couplers and grippers. If you still can’t find the part you need, we can design and build it for you.
QUALITY & SAFETY
Suspending pendant fixtures safely is Griplock’s highest priority. Improper installation and/or the wrong choice of components can have devastating consequences. Griplock’s reputation is built on safety, quality, customer service and over 20 years of experience. Our customers know that we stand squarely behind our products.
Griplock’s quality control system is modeled after ISO 9001. Prior to assembly, all individual Griplock Gripper components are tested randomly to meet Griplock’s high QC standards.
GA
GI
ABOUT GRIPLOCK® SYSTEMSTHE ART OF SUSPENSION®
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®5
Single Conductor Powered Suspension System
Ideal for linear fixtures, light boxes, or multi-pendant LED fixtures requiring multiple suspensions.
RINCON®• Sku: ASC-17• 1/16” cable• 40 lbs SWL per suspension*• Stainless Steel w/ Copper Core†
RINCON®+ Plus• Sku: ACCS-16• 1/16” cable• Less Resistance• Reduced Voltage Drops• 20 lbs SWL per suspension*
RINCON® HD• Sku: ASC-24• 3/32” cable• 100 lbs SWL per suspension*• Stainless Steel w/ Copper Core†
Bento LED Pendant © Hubbardton Forge
† U.S. Patent Nos. 8,807,780; 8,403,519;Taiwan Patent No. I474344; China Patent No. 102741942;European Patent No. 2504845; other patents pending
POWERED SUSPENSION SYSTEMSPOWER OVER CABLE
CORDFREE™ TECHNOLOGY• FOR USE WITH REMOTE CLASS 2 DRIVERS
ELEGANT DESIGN• NO BULKY POWER CORDS NEEDED• FIXTURES HAVE A CLEAN, MODERN LOOK
EASY FIELD INSTALLATION• LABOR-SAVING TOOL-FREE INSTALLATION• QUICKLY ADJUST AND RE-ADJUST TO ANY
HEIGHT
STANDARD SYSTEM INCLUDES:• 2 X CONDUCTIVE CABLES• 2 X CEILING ASSEMBLY HARDWARE• 2 X FIXTURE ASSEMBLY HARDWARE• 2 X INSULATING SLEEVES• INSTRUCTION SHEET
CABLE SPECS:• 7×7 STRANDED• 1/16” (1.6MM) OR 3/32” (2.4MM)
AVAILABLE CABLE LENGTHS:• STANDARD – 48”, 120”, 180” OR 240”• CUSTOM LENGTHS AVAILABLE UPON RE-
QUEST
Standard System is sold “as is” and must beincorporated into the product development &production process. Modifications require aminimum order of (100+) Kits.
* SWL (Safe working loads) are 20% of the minimumbreak strength of the gripper / cable combinationRincon®+ is not currently UL recognized.
An Engineered Solution
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®6POWERED SUSPENSION SYSTEMS
POWER OVER CABLE
Adjustable CableGripper Assembly
Adjustable CableGripper
Ceiling Cap(Holds Canopy Up)
1/16" Stainless Steel/Copper Core
Conductive Suspension Cables
Electrical Connector
PVC Insulating Sleeve
Plastic Bushings
Ceiling Canopies&
Bracket Bars
Fixture Hardware Assembly (Fixed)
Fixture Electrical Leads(One Positive & One Negative Per Fixture)
Transformer Remote Class 2(For Fixture A) Class 2 Voltage Out To
Junction Box (-/+)
Line Voltage In
Transformer Remote Class 2(For Fixture B)
Line Voltage In
Linear ExampleChoose adjustment at fixture or ceiling
Option 1 Option 2
G-ASC17-T832-xxxRINCON®
G-ACCS16-T832-xxxRINCON®+ Plus
G-ASC17-KFBT-xxxRINCON®
G-ACCS16-KFBT-xxxRINCON®+ Plus
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®7
SCALE:
FILE:
DATE:
410 Palm Ave. Loft A18, Carpinteria, CA 93013Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMSG-AG16-SL-PF183-xxx
1:1This drawing and these specifications are the exclusive property ofGRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,copied, or used as the basis for the manufacture or sale of apparatuswithout the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
POWER FEED KITS P/N examples
3/64” galvanized cable GA-AG12-PF182-xxx1/16” galvanized cable GA-AG16-PF184-xxx5/64” galvanized cable GA-AG20-PF185-xxx3/32” galvanized cable GA-AG24-PF183CB-xxx 1/16” stainless steel cable GA-AS16-PF183-xxxCord & canopy in black GA-AG16-PF183B-xxx
POWER FEED KITS FOR VAULTED CEILINGS P/N examples
3/64” galvanized cable GA-AG12-SL-PF183-xxx 1/16” galvanized cable GA-AG16-SL-PF123-xxx 5/64” galvanized cable GA-AG20-SL-PF143-xxx3/32” galvanized cable GA-AG24-SL-PF144-xxx 1/16” stainless steel cable GA-AS16-SL-PF183-xxx Cord & canopy in black GA-AG16-SL-PF183B-xxx
1 x cable tie per ft.
2 x bushings to match cord & PF holes
Power cord to match cable length + 6”
1/4-20 sloped ceiling coupler
5” canopy 0.25” center hole
Power cord to match cable length + 6”
1/4-20 slipring coupler
1 x cable tie per ft.
2 x bushings to match cord & PF holes
Bracket bar with1/4-20 x 1” stud
5” canopy 0.41” center hole
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
Bracket bar with1/4-20 x 1” stud
3/64”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
GA
Typical power cords:
18/2 SVT white (PF182)
18/2 SVT black (PF182B)
18/3 SVT white (PF183)
18/3 SVT black (PF183B)
The lettering in red shows how a power cord could appear in the part number of the GA kit you want to order. There’s a list of available power cords on page 34, but there isn’t room on this page to
list each one. However, Griplock’s customer service can create a GA kit containing any available cord in the standard lengths shown at the top of this page.
18/3 SJT clear braided (PF183CB)
18/4 AWM white (PF184)
18/4 AWM black (PF184B)
18/4 SJT clear braided (PF184CB)
Grippers are NOT supplied with these kits. Please see following pages for the appropriate gripper for your application. Cables are available in galvanized (AG) or stainless steel (AS).
xxx = Cable length in inches Stock lengths: 24”, 48”, 96”, 120”, 150”, 180” & 240”
16/3 SJT white (PF163)
14/3 SJT white (PF143)
14/3 SJT black (PF143B)
14/4 SJT white (PF144)
GRIPLOCK® ARCHITECTURALPOWER FEED KITS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®8
NON-FEED KITS P/N examples
3/64” galvanized cable GA-AG12-Q5-xxx1/16” galvanized cable GA-AG16-Q5-xxx 5/64” galvanized cable GA-AG20-Q5-xxx 3/32” galvanized cable GA-AG24-Q5-xxx 1/16” stainless steel cable GA-AS16-Q5-xxx Canopy in black GA-AG16-Q5B-xxx
NON-FEED KITS FOR VAULTED CEILINGS
P/N examples
3/64” galvanized cable GA-AG12-SL-Q5-xxx1/16” galvanized cable GA-AG16-SL-Q5-xxx 5/64” galvanized cable GA-AG20-SL-Q5-xxx 3/32” galvanized cable GA-AG24-SL-Q5-xxx 1/16” stainless steel cable GA-AS16-SL-Q5-xxx Canopy in black GA-AG16-SL-Q5B-xxx
P/N examples
3/64” galvanized cable GA-AG12-Q2-xxx1/16” galvanized cable GA-AG16-Q2-xxx 5/64” galvanized cable GA-AG20-Q2-xxx 3/32” galvanized cable GA-AG24-Q2-xxx 1/16” stainless steel cable GA-AS16-Q2-xxx Canopy in black GA-AG16-Q2B-xxx
2” canopy 0.25” center hole
1/4-20 coupler
Bracket bar with1/4-20 x 1” stud
5” canopy 0.25” center hole
1/4-20 sloped ceiling coupler
1/4-20 sloped ceiling coupler
5” canopy 0.25” center hole
P/N examples
3/64” galvanized cable GA-AG12-SL-Q2-xxx1/16” galvanized cable GA-AG16-SL-Q2-xxx 5/64” galvanized cable GA-AG20-SL-Q2-xxx 3/32” galvanized cable GA-AG24-SL-Q2-xxx 1/16” stainless steel cable GA-AS16-SL-Q2-xxx Canopy in black GA-AG16-SL-Q2B-xxx
2” canopy 0.25” center hole
Bracket bar with1/4-20 x 1” stud
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
3/16”, 1/16”, 5/64” or 3/32” galvanized or stainless cable
1/4-20 coupler
GAGrippers are NOT supplied with these kits. Please see following pages for the appropriate gripper for your application.
Cables are available in galvanized (AG) or stainless steel (AS). xxx = Cable length in inches Stock lengths: 24”, 48”, 96”, 120”, 150”, 180” & 240”
GRIPLOCK® ARCHITECTURALNON-POWER FEED KITS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®9 Gi
ZZPushmepullyu gripper
CEILING ATTACHMENTS
FIXTURE ATTACHMENTS
15ZGripper w/ 1/4-20 int. thread
FIXTURE ATTACHMENTS
TGToggles
GHKSnap-hooks
CC1/4-20 cable coupler
44Loop
TGToggles w/ X-cable gripper
TGToggle
GHKSnap-hook
Y-CABLES
ZZ Adjustableloop-maker
aka Pushmepullyu
TGToggles fit 1/4” - 5/16”
dia. openings
15ZThreads to
1/4-20 ceiling studs, etc.
GHK Snap-hookfor 1/4” eye
GI-16Yxx-ZZ-TG-xxx2 assys. per kit.
GI-16XCxx-44-TG-xxx2 assys. per kit.
ZZ
xx
xxx
44
xx/2
xxx
X-CABLESX-cable (XC)
gripper has a thumb screw to lock off the X-cable
X-cable overall length xx = 2 x actual leg length
Y-CABLE KITS
GI-16Yxx-ZZ-TG-xxxGI-16Yxx-15Z-TG-xxxGI-16Yxx-ZZ-GHK-xxxGI-16Yxx-15Z-GHK-xxx
xx = leg length: 12” & 24”xxx = overall length: 60”, 120”, 180” & 240”
X-CABLE KITS
GI-16XCxx-44-TG-xxxGI-16XCxx-CC-TG-xxxGI-16XCxx-TG-TG-xxxGI-16XCxx-GHK-TG-xxx
xxx = overall length: 60”, 120”, 180” & 240”xx = total X-cable length: 12”, 24”, 36” & 48”
Actual leg length = 1/2 of X-cable length
CEILING ATTACHMENTSX-CABLES
GRIPLOCK® INDUSTRIALCOST-EFFECTIVE HIGH-BAY KITS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®10Gi
CEILING ATTACHMENTS
FIXTURE ATTACHMENTS
CC1/4-20 cable coupler
44Loop
GHKSnap-hook
TGToggle
15ZGripper w/ 1/4-20 int. thread
CEILING AND FIXTURE ATTACHMENTSSINGLE CABLES
V-CLIP CABLES
CC1/4-20 cable coupler
44Loop
GHKSnap-hook
TGToggle
HX-VCLIP-SMSide mount v-clip
HX-VCLIP-TMTop mount v-clip
GI-AG16-15Z-TG-xxx2 assys. per kit.
GI-AG16-V-44-xxx2 assys. per kit.
xxx
44
DIM A
ZF-15Z-1420iCeiling Gripperw/ 1/4-20 Internal Thread
1/16" Galvanized7x7 Cable
Toggle Plate for0.25" Opening
Cable Terminal
Can be usedinversely
GI-AG16-15Z-TG-xxxSingle Cable w/ Ceiling Gripper & Toggle
2 ASSYS. PER KIT
BULK PACKAGING AVAILABLE
DIM AGRIPLOCK P/N60"GI-AG16-15Z-TG-60
120"GI-AG16-15Z-TG-120180"GI-AG16-15Z-TG-180240"GI-AG16-15Z-TG-240
SCALE:
FILE:
DATE:
1132 Mark Avenue, Carpinteria, CA 93013Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMSGI-AG16-15Z-TG-xxx
1:2This drawing and these specifications are the exclusive property ofGRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,copied, or used as the basis for the manufacture or sale of apparatuswithout the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
xxx
15Z
TG
SINGLE CABLE KITS
Single cable systems can be used inversely:
GI-AG16-15Z-44-xxxGI-AG16-15Z-CC-xxxGI-AG16-15Z-TG-xxxGI-AG16-15Z-GHK-xxx
GI-AG16-ZZ-44-xxxGI-AG16-ZZ-CC-xxxGI-AG16-ZZ-TG-xxxGI-AG16-ZZ-GHK-xxxxxx = overall length: 60”, 120”, 180” & 240”
SINGLE CABLE KITS
GI-AG16-V-44-xxxGI-AG16-V-CC-xxxGI-AG16-V-TG-xxxGI-AG16-V-GHK-xxx
xxx = overall length: 60”, 120”, 180” & 240”
V-CLIPSNot supplied with kits but available from Griplock.
DIM A
ZF-15Z-1420iCeiling Gripperw/ 1/4-20 Internal Thread
1/16" Galvanized7x7 Cable
Toggle Plate for0.25" Opening
Cable Terminal
Can be usedinversely
GI-AG16-15Z-TG-xxxSingle Cable w/ Ceiling Gripper & Toggle
2 ASSYS. PER KIT
BULK PACKAGING AVAILABLE
DIM A GRIPLOCK P/N60" GI-AG16-15Z-TG-60
120" GI-AG16-15Z-TG-120180" GI-AG16-15Z-TG-180240" GI-AG16-15Z-TG-240
SCALE:
FILE:
DATE:
1132 Mark Avenue, Carpinteria, CA 93013Phone (805) 566-0064 Fax (805) 566-0065
www.griplocksystems.com
GRIPLOCK SYSTEMSGI-AG16-15Z-TG-xxx
1:2This drawing and these specifications are the exclusive property ofGRIPLOCK SYSTEMS LLC and shallnot be divulged, reproduced,copied, or used as the basis for the manufacture or sale of apparatuswithout the express written authorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
ZZPushmepullyu gripper
GRIPLOCK® INDUSTRIALCOST-EFFECTIVE HIGH-BAY KITS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®11 TYPE 10 GRIPPERS
10Z-832iSide exit gripper.8-32 int. thread
10Z-M4-SL1.1Slotted cross-cable
gripper.M4 set screw included
10-M6-ATAll-thread gripper.
M6 x 1 thread
10-M6-KFT-T2Top flange gripper.
M6 x 1 thread
1/32” / 1mm aircraft cable
10-M6-KFT Gripper
Fluxwerx LED Lighting Fixture
Our thinnest cable system yet!
10ZG-832e-315Jointed side exit gripper.
8-32 x 0.315” thread
10ZG-832iJointed side exit gripper.
8-32 int. thread
1/32” & 1MM CABLE APPLICATIONS
Griplock’s smaller Type 10 and Type 12 grippers, used in conjunction with 1/32”, 1mm, and 3/64” aircraft cable, are perfect for the new lightweight LED fixtures now coming to market.
Lightweight Cable Suspension System
10Z-M4iSide exit gripper. M4 int. thread
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®12
12Z-M4OR-SL1.6Slotted cross-cable gripper.M4 thumb screw included
12-M8-KFB-RRReverse release gripper.
M8 x 1 thread.Cable releases at base
ZF-12-M8-KFTTop flange gripper.
M8 x 1 thread
ZF-12-NT-RRReverse release gripper.
No thread.Cable releases at base
ZF-12X2Looping gripper.Reverse release
12-M8-KFTTop flange gripper.
M8 x 1 thread.12-M8-KFT-S
w/ safety nut
12-M8-ATAll-thread gripper.M8 x 1.25 thread.12-M8-AT-Sw/ safety nut
12Z-M4iSide exit gripper.
M4 x 0.7 int. thread
12-K12Spherical gripper.12mm diameter
1/32” / 1mm aircraft cable
TYPE 12 GRIPPERS1/32” - 3/64” CABLE APPLICATIONS
12-M4eBottom exit gripper.
M4 ext. thread
Pathway Lighting
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®13 TYPE 15 GRIPPERS
3/64”- 1/16” CABLE APPLICATIONS
15-18IP-KFTTop flange gripper.
1/8 IPS thread.15-18IP-KFT-S-T2
w/ safety nut
15-18IP-AT All-thread gripper.
1/8 IPS thread
15-1420-T2Standard gripper.
1/4-20 steel thread.15-1420-SC-T2
w/ safety cap
15-1032-T2Standard gripper.10-32 steel thread
15-18IP-AT-1 All-thread gripper.1/8 IPS x 1” thread
15-18IP-LITO-SC Flat flange gripper.
1/8 IPS thread.w/ safety cap
15-14IP-AT-T2 All-thread gripper.
1/4 IPS thread
15-14IP-KFT-T2Top flange gripper.
1/4 IPS thread.15-14IP-KFT-S-T2
w/ safety nut
Prudential Lighting
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®14
15Z-832i-SC-T28-32 int. thread.
See page 22
15Z-832i-SC-T2Side exit gripper.
8-32 int. thread w/ safety cap
15Z-1420e-276-T2Side exit gripper.
1/4-20 x 0.276” thread
15Z-1420e-394-T2Side exit gripper.
1/4-20 x 0.394” thread
15Z-1032e-R-42Side exit gripper.
10-32 x 0.33” thread
15Z-1420i-T2Side exit gripper.1/4-20 int. thread
15Z-M6R-Q2.3Through-hole cross-cable gripper.
M6 thumb screw included.15Z-M6R-Q2.3-SC
w/ safety cap
15Z-M6R-SL2.3 Slotted cross-cable gripper.M6 thumb screw included
15Z-1420i-KF-SSide exit gripper w/ key flats.
1/4-20 int. thread.w/ safety nut
15-38IP-KFT-STop flange gripper.
3/8 IPS thread.w/ safety nut
15-14IP-KFC-T2Center flange gripper.
1/4 IPS thread
15-14IP-KFBBase flange gripper.
1/4 IPS thread
TYPE 15 GRIPPERS3/64”- 1/16” CABLE APPLICATIONS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®15
DG-15Z-TC-300-SATSide exit clevis gripper 0.30” slot.
Satin chrome finish.10-32 set screw included
15Z-Q1032Side exit gripper.
10-32 horizontal thread.Fastener NOT included
15Z-GA-T2Side exit clevis gripper 0.15” slot.
10-32 set screw included
15ZG-1420e-315Jointed side exit gripper. 1/4-20 x 0.315” thread
15ZG-1420iJointed side exit gripper.
1/4-20 int. thread
15-K18Spherical gripper.18mm diameter
15-M6-RRReverse release gripper.M6 x 1 thread at top.
E-ring included.Cable releases at base
15-K18-RRReverse release spherical gripper.
Cable releases at base.18mm diameter
15-NT-KFBBase flange gripper.
No thread.E-ring included
15Z-1420e-SCCSlimline gripper.1/4-20 thread.
15-B20Base flange gripper.
No thread
TYPE 15 GRIPPERS3/64” - 1/16” CABLE APPLICATIONS
15-14IP-AT-SAll thread gripper.
1/4 IPS thread.w/ safety nut.
15-14IP-AT-T2w/o safety nut
15-14IP-KFT-S-1Top flange gripper.
1” x 1/4-18 NPSM thread.w/ safety nut
15ZG-M4IJointed side exit gripper.
M4 int. thread
ZF-15Z-1420e-394Side exit gripper.
1/4-20 x 0.394” ext. thread
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®16
0.36"
1.81"
3/64" & 1/16" Cable
75lbs max. 40lbs max.
GRIPLOCK SYSTEMSPROPRIETARY AND CONFIDENTIAL
410 Palm Ave. Loft A18, Carpinteria, CA93013Phone (805) 566-0064 Fax (805) 566-0065
Dual Gripper for 3/64"ZF-15ZZ
& 1/16" 7x7 or 7x19 Cable06/29/05
GRIPLOCK SYSTEMSThis drawing and these specifications are the exclusive property of GRIPLOCK SYSTEMS LLC.and shall not be divulged, reproduced, copied,or used as the basis for the manufacture or saleof apparatus without the express writtenauthorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
410 Palm Ave. Loft A18, Carpinteria, CA93013Phone (805) 566-0064 Fax (805) 566-0065
SCALE:
MATERIAL:
PART NUMBER:
REF:
FILE:
NICKEL PLATED BRASS1:1 ZF-15ZZ rB c
DESCRIPTION:DATE:
ZF-15Z-VCV-clip gripper.See page 10
ZF-15-1420-SCStandard gripper.
1/4-20 steel thread.w/ safety cap.ZF-15-1420
w/ out safety cap
ZF-15-18IP-KFT-STop flange gripper.
w/ safety nut
ZF-15Z-1420iSide exit gripper.1/4-20 int. thread
ZF-15ZZPushmepullyu gripper.
See pages 9 & 10
75 lbs max. 50 lbs max.When Pushmepullyu is used to join
1/16” cables IN SERIES, safe working load is reduced to 50 lbs.
See weight charts on page 38
ZF-15Z-XCCross-cable gripper.
M6 thumb screw included. See pages 9 & 10
ZF-15Z-M6-Q5.5-T2Balance bar gripper.
M6 set screw included
ZF-15ZG-832iJointed side exit gripper.
8-32 int.thread
ZF-15Z-JU-1420iUniversal jointed side exit gripper.
1/4-20 int. thread
ZF-15Z-JU-1420e-315Universal jointed side exit gripper.
1/4-20 x 0.315” thread
ZF-15-14IP-KFTTop flange gripper.
1/4 IPS thread
ZF-15-38IP-KFT-R-STop flange gripper.
3/8 IPS thread.w/ safety nut
ZF-15-18IP-KFT-RRTop flange gripper. Reverse release.1/8 IPS thread
TYPE 15 GRIPPERS3/64”- 1/16” CABLE APPLICATIONS
ZF-15Z-832iSide exit gripper.8-32 int. thread
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®17 TYPE 15 GRIPPERS
1/64” - 1/16” CABLE APPLICATIONS
DLC LumiSheet
®
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®18
18Z-1420iSide exit gripper.1/4-20 int. thread
18ZG-1420e-315Jointed side exit gripper.1/4-20 x 0.315” thread
18Z-1420e-440Side exit gripper.
1/4-20 x 0.44” thread
18Z-M10eSide exit gripper.M10 x 1 thread
18ZG-1420iJointed side exit gripper.
1/4-20 int. thread
ZF-18Z-XCCross cable gripper.
w/ knurled thumb screw
ZF-18Z-1420eS-394Side exit gripper.
1/4-20 x 0.394” thread.ZF-18Z-1420eS-440
Side exit gripper.1/4-20 x 0.44” thread
ZF-18Z-1420iSide exit gripper.
1/4-20 thread
ZF-18Z-JU-1420iUniversal jointed side exit gripper.
1/4-20 int. thread
ZF-18Z-JU-1420e-315Universal jointed side exit gripper.
1/4-20 x 0.315” thread
TYPE 18 GRIPPERS1/16” - 5/64” CABLE APPLICATIONS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®19
DG-25-BUL-KFB-SATBase flange gripper.
Detachable base plate. Satin chrome finish.
w/ safety cap
ZF-25Z-1420R-Q3.0-SCThrough hole cross-cable gripper.1/4-20 thumb screw included.
w/ safety cap
ZF-25-14IP-KFT-STop flange gripper.
1/4 IPS thread.w/ safety nut.
5/64” - 2.5mm only
25Z-1420i-T2Side exit gripper.1/4-20 int. thread
25Z-M10eSide exit gripper.
M10 thread
25-14IP-KFT-STop flange gripper.
1/4 IPS thread.w/ safety nut
25-14IP-ATAll thread gripper.
1/4 IPS thread
25-38IP-ATAll thread gripper.
3/8 IPS thread.25-38IP-AT-S
w/ safety nut
25-38IP-KFTTop flange gripper.
3/8 IPS thread.25-38IP-KFT-S
w/ safety nut
25GSwivel gripper.
w/ mounting plate.Safe Working Load: 95 lbs. for 3/32”.
All other cables, refer toPremium Gripper Chart
25Z-M6-SL3.0-SSlotted cross-cable gripper.
M6 set screw included.w/ safety nut
25-B5Side-mount gripper.
#8 wood screw included
TYPE 25 GRIPPERS1/16”- 2.5MM CABLE APPLICATIONS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®20
ZF-25-14IP-KFB-SCBottom flange gripper.
1/4 IPS thread.w/ safety cap.
5/64” - 2.5mm only
ZF-25-12IP-KFT-R-SKnurled top flange gripper.
1/2 IPS thread.w/ safety nut.
5/64” - 2.5mm only
ZF-25-38IP-KFT-R-SKnurled top flange gripper.
3/8 IPS thread.w/ safety nut.
5/64” - 2.5mm only
ZF-25-38IP-KFT-STop flange gripper.
3/8 IPS thread.w/ safety nut.
5/64” - 2.5mm only
TYPE 25 GRIPPERS1/16”- 2.5MM CABLE APPLICATIONS
Prudential Lighting
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®21
30-M16-ATAll-thread gripper.M16 x 1.0 thread.3-ball mechanism
30Z-JU-3816i-V6-SUniversal Jointed side exit gripper.
3/8-16 int. thread.6-ball mechanism.
w/ safety nut
30-3816e-V6-SStandard gripper.
3/8-16 thread.6-ball mechanism
w/ safety nut
30Z-1420i-V6-SSide exit gripper.1/4-20 int. thread.6-ball mechanism.
w/ safety nut
30Z-M6-V6-Q3.5-SThrough-hole cross-cable gripper.
6-ball mechanism.M6 set screw included.
w/ safety nut
30-K23Spherical gripper.3-ball mechanism.23mm diameter
ZF-30X2Looping gripper.Reverse release
30Z-3816i-V6-SCSide cable exit gripper,
6-ball mechanism.3/8-16 internal thread.
w/ safety nut
TYPE 30 GRIPPERS3/32”- 1/8” CABLE APPLICATIONS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®22
Track Lighting Kits can use any number of various Power Feed and Non-Feed Architectural Kits. The Stabilizing Rod (SR) for tracklighting, an 8” nickel-plated stem that screws down onto the threaded plunger of our track-suspension gripper, can be added to any kit. The Stabilizing Rod locks down the cable-gripping mechanism and helps leverage an off-balance track back to its correct position.
Kits & Grippers for Cable Suspended Track Lighting.
Any combination of the parts shown below can be offered as a kit. Kits shown below are examples only.
xxx = cable lengths: 60”, 120”, 180” & 240”
15Z-832-SR-8Gripper with 8” stabilizing rod
& 8-32 int. thread.8-32 bolt included
Typical lighting track(by others)
Cable coupler (CC)
15Z-832i-T2Gripper only.8-32 bolt available
8” x M4 threadedstabilizing rod (SR)
15Z-832i-SC-T2 Gripper w/ M4 threaded plunger
8-32 bolt
GI-16TRK-SR-GHK-xxxSnap-hook, 1/16” galv. cable, 8” rod, gripper & 8-32 bolt. 2 assys. per kit
GI-16TRK-CC-xxxCable coupler, 1/16” galv. cable,gripper & 8-32 bolt. 2 assys. per kit.
GI-16TRK-44-xxxLooped 1/16” galv. cable,gripper & 8-32 bolt. 2 assys. per kit
Looped cable (44)
Snap-hook (GHK)
8-32 bolt
TRACK LIGHTING SYSTEMSTYPICAL TRACK LIGHTING EXAMPLES
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®23
Sputniks are available in three sizes and come in 3 and 4 cable versions. They accept a range of primary and secondary cable sizes. Cables not included. See chart below.
15-SPT3Sputnik gripper.
3 secondary cables25-SPT3
30-SPT3
15-SPT4Sputnik gripper.
4 secondary cables25-SPT4
30-SPT4
Primary cable
Secondary cables
15ZG-1420iJointed gripper.
For 3/64” - 1/16” cable.see page 15
P/N PRIMARY CABLE SECONDARY CABLES (x=# of secondary cales)
ZF-15-SPTx 3/64” - 1/16” 3/64” - 1/16” ZF-25-SPTx 1/16” - 3/32” 3/64” - 1/16” 15-SPTx 3/64” - 1/16” 3/64” - 1/16” 25-SPTx 1/16” - 3/32” 3/64” - 1/16” 30-SPTx 3/32” - 1/8” 1/16” - 5/64”
ZF-15-SPT3ZF-25-SPT3Sputnik gripper
3 secondary cables
ZF-15-SPT4ZF-25-SPT4Sputnik gripper
4 secondary cables
SPUTNIK GRIPPERSSINGLE SUSPENSION GRIPPER WITH STABILIZING CABLES
ZF-15Z-JU-1420iUniversal Jointed gripper. For 3/64” - 1/16” cable.
see page 16
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®24
ZF-30-STRUT-RR Reverse release allows height adjustment
from above and below.
Cable is inserted though the top and is released from above or below.
Strut
Lock nut
Pull down to release
ZF-15-RIRing gripper.
For 3/64” - 1/16” cable
18-RIRing gripper.
For 3/64” - 1/16” cable.18-RI-S
w/ safety nut
15-RIRing gripper.
For 3/64” - 1/16” cable.15-RI-S
w/ safety nut
30-RI-V6B-SRing gripper.
For 3/32” - 1/8” cable.6-ball mechanism.
Black zinc plated w/ safety nut.30-RI-V6-SNickel plated
RINGS
STRUT GRIPPER3/32” - 1/8” CABLE APPLICATIONS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®25
ZF-15Z-1420-GHASnap-hook gripper.
For 3/64” - 1/16” cable
18-HASnap-hook gripper.
For 3/64” - 5/64” cable.18-HA-S
w/ safety nut
18Z-1420-GHASnap-hook gripper.
For 3/64” - 5/64” cable
15Z-1420-GHASnap-hook gripper.
For 3/64” - 1/16” cable
15-HASnap-hook gripper.
For 3/64” - 1/16” cable. 15-HA-S
w/ safety nut
RT-15-HASnap-hook gripper.
For 3/64” - 1/16” cable.Safe Working Load:
refer to ZF Standard Chart
25Z-1420-GHASnap-hook gripper.
For 1/16” - 3/32” cable
30Z-1420-V6-GHASnap-hook gripper.
For 3/32” - 1/8” cable.6-ball mechanism.
w/ safety nut
10-HAMicro hook gripper.
For 1/32” - 1mm cable
15-GHA-BSnap-hook gripper.
For 3/64” - 1/16” cable.Black chrome plated.
15-GHASnap-hook gripper.
Nickel plated
HOOK GRIPPERS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®26
The fork dimensions are called out in the part number, eg. 15-FORK-8X16. See below:
25-FORK-6x12-SCFork gripper.
For 1/16” - 3/32” cable.w/ safety cap
30-FORK-10x20-V6B-SFork gripper.
For 3/32” - 1/8” cable.6-ball mechanism.
Black zinc plated w/ safety nut.30-FORK-10x20-V6-S
Nickel plated
10-FORK-4.3x8Fork gripper.
For 1/32” - 1mm cable
12-FORK-5x10Fork gripper.
For 1/32” - 3/64” cable
15-FORK-6x12Fork gripper.
For 3/64” - 1/16” cable
15-FORK-8x16Fork gripper.
For 3/64” - 1/16” cable
15-FORK-6x24Fork gripper.
For 3/64” - 1/16” cable
15-FORK-8x16Example
8mm / .31”
16mm / .63”
FORK GRIPPERS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®27
15-38IP-PF-SAccepts cord up to 0.42” in diam.
3/8 IPS locknut included.For 3/64” - 1/16” cable.
w/ safety nut.15-38IP-PFw/o safety nut.25-38IP-PF
For 1/16” - 3/32” cable.25-38IP-PF-S
w/ safety nut
15-14IP-PF-SAccepts cord up to 0.325” in diam.
1/4 IPS locknut included.For 3/64” - 1/16” cable
w/ safety nut.15-14IP-PFw/o safety nut
15-18IP-PF-SAccepts cord up to 0.25” in diam.
1/8 IPS locknut included.For 3/64” - 1/16” cable.
w/ safety nut.15-18IP-PFw/o safety nut
15-M10-PFAccepts cord up to 0.25” in diam.
2 x M10 locknuts included.For 3/64” - 1/16” cable.
15-M13-PFAccepts cord up to 0.325” in diam.
2 x M13 locknuts included
ZF-15-M10-PFAccepts cord up to 0.25” in diam.
2 x M10 locknuts included.For 3/64” - 1/16” cable.ZF-15-14IP-PF-S
Accepts cord up to 0.325” in diam.1/4 IPS locknuts included.For 3/64” - 1/16” cable.
w/ safety nutZF-25-12IP-PF-S
Accepts cord up to 0.42” in diam.2 x 1/2 IPS locknuts included.
For 5/64” - 2.5mm cable.w/ safety nut
HF-STAY-xFor 1/32” - 1mm cable.
Power cord ≤ 0.25”
HF-STAY-M4-xM4 set-screw included.
For ≤ 5/64” cable.Power cord ≤ 0.30”
Power feed housing lets the power cord enter the fixture through the
same KO as the gripper.
CABLE STAYS
x = w white b black g gray c clear
POWER FEED GRIPPERS & CABLE STAYS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®28
System 2: Longitudinal and lateral 3/32” cables run from wall to wall, intersecting each other and vertical cables asclose to the fixture as possible. Use the CC-UNICROSS at these intersections. Use an adjustable gripper at either end of the 3/32” bulk cable.
Use 25Z-M13-1420-SL gripper and coupler combo for cables that run perpendicular to wall surfaces. Use 25Z-1420-GHA gripper and snap-hook combo for all wall surfaces and all angles.
3/32” lateral cable
CC-UNICROSS Locks any two cables at any angle.
3/32” longitudinal cable
Typical linear fixture
Vertical suspension cables
25Z-1420-GHA
Option:25Z-M13-1420-SL combo at each endof 3/32” cable for 90° wall / cable interface
25Z-1420-GHASnap-hooks to eye-bolt at any angle.
Eye-bolt (by others)attaches to structure.
During a seismic event, forces can quickly build up that may cause a lighting fixture to tear loose from its ceiling mountings. The Griplock Seismic Bracing System is designed to limit such movement, not prevent it altogether. The Griplock Seismic Bracing System conforms to California Building Code regulations.
System 1: A single 3/32” cable locks to existing vertical cables via the CC-UNICROSS, running up at a 45° angle to attach to eye-bolts at the ceiling structure via the 25Z-1420-GHA.
GRIPLOCK SYSTEMSThis drawing and these specifications are the exclusive property of GRIPLOCK SYSTEMS INC.and shall not be divulged, reproduced, copied,or used as the basis for the manufacture or saleof apparatus without the express writtenauthorization of GRIPLOCK SYSTEMS INC.
PROPRIETARY AND CONFIDENTIAL
410 Palm Ave. Loft A18, Carpinteria, CA93013Phone (805) 566-0064 Fax (805) 566-0065
SCALE:
MATERIAL:
PART NUMBER:
REF:
FILE:
N/A1:10 Seismic Assy 45 Fixture Rows
Seismic Bracing to CeilingDESCRIPTION:DATE: 06/29/07
CC-UNICROSS Locks any two cables at any angle.
25Z-1420-GHASnap-hooks to eye-bolt at any angle. Eye-bolt by others
GRIPLOCK SYSTEMSThis drawing and these specifications are the exclusive property of GRIPLOCK SYSTEMS INC.and shall not be divulged, reproduced, copied,or used as the basis for the manufacture or saleof apparatus without the express writtenauthorization of GRIPLOCK SYSTEMS INC.
PROPRIETARY AND CONFIDENTIAL
410 Palm Ave. Loft A18, Carpinteria, CA93013Phone (805) 566-0064 Fax (805) 566-0065
SCALE:
MATERIAL:
PART NUMBER:
REF:
FILE:
N/A1:10 Seismic Assy 45 Fixture Rows
Seismic Bracing to CeilingDESCRIPTION:DATE: 06/29/07
SEISMIC / SWAY BRACING SYSTEM
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®29
CC-M82-part cable coupler.For ≤ 1/16” cable.Use w/ #6 screw
CC-M10-14202-part cable coupler.For ≤ 5/64” cable. 1/4-20 int. thread
CC-M13-1420-Q2.42-part cable coupler.For ≤ 5/64” cable. 1/4-20 int. thread.
CC-M13-1420-Q3.5For 3/32” - 1/8” cable
CC-1420-ELP2-part cable coupler.For ≤ 3/32” cable. 1/4-20 int. thread
CC-1420-SL2.1Sloped ceiling coupler.For 1/16” - 5/64” cable.
1/4-20 int. thread.
CC-1420-SL4.4Sloped ceiling coupler.
For ≤ 1/8” cable.1/4-20 int. thread.
w/ ball insert
CC-SL2.1-SRSloped ceiling
slipring coupler.For ≤ 5/64” cable. 1/4-20 int. thread
CC-1420-T2Cable coupler.
For cable ≤ 3/32”.1/4-20 int. thread
CC-18IPCable coupler.
For cable ≤ 3/32”.1/8 IPS int. thread
CC-2 2-part cable coupler.
For cable ≤ 3/32”
CC-1420Cable coupler.
For cable ≤ 3/32”.1/4-20 int. thread
CC-18IP-SRSlipring coupler.
For cable ≤ 3/32”.1/4-20 int. thread
US Patent 6,761,342 B1
CC-3816Cable coupler.
For cable ≤ 3/32”.3/8-16 int. thread
CC-1420-SL3.0-T2For 5/64” - 3/32” cable.
w/ half ball insert
FIXED CABLE COUPLERSFLAT AND SLOPED CEILING APPLICATIONS
CC-18IP-SR-KF-RSlipring coupler.
Knurled RingFor cable ≤ 3/32”.1/4-20 int. thread
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®30
15Z-M10-1420-SL2-part gripper.
For 3/64” - 1/16” cable. 1/4-20 int. thread
12Z-M8-SL 2-part gripper.
For 1/32” - 3/64” cable.Use w/ #6 screw
25Z-M13-1420-SL2-part gripper.
For 1/16” - 3/32” cable. 1/4-20 int. thread.
See page 28
15Z-1420-ELP-T22-part gripper.
For 3/64” - 1/16” cable. 1/4-20 int. thread
12-BS-1420Sloped ceiling gripper
For 3/64” cable.1/4-20 int. thread
15-BS-1420Sloped ceiling gripper.For 3/64” - 1/16” cable.
1/4-20 int. thread
CC-M8-Q2.4Through hole cross-cable
connector.For ≤ 5/64” cable
CC-M8-SL2.4Slotted cross-cable
connector.For ≤ 5/64” cable
ADJUSTABLE CEILING GRIPPERSFLAT AND SLOPED CEILING APPLICATIONS
Cross-Cable Connectors
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®31
STOCK CABLE SIZES: 3/64”, 1/16”, 5/64”, and 3/32” unless noted.STOCK CABLE LENGTHS: 24”, 48”, 96”, 120”, 150”, 180”, and 240” unless noted.STOCK CABLE TYPE: 7x7 galvanized and 304 stainless unless noted. 1/8” and up: 7x19.
NON-STOCK CABLE: If cables in non-stock lengths and/or with non-stock terminals are available then we will ship them immediately at no extra charge. If they need to be manufactured there may be a lead time of several weeks, depending on the type and quantity. For cables that need to be cut down to a specific non-stock length there will be a charge for the next available stock length up, in addition to a $1.00 cutting charge. A custom cable set-up charge may also be imposed.
Please consult us for more information on swaged and zinc die cast terminals. Many more are available than can be shown here. Custom designs are also available. Cables are made exclusively of medium-to-high tensile strength aircraft cable.
80Ball terminal.
For 1mm & 3/64” stainless cable. 0.19” diameter.
3/64” & 1.5mm Galvanized/Stainless STOCK1mm Galvanized STOCK
87 Barrel terminal.
For 3/64” - 5/64” cable.0.19” diameter.
STOCK
01Swaged barrel terminal.
For 3/32” cable.0.19” diameter
TGToggle plate.
For 3/64” - 5/64” cable.STOCK
15T-terminal.
For 1/16” cable.0.35” flange diameter
0.145” shank diameter
93 Ball terminal.
For 1/32” - 1/8” cable.Various diameters
97 Barrel terminal.
For 1/32” - 5/64” cable.0.19” diameter
91Single shank ball terminal.
For 3/64” - 1/8” cable.Various diameters
CABLES & TERMINALS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®32
1420CC1/4-20 stud.
For ≤ 3/32” cable.ASSEMBLED PER ORDER
44Loop
For 1/16” galv. cable.STOCK.
Other cable types & sizes are available
45Loop / thimble.
Available for all cable sizes
99GStake-eye.
All cable sizes.99S
Stainless stake-eye99EC
Stamped copper eye
GHCCSnap-clip.
For ≤ 3/32” cable.ASSEMBLED PER ORDER
GHK Small snap-clip.
60”, 120”, 180” & 240” For 1/16” galvanized cable.
STOCK
CABLES & TERMINALS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®33
TETHERS
This page shows examples of some of the many tethers we produce. A small selection of tethers are available in stock. Most tethers are customized per project. Smaller orders can be processed in 1-2 weeks. Larger orders of 1,000 pieces or more may require a 8-10 week lead time. They can beexpedited for a small add-on fee, cutting the time for receiving down to 6 weeks. Larger ordersrequiring a shorter lead time can be expedited with a 1-3 week lead time at a higher cost. Smallorders of 100 or less may incur a set up charge and additional fees.
The weight loads for tethers can range from 10 lbs to several hundred. Just give us a call or send us a drawing so we can help you determine your requirements.
WEIGHT LOADS
Swaged stainless or zinc plated
steel eyeStamped copper eye
1mmstainless steel cable
3/64”stainless steel cable
Die cast term.w/ toggle
1/4-20 threaded stud Stamped copper eye
Swaged steel eye
Swaged loop Snap-clip
Swagedsteel eye
Swaged loop Stamped copper eye
Swaged loop Swaged loop Swagedsteel eye
Tethers can be of any material but the cable itself is always 7x7 galvanized or stainless steel, and can also be offered with plastic-coating. Please refer to pages 31-32 for all available cable terminals. Please call Griplock’s customer service for quotes.
EXAMPLES
SAFETY TETHERS
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®34
Cords are available in bulk, blunt-cut to length, or stripped one or both ends. Call us if you don’t see what you’re looking for.• Unless Gray & Violet specified, 5th and/or 6th conductor colors may vary.• We carry a number of cords with gray and violet control wires. Look for GV in our part number• We carry a number of 600v cords. Look for the (600v) designation. Griplock supplies HEYCO strain
relief bushings CORD JACKET CONDS. GRIPLOCK P/N
CORD PF HOLE BUSHING P/NSDIA. DIA. WHITE BLACKTYPE
12/3 SJT BLK. WHT, BLK, GRN. ES-123-SJT-B
12/3 SJT WHT. WHT, BLK, GRN. ES-123-SJT-W
12/3 STO WHT. WHT, BLK, GRN. (600v) ES-123-STO-W-HV
12/4 SJT BLK. WHT, BLK, GRN, RED. ES-124-SJT-B
12/4 SJT WHT. WHT, BLK, GRN, RED. ES-124-SJT-W
12/5 SJT WHT. WHT, BLK, GRN, RED, BL. ES-125-SJT-W
14/3 SJT BLK. WHT, BLK, GRN. ES-143-SJT-B
14/3 SJT WHT. WHT, BLK, GRN. ES-143-SJT-W
14/3 ST WHT. WHT, BLK, GRN. (600v) ES-143-ST-W-HV
14/4 SJT BLK. WHT, BLK, GRN, RED. ES-144-SJT-B
14/4 SJT WHT. WHT, BLK, GRN, RED. ES-144-SJT-W
14/4 ST WHT. WHT, BLK, GRN, RED. (600v) ES-144-ST-W-HV
16/3 SJT WHT. WHT, BLK, GRN. ES-163-SJT-W
18/2 SVT BLK. WHT, BLK. ES-182-SVT-B
18/2 SVT WHT. WHT, BLK. ES-182-SVT-W
18/2 SVT BLK. GRY, VLT. ES-182-SVT-GV-B
18/2 SVT CLR. BRD. GRY, VLT. ES-182-SVT-GV-CB
18/2 SVT WHT. GRY, VLT. ES-182-SVT-GV-W
18/3 SJT BLK. WHT, BLK, GRN. ES-183-SJT-B
18/3 SJT CLR. BRD. WHT, BLK, GRN. ES-183-SJT-CB
18/3 SJT WHT. WHT, BLK, GRN. ES-183-SJT-W
18/3 SJT GRY. WHT, BLK, GRN. ES-183-SJT-G
18/3 ST BLK. WHT, BLK, GRN. (600v) ES-183-ST-B-HV
18/3 ST WHT. WHT, BLK, GRN. (600v) ES-183-ST-W-HV
18/3 SVT BLK. WHT, BLK, GRN. ES-183-SVT-B
18/3 SVT WHT. WHT, BLK, GRN. ES-183-SVT-W
18/4 AWM BLK. WHT, BLK, GRN, RED. ES-184-AWM-B
18/4 AWM WHT. WHT, BLK, GRN, RED. ES-184-AWM-W
18/4 SJT BLK. WHT, BLK, GRN, RED. ES-184-SJT-B
18/4 SJT CLR. BRD. WHT, BLK, GRN, RED. ES-184-SJT-CB
18/4 SJT WHT. WHT, BLK, GRN, RED. ES-184-SJT-W
18/5 AWM BLK. WHT, BLK, GRN, GRY, VLT. (600v) ES-185-AWM-GV-B-HV
18/5 AWM WHT. WHT, BLK, GRN, GRY, VLT. (600v) ES-185-AWM-GV-W-HV
18/5 AWM GRY. WHT, BLK, GRN, GRY, VLT. (600v) ES-185-AWM-GV-G-HV
18/5 SJT BLK. WHT, BLK, GRN, RED, OR. ES-185-SJT-B
18/5 SJT BLK. WHT, BLK, GRN, GRY, VLT. ES-185-SJT-GV-B
18/5 SJT CLR. BRD. WHT, BLK, GRN, RED, OR. ES-185-SJT-CB
18/5 SJT CLR. BRD. WHT, BLK, GRN, GRY, VLT. ES-185-SJT-GV-CB
18/5 SJT WHT. WHT, BLK, GRN, GRY, VLT. ES-185-SJT-GV-W
18/5 SJT WHT. WHT, BLK, GRN, RED, OR. ES-185-SJT-W
18/6 SJT WHT. WHT, BLK, GRN, RED, GRY, VLT. ES-186-SJT-GV-W
18/6 SJT WHT. WHT, BLK, GRN, RED, OR, BL. ES-186-SJT-W
*18/3-22/2 AWM2586 WHT. WHT, BLK, GRN, GRY, VLT. (600v) ES-183/222-GV-W
*18/3-22/2 AWM2586 BLK. WHT, BLK, GRN, GRY, VLT. (600v) ES-183/222-GV-B
*18/3-22/2 AWM2586 CLR. BRD. WHT, BLK, GRN, GRY, VLT. (600v) ES-183/222-GV-CB
* 3 Power Conductors (WHT, BLK, GRN) are 18 Gauge / 2 Control Wires (GRY, VLT) are 22 Gauge
0.45” 0.875” SR-1498-W SR-1497-B
0.45” 0.875” SR-1498-W SR-1497-B
0.57” 1.125” SR-1288-W SR-1287-B
0.50” 0.875” SR-1255-W SR-1254-B
0.50” 0.875” SR-1255-W SR-1254-B
0.57” 1.125” SR-1288-W SR-1287-B
0.38” 0.875” SR-1248W SR-1247-B
0.38” 0.875” SR-1248-W SR-1247-B
0.56” 0.875” SR-1248-W SR-1247-B
0.45” 0.875” SR-1498-W SR-1497-B
0.45” 0.875” SR-1498-W SR-1497-B
060” 0.875” SR-1288-W SR-1287-B
0.36” 0.630” SR-1200-W SR-1201-B
0.25” 0.500” SR-1151-W SR-1150-B
0.25” 0.500” SR-1151-W SR-1150-B
0.25” 0.500” SR-1151-W SR-1150-B
0.27” 0.625” SR-1201-W SR-1200-B
0.25” 0.500” SR-1151-W SR-1150-B
0.31” 0.625” SR-1201-W SR-1200-B
0.33” 0.625” SR-1201-W SR-1200-B
0.31” 0.625” SR-1201-W SR-1200-B
0.31” 0.625” SR-1201-W SR-1200-B
0.40” 0.875” SR-1248-W SR-1247-B
0.40” 0.875” SR-1248-W SR-1247-B
0.26” 0.500” SR-1151-W SR-1150-B
0.26” 0.500” SR-1151-W SR-1150-B
0.29” 0.625” SR-1201-W SR-1200-B
0.29” 0.625” SR-1201-W SR-1200-B
0.36” 0.625” SR-1201-W SR-1200-B
0.38” 0.875” SR-1248-W SR-1247-B
0.36” 0.625” SR-1201-W SR-1200-B
0.37” 0.875” SR-1248-W SR-1247-B
0.37” 0.875” SR-1248-W SR-1247-B
0.37” 0.875” SR-1248-W SR-1247-B
0.40” 0.875” SR-1248-W SR-1247-B
0.40” 0.875” SR-1248-W SR-1247-B
0.40” 0.875” SR-1248-W SR-1247-B
0.40” 0.875” SR-1248-W SR-1247-B
0.40” 0.875” SR-1248-W SR-1247-B
0.40” 0.875” SR-1248-W SR-1247-B
0.43” 0.875” SR-1498-W SR-1497-B
0.43” 0.875” SR-1498-W SR-1497-B
0.27” 0.625” SR-1201-W SR-1200-B
0.27” 0.625” SR-1201-W SR-1200-B
0.29” 0.625” SR-1201-W SR-1200-B
POWER CORDSCanopies and Bushings
Griplock Systems has UL approval for processing and respooling power cord.
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®35
STOCK CEILING CANOPIES - WHITE IS UV RESISTANT POWDER COAT
GRIPLOCK P/N COLOR OD CTR. HOLE PF DIA.
Q2-14-B BLK. 2” 0.25”
Q2-14-W WHT. 2” 0.25”
Q2-410-W WHT. 2” 0.41”
Q5-W WHT. 5” None
Q5-14-B BLK. 5” 0.25”
Q5-14-B-875X2 (PFx2) BLK. 5” 0.25”
Q5-14-W WHT. 5” 0.25”
Q5-14-W-500 WHT. 5” 0.25”
Q5-14-W-625 WHT. 5” 0.25”
Q5-14-W-625X2 (PFx2) WHT. 5” 0.25”
Q5-14-W-875 WHT. 5” 0.25”
Q5-14-W-875X2 (PFx2) WHT. 5” 0.25”
Q5-410-B-625 BLK. 5” 0.41”
Q5-410-B-875 BLK. 5” 0.41”
Q5-410-B-875X2 (PFx2) BLK. 5” 0.41”
Q5-410-W WHT. 5” 0.41”
Q5-410-W-1125 WHT. 5” 0.41”
Q5-410-W-500 WHT. 5” 0.41”
Q5-410-W-500X2 (PFx2) WHT. 5” 0.41”
Q5-410-W-625 WHT. 5” 0.41”
Q5-410-W-625X2 (PFx2) WHT. 5” 0.41”
Q5-410-W-875 WHT. 5” 0.41”
Q5-410-W-875X2 (PFx2) WHT. 5” 0.41”
Q5-500-W WHT. 5” 0.50”
Q5-625-W-625 WHT. 5” 0.63”
None
None
None
None
None
0.88”
None
0.50”
0.63”
0.63”
0.88”
0.88”
0.63”
0.88”
0.88”
None
1.13”
0.50”
0.50”
0.63”
0.63”
0.88”
0.88”
None
0.63”
CABLE GROMMET Cable grommets let the cable pass cleanly through ceiling tile and other materials up to 5/8”. Finished in nickel.
Tile
CC-1420-CGLocknut & washer
includedCC-1420-CG-SATSatin-nickel finish
REVISIONS
REV. DESCRIPTION DATE
GRIPLOCK SYSTEMSThis drawing and these specifications are the exclusive property of GRIPLOCK SYSTEMS LLC.and shall not be divulged, reproduced, copied,or used as the basis for the manufacture or saleof apparatus without the express writtenauthorization of GRIPLOCK SYSTEMS LLC.
PROPRIETARY AND CONFIDENTIAL
1132 Mark Ave., Carpinteria, CA 93013Phone (805) 566-0064 Fax (805) 566-0065
SCALE:
MATERIAL:
PART NUMBER:
REF:
FILE:1:1 ceiling tile cover asm
DESCRIPTION:DATE:DRAWN BY REV
CHECKED BYINT
Unless otherwise specified1. Dimensions are in millimeters2. Tolerances are: All Dimensions .125 Angles 13. Break all edges .125 min4. Finish 1.6 micro millimeters5. Dimensions apply after finish6. Concentricity = .6 TIR
1.00
Q2-14-W
Q5-410-W-625
Q5-14-W
CEILING CANOPIES & ACCESSORIES
CC-632-Q2.9Clamps to cable <3/32” holds 0.25” ctr. hole canopy to tile ceiling
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®36
HX-T-CLIP-BA1Wrap-around T-bar clip.
1/4-20 x 5/8” stud
HX-T-CLIP-BA-4-16-W “Twist-on” T-bar clip.
1/4-20 x 5/8” stud
HX-T-CLIP-BAX-4-16Scissor T-bar clip.1/4-20 x 5/8” stud
HX-T-CLIP-Q6-WT-bar clip for hook attachment.
0.23” hole diameter.See page 32 for gated hooks
HX-T-CLIP-KEY-WT-bar clip for ball terminal.
See page 31 for 80 or 93 terminal
BB-1420-1Bracket bar for 4” J-box.
1/4-20 stud included BB-1420
No Stud
TL-CUTTERFelco-type cable cutter.
Cuts ≤ 1/8” cable
CEILING ATTACHMENTS
BB-14IPBracket bar for 4” J-box.
1/4 IPS hollow stud included
BB-UNIVERS-685IDBracket bar for 4” J-box
BB-18IPBracket bar for 4” J- box.
1/8 IPS hollow stud included
CEILING ATTACHMENTS & HARDWARE
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®®37
If this is the first time you’ve worked with Griplock Grippers, PLEASE READ THE FOLLOWING INFORMATION CAREFULLY.
INSTRUCTIONS FOR USEThe information in the charts on page 38 is not applicable to any other cable gripping product. Use of Griplock supplied cables is assumed. Weight loadguidelines and other specifications are for illustration purposes only. They should not be construed as a warranty that the product or system will conform. Each purchaser is solely responsible for determining (1) that the product and/or system is suitable for the intended application and (2) that the product and/or system complies with all federal, state and local safety and trade laws and regulations. End-users are cautioned that the integrity of the structures to which these components are attached and the fasteners used to attach them are critical to the integrity of the overall system and should therefore be evaluated by a qualified engineer or installer.
• Use only 7x7 or 7x19 uncoated galvanized or stainless steel aircraft cable.
• When feeding cable through a gripper always allow cable to pass 1” beyond the gripper mechanism. When cutting excess cable always leave 1/2” of cable showing. Cable should be cut using purpose-built cutters as shown on page 36.
• Cable will not fray when cut unless passed repeatedly through the gripper mechanism or otherwise overworked. In this case trim the cable and apply a drop of super-glue.
• DO NOT ATTEMPT TO RUN AN ELECTRICAL CURRENT THROUGH THESE CABLES. Use a separate power cord. For information on the Rincon® Powered Suspension System see page 5.
• DO NOT FEED EXCESS CABLE INTO A FIXTURE HOUSING OR J-BOX CONTAINING ELECTRICAL WIRING.
• Adhere strictly to the Weight Load Guidelines on page 38. Use only gripper / cable combinations for which a safe working load (SWL) has been specified, e.g. 1/16” cable with a Type 15 gripper.
• The Griplock system is generally not recommended for permanent outdoor installations. It should not be exposed to wind or water or allowed to oscillate continuously. Avoid placing fixtures in chemical-laden environments such as indoor swimming pools (for more information on these applications please call our office). Do not place unbraced fixtures close to HVAC vents where they may be exposed to continual air currents. If in any doubt consult a Griplock engineer or sales representative.
ANGLED APPLICATIONS
• Cables should not enter or exit grippers at more than a 5° angle (see illustration at right).
• A pendant load exerts greater force on angled / non-vertical cables than it would on vertical cables.
• To determine the safe working load on an angled cable supporting a load, take the safe working load for the gripper / cable combination from the weight load chart on page 38 and multiply it by the factor from the chart below. For example, for a 1/16” galvanized cable with type 25 Premium gripper at a 45° angle, take the 60 lbs from the weight load chart on page 38 and multiply it by 0.70 from below: 60 lbs x 0.70 = 42 lbs. So 42 lbs will be the safe working load for each suspension at a 45° angle instead of 60lbs for a vertical suspension. Angles beyond 60° are not recommended.
For more information about this please call our office.
ANGLE FROM VERT. 0° 15° 30° 45° 60°
FACTOR 1 0.96 0.86 0.70 0.50
THREAD AND KNOCK OUT (KO) SIZESTHREAD SIZE THREAD DIA. KO SIZE THREAD SIZE THREAD DIA. KO SIZE
1/8IPS = 1/8-27 3/8” 7/16”
1/4IPS = 1/4-18 1/2” 9/16”
3/8IPS = 3/8-18 5/8” 11/16”
1/2IPS = 1/2-14 13/16” 7/8”
10-32 0.19” 3/16”
1/4-20 0.24” 1/4”
3/8-16 0.38” 7/16”
M4 5/32” 3/16”
M8 5/16” 3/8”
M10 3/8” 7/16”
M13 1/2” 9/16”
M16 5/8” 11/16”
5° max.deviationfrom center line
INSTALLATION GUIDELINES
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
®38
CABLE DIAMETER PREMIUM GRIPPER TYPE
Inches mm Type 10 Type 12 Type 15 Type 18 Type 25 Type 30 Type 30
3-Ball 3-Ball 3-Ball 3-Ball 3-Ball 3-Ball 6-Ball
Safe Working Load in Pounds - 7x7 or 7x19 Galvanized & Stainless Steel Cable 15 / 13 15 / 13
1.0mm 22 / 20 22 / 20
1.2mm 33 / 28 33 / 28 33 / 28
1.6mm 60 / 50 60 / 50 60 / 50
2.0mm 80 / 70 80 / 70
2.4mm 126 / 110 126 / 110 126 / 110
2.5mm 134 / N/A 134 / N/A 134 / N/A
3.2mm 200 / 180
3.2mm 225 / 200
STATIC SAFE WORKING LOADS (SWL) FOR GRIPLOCK® PREMIUM GRIPPERS Safe working loads are 20% of the minimum break strength of the gripper / cable combination
Values in BLACK are for galvanized cables. Values in BLUE are for stainless steel cables.
*Figures in these two columns denote Pushmepullyu Grippers and the ZF-30X2 looping gripper when used in a looped configuration. For all other configurations see regular ZF Standard weightload figures.
CABLE DIAMETER ZF STANDARD GRIPPER TYPEInches mm Pushmepullyu* Type 12 Type 15 Type 18 Type 25 Type 30 X2 Loop-it*
ZF-15ZZ 3-Ball 3-Ball 3-Ball 3-Ball 3-Ball ZF-30X2
Safe Working Load in Pounds - 7x7 or 7x19 Galvanized & Stainless Steel Cable
STATIC SAFE WORKING LOADS (SWL) FOR GRIPLOCK® ZF STANDARD GRIPPERS Safe working loads are 20% of the minimum break strength of the gripper / cable combination
Values in BLACK are for galvanized cables. Values in BLUE are for stainless steel cables.
• USE CORRECT WEIGHTLOAD CHART. Griplock’s ZF Standard Grippers (see 2nd chart) can be indentified by the CF marking on the gripper. They have a lower SWL than Griplock Premium Grippers (see 1st chart).
• The 5:1 SWL reflects the US Lighting Industry standard. Where no SWL is shown, grippers and cables are not compatible.
• Charts indicate the SWL for gripper / cable combinations when used with 7x7 or 7x19 steel core, uncoated galvanized or stainless steel aircraft cable. Do not use plastic coated cable.
• Charts apply to Griplock Premium or ZF Standard Grippers only. They are not applicable to any other cable gripping product.
PROPRIETARY AND CONFIDENTIAL: The drawings and specifications contained in this publication are the exclusive property of Griplock® Systems, LLC and shall not be divulged, reproduced, copied or used as the basis for the manufacture or sale of apparatus without the express written authorization of Griplock® Systems, LLC.
1/32”
3/64”
3/64”
1/16”
1/16”
5/64”
3/32”
3/32”
1/8”
1/8”
12 / 12
1.0mm 19 / 17
1.2mm 25 / 22 25 / 22
1.2mm 35*/ 30*
1.6mm 50 / 45 50 / 45
1.6mm 75* / 65*
2.0mm 75 / 65 75 / 65
2.4mm 95 / 87 95 / 87
2.4mm 160* / 150*
2.5mm 100 / 90 100 / 90
2.5mm 170* / N/A
3.2mm 200 / 180
3.2mm 250* / 225*
THREAD SIZE THREAD DIA. KO SIZE THREAD SIZE THREAD DIA. KO SIZE
1/32”
3/64”
1/16”
5/64”
3/32”
1/8”
1/8”
WEIGHT LOAD GUIDELINES
Griplock Systems, LLC793 Duncan Reidville Rd.
Duncan, SC 29334
ph: 805.566.0064 / [email protected] / www.griplocksystems.com
1029 Cindy LaneCarpinteria, CA 93013