coverfen.pdf 1 2013-04-05 16:02:54 - jimexs · rod guide, zinc rod guide, zinc deadbolt locks part...
TRANSCRIPT
C
M
J
CM
MJ
CJ
CMJ
N
coverFen.pdf 1 2013-04-05 16:02:54
Important Information
Payment Terms
Sales ConditionsMinimum Order
Payment terms
Shipping Conditions
Return for Credit
Limited Warranty
Net, 30 days (upon credit approval)
F.A.B. Our wharehouse.
All credit returns must first be approved by our inside sales staff and must have a Return Marchandise Authorisation number (RMA) before they are sent back. Products must be in their original packaging.
All returns will be inspected by Jimexs inc. before issuing a credit. Note a 20% re-stocking charge will be applied.
Opening account A request to open an account can be done by sending a request to our custo-mer service only when there is a minimum buying potential of $2500 per year and the cumulated purchases of current year are equivalent or higher than $1000. The credit limit will be establish by your company’s credit and your buying potential.
$50.00 minimum order if not, an extra $5.00 handling fee will be added to your invoice.
The responsibility of Jimexs inc. is limited to the warranties offered by its suppliers. Jimexs inc. is not responsible for damages direct or indirect or indirect labour costs in the result of the replacement of a product.
This limited warranty is the only one given by Jimexs inc. The products illustrated in this catalogue are not warrantied by Jimexs inc.
If any information on application or installation are not clear or missing, it is the client’s responsibility to request this information from Jimexs or its suppliers.
No Jimexs inc. employees are authorized to give any kind of warranty on behalf of Jimexs inc. on the products illustrated in this catalogue or any products sold by Jimexs inc.
jimexs.com | [email protected]
C
M
J
CM
MJ
CJ
CMJ
N
p0EN_cover.pdf 1 2013-05-06 11:52:33
Serrures à paletteSerrures à paletteSummary
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Tool Boxes1
Locks2-10
Handles11-13
Hinges14-18
Latches and Bolts19-20
Drawer Slides21
Door Supports and Holders22-24
Cargo Control25-27
Adhesives and Sealants28
Rubber and Weatherstripping29-31
Mud Flaps, Floor Hardware32
Miscellaneous33
Ventilation and Heating34
Rivets35-39
Threaded Rods39
C
M
J
CM
MJ
CJ
CMJ
N
p0EN_sommaire.pdf 1 2013-05-06 11:50:43
jimexs.com | [email protected]
J-Boxs Tool Boxes
1
118-124 18’’ 18’’ 24’’118-136 18’’ 18’’ 36’’118-148 18’’ 18’’ 48’’118-160 18’’ 60’’118-436 24’’ 18’’ 36’’118-448 24’’ 18’’ 48’’118-460 24’’ 18’’ 60’’124-124 24’’ 24’’ 24’’124-136 24’’ 24’’ 36’’124-148 24’’ 24’’ 48’’124-160 24’’ 24’’ 60’’124-172 24’’ 24’’ 72’’130-136 24’’ 30’’ 36’’130-148 24’’ 30’’ 48’’130-160 24’’ 30’’ 60’’130-172 24’’ 30’’ 72’’136-124 24’’ 36’’ 24’’136-136 24’’ 36’’ 36’’136-148 24’’ 36’’ 48’’136-160 24’’ 36’’ 60’’136-172 24’’ 36’’ 72’’
118-236 18’’ 18’’ 36’’118-248 18’’ 18’’ 48’’118-260 18’’ 18’’ 60’’118-536 24’’ 18’’ 36’’118-548 24’’ 18’’ 48’’118-560 24’’ 18’’ 60’’124-236 24’’ 24’’ 36’’124-248 24’’ 24’’ 48’’124-260 24’’ 24’’ 60’’124-272 24’’ 24’’ 72’’130-236 24’’ 30’’ 36’’130-248 24’’ 30’’ 48’’130-260 24’’ 30’’ 60’’130-272 24’’ 30’’ 72’’136-236 24’’ 36’’ 36’’136-248 24’’ 36’’ 48’’136-260 24’’ 36’’ 60’’136-272 24’’ 36’’ 72’’
128-012 28-1/2’’ 24’’ 12’’128-018 28-1/2’’ 24’’ 18’’128-024 28-1/2’’ 24’’ 24’’
One-Door Tool Box with T-Handle
Two-Door Tool Box with compression lock
Part Depth Height Width
Aluminum 0.100’’, also available in 0.063’’
Aluminum 0.100’’, also available in 0.063’’
Step Tool Box with T-HandleAluminum 0.100’’
18’’
124-124
124-248
128-024
Part Depth Height Width
Part Depth Height Width
J-Boxs Tool Boxes' custom design are welcomed with quick lead time garanteed.
C
M
J
CM
MJ
CJ
CMJ
N
p1EN.pdf 1 2013-10-17 13:50:13
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Paddle Handles
2
225-101 ZincPart Finish Specifications
Locking CH501 with holes
Non-Locking with holes
225-102225-103225-191
225-202
ZincZinc
Locking CH502 with holesLocking CH503 with holes
Locking CH502 with holes
Zinc
225-201 S/S Locking CH501 with holes
225-291 S/S225-203
S/SS/S Locking CH503 with holes
225-951
225-965
Plastic
Neoprene
Inside release knob - black
Gasket225-961 Rubber Gasket
235-101 Zinc CH501235-102235-103235-104
ZincZinc
CH502CH503
Zinc
235-105 Zinc CH505CH504
Replacement key cylinders
Special replacement key cylinder
235-101
237-101 237-111
237-121 237-131
237-101 Nickel Slotted insert237-111 Hex insertNickel237-121 Nickel Black knob237-131 Wing typeNickel
Paddle handles
Non-Locking with holes
230-531 Zinc Striker for handle
230-531
225-961225-951
225-201
Accessories
5.50’’ x 4.25’’
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p2EN.pdf 1 2013-10-07 10:05:46
jimexs.com | [email protected]
Paddle Handles
3
225-501 ZincPart Finish Specifications
Locking CH501 with holes
Non-Locking with holes
225-502225-503225-591
225-522
ZincZinc
Locking CH502 with holesLocking CH503 with holes
Locking CH502 with holes
Zinc
225-521 S/S Locking CH501 with holes
225-596 S/S225-523
S/SS/S Locking CH503 with holes
235-701 Zinc CH501235-702235-703235-704
ZincZinc
CH502CH503
Zinc
235-705 Zinc CH505CH504
Replacement key cylinders
225-401 S/S Locking CH501 with holes225-491 Non-Locking with holesS/S
Non-Locking with holes
225-501
235-701
225-401
Tool Box Locks
Junior paddle handles4.75’’ x 3.625’’
3.25’’ x 3.25’’
225-951225-955
PlasticRubber
Inside release knob - blackGasket
230-531 Zinc Striker for handle
230-531
225-955 225-951
AccessoriesPart Finish Specifications
Part Finish Specifications
Part Finish Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p3EN.pdf 1 2013-10-07 10:16:47
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Recessed T-Handles
4
226-001 S/SPart Finish Specifications
4.88’’ x 4.75’’
Locking CH501, gasket
Dust cap
226-002226-003 S/S
Locking CH502, gasketLocking CH503, gasket
S/S
226-101 S/S Locking CH501, gasket, dust cover
226-191 Chrome
S/S
226-199 Neoprene Gasket
235-201 ZincPart Finish Specifications
CH501235-202235-203235-204
ZincZinc
CH502CH503
Zinc
235-205 Zinc CH505CH504
Replacement key cylinders
227-216 S/SPart Finish Specifications
Recessed handle - non-locking - 6-1/8" dia.227-226227-236227-246
S/SS/S
Recessed handle 2 pts - non-locking - 6-1/8" dia. Recessed handle - Locking - 6-1/8" dia.
S/S
Recessed handle 2 pts - Locking - 6-1/8" dia.
226-102226-103
Dust cap226-195 Plastic
235-201
T-Handles
S/S
226-406
226-406 ChromePart Finish Specifications
Handle - key cylinder not included226-451226-452226-453
--
Key cylinder J201 #18400DBJ201-09Key cylinder J202 #18400DBJ202-09
-
Key cylinder J203 #18400DBJ203-09
“Whale Tail” recessed T-handle
Locking CH502, gasket, dust coverLocking CH503, gasket, dust cover
Part Finish Specifications
Accessories
227-221 S/SPart Finish Specifications
Handle 227-226, 2 rods 230-301 & 2 guides 230-501227-241 Handle 227-246, 2 rods 230-301 & 2 guides 230-501S/S
Complete kit with rods and guides
Recessed D-handles
Recessed D-handles
227-951 RubberPart Finish Specifications
Gasket for handles 227-216, 227-226227-957 Gasket for handles 227-236, 227-246Rubber
Accessories
226-191
226-199226-101
226-195
227-236,227-246
227-216,227-226
227-957227-951
4
C
M
J
CM
MJ
CJ
CMJ
N
p4EN.pdf 1 2013-10-11 14:08:38
jimexs.com | [email protected]
Specialized handles
5
“RV” paddle handles
225-701 S/SPart Finish Specifications
Locking CH501 with holesS/S Non-Locking with holes
235-301 Zinc CH501
CH509
235-302235-303235-304
235-306
ZincZinc
CH502CH503
CH507
Zinc
235-305
235-308Zinc
CH510Zinc
235-307 ZincCH508Zinc
235-309235-310
Zinc CH505Zinc CH506
CH504
Replacement key cylinders
225-791*
225-701
235-301
Tool Box paddle handles
225-819 Zinc Rod guide
Rotary paddle handle
225-853 Black225-855 White
225-851 Chrome 3.47’’ x 4.28’’, Lockable3.47’’ x 4.28’’, Lockable3.47’’ x 4.28’’, Lockable
225-851 - Rear view
225-851 - Front view
225-301 CH-501 Locking CH501 with holes224-457 - Striker
4.37’’ x 3.27’’
225-301 225-457
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
* Rod guide not included
C
M
J
CM
MJ
CJ
CMJ
N
p5EN.pdf 1 2013-10-07 10:52:22
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Handles, rods and guides
6 6
RodsPart Diameter
230-201230-101
5/16’’1/4’’
Lenght
34’’36’’
230-301230-221
3/8’’5/16’’
36’’
230-321 3/8’’ 48’’
48’’
230-311 3/8’’ 36’’
GuidesPart Specification
230-511230-501
Rod guide, zincRod guide, zinc
Deadbolt Locks
Part Specification
224-926224-921
Zinc, 48’’ rods, leftZinc, 48’’ rods, right
3 points
230-501
224-921
230-511
230-101 230-201230-221
230-301230-321
230-311
Locking T-handle
Part SpecificationFinish
226-771 Center only226-751 Complete kit
S/SS/S
230-201 Rod230-511 Rod guide
ZincZinc
Complete kit with rods and guides
Part KeyFinish
224-801 CH501S/S
Locking paddle handle - 2 ptsComplete kit with rods and bolts
224-801
226-751
Flush BoltsPart SpecificationFinish
240-353 45°, for 3/8’’ rod240-351 45°, for 1/4’’ rod
ZincZinc
240-361 30°, for 1/4’’ rodZinc
240-351 240-353 230-361
C
M
J
CM
MJ
CJ
CMJ
N
p6EN.pdf 1 2013-10-07 11:28:15
228-423 Chrome228-421 Chrome flush mount striker, non-locking, 4-1/2"
flush mount striker, non-locking, 5-1/4"228-425 Chrome 3/8" offset striker, non-locking, 6-3/4"
Refrigeration handles
228-483 S/S228-481 S/S 5-1/2"
6-3/4"
High temperature handles
228-451* Chrome228-441* Chrome Ext. handle and striker included
Ext/Int. handle and striker included
228-491 Plastic Inside handle only228-461* S/S Ext/Int. handle and striker included
Refrigeration door kits
228-431 S/S Locking, flush mount, 40" S/S bar
222-641 S/S222-621 S/S Lockable, 320mm x 165mm
Lockable, 358mm x 138mm
Compression recessed locksKit, tube not included
222-621
228-441
228-491
Dual refrigeration handle
228-421
228-425
228-431
228-423
228-461 228-463
228-451, 228-461
FinishPart Specification
FinishPart Specification
FinishPart Specification
FinishPart Specification
FinishPart Specification
jimexs.com | [email protected]
Refrigeration locks
7
* Adjustable striker - 1/8" to 1/4"
C
M
J
CM
MJ
CJ
CMJ
N
p7EN.pdf 1 2013-10-15 09:30:25
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Cab Locks
8
Cab locks
224-406 Zinc Left side, 2” x 3.38”224-411 Zinc Without inside release, right side, 2” x 3.38”224-416 Zinc Without inside release, left side, 2” x 3.38”224-481 Zinc With inside release, right side, 2.875’’ x 2.9375’’224-491 Zinc Universal slamming, 5.375” x 3.875”
224-606 Zinc With locking trigger, left side, 2.375’’ x 3.375’’224-601 Zinc With locking trigger, right side, 2.375’’ x 3.375’’
224-401 Zinc Right side, 2” x 3.38”
Part Finish Specifications
Off-Road vehicle hardware
228-206 Right Cab Lock with Inside handle and striker223-001 Plastic Push-Button Handle, reinforced with nylon, 7-1/4’’223-351 Plastic Window Throw-Away, reinforced with nylon, 4’’202-201 Plastic Window Hinge, reinforced with nylon, 2.68’’
228-201 Left Cab Lock with Inside handle and striker
224-401 224-416
224-481 224-491
228-201 223-001
223-351
224-601
202-201
Part Finish Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p8EN.pdf 1 2013-10-07 11:48:25
jimexs.com | [email protected]
Compression Locks
9
Compression Locks
222-940 S/S Handle222-941222-942222-945
222-947
S/SS/SS/S
Handle clip Handle keeper
S/S
222-946Rod guide
222-121 S/S
Part Finish Specifications
27mm, 2 points - 2 rod guides
222-111 S/S 22mm, 3 points - 3 rod guides222-115 S/S 9’ 6’’ tube, 22 mm
222-123 S/S 27mm, 2 points - 3 rod guides222-125 S/S 9’ 6’’ tube, 27 mm222-581 Aluminum 27mm, 2 points - 3 rod guides222-589 Aluminum 10’ tube, 27mm
222-930 S/S Handle222-931222-932222-935
222-937
S/SS/S
Handle clip Handle keeper
S/S
222-936Rod guide
222-951 Aluminum Right hand cam222-952222-953222-954
222-956
AluminumNylon
Left hand camKeeper
Aluminum
Aluminum
AluminumAluminum
222-955Handle
222-957 Handle keeper
Upper bearing plateLower bearing plate
Components for 222-111
Components for 222-121, 222-123
Components for 222-581
222-581
222-111
222-121
CamS/S Keeper
S/S CamS/S Keeper
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p9EN.pdf 1 2013-05-06 11:45:00
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Compression Locks
10
Compression Locks
222-203 1969-6XEberhard
Handle222-205222-207222-209
222-213
1969-4X1969-391-1969-51969-101969-111969-81969-9X1969-2X1969-15625-165625-17
Seal pinSeal plate
1969-7X
222-211Middle rod bracket cover - topHandle clipBushing
222-215 Middle rod bracket cover - bottom222-217222-219
222-223
Bearing cover - back plate - topBearing cover - back plate - bottom
222-221KeeperCam
222-225 Bolt222-227 Locknut
222-583 Zinc 2 points, 4 rod guides
222-201 Steel Complete Eberhard #1969 Anti-rack222-451 Zinc Dead bolt lock
222-585 Zinc 27mm, 2 points, 3 rod guides
222-985 Zinc Handle222-987 Handle keeper Zinc
Components for 222-201
222-051 AluminumPart Finish Specifications
Lockable, gray222-801222-802222-803
222-805
---------
Key cylinder #301Key cylinder #302
-
222-804Key cylinder #305Key cylinder #304Key cylinder #303
222-806 Key cylinder #306222-807222-808
222-810
Key cylinder #307Key cylinder #308
222-809Key cylinder #310Key cylinder #309
Cargo-Vise locks
Components for 222-583
222-201 222-451
222-985 222-987
222-585
222-051
Part Finish Specifications
Part Specifications
Part Finish Specifications
- Tube not included
222-583
C
M
J
CM
MJ
CJ
CMJ
N
p10EN.pdf 1 2015-11-20 10:32:27
jimexs.com | [email protected]
Grab Handles
11
Grab handles
221-201 Chrome 7’’ C.-C., 4 holes221-203
5’’ C.-C., 4 holesCaoutchouc
221-211 ChromeJoint pour 221-201
221-851 Plastic 8’’ C.-C., 2 holes
221-851
221-211221-201
221-301
221-101 AluminumPart Finish Specifications
13’’ O.D., 4 holes221-106 13’’ O.D., 4 holesZinc
221-301 S/S 11-1/2’’ O.D., 4 holes221-311 28’’ O.D., 4 holesS/S
221-106
221-186
221-186 13’’ O.D., 2 holesZinc221-196 Chrome 13’’ O.D., 2 holes
221-708 Zinc 5-1/2’’ C.-C., 4 holes
221-708
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p11EN.pdf 1 2013-05-06 11:44:55
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Handles
12
Grab handles
220-801 Plain steel 4’’, holes 3.90" C.-C.220-806220-821 S/S
4’’, holes 3.90" C.-C.4-5/16’’, holes 3.90’’ C.-C.
Zinc
4’’ base, 4’’ handle229-106229-121
3-1/2’’ base, 4-5/16’’ handleS/SZinc
221-901 BlackPart Finish
6-1/4’’ C.-C., 7-1/2’’ O.D.221-911 9-3/4’’ C.-C., 11’’ O.D.Black
221-901
229-106
220-821
229-121
221-521
Specifications
221-521 18.31’’BlackPart Finish Specifications
Part Finish Specifications
Part Finish Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p12EN.pdf 1 2013-05-06 11:50:18
jimexs.com | [email protected]
“L, T” Handles
Part Finish Specifications
220-503 Chrome Locking, front mount, dust shutter, with gasket, 1-1/2’’ c.c., 3’’ shaft220-507 Chrome Non-locking, front mount, with gasket, 1-1/2’’ c.c., 3’’ shaft220-509 Chrome Non-locking, front mount, with gasket, 1-3/4’’ c.c., 3’’ shaft220-905 Chrome Interior handle, 4-1/8’’, for 5/16’’ shaft220-911 Zinc Inside handle with set screw, 5-1/2’’, for 5/16’’ shaft223-101 Chrome Locking, no dust shutter, 1-1/2’’ c.c., 4’’ shaft223-103 Chrome Locking, no dust shutter, 1-3/4’’ c.c., 4’’ shaft223-105 Chrome Locking, no dust shutter, free rotation when locked, 1-1/2’’ c.c., 4’’ shaft
223-121 Chrome Non-locking, 1-3/4’’ c.c., 4’’ shaft223-111 Chrome Locking, no dust shutter, blind mount, 1-13/16’’ c.c., 4’’ shaft
220-501 Chrome Locking, front mount, dust shutter, with gasket, 1-3/4’’ c.c., 3’’ shaft
Part Finish Specifications
T-Handles
L-Handles
223-203 Chrome Locking, no dust cover, 1-1/2’’ c.c., 4’’ shaft223-205 Chrome Locking, with dust cover, 1-1/2’’ c.c., 4’’ shaft223-207 Chrome Locking, no dust cover, 1-3/4’’ c.c., 4’’ shaft223-221 Chrome Non-locking, 1-1/2’’ c.c., 4’’ shaft
223-201 Steel black Locking, with dust cover, 1-1/2’’ c.c., 4’’ shaft
220-503 220-507 220-905 223-101
223-103 223-105 223-111 223-121
223-201 223-203 223-205 223-207 223-221
2230-521
Part Finish Specifications
Latch
230-521 Zinc Adjustable Latch with screw for 5/16'' square shank
C
M
J
CM
MJ
CJ
CMJ
N
p13EN.pdf 1 2015-11-19 10:21:39
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Piano Hinges
14
210-201
Part Lenght Width Thickness Pin diameter Rod material Knuckles
210-105 72’’210-111 72’’
72’’72’’72’’
72’’72’’72’’
73.5’’
1-1/16’’1-1/2’’2’’2’’2’’
3’’3’’5’’
2’’
0.042’’0.060’’0.060’’0.060’’0.072’’
0.072’’0.078’’0.125’’
0.090’’
0.091’’0.120’’0.187’’0.187’’0.250’’
0.250’’0.250’’0.375’’
0.250’’
SteelSteelSteelBrassSteel
SteelBrassSteel
Brass
1/2’’1/2’’1’’1’’1’’
1’’1’’2’’
1-3/4’’
210-203210-205210-207210-301210-303210-501
213-105
213-101 72’’213-103 72’’
72’’72’’72’’
96’’84’’
1-1/16’’1-1/2’’1-1/2’’2’’2’’
3’’3’’
0.035’’0.035’’0.060’’0.060’’0.060’’
0.072’’0.060’’
0.086’’0.086’’0.120’’0.120’’0.187’’
0.250’’0.187’’
S/SS/SS/SS/SS/S
S/SS/S
1/2’’1/2’’1/2’’1/2’’1’’
1’’1’’
213-201213-205213-301213-303
Steel piano hinges
212-303
212-101 72’’212-201 72’’
72’’
1-1/2’’2’’3’’
0.041’’0.064’’0.064’’
0.091’’0.120’’0.125’’
AluminumAluminumAluminum
1/2’’1/2’’1/2’’
Aluminum piano hinges
Stainless Steel piano hinges
203-251 Plain steelPlain steel
1/2” pin, 3-3/4”, type P203-261 1/2” pin, 4”, type PPlain steel203-271 Plain steel 1/2” pin, 4-1/2”, type P203-283 1/2” pin, 2-1/2”, Knurled PinPlain steel
203-201
Part Finish Specifications
3/8” pin, 4”, type OAluminum203-001 1/2" pin, 4,75" x 5,00" x 0,188"
Plain steel weld-on hinges
203-706 Plain steelPlain steel
5-1/4’’ with grease fitting203-701 3-1/4’’ with grease fitting
Part Lenght Width Thickness Pin diameter Rod material Knuckles
Part Lenght Width Thickness Pin diameter Rod material Knuckles
- Other models available. contact us for more details
- Other models available. contact us for more details
- Other models available. contact us for more details
202-201, 203-251 203-261, 203-271 203-283
203-701, 203-706203-001
C
M
J
CM
MJ
CJ
CMJ
N
p14EN.pdf 1 2015-11-19 11:18:01
jimexs.com | [email protected]
- 215-244 - - 260 mm 10” 10
Weld-on Hinges
15
215-217
215 Series|Profile (Steel), Pin (Steel), Washers (Brass)
DimensionsGrease Fitting Brass PinSteel Pin Grease Fitting
218-100 218-200
218 Series|Profile(S/S), Pin(S/S), Washers(S/S)
DimensionsS/S 304
215-100216-100
215-200216-200
215-101215-104215-109215-112
215-120
215-133
215-125215-128
215-136215-141
215-117215-220
215-233
215-225215-228
215-236215-241
216-101
216-109216-112
216-120
216-133
216-125216-128
216-136216-141
216-117
216-104
--
--
216-217216-220
216-233
216-225216-228
216-236216-241
--
--
80 mm100 mm
150 mm
120 mm135 mm
180 mm200 mm
70 mm60 mm
40 mm50 mm
3-3/16”4”
6”
4-3/4”5-1/4”
7”8”
2-3/4”2-3/8”
1-9/16”2”
218-109
218-120
218-133218-125
218-136
218-117
218-141
Box Qty.
2020
2020
101010
Box Qty.
2020
2020
20202010101010
216 Series|Profile (Steel), Pin (Brass), Washers (Brass)
mm ADimension (’’) B C D I
10’’260 28 32 129 19 -
7’’180 20 25 88,6 14 -
5-1/4’’135 18 22 66,3 12 -
4’’100 16 20 48,9 10 -
2-3/4’’70 11,5 13,5 34,1 6 -
2’’50 8 9,5 24 5 -
8’’200 23 28,5 98,5 16 -
6’’150 20 25 73,6 13 -
4-3/4’’120 16 20 58,9 11 -
3-3/16’’80 13 15,5 39,1 8 -
2-3/8’’60 10 12 29 6 -
1-9/16’’40 8 9,5 19 5 -
C D
I
A
B
C
60 mm 2-3/8”80 mm 3-3/16”100 mm 4”120 mm 4-3/4”150 mm 6”180 mm 7”200 mm 8”
C
M
J
CM
MJ
CJ
CMJ
N
p15EN.pdf 1 2015-11-19 13:12:37
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Weld-on Hinges
16
915-217
915 Series|Profile (Steel), Pin (Steel), Washers (Brass)
DimensionsGrease Fitting Brass PinSteel Pin Grease Fitting
917-100 917-200
918-100
917 Series|Profile(Aluminum), Pin(S/S), Washers(S/S)
918 Series|Profile(S/S), Pin(S/S), Washers(S/S)DimensionsGrease Fitting S/S 304 Aluminum
915-100916-100
915-200916-200
915-101915-104915-109915-112
915-120
915-133
915-125915-128
915-136915-141
915-117915-220
915-233
915-225915-228
915-236915-241
916-101
916-109916-112
916-120
916-133
916-125916-128
916-136916-141
916-117
916-104
-
-
-
--
916-217916-220
916-233
916-225916-228
916-236916-241
-
-
-
--
80 mm100 mm
150 mm
120 mm135 mm
180 mm200 mm
70 mm60 mm
40 mm50 mm
3-3/16”4”
6”
4-3/4”5-1/4”
7”8”
2-3/4”2-3/8”
1-9/16”2”
917-109
917-120
917-133917-125
917-136917-141
917-117917-220
917-233917-236917-241
917-225
917-217- -
918-120
918-133918-125
918-136
918-117
918-141
Box Qty.
2525
5025
252525
Box Qty.
5025
5050
252525252525
915-144 915-244 260 mm 10-1/4” 2525
916 Series|Profile (Steel), Pin (Brass), Washers (Brass)
mm ADimension (’’) B C D I
10’’260 28 32 129 19 72
7’’180 20 25 88 13 40
5-1/4’’135 18 22 65,5 10 35
4’’100 16 20 48,5 7 30
2-3/4’’70 11,5 13,5 33,8 5,5 20
2’’50 8 10 24 5 15
8’’200 23 29 98 14 43
6’’150 20 25 73 13 35
4-3/4’’120 16 20 58,5 9 30
3-3/16’’80 13 16 38,8 6 22
2-3/8’’60 10 12 29 6 20
1-9/16’’40 8 10 19 5 15
C D
I
A
B
C
60 mm 2-3/8”80 mm 3-3/16”
100 mm 4”120 mm 4-3/4”150 mm 6”180 mm 7”200 mm 8”
C
M
J
CM
MJ
CJ
CMJ
N
p16EN.pdf 1 2015-11-19 13:19:03
jimexs.com | [email protected]
Stainless Steel Strap Hinge
Strap Hinges
202-251 S/S 304
S/S 304
3.15”, square holes202-253 3.15”, square holesS/S 304202-255 S/S 304 4.92”, square holes202-257 4.92”, square holesS/S 304202-261 3.50”, square holesS/S 304
S/S 304202-265 5.00”, square holes
202-120Part Finish Specifications
4.75”
202-251, 202-253202-255, 202-257
202-261, 202-265
202-120
Stainless Steel hinges
202-221 S/S 304S/S 304
4.13’’202-231 4.50’’S/S 304202-241 S/S 304 4.25’’
202-301 5.50’’S/S 304
202-211 2.36’’ x 2.32’’, 4mm thickness
204-806 S/S 304S/S 304
259mm x 81mm, square butt204-821 321mm x 85mm, standard buttS/S 304204-826 S/S 304 321mm x 85mm, square butt204-841 327mm x 85mm, standard buttS/S 304204-846 327mm x 85mm, square buttS/S 304
204-801 259mm x 81mm, standard butt
Stainless Steel Heavy Duty Hinges
202-211
202-241
204-841
202-221 202-231
202-301
17
204-801
204-821
204-846
204-508
204-806
204-826
204-508 8.2’’ x 2’’S/S 304Part Finish Specifications
Part Finish Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p17EN.pdf 1 2013-10-07 14:51:13
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Strap Hinges
18
Aluminum204-418 8’’, 3 holes butt, 270°Aluminum204-412 Aluminum 12’’, 270°204-728 16’’Aluminum
204-404Part Finish Specifications
3.75’’
Aluminum strap hinges
204-901 ZincZinc
5’’, right, Eberhard 5867-E1202-601 8.75’’, heavy-duty, Eberhard 5884Zinc
202-216 2.36’’ x 2.32’’, 4mm thickness
Zinc plated hingesPart Finish Specifications
204-112 ZincZinc
12’’, standard butt204-116 16’’, standard buttZinc
ZincZincZinc
204-308 8’’, 3 holes butt204-312 12’’, 3 holes butt204-316 16’’, 3 holes butt
204-108Part Finish Specifications
8’’, standard butt
Zinc plated strap hinges
204-404
204-412 204-728
204-418
202-216
202-601
202-901
204-108 204-308
C
M
J
CM
MJ
CJ
CMJ
N
p18EN.pdf 1 2013-10-07 15:04:48
jimexs.com | [email protected]
Latches and Bolts
19
Latches
240-101 ZincPart Finish Specifications
1/2” pin, 6.300” O.D.
1/2” pin, 8.750” O.D.
240-103240-106240-111
240-151
ZincZincZinc
1/2” pin, 6.300” O.D.1/2” pin, 4” handle - 6.30”
3/8” pin, 5.125” O.D.
S/S240-106
240-151
240-101
242-101 Rubber + zinc 2-1/2”
3-1/2”
242-106242-111242-116242-131
Rubber + zincRubber + S/SRubber + zinc
2-1/2”3-1/2”
5”
Rubber + S/S
242-136242-141242-151
Rubber + S/SRubber + zincRubber + zinc
5”6”8”--
242-101
242-131
242-141
242-151
242-181242-191
Steel, blackSteel, black
242-181 242-191
240-121Zinc
5/8” pin, 9.500” O.D.
Catch & striker
241-101 Zinc Straight baseStriker241-401 Zinc
241-101 241-401
240-306 2” x 1.62”, 4 holesZinc240-121
240-111
240-306
Hood latches
410-201 Zinc PlatedPart Finish Specifications
410-205410-207410-211
Plain steelPlain steel
5/8”, W.L.L. 6 000 lbs., B.S. 18 000 lbs.3/4”, W.L.L. 8 833 lbs., B.S. 26 500 lbs.1”, W.L.L. 15 586 lbs., B.S. 46 760 lbs.
Plain steel
Forged D-ring with bracket
1/2”, W.L.L. 3 666 lbs., B.S. 11 000 lbs.410-203 Plain steel 1/2”, W.L.L. 3 666 lbs., B.S. 11 000 lbs.
Part Finish Specifications
Part Finish Specifications
410-091 Zinc
Part Finish Specifications
1200 lbs., 4’’
5000 lbs., 4-1/2’’ x 4-7/8’’
410-101
410-111410-121410-131
ZincZincZinc
1200 lbs., 3-1/2’’ x 5’’
2000 lbs., 3-3/4’’ x 4’’
6000 lbs., 6-1/4’’ dia.
Zinc410-106 1200 lbs., 3-1/2’’ x 5’’Zinc
410-021 400 lbs., ins. dia. 1-1/2’’Zinc410-091410-021 410-101,
410-106
Tie Downs
410-213 Plain steel 1”, W.L.L. 15 333 lbs., B.S. 46 000 lbs.
410-121410-111 410-131
410-201 410-203, 410-205 410-207
410-211 410-213
C
M
J
CM
MJ
CJ
CMJ
N
p19EN.pdf 1 2015-11-20 10:33:32
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Latches and Bolts
20
465-100 Zinc Replacement S-hooks465-109465-115465-121
RubberRubber
9”15”
465-131465-141
RubberRubberRubber
21”31”41”
Tarp StrapsPart Finish Specifications
243-101 ZincPart Finish Specifications
3.5”, locking
3.5”, non-locking
243-106243-111243-116
243-121
ZincS/S
Zinc
3.5”, locking3.5”, non-locking
Striker for 3.5”
S/S
243-126243-131243-136
S/SZincS/S
Striker for 3.5”Striker for 3.5”Striker for 3.5”
243-141 Zinc 4.7”, locking243-146
243-161 Zinc
4.7”, locking
Striker for 4.7”Striker for 4.7”
S/S
243-166 S/S
243-171 Zinc 6.4”, locking243-176
243-191 Zinc
6.4”, locking
Striker for 6.4”Striker for 6.4”
S/S
243-196 S/S
2”, 2 holes 0.20’’ dia.410-306410-321 Zinc
3”, 2 holes 0.26’’ dia.Zinc
410-321
J-Hooks
240-201 Zinc 9-3/8’’, ext. 10-3/8’’ max240-221 8-3/4’’, ext. 9-1/2’’ maxZinc
Over center latches
Adjustable Latches
Strikers for adjustable latches
243-111, 243-116
243-121243-126
243-131243-136
243-161243-166
243-171, 243-176
243-191243-196
240-201 240-221
203-801 Zinc Left, 3’’203-806 Right, 3’’Zinc203-821 EyeZinc
Rack Fastener
410-306
243-141, 243-146
243-101, 243-106
203-821203-801
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
465 Serie
C
M
J
CM
MJ
CJ
CMJ
N
p20EN.pdf 1 2013-10-07 15:15:01
jimexs.com | [email protected]
Drawer Slides
21
B
A
323-110 10’’ 1.85’’ 0.500’’323-112 12’’ 1.85’’ 0.500’’323-114 14’’ 1.85’’ 0.500’’323-116 1.85’’ 0.500’’323-118 18’’ 1.85’’ 0.500’’323-120 20’’ 1.85’’ 0.500’’323-122 22’’ 1.85’’ 0.500’’323-124 24’’ 1.85’’ 0.500’’323-126 26’’ 1.85’’ 0.500’’323-128 28’’ 1.85’’ 0.500’’
100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs100 lbs150 lbs150 lbs150 lbs150 lbs150 lbs150 lbs150 lbs150 lbs
Full Extension SlidesPart Lock’in, Lock’out Part Lenght A B Capacity
16’’
323-210 10’’ 1.95’’ 0.500’’323-212 12’’ 1.95’’ 0.500’’323-214 14’’ 1.95’’ 0.500’’323-216 1.95’’ 0.500’’323-218 18’’ 1.95’’ 0.500’’323-220 20’’ 1.95’’ 0.500’’323-222 22’’ 1.95’’ 0.500’’323-224 24’’ 1.95’’ 0.500’’
16’’
250 lbs250 lbs250 lbs250 lbs250 lbs250 lbs250 lbs250 lbs
323-310 10’’ 2.09’’ 0.750’’323-312 12’’ 2.09’’ 0.750’’323-314 14’’ 2.09’’ 0.750’’323-316 2.09’’ 0.750’’323-318 18’’ 2.09’’ 0.750’’323-320 20’’ 2.09’’ 0.750’’323-322 22’’ 2.09’’ 0.750’’323-324 24’’ 2.09’’ 0.750’’
16’’
250 lbs250 lbs250 lbs250 lbs250 lbs250 lbs
323-326 26’’ 2.09’’ 0.750’’323-328 2.09’’ 0.750’’323-330 30’’ 2.09’’ 0.750’’323-332 32’’ 2.09’’ 0.750’’323-334 34’’ 2.09’’ 0.750’’323-336 36’’ 2.09’’ 0.750’’
28’’
up to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbs
323-508 8’’ 3.00’’ 0.750’’323-510 10’’ 3.00’’ 0.750’’323-512 12’’ 3.00’’ 0.750’’323-514 3.00’’ 0.750’’323-516 16’’ 3.00’’ 0.750’’323-518 18’’ 3.00’’ 0.750’’323-520 20’’ 3.00’’ 0.750’’323-522 22’’ 3.00’’ 0.750’’
14’’
323-6XX - Lock’in, Lock’out
up to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbs
323-524 24’’ 3.00’’ 0.750’’323-526 26’’ 3.00’’ 0.750’’323-528 28’’ 3.00’’ 0.750’’323-530 3.00’’ 0.750’’323-532 32’’ 3.00’’ 0.750’’323-534 34’’ 3.00’’ 0.750’’323-536 36’’ 3.00’’ 0.750’’323-538 38’’ 3.00’’ 0.750’’
30’’
up to 500 lbsup to 500 lbsup to 500 lbsup to 500 lbs
323-540 40’’ 3.00’’ 0.750’’323-542 3.00’’ 0.750’’323-548
323-612323-614323-616323-618323-620323-622323-624323-626323-628
323-636
323-648 48’’ 3.00’’ 0.750’’323-560
----------------------------------
-
--
---
- 60’’ 3.00’’ 0.750’’
42’’
323-5XX
323-3XX, detachable
323-2XX, detachable
323-1XX, detachable
C
M
J
CM
MJ
CJ
CMJ
N
p21EN.pdf 1 2013-10-07 15:24:02
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Door Holders
22
251-201 Zinc 1.5”, 1.25’’ C.-C.
4.5”, 1.25’’ C.-C.
251-206251-211251-216
251-226
ZincS/SZinc
2.5”, 1.25’’ C.-C.
3.5”, 1.25’’ C.-C.2.5”, 1.25’’ C.-C.
S/S
251-221S/S
1.5”, 1.25’’ C.-C.
251-236251-241
S/SNylon
4.5”, 1.25’’ C.-C.
254-151 Rubber+Plast Kit - 2 pieces
251-171
254-501 Alum. alloy 3’’, gaskets included
251-111 ZincPart Finish Specifications
4’’ kit251-121 4’’ kitS/S
S/S251-401 Heavy duty 4’’ kit
6’’ kit251-131251-141
251-148
ZincS/SZinc
6’’ kit
10’’ kitReceptacle only with springReceptacle only with spring
251-145S/S
10’’ kit
251-151251-161
ZincS/S
Door holders
251-231
251-243
Zinc
Nylon
3.5”, 1.25’’ C.-C.
White receptacle Black receptacle
Zinc Kit - 3 pieces 251-181 Plain steel -
251-501 S/S Door retainer
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
251-311251-321 Aluminium
Aluminium2-5/8’’, male3-3/8’’, Receptacle
Aluminium
251-351
2-1/8’’, male
251-121 251-401
251-221 251-241 251-243
251-311, 251-321
254-151
254-501
251-171
251-501
251-351
251-181
C
M
J
CM
MJ
CJ
CMJ
N
p22EN.pdf 1 2015-11-19 14:46:31
jimexs.com | [email protected]
Gas Springs
23
281-022 22 lbs (98N) 9.8’’ (250mm) - 6.7’’ (170mm) 3.1’’ (80mm) Plastic, 10 mm281-050 50 lbs (222N) 9.8’’ (250mm) - 6.7’’ (170mm) 3.1’’ (80mm) Plastic, 10 mm281-100 100 lbs (445N) 9.8’’ (250mm) - 6.7’’ (170mm) 3.1’’ (80mm) Plastic, 10 mm
283-013 12.2’’ (310mm) - 8.3’’ (210mm) 3.9’’ (100mm) Plastic, 10 mm283-035 35 lbs (156N) 12.2’’ (310mm) - 8.3’’ (210mm) 3.9’’ (100mm) Plastic, 10 mm283-065 65 lbs (289N) 12.2’’ (310mm) - 8.3’’ (210mm) 3.9’’ (100mm) Plastic, 10 mm283-100 100 lbs (445N) 12.2’’ (310mm) - 8.3’’ (210mm) 3.9’’ (100mm) Plastic, 10 mm
285-030 30 lbs (142N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm285-013 13 lbs (58N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm
285-060 60 lbs (278N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm
285-120 120 lbs (545N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm285-090 90 lbs (400N) 12.5’’ (317mm) - 8.25’’ (209,5mm) 4.25’’ (108mm) Plastic, 10 mm
287-035 35 lbs (156N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-045 45 lbs (200N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-060 60 lbs (267N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-080 80 lbs (356N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-097 97 lbs (432N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm287-135 135 lbs (600N) 17.1’’ (435mm) - 10.8’’ (275mm) 6.3’’ (160mm) Plastic, 10 mm
289-030 30 lbs (142N) 18’’ (457mm) - 10.5’’ (267mm) 7.5’’ (190,5mm) Plastic, 10 mm289-060 60 lbs (278N) 18’’ (457mm) - 10.5’’ (267mm) 7.5’’ (190,5mm) Plastic, 10 mm289-090 90 lbs (400N) 18’’ (457mm) - 10.5’’ (267mm) 7.5’’ (190,5mm) Plastic, 10 mm289-120 120 lbs (545N) 18’’ (457mm) - 10.5’’ (267mm) 7.5’’ (190,5mm) Plastic, 10 mm
293-020 20 lbs (89N) 19.7’’ (500mm) - 11.8’’ (300mm) 7.9’’ (200mm) Plastic, 10 mm293-030 30 lbs (133N) 19.7’’ (500mm) - 11.8’’ (300mm) 7.9’’ (200mm) Plastic, 10 mm293-060 60 lbs (267N) 19.7’’ (500mm) - 11.8’’ (300mm) 7.9’’ (200mm) Plastic, 10 mm293-100 100 lbs (445N) 19.7’’ (500mm) - 11.8’’ (300mm) 7.9’’ (200mm) Plastic, 10 mm
291-050 50 lbs (225N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-075 75 lbs (335N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-100 100 lbs (445N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-150 150 lbs (665N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-200 200 lbs (890N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm291-250 250 lbs (1110N) 20.6’’ (523mm) - 12.5’’ (320mm) 8’’ (203mm) Steel, 13 mm
295-087 87 lbs (385N) 26.34’’ (669mm) - 16.10’’ (409mm) 10.24’’ (260mm) Plastic, 10 mm295-120 120 lbs (534N) 26.34’’ (669mm) - 16.10’’ (409mm) 10.24’’ (260mm) Plastic, 10 mm
297-050 50 lbs (225N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-075 75 lbs (335N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-100 100 lbs (445N) 27.875’’ (710mm) - 16,875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-150 150 lbs (665N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-200 200 lbs (890N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm297-250 250 lbs (1110N) 27.875’’ (710mm) - 16.875’’ (430mm) 11’’ (279mm) Steel, 13 mm
Gas springsPart Force Dimension Stroke End Fitting
298-056 56 lbs (249N) 35.68’’ (906mm) - 19.58’’ (497mm) 16.10’’ (409mm) Steel, 13 mm298-079 79 lbs (351N) 35.68’’ (906mm) - 19.58’’ (497mm) 16.10’’ (409mm) Steel, 13 mm298-090 90 lbs (400N) 35.68’’ (906mm) - 19.58’’ (497mm) 16.10’’ (409mm) Steel, 13 mm298-203 203 lbs (902N) 35.68’’ (906mm) - 19.58’’ (497mm) 16.10’’ (409mm) Steel, 13 mm
13 lbs (58N)Part Force Dimension Stroke End Fitting
Part Force Dimension Stroke End Fitting
Part Force Dimension Stroke End Fitting
Part Force Dimension Stroke End Fitting
Part Force Dimension Stroke End Fitting
Part Force Dimension Stroke End Fitting
Part Force Dimension Stroke End Fitting
Part Force Dimension Stroke End Fitting
Part Force Dimension Stroke End Fitting
C
M
J
CM
MJ
CJ
CMJ
N
p23EN.pdf 1 2015-11-19 14:52:52
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Composante pour cylindre à gazArrêt de porte 24
299-036 Zinc 10 mm299-017
Ball Studs
299-001 Plastic 10mm receptacle13mm kit with clip299-011 Zinc
299-013 Zinc 13mm receptacle299-015 Zinc 13mm safety clip
10mm receptacle299-041 Steel
End Fittings
299-101 Zinc 10 mm stud
299-118299-111
299-121
299-141299-146 S/S
299-131
299-151
Brackets
260-101260-151
S/S 11’’, 15 lbs.
Door Checks
260-151260-101
261-108 Zinc 8"Part Finish Specifications
Telescopic props
261-110261-112261-116261-118
299-131299-121
299-118299-111
299-036
299-141
299-101
261-112
10 mm stud
299-166
299-151299-146 299-166
299-017
299-011
299-015
299-001 299-013
299-041
Gas Spring Hardware
24
Zinc 10"Zinc 12"Zinc 16"Zinc 18"
S/S 13’’ with 11" arm, 30 lbs.
Zinc 13 mm
Zinc 10 mm studZinc 10 mm stud, reversibleZinc 10 mm studZinc 10 mm studZinc 10 mm stud
Zinc 10 mm studS/S 10 mm stud
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
Part Finish Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p24EN.pdf 1 2013-10-07 15:35:56
jimexs.com | [email protected]
Chains and hooks
25
General Utility ChainHot galvanized of chain reduces W.L.L. by 20%
Self colored Diameter
413-260413-261413-262413-263413-264413-265413-266413-267
1/8”3/16”1/4”5/16”3/8”1/2”5/8”3/4”
Galvanized413-270413-271413-272413-273413-274413-275413-276413-277
Zinc413-280413-281413-282413-283413-284413-285413-286413-287
Inside diameter
0.25’’ x 0.69’’0.33’’ x 0.97’’0.43’’ x 1.14’’0.50’’ x 1.24’’0.57’’ x 1.35’’0.75’’ x 1.70’’0.89’’ x 2.60’’1.10’’ x 2.63’’
W.L.L.
325 lbs.630 lbs.
1100 lbs.1900 lbs.2650 lbs.4500 lbs.6900 lbs.
10600 lbs.
Transport ChainGrade 70
Clevis Grab HookGrade 70
Clevis Slip Hook
Eye Slip Tow Hook
Grade 70
Yellow Dichromate413-291413-293413-295413-299
Diameter1/4”5/16”3/8”1/2”
Inside diameter
0.50’’ x 1.00’’0.48’’ x 1.12’’0.57’’ x 1.20’’0.75’’ x 1.70’’
W.L.L.
413-201 1/4”Part Chain type
3150 lbs.413-203413-205413-209
5/16”3/8”1/2”
4700 lbs.6600 lbs.
11300 lbs.
3150 lbs.4700 lbs.6600 lbs.
11300 lbs.
413-211 1/4”Without latch Chain type W.L.L.
W.L.L.
2750 lbs.413-221With latch
413-213413-215413-217413-219
413-223413-225413-227413-229
5/16”3/8”7/16”1/2”
4300 lbs.5250 lbs.6600 lbs.9000 lbs.
413-191 5/8”Part Eye diameter W.L.L.
800 lbs.1/2”Opening
413-193 3/4” 5/8” 1500 lbs.413-193413-191
413-221413-211
413-201
413-260
413-291C
M
J
CM
MJ
CJ
CMJ
N
p25EN.pdf 1 2013-05-06 11:44:15
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Hooks and chain hardware
26
Part W.L.L.
413-171413-173413-175413-177413-179413-181413-183413-185413-187
1500 lbs.2000 lbs.3000 lbs.4000 lbs.6000 lbs.9000 lbs.
14000 lbs.22000 lbs.30000 lbs.
Eye slips hook with latchAlloy
Lap links
Quick links
Screw Pin Anchor Shackles
Zinc
Galvanized steel
413-171
413-400
Zinc
413-421413-423413-425413-427413-429413-431413-433
Breaking strength
200 lbs.600 lbs.
1000 lbs.1700 lbs.2100 lbs.2600 lbs.3300 lbs.
S/S
413-435413-437413-439413-441413-443
-413-445
Size (inch)
1/8"3/16"1/4"5/16"3/8"7/16"1/2"
Part Chain Dia. x I.D.
413-401413-403413-405413-409
1/4" x 1-1/2"5/16" x 1-1/2"3/8" x 2"1/2" x 2-1/2"
Breaking strength
450 lbs.1200 lbs.1400 lbs.2400 lbs.3200 lbs.
-5500 lbs.
Size (mm)
3 mm5 mm6 mm8 mm10 mm11 mm12 mm
Non rated
414-501414-503414-505414-507414-509414-511414-513
Rated Size W.L.L.
414-515414-517414-519
-----
414-521414-523414-525414-527414-529414-531414-533414-535414-537414-539414-541414-543414-545414-547414-549
3/16”1/4”5/16”3/8”7/16”1/2”5/8”3/4”7/8”1”1-1/8”1-1/4”1-3/8”1-1/2”1-3/4
660 lbs.1000 lbs.1500 lbs.2000 lbs.3000 lbs.4000 lbs.6500 lbs.9500 lbs.
13000 lbs.17000 lbs.19000 lbs.24000 lbs.27000 lbs.34000 lbs.50000 lbs.
413-400 3/16" x 1"
413-421
414-501
C
M
J
CM
MJ
CJ
CMJ
N
p26EN.pdf 1 2013-05-06 11:49:13
jimexs.com | [email protected]
Quick PinsTrailer hardware
27
5/16’’ x 1-3/8’’5/16’’ x 1-3/4’’3/8’’ x 1-3/8’’
418-101Part Specifications
418-103418-104
1/4’’ x 1-3/8’’
418-105
1/4’’ x 1-3/4’’418-102
Quick PinsRound, zinc
3/8’’ x 2-1/4’’3/8’’ x 2-1/2’’
418-111
418-113418-114
1/4’’ x 2-1/2‘’5/16’’ x 2-1/2’’418-112
Quick PinsSquare, zinc
5/16’’ x 1-9/16’’, 1-1/4’’ usable3/8’’ x 1-3/4’’, 1-7/16’’ usable
418-121
418-123418-124
7/16’’ x 1-9/16’’, 1-11/32’’ usable7/16’’ x 1-3/4’’, 1-1/2’’ usable
418-125418-126
3/16’’ x 1-9/16’’, 1-1/4’’ usable1/4’’ x 1-9/16’’, 1-1/4’’ usable418-122
Lynch PinsRound, zinc
3/4’’ x 4-1/4’’
418-131
418-1343/4’’ x 6-1/4’’7/8’’ x 6-1/4’’
418-135418-136
1’’ x 6-1/4’’1-1/8’’ x 6-1/4’’
418-137
1-1/4’’ x 6-1/4’’418-139418-138
1/2’’ x 4-1/4’’5/8’’ x 4-1/4’’418-132
Hitch pinsZinc
400-109 2’’ x 2-1/2’’, 3500 lbs400-111 2’’ x 3’’, 3500 lbsZinc
Zinc
Trailer CouplingSAE Class II
Part Specifications
Part Specifications
Part Specifications
SpecificationsFinishPart
418-101
418-111
418-121
418-131
400-109 400-111
C
M
J
CM
MJ
CJ
CMJ
N
p27EN.pdf 1 2015-11-19 14:58:13
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Adhesives and Sealants
28
White575-752 75-AM, High performance, 30 un. / boxAluminum gray575-753 Black 75-AM, High performance, 30 un. / box
575-758* Yellow bus 75-AM, High performance, 30 un. / box575-754 75-AM, High performance, 30 un. / boxColonial White
575-751Part Color Specifications
75-AM, High performance, 30 un. / box
White575-252 25-AM, Fast cure, 36 un. / boxAluminum gray575-253* Black 25-AM, Fast cure, 36 un. / box
575-251 25-AM, Fast cure, 36 un. / box
Adhesives/sealants Polyurethane
White575-652 65-A, High capacity, 36 un. / boxAluminum gray
580-122 65-H, Durable for roof, 4 un. / boxAluminum gray575-653* Black 65-A, High capacity, 36 un. / box
575-651 65-A, High capacity, 36 un. / box
Adhesives/sealants Neoprene
White575-502* 501-A, General purpose, 36 un. / boxGray575-503 Black 501-A, General purpose, 36 un. / box
575-501* 501-A, General purpose, 36 un. / box
White590-201* Butyl in rolls, 1/16’’ x 1/4’’ x 100’ , 16 rl. / boxGris
590-211 Butyl in rolls, 1/16’’ x 3/4’’ x 100’ , 16 rl. / boxGris
590-101* For roofs, 4’’ x 50’ , 8 rl. / boxAluminum gray
590-206* Gris Butyl in rolls, 1/16’’ x 1/2’’ x 100’ , 16 rl. / box
590-106 For roofs, 4’’ x 50’ , 8 rl. / box
590-216 Gris Butyl in rolls, 1/16’’ x 1’’ x 100’ , 12 rl. / box
Gris590-261* Butyl in rolls, 1/8’’ x 3/4’’ x 60’ , 16 rl. / boxGris
590-361 Butyl in rolls, 1/8’’ x 3/4’’ x 60’ , 16 rl. / boxBlack
590-251* Butyl in rolls, 1/8’’ x 1/2’’ x 60’ , 20 rl. / boxGris
590-266* Gris Butyl in rolls, 1/8’’ x 1’’ x 65’ , 16 rl. / box
590-256 Butyl in rolls, 1/8’’ x 5/8’’ x 65’ , 16 rl. / box
Adhesives/sealants Butyl
White575-732 73-A, Silicone 100%, 24 un. / boxAluminum gray
575-735 73-A, Silicone 100%, 24 un. / boxClear575-733 Black 73-A, Silicone 100%, 24 un. / box
575-731 73-A, Silicone 100%, 24 un. / box
Adhesives/sealants Silicone
575-251
575-731
575-651
575-501
590-201
575-751
580-122
590-101* Minimum order, 1 box
* Minimum order, 1 box
* Minimum order, 1 box
Part Color Specifications
Part Color Specifications
Part Color Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p28EN.pdf 1 2015-11-19 15:09:25
jimexs.com | [email protected]
Rubber FendersEdge Trims
29
50 feet - 1/4’’ thick100 feet - 3/16’’ thick
653-101Part Specifications
Rubber fenders
653-121
52 feet - 1/4’’ thick
653-141
100 feet - 3/16’’ thick653-111
652-601
Edge trim
Double lips, 1/8’’
Bulb on top, 1/8’’
652-101
652-806
Bulb on side, 1/8’’Bulb on side, 1/4’’652-201
Bulb on top (small), 1/8’’652-811
Edge trims with bulb
653-101
653-121
652-601
652-101 652-201
652-806 652-811
653-111
653-141
11/32’’
1/16’’
17/3
2’’
1/8’’9/32’’
3,5’’ 2,25’’
3/16’’
5,75’’
3/16’’
2,25
’’
2,25’’
0,25’’
1,56
’’
4,50’’
1,50’’
2,50
’’3/16’’
1’’
19/32’’13/32’’
1/8’’
19/3
2’’
1/8’’
1-3/32’’21/32’’7/16’’
5/8’
’
1/4’’
19/3
2’’ 1/
8’’
17/32’’
3/4’
’
1/8’’
1/8’’
1-7/
32’’
1/8’’
1/16’’
3/8’
’
13/32’’
29/3
2’’
Part Specifications
Part Specifications
- More models available, visit www.jimexs.com
- More models available, visit www.jimexs.com
C
M
J
CM
MJ
CJ
CMJ
N
p29EN.pdf 1 2013-05-06 11:44:04
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625 30
Part Width Length Rolls / box Thickness675-111 1/2’’675-126 1’’
100’100’
2412 1/16’’
1/16’’
675-206 3/8’’675-211 1/2’’
50’50’
3224 1/8’’
1/8’’
675-221 3/4’’675-226 1’’
50’50’
1612 1/8’’
1/8’’
675-236 1-1/2’’675-241 2’’
50’50’
86 1/8’’
1/8’’
675-306 3/8’’675-311 1/2’’
50’50’
3224 3/16’’
3/16’’
675-321 3/4’’675-326 1’’
50’50’
1612 3/16’’
3/16’’
675-336 1-1/2’’ 50’ 8 3/16’’
675-406 3/8’’675-411 1/2’’
37,5’37,5’
3224 1/4’’
1/4’’
675-421 3/4’’675-426 1’’
37,5’37,5’
1612 1/4’’
1/4’’
675-436 1-1/2’’ 37,5’ 8 1/4’’675-441 2’’ 37,5’ 6 1/4’’675-451 3’’ 37,5’ 4 1/4’’
675-521 3/4’’675-526 1’’
30’30’
1612 5/16’’
5/16’’
675-536 1-1/2’’ 30’ 8 5/16’’
675-611 1/2’’675-621 3/4’’
25’25’
2416
675-641 2’’ 25’ 6675-626 1’’ 25’ 12
675-911 1/2’’675-921 3/4’’
12,5’12,5’
2416 3/4’’
675-936 1-1/2’’ 12,5’ 8 3/4’’
3/4’’
675-926 1’’ 12,5’ 12 3/4’’
675-711 1/2’’675-726 1’’
25’25’
2416 1/2’’
1/2’’
675-736 1-1/2’’ 25’ 12 1/2’’
675-821 3/4’’ 12,5’ 16 5/8’’
Weatherstrips
Weatherstripping
Part Width Length Rolls / box Thickness
Part Width Length Rolls / box Thickness
Part Width Length Rolls / box Thickness
Part Width Length Rolls / box Thickness
Part Width Length Rolls / box Thickness
Part Width Length Rolls / box Thickness
Part Width Length Rolls / box Thickness
Part Width Length Rolls / box Thickness
3/8’’
3/8’’
3/8’’
3/8’’
675-XXX Series1 adhesive side, closed cell
C
M
J
CM
MJ
CJ
CMJ
N
p30EN.pdf 1 2015-11-19 15:14:49
jimexs.com | [email protected]
Rubber Bumpers
31
612-111
611-151
610-127
610-046610-102 610-014
610-053
610-007
610-092
610-053 4-3/4’’ 3-1/16’’ 3-3/4’’610-127 6’’ 2-3/4’’ 3-1/4’’610-102 6’’ 4’’ 3-3/8’’610-046 3’’ 3-1/4’’611-151 7-5/8’’ 2-1/4’’ 2’’610-007 7-7/8’’ 2-5/8’’ 2-1/4’’612-111 8-1/16’’ 5-1/2’’ 3-1/2’’610-092 8-3/8’’ 1-15/16’’ 1-15/16’’610-014 16’’ 2’’ 2’’
1/2’’1/2’’1/2’’1/2’’3/8’’3/8’’1/2’’5-11/32’’3/8’’
2-1/2’’2-1/2’’2-1/2’’3-5/16’’4-3/4’’4-1/2’’5-1/2’’5’’6-1/2’’
Rubber bumpersPart Lenght Width Height Holes Diameter Center - Center
7-3/4’’
625-008 8’’ 4-1/2’’ 3-3/4’’625-012 12’’ 4-1/2’’ 3-3/4’’625-022 22’’ 4-1/2’’ 3-3/4’’625-096 96’’ 4-1/2’’ 3-3/4’’625-106 6’’ 4’’ 3-7/8’’
----
2 holes 5/8’’, 3-1/8’’ C.-C.
ExtrusionsPart Lenght Width Height Specifications
Série 625
607-101 1’’ 13/16’’ 1/8’’607-111 1’’ 1’’ 5/32’’607-341 2-1/2’’ 1’’ 3/8’’607-351 1-1/4’’ 1-7/8’’ 3/8’’
----
Bumper stoppersPart External Diameter Height Hole Specifications
607-101 607-111
607-341 607-351
612-131 612-141
612-501
612-521 612-551612-541
612-161
612-131 8-1/2’’ 7-5/8’’ 5-5/8’’612-141 9-1/2’’ 6-1/4’’ 7-1/4’’612-161 9-1/4’’ 3-7/8’’ 3-3/4’’612-501 8’’ 8-1/2’’ 15-1/4’’612-521 7-3/4’’ 8-1/2’’ 12’’612-541 7’’ 6-3/16’’ 12-1/8’’612-551 - - -
RubberRubberRubberAluminumAluminumAluminumHolder for 612-501
Wheel ChocksPart Lenght Width Height Specifications
C
M
J
CM
MJ
CJ
CMJ
N
p31EN.pdf 1 2015-11-19 15:17:18
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Mud FlapsFloor Hardware
32
Part Thickness Width Grooves
680-501 1/8’’680-506 1/8’’
36’’36’’
WideNarrow
680-511 1/8’’680-516 1/8’’
48’’48’’
WideNarrow
680-521 1/4’’ 36’’ Wide
Floor mattings
Part Height Width Thickness
680-301 12’’680-331 12’’
12’’12’’
3/4’’9/16’’
Interlocking PVC Tiles
Sold per yard (3 feet), 25 yards roll
Part Thickness Width Height
626-124 1/4’’626-130 1/4’’
24’’24’’
24’’30’’
626-136 1/4’’ 24’’ 36’’
Mud flaps
Ultra-resistant acrylic
Ultra-resistant acrylic
Part Width Lenght Adhesive
940-101 1’’940-102 2’’
60’60’
Ultra-resistant acrylic
940-104 4’’940-106 6’’
60’60’
Ultra-resistant acrylic
940-112 12’’ 60’ Ultra-resistant acrylic
Anti-skid tapes with adhesive
626-124
Mud flap holders
626-00X
Rainure étroiteRainure large
940-106
940-112
940-101
Specifications
626-001 for 24’’ mud flap626-003 for 24’’ mud flapChrome
ZincPart Finish
680-331680-301
C
M
J
CM
MJ
CJ
CMJ
N
p32EN.pdf 1 2015-11-19 15:21:05
jimexs.com | [email protected]
Miscellaneous
901-151 ZinguéPart Finish Specifications
Folding steps
901-161 Galvanized901-201 Aluminum
6-1/2’’ wide, 4’’ C.-C. holes6-1/2’’ wide, 4’’ C.-C. holes6-3/4’’ x 8-1/2’’, Chrome finish
707-101 AluminumPart Finish Specifications
Document holders
707-121 Aluminum707-151 Plastic
9’’ x 1-5/8" (tube), 5-3/4’’ x 4’’6’’ diameter8-1/2’’W x 13-1/2’’H x 1-1/2’’D
801-001 AluminumPart Finish Specifications
Placard holders
801-003 Aluminum801-021 White Alu.
S/S offset clip - RegularS/S offset clip - "Split"S/S offset clip - Regular
801-023 White Alu.801-731 S/S
S/S offset clip - "Split"Offset clip only
Finish
801-001 801-003
707-101 707-121
901-151 901-201901-161
707-151
Roll-up door cables
707-201 S/SPart Finish Specifications
Receptacle for neck fuel tank
6-3/16’’, 2-1/4’’
707-201
Galvanized Stainless Steel Lenght
110”115”120”125”130”
905-101905-103905-106905-151
6’’ Size
905-121905-123905-126
-
Yellow ZincZincNylonSteel
Roll-up door rollers2-1/2’’ Size
905-101, 905-121
905-106, 905-126
905-103, 905-123
905-151
905-3XX 905-2XX
905-210905-215905-220905-225905-230
905-310905-315905-320905-325905-330
C
M
J
CM
MJ
CJ
CMJ
N
p33EN.pdf 1 2015-11-19 15:30:03
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625 34
750-001 Plastic Flettner TCX-2 - black750-006 Plastic Flettner TCX-2 - narrow base - black750-021
750-101 Plastic
Flettner TCX-2 - white
Flettner 2000 - black
Plastic
750-141 Plastic Adaptor for Flettner 2000
752-101 AluminumPart Finish Specifications
Specifications
Finish trim - plastic752-201 Aluminum Low profile752-211 Aluminum Black plastic handle
750-041 Plastic Adaptor for Flettner TCX
Air vents
805-462 8.25’’Part Lenght Width Height
805-504 19.17’’805-529 19.17’’
8.16’’7.50’’7.50’’
8.60’’8.25’’8.25’’
5.8A, 21 000 BTU, bottom connection11.6A, 42 000 BTU, rear connection11.6A, 42 000 BTU, tbottom connection
Heaters 12V
801-901 AluminumPart Finish Specifications
with shutter801-906 Aluminum without shutter801-951 Aluminum with screen, 1’’801-952 Aluminum with screen, 1-1/2’’801-953 Aluminum with screen, 2’’801-954 Aluminum with screen, 2-1/2’’801-955 Aluminum with screen, 3’’
801-957 Aluminum with screen, 6’’801-956 Aluminum with screen, 4’’
Louvered vents
Flettner Ventilators
Ventilation, Heating
Part Finish Specifications
750-001
801-90X801-95X
750-101
805-462 805-504
805-529
752-101
C
M
J
CM
MJ
CJ
CMJ
N
p34EN.pdf 1 2015-11-19 15:31:55
jimexs.com | [email protected]
Aluminum Rivets
Part D Grip Range
501-602501-603501-604501-606
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
3/16’’ (4.8 mm)
3/16’’ (4.8 mm) 501-608501-610
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
501-612501-614501-616501-618
3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
0.126’’ - 0.250’’ (3.2mm - 6.4mm)501-802501-804501-806
1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)
1/4’’ (6.4 mm)
1/4’’ (6.4 mm)501-808501-810
1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)
501-812501-814501-816
1/4’’ (6.4 mm)1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)
0.476’’ (12.1 mm)L
0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)
0.539’’ (13.7 mm)
0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)0.571” (14.5 mm)
0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)
0.728” (18.5 mm)
1.228” (31.2 mm)1.354” (34.4 mm)1.480” (37.6 mm)
L
D
0.190’’ - 0.250’’ (4.8mm - 6.4mm)
0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)1.000’’ - 1.125’’ (25.4mm - 28.6mm)
Aluminum 5056 blind rivets
Aluminum 5056 blind rivets
Aluminum 5056 blind rivets
Steel mandrel, open end
506-602506-603506-604506-606
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
3/16’’ (4.8 mm)
3/16’’ (4.8 mm) 506-608506-610
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
506-612506-802506-804506-806
3/16’’ (4.8 mm) 1/4’’ (6.4 mm)1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.501’’ - 0.625’’ (12.7mm - 15.9mm)506-808506-810 1/4’’ (6.4 mm)
0.376’’ - 0.500’’ (9.5mm - 12.7mm)1/4’’ (6.4 mm)
0.346’’ (8.8 mm)
0.531’’ (13.5 mm)0.602’’ (15.3 mm)0.720’’ (18.3 mm)
0.465’’ (11.8 mm)
0.839’’ (21.3 mm)0.976’’ (24.8 mm)0.406’’ (10.3 mm)0.531’’ (13.5 mm)0.661’’ (16.8 mm)0.780” (19.8 mm)0.917” (23.3 mm)
0.190’’ - 0.250’’ (4.8mm - 6.4mm)
0.062’’ - 0.125’’ (1.6mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.062’’ - 0.125’’ (1.6mm - 3.2mm)0.126’’ - 0.250’’ (3.2mm - 6.4mm)0.251’’ - 0.375’’ (6.4mm - 9.5mm)
Steel mandrel, end hollow
505-603505-604505-606505-608
3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
505-610505-612
3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
505-614505-616505-618
3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)
0.539’’ (13.7 mm)
0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)
0.190’’ - 0.250’’ (4.8mm - 6.4mm)0.126’’ - 0.125’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)1.000’’ - 1.125’’ (25.4mm - 28.6mm)
Steel mandrel, large open end
L
D
Open end
End hollow
Part D Grip Range L
Part D Grip Range L
C
M
J
CM
MJ
CJ
CMJ
N
p35EN.pdf 1 2013-05-06 11:43:45
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Aluminum Rivets
L
D
Open end
36
Part D Grip Range
511-602511-603511-604511-606
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
3/16’’ (4.8 mm)
3/16’’ (4.8 mm) 511-608511-610
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
511-612511-614511-616511-618
3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
0.126’’ - 0.250’’ (3.2mm - 6.4mm)511-802511-804511-806
1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)
1/4’’ (6.4 mm)
1/4’’ (6.4 mm)511-808511-810
1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)
511-812511-814511-816
1/4’’ (6.4 mm)1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)
0.476’’ (12.1 mm)L
0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)
0.539’’ (13.7 mm)
0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)0.571” (14.5 mm)
0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)
0.728” (18.5 mm)
1.228” (31.2 mm)1.354” (34.4 mm)1.480” (37.6 mm)
0.190’’ - 0.250’’ (4.8mm - 6.4mm)
0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)1.000’’ - 1.125’’ (25.4mm - 28.6mm)
Aluminum 5052 blind rivets
Aluminum 5052 blind rivets
Aluminum alloy mandrel, open end
515-603515-604515-606515-608
3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
515-610515-612
3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
515-614515-616515-618
3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)
0.539’’ (13.7 mm)
0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)
0.190’’ - 0.250’’ (4.8mm - 6.4mm)0.126’’ - 0.125’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)1.000’’ - 1.125’’ (25.4mm - 28.6mm)
Aluminum alloy mandrel, large open endPart D Grip Range L
C
M
J
CM
MJ
CJ
CMJ
N
p36EN.pdf 1 2013-05-06 11:48:39
jimexs.com | [email protected]
Stainless Steel Rivets
Part D Grip Range
521-602521-603521-604521-606
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
3/16’’ (4.8 mm)
3/16’’ (4.8 mm) 521-608521-610
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
521-612521-614
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
0.126’’ - 0.250’’ (3.2mm - 6.4mm)521-802521-804521-806
1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)
1/4’’ (6.4 mm)
1/4’’ (6.4 mm)521-808521-810
1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)
0.476’’ (12.1 mm)L
0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)
0.539’’ (13.7 mm)
0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)0.571” (14.5 mm)
0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)
0.728” (18.5 mm)
L
D
0.190’’ - 0.250’’ (4.8mm - 6.4mm)
0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)
Stainless steel blind rivetsCarbon steel mandrel, open end
Bout ouvert
531-602531-603531-604531-606
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
3/16’’ (4.8 mm)
3/16’’ (4.8 mm) 531-608531-610
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
531-612531-614
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
0.126’’ - 0.250’’ (3.2mm - 6.4mm)531-802531-804531-806
1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)
1/4’’ (6.4 mm)
1/4’’ (6.4 mm)531-808531-810
1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)
0.476’’ (12.1 mm)
0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)
0.539’’ (13.7 mm)
0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)0.571” (14.5 mm)
0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)
0.728” (18.5 mm)
0.190’’ - 0.250’’ (4.8mm - 6.4mm)
0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)
Stainless steel blind rivetsS/S mandrel, open end
Part D Grip Range L
C
M
J
CM
MJ
CJ
CMJ
N
p37EN.pdf 1 2013-05-06 11:43:39
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Steel Rivets
38
Part D Grip Range
541-602541-603541-604541-606
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
3/16’’ (4.8 mm)
3/16’’ (4.8 mm) 541-608541-610
3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
541-612541-614541-616541-618
3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm) 3/16’’ (4.8 mm)
0.126’’ - 0.250’’ (3.2mm - 6.4mm)541-802541-804541-806
1/4’’ (6.4 mm)0.020’’ - 0.125’’ (0.5mm - 3.2mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)
1/4’’ (6.4 mm)
1/4’’ (6.4 mm)541-808541-810
1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)
541-812541-814541-816
1/4’’ (6.4 mm)1/4’’ (6.4 mm)1/4’’ (6.4 mm)
0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)
0.476’’ (12.1 mm)L
0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)
0.539’’ (13.7 mm)
0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)0.571” (14.5 mm)
0.854” (21.7 mm)0.980” (24.9 mm)1.102” (28.0 mm)
0.728” (18.5 mm)
1.228” (31.2 mm)1.354” (34.4 mm)1.480” (37.6 mm)
L
D
0.190’’ - 0.250’’ (4.8mm - 6.4mm)
0.020’’ - 0.125’’ (0.5mm - 3.2mm)0.126’’ - 0.189’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)1.000’’ - 1.125’’ (25.4mm - 28.6mm)
Carbon steel blind rivets
Carbon steel blind rivets
Carbon steel mandrel, open end
545-603545-604545-606545-608
3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
545-610545-612
3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
545-614545-616545-618
3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm) 3/16’’ (3.2 mm)
0.598’’ (15.2 mm)0.724’’ (18.4 mm)0.850’’ (21.6 mm)
0.539’’ (13.7 mm)
0.976’’ (24.8 mm)1.098’’ (27.9 mm)1.228’’ (31.2 mm)1.350’’ (34.3 mm)1.476’’ (37.5 mm)
0.190’’ - 0.250’’ (4.8mm - 6.4mm)0.126’’ - 0.125’’ (3.2mm - 4.8mm)
0.251’’ - 0.375’’ (6.4mm - 9.5mm)0.376’’ - 0.500’’ (9.5mm - 12.7mm)0.501’’ - 0.625’’ (12.7mm - 15.9mm)0.626’’ - 0.750’’ (15.9mm - 19.1mm)0.751’’ - 0.875’’ (19.1mm - 22.2mm)0.876’’ - 1.000’’ (22.2mm - 25.4mm)1.000’’ - 1.125’’ (25.4mm - 28.6mm)
Carbon steel mandrel, large open end
Bout ouvert
Part D Grip Range L
C
M
J
CM
MJ
CJ
CMJ
N
p38EN.pdf 1 2013-05-06 11:48:32
jimexs.com | [email protected]
Rivets, Threaded Inserts and Rods
906-014 5/8’’ 3-1/2’’ 14’’906-016 5/8’’ 3-1/2’’ 16’’906-018 5/8’’ 3-1/2’’ 18’’906-020 3-1/2’’ 20’’906-022 5/8’’ 3-1/2’’ 22’’
6’’6’’
906-010 5/8’’ 3-1/2’’ 10’’906-012 5/8’’ 3-1/2’’ 12’’
6’’6’’
6’’6’’6’’
Threaded U-bolts
Rivets
Threaded inserts
Part A B C D
5/8’’
906-205 5/8’’ 20-1/2’’ 3-1/2’’906-185 5/8’’ 18-1/2’’ 3-1/2’’
906-225 5/8’’ 22-1/2’’ 3-1/2’’906-245 5/8’’ 24-1/2’’ 3-1/2’’906-265 26-1/2’’ 3-1/2’’906-285 5/8’’ 28-1/2’’ 3-1/2’’
Threaded straight rodsPart A Lenght D
5/8’’
906-305 5/8’’ 30-1/2’’ 3-1/2’’906-325 5/8’’ 32-1/2’’ 3-1/2’’906-345 34-1/2’’ 3-1/2’’906-365 5/8’’ 36-1/2’’ 3-1/2’’
5/8’’
906-385 5/8’’ 38-1/2’’ 3-1/2’’906-405 5/8’’ 40-1/2’’ 3-1/2’’906-425 42-1/2’’ 3-1/2’’906-445 5/8’’ 44-1/2’’ 3-1/2’’
5/8’’
906-465 46-1/2’’ 3-1/2’’5/8’’
906-000 6’’ x 1-1/2’’ x 1/2’’
Tie platePart Specifications
Material
0.080”-0.375” (2.0mm - 9.5mm)
551-604551-607551-806
3/16” (4.8 mm) 1/4” (6.4 mm) 1/4” (6.4 mm)
0.062”-0.270” (1.6mm - 6.9mm) SteelSteelSteelSteel
Steel
0.214”-0.437” (5.4mm - 11.1mm) 3/16” (4.8 mm)
551-810 0.350”-0.625” (8.9mm - 15.9mm)
0.080”-0.375” (2.0mm - 9.5mm)
552-604552-607552-806
3/16” (4.8 mm)1/4” (6.4 mm) 1/4” (6.4 mm)
0.062”-0.270” (1.6mm - 6.9mm)0.214”-0.437” (5.4mm - 11.1mm)
3/16” (4.8 mm)
552-810 0.350”-0.625” (8.9mm - 15.9mm)
0.080”-0.375” (2.0mm - 9.5mm)
553-604553-607553-806
3/16” (4.8 mm)1/4” (6.4 mm) 1/4” (6.4 mm)
0.062”-0.270” (1.6mm - 6.9mm)0.214”-0.437” (5.4mm - 11.1mm)
3/16” (4.8 mm)
553-810 0.350”-0.625” (8.9mm - 15.9mm)
Part Thread Grip Range
0.165”-0.260” (4.2mm - 6.6mm) 555-101555-106555-111
1/4-20 UNC1/4-20 UNC
0.027”-0.165” (0.7mm - 4.2mm)
0.027”-0.150” (0.7mm - 3.8mm) 5/16-18 UNC555-116555-121
5/16-18 UNC3/8-16 UNC
0.150”-0.312” (3.8mm - 7.9mm) 0.027”-0.150” (0.7mm - 3.8mm)
AluminumAluminumAluminumAluminum
S/SS/SS/SS/S
SteelSteelSteelSteel
551-604
555-101
906-000
MaterialPart Diameter Grip Range
MaterialPart Diameter Grip Range
MaterialPart Diameter Grip Range
C
M
J
CM
MJ
CJ
CMJ
N
p39EN.pdf 1 2013-10-08 08:56:37
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Parts Index
40
Part Page Part Page Part Page Part Page Part Page Part Page
202-255202-257202-261202-265202-301202-601203-001203-201203-251203-261203-271203-283203-701203-706203-801203-806203-821204-108204-112204-116204-308204-312204-316204-404204-412204-418204-508204-728204-801204-806204-821204-826204-841204-846204-901210-105210-111210-201210-203210-205210-207210-301210-303210-501212-101212-201212-303213-101213-103213-105213-201
171717171718141414141414141420202018181818181818181817181717171717171814141414141414141414141414141414
213-205213-301213-303215-101215-104215-109215-112215-117215-120215-125215-128215-133215-136215-141215-217215-220215-225215-228215-233215-236215-241216-101216-104216-109216-112216-117216-120216-125216-128216-133216-136216-141216-217216-220216-225216-228216-233216-236216-241218-109218-117218-120218-125218-133218-136218-141218-217218-220220-501220-503220-507
141414151515151515151515151515151515151515151515151515151515151515151515151515151515151515151515131313
220-509220-801220-806220-821220-901220-905220-911221-101221-106221-186221-196221-201221-203221-211221-301221-311221-521221-708221-851221-901221-911222-051222-111222-115222-121222-123222-125222-201222-203222-205222-207222-209222-211222-213222-215222-217222-219222-221222-223222-225222-227222-451222-581222-583222-585222-589222-621222-641222-801222-802222-803
1312121213131311111111111111111112111112121099999
1010101010101010101010101010109
1010977
101010
222-804222-805222-806222-807222-808222-809222-810222-930222-931222-932222-935222-936222-937222-940222-941222-942222-945222-946222-947222-951222-952222-953222-954222-955222-956222-957222-985222-987223-001223-101223-103223-105223-111223-121223-201223-203223-205223-207223-221223-351224-401224-406224-411224-416224-457224-481224-491224-601224-606224-801224-921
10101010101010
9999999999999999999
1010
813131313131313131313
888885888866
224-926225-101225-102225-103225-191225-201225-202225-203225-291225-301225-401225-491225-501225-502225-503225-521225-522225-523225-591225-596225-701225-791225-819225-851225-853225-855225-951225-951225-955225-961225-965226-001226-002226-003226-101226-102226-103226-191226-195226-199226-406226-451226-452226-453226-751226-771227-216227-221227-226227-236227-241
622222222533333333335555552332244444444444446644444
118-124118-136118-148118-160118-236118-248118-260118-436118-448118-460118-536118-548118-560124-124124-136124-148124-160124-172124-236124-248124-260124-272128-012128-018128-024130-136130-148130-160130-172130-236130-248130-260130-272136-124136-136136-148136-160136-172136-236136-248136-260136-272202-120202-201202-211202-216202-221202-231202-241202-251202-253
111111111111111111111111111111111111111111
178
17181717171717
C
M
J
CM
MJ
CJ
CMJ
N
p40EN.pdf 1 2015-11-20 08:46:51
jimexs.com | [email protected]
Parts Index
235-702235-703235-704235-705237-101237-111237-121237-131240-101240-103240-106240-111240-121240-151240-201240-221240-306240-351240-353240-361241-101241-401242-101242-106242-111242-116242-131242-136242-141242-151242-181242-191243-101243-106243-111243-116243-121243-126243-131243-136243-141243-146243-161243-166243-171243-176243-191243-196251-111251-121251-131
33332222
191919191919202019
666
19191919191919191919191920202020202020202020202020202020222222
251-141251-145251-148251-151251-161251-171251-181251-201251-206251-211251-216251-221251-226251-231251-236251-241251-243251-311251-321251-351251-401251-501254-151254-501254-506260-101260-151261-108261-110261-112261-116261-118281-022281-050281-100283-013283-035283-065283-100285-013285-030285-060285-090285-120287-035287-045287-060287-080287-097287-135289-030
222222222222222222222222222222222222222222222222222424242424242423232323232323232323232323232323232323
289-060289-090289-120291-050291-075291-100291-150291-200291-250293-020293-030293-060293-100295-087295-120297-050297-075297-100297-150297-200297-250298-056298-079298-090298-203299-001299-011299-013299-015299-017299-036299-041299-101299-111299-118299-121299-131299-141299-146299-151299-166323-110323-112323-114323-116323-118323-120323-122323-124323-126323-128
232323232323232323232323232323232323232323232323232424242424242424242424242424242421212121212121212121
323-210323-212323-214323-216323-218323-220323-222323-224323-310323-312323-314323-316323-318323-320323-322323-324323-326323-328323-330323-332323-334323-336323-508323-510323-512323-514323-516323-518323-520323-522323-524323-526323-528323-530323-532323-534323-536323-538323-540323-542323-548323-560323-612323-614323-616323-618323-620323-622323-624323-626323-628
212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121212121
323-636323-648400-101400-109410-021410-091410-101410-106410-111410-121410-131410-201410-203410-205410-207410-211410-306410-321413-171413-173413-175413-177413-179413-181413-183413-185413-187413-191413-193413-201413-203413-205413-209413-211413-213413-215413-217413-219413-221413-223413-225413-227413-229413-260413-261413-262413-263413-264413-265413-266413-267
212127271919191919191919191919192020262626262626262626252525252525252525252525252525252525252525252525
227-246227-951227-957228-201228-206228-421228-423228-425228-431228-441228-451228-461228-481228-483228-491229-106229-121230-101230-201230-201230-221230-301230-311230-321230-501230-511230-511230-521230-531230-531235-101235-102235-103235-104235-105235-201235-202235-203235-204235-205235-301235-302235-303235-304235-305235-306235-307235-308235-309235-310235-701
444887777777777
1212
6666666666
1323222224444455555555553
Part Page Part Page Part Page Part Page Part Page Part Page
C
M
J
CM
MJ
CJ
CMJ
N
p41EN.pdf 1 2015-11-20 08:47:24
T 450.464.9999 - 1.866.447.5656 | F 450.464.9992 - 1.866.447.5625
Parts Index
42
Part Page Part Page Part Page Part Page Pièce Page Part Page
414-529414-531414-533414-535414-537414-539414-541414-543414-545414-547414-549418-101418-102418-103418-104418-105418-111418-112418-113418-114418-121418-122418-123418-124418-125418-126418-131418-132418-134418-135418-136418-137418-138418-139465-100465-109465-115465-121465-131465-141501-602501-603501-604501-606501-608501-610501-612501-614501-616501-618501-802
262626262626262626262627272727272727272727272727272727272727272727272020202020203535353535353535353535
501-804501-806501-808501-810501-812501-814501-816505-603505-604505-606505-608505-610505-612505-614505-616505-618506-602506-603506-604506-606506-608506-610506-612506-802506-804506-806506-808506-810511-602511-603511-604511-606511-608511-610511-612511-614511-616511-618511-802511-804511-806511-808511-810511-812511-814511-816515-603515-604515-606515-608515-610
353535353535353535353535353535353535353535353535353535353636363636363636363636363636363636363636363636
515-612515-614515-616515-618521-602521-603521-604521-606521-608521-610521-612521-614521-802521-804521-806521-808521-810531-602531-603531-604531-606531-608531-610531-612531-614531-802531-804531-806531-808531-810541-602541-603541-604541-606541-608541-610541-612541-614541-616541-618541-802541-804541-806541-808541-810541-812541-814541-816545-603545-604545-606
363636363737373737373737373737373737373737373737373737373737383838383838383838383838383838383838383838
545-608545-610545-612545-614545-616545-618551-604551-607551-806551-810552-604552-607552-806552-810553-604553-607553-806553-810555-101555-106555-111555-116555-121575-216575-251575-252575-253575-501575-502575-503575-651575-652575-653575-731575-732575-733575-735575-751575-752575-753575-754575-758580-122590-101590-106590-201590-206590-211590-216590-251590-256
383838383838393939393939393939393939393939393928282828282828282828282828282828282828282828282828282828
590-261590-266590-361607-101607-111607-341607-351610-007610-014610-046610-053610-092610-102610-111610-127611-151612-131612-141612-161612-501612-521612-541612-551625-008625-012625-022625-096625-106626-001626-003626-124626-130626-136652-101652-201652-601652-806652-811653-101653-111653-121653-141675-111675-126675-206675-211675-221675-226675-236675-241675-306
282828313131313131313131313131313131313131313131313131313232323232292929292929292929303030303030303030
413-270413-271413-272413-273413-274413-275413-276413-277413-280413-281413-282413-283413-284413-285413-286413-287413-291413-293413-295413-299413-400413-401413-403413-405413-409413-421413-423413-425413-427413-429413-433413-435413-437413-439413-441413-443413-445414-501414-503414-505414-507414-509414-511414-513414-515414-517414-519414-521414-523414-525414-527
252525252525252525252525252525252525252526262626262626262626262626262626262626262626262626262626262626
C
M
J
CM
MJ
CJ
CMJ
N
p42EN.pdf 1 2015-11-20 09:13:57
jimexs.com | [email protected]
Parts Index
680-501680-506680-511680-516680-521707-101707-121707-151707-201750-001750-006750-021750-041750-101750-141752-101752-201752-211801-001801-003801-021801-023801-731801-901801-906801-951801-952801-953
32323232323333333334343434343434343433333333333434343434
801-954801-955801-956801-957805-462805-504805-529901-151901-161901-201905-101905-103905-106905-121905-123905-126905-151905-210905-215905-220905-225905-230905-310905-315905-320905-325905-330906-000
34343434343434333333333333333333333333333333333333333339
906-010906-012906-014906-016906-018906-020906-022906-185906-205906-225906-245906-265906-285906-305906-325906-345906-365906-385906-405906-425906-445906-465915-101915-104915-109915-112915-117915-120
39393939393939393939393939393939393939393939161616161616
915-125915-128915-133915-136915-141915-144915-217915-220915-225915-228915-233915-236915-241915-244916-101916-104916-109916-112916-117916-120916-125916-128916-133916-136916-141916-217916-220916-225
16161616161616161616161616161616161616161616161616161616
916-228916-233916-236916-241917-109917-117917-120917-125917-133917-136917-141917-217917-220917-225917-233917-236917-241918-117918-120918-125918-133918-136918-141940-101940-102940-104940-106940-112
16161616161616161616161616161616161616161616163232323232
675-311675-321675-326675-336675-406675-411675-421675-426675-436675-441675-451675-521675-526675-536675-611675-621675-626675-641675-711675-726675-736675-821675-911675-921675-926675-936680-301680-331
30303030303030303030303030303030303030303030303030303232
Part Page Part Page Part Page Part Page Part Page Part Page
NOTES
C
M
J
CM
MJ
CJ
CMJ
N
p43EN.pdf 1 2015-11-20 09:14:33
Find the Jimexs family logosfor exceptionnal quality products
www.jimexs.com www.j-boxs.com www.j-lite.com www.jlite-o�road.com
To find out about our new products, don’t hesitateto visit our websitewww.jimexs.com
C
M
J
CM
MJ
CJ
CMJ
N
p44EN_cover.pdf 1 2015-11-20 15:33:56
C
M
J
CM
MJ
CJ
CMJ
N
coverBen.pdf 1 2015-11-20 10:37:08