0j - defense technical information · pdf file0j distributed by: nt iteckmncal informtwwa...
TRANSCRIPT
AD-775 861
POWER CARTRIDGE HANDBOOK. FOURTHEDITION
Naval Air Systems CommandWashington, D. C.
15 August 1973
0J
DISTRIBUTED BY:
Nt ITeckMncal Informtwwa SernicU. S. CEPARTMENT OF C~MMERCE5285 Port Rpyal Road, Springfield Va. 22151
Ito NAVAIR REPORT No. 7836
DEPARTMENT OF THE NAVYNAVAL AIR SYSTEMS COMMAND
POWER CARTRIDGEHANDBOOK
D nFOURTH EDITION
15 AUGUST 1973
NATIONAL TECH NICAL II Apr~ o u;,INFORMATION SERVICE-
Springfe'd VA 22151
L-1 A ý
NAVAIR REPORT No. 7836
DEPARTMENT OF THE NAVY
NAVAL AIR SYSTEMS COMMAND
POWER CARTRIDGEHANDBOOK
.4
FOURTH EDITION
/IV Q C
I Appr•.'• 4 fo F'5• :e~eaSm
lksLibudon UnIxmited
PUBLISHED BY DIRECTION OF THE
COMMANDER OF THE NAVAL AIR SYSTEMS COMMAND
15 AUO 1973FOREWORD
The Navy Power Cartridge Handbook, NAVAIR Report No. q836, wasfirst published in October 1958 to fill a need for a readily availablesource of information on power cartridges. A second editiont was pub-lished in September 1961, and a third edition in March 1967. Thisfourth edition is published to reflect changes in the status of cart-ridges since the last edition, to include new cartridges accepted forNavy service use in the interim, to expand the information publishedon each cartridge, and to include information on proprietary cartridgesaccepted for Navy use. Cartridges are treated in numerical sequence byMARK-MOD and Source Control Drawing Number assignments (see Contents),anc information on percussion primers and electric igniters widely usedin Navy cartridges is included. The sections on the interior Ballis-tics and Optimization of Cartridge Actuated Devices have been deleted.The information on each cartridge and igniter is presented on the twosides of a single sheet to facilitate future changes, additions, de-letions and revisions, and to preserve the numerical order of presen-tation as additions are made. These changes and expansions in presen-tation have necessitated a complete revision in this edition.
The information on each cartridge is presented by means of aquarter-section isometric drawing showing the relations between thecomponents in the cartridge, an outline drawing showing the nominalenvelope diimc 'tsions of the cartridge, a wiring schematic for electric-
Sally fixed ci tridges, and a tabulation of applicable irformation onthe cartridge. Primers and igniters are treated in a comparable manner,with current-tixie functioning curves included for electrically firedigniters. Infcr--ation on proprietary cartridges is necessarily limitedto that revealeG on the source control drawings and in the qualifica-tion tests. Brief explanations of the several items of informationgiven for each cartridge (when available or applicable) are givei below.
Envelope Dimensions - The dimensions given on the outline drawingsare the nominal dimensions; consult documentary drawings for tolerances.
Specification No. - The identifying number of the document govern-Sing the fabrication and acceptance of fully documented items for ser-
vice use.
Data List or List of Drawing No. The identifying number of thedocument listing the drawings ard specifications documenting the item.
Source - The manufacturer of the proprietary item.
Source Cor-trol Drawing No. - The identifying number of the docu-ment governing the fabrication and acceptance of proprietary items forservice use.
Federal Stock No. - The identifying number of the iten in theFederal Supply Service, General Services Administration.
0"*i i
/
DOD Code No. - The identifying number of the item assigned by theDepartment of Defense.
Qualification - The level of acceptance for use accorded the car-tridge, usually as defined in MIL-D-21625 or MIL-D-81303. MilitarySpecification MIL-D-21625 provides general guides for the design ofcartridges to be used in cartridge actuated devices (except storeselration cartridges) and establishes the general test program forassuring that the requirements of performance, safety, soundness ofmechanical design and resistance to the environment generally encoun-tered in storage, handling and service use have been attained. Mili-tary Specification MIL-D-81303 is the complimentary specification forcartridges used in store separation equipment. Both specificationsdefine four progressive levels of acceptance for use. A Type I re-lease ceitifies that the cartridge is safe to handle and install indevices of application. It is required prior to any flight of Navyaircraft or missile bearing the cartridge. A Type II release certi-fies that the cartridge may be used in devices of application onflights of aircraft involving Navy personnel. A Type III-A releasecertifies the cartridge for admission into the Navy supply system as afully documented cartridge for service use. A Type III-B release cer-tifies the cartridge for service use in those instances when the cart-ridge can be documented only by a Specification Control or Source Con-trol Drawing because of proprietary rights, patents, etc. A Type IVrelease certifies the cartridge for use in a new application after ithas been granted a Type III-A or Type III-B release in one or more re-lated applications. In this handbook, a Type III-A or Type III-B qua-lification listing for a cartridge having multiple applications im-plies that Type IV releases have been accorded the cartridge for eachsucceeding application after the first.
Table I compares the testing programs of the two specifications bytabulating the tests and number of cartridges required on each testunder the two specifications. Under MIL-D-21625, a Type II release maybe converted to Type III-A or Type III-B release upon submission ofapplicable documentation, and the Naval Air Systems Command may author-ize interim procurement of a cartridge for service use on the basis ofa Type II release. MIL-D-81303 standardizes both the envelope dimen-sions (except length) and the electric circuitry for all store separa-tion cartridges. It also requires high-altitude/high temperature andiced rack tests not required in MIL-D-21625.
Service Life - The estimated length of time that the cartridge isexpected to perform acceptably. Estimates are based on the resultsfrom qualification and surveillance tests of the cartridge. The totalservice life is the length of time from fabrication of the cartridgeto its mandatory removal from service. The installed service life isthe length of time the cartridge may remain in a service device. How-ever, this length of time is measured from the time the hermetic sealof the cartridge container is opened, even though the cartridge is notinstalled immediately in a service device. Further, the aggregate ofthe times the cartridge is held in its hermetically sealed containerand is installed in a service device shall not exceed the total servicelife set for the cartridge. -"
5~e-
15 AUG 1973
Temperature Limits - The temperature range over which acceptableperformance of the cartridge is established for the intended applica-tion.
Cook-Off Temperature - The maximum temperature (within 25 0 F)which the cartridge can sustain for one hour without auto-igniting.
Impetus - The theoretical impetus of the cartridge computed fromthe impetus of the igniter, booster and main charges.
No-Fire, Electric Igniter - The maximum firing current which doesnot cause ignition within five minutes.
All-Fire, Electric Igniter - The minimum firing current whichcauses ignition within 50 milliseconds.
Recommended Firing, Electric Igniter - The firing current whichcauses ignition within an acceptable time, usually less than tenmilliseconds.
No-Fire, Percussion Igniter - The maximum energy which does notcause ignition with the specified firing pin.
All-Fire, Percussion Igniter - The minimum energy which causesignition with the specified firing pin.
Recommended Firing, Percussion Igniter - The indentation of theI primer by the specified firing pin which assures ignition.
Brid~e Resistance - The resistance of the bridge or bridgesmeasured in fully assembled igniters, between electrode and case ifcase-grounded, and between pins if not case-grounded. Most ignitershave two bridges, but they may be wired in parallel, with one pin com-mon, or with two pins per bridge.
Bridge Material - The diameter and material of the bridge wire.
Ignition Material - The first-fire material of the igniter.
Booster Material, Igniters - The material ignited by the first-fire material which in turn ignites the booster or main charge of thecartridge.
Nominal Delay - The delay time at about 70'F.
Specification Limits - The acceptable delay times over the operat-ing range for which the cartridge is qualified.
Granulation - The shape and size of the individual pieces of pro-pellant. In the tabulations, l-perf indicates a cylindrical grain withone axial perforation, 7-perf indicates a cylindrical grain with sevenperforations, D is the diameter of the grain, d is the diameter of the
* perforation(s) and h is the length of the grain.
4<.
Flame Temperature - The theoretical adiabatic flame temperatureof the propellant defined in the relation F = NRTv. I )
Applications - The specific or class of cartridge actuated devicesfor which the cartridge is qualified.
As new applications for cartridges arise, it is inevitable thatnew cartridges will be developed. However, in the interest of keepingthe Navy's inventory of cartridges to a practical minimum for logisticpurposes, service approved cartridges should be used in new applica-tions whenever feasible. The use of approved cartridges also elimi-nates the delays and costs involved in developing and qualifying newcartridges. In many cases minor adjustments in the design of cartridge-powered devices make it feasible to employ existing cartridges withoutcompromising the performance of the device.
5.c
4.'
'• TABLE I
Specirication MIL-D-21625 MIL-D-81303Type of Release I II III IV I II III IV
Cartridges Required 42 200 18 30 54 180 30
Expended in Tests 42 156 18 30 54 168 30
Visual Inspection 42 200 18 30 54 180 30
Radiographic Inspection 42 200 18
Leak 42 200 18 30 54 180 30
40-Foot Drop 6 6 6 6
6-Foot Drop 6 6 6 6
Shock 6 12 6
Vibration 6 12 6 12
Functional at -65OF 6 12 6 12 12 6
1 Functional at +70OF 6 12 6 6 12 12 12
Functional at +200OF 6 12 6 12 12 6
Temp-Humidity Cycling 18 18 18
Salt Fog 12 12
High Temp. Storage 18 18
Cook-off 12 12
High-Temp. Exposure 12 12
High Altitude at -65 0 F 12 12
High Altitude at +200OF 12
Iced Rack 12
NOTE: Under MIL-D-21625, a Type II release may beconte a Type IIIrelease upon submission of appropriate documentation.
6'
TABLE OF CONTENTS Page'p
MARK MOD
1 3 Cartridge, Impulse.............................. 1-32 1 Cartridge, Impulse ......... . ................. 2-13 0 Cartridge, Delay ................................. 3-03 1 Cartridge, Impulse ............................... 3-14 2 Cartridge, Delaye................o................. .4-25 2 Cartridge, Delay .................................. 5-26 2 Cartridge, Delay ............................... .6-28 0 Cartridge, Impulse... ................. 6-2........8-09 0 Cartridge, Impulse ...... o....... .................. 9-0
10 0 Cartridge, Impulse ..................... 9......... Cl0-010 0 Ignition Element, Electric ...................... I10-011 0 Ignition Element, Electric ...................... I11-0
13 0 Ignition Element, Electric...................... 113-014 0 Cartridge, Impulse .............................. C14-014 0 Ignition Element, Electric ........................ 114-016 0 Cartridge, Delay ................................ 16-017 0 Ignition Element, Electric ...................... 117-017 1 Cartridge, Impulse .............................. C17-118 0 Cartridge, Impulse ................................ CA18-018 0 Cutter, Cartridge Actuated ...................... CU18-019 0 Cartridge, Impulse ................................ 19-022 0 Ignition Element, Electric ....................... 22-023 0 Cartridge, Impulse .............................. 23-025 0 Cartridge, Actuator ............................... 25-026 0 Cartridge, Actuator .............................. 26-027 0 Cartridge, Actuator.............................. 27-028 0 Cartridge, Actuator ............................. 28-029 0 Cartridge, Actuator ............................. 29-031 0 Cartridge, Delay ................................. 31-033 1 Cartridge, Impulse ............................... 33-135 0 Cartridge, Delay ................................ 35-036 0 Cartridge, Delay ................................ 36-037 0 Cartridge, Impulse .............................. 37-038 0 Cartridge, Impulse ............................... 38-039 0 Cartridge, Impulse ............................... 39-040 0 Cartridge, Impulse .............................. 40-042 0 Cartridge, Impulse .............................. 42-043 0 Cartridge, Impulse .............................. 43-044 0 Cartridge, Impulse .............................. 44-045 0 Cartridge, Impulse .............................. 45-046 0 Cartridge, Impulse .............................. 46-047 0 Cartridge, Impulse .............................. 47-049 0 Cartridge, Impulse .............................. 49-050 0 Cartridge, Impulse ............................... 50-051 1 Cartridge, Impulse .............................. 51-152 0 Cartridge, Impulse .............................. 52-053 0 Cartridge, Impulse ............................... 53-0
7<
TABLE OF CONTENTS Pa~ge
MARK MOD
64 0 Cartridge, Impulse .................................. 64-066 0 Cartridge, Impulse .............................. 66-067 0 Cartridge, Impulse .................................. 67-073 0 Cartridge, Impulse .................................. 73-076 0 Cartridge, Delay ..................................... 76-082 0 Cartridge, Impulse .................................. 82-083 0 Detonator, Electric ................................. 83-084 0 Cartridge, Delay ..................................... 84-085 0 Cartridge, Impulse .................................. 85-086 0 Cartridge, Delay ................................ 86-087 0 Cartridge, Delay ................................ 87-097 0 Cartridge, Impulse .................................. 97-0
101 0 Cartridge, Delay. .................................... 101-0102 1 Primer, Stab ......................................... 102-1103 0 Cartridge, Impulse .... .......................... 103-0104 0 Cartridge, Impulse ............................... 104-0105 0 Cartridge, Impulse .............................. 105-0FX107 5 Cartridge, Impulse .............................. EX107-5119 0 Cartridge, Test Turbojet Engine .................... 119-0124 0 Cartridge, Impulse .............................. 124-0125 0 Cartridge, Impulse .............................. 125-0127 0 Cartridge, Impulse .............................. 127-0129 0 Cartridge, Impulse .............................. 129-0131 0 Cartridge, Impulse .............................. 131-0136 0 Cartridge, Delay ................................ 136-0137 0 Cartridge, Delay ................................ 137-0141 0 Cartridge, Delay ................................. 141-0142 0 Cartridge, Delay ................................ 142-0243 2 Cartridge, Igniter, Turbojet Engine ................ 243-2
CCU-4/A Cartridge, Delay .................................... CCU--4/AMXU-4A Cartridge, Engine Starter ........................... MXU-4AMxU-4A/A Cartridge, Engine Starter ......................... MXU-4A/A
AVA I RDrawing
2406377 Cartridge, Impulse .............................. 2406377251.8141 Scquib, Electric ................................. 25181412518358 Squib, Electric ................................. 25183582518359 Squib, Electric ................................. 25183592518373 Cartridge, Cable Cut+er ............................ 25183732518426 Cartridge, Impulse ............................... 25184262518431 Cartridge, Impulse .............................. 25184312518493 Grain, Propellant ............................... 2518493
8<
TABLE OF CONTENTSPage
NAVAIRwnq
2518508 Cartridge, Delay ................................ 25185082518509 Cartr dge, Aircraft Fire Extinguisher ............. 25185092518519 Cartridge, Aircraft Fire Extinguisher ............. 25185192519524 Squib, Electric ................................. 25195242519527 Cartridge-Vial, Life Raft .......................... 25195272519590 Cartridge, Aircraft Fire Extinguisher ........... 25195902519608 Cartridge, Impulse .............................. 25196082319614 Cartridge, Aircraft Fire Extinguisher ............. 25196142519631 Squib, Electric ................................. 25196312519676 Cartridge, Gas Generation .......................... 25196762519696-1 Cartridge, Reduced Charge Primary ................ 2519696-12319696-2 Cartridge, Secondary Catapult .................... 2519696-22519697 Cartridge, Primary Catapult ........................ 25196972519698 Cartridge, Impulse Guillotine ...................... 25196982519707 'artridge, Aircraft Fire Extinguisher ............. 25197072519953 Cartridge, Impulse .............................. 25199532519954 Cartridge, Impulse .............................. 25199542520002 Cartridge, Impulse Drogue .......................... 25200022520045 Cartridge, Impulse .............................. 2520045
294,,S100 Cartridge, Impulse .............................. 294AS1002'97'SI00 Cartridce, Delay................................. 297AS100309AS100 Cartridge, Delay ................................ 309AS100310'S100 Cartridge, Delay ................................ 310AS100314AS100 Cartridge, Impulse .................................. 314AS100315ASI00 Cartridge, Impulse .............................. 315AS100376AS100 Cartridge, Impulse .............................. . 376AS100548AS100 Cartridge, Delay ................................ 548AS1'JO626A-S100 Cartridge, Impulse .............................. 626AS100644AS100 Cartridge, Impulse .............................. 644ASI00682;.S100 Cutter, Cartridge Actuated ......................... 682AS100683S..IS00 Cartridge, Impulse .............................. 685AS100
Pj-JFIX M1
:1287.1 Cartridge, Impulse ................................... M28A1*129A2 Cartridge, Impulse .............................. :29A2131Al Cartridge, Impulse .................................. .;431AI.142 Primer, Percussion ........ ........................... M42:155 Ignition Element, Electric ...................... 155.173 Cartridge, Impulse .................................... M73•191 Cartridge, Impulse ................................ .... .. M91193 Cartridge, Delay ...................................... M93..1•19 Cartridge, Impulse ..................................... M119• i129 Cartridge, Delay ..................................... 129
9 <
TABLE OF CONTENTSPage
PREFIx M
'1155 Cartridge, Initiator Delay ...................... M155
SUFFIX M
50:1 Primer, Percussion ................................. 50M72:1 Priner, Percussion .................................... 7214116"1 Primer, Percussion .................................... .16M120A Primer, Percussicn. .............................. 120M
DOD CODL
"*IW43 Cartridge, Reduced Charge Primary ................... MW43"11145 Cartridge Unit, Aircraft Fire Zxtinguisher
2-Pin ::o. 1, MM 3 ................................. MW45IW4G Irgnitcr, "rangible Pillar Assembly :1K 3 ......... M446"-47 Cord, Ainiature Detonating .......................... MW471W48 -Jc tonator Assembli.y .............................. M148
P:' 0 - 1 I7.:% Y
3UP S-63 S-Luib, Dupont P/X; S-68, 10 Grain ................. DUP S-68.,)L 3215 Cartridge, Impulse, Holex P/N: 3215 ............... HOL 3215"iB7 27722 Cartridge, Drogue, ;lartin B;aker P/.
:t1 ::U-27722 .................................... MBE 27722MiE 35736 Zartridge, Secondary Catapult, :lartin Baker
P/N IEIU-35756 .................... .M...........M-E 35756IBE 41184 Cartridge, IIErness Retraction and Seat Firing,
11artin Daker P/11 rIBL3U-41184 ................... MZL 42.184M:L 41880 Cartridge, Guillotine and Harness Release,
"lartin ra],er P/11 MDB U-41880 ................... MBE 41380:ICS 807207 Gernerator, Gas, .AcCormick-Selph P/:; 807207 ..... MCS 807207.i:S 807268 Thruster, Cartridge Actuated, "IcCormick-Selph
P/U; 807268 ................................... MCS 807268::CS 807274 Cartridge, Delay, M'cCormick-Seleh
P/U 807274 ....................... .. . CS 807274.iSz', T7.96850 Cutter, '.Mebbing, Cartridae Actuatad, .Iine
Safety Appliances P/,; TA96350 ............... 'iSA TA968502245116 Cartridge-, T.-ay Thrustr, Ordnance Engineering-1 :-ssociater P/N 2245116-1 .................... )EA 2245116-1
)LA 2248130 Cartridge, Delay, Ordnance Engineering.ssoc4 :tes P/: 2248130 ...................... OEA 2248130
Pq' 010382'5 Generatoz, Gas, Pacific Scientific P/N-1 01C 82C-. .................................. PSC 0103826--l
UjPC 1004-1 Genorator, ]as, Universal Pro'.ulsion P/N1004-4 ....................................... 'UP, 1004-4
1O<
1-315Aug73
CARTRIDGE, Impulse, MARK 1 MOD 3Specification no.: MIL-C-18653Drawing list no.: 276296Federal stock no.: 1377-293-8183DOD code no.: M365Qualification: BUWEPS service release*Service life: one year installed, five years totalTemperature limits: -65* to +160°FCook-off temperature: 2750FImpetus: 16,800 ft-lbWeight: 0.134 lb
IGNITER, electricSpecification no.: none (subassembly of cartridge)No-fire: 1.5 ampAll-fire: 3.0 ampRecommended firing: 10.0 ampBridge resistance: 0.11-0.18 ohmBridge mater:.l: 0.002" platinum-iridiu'Ignition material: normal lead styphnat.
BOOSTER CHARGE: black powderSpecification no.: MIL-P-223Weight: 2.20 gmGranulation: FFG
MAIN CHARGE, smokeless pyrocelluloseSpecification no.: MIL-P-231Weight: 26.4 gmGranulation: 2.0 gm cylinder, D=0.1", h=0.12"
2.4 gm cylinder, D=0.25", h=0.25"22.0 gm cylinder, D=0.312", h=0.312"
Flame temperature: 2552 0 K
APPLICATIONS: release and ejection of stores
NOTES: *baliistics aidversely affected after five days of temperatureand humidity cycling per MIL-C-21625; qualification data notavailable
11 -
1-315Aug73
CARTRIDGE, Impulse, MARK 1 MOD 3
1.5001.080
A
I----3.375 -
BOOSTER CHARGE SECONDARY MAIN CHARGEC RG MANCHARGE
IGNITIONCU
CUP
ELECTRODE CASE PLASTIC CAP
JL2<
2-1A10 15Aug73
CARTRIDGE, Impulse, MARK 2 MOD 1Specification no.: MIL-C-18653Drawing list no.: 276297Federal stock no.: 1377-293-8184DOD code no.: M190Qualification: BUWEPS service release*Service life: 1 yr. installed, 5 yr. totalTemperature limits: -650 to +160OFCook-off teh.perature: 275 0Fimpetus: 3500 ft-lbWeight: 0.073 lb
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire: 1.5 ampAll-fire: 3.0 ampRecommended firing: 10.0 amp.Bridge resistance: 0.11 - 0.18 ohmBridge material: 0.002 in. platinum-iridiumIgnition material: normal lead styphnate
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 2.2 gm.Granulation: FFG
MAIN CHARGE, smokeless pyrocelluloseSpecification no.: MIL-P-231Weight: 4.4 gm.Granulation: 2.0 gm. cylinder, D = .100, h = .120 in.
2.4 gm. cylinder, D = .250, h = .250 in.Flame temperature: 2552°K
APPLICATIONS: release and ejection of stores
NOTES: wballistics adversely affected after 5 days of temperatureand humidity cycling per MIL-D-21625. Qualification dataunavailable.
13<
2-115Aug73
CARTRIDGE, Impulse, MARK 2 MOD 1
CASE CUSMAIN CHARGE
COVER
BUSHING/
IGNITION ELEMENT BOOSTER CAP
14<
3-015Aug73
CARTRIDGE, Delay, MARK 3 MOD 0Specification no.: MIL-C-21048Drawing list no.: 299325Federal stock no.: 1377-605-5494DOD code no.: M280Qualification: BUWEPS service release*Service life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature: 525 0FImpetus: 330 ft-lbWeight: 0.155 lb
IGNITER, stab; primer, MARK 102 MOD 1Specification no.: MIL-P-18613No-fire:All-fire: 7 in.-oz.Recomnended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 0.95 sec.
MAIN CHARGE, black powderSpecification no.: MIL-P-223Weight: 1.5 gm.Granulation: FFGFlame temperature:
APPLICATIONS: AMEL lap belt
NOTES: *qualification data unavailable; delay components same as inother delay cartridges
4'
4..
3--015Aug73
CARTRIDGE, Delay, MARK 3 MOD 0
0.865 0.79
- ------ y
-. , .. .. ... 2.030 . . . "
BAFFLE DEFLECTOR DELAY BODY DELAY WASHER WASHER
"STAB PRIMER
CLOSURE DISK
PLUG
DELAY DiSK DELAY COLUMN MAIN CHARGE
I6
3-115Aug73
CARTRIDGE, Impulse, MARK 3 MOD 1Specification no.: MIL-C-21234Drawing list no.: 491832Federal stock no.: 1377-707-0589DOD code no.: M292Qualification: MIL-D-21625, Type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160*FCook-off temperature: 275 0FImpetus: 60,200 ft-lbWeight: 0.572 lb
IGNITER, percussion; primer 50M(5061W)Specification no.: Army Ord. Dwg. 7645339No-fire: 20 in-ozAll-fire: 120 in-ozRecommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 6.48 gmGranulation: A-1
MAIN CHARGE, single base, SPDN-10387Specification no.: MIL-P-309Weight: 84.5 gmGranulation: 7-perf, D = .439, d = .044, h = 1.029 in.Flame temperature: 2565"K
APPLICATIONS: Pilot ejection Navy light ejection seat (DouglasIntegrated Harness System)
NOTES: Replaces Cartridge, Ejection Seat Catapult, Mk3 Mod 0 andMk 3 Mod 1
3-115Aug73
CARTRIDGE, Impulse, MARK 3 MOD 1
5.34
2.06 1.85
TRAP
PROPELLANT
PRIMER18
4-2l5Aug7
CARTRIDGE, Delay, MARK 4 MOD 2Specification no.: AS 1072Drawing list no.: 2519703Federal stock no.: 1377-105-6659DOD code no.: M282Qualification: MIL-D-21625, Type IIIService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160°FCook-off temperature: 300OFImpetus: 79 ft-lbWeight: .025 lb
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 0.75 sec./0.95-0.61 sec.
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.092 gmGranulation: disc, D = .065, h = .007 in.Flame temperature: 3771 0 K
APPLICATIONS: Lap belt release and parachute deployment
NOTES:
14
4-215Aug73
CARTRIDGE, Delay, MARK 4 MOD 2
---1. 095- -07
v140.379 0.440
PERCUSSION PRIMER 0.75 SECOND DELAY ORIFICECOLUMN
CASE
POROUS DISK ORN
20-e
Ta
5-215Aug73
CARTRIDGE, Delay, MARK 5 MOD 2Specification no.: AS 1072Drawing list no.: 2519704Federal stock no.: 1377-105-6661DOD code no.: M284Qualification: MIL-D-21625, Type IIIService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature: 300OFImpetus: 79 ft-lbWeight: .025 lb
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-ozAll-fire: 26 in-ozRe"-ommended firing:
DELAY, pyrotechnic manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 2.00 sec./2.53-1.62 sec
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.092 gmGranulation: Disc, D = .065, h = .007 inFlame temperature: 3771°K
APPLICATIONS: lap belt release and parachute deployment
NOTES:
5-215Aug73
CARTRIDGE, Delay, MARK 5 MOD 2
j - 1.095 -J0.379
PRECUSSION POROUS DISK IGNITION MIX ORIFICEPRIMER
0-RING
CASEZ
2 SECOND DELAYCOLUMN MAIN CHARGE CLOSURE DISK
22<
r
6-215Aug73
CARTRIDGE, Delay, MARK 6 MOD 2Specification no.: AS 1072Drawing list no.: 2519705Federal stock no.: 1377-105-6660DOD code no.: M285Qualification: MIL-D-21625, type IIIService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160°FCook-off temperature: 300°FImpetus: 79 ft-lbWeight: .025 lb
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-ozAll-fire: 26 in-ozRecommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 3.00 sec./3.80-2.43 sec
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.092 gmGranulation: Disc, D = .065, h = .007 in.Flame temperature: 3771 0 K
APPLICATIONS: lap belt release and parachute deployment.
NOTES:
A3< "I
6-215Aug73
CARTRIDGE, Delay, MARK 6 MOD 2
I -1.095-I0.440 0.379
PERCUSSION PRIMER IGNITION MIX ORIFICE
CASE
CLOSURE DISK
3 SECOND DELAY
POROUS DISK COLUMN MAIN CHARGE
24<
8-015Aug73
CARTRIDGE, Impulse, MARK 8 MOD 0Specification no.: MIL-C-24017Drawing list no.: 537909Federal stock no.: 1377-075-5846DOD code no.: M185Qualification: MIL-D-21625, Type IIIService life: 1 yr. installeL 5 yr. totalTemperature limits: -650 to 4!EQ'FCook-off temperature: 250°FImpetus: 15,500 ft-lbWeight- 0.139 lb
IGNITER, electric; ignition element MARK 11 MOD 0Specification no.: MIL-I-81530No-fire: 2.0 ampAll-fire: 3.0 ampRecommended firing: 10.0 ampBridge resistance: 0.08-0.14 ohmBridge material: 0.002 in. platinum-iridiumIgnition material: 0.034 gm lead styphnateBooster material: 0.270 gm FA-878
BOOSTER CHARGE, double-base, bullseyeSpecification no.: OS 9862, Type IIWeight: 0.75 gmGranulation: Disc, D = .875, h = .055 in
MAIN CHARGE, double-base, HPC-86Specification no.: HPC-86Weight: 19.0 gmGranulation: Cylinder, D = .317, h = .250 inFlame temperature: 3221 0 K
APPLICATIONS: release and ejection of stores
NOTES:
'+' IS5 =
8-015Aug73
CARTRIDGE, Impulse, MARK 8 MOD 0
-2.883 -
1.053 1.060
I qIL
BOOSTER CASE
PLUG
CLOSURE DISK
S'BUSHING
MAIN CHARGE IGNITION ELEMENT
26<
9-015Aug73
CARTRIDGE, Impulse, MARK 9 MOD 0Specification no.: MIL-C '3931Drawing list no.t 5379(Federal stock no.: 1377-731-9264DOD code no.: M509Qualification: MIL-D-21625, Type III*Service life: 1 yr installed, 5 yr totalTemperature limits: -65* to +225*FCook-off temperature: 250°FImpetus: 6600 ft-lbWeight: 0.099 lb
IGNITER, electric; ignition element MARK 11 MOD 0Specification no.: MIL-I-81530No-fire: 2.0 ampAll-fire: 3.0 ampRecommended firing: 10.0 ampBridge resistance: 0.08-0.14 ohmBridge material: 0.002 in. platinum-iridiumIgnition material: 0.034 gm lead styphnateBooster material: 0.270 gm FA-878
MAIN CHARGE, double-base, HPC-87Specification no.: HPC-87Weight: 8.2 gmGranulation: 7-perf, D = .260, d = .016, h = .240 inFlame temperature: 3214*K
APPLICATIONS: release and ejection of stores
NOTES: *ballistics adversely affected after 21 days of temperatureand humidity cycling
27<
9-015Aug73
CARTRIDGE, Impulse, MARK 9 MOD 0
I I
1.150 , 1.080
1• 1 812 , -_
IGNITION ELEMENT
DISK
BUSHING
PLUG 0 MAIN CHARGE
ELECTRODE CASE
28-<
CLO-O
15Aug7
CARTRIDGE, Impulse, MAPK 10 MOD 0Specification no.: WS 2123Drawing list no.: 537910Federal stock no.: 1377-075-5847DCD code no.: M190Qualification: MIL-D-21625, Type IIIService life: 18 mo installed, 5 yr totalTemperature limits: -650 to +160 0 FCook-off temperature: 250OFImpetus: 2900 ft-lbWeicht: 0.085 lb
IGNITER, electric; ignition element, MARK 11 MOD 0Specification no.: MIL-I-81530No-fire: 2.0 ampAll-fire: 3.0 ampRecommended firing: 10.0 ampPridge resistance: 0.08-0.14 ohmBridge material: 0.002 in platinum-iridiumIgnition material: 0.034 gm lead styphnateBooster material: 0.270 gm FA-878
BOOSTER CHARGE, double-base, bullseyeSpecification no.: OS 9862, Type IIWeight: 0.75 gmGranulation: Disc, D=.875, h=.055 in
MAIN CHARGE, double-base, HPC-87Specification no.: HPC-87Weight: 2.8 gmGranulation: 7-perf, D=.260, d=.016, h=.240 inFlame temperature: 3214*K
APLICATIONS: release and ejection of stores
NOTES:
29<
clo--
CI 0-0
15Aug73
CARTRIDGE, Impulse, MARK 10 MOD 0
1.32
- 0.09
1.15 1.05
IGNITION ELEMENT CLOSURE DISK
INSULATOR CASE PROPELLANT
30<
10 -015Aug73
IGNITION ELEMENT, Electric, MARK 10 MOD 0Specification no.: OS 11514Drawing list no.: 546641Federal stock no.:DOD code no.:Qualification: BUWEPS release to serviceService life: 2 yr installed, 5 yr totalTemperature limits:Cook-off temperature:Impetus:Weight:No-fire: 2.0 amp.All-fire: 3.C amp.Recommended firing: 10.0 amp.-20 volt. AC/DCBridge resistance: 0.08-0.14 ohmBridge material: 0.002 in. platinum-iridiumIgnition charge: 0.034 gm. lead styphnateBooster charge: 0.220 gm. FA-878Circuit test current: 25 mamp. maximum
APPLICATIONS:
NOTES:
4-
• 31<
110-015Aug73
IGNITION ELEMENT, Electric, MARK 10 MOD 0
0.3 IGNITION CHARGE BOOSTER CHARGE0.174 0.215
ELECTRODE CUP SPACER
32<
: 11-0
15Aug7:
IGNITION ELEMENT, Electric, MARK 11 MOD 0Specification no.: OS 11521Drawing list no.: 546659 A.D. 2302122Federal stock no.:DOD code no.Qualification: BUWEPS service releaseService life:Temperature limits: MIL-STD-354Cook-off temperature:Impetus:Weight:No-fire: 2.0 amp.All-fire: 3.0 amp.Recommended firing: 10.0 amp.-20 volt. AC/DCBridge resistance: 0.08-0.14 ohmBridge material: 0.002 in. platinum-iridiumIgnition charge: 0.034 gm. lead styphnateBooster charge: 0.270 gm. FA-878Circuit test current: 25 mamp. maximum
APPLICATIONS:
NOTES:
33<
11-015Aug73
IGNITION ELEMENT, Electric, MARK II MOD 0
0.170 0.359
BOOSTER
CLOSURE DISK
ELECTRODE
IGNITION CHARGE
34<
C13-015Aug7
CARTRIDGE, Impulse, MARK 13 MOD 0Specification no.: MIL-C-22651Drawing list no.: 419701Federal stock no.: 1377-793-9927DOD code no.: M010Qualification: Mil-D-21625, Type III*Service life: 1 yr. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature: 250OFImpetus: 260 ft-lbWeight: 0.034 lb
IGNITER, electric; ignition element, MARK 11 Mod 0Specification no.: MIL-I-81530No-fire: 2.0 ampAll-fire: 3.0 amp.Recommended firing: 10.0 ampBridge resistance: 0.08-0.14 ohmBridge material: 0.002 in. platinum-iridiumIgnition material: 0.034 gm, lead styphnateBooster material: 0.270 gm, FA-878
MAIN CHARGE, double-base, HPC-95Specification no.: HPC-95Weight: 4 pieces (app. .320 gm.)Granulation: 7-perf, D=.157, d=.011, h=.170 in.Flame temperature: 3630°K
APPLICATIONS: release and ejection of light stores.
NOTES: *ballistics adversely affected after 21 days of temperatureand humidity cycling
/I
35..:
C13-015Aug73
CARTRIDGE, Impulse, MARK 13 MOD 0
1.19
TNI-- r0.80 0.53
CASE
PROPELLA NT
CLOSURE DISK
RETAINING RING
ELECTRODE
IGNITION ELEMENT
36<
113-015Aug73
IGNITION ELEMENT, Electric, MARK 13 MOD 0Specification no.: WS 4783ADrawing list no.: 613460Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits: MIL-STD-354Cook-off temperature:Impetus:Weight:No-fire: 2.0 arp.All-fire: 3.0 amp.Recommended firing: 10.0 amp.-20 volt. AC/DC
Bridge resistance: 0.08-0.14 ohmBridge material: 0.002 in platinum-iridiumIgnition charge: 0.034 gm lead styphnateBooster charge: 0.270 gm. FA-878Circuit test current: 25 mamp. maximum
APPLICATIONS:
NOTES:
113-015Aug73
IGNITION ELEMENT, Electric, MARK 13 MOD 0
0.094 0"4
BOOSTER
CUP
CLOSURE DISK
SPACER
IGNITION CHARGE
ELECTRODE
38<
C14-015Aug73
CARTRIDGE, Impulse, MARK 14 MOD 0Specification no.: MIL-C-22656Drawing list no.: 491824Federal stock no.: 1377-658-3059DOD code no.: M219Qualification: MIL-D-21625, Type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160OFCook-off temperature: 3001FImpetus: 2050 ft-lbWeight: 0.104 lb
IGNITER, percussion; primer 50 M(5061W)Specification no.: Army Ord. Dwg. 7645339No-fire: 20 in-ozAll-fire: 120 in-ozRecommended firing:
MAIN CIARGE, black powder spirohexagonal (Class 9)Specification no.: MIL-P-223,.eight: 9.3 gmGranulation: D=.6 inFlame temperature:
APPLICATIONS: canopy removal on F8U-I aircraft
NOTESý
C1 4-015Aug73
CARTRIDGE, Impulse, MARK 14 MOD 0
1.45) 1.39
1.69 -
HEAD
SEALING DISK
MAIN CHARGE
0-RING
/i
114-015Aug7
IGNITION ELEMENT, Electric, MARK 14 MOD 0Specification no.: AS 1075Drawing list no.: 2520046Federal stock no.:DOD code no.:Qualification: MIL-I-23659, Type IIIAService life: 1 yr until installed in ctg.Temperature limits:Cook-off temperature:Impetus:Weight:
IGNITERSpecification no.:No-fire: 1.2 ampAll-fire: 2.0 amp.Recommended firing: 5.0 amp.Bridge resistance:Bridge material:Bead material: .300 gm ignition compositionBooster material: .150 gm FA-878Charge: .155 gm HES 6573.3
DELAYSpecification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGESpecification no.:Weight:Granulation:
MAIN CHARGESpecification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Mk 124 & 125
NOTES:
41<
114-015Aug73
IGNITION ELEMENT, Electric, MARK 14 MOD 0
(PICTORIAL INFORMATION NOT AVAILABLE.)
42<
F
16-015Aug73
CARTRIDGE, Delay, MARK 16 MOD 0Specification no.: MIL-C-22567Drawing list no.: 482719Federal stock no.: 1377-678-5873DOD code no.: M281Qualification: MIL-D-21625Service life: 18 mo. installed, 5 yr. totalTemperature limits: -65° to +160°FCook-off temperature: 525 0FImpetus: 330 ft-lbWeight: 0.162 lb
IGNITER, stab; primer, MARK 102 MOD 1Specification no.: MIL-P-18613No-fire:All-fire:Recommended firing: 7 in-oz
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 2.0 sec.
MAIN CHARGE, black powderSpecification no.: MIL-P-223Weight: 1.5 gmGranulation: FFGFlame temperature:
APPLICATIONS: AMEL lap belt
NOTES:
43
/
16-015Aug73
CARTRIDGE, Delay, MARK 16 MOD 0
2.03
0.21--j
I [0.87 0.68
CLOSURE DISK
PROPELLANT
<TRANSFER CHARGE
'DELAY
DELAY IGNITER
PRIMER/
44--
117-015Aug73
IGNITION ELEMENT, Electric, MARK 17 MOD 0Specification no.: WS 4787Drawing list no.: 613468Federal stock no.:DOD code no.:Qualification: MIL-I-23659Service life: 2 yr. installed, 5 yr totalTemperature limits: -850 to +225°FCook-off temperature:Impetus:Weight:No-fire: 1.2 ampAll-fire: 2.0 ampRecommended firing: 4.0 ampBridge resistance: 0.9-1.1 ohm (1.1 + .1 in WS)Bridge material: 0.002 in platinum*Ignition charge:Intermediate charge: .125 gm FA-878Output charge: .082 gm. unique propellantCircuit test current: 25 mamp maximum
DELAYSpecification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGESpecification no.:Weight:Granulation:
MAIN CHARGESpecification no.:Weight:Granulation:Flame temperature:
APPLICATIONS:
NOTES: *85 to 95% platinum, balance tungsten, tantalum, molybdenum
45<
117-015Aug73
IGNITION ELEMENT, Electric, MARK 17 MOD 0
1. 141
o-0.568
0.633 0.4987
PROPELLANT
BODY
46<
C17-115Aug73
CARTRIDGE, Impulse, MARK 17 MOD 1Specification no.: MIL-C-22079, Rev. BDrawing list no.: 534559Federal stock no.: 1377-021-4213DOD code no.: M011Qualification: MIL-D-21625, Type III*Service life: 1 yr. installed, 5 yr. totalTemperature limits: -65* to +160*FCook-off temperature: 275*FImpetus: 510 ft-lbWeight: 0.102 lb
IGNITER, electric, ignition element, MARK 13 MOD 0Specification no.: MIL-I-81537No-fire: 2.0 ampAll-fire: 3.0 amp.Recommended firing: 10.0 ampBridge resistance: 0.08-0.14 ohmBridge material: 0.002 in. platinum-iridiumIgnition material: 0.034 gm. lead styphnateBooster material: 0.270 gm. FA-878
MAIN CHARGE, double-base, HPC-95Specification no.: HPC-95Weight: 8 pieces (app. .640 gm)Granulation: 7-perf, D=.157, d=.011, h=.170 inFlame temperature: 3630 0 K
APPLICATIONS: missile jettisoning and stores release
NOTES: *ballistics adversely affected after 21 days of temperatureand humidity cycling
47<
/
C17-115Aug73
CARTRIDGE, Impulse, MARK 17 MOD 1
0.875 0.533
,q .. ... ..2 .107
INSULATOR PLUG CLOSURE DISK
BODY
ELECTRODE IGNITION ELEMENT MAIN CHARGE
48<
/
S CA18-015Aug73
* CARTRIDGE, Impulse, MARK 18 MOD 0Specification no.: MIL-C-22362Drawing list no.: 491833Federal stock no.: 1377-705-9494DOD code no.: M510Qualification: MIL-D-21625, Type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -65* to +160*FCook-off temperature: 275 0 FImpetus: 69,600 ft-lbWeight: 0.384 lb
IGNITER, percussion; primer 50M(5061W)Specification no.: Army Ord. Dwg. 7645339No-fire: 20 in-ozAll-fire: 120 in-ozRecommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 6.48 gmGranulation: A-1
MAIN CHARGE, single-base, IOW7199 (M6)Specification no.: MIL-P-309Weight: 94 gmGranulation: 7-perf, D=.647, d=.064, h=1.54 in.*Flame temperature: 2727°K
APPLICATIONS: hatch opener in A3 aircraft
NOTES: *charge consists of 5 whole grains and 5 grains cut toapproximately 15/16 in
J.
____________/
CA1 8-015Aug73
CARTRIDG2E, Impulse, MARK 18 MOD 0
2.06 I1.850
5.350
SPACE
CSE'
CU
CU18-015Aug71
CUTTER, Cartridge Actuated, MARK 18 MOD 0Specification no.: WS 4382Drawing list no.: 2518207Federal stock no.: 1377-777-5670DOD code no.: M492Qualification: MIL-D-21625, Type III*Service life: 1 yr installed, 3 yr totalTemperature limits: -650 to +165 0 FCook-off temperature:Impetus:Weight:
IGNITER, primer, M42Specification no.: MIL-P-20444No-fire: 4 in ozAll-fire: 26 in ozRecommended firing:
DELAY, pyrotechnic, delay mix no. 213Specification no.: BUWEPS 2518213Nominal delay/specification limits: 4.9 to 7.00 seconds
BOOSTER CHARGE, igniter mix no. 212Specification no.: BUWEPS 2518212Weight:Granulation
MAIN CHARGE, explosive charge no. 211Specification no.: BUWEPS 2518211Weight: 65 + 5 mgGranulation:Flame temperature:
APPLICATIONS: dereefing the recovery parachute of the KDA target
NOTES: *ballistics adversely affected after 7 days of temperatureand humidity cycling
5I<
CU18-015Aug73
CUTTER, Cartridge Actuated, MARK 18 MOD 0
.319
3.260
TEFLON SLEEVE RETAINING BLADEBALL
FIRING PINSEAR
,BODY
SPLIT RING FIRING PIN CARTRIDGE
.52 <
19-015Aug73
CARTRIDGE, Impulse, MARK 19 MOD 0Specification no.: MIL-C-22653Drawing list no.: 419700Federal stock no.: 1377-793-9926DOD code no.: M012Qualification: MIL-D-21625, Type III*Service life: 1 yr installed, 5 yr totalTemperature limits: -650 to +160 0 FCook-nff temperature: 275°FImpetus: 510 ft-lbWeight: 0.038 lb
IGNITER, electric; ignition element, MARK 11 MOD 0Specification no.: MIL-I-81530No-fire: 2.0 amp
K. All-fire: 3.0 ampRecommended firing: 10.0 ampBridge resistance: 0.08-0.14 ohmBridge material: 0.002 in platinum-iridiumIgnition bead material: 0.034 gm lead styphnateBooster material: 0.270 gm FA-878
MAIN CHARGE, double-base, HPC-95Specification no.: HPC-95Weight: 8 pieces (app .640 gm)Granulation: 7-perf, D=.157, d=.011, h=.170 inFlame temperature: 3630 0 K
APPLICATIONS: release and ejection of light stores
NOTES: *ballistics adversely affected after 21 days of temperatureand humidity cycling
,j3 • "A
19-015Aug73
CARTRIDGE, Impulse, MARK 19 MOD 0
"0.805 0.536
"1.471
INSULATOR PLUu DISK
IGNITIONELEME NT BODY MAIN CHARGE
54<
22-015Aug73
IGNITION ELEMENT, Electric, MARK 22 MOD 0Specification no.: NAVWEPS WS 4376Drawing list no.: BUWEPS 2518291Federal stock no.: 1377-690-1456DOD code no.: M265Qualification: MIL-D-23659Service life: 30 mo installed, 5 yr totalTemperature limits:Cook-off temperature:Impetus:Weight; .132 lb
IGNITERSpecification no.:No-fire: 1.0 ampAll-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAYSpecification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGESpecification no.:Weight:Granulation:
M'J• CHARGESpecification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: ignites propellant grain, W-K P/N 842077 in UH-2Ahelicopter flotation gear
NOTES:
55<
22-015Aug73
IGNITION ELEMENT, Electric, MARK 22 MOD 0
1.485
1 .000(ACROSS FLATS)
SUSTAINERPELLET
BRIDGE WIRE AND
IGNITION CHARGE CLOSURE DISK
SHIELD
PINS
/ - PPROPELLANT
CASE
56<
23-015Aug73
CARTRIDGE, Impulse, MARK 23 MOD 0Specification no.: MIL-C-22244Drawing list no.: 491837Federal stock no.: 1377-632-8714DOD code no.: M161Qualification: MIL-D-21625, type III*Service life: 1 yr. installed, 5 yr. totalTemperature limits: -650 to +1600FCook-off temperature: 300OFImpetus: 110 ft-lb.Weight: .040 lb.
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire:All-fire:Recommended firing:Bridge resistance: 3.0 to 6.5 ohmBridge material: no. 35 nichrome
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.130 gm.Granulation: disc, D=.065, h=.007 in.Flame temperature: 3771 0 K
APPLICATIONS: Emergency flotation gear pod UH-2 helicopter (type IV)Rescue hoist cable cutter in HOK-l helicopter.
NOTES: *Ballistics adversely affected after J.4 days of temperatureand humidity cycling.
23-015AUG73
CARTRIDGE, Impulse, MARK 23 MOD 0
0.440 0.382
2.156-
CUMNG PUNCH
CONTACT PIN\
CUTTING EDGE
ILT-
CEMENT SEAL :7 r: '*ý\
7 O-RINGPRIMED SHELL -
MAIN CHARGE
58<
25-(15Aug7.
CARTRIDGE, Actuator, MARK 25 MOD 0Specification no.: MIL-C-22652Drawing list no.: 537886Federal stock no.: 1377-543-3552DOD code no.: M013Qualification: MIL-D-21625, type IIIService life: 30 wo. installed, 5 yr. totalTemperature limits: -650 to +160OFCook-off temperature: 275 0FImpetus: 1020 ft-lb.Weight: .019 lb.
IGNITER, percussion; primer 72MSpecification no.: Army Ord. dwg. 7645332No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 0.50 gmGranulation: A-2
MAIN CHARGE, double-base, HES 5130.36Specification no.: Hercules HES 5130.36Weight: 1.30 gmGranulation: :-perf, D=.1779, d-.0099, h=.4337 in.Flame temperature: 2491'K
APPLICATIONS: canopy unlock thruster in TT-I aircraft.
NOTES:
59<~
25-015Aug73
CARTRIDGE, Actuator, MARK 25 MOD 0
0 26--
0.808 0.689
CASE , "
PROPELLANT
SBOOSTERPRIMER
60<
I.
26-l5Aug7
CARTRIDGE, Actuator, MARK 26 MOD 0Specification no.: MIL-C-22657Drawing list no.: 537887Federal stock no.: 1377-829-8772DOD code no.: M014Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -65° to +160 0 FCook-off temperature: 275°FImpetus: 13,000 ft-lb.Weight: 0.120 lb.
IGNITER, percussion; primer 50M (5061W)Specification no.: Army Ord. dwg. 7645339No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 1.50 gmGranulation: A-1
MAIN CHARGE, double-base, HES 5130.12DSpecification no.: Hercules HES 5130.12DWeight: 18.0 gmGranulation: 1-perf, D=-.3633, d=.0919, h=8.125 in.Flame temperature: 2491 0 K
APPLICATIONS: Canopy actuator in TT-l aircraft.
NOTES:
G1<
26-015Aug73
CARTRIDGE, Actuator, MARK 26 MOD 0
0.26 -- -- 2.91
1.245 1.087
PROPELLANT
CASE //
PRIMERj BOOSTER
<O-RING
62<
S00
27-015Aug73
CARTRIDGE, Actuator, MARK 27 MOD 0Specification no.: OS 8812Drawing list no.: 419702Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IIIService life: 2 yr. installed, 5 yr. totalTemperature limits: -650 to +1600 FCook-off temperature 275°FImpetus: 1690 ft-lb.Weight: .018 lb.
IGNITER, percussion; primer 72MSpecification no.: Army Ord. dwg. 7645332No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 1.20 gm.Granulation: A-2
MAIN CHARGE, double-base, HES 4831.9BSpecification no.: Hercules HES 4831.9BWeight: 1.80 gm.Granulation: 1-perf, D=.2401, d=.0527, h=.4635Flame temperature: 3319 0 K
APPLICATIONS: Bypass unlatch actuator in P6M aircraft.
NOTES:
ro3
27-015Aug73
CARTRIDCE, Actuator, MARK 27 MOD 0
0.55
0.26- _
HEAD CASE PROPELLANT
0 4ý
BOOSTER•. ~ PRIMER/ •.
DISK O-RING
64<
''.7 &
28-115Aug7
CARTRIDGE, Actuator, MARK 28 MOD 0Specification no.: OS 9893Drawing list no.: 419703Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IIIService life: 1 yr. installed, 5 yr. totalTemperature limits: -651 to +160°FCook-off temperature: 275°FImpetus: 800 ft-lb.Weight: .012 lb.
IGNITER, percussion; primer 72MSpecification no.: Army Ord. dwg. 7645332No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 0.70 gm.Granulation: A-4
MAIN CHARGE, single-base, IMR 5010Specification no.: MIL-P-3984, type II, class 2Weight: 0.90 gm.Granulation: l-perf, D=.083, d=.021, h=.0909Flame temperature: 2892*K
APPLICATIONS: Thruster, P6M aircraft.
NOTES:
65< -
28-015Aug73
CARTRIDGE, Actuator, MARK 28 MOD 0
.-1 .50
F-o -sa. 900-"
0.4670.420
PROPELLANT
PRIMER
66RIN
29-015Aug73
CARTRIDGE, Actuator, MARK 29 MOD 0Specification no.: OS 8806Drawing list no.: 419686Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -65° to +160*FCook-off temperature: 275°FImpetus: 1260 ft-lb.Weight: 0.159 lb.
IGNITER, stab; primer, MARK 102 MOD 1Specification no.: MIL-P-18613No-fire:All-fire: 7 in-oz.Recommended firing:
MAIN CHARGE, single-base, cal. 45 propellantSpecification no.: MIL-P-3207Weight: 1.81 gm.Granulation: disc or flake of irregular shapeFlame temperature:
APPLICATIONS: Seat drogue gun in P6M aircraft.
NOTES:
67'<
29-015Aug73
CARTRIDGE, Actuator, MARK 29 MOD 0
0.865 .680
-- - 0 . |25 _
i 25 2.008
CASE CLOSURE DISK
S~WASHER
PRIMER PROPELLANT
68<
31-015Aug73
CARTRIDGE, Delay, MARK 31 MOD 0Specification no.: MIL-C-22328Drawing list no.: 419691Federal stock no.: 1377-779-0035DOD code no.: M406Qualification: MIL-D-21625, type IIIService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +1600 FCook-off temperature: 275 0FImpetus: 840 ft-lb.Weight: 0.288 lb.
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire:All-fire:Recommended firing: 5.0 amp per bridgeBridge resistance: 0.15 ohmBridge material: 0.0071 in tophet AIgnition material: priming mix. no. 815
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 1.25 sec. +.75 sec
BOOSTER CHARGE, explosive mix. no. 816Specification no.: BUWEPS dwg. 2171816Weight: 0.050 gm.
MAIN CHARGE, double-base, bullseyeSpecification no.: HPSK-BUPWeight: 1.0 gm.Granulation: disc, D=.038, h=.004 in.Flame temperature: 3780 0 K
APPLICATIONS: Refueling hose guillotine in FJ-4B aircraft.
NOTES: *Ballistics adversely affected after 7 days of temperatureand humidity cycling.
69<z
31-015Aug73
CARTRIDGE, Delay, MARK 31 MOD 0
.- 1 .632
a- t -1.32
DELAY INSERTASSEMBLY
PROPELLANT
CLOSURE
BODY & CONTACTASSEMBLY
70<
33-115Aug73
CARTRIDGE, Impulse, MARK 33 MOD 1Specification no.: MIL-C-23334Drawing list no.: 537914Federal stock no.: 1340-807-3604DOD code no.: M 755Qualification: MIL-D-21625, type IIIService life: 2 yr. installed*, 5 yr. totalTemperature limits: 00 to 160OFCook-off temperature: 275°FImpetus: 1280 ft-lb.Weight: 0.038 lb.
IGNITER, electric; ignition element, MARK 10 MOD 0Specification no.: MIL-I-23488No-fire: 2.0 amp.All-fire: 3.0 amp.Recommended firing: 10.0 amp.Bridge resistance: 0.08-0.14 ohm.Bridge material: 0.002 in. platinum-iridiumIgnition material: 0.034 gm lead styphnateBooster material: 0.270 gmn FA-878
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 1.49 gm.Granulation: disc, D=.065, h=.007Flame temperature: 3771 0 K
APPLICATIONS: To propel MK 12 projector charge for practice hedgehogweapon.
NOTES: *2 yr. after removal from hermetically sealed container.
71<
33-115Aug73
CARTRIDGE, Impulse, MARK 33 MOD 1
0 a-1 .390
0. 042-
1 0.8030.877 _ _I
PROPELLANT
CLOSURE DISK
CASE,
SPACERS
IGNITION ELEME NT
72-e
35-015Aug73
CARTRIDGE, Delay, MARK 35 MOD 0Specification no.: MIL-C-22845Drawing list no.: 419707Federal stock no.: 1377-792-9108DOD code no.: M202Qualification: MIL-D-21625, type III*Service life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160OFCook-off temperature: 275 0FImpetus: 680 ft-lb.Weight: 0.035 lb.
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, marganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 0.625 sec. +.125
BOOSTER CHARGE, double-base, bullseyeSpecification no.: OS9862, type IIWeight: 0.175 gm.Granulation: disc. D=.038, h=.004 in.
MAIN CHARGE, double-base, HES 5354.26ASpecification no.: dwg. 2230819Weight: 0.676 gm.Granulation: 7-perf, D=.185, d=.035, h=.333 in.Flame temperature: 3319 0 K
APPLICATIONS: Harness release and bladder actuator in T2 aircraft.
NOTES: *Ballistics adversely affected after 7 days of temperature andhumidity cycling.
73<
35-015Aug73
CARTRIDGE, Delay, MARK 35 MOD 0
I•---1 .109
-F--
0.895 0.745
CASE BOOSTER CLOSURE DISK
PLUG ASSEMBLY
PROPELLANT
DELAY ELEMENT
74<
36-015Aug73
CARTRIDGE, Delay, MARK 36 MOD 0Specification no.: MIL-C-23024Drawing list no.: 419708Federal stock no.: 1377-731-4496DOD code no.: M204Qualification: MIL-D-21625, type III*Service life: 18 mo. installed, 5 yrs. totalTemperature limits: -65* to +160*FCook-off temperature: 250*FImpetus: 100 ft-lb.Weight: 0.015 lb.
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 0.575 sec.
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.115 gm.Granulation: disc, D=.065, h=.007Flame temperature: 3771 0 K
APPLICATIONS: Automatic sequencing of T2 aircraft escape system.
NOTES: *Ballistics adversely affected after 7 days of temperature anchumidity cycling.
75<
36-015Aug73
CARTRIDGE, Delay, MARK 36 MOD 0
CASE IGNITER MAIN CLOSURE
0.1. 125 CHARGE DISK
PERCUSSION DELAY TRANSFERPRIMER COLUMN CHARGE
76<
I
37-015Aug73
CARTRIDGE, Impulse, MARK 37 MOD 0Specification no.: MIL-C-22848Drawing list no.: 419706Federal stock no.: 1377-731-9285DOD code no.: M019Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160°FCook-off temperature: 225OFImpetus: 2050 ft-lb.Weight: 0.030 lb.
IGNITER, percussion; primer 116M-282ASpecification no.: Army Ord. dwg 6200959No-fire: 6 in-oz.All-fire: 36 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223
7 Weight: 0.750 gm.Granulation: FG
MAIN CHARGE, double-base, HES 5354.26ASpecification no.: dwg. 2230819Weight: 2.38 gm.Granulation: 7-perf, D=.185, d=.035, h=.333 in.Flame temperature: 33190 K
APPLICATIONS: Harness and foot retainer release actuator in A5(A3J) aircraft.
NOTES:
77<
37-015Aug73
CARTRIDGE, Impulse, MARK 37 MOD 0
0.895 5
BOOSTER CHARGE CLOSURE DISK
PRIMER
-n -
CASE
,• DISK /•iAIN CHARGE
78<
/ '//
p.•
38-015Aug73
CARTRIDGE, Impulse, MARK 38 MOD 0Specification no.: MIL-C-23333Drawing list no.: 419709Federal stock no.: 1377-731-4497DOD code no.: M511Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0FCook-off temperature: 275°FImpetus: 2660 ft-lb.Weight: 0.040 lb.
IGNITER, percussion, primer 120M (257W)Specification no.: MIL-P-46610No-fire:All-fire:Recommended firing
BOOSTER CHARGE, double-base, bullseyeSpecification no.: HPSK-BUPWeight: 0.125 gmGranulation: disc, D=.038, h=.004
MAIN CHARGE, single-base, M1Specification no.: JAN-P-270Weight: 3.8 gm.Granulation: 40 mm cannon powderFlame temperature: 2417°K
APPLICATIONS: Drogue chute ejector thruster in A5 (A3J) aircraft.
NOTES:
79<
38-015Aug73
CARTRIDGE, Impulse, MARK 38 MOD 0
0.312
0.437
5.585-
BOOSTER CHARGE CLOSURE DISK
BASE
I BODY
PRIMER MAIN CHARGE
80<
39-015Aug73
CARTRIDGE, Impulse, MARK 39 MOD 0Specification no.: MIL-C-22996Drawing list no.: 537895Federal stock no.: 1377-731-4494DOD code no.: M021Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature: 275OFImpetus: 250 ft-lb.Weight: 0.025 lb.
IGNITER, percussion, primer 116M-282ASpecification no.: Army Ord. dwg. 6200959No-fire: 6 in-oz.All-fire: 36 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 0.130 gmGranulation: FFFG
MAIN CHARGE, double-base, bullseyeSpecification no.: HPSK-BUPWeight: 0.259 gm.Granulation: disc, D=.038, h=.004Flame temperature: 3780*K
APPLICATIONS: Drogue chute ejector thruster in T2 aircraft.
NOTES:
81<
39-015Aug73
CARTRIDGE, Impulse, MARK 39 MOD 0
1 .450
0.472 0J.*~ .O375
0.491 0.520
CAN
BOOSTER AND PROPELLANT
F'? I ME0
40-015Aug73
CARTRIDGE, Impulse, MARK 40 MOD 0Specification no.: MIL-C-23590Drawing list no.: 537911Federal stock no.: 1377-981-5639DOD code no.: M522Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. .otalTemperature limits: -650 to +160 0 FCook-off temperature: 275*FImpetus: 3160 ft-lb.Weight: 0.063 lb.
IGNITER, percussion; primer 50M (5061W)Specification no.: Army Ord. dwg. 7645339No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, double-base, M2Specification no.: MIL-P-323Weight: 0.05 gmGranulation:
MAIN CHARGE, double-base, HES 5251.9Specification no.: Hercules HES 5251.9Weight: 4.25 gm.Granulation: single grain; l-perf, D=.592, d=.089, h=1.5 inFlame temperature: 3037 0 K
APPLICATIONS: Arm retention cable take-up reel in A5 (A3J) aircraft.
NOTES:
83<
40-015Aug73
CARTRIDGE, Impulse, MARK 40 MOD 0
1 .670
1.060 0.804
CAP
CASE
7 BOOSTER CHARGE
PRIMER
MAIN CHARGE
84<
42-015Aug73
CARTRIDGE, Ir'oulse, MARK 42 MOD 0Specification no.: MIL-C-23672Drawing list no.: 547736Federal stock no.: 1377-731-4495DOD code no.: M512Qualification: MIL-D-21625,type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +1600FCook-off limits: 275°FImpetus: 3900 ft-lb.Weight: 0.071 lb.
IGNITER, percussion; primer 50M (5061W)Specification no.: Army Ord. dwg. 7645339No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 3.50 gm.Granulation: A-2
MAIN CHARGE, double-base, HES 5192.73Specification no.: Hercules HES 5192.73Weight: 4.5 gmGranulation: single grain; 1-perf. D=.706, d=.060, h=1.758 in.Flame temperature: 2491*K
APPLICATIONS: Knee elevator actuator in A5 (A3J) aircraft.
NOTES:
42-015Aug73
CARTRIDGE, Impulse, MARK 42 MOD 0
f= -. 750 ------- 4'I
0.937 1.078
RETAINING RING PRIMER MAIN CHARGE
O-RING
CASE
"BOOSTER
SEALING DISK FIRING PLUG
86<
4:l5Au!
CARTRIDGE, Impulse, MARK 43 MOD 0Specification no.: MIL-C-23673Drawing list no.: 547735Federal stock no.: 1377-731-9266DOD code no.: M513Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160aFCook-off temperature: 275 0FImpetus: 2840 ft-lb.Weight: 0.047 lb.
IGNITER, percussion; primer 50M (5061W)Specification no.: Army Ord. dwg. 7645339No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 1.2 gm.Granulation: A-1
MAIN CHARGE, double-base, HES 5130.44Specification no.: Hercules HES 5130.44Weight: 3.68 gm.Granulation: 6-1/2 grains; l-perf, D=.237, d=.023, h=.537Flame temperature: 2491*K
APPLICATIONS: Seat bottoming actuator in A5 (A3J) aircraft.
NOTES:
87<
43-015Aug73
CARTRIDGE, Impulse, MARK 43 MOD 0
2.03
0.880 =80
.II7
PRIMER CASE MAIN CHARGE
O-RING
CUP-IGNITER
BOOSTER
FIRING PLUG
SEALING DISK RETAINING RING
44-015Aug73
CARTRIDGE, Impulse, MARK 44 MOD 0Specification no.: MIL-C-23933Drawing list no.: 537925Federal stock no.: 1377-987-3603DOD code no.: M514Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +220OFCook-off temperature: 275°FImpetus: 120 ft-lb.Weight: 0.034 lb.
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire: 1.0 amp. per bridgeAll-fire: 2.0 amp. per bridgeRecommended firing: 5.0 amp. per bridgeBridge resistance: 0.30 ohm.Bridge material: 0.0045 in. tophet AIgnition material: primer mix no. 487
MAIN CHARGE, double-base, Hercules HiTempSpecification no.: HPSK-HTWeight: 0.125 gm.Granulation: disc, D=.053, h=.011 in.Flame temperature: 3822°K
APPLICATIONS: Self-destruct unit in KD2B-I target drone.Emergency release mechanism, type A helicopter cargohook - type IV P/N 31430B.
NOTES:
89<
44-015Aug73
CARTRIDGE, Impulse, MARK 44 MOD 0
1 -- _._ F
0.625 0-10
COLLAR O-RI NG
CASE..CLOSURE
CASE
SHIELD
JAW "'PROPELLANT
S.--IGNITION CHARGE
PINS
"CERAMIC
90<
I
45-15Aug7
CARTRIDGE, Impulse, MARK 45 MOD 0Specification no.: MIL-C-23661Drawing list no.: 537926Federal stock no.: 1377-075-5844DOD code no.: M516Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -65° to +160°FCook-off temperature: 275°FImpetus: 130 ft-lb.Weight: 0.053 lb.
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire: 2.0 amp. per bridgeAll-fire: 3.0 amp. per bridgeRecommended firing: 7.0 amp. per bridgeBridge resistance: 0.13-0.16 ohm per bridgeBridge material: 0.0071 in. tophet AIgnition material: primer mix no. 487
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.150 gm.Granulation: disc, D=.065, h=.007 in.Flame temperature: 3771 0 K
APPLICATIONS: control valve in KD2B-I target drone.
NOTES:
91<
• A..
45-015Aug73
CARTRIDGE, Impulse, MARK 45 MOD 0
0.615 0.625
S1. 150 ~
ELECTRODES MAIN CHARGE CLOSURE DISK
SHIELD
PRIMER MIX
~~92/
46-015Aug73
CARTRIDGE, Impulse, MARK 46 MOD 0Specification no.: MIL-C-23932Drawing list no.: 537885Federal stock no.: 1377-654-0875DOD code no.: M508Qualification: MIL-D-21625, type III*Service life: 6 mo. installed, 3 yr. totalTemperature limits: -650 to +160 0FCook-off temperature +275 0 FImpetus: 592,000 ft-lb.Weight: 4.350 lb.
IGNITER,electricSpecification no.: subassembly of cartridgeNo-fire: 1.0 amp. per bridgeAll-fire: 2.5 amp. per bridgeRecommended firing: 5.0 amp. per bridgeBridge rcsistance: 0.14-0.22 ohm. per bridgeBridge material: 0.002 in. platinumIgnition material: 25 gm boron potassium nitrate
BOOSTER CHARGE, single-base, IMR5010Specification no.: JAN-P-3984Weight: 65 gm.Granulation: l-perf, D=.083, d=.021, h=.0909
MAIN CHARGE, inhibited rocket grain type N-4Specification no.: MIL-P-16401Weight: 744 gmGranulation: tubular, D=3.35, d=2.95, h=14.54 in**Flame temperature: 2812 0 K
APPLICATIONS: Rearward stores ejection in A5 (A3J) aircraft.
NOTES: *Exposure to 14 days of temperature and humidity cycling andto a temperature of 225'F for 12 hours causes cartridge endseal to bulge.
**Inner surface inhibitor slotted axially.Volume = 28.763 in 2
Density = .057 lb/in3
93-,
46-015Aug73
CARTRIDGE, Impulse, MARY 46 MOD 0
0.91
1 .02 -t- -,--
"------17.74
PROPELLANT
BOOSTER
CLOSURE
CASE
IGNMTON CHARGE
94<-
47-015Aug73
CARTRIDGE, Impulse, MARK 47 MOD 0Specification no.: MIL-C-23935Drawing list no.: 534539Federal stock no.: 1377-065-4619DOD code no.: M517Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature: 275 0FImpetus: 12,500 ft-lb.Weight: 0.122 lb.
IGNITER, percussion; primer 50MSpecification no.: Army Ord. dwg. 7645339No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 2.0 gmGranulation: A-2
MAIN CHARGE, double-base, HES5130.39; inhibited double-base, HES5130.44;A2 black powder
Specification no.: HPSK5130.39, HPSK5130.44, MIL-P-223Weight: 12.8 gm. HES5130.39 (2 pieces, inhibited*)
3.9 gm. HES5130.44 (approximately 7 pieces)1.5 9m. black powder
Granulation: HES5130.39: 1 perf., D=0.534, d=0.0607 h=1,41HES5130.44: 1 perf., D=0.237, d=0.023, h=0.537
Flame temperature: 2491 0 K
APPLICATIONS: Shoulder harness take-up reel in T2 and A5 (A3J)aircraft.
NOTES: *One piece trimmed to give flat surface and total weight of12.8 gm.
95<
47-015Aug73
CARTRIDGE, Impulse, MARK 47 MOD 0
2.880
PRIMER PROPELLANT
BOOSTER
9(;<
49-0S- 15Aug73
CARTRIDGE, Impulse, MARK 49 MOD 0Specification no.: MIL-C-23934Drawing list no.: 534525Federal stock no.: 1377-083-8754DOD code no.: M518Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature: 275*FImpetus:Weight: 0.010 lb.
IGNITER, percussion; primer 116M-282ASpecification no.: Army Ord. dwg. 6200959No-fire: 6 in-oz.All-fire: 36 in-oz.Recommended firing
MAIN CHARGE, lead azide, boron, barium nitrate mixtureSpecification no.: BUWEPS dwg. 2299582Weight: 0.143 gm.Granulation: powderFlame temperature:
APPLICATIONS: Seat static line cutter in A5 (A3J) aircraft.
NOTES:
97<
49-015Aug73
CARTRIDGE, Impulse, MARK 49 MOD 0
BODY PROPELLANT CAN
0.50
PRIMER MAIN CHARGE
98<
50-015Aug 73
CARTRIDGE, Impulse, MARK 50 MOD 0Specification no.: WS 4133Drawing list no.: 534547Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IIIService life: 18 mo. installed, 5 yr. totalTemperature limits: -65* to +160*FCook-off temperature: 2?5 0FImpetus: 1750 ft-lb.Weight: 0.021 lb.
IGNITER, percussion; primer 116M-282ASpecification no.: Army Ord. dwg. 6200959No-fire: 6 in-oz.All-fire: 36 in-oz.Recommended firing
BOOSTER CHARGE, explosive mix no. 505Specification no.: BUWEPS dwg. 2406505Weight:Granulation:
MAIN CHARGE, single-base, Ml (SPDN 7807)Specification no.: JAN-P-309Weight: 2.2 gm.Granulation: 7-perf, D=.1226, d=.0135, h=.2730 inFlame temperature: 2417 0 K
APPLICATIONS: Cartridge actuated initiators, MK 9 and MK 10
NOTES:
99<
50-015Aug73
CARTRIDGE, Impui:;e, MARK 50 MOD 0
0.61
CASE
SEALING RING
PROPELLANT
X•.j/• BOOSTER
PRIMER
iOO<
iGAKE
1(0
51-115Aug73
CARTRIDGE, Impulse, MARK 51 MOD 1Specification no.: MIL-C-24016Drawing list no.: 2838297Federal stock no.: 1377-486-8619DOD code no.: M519Qualification: MIL-D-21625, type III-AService life: 1 yr. installed, 5 yr. totalTemperature limits -65* to +160 0 F*Cook-off temperature: 275*FImpetus: 1370 ft-lb.Weight: 0.089 lb.
IGNITER, electric, ignition element, MARK 11 MOD 0Specification no.: sub-assembly of cartridgeNo-fire: 2.0 amp.All-fire: 3.0 amp.Recommended firing: 10.0 amp.Bridge resistance: 0.08-0.14 ohm.Bridge material: 0.002 in platinum-iridiumIgnition material: 0.034 gm lead styphnateBooster material: 0.100 gm titanium/potassium perchlorate**
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 1.6 gm.Granulation: disc, D=.065, h=.007 in.Flame temperature: 3771 0 K
APPLICATIONS: Release and ejection of stores.
NOTES: *Marginal performance at 200OF to 225*F; ballistics adverselyaffected after 21 days of temperature and humidity cycling.
**60% titanium, 40% potassium percholorate.
j 101<
51-115Aug73
CARTRIDGE, Impulse, MARK 51 MOD 1
1.149 1.080
1.170
IGNITION CLOSUREELEMENT ASSEMBLY
BUSHING . _ MAIN
CHARGE
PLUG
CASE
102<
52-015Aug73
CARTRIDGE, Impulse, MARK 52 MOD 0Specification no.: MIL-C-81029Drawing list no.: 534532Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -65* to +160*FCook-off temperature: 275*FImpetus: 38,500 ft-lb.Weight: 0.256 lb.
IGNITER, percussion; primer 50M (5061W)Specification no.: Army Ord. dwg. 7645339No-fire: 20 in-oz.All-fire: 120 in-oz.Recon•mended firing:
BOOSTER CHARGE, U.S.F. 2K ignition granules, type ISpecification no.: U.S. Flare spec. manual 1009Weight: 2.3 gmGranulation: powder
MAIN CHARGE, double-base, HPC-86Specification no.: HPC-86Weight: 48.5 gm,Granulation: cylinder, D=.317, h=.250Flame temperature: 3221 0 K
APPLICATIONS: Primary cartridge for Martin Baker ejection seat.
NOTES: Replacement for Martin Baker primary cartridge P/N MBEU 7840.
103<
52-015Aug73
CARTRIDGE, Plapulse, MARK 52 MOD 0
2.56
1.84 1.75
CLOSURE ASSEMBLY
S•GASKET
S"• PROPELLANT
PRIMERBOOSTER
104<
53-015Aug73
CARTRIDGE, Ympulse, MARK 53 MOD 0Specification no.: MIL-C-81029Drawing list no.: 534531Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -651 to +L60 0 FCook-off temperature: 275*FImpetus: 36,200 ft-lb.Weight: 0.176 lb.
IGNITER, none, sympathetically ignited
BOOSTER CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.75 gm.Granulation: disc, D=.065, h=.007 in.
MAIN CHARGE, double-base, HPC-87Specification no.: HPC-87Weight: 44.0 gm.Granulation: 7-perf, D=.260, d=.016,. h=.240 in.Flame temperature: 3214 0 K
APPLICATIONS: Secondary cartridge for ilartin Baker ejection seat.
NOTES: Replacement for Martin Baker secondary cartridge P/N MBEU29231.
105<
53-015Aug73
CARTRIDGE, Impulse, MARK 53 MOD 0
-- 0.630-
GAS KET
BOOSTER CLOSURE
3.270 BOOSTER
PROPE LLA NT
COVER ANDCLOSURE ASSEMBLY
106<
64-015Aug73
CARTRIDGE, Impulse, MARK 64 MOD 0Specification no.: WS 4383Drawing list no.: 2518410Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IIIService life: 1 yr. installed, 5 yr. totalTemperature limits: -800 to +225 0 FCook-off temperature: 245 0FImpetus: 3800 ft-lb.Weight: 0.190 lb.
IGNITER, electric; ignition element MARK 17 MOD 0Specification no.: WS 4787No-fire: 1.0 amp.All-fire: 4.0 amp.Recommended firing: 5.0 amp.Bridge resistance: 0.9-1.1 ohmBridge material: 0.002 in platinum*Ignition material: 0.125 gm FA-878Booster material: 0.082 gm unique
BOOSTER CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.200 gmGranulation: disc, D=.065, h=.007 in
MAIN CHARGE, double-base, HPC-87Specification no.: HPC-87Weight: -4.5 gmn (14 propellant grains)Granulation: 7-perf., D=.260, d=.016, h=.240 inFlame temperature: 3214'K
APPLICATIONS: LAU-25/A aircraft flare launcher.
NOTES: *85 to 95% platinum, remainder of tungsten, tantalum,molybdenum.
107<
64-0J.5Aug73
CARTRIDGE, Impulse, MARK 64 MOD 0
-2.191
1 .5 HEX 12
O-RI NG CLOSURE DISK
°•,•,/CAPIGNITER PROPELLANT
ikt8<
66-15Aug7
CARTRIDGE, Impulse, MARK 66 MOD 0Specification no.: MIL-C-81028Drawing list no.: 534553Federal stock no.: 1377-793-9928DOD code no.: M521Qualification: MIL-D-21623, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160°FCook-off temperature: 275 0FImpetus: 1200 ft-lb.Weight: 0.079 lb.
IGNITER, percussion; primer 116M-282ASpecification no.: Army Ord. dwg. 6200959No-fire: 6 in-oz.All-fire: 36 in-oz.Recommended firing:
BOOSTER CHARGE, ignition mix, FA 878Specification no.: Army manual P-1 (10/54)Weight: 0.270 gmGranulation: powder
MAIN CHARGE, single-base, IMR5010Specification no.: MIL-P-3984, type II, class 2Weight: 1.60 gm.Granulation: l-perf, D=.083, d=.021, h=.0909Flame temperature: 2892 0 K
APPLICATIONS: Guillotine of Martin Baker ejection seat.
NOTES: Replacement for Martin Baker guillotine cartridge P/N MBEU16650.
I09<
66-015Aug73 .
CARTRIDGE, Impulse, MARK 66 MOD 0
" 1 .57- °
• ~--0.62 0.74
CASE
DISK
PROPELLANT
Er,/k• • /l / \BOOSTER
PRMEp110<
67-015Aug73
CARTRIDGE, Impulse, MARK'67 MOD 0Specification no.: WS 4388Drawing list no.: 2519598Federal stock no.: 1377-984-6280DOD code no.: M535Qualification: MIL-D-21625Service life: 30 mo. installed, 5 yr. totalTemperature limits: -65°F to +236*FCook-off temperature: 275°FImpetus: 6150 ft-lb.Weight: 0.131 lb.
IGNITER, electric; ignition element, MARK 13 MOD 0Specification no.: MIL-I-81537No-fire: 2.0 amp.All-fire: 3.0 amp.Recommended firing: 10.0 amp.Bridge reoistance: 0.08-0.14 ohm.Bridge material: 0.002 in. platinum-iridiumIgnition material: 0.034 gm. lead styphnateBooster material: 0.270 gm. FA-878
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE, single-base, IMR6962 (20mm A/C Gun MK 12)Specification no.: MIL-P-18942Weight: 8.6 gm.Granulation: l-perfFlame temperature: 2892 0 K
APPLICATIONS: Explosive bolt in LAU-17/A missile launcher.
NOTES:
111<
67-015Aug73
CARTRIDGE, Impulse, MARK 67 MOD 0
4.636
INSULATOR PLUG CASE
PROTECTIVECAP
"".PROPELLANT
ELECTRODE IGNITION ELEMENT
112<
//
73-'15Aug7:
CARTRIDGE, Impulse, MARK 73 MOD 0Specification no.: MIL-C-81331Drawing list no.: 2518226Federal stock no.: 1377-754-4784DOD code no.: M506Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -65* to +160 0 FCook-off temperature: +275*FImpetus: 49,100 ft-lb.Weight: 0.236 lb.
IGNITER, percussion; primer 50M (5061W)Specification no.: Army Ord. dwg. 7645339No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
BOOSTER CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.75 gm.Granulation: disc, D=.065, h=.007 in.
MAIN CHARGE, double-base, HPC-86Specification no.: HPC-86Weight: 60.0 gm.Granulation: cylinder, D=.317, h=.250 in.Flame temperature: 3221°K
APPLICATIONS: Canopy jettison cylinder in A-6A (A2F-I) aircraft.
NOTES:
113<
73-015Aug73
/
CARTRIDGE, Impulse, MARK 73 MOD 0
1.410-- I1.245
4.373
HEAD O-RING CASE
PRIMER BOOSTER MAIN CHARGE
114<
76-115Aug7.
CARTRIDGE, Delay, MARK 76 MOD 0Specification no.: MIL-C-81568Drawing list no.: 2518478Federal stock no.: 1377-992-9793DOD code no.: M407Qualification: MIL-D-21625, type III*Service life: 18 mo. installed, 5 yr. totalTemperature limits: -65* to +160 0 FCook-off temperature: 300*FImpetus: 500 ft-lb.Weight: .372 lb.
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 1.46 to 1.97 sec.
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.583 gmGranulation: disc, D=.065, h=.007 in.Flame temperature: 3771 0 K
APPLICATIONS: Ballistic manifold in A-5 aircraft escape system.
NOTES: *Ballistics adversely affected after 14 days of temperatureand humidity cycling, and after 8 days at +160*F.
115<
76-015Aug73
CARTRIDGE, Delay, MARK 76 MOD 0
0.490-
O-INSPROPELLANT CAN CLOSURE DISK
WAHRBODY IGNITER DELAY COLUMN
116<
82-015Aug73
CARTRIDGE, Impulse, MARK 82 MOD 0Specification no.: MIL-C-81524, WS 4378Drawing list no.: 2518360Federal stock no.: 1377-021-9526DOD code no.: M521Qualification: MIL-D-21625, type III*Service life: 18 mo. installed, 5 yr. totalTemperature limits: -65* to +1601FCook-off temperature: +275 0 FImpetus: 18,800 ft-lb.Weight: 0.184 lb.
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire: 2.0 amp. per bridgeAll-fire: 3.0 amp. per bridgeRecommended firing: 5.0 amp. per bridgeBridge resistance: 0.08-0.14 ohm per bridgeBridge material:Ignition material:Booster material:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 2.2 gm.Granulation: FFG
MAIN CHARGE, smokeless pyrocelluloseSpecification no.: MIL-P-231Weight: 26.4 gm.Granulation: 2.0 gm cylinder, D=.100, h=.120
2.4 gm cylinder, D=.250, h=.25022.0 gm cylinder, D=.312, h=.312
Flame temperature: 2552 0 K
APPLICATIONS: Escape hatch opener in A3A and A3B aircraft.
NOTES: *Ballistics adversely affected after 5 days of temperature andhumidity cycling.
82-015Aug73
CARTRIDGE, Impulse, MARK 82 MOD 0
-~~~~~~ if'_____ _-.50
3.986- -
BOOSTER CASEMANC RG
IGIINFIRST INCREMENT PLASTIC CAPELEMENT OF PROPELLANT
83-015Aug73
DETONATOR, Electric, MARK 83 MOD 0Specification no.: MIL-D-81549Drawing list no.: 537917Federal stock no.: 1377-857-0951DOD code no.: M815Qualification: MIL-D-21625, type IIIService life: 2 yr. installed, 5 yr. totalTemperature limits: -65* to +160*FCook-off temperature: +225 0 FImpetus: 240 ft-lb.Weight: .043 lb.
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire: 2.0 amp.All-fire: 4.0 amp.Recommended firing: 5.0 amp.Bridge resistance: 0.057-0.097 ohm.Bridge material: 0.002 in. platinum-iridiumIgnition material: 0.135 gm lead styphnate
BOOSTER CHARGE, dextrinated lead azideSpecification no.: MIL-L-3055Weight: 0.200 gmGranulation: consolidated
MAIN CHARGE, PETNSpecification no.: MIL-P-387, class 4Weight: 0.447 gmGranulation: consolidatedFlame temperature:
APPLICATIONS: Rupture of plastic air seal in nose cone of MK 12MOD 0 chemical spray tank.
NOTES:
119•' -
83-015Aug73
DETONATOR, Electric, MARK 83 MOD 0
1.250--0.27 9
IGNITION ASSEMBLY
BOOSTER CHARGE
S.... f •.CRIMP
MAIN CHARGE
CONNECTOR
120<
84-015Aug73
CARTRIDGE, Delay, MARK 84 MOD 0Specification no.: MIL-C-81110Drawing list no.: 534552Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type III*Service life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature: 300 0 FImpetus: 64 ft-lb.Weight: 0.025 lb.
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 2.5 sec./l.5 to 3.5 sec
(-15* to +130*F)
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.075 gm.Granulation: disc, D=.065, h=.007 in.Flame temperature: 3771'K
APPLICATIONS: Missile stage release mechanism.
NOTES: *Ballistics adversely affected after 7 days of temperatureand humidity cycling. Similar to MARK 4 MOD 2 delaycartridge.
121<
84-015Aug73
CARTRIDGE, Delay, MARK 84 MOD 0
IA0.44 0.38
XFL 0. 06"'- 1.12"--
CLOSURE DISK
PROPELLANT
DELAY IGNITER
CASE /• /
TRANSFER CHARGE
1DELAY COLUMN
PRIMER 1Z
85-015Aug71
CARTRIDGE, Impulse, MARK 85 MOD 0Specification no.: MIL-C-81027Drawing list no.: 534543Federal stock no.: 1377-960-0453DOD code no.: M507Qualification: MIL-D-21625, type IIIService life: 30 mo. installed, 5 yr. totalTemperature limits: -65* to +160*FCook-off temperature: 250*FImpetus: 2150 ft-lb.Weight: 0.086 lb.
IGNITER, percussion; primer 72MSpecification no.: Army Ord. dwg. 7645332No-fire: 20 in-oz.All-fire: 120 in-oz.Recommended firing:
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 2.5 gm.Granulation: disc, D=.065, d=.007 inFlame temperature: 3771 0 K
APPLICATIONS: Drogue gun of Martin Baker ejection seat.
NOTES: Replacement for Martin Baker drogue gun cartridge P/N MBEU7536.
123<
85-015Aug73
CARTRIDGE, Impulse, MARK 85 MOD 0
-1 .48
0.05
0.70 0.61___I
0-RING
PRIMER
124<
i
Fq i•m
86-015AUG7
CARTRIDGE, Delay, MARK 86 MOD 0Specification no.: MIL-C-21048Drawing list no.: 534545Federal stock no.: 1377-962-8626DOD code no.: M283Qualification: MIL-D-21625, Type III*Service life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +1600 FCook-off temperature: 525 0 F**Impetus: 330 ft-lbWeight: 0.155 lb
IGNITER, stab; primer, MARK 102 MOD 1Specification no.: MIL-P-18613No-fire:All-fire: 7 in-ozRecommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecif-cation no.: MIL-M-21383Nominal delay/specification limits: 0.95 sec.
MAIN CHARGE, black powderSpecification no.: MIL-P-223Weight: 1.5 gmGranulation: FFGFlame temperature:
APPLICATIONS: harness release actuator in A4(A4D) aircraft
NOTES: *ballistics adversely affected after 7 days of temperatureand humidity cycling
**from Mk3 MOD 0
125<
86-015Aug73
CARTRIDGE, Delay, MARK 86 MOD 0
0.44 0.38
v-v 0.06 -"1. 12
CLOSURE DISK
PROPELLANT
DELAY IGNITER
CASE
TRANSFER CHARGE
PRIMER
i
87-015AUG73
CARTRIDGE, Delay, MARK 87 MOD 0Specification no.: MIL-C-81330Drawing list no.: 2518218Federal stock no.DOD code no.:Qualification: MIL-D-21625, Type 1II*Service life: 18 mo. installed, 5 yr. totalTemperature limits: -15° to +130°FCook-off temperature: 250°FImpetus: 158 ft-lbWeight: 0.025 lb
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-ozAll-fire: 26 in-ozRecommended firing:
DELAY, pyrotechnic, tungsten delay compositionSpecification no.: MIL-T-23132Nominal delay/specification limits: 2.5 sec/1.5 to 3.5 sec
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUP%eight: 0.184 gmGranulation: disc, D=.065, h=.007Flame temperature: 3771°K
APPLICATIONS: terrier missile booster release assembly
NOTES: *ballistics adversely affected after 7 days of temperatureand humidity cycling and when fired under simulated altitudeconditions
1£7<
87-015Aug73
CARTRIDGE, Delay, MARK 87 MOD 0
0.44 0.38
V1 ~..0.06
1--!.12- -
CLOSURE DISKI
PROPELLANT
DELAY IGNITER
CASEv
TRANSFER CHARGE
DELAY COLUMN
97-015AUG73
CARTRIDGE, Impulse, MARK 97 MOD 0Specification no.: MIL-C-81317Drawing list no.: 2518250Federal stock no.DOD code no.:Qualification: MIL-D-21625, Type IIIService life: 30 mo installed, 5 yr totalTemperature limits: -650 to +1600 FCook-off temperature: 250*FImpetus: 1960 ft-lbWeight: 0.046 lb.
IGNITER, percussion; primer 120M-257WSpecification no.: Army Ord Dwg B-7645332 MIL-P-46610No-fire:All-fire:Recommended firing:
MAIN CHARGE, 81MM mortar powder, M9 (F=382,000)Specification no.: MIL-P-20306Weight: 2.33 gmGranulation: disc, D=.059, h=.010 inFlame temperature: 3799*K
APPLICATIONS: powers Mk 12 and Mk 17 mine chain/cable cutters
NOTES:
I2" 9<
97-015Aug73
CARTRIDGE, Impulse, MARK 97 MOD 0
1.64
Ii 0.4975Li ?
CLOSURECASE
PRIMER
130<
101-015AUG73
CARTRIDGE, Delay, MARK 101 MOD 0Specification no.: MIL-C-81567Drawing list no.: 2518477Federal stock no.: 1377-888-3466DOD code no.: M408Qualification: MIL-D-21625, Type III*Service life: 18 mo installed, 5 yr totalTemperature limits: -65* to +160°FCook-off temperature: 300*Fimpetus: 56 ft-lbWeight: .208 lb.
IGNITER, percussion; primer M42Specification no.: MIL-P-20444No-fire: 4 in-ozAll-fire: 26 in-ozRecommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: .45 to .70 sec
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: .065 gmGranulation: disc, D=.065, h=.007 inFlame temperature: 3771'K
APPLICATIONS: parachute static line cutter in A-5 aircraft escapesystem
NOTES: *ballistics adversely affected after 7 days of temperatureand humidity cyclingReport does not mention above, only that delay timesincurred after 8 days at 160°F but not beyond toleTancesset. Times OK after 28 days T&H.
131<
101-015Aug73
CARTRIDGE, Delay, MARK 101 MOD 0
Iki~YI~hJII0.490
- 1.250
POROUS DISK IGNITION MIX ORIFICE CLOSURE DISK
CASE
0I0.5 SECONDO-RING DELAY COLUMN 0-RING PROPELLANT
I J2<
32-115AUG73
PRIMER, Stab, MARK 102 MOD 1Specification no.: MIL-P-18613Drawing list no.: 275909Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature: +330OF in 1 minuteImpetus:Weight:50%-fire: 1.86 in-oz(I)
All-fire: 7 in-oz(I)Recommended firing:Charge: 0.063 gm lead styphnate (NOL-130)
APPLICATIONS:
NOTES: (1) 0.010" firing pin radius, 28' cone angle, 0.1" diameter
flat point
133<
102-115Aug73
PRIMER, Stab, MARK 102 MOD 1
0. 1601U
J0.100
134<
103-015AUG73
CARTRIDGE, Impulse, MARK 103 MOD 0Specification no.: MIL-C-21234Drawing list no.: 491830Federal stock no.: 1377-707-0592DOD code no.: M290Qualification: MIL-D-21625, Type IIIService life: 30 mo installed, 5 yr totalTemperature limits: -650 to +165 0 FCook-off temperature: 275*FImpetus: 64,300 ft-lbWeight: 0.601 lb
IGNITER, percussion, primer 50M (5061W)Specification no.: Army Ord. Dwg 7645339No-fire: 20 in-ozAll-fire: 120 in-ozRecommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 6.48 gmGranulation: A-1
MAIN CHARGE, single-base, SPDN 10387Specification no.: Jan-P-309Weight: 90.5 gmGranulation: 7-perf, D=.442, d=.044, h=l.016Flame temperature: 2565 0 K
APPLICATIONS: pilot ejection Navy heavy (425 lb man-seat) ejectionseat
NOTES: replaces cartridge, aircraft ejection seat catapult, Mk 1MOD 0 and Mk 1 MOD 2
135<
103-015Aug73
CARTRIDGE, Impulse, MARK 103 MOD 0
2.060 - 1.845
5.390
0-RING BOOSTER CS
PLUG
HEADIGNIATER TUBE
PRIMER MAIN CHARGE
136<
104-015AUG73
CARTRIDGE, Impulse, MARK 104 MOD 0Specification no.: MIL-C-21496Drawing list no.: 491831Federal stock no.: 1377-707-0590DOD code no.: M291Qualification: MIL-D-21625, Type IIIService life: 30 mo installed, 5 yr totalTemperature limits: -650 to +160 0 FCook-off temperature: 275*FImpetus: 22,100 ft-lbWeight: 0.452 lb
IGNITER, percussion, primer 50M (5061W)Specification no.: Army Ord Dwg 7645339No-fire: 20 in-ozAll-fire: 120 in-ozRecommended firing:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 6.48 gmGranulation: A-1
MAIN CHARGE, double-base, HPC-96Specification no.: HPC-96Weight: 25 gmGranulation: l-perf, D=.292, d=.081, h=.522Flame temperature: 3674*K
APPLICATIONS: ejection seat trainer
NOTES: replaces cartridge, aircraft ejection seat catapult, Mk2MOD 0 and Mk 2 MOD 1
137<
104-015Aug73
CARTRIDGE, Impulse, MARK 104 MOD 0
2.06 1.845
5.390
O-RI NG BOOSTER LINER WAD TRAP CASE
HEADN R B P MI CR
" " •"•PLUG
P'• ['" ,!1WASHER
PRIMER WASHER IGNITER TUBE SPACER MAIN CHARGE
105-015AUG73
CARTRIDGE, Impulse,MARK 105 MOD 0Specification no.: MIL-C-81536Drawing list no.: 2519597Federal stock no.: 1377-509-9427DOD code no.: M523Qualification: MIL-D-21625, Type IIIService life: 30 mo installed, 5 yr totalTemperature limits: -650 to +1600 FCook-off temperature: 275*FImpetus: 390 ft-lbWeight: .197 lb
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire: 1.0 amp.All-fire: 2.7 ampRecommended firing: 5.0 ampBridge resistance: 0.9-1.1 ohmBridge material: .0035 in Fed Spec QQ-R-175, composition EBead material:Ignition material: 0.200 gm primer mix No 487 (BUWEPS Dwg 2406487)Charge:
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: 0.450 gmGranulation: disc, D=.065, h=.007Flame temperature: 3771'K
APPLICATIONS: emergency severance guillotine for cable of AQS-10Sonar
NOTES:
139<
105-015Aug73
CARTRIDGE, Impulse, MARK 105 MOD 0
-" SEALANT IGNITER CONTACT PINS
1.00
-" 1.065
PROPELLANT BODY
140<
ExI07-515AUG73
CARTRIDGE, Impulse, Ex 107 MOD 5Specification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification: MIL-D-21625 Type IIService life:Temperature limits: -65* to +225°FCook-off temperature:Impetus: 20,300 ft-lbWeight: 0.390 lb
IGNITER, electric, ignition element MARK 17 MOD 0Specification no.: WS 4787No-fire:All-fire:Recommended firing: 5.0 ampBridge resistance:Bridge material:Bead material:Booster material:Charge:
BOOSTER CHARGE, double base, bullseyeSpecification no.: HPSK-BUPWeight: 1.1 gmGranulation: disc, D=.038, h=.004
MAIN CHARGE, double base, HPC-87Specification no.: HPC-87Weight: 24 gmGranulation: 7-perf, D=.260, d=.016, h=.240 inFlame temperature: 3214°K
APPLICATIONS: LAU-93/A Phoenix Missile Launcher, F-14A aircraftFuel Tank Jettison Release Mechanism, F-14A aircraft
NOTES:
141<
ExI07-515Aug73
CARTRIDGE, Impulse, Ex 107 MOD 5
-3.725 -t--7
So I i1. 2501 .732 o
-. 375
CASE POWDER DISK
MAIN CHARGE
142<
119-015AUG73
CARTRIDGE, Test, Turbojet Engine, MARK 119 MOD 0Specification no.: WS 4631Drawing list no.: 615248 (assy. dwg. 2113080)Federal stock no.: 1377-060-8771DOD code no.: MW03Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:
IGNITER, percussion, Remington 79M primerSpecification no.:No-fire:All-fire:Recommended firing:Booster material:Charge: 0.45 grain
BOOSTER CHARGE, none(1 )
MAIN CHARGE, none( 1 )
APPLICATIONS: testing J48 jet engine
NOTES: described in NAVORD OP 2213/NAVAIR 11-15-7, pyrotechnics,screening and marking devicestI) cartridge contains primer only; used to test engine
restart mechanism
143<
119-015Aug73
CARTRIDGE, Test, Turbojet Engine, MARK 119 MOD 0
1 .938
0.758 0.679
PRIMER
14$4<
124-015AUG73
CARTRIDGE, Impulse, MARK 124 MOD 0Specification no.: AS 1076Drawing list no.: 2838195Federal stock no.: 1377-193-8832DOD code no.: M363Qualification: MIL-D-21625, Type IIIAService life: 1 yr installed, 5 yr totalTemperature limits: -650 to +200°FCook-off temperature: 275*FImpetus: 6460 ft-lbWeight: .076 lb
IGNITER, electric, ignition element, MARK 14 MOD 0Specification no.: AS 1075No-fire: 1.0 ampAll-fire: 2.0 ampRecommended firing: 5.0 amp.Bridge resistance: 1.1 ohmBridge material: 0.002 in platinum*Ignition material: 0.300 gm ignition comp** +0.150 gm FA878Booster material: 0.155 gm HES 6573.3
MAIN CHARGE, double-base HPC-87Specification no.: HPC-87Weight: 8.0 gm***Granulation: 7-perf, D=.260, d=.016, h=.240 inFlame temperature: 3214'K
APPLICATIONS: release and ejection of stores
NOTES: *85-95% platinum, balance tungsten, tantalum, molybdenum**titanium, barium chromate, potassium perchlorate
***consumable closure =.9gm propellant
145<
124-015Aug73
CARTRIDGE, Impulse, MARK 124 MOD 0
||
II
1.056 - °,
ii'I1. 225--
CLOSURE DISKCASE
PRIMER
L_46<
125-015Aug73
CARTRIDGE, Impulse, MARK 125 MOD 0Specification no.: AS 1077Drawing list no.: 2838200Federal stock no.: 1377-193-8834DOD code no.: M364Qualification: MIL-D-21635, type III-AService life: 1 yr. installed, 5 yr. totalTemperature limits: -650 to +200 0 FCook-off temperature: 275 0 FImpetus: 3230 ft-lb.Weight: .066 lb.
IGNITER, electric, ignition element, MARK 14 MOD 0Specification no.: AS 1075No-fire: 1.0 amp.All-fire: 2.0 amp.Recommended firing: 5.0 amp.Bridge resistance: 1.1 ohm.Bridge material: 0.002 in. platinum*Igniter material: 0.300 gm igniter comp.** & 0.150 gm FA-878Booster material. 0.155 gm HES 6573.3
MAIN CHARGE, double-base, HPC-87Specification no.: HPC-87Weight: 4.0 gm.*Granulation: 7-perf, D=.260, d=.016, h=.240 in.Flame temperature: 3214*K
APPLICATIONS: Release and ejection of stores.
NOTES: *85-95% platinum, balance tungsten, tantalum, molybdenum"**Titanium, barium chromate, potassium perchlorate
***Consumable closure = .9 gm propellant
147<
125-015Aug73 .
CARTRIDGE, Impulse, MARK 125 MOD 0
1.056 - ,
1.225--
CLOSURE DISK
CASE
CHARGE
*V
PRIMER
148<
125-015Aug73
CARTRIDGE, Impulse, MARK 125 MOD 0Specification no.: AS 1077Drawing list no.: 2838200Federal stock no.: 1377-193-8834DOD code no.: M364Qualification: MIL-D-21635, type III-AService life: 1 yr. installed, 5 yr. totalTemperature limits: -650 to +200°FCook-off temperature: 275*FImpetus: 3230 ft-lb.Weight: .066 lb.
IGNITER, electric, ignition element, MARK 14 MOD 0Specification no.: AS 1075No-fire: 1.0 amp.All-fire: 2.0 amp.Recommended firing: 5.0 amp.Bridge resistance: 1.1 ohm.Bridge material: 0.002 in. platinum*Igniter matezial: 0.300 gm igniter comp.** & 0.150 gm FA-878Booster material: 0.155 gm HES 6573.3
MAIN CHARGE, double-base, HPC-87Specification no.: HPC-87Weight: 4.0 gm.*Granulation: 7-perf, D=.260, d=.016, h=.240 in.Flame temperature: 3214 0 K
APPLICATIONS: Release and e•ection of stores.
NOTES: *85-95% platinum, balance tungsten, tantalum, molybdenum"**Titanium, barium chromate, potassium perchlurate
***Consumable closure = .9 gm propellant
i49.<
125-015Aug73
CARTRIDGE, Impulse, MARK 125 MOD 0
1.056 -- -
1.22L
CLOSURE DISK
CASE
CHARGE
PRIMER
150<
127-015Aug73
CARTRIDGE, Impulse, MARK 127 MOD 0Specification no.: AS 1070Drawing list no.: 2519678Federal stock no.: 1377-103-2655DOD code no.: M548Qualification: MIL-D-21625, type III-AService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +1600 FCook-off temperature: 275'FImpetus: 340 ft-lb.Weight: .010 lb.
IGNITER, percussion; primer 116M-282ASpecification no.: Army Ord. dwg. 6200959No-fire: 6 in-oz.All-fire: 36 in-oz.Recommended firing:
MAIN CHARGE, double-base, bullseyeSpecification no.: HPSK-BUPWeight: 0.400 gmGranulation: disc. D=.038, h=.004 in.Flame temperature: 3780 0 K
APPLICATIONS: Drogue thruster in T-2 aircraft escape system.
NOTES: Replaces cartridge, impulse, MARK 39 MOD 0.
151<
127-015Aug73
CARTRIDGE, Impulse, MARK 127 MOD 0
K: 6.50
0.91------
BODY
WASHER
ol "END CLOSURE
PRIMER O-RING
1,52<
129-015Aug73
CARTRIDGE, Impulse, MARK 129 MOD 0Specification no.: AS 1068Drawing list no.: 2519638Federal stock no.:DOD code no.:Qualification: MIL-C-21625, type III-AService life: 30 mo. installed, 5 yr. totalTemperature limits: -65* tc +160*FCook-off temperature: 275*FImpetus: 760 ft-lb.Weight: 0.016 lL.
IGNITER, percussion; primer 120M-257WSpecification no.: MIL-P-46610No-fire:All-fire:Recommended firing:
MAIN CHARGE, 81mm mortar powder, M9Specification no.: MIL-P-20306Weight: .907 gm.Granulation: disc. D=.059, h=.010 in.Flame temperature: 3799 0 K
APPLICATIONS: Mine sweeping cutter MARK 16.
NOTES:
153<
129-015Aug73
CARTRIDGE, Impulse, MARK 129 MOD 0
O.939"--
0.400 0.4545
CASE O-RI NG
PRI•MER MAIN CHARGE
Isq
131-015Aug73
CARTRIDGE, Impulse, MARK 131 MOD 0Specification no.: AS 1073Drawing list no.: 2518352Federal stock no.: 1377-999-7462DOD code nc.: M197Qualification: MIL-D-21625, type III-AService life: 1 yr. installed, 5 yr. totalTemperature limits:Cook-off temperature: 325*FImpetus: 53 ft-lb.Weight: .020 lb.
IGNITER, electricSpecification no.: subassembly of cartridgeNo-fire:All-fire:Recommended firing: 5.0 amp.Bridge resistance: 0.30-0.50 ohm.Bridge material: .0056 in. composition E (F.S. QQ-R-175)Ignition material: lead styphnate
MAIN CHARGE, black powderSpecification no.: MIL-P-223Weight: .240 gmGranulation: class 6Flame temperature:
APPLICATIONS: AN/ALE-29 & 29A chaff dispenser pod.
NOTES:
131-015Aug73
CARTPIDGE, Impulse, MARK 131 MOD 0
~ 0.625MAIN CHARGE
~ 0:728CLOSURE DISK
ELECTRODE
156<Y
136-015Aug73
CARTRIDGE, Delay, MARK 136 MOD 0Specification no.: AS 1646Drawing list no.: 2519923Federal stock no.: 1377-017-0682DOD code no.: M770Qualification: MIL-D-21625, type III-AService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature: 450OFImpetus:Weight: .020 lb.
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits:
MAIN CHARGE, lead azide/boron/barium nitrate*Specification no.: dwg. 229958,2Weight: .142 gmGranulation: powder (no. 35 sieve)Flame temperature:
APPLICATIONS: , Parachute static line cutter in OV-10A aircraft.
NOTES: *Lead azide 27.2% no. 35 sieveBoron, amorphous 8.8%Barium nitrate 64.0%
157<
136-015Aug73
CARTRIDGE, Delay, MARK 136 MOD 0
- •1 .26
GASLESS PROPELLANT CLOSURE DISK
IGNITION POWDER
PRIMER HOUSING-~ A
O-RING »~
\"INSERT ASSEMBLY
/AlPRIMER AND
RETAINER ASSEMBLY DELAY COLUMN O-RING
158<
137-015Aug73
CARTRIDGE, Delay, MARK 137 MOD 0Specification no.: AS 1079Drawing list no.: 2838225Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type III-AService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +200°FCook-off temperature: 325'FImpetus:Weight:
IGNITER, percussion, primer M42 - (5086)Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:Bridge resistance:Bridge material:Bead material:Igniter material: 0.0155 gm lead styphnate
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 1.3 sec/l.05 to 1.65
(-650 to +200 0 F)
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Parachute timer, T-28 aircraft.
NOTES: Master specialities model 1000-E.
[59<
137-015Aug73
CARTRIDGE, Delay, MARK 137 MOD 0
(PICTORIAL INFORMATION NOT AVAILABLE.)
160<
141-015Aug73
CARTRIDGE, Delay, MARK 141 MOD GSpecification no.: AS 1082Drawing list no.: 2519935Federal stock no.: 1377-997-0877DOD code no.: M771Qualification: MIL-D-21625, type III-AService life: 18 mo. installed, 5 yr. totalTemperature limits: -65' to +160 0 FCook-off temperature: 3001FImpetus: 340 ft-lb.Weight: .025 lb.
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 2.0 sec/2.6 sec max
MAIN CHARGE, double-base, uniqueSpecification no.: HPSK-BUPWeight: .40 gmGranulation: disc, D=.065, h=.007 in.Flame temperature: 3771 0 K
APPLICATIONS: Personnel chute thruster (high speed) in OV/10A air-craft.
NOTES:
161<
141-015Aug73
CARTRIDGE, Delay, MARK 141 MOD 0
0.540 I I, '
- . 495
GASLESS PROPELLANT CLOSURE DISKIGNITION POWDER
PRIMER HOUSING
0-RING
INSERT ASSEMBLY
PRIMER ANDRETAINER ASSEMBLY DELAY COLUMN O-RING
162<
142-015Aug73
CARTRIDGE, Delay, MARK 142 MOD 0Specification no.: AS 1083Drawing list no.: 2519943Federal stock no.: 1377-997-0876DOD code no.: M772Qualification: MIL-D-21625, type III-AService life: 18 mo. installed, 5 yr. totalTemperature limits: -65° to +165°FCook-off temperature: 300OFImpetus: 1330 ft-lb.Weight: .039 lb.
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 0.125 sec/0.25 sec max after
28 days T&H
BOOSTER CHARGE, gasless ignition powder, A-lASpecification no.: MIL-P-22264Weight: .200 gmGranulation: powder
MAIN CHARGE, double-base, Hercules 2400Specification no.: Hercules 2400Weight: 1.60 gmGranulation: disc, D=.038, h=.0125Flame temperature: 3284'K
APPLICATIONS: Personnel chute thruster (low speed) in OV-10A aircraft.
NOTES:
163<
142-015Aug73
CARTRIDGE, Delay, MARK 142 MOD 0
1 .385
0.543
CLOSURE DISKGASLESS i'
IGNITION POWDER
PRIMER ANDRETAINER ASSEMBLY
PROPELLANT
INSERT ASSEMBLYI • D-RI NGS
•--- DELAY
COMPOSITION
164<
243-215Aug73
CARTRIDGE, Igniter, Turbo-Jet Engine, MK 243 MOD 2Specification no.:Drawing list no.: 282766Federal stock no.: 1377-674-4323DOD code no.: M374Qualification:Service life: 60 hours flight time, 1 year opened, 6 years totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER, percussion, primer no. 68Specification no.:No-fire:All-fire:Recommended firing:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: J48 jet engine igniter.
NOTES: Described in NAVWEPS OP 2213, Pyrotechnics, Screening andDye Marking Devices (First Revision).
165<
24 3-215Aug73
CARTRIDGE, Igniter, Turbo-jet Engine, MK 243 MOD 2
-2.563-
0.758 I J0.679
PE2:CUSSION PRIMER
CCU-4/A15Aug73
CARTRIDGE: Delay, CCU-4/ASpecification no.: AS 1084Drawing list no.: 234AS100Federal stock no.:DOD code no.:Qualification: MIL-D-21625 Type III AService life: 18 mo. installed, 5 yrs totalTemperature limits: -650 to +200°FCook-off temperature: 325*FImpetus: 96 ft-lbWeight: .020 lb.
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:
DELAY, pyrotechnic, manganese delay compositionSpecification no.: MIL-M-21383Nominal delay/specification limits: 1.0 sec/0.75 to 1.25 sec(-65* to
2000F)
MAIN CHARGE, double-base, hi-tempSpecification no.: HPSK-HTWeight: .100gmGranulation: disc, D = .053, h = .011Flame temperature: 3822°K
APPLICATIONS: parachute timer, BDU-36C, practice bomb, T-28 aircraft
NOTES:
167'
CCU- 4/A15Aug73
CARTRIDGE, Delay, CCU-4/A
-1147 -
0.35 T1ý - 0.377
- -0. 05 2-
CASE COUEDS
P -'DC-USSICN PRIMER DELAY COLUMN
MXTJ-4A15Aug73
CARTRIDGE, Engine Starter, MXU-4ASpecification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:
IGNITERSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge,
DELAYSpecification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGESpecification no.:Weight:Granulation:
MAIN CHARGESpecification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: °
NOTES: Described in NAVAIR ADI00
169<
MXU-4A15Aug73
CARTRIDGE, Engine Starter, MXU-4A
(PICTORIAL INFORMATION NOT AVAILABLE.)
j70<
MXU-4A/A15Aug73
CARTRIDGE, Engine Starter, MXU-4A/ASpecification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:
IGNITERSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAYSpecification no.:Nominal delay/specification limits:Delay material:
BOOSTE'ý CHARGESpecification no.:Weight:Granulation:
"MAIN CHARGESpecification no.:Weight:Granulation:Flame temperature:
APPLICATIONS:
NOTES:
171<
MXU- 4A/A15Aug73
CARTRIDGE, Engine Starter, MXU-4A/A
(PICTORIAL INFORMATION NOT AVAILABLE.)
172<
240637715Aug73
CARTRIDGE, Impulse, (NAVAIR dwg 2406377)Specification no.: 0S11701S.C.D.: 2406377Federal stock no.: 1377-857-0952 (MK 1 MOD 0 explosive bolt)DOD code no.: M341 (MK 1 MOD 0 explosive bolt)Qualification: Lype IIIService life: 12 months installed, 5 years totalTemperature limits: -650 to +165 0 FCook-off temperature:Impetus: 160 ft-lbWeight:
IGNITER, electricSpecification no.:No-fire: 2.0 amp. per bridgeAll-fire: 4.0 amp. per bridgeRecommended firing: 5.0 amp. per bridgeBridge resistance: 0.09 - 0.16 ohm per bridgeBridge material: tophet cIgnition material: 0.045 gm. lead styphnate
BOOSTER CHARGE, lead azideSpecification no.:Weight: 0.175 gm.Granulation: consolidated
MAIN CHARGE, pettnSpecification no.: MIL-P-3870, class 4Weight: 0.274 gm.Granulation: consolidatedFlame temperature:
APPLICATIONS: subassembly of Mark 1 Mod 0 explosive bolt used inMark 12 Mod 0 aircraft chemical spray tank.
NOTES:
7 73
240637715Aug73
CARTRIDGE, Impulse, (NAVAIR dwg 2406377)
--- 0.625
ii'> 0I , '
"- 1.875 -
INSULATION BRIDGEWIRES BASE CHARGE
SPACER
PIN FLASH CHARGE IGNITION CHARGE
174<
/•
251814115Aug73
SQUIB, Electric, (NAVAIR dwg. 2518141)Specification no.:Drawing list no.: 2518141Federal stock no.:DOD code no.: M829Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -650 to +120°FCook-off temperature:ImpetusWeight:
IGNITER,Specification no.:No-fire:All-fire:Pecommended firing: 2.0 amp at 20 voltsBridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits: 7.0 secondsDelay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: drone version of F-9F fire indicator pods.
NOTES:
175<
2518141l5Aug73
SQUIB, Electric, (NAVAIR dwg. 2518141)
0.283 2.
CRIMP LEG WIRES
,SHUNT
SHELL
I-6
251835815Aug73
SQUIB, Electric, (NAVAIR dwg. 2518358)Specification no.:Drawing list no. : 2518358Federal stock no.:DOD code no.: M836Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -650 to +120 0 FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing: 2.0 amp.Bridge rcsistance: 0.6 - 1.2 ohmBridge material:Bead material:Booster material:Charge:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: used in explosive bolt attaching tail cone to the bodyof a target drone.
NOTES:
177<
251835815Aug73
(SQUIB, Electric, (NAVAIR dwg. 2518358)
0.285 - 0.520
SHELL CRIMP
Iý SHUNT
178<
251835915Aug73
SQUIB, flectric, (NAVAIR dwg. 2518359)Specification no.:Drawing list no.: 2518359Federal stock no.:DOD code no.: M855Qualification:Service life: 30 months installed, 5 years total
"*Temperature limits: -651 to +120*FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing: 1.5 amp. (max. 5 amp.)Bridge resistance: 0.6 - 1.2 hmBridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits: 0.5 secondDelay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: installed in recovery parachute disconnect mechanism ofa target drone.
NOTES:
179<
251835915Aug73
SQUIB, Electric, (NAVAIR dwg. 2518359)
0.283 "-0.830--
SHELLLEWIS
•CRIMP
f SHUNT
251837315Aug73
CARTRIDGE, Cable Cutter, (NAVAIR dwg. 2518373)Source: Mine Safety Appliance Co. P/N 96747Source control dwg.: 2518373Federal stock no.: 1377-220-2361DOD code no.: M018Qualification: MIL-D-21625, type IIService life: 18 mo. installed, 5 yr. totalTemperature limits: -651 to +160*FCook-off temperature: 225*FImpetus:Weight: .040 lb.
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing: 5.0 amp.Bridge resistance:Bridge material:Bead material:Bcoster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE, double-baseSpecification no.:Weight: .291 gmCranulation:Flame temperatute:
APPLICATIONS: Turtl-e II hoist cable cutter, RH-3A Helicopter.
NOTES:
£S1<
251837315Aug73
CARTRIDGE, Cable Cutter(NAVAIR dwg. 2518373)
0.435 0.384
S1 .480
CASE
CONTACT PINWIRE SOLDERED TO CASE
_.___- CEMENT SEAL
MAIN CHARGE-
CUTTING EDGE O-RING
251842615Aug73
CARTRIDGE, Impulse(NAVAIR dwg. 2518426)Source: Mine Safety Appliance Co.P/N TA-96713Source control dwg.: 2518426Federal stock no.: 1377-999-7463DOD code no.: M]62Qualification:Service life: 1 yr. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperature:Impetus:Weight: .040 lb.
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing: 8.0 amp.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:
- Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Rescue hoist cable cutter in CH-46A Helicopter.
NOTES:
I83<
//
251842615Aug73
CARTRIDGE, Impulse(NAVAIR dwg. 2518626)
0.500 0.374
"" 2.109
CONTACT PIN O-RING CAPTIVE CUTTING PUNCH
CEMENT SEAL ,
/
MAIN CHARGE CUTTING EDGE
184<
2518431
15Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 2518431)Source: Talley Industries P/N 1013-40Source control dwg.: 2518431Federal stock no.: 1377-630-9597"DOD code no.: MI05Qualification: MIL-D-21625 type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -65° to +160*FCook-off temperature:Impetus:Weight: .088 lb.
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing: 10.0 amp.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:
-- '. Granulation:Flame temperature:
APPLICATIONS: Hoist cable cutter, P/N 1041-1, in SH-3A, CH-19E, UH-19F,UH-34D and UH-34E Helicopters.
2
NOTES:
j <
251843115Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 2518431)
1.656-
IGNITION ELEMENT
SPACER
INSAR
?C'NDER CHARGE'
CUP CONTACT PINS
186<
251849315Aug73
GRAIN, Propellant (NAVAIR dwg. 2518493)Source: Walter Kidde P/N 842077Source control dwg.: 2518493Federal stock no.: 1377-910-6097DOD code no.: M811Qualification: limited procurementService life: 30 mo. installed, 5 yr. totalTemperature limits:Cook-off temperature:Impetus:Weight: .950 lb.
IGNITER, electric, ignition element, MARK 22 MOD 0Specification no.: WS4376No-fire: 1.0 amp.All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:
7 Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Walter Kidde gas generator in UH-2A Helicopter.
NOTES:
187<
---
251849315Aug73
GRAIN, Propellant (NAVAIR dwg. 2518493)
2.020 2.50
- 4.370
,4,j
l-I
25185015Aug7
CARTRIDGE, Delay (NAVAIR dwg. 2518508)Source: Holex, Inc. P/N 1875Source control dwg.: 2518508Federal stock no.:DOD code no.:Qualification:Service life: 30 mo. installed, 5 yr. totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER, percussion, primer 120MSpecification no.: MIL-P-46610No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification lirits: 3.0 sec/Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Thruster T'-39D aircraft escape system.
NOTES:
"" " ." .• • ;r;(8"
251850815Aug73
CARTRIDGE, Delay (NAVAIR dwg. 2518508)
(PICTORIAL INFORMATION NOT AVAILABLE.)
//
251850915Aug,3
CARTRIDGE, Aircraft Fire Extinguisher (NAVAIR dwg. 2518509)Source: *Drawing list no.: 2518509Federal stock no.: 1377-021-9525DOD code no.: M178Qualification: MIL-D-21625 type III-BService life: 18 mo. installed, 5 yr. totalTemperature limits:Cook-off temperature:Impetus:Weight: .025 lb
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing: 3.0 amp.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: release fire extinguishing agent around aircraft engine.
NOTES: *APCO P/N 800545Holex Inc. P/N 4199McCormick-Selph P/N 8088A4M45 or M008
I191J<
251850915Aug73
CARTRIDGE, Aircraft Fire Extinguisher (NAVAIR dwg. 2518509)
0.50 BODY PIN
ACROSS FLATS--[*%-
CLOSURE PROPELLANT TERMI NALDISK
19•<
251851915Aug73
CARTRIDGE, Aircraft Fire Extinguisher(NAVAIR dwg. 2518519)Source: Walter Kidde Co. P/N 895188Source control dwg.: 2518519Federal stock no.: 1377-756-1384DOD code no.: M182Qualification: MIL-D-21625 type III-BService life: 18 mo. installed, 5 yr. totalTemperature limits: *Cook-off temperature:Impetus:Weight: .169 lb.
IGNITER, electric, DuPont E-92 Squib (two)Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Walter Kidde fire extinguisher systems ' 9 aiZclft.
NOTES: *Replace aftcr 20u0 hrs. in environment of +1000 to +160 0 F.
193<
251851915Aug73
CARTRIDGE, Aircraft Fire Extinguisher, (NAVAIR dwg. 2518519)
1.3 ---8
1.030
,TMAIN CHARGE
CENTER TWO SQUIBSCONTACT
TOQI
SQUIB LEADWIRES
"-"-SLUG
194<
/
251952415Aug73
SQUIB, Electric, (NAVAIR dwg. 2519524)Specification no.:Drawing list no.: 2519524Federal 3tock no.:DOD code no.: M862Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -650 to +1200FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing: 1.0 amp.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER-CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: used in explosive bolts attaching tail cone of atarget drone.
NOTES:
195<
251952415Aug73
SQUIB, Electric, (NAVAIR dwg. 2519524)
0.233
[ý 0.656ý
IGNITION BEAD-~ WIRE LEADS
SHELL
MAIN CHARG
V
251952715Au973
CARTRIDGE-VIAL, Life Raft (NAVAIR dwg. 2519527)Source: Walter Kidde Co. P/N 928425Source control dwg.: 2519527Federal stock no.: 1377-038-4954DOD code no.: M175Qualification: MIL-D-21625 type IIService life: 30 mo. installed, 5 yr. totalTemperature limits:Cook-off temperature:Impetus:Weight: .009 lb.
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing: 8.0 amp.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Vial Life Raft Bottle Assembly 80023.
NOTES:
197<
251952715hug73
CARTRIDGE-VIAL, Life Raft (NAVAIR dwg. 2519527)
0.525
• 0.908 q-
CENTER CONTACT GASKET RETAINER CAP
MAIN CHARGE
IGNITION BASEASSEMBLY
INSULATOR DISK BRIDGE WIRE
WIRE LEADS
251959015Au973
CARTRIDGE, Aircraft Fire Extinguisher (NAVAIR 2519590)SourceO Walter Kidde Co. P/N 895189Source control dwg.: 2519590Federal stock no.: 1377-446-7238DOD code no.: M179Qualification: MIL-D-21625 type III-BService life: 18 mo. installed, 5 yr. totalTemperature limits: *Cook-off temperature:
.4Impetus:Weight: .135 lb.
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification iso.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: release fire extinguishing agent around aircraft engine.
NOTES: *Replace after 2000 hours in environment of +100* to +160*F.
199<
251959015Auq73
CARTRIDGE, Aircraft Fire Extinguisher (MJAVAIR dwq. 2519590
2.65 4
CASIG SUIBSTWOSLUG
INSULATOR SQUIB LEAD WIRES FILLER
%00<
CAPTPIDGr, Impulse (NAVAIP dwq. 2519601)soutce: rlare-4orthirn P/N 2000)4Source control dwg.: 2519608I Ted-ral stock no. : 1)77-964-1604DOD code no.' M.•70Qualificationt NIL-D-21625 type 1I1-9Service life: 30 mo. installed, 5 yr. totalTemperature limits: -6'j to *160"1Cook-off temperature: 275orI mpvt u~Weight: .067 lb.
IGNITER, percussionSpecifcation no.:No-fire:All-fire:Recommended firing:Bridqe resistance:Bridge material:Bead material:Booster material:Charge':
DELAY,Specification no.:Nominal delay/sp-cification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulat ion:
MAIN CHARGE,Specification no.:Weac I q' t :Granulation:Flame tcmperature:
APPLICATICNS: personnel restraint harness take-up reel in A4 andTA-4 aircraft.
NOTES:
ZOl<
15Au97 3
CAPTRTDGE, IMPUIor~ (NAVAIII dw'j. 25i19tU8)
____________________ 0.810
K'- 2.433
PRIMERCLOSURE DISK
NAI~#MAIN CHARGE
BOOTE
251961415Aug73
CARTRIDGE, Aircraft Fire Extinguisher (NAVAIR dwg 2519614)Source: Lmerican Standard P/N 13083-5Source control dwg.: 2519614Federal stock no.: 1377-930-9390DOD code no.: M193Qualification: MIL-D-21625 type III-B*Service life: 12 mo. installed, 5 yr. totalTemperature limits:Cook-off temperature: +500*FImpetus:Weight: .060 lb.
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Release fire extinguisher agent around aircraft engine.
NOTES: *Prolonged exposure to high temperature and vibration may haveadverse affects upon bridge wire resistance; temperature-humidity cycling may affect output.
203<
251961415Aug73
CARTRIDGE, Aircraft Fire Extinguisher, (NAVAIR dwg. 2519614)
0.906
2.5
INSULATOR GROUND STUD
TERMINAL STUD 0-RING
THREADS MATE WITH/ DESTRUCTIBLE HOUSING
SQUIB LEAD WIRES
MAIN CHARGE SQUIB
%04<
251963:15Aug7:
SQUIB, Electric (NAVAIR dwg. 2519631)Source: Beckman & Whitley P/N BW 10057Source control dwg.: 2519631Federal stock no.: 1377-010-8703DOD code no.: M905Qualification: MIL-D-21625 type III-BService life: 2 yr. installed, 5 yr. totalTemperature limits: -650 to +160OFCook-off temperature:Impetus:Weight:No-fire: 1.0 amp.All-fire: 1.8 amp. (6 times)Recommended firing: 3.0 amp.Bridge resistance: 0.18 +.04 ohmBridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Guillotine (B/W P/N 100996) of rescue hoist cableUH-lE helicopter.
NOTES:
S. .. . . . . %. . . . . .
251963115Aug73
SQUIB, Electric, (NAVAIR dwg. 2519631)
0.238
K-4-,o.438
206<
251967615Aug73
CARTRIDGE, Gas Generation (NAVAIR dwg. 2519676)Source: Walter Kidde, Co. P/N 874891Source control dwg.: 251.9676Federal stock no.: 1377-411-0476DOD code no.: M569Qualification: MIL-D-21625 type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -65o to +160*FCook-off temperature:Impetus:Weight: 3.77 lb.
IGNITER, percussionSpecification no.:No-fire:All-fire:Recommended firing: 10 to 18 lb. acting over 1.75 in. max.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHAPGE,Specification no.:Weight!Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: cool gas generator W/K P/N 89 3209 for inflating 25-manlife raft (LR-25) in C-2A aircraft.
NOTES:
207<
251967615Aug73
CARTRIDGE, Gas Generation (NAVAIR dwg. 2519676)
2.125 2.500
15.910
M C
O-RI NG ,.'
, MAIN CHARGE
PRIMER
2519696-115Aug73
CARTRIDGE, Reduced Charge Primary (NAVAIR dwg. 2519696-1)Source: Martin Baker Aircraft Ltd. P/N MBEU 26434Source control dwg.: 2519696-1Federal stock no.: 1377-845-5242*DOD code no.: M397Qualification: MIL-D-21625 type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +165 0 FCook-off temperature: 275 0 FImpetus:Weight: .50 lb.
IGNITER, percussionSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE, single baseSpecification no.:Weight: 33.7 gmGranulation:Flame temperature:
APPLICATIONS: Martin Baker Personnel Escape System.
NOTES: *Issued as part of Martin Baker Cartridge Set, Seat Ejection,Reduced Charge Primary.
O9<
2519696-115Aug73
CARTRIDGE, Reduced Charge Primary (NAVAIR dwg. 2519696-1)
1. 748 1.843
S2.574
COPPER CLOSURE DISK
BRASS WASHERN lCASE
BOOSTER
RUBBER GASKET
MAIN CHARGE PERCUSSION CAP
210<
2519696-215Aug73
CARTRIDGE, SecondAry Catapult(NAVAIR dwg. 2519696-2)Source: Martin Baker Aircraft Ltd. P/N MBEU 29231Source control dwg.: 2519696-2Federal stock no.: 1377-883-8994 or 1377-845-5242"DOD code no.: M399 or M397*Qualification: MIL-D-21625 type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +1600FCook-off temperature: 275 0 FImpetus:Weight: .319 lb.
IGNITER, sympathetic ignitionSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS! Martin Baker Personnel Escape System.
NOTES: *Issued as part of Martin Baker Cartridge Set, Standard Primaryand Martin Baker Cartridge Seat, Reduced Charge Primary.
2519696-215Aug73
CARTRIDGE, Secondary Catapult (NAVAIR dwg. 2519696-2)
RUBBER SEALING RING CASE
3.270
MAIN CHARGE
0.610
COPPER DISKCOE
212e-
251969715Aug73
CARTRIDGE, Primary ratapult (NAVAIR dwq. 2519697)Source: Marti:i Baker Aircraft Ltd. P/N MBEU 7840Source control dwg.: 2519697Federal stock no.: 1377-883-8994*DOD code no.: M399*Qualification: MIL-D-21625 type III-BServica life: 30 mo,. installed, 5 yr. totalTemperature limits: -65* to +160*FCook-off temperature: 300*FImpetus:Weight: .507 lb.
IGNITER, percussionSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOUSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight: 40.82 gmGranulation:Flame temperature:
APPLICATIONS: Martin Baker Personnel Escape System.
NOTES: *Issued as part of Martin Baker Cartridge Set, Seat Ejection,
Standard Primary.
251969715Aug73
CARTRIDGE, Primary Catapult (NAVAIR dwg. 251.9697)
1.7481.843
2.574 - -
BRASS WASHER CLOSURE DISK CASE BOOSTER
RUBBER GASKET
MAIN HARGEPRECUSSION CAP
214-e
2519698
CARTRIDGE, Impulse(NAVAIR dwq. 2519690)Source: Martin Baker Aircraft Ltd. P/N MEU 16650Source control dwq.: 2519698Federal stock no.t 1377-113-8998DOD code no.s M520Qualification: MIL-D-21625 type I11-9Service life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to 1600FCook-off temperature: 2759FImpetus:Weight: .079 lb.
IGNITER,Specification no.:No-fire:All-fire:Recommended firinqgBridge resistance:Bridge material:Bead material:Booster material:Charge:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Martin Baker Personnel Escape System.
NOTES:
5Au9,73
CAITPID(;r, Impulse (NAVAIR dwq. 2519698)
- 1L1.600
NI TROCELLULOSE
PAPER DISK
CARTRIDGE CAP CASE *OPERCUSIN CAPASSEMBLY PRU'
GON POWDER
ZIAi;<
251970715Aug73
CARTRIDGE, Aircraft Fire Extinguisher (NAVAIR dwg. 2519707)Source: Walter Kidde Co. P/N 894846Source control dwg.: 2519707Federal stock no.: 1377-824-5858DOD code no.: M232Qualification: MIL-D-21625 type III-BService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 F*Cook-off temperature: 375*FImpetus:Weight: .169 lb.
IGNITER, electric, Dupont E-92EB squib (two)Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance: .025 - .100 ohm.Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: engine fire extinguishing system, UH-2C and CH-53Ahelicopters.
NOTES: *Replace after 2000 hours in environments of +1000 to +160°F.
217< ..
251970715Aug73
CARTRIDGE, Aircraft Fire Extinguisher (NAVAIR dwg. 2519707)
251995315Aug73
CARTRIDGE, Impu. e (NAVAIR dwg. 2519953)Source: Mine L ety Appliance Co. P/N SK-15330-9Source control dwg.: 2519953Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type III-BService life: 12 mo. installed, 5 yr. totalTemperature limits: -65° to +160OFCook-off temperature:Impetus:Weight: .090 lb.
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing: 10.0 amp.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Velocity Power Cutter P/N A375-2.
NOTES:
251995315Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 2519953)
0.512 0.467
2.656 . . .
251995415Aug73
CARTRIDGE, Impulse (NAVIR dwg. 2519954)Source: Mine Safety Appliance Co. P/N SK-15331-9Source control dwg.: 2519954Federal stock no.:DOD code no.:Qualification: MIL-D-21625 type III-BService life: 12 mo. installed, 5 yr. totalTemperature limits: -65* to +160*FCook-cff temperature:Impetus:Weight: .060 lb,
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firing: 10.0 amp.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Cable Cutter, MSA P/N 15380-1 in CH-53 helicopter.
NOTES:
251995415Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 2519954)
0.688 0.628
- 1.594
.f.
252000215Aug73
CARTRIDGE, Impulse Drogue (NAVAIR dwg. 252C002)Source: Martin Baker Aircraft Ltd. P/N MBEU 7536Source control dwg.: 2520002Federal stock no.: 1377-883-8997DOD code no.: M507Qualification: MIL-D-21625 type III-BService life: 30 mo. installed, 5 yr totalTemperature limits: -65° to +160*FCook-off temperature: 450°FImpetus:Weight: .086 rb.
IGNITER, percussionSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
t.PPLICATIONS: Martin Baker Personnel Escape System.
NOTES:
252 000215Aug73
CARTRIDGE, Impulse Drogue (NAVAIR dwg. 2520002)
-242
PERCUSSION CAP
224--
25200415Aug7
CARTRIDGE, Impulse (NAVAIR dwg. 2520045)Source: Areo Engineering Corp. P/N SK 86-0016-1Source control dwg.: 2520045Federal stock no.: 1377-490-6251DOD code no.: M654Qualification: MIL-D-21625 type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +1600FCook-off temperature: 300°FImpetus:Weight: .068 lb.
IGNITER, percussionSpecification no.: Army Ord. dwg 8596412No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE, double-base, hi tempSpecification no.:Weight: 1.5 gmGrantlation:Flame temperature:
APPLICATIONS: spreading gun in MA, B, C and E aircraft escape syste:
NOTES:
15Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 2520045)
0.866-, .
- ---2.72 ~t[~.375
PRIMERMAIN CHARGE
O-RING PRIMER HOUSING
I294ASW00
15Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 294AS100)Source: Martin Baker Aircraft Ltd. P/N MBEU 36120Source control dwg.: 294AS100Federal stock no.: 1377-245-2959DOD code no.: M571Qualification: MIL-D-21625 type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +1600FCook-off temperature: 225*FImpetus:Weight: .230 lb.
IGNITER, percussionSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominpl delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Personnel restraint harness take-up reel (MBEU-3506 and3800) in A-6A, F-4, F-8 aircraft escape systems.
NOTES:
pI
29 4AS 100115Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 294AS100)
L 2.635-
GUN POWDER PERCUSSION CAP
PROPELLENT
29/ASO0015Aug73
CARTRIDGE, Delay(NAVAIR dwg. 297AS100)Source: Ordnance Engineering Associates P/N 2130750Source control dwg.: 297AS100Federal stock no.: 1377-245-2962*DOD code no.: M719"Qualification: MIL-D-21625 type III-BService life: 18 mo. installed, 5 yz. totalTemperature limits: -650 to +1,00FCook-off temperature.Impetus:Weight:
IGNITI*R, percussion, primer M42Specification no.: MIL-P-20444No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits: 0.75 sec/0.60 to 0.90Delay material:
BOOSTER CHARGE, black powderSpecification no.:Weight: .50 gmGranulation: A4
MAIN CHARGE, double base, 030 SP M2Specification no..Weight: .40 gmGranulation: l-perf, D=.067, d=.007, h=.247 in.Flame temperature:
APPLICATIONS: Delay Initiator, OEA P/N 21301100 (296AS100), F-4aircraft escape system.
NOTES: *Device; sealed assembly
229<
297 AS 10015Aug13
CARTRIDGE, Delay (NAVAIR dwq. 297AS100)
1. 750
CME CLOSURE DISK
309AS10015Aug73
CARTRIDGE, Delay (NAVAIR dwg. 309AS100)Source: Ordnance Engineering Associates P/N 2129500Source control dwg.: 309AS100Federal stock no.: 1377-245-296DOD code no.:Qualification: MIL-D-21625 type III-BService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Beam material:Booster material:Charge:
DELAY, pyrotechnicSpecification no.:Nominal delay/specification limits: 0.3 sec/Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Delay Initiator, OEA 2129100 (307AS100), F-4 aircraftescape system.
NOTES:
231< ,
309ASIOO15Aug73
CARTRIDGE, Delay (NAVAIR dwg. 309AS100)
0.1375 0.25
1.25 0.4375
PRIMER CASE
232<.
310AS10015Aug73
CARTRIDGE, Delay (NAVAIR dwg. 310AS100)Source: Ordnance Engineering Associates P/N 21291100Source control dwg.: 310AS100Federal stock no.: 1377-245-2960DOD code no.:Qualification: MIL-D-21625 type III-BService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +160*FCook-off temperature: 300OFImpetus:Weight:
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY, pyrotechnicSpecification no.:Nominal delay/specification limits: 0.4 sec./.300 to .508 secDelay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Delay Initiator, OEA 21291500 (308AS100), F-4 aircraftescape system.
NOTES:
233<
310AS10015Aug73
CARTRIDGE, Delay (NAVAIR dwg. 31OAS100)
0.375 02
0-RING
PRIMER
0I
PROPELLANT
234<
314AS100
15Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 314AS100)Source: Ordnance Engineering Associates P/N 2130900Source control dwg.: 314AS100Federal stock no.: 1377-245-2963DOD code no.:Qualification: MIL-D-21625, type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160°FCook-off temperature:Impetus:Weight:
IGNITER, percussion, primer 72MSpecification no.: MIL-P-46610No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
BOOSTER CHARGE, black powderSpecification no.:Weight: 0.50 gmGranulation: A4
MAIN CHARGE, double base, M2Specification no.:Weight: 0.10 gm 015SPM2; 1.60 gm 030SPM2Granulation: 0.15SPM2
0.30SPM2 1 perf, D=.067, d=.007, h=.247 in.Flame temperature:
APPLICATIONS: Initiator, OEA P/N 2130300 (312AS100), F-4 aircraftescape system.
NOTES:
o35<
314AS10015Aug73
CARTRIDGE, Impulse(NAVAIR dwg. 314AS100)
1.50-
0. 75o .625
CLOSURE DISK
CASEI0
PRIMER O-RING
25<
315AS10015Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 315AS100)Source: Ordnance Engineering Associates P/N 21301500Source control dwg.: 315AS100Federal stock no.: 1377-245-2964DOD code no.:Qualification: MIL-D-21625, type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER, percussion, primer 72MSpecification no.: MIL-P-46610No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material;Booster material:Charge:
BOOSTER CHARGE, black powderSpecification no.:Weight: 0.30 gmGranulation: A4
MAIN CHARGE, double-base, M2Specification no.:Weight: 0.10 gm 015SPM2, 0.95 gm 030SPM2Granulation: 015SPM2
030SPM2 l-perf, D=.067, d=.007, h=.247 in.Flame temperature:
APPLICATIONS: Initiator, OEA P/N 21301300 (313AS100), F-4 aircraft
escape system.
NOTES:
315AS10015Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 315ASI00)
CLOSURE DISK
•_ASET!
0.P81M2 0.6875
376AS10015Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 376AS100)Source: Talley Industries P/N 1146-275Source control dwg.: 376AS100Federal stock no.: 1377-404-1184DOD code no.: M357Qualification: MIL-D-21625, type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +I160 0FCook-off temperature:Impetus:Weight: .040 lb.
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire: 4 in-oz.All-fire: 26 in-oz.Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Personnel restraint harness take-up reel, Talley 1146-275 (376ASI00), in F-4 aircraft escape system.
NOTES:
376AS10015Aug73L
CARTRIDGE, Impulse (NAVAIR dwg. 376AS100)
1.715
0.810
CAEMAIN CHARGE CLOSURE DISK
PRIMER BOOSTER
548AS10015Aug73
CARTRIDGE, Delay (NAVAIR dwg. 548AS100)Source: Ordnance Engineering Associates P/N 2130800Source control dwg.: 548AS100Federal st-ck no.:DOD code no.:Qualification: MIL-D-21625, type III-BService life: 18 mo. installed, 5 yr. totalTemperature limits: -650 to +200°FCook-off temperature:Impetus:Weight:
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY, pyrotechnicSpecification no.:Nominal delay/specification limits: 0.75 sec/0.562 to 0.938 secDelay material:
BOOSTER CHARGE, black powderSpecification no.:Weight: 0.5 gmGranulation: A4
MAIN CHARGE, double base, M2Specification no.:Weight: 0.80 gmGranulation: l-perf, D=.067, d=.007, h=.247 inFlame temperature:
APPLICATIONS: Explosive Valve, OEA P/N 2192100-1 (627AS100) F-4aircraft escape system.Delay Initiator, OEA P/N 21301900 (547AS100) F-4aircraft escape system.
NOTES:
241<
-I ;
54 8AS 10015Aug73
CARTRIDGE, Delay(NAVAIR dwg. 548AS100)
1.750
0.875: 0.500
CLOSURE DISK
PRIMER
242<
r
6-. AS 115Au('
CARTRIDGE, Impulse (NAVAIR dwg. 626AS100)Source: Ordnance Engineering Associates P/N 2197200Source control dwg.: 626AS100Federal stock no.: 1377-412-3205DOD code no.: M359Qualification: MIL-D-21625, types III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +200eFCook-off temperature:Impetus:Weight:
IGNITER, electricSpecification no.:No-fire: 1.0 ampAll-fire:Recommended firing:Bridge resistance 1.0 ohm +.2Bridge material:Bead material:Booster material:Charge:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE, M2Specification no.:Weight: 0.8 gmGranulation:Flame temperature:
APPLICATIONS: Canopy thrusters, OEA 2197100-2 (624AS100) and OEA2197100-3 (625AS100), F-4 aircraft escape system.
NOTES:
243<
626AS100 -15Auq73
CARTRIDGE, Im|,ulse(NAVAIR dwg. 626AS100)
1I Qx0535
1.55
O-RING DISK
//
PINS CASE PROPELLANT
244<
U-•I
J//
644AS10015Aug73
CARTRIDGE, Initiator (NAVAIR dwq. 644AS100)Source: Martin Baker Aircraft, Ltd. P/N MBEU 50058Source control dwg.: 644AS100Federal stock no.:DOD code no.:Qualification: MIL-D-21625, Type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -800 to +225 0 FCook-off temperature 4509FImpetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:"Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:No.-inal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE, CS5110G40Specification no.:Weight: 18 grGranulation:Flame temperature:
APPLICATIONS: F-14 and A6A aircraft escape systems.
NOTES:
245<
644AS10015Aug73
CARTRIDGE, Impulse (NAVAIR dwg. 644AS100)
T 20.7500
0O.780b1a
2464V
682AS10015Aug73
CUTTER, CARTRIDGE ACTUATED, (NAVAIR dwg. 682AS100)Specification no.:Drawing list no.: 682AS100Federal stock no.:DOD code no.: M515Qualification:Service life: 18 months installed, 5 years totalTemperature limits: -651 to +165*FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,:pcification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Installed in recovery parachute canopy of MQM-74
target drone.
NOTES:
247<
682ASI0015Aug73
CUTTER, CARTRIDGE ACTUATED, (NAVAIR dwg. 682AS100)
0.812
0=[ If! 0f
4.000 -
,l48-
685AS10015Aug73
CARTRIDGE, IMPULSE (NAVAIR dwg. 6'85AS100)Source: Talley Industries, P/N 5000-1Source control dwg.: 685AS100Federal stock nQ.:DOD code no.:Qualification: MIL-D-21625, type IIl-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +200 0 FCook-off temperature: 425 0FImpetus:Weight: 0.032 lb.
IGNITER, percussionSpecification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Rotary Actuator, Talley Industries P/N 1000-39 T-33BA/C escape system.
NOTES:
249<
685AS10015Aug73
CARTRIDGE, IMPULSE (NAVAIR dwg. 685AS100)
0.555 0.500
"--3.095 07.
BOOSTER CHARGE CASE CLOSURE DISK
PRIMER DISK MAIN CHARGE
250<
M28A115Aug73
CARTRIDGE, IMPULSE, M28A1Specification no.: MIL-C-46271Source: Frankford ArsenalFederal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -65* to +160*FCook-off temperature:Impetus:Weight: 0.335 lb.
IGNITER, primer, percussion, 50M (or equal)Specification no.: MIL-P-46610No-fire: 2-1/2 inchesAll-fire: 15 inchesRecommended firing:Charge: Remington Arms 5061W.
IGNITER, black powder, grade A-1Specification no.: MIL-P-223Weight: 4.21 gmGranulation: A-1
MAIN CHARGE, propellant, M-6Specification no.: JAN-P-309Weight: 82.3 gm.Granulation: cylindrical sticks - 1.240 L.X.630 diam.Flame temperature:
APPLICATIONS: Catapult, Aircraft Ejection Seat, M5Al .(M324).
NOTES:
251'
M28A115Aug73
CARTRIDGE, IMPULSE, M28A1
I ~ ~~~~~4.781- ____________________
1.662
0.26
CASE
PROPELLANT,
PACKING, 0-RING IGNITER
SEALING DISK
FIRN PIGNITING DISK
PRIMER
252<
I41
M29A215Aug73
CARTRIDGE, IMPULSE, M29A2Specification no.: MIL-C-46615Source: Frankford ArsenalFederal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -65° to +160*FCook-off temperature: will cook-off @ 300 0 F after 1 hourImpetus:Weight: 0.119 lb.
I'•[[LR, •-iar, percussion 50M (or equal)Specification no.: MIL-P-46610No-fire: 2-1/2 inchesAll-fire: 15 inchesRecommended firing:Charge: Remington Arms 5061W
IGNITER, black powder, grade A-4Specification no.: MIL-P-223Weight: 1.62 gmGranulation: A-4
MAIN CHARGE, propellant M2Specification no.: MIL-STD-652Weight: 8.42 gm.Granulation: cylindrical - .485 L. x .250Flame temperature:
APPLICATIONS: Remover, Aircraft Canopy, MlA3 (M246).
NOTES:
a.5<
M2 9A215Aug73
CARTRIDGE, IMPULSE, M29A2
1 .69
1.392 1.247
CASE PROPELLANTPACKING, 0-RING
M31AI15Aug73
CARTRIDGE, IMPULSE', M3lAlSpecification no.: MIL-C-46239Source: Frankford ArsenalFederal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -65* to +160 0 FCook-off temperature:impetus:Weight: 0.127 lb.
IGNITER, primer, percussion 50M (or equal)Specification no.: MIL-P-46610No-fire: 2-1/2 inchesAll-fire: 15 inchesRecommended firing:Charge: Remington Arms 5061W
IGNITER, black powder, grade A-iSpecification no.: MIL-P-223Weight: 1.62 gm.Granulation: A-i
MAIN CHARGE, propellant, M2Specification no.. MIL-STD-652Weight: 25.3 gm.Granulation: cylindrical - .243 L. x .073 diamFlame temperature:
APPLICATIONS: Remover, Aircraft Canopy, M3AI (M249).
NOTES:
255<
M3 1A115Aug73
CARTRIDGE, IMPULSE, M31AI
1.245 1.087
0.26K
2.91-
CASE
J 4 PROPELLANT
/ Vol
! M42
15Aug73
PRIMER, Percussion, M42Specification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:No-fire: 2 in-oz (1)All-fire: 13 in-oz (1)Recommended firing:Charge:
APPLICATIONS:
NOTES: (1) 0.02" firing pin radius.
%
M4215Aug73
PRIMER, Percussion, M42
0.1 76-- -0. 9
SIG
N ITER
0.112
CASE
•.<
M5515Aug73
IGNITION ELEMENT, Electric, M55Specification no.:Drawing list no.:Federal stock no.:DOD code no.: M264Qualification:Service life: 1 ycar installed, 5 years totalTemperature limits: -651 to +165*FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing: 5.0 amp. at 20 voltsBridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:Main charge data:Flame temperature:
APPLICATIONS: MARK 8 MOD 4 bomb shackle; aero 65A bomb rack; MARK 51MOD 14 bomb rack.
NOTES:
MS5515Aug73
IGNITION ELEMENT, Electric, M55
0.375 025CLOSURE DISK
INSULAT.OR
0.750
PIN
BODY MAIN CHARGE
260<
M7315Aug73
CARTRIDGE, IMPULSE, M73Specification no.: MIL-C-46618Source: Frankford ArsenalFederal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -65* to +160 0 FCook-off temperature:Impetus:Weight: 0.021 lb.
IGNITER, j•rimer, percussion 72M (or equal)Specification no.: MIL-P-46610No-fire: 2-1/2 inchesAll-fire: 15 inchesRecommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge: Remington Arms 5061W
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
IGNITER, black powder A-4Specification no.: MIL-P-223Weight: 1.04 gm.Granulation: A-4
MAIN CHARGE, propellant, type HES5808, compositeSpecification no.: noneWeight: 2.92 gm.Granulation: cylindrical - .455 L. x .190 diamFlame temperature:
APPLICATIONS: Initiator, Cartridge Actuated, M5A2 (M692).
NOTES:
k61<
M7315Aug73
CARTRIDGE, IMPULSE, M73
- ... 1.350 -...
0.710, 10.551
"P-PL0.250
PROPELLANT
PRIMER SEAL CASE
d "6 2 -
M9115Aug73
CARTRIDGE, IMPULSE, M91Specification no.: MIL-I-60518(MU)Source: Frankford ArsenalFederal stock no.:DOD code no.:Qualification: MIL-D-21625, type III-AService life: 18 mo. installed, 5 yr. totalTemperature limits: -65° to +200°FCook-off temperature: 350 0FImpetus:Weight: 0.024 lb.
IGNITER, percussion, primer M29A1Specification no.: MIL-P-2496No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge: Remington Arms mix. no. 5061 FA dwg. 8798312
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 0.97 gm.Granulation: class 5
MAIN CHARGE, HES 5808, ammonium perchlorate cellulose acetateSpecification no.: f.A. dwg. C-10534817Weight: 2.01 gm.Granulation: 7-perf, D=.190, d=.014, h=.450 in.Flame temperature:
APPLICATIONS: M28 initiator, T-33A A/C escape system.
NOTES:
M9115Aug73
CARTRIDGE, IMPULSE, M91
0.814 J0.720
0.25
t1.025
CASE
HEAD PROPELLANT
PRME
FIRING PLUG CUP
264<
M9315Aug73
CARTRIDGE, Delay, M93Specification no.:Source: Frankford ArsenalFederal stock no.:DOD code no.:Qualification: MIL-D-21625, type III-AService life: 30 mo. installed, 5 yr. totalTemperature limits: -65* to +200*FCook-off temperature: 325*FImpetus:Weight: 0.057 lb.
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge: Remington Arms mix. no. 5086, FA dwg. 8799925
DELAY, pyrotechnic, barium chromate/boron type-10 delay compositionSpecification no.: F.A. dwg. 8593163 (MB delay element)Nominal delay/specification limits: 1.0 sec.
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 1.09 gm.Granulation: class 5
MAIN CHARGE: HES 5808 ammonium perchlorate cellulose acetateSpecification no.: F.A. dwg. C-10534817Weight: 3.37 gm.Granulation: 7-perf. D=.190, d=.014, h=.450 in.Flame temperature:
APPLICATIONS: M32A1 initiator, T-33A A/C escape system.
NOTES:
S6<
M9315Aug73
CARTRIDGE, Delay, M93
•+-0.26
0.877 -0.689
2.287
PROPELLANT
-DELAY ELEMENT
PRIMER/
O-RI NG.
M11915Aug73
CARTRIDGE, IMPULSE, M119Specification no.: MIL-C-60604Source: Frankford ArsenalFederal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -65* to +160*FCook-off temperature:Impetus:Weight: 0.023 lb.
IGNITER, primer, percussion, 72M (or equal)Specification no.: MIL-P-46610No-fire: 2-1/2 inchesAll-fire: 15 inchesRecommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge: Remington Arms 5061W
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
IGNITER, black powder, grade A-4Specification no.: MIL-P-223Weight: 0.194 gm.Granulation:A-4
MAIN CHARGE, propellant. M-6, modifiedSpecification no.: JAN-P-309Weight: 2.92 gm.Granulation: cylindrical - .150 L. x .123 diam,Flame temperature:
APPLICATIONS: Thrilster, Cartridge Actuated, M13, (M881) used onTA-4E aircraft.
NOTES:
%67<
M11915Aug73 .
CARTRIDGE, IMPULSE, M119
--i t-•. 25
0.880 0.710
4-1. 020-
CASESEAL
IGNITER
PRIMER
PROPELLANT
IRI NG
/
M12915Aug73
CARTRIDGE, DELAY, M129Specification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:
V Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS:
NOTES:
S69<
M1 2915Aug73
CARTRIDGE, DELAY, M129
0.525 _____________ 0.475
- 2.48.1
CUTTER
PR-RMEG
CASE<
PRPLLN
Ml15Aug
CARTRIDGE, INITIATOR, DELAY, M155Specification no.:Source: Frankford ArsenalFederal stock no.:DOD code no.:Qualification: MIL-D-21625, type III-AService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +2000FCook-off temperature: 325*FImpetus:Weight: 0.058 lb.
IGNITER, percussion, primer M42Specification no.: MIL-P-20444No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge: Remington Arms mix no. 5086, FA dwg. 8799925
DELAY, pyrotechnic, barium chromate/boron, type 10 delay composi:ionSpecification no.: F.A. dwg. D-10521650 (M28 delay element)Nominal delay/specification limits: 0.5 sec.
BOOSTER CHARGE, black powderSpecification no.: MIL-P-223Weight: 1.81 gm.Granulation: class 5
MAIN CHARGE, HES 5308, ammonium perchlorate cellulose acetateSpecification no.: F.A. dwg. C-10534817Weight: 3.37 gm.Granulation: 7-perf, D=.190, d = .014, h = .450 in.Flame temperature:
APPLICATIONS: M72 initiator, T-33B A/C escape system.(Replaces M32A1 initiator)
M92 delay initiator, QT-33A aircraft escape system.
NOTES:
1415515Aug73
CARTRIDGE, INITIATOR, DELAY, M155
.268
2.287
PROPELLA NT
PACKING, 0-RING
SEALING DISK
02.72<
50M15Aug73
PRIMER, Percussion, 50MSpecification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weiqht:No-fire: 20 in-oz(I)All-fire: 120 in-oz(I)Recommended firing:Charge:
APPLICATIONS:
NOTES: (1) 0.045" firing pin radius.
273<
50M15Aug73
PRIMER, Percussion, 50M
(PICTORIAL INFORMATION NOT AVAILABLE.)
'0-7 4
72M15Aug73
PRIMER, Percussion, 72MSpecification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:No-fire: 20 in-oz.(l)All-fire: 120 in-oz.(l)Recommended firing:Charge:
APPLICATIONS:
NOTES: (1) 0.045" firing pin radius.
%75<
72M15Aug73
PRIMER, Percussion, 72M
(PICTORIAL INFORMATION NOT JAILABLE.)
14M
116M15Aug73
PRIMER, Percussion, 116MSpecification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limitsCook-off temperature:Impetus:Weight:No-fire: 6 in-oz.(i)All-fire: 36 in-oz.(i)Recommended firing:Charge:
APPLICATIONS:
NOTES: (1) 0.039" firing pin radius.
Z77<
116M15Aug73
PRIMER, Percussion, 116M
(PICTORIAL INFORMATION NOT AVAILABLE.)
7 78
120M15Aug73
PRIMER, Percussion, 120MSpecification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:No-fire:All-fire:Recommended firing:Charge:
APPLICATIONS: Cartridge, Impulse, MARK 38 MOD 0.
NOTES:
S79<
120M15Aug73
PRIMER, Percussion, 120M
(PICTORIAL INFORMATION NOT AVAILABLE.)
Sso<
MW-4315Aug73
CARTRIDGE, Reduced Charge Primary (MW-43)Specification no.ýDrawing list no.:Federal stock no.:DOD code no.: MW-43Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -650 to +160 0 FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-firetAll-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Martin Baker Ejection Seat (AV-8A aircraft only).
NOTES:
MW-4315Aug73
CARTRIDGE, Reduced Charge Primary (MW-43)
1.748 1.843
2.574-
BRASS WASHER CLOSURE DISK CASE BOOSTER
RUBBER GASKET .
MAIN CHARGE PERCUSSION CAP
282<
MW4 515Aug73
CARTRIDGE UNIT, Aircraft Fire Extinguisher, 2-Pin No. 1, MK 3Source: Graviner, EnglandDrawing list no.:Federal stock no.:DOD code no.: MW45Qualification:Service life: I year installed, 4 years totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER, electricSpecification no.:No-fire:All-fire:Recommended firi.ng:Bridge resistance: 5-6 ohmBridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE, G20 gunpowderSpecification no.:Weight: 10 grainsGranulation:Flame temperature:
APPLICATIONS: AV-SA automatic fire extinguisher.
NOTES:
Z83<
/
MW4515Aug73
CARTRIDGE, UNIT, Aircraft Fire Extinguisher, 2-Pin No. 1, MK 3
TRANSIT PLUG
CONTACT PINS
BODY FUSE PLUG
FUSE BOBBIN
MAGAZINE CHARGE
484<
' 1'
MW4 615Aug73
IGNITER, Frangible Pillar Assembly, MK 3Source: Hymatic Engineering Co., England, PAF 205-002Drawing list no.:Federal stock no.:DOD code no.: MW46Qualification:Service life: 18 months installed, 4 years totalTemperature limits: -150* to +235*FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire: 1.0 amp.Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weiant:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS:
NOTES:
L85<
MW4 615Aug73
IGNITER, Frangible Pillar Aasenmbly, MK 3
PILLAR
CAST IRON
\Il BODY
H~CEMENTIGNIITER CEEN
I NSULATI NG '
SLEEVE SEALING
"BRONZE SLEEVE
LOCATING RETAININGPLATE RING
P.V.C. ISULATEDLEAD
MW4 715Aug73
CORD, Miniature Detonating (MW47)Source: Royal Ordnance Factory P/N E1914A55Drawing list no.:Federal stock no.:DOD code no.: MW47Qualification:Service life: 13 months installed, 2 years totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: AV-8A cockpit canopy.
NOTES:
%87<
MW•47
15Aug73
CORD, Miniature Detonating, P/N E1914A55
(PICTORIAL INFORMATION NOT AVAILABLE.)
i 88<
NW-4815AUg73
DETONATOR ASSEMBLY (MW-48)Specification no.:Drawing list no.:Federal stock no.:DOD code no.: MW-48Qualification:Service life: 18 months installed, 2 years totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fi-re:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Martin Baker Ejection Seat (AV-8A aircraft only)
NOTES:
MW-4815Aug73 )
DETONATOR ASSEMBLY (MW-48)
(PICTORIAL INFORMATION NOT AVAILABLE.)
DUP S-(15AugI
SQUIB, S-68, 10 GrainSource: DupontDrawing list no.:Federal stock no.:DOD code no.:Qualification:Service life: 2 years totalTemperature limits: -65° to +I.3*FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing: 3.0 ampsBridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: QF-9F drone fire error indicator explosive bolt.
NOTES:
291 <
DUP S-6815Aug73
SQUIB, S-68, 10 Grain
0ýflJJJ30. 656
WIRE LEADSMAIN CHARGE
CRIMPSSH N
IGNITION BEAD
0-92<
HOL32115Aug7
CARTRIDGE, Impulse, Holex P/N 3215Source: Holex Inc.Source control dwg.:Federal stock no.: 1377-113-9049DOD code no.: M009Qualification: MIL-D-21625, type III-BService life: 30 mo. installed, 5 yr. totalTemperature limits: -650 to +160 0 FCook-off temperatureImpetus:Weight: .040 lb.
IGNITER, electricSpecification no.:No-fire:Ali-fire:Recommended firing: 5.0 ampBridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Hoist cable cutter, Breeze P/N 3032, in UH-34Dhelicopter.
NOTES:
HOL321515Aug73 I
CARTRIDGE, Impulse, Holex P/N 3215
(PICTORIAL INFORMATION NOT A'TAILABLE.)
%94<
MBE 2772215Aug73
CARTRIDGE, Drogue, (MBEU P/N 27722)Specification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -65° to +I160°FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Martin Baker Ejection Seat (AV-8A aircraft only).
NOTES:
295<
MBE 2772215Aug733
CARTRIDGE, Drogue, (MBEU P/N 27722)
04 705___ 0.623
WASHER
PRECUSSION CAP
BRASS DISK
MBE 3575615Aug73
CARTRIDGE, Secondary Catapult, (MBEU P/N 35756)Specification:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 5 years totalTemperature limits: -650 to +160 0FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:FPcommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Martin Baker Ejection Seat (AV-8A aircraft only).
NOTES:
297<
MBE 3575615Aug73 1
CARTRIDGE, Secondary Catapult, (MBEU P/N 35756)
RUBBER SEALING RING CS
3.270
GUN POWDER
0.610 I
COPPER DISKCOE
~98,e
MBE 4118415Aug73
CARTRIDGE, Harness Retraction and Seat Firing (MBEU P/N 41184)Specification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 4 years totalTemperature limits: -650 to +160°FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flarre temperature:
APPLICATIONS: Martin Baker Ejection Seat (AV-8A aircraft only).
NOTES:
299<
MBE 411841 5Aug 73
CARTRIDGE, Harness Retraction and Seat Firing (MBEU P/N 41184)
T0.95 0.85
-2.25
END CAP MI HRECS
PRECUSSION CAP PIE
,300<
HEB 4188015Aug73
CARTRIDGE, Guillotine and Harness Release (MBEU P/N 41880)Specification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life: 30 months installed, 4 years totalTemperature limits: -65* to +160 0 FCook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:.Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
KNIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Martin Baker Ejection Seat (AV-8A aircraft only).
NOTES:
301<
MBE 4188015Aug73
CARTRIDGE, Guillotine and Harness Release (MBEU P/N 41880)
TFETILLJ .87H -1.45
END CAP PRIMER CASE
PRECUSSION CAP MAIN CHARGE
302<
MCS 80720'15Aug7l
GENERATOR, Gas, (McCormick-Selph P/N 807207)Specification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life: 36 months installed, 5 years totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Installed in hydraulic power transmitter unit gasgenerator, (NAVAIR dwg. 2518507),(McCormick-SelphP/N 807270).
NOTES:
303<
MCS 80720715Aug73
GENERATOR, Gas, (McCormick-Selph P/N 807207)
(PICTORIAL INFORMATION NOT AVAILABLE.)
304<
MCS 80726815Aug73
THRUSTER, Cartridge Actuated, McCormick-Selph P/N 807268Source: McCormick-SelphSource control dwg.:Federal stock no.:DOD code no.: M395Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specil fication no.:Nominal delay/specification limits:Delayed material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHAGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: T-39D aircraft emergency escape hatch.
NOTES:
305<
MCS 80726815Aug73
THRUSTER, Cartridge Actuated, McCormick-Selph P/N 807268i/
CARTRIDGEHOLEDER
CARTRIDGE---
THRUSTERASSEMBLY
306<
MCS 80727415Aug73
CARTRIDGE, Delay, (McCormick-Selph P/N 807274)Specification no.:Drawing list no.:Federal stock no.:DOD code no.:Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing.Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS:
NOTES:
3*OT<
MCS 80727415Aug73
CARTRIDGE, Delay, (McCormick-Selph P/N 807274)
(PICTORIAL INFORMATION NOT AVAILABLE.)
308<
MSA TA9685015Aug73
CUTTER, Webbing, Cartridge Actuated, Mine Safety Appliances P/N TA96850Source: Mine Safety Appliances Co.Source control dwg. no.:Federal stock no.:DOD code no.: M470Qualification:Service life:Temperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS:
NOTES:
'i09<
MSA TA9685015Aug73
CUTTER, Webbing, Cartridge Actuated, Mine Safety Appliances P/N TA96850
®> > I1.5
-~2.5
310<
OEA 2245116-115Aug73
NP
CARTRIDGE, Tray Thruster, Ordnance Engineering Associates P/N 2245116-1Source: Ordnance Engineering AssociatesSource control dwg. no.:Federal stock no.:DOD code no.:Qualification: MIL-D-23615 type III-A (w. documentation)Service life: 30 mo. installed, 5 yr. totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charget
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Tray thruster (OEA P/N 2245100) S-3A aircraft aircrewescape system.
NOTES:
OEA 2245116-115Aug73
CARTRIDGE, Tray Thruster, Ordnance Engineering Associates P/N 2245116-1
"-0.750 •
CASE0.5625
PR!MER
POWDER
312 <
rOEA 2248130
15Aug73
CARTRIDGE, Delay, Ordnance Engineering Associates P/N 2248130Source: Ordnance Engineering AssociatesSource control dwg.Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IIService life: 18 months installed, 5 years totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits: .3 sec.Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS: Delay initiator, P/N 2248100 S-3A aircraft aircrew
escape system.
NOTES:
.j13<
OEA 224813015Aug73
CARTRIDGE, Delay, Ordnance Engineering Associates P/N 2248130
1.750
0.875 0.500
>CASE
S~MAIN CHARGE
SDELAY ELEMENT
o RING
PRIMER
314<
PSC 0103826-1U 15Aug73
GENERATOR, Gas, Pacific Scientific Company P/N 0103826-1Source: Pacific Scientific Co.Source control dwg.:Federal stock no.:DOD code no.:Qualification: MIL-D-21625, type IService life:Temperature limits:Cook-off temnrerature:Impetus:Weight:
IGNITER,Specification no.:No-fire:All-fire:Recommended firing:Bridge resistance:Bridge material:Bead material:Booster material:Charge:
DELAY,Specification no.:Nominal delay/specification limits:Delay material:
BOOSTER CHARGE,Specification no.:Weight:Granulation:
MAIN CHARGE,Specification no.:Weight:Granulation:Flame temperature:
APPLICATIONS:
NOTES:
I.5<
PSC 0103826-115Aug73
GENERATOR, Gas, Pacific Scientific Company P/N 0103826-1
(PICTORIAL INFORMATION NOT AVAILABLE.)
316<
i UPC 1004-4S~15Aug73
GENERATOR, Gas, Gyro Spin-Up, Universal Propulsion Company P/N 1004-4Source: Universal Propulsion Co.Source control dwg. no.:
S~Federal stock no.:L DOD code no.:
Qualification: MIL-D-21625, type 1II-AService life: 30 months installed, 5 years totalTemperature limits:Cook-off temperature:Impetus:Weight:
IGNITER, primer, percussion, Remington 44G-11Specification no.:No-fire:All-fire:Recommended firing:Booster material: barium potassium nitrate (BKNO 3 ) powderCharge: 40 grains
BOOSTER CHARGE, barium potassium nitrate (BKNO 3 ) pelletsSpecification no.:Weight: 5 pieces by countGranulation: 0.125" diam. by 0.187" long
MAIN CHARGE, Hercules HES 6574Specification no.:Weight: 2.075 grainsGranulation: 7 perf. D=0.25" d=0.026, h= (1)Flame temperature: 2998 0 K
APPLICATIONS: S-3A aircraft crew escape system.
NOTES: (1) Contains approximately 40 pieces with h=0.05" and 20pieces with h=0.04". Ratio may vary.
317<
UPC 1004-415Aug73
GENERATOR, Gas, Gyro Spin-Up, Universal Propulsion Company P/N 1004-4
-2.50
1.00
1.25 ._ACROSS
FLATS
PROPELLANT
PRIMER
0 CLOSURE DISK
SHEAR PIN
318<I
INDEX (15 AUG 1973)
CARTRIDGE, ACTUATOR, MARK 25 MOD 0CARTRIDGE, ACTUATOR, MARK 26 MOD 0CARTRIDGE, ACTUATOR, MARK 27 MOD 0CARTRIDGE, ACTUATOR, MARK 28 MOD 0CARTRIDGE, ACTUATOR, MARK 29 MOD 0
CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER, 2518509CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER, 2518519CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER, 2519590CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER, 2519614CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER, 251970Y7
CARTRIDGE, DELAY, MARK 3 MOD 0CARTRIDGE, DELAY, MARK 4 MOD 2CARTRIDGE, DELAY, MARK 5 MOD 2CARTRIDGE, DELAY, MARK 6 MOD 2CARTRIDGE, DELAY, MARK 16 MOD 0CARTRIDGE, DELAY, MARK 31 MOD 0CARTRIDGE, DELAY, MARK 35 MOD 0CARTRIDGE, DELAY, MARK 36 MOD 0CARTRIDGE, DELAY. MARK 76 MOD 0CARTRIDGE, DELAY, MARK 84 MOD 0CARTRIDGE, DELAY, MARK 85 MOD 0CARTRIDGE, DELAY, MARK 86 MOD 0CARTRIDGE, DELAY, MARK 87 MOD 0CARTRIDGE, DELAY, MARK 101 MOD 0CARTRIDGE, DELAY, MARK 136 MOD 0CARTRIDGE, DELAY, MARK 137 MOD 0CARTRIDGE, DELAY, MARK 141 MOD 0CARTRIDGE, DELAY, MARK 142 MOD 0CARTRIDGE, DELAY, CCU-4/ACARTRIDGE, DELAY, 2518508CARTRIDGE, DELAY, 297AS100CARTRIDGE, DELAY, 309AS100CARTRIDGE, DELAY, l10ASIO0CARTRIDGE, DELAY, 314ASI00CARTRIDGE, DELAY, 5L8ASI00CARTRIDGE, DELAY, M93CARTRIDGE, DELAY, M129CARTRIDGE, DELAY, MCS 807274CARTRIDLE, DELAY, OEA 2248130
CARTRIDGE, DROGUE, MBE 27722
CARTRIDGE, ENGINE STARTER, MXU-4ACARTRIDGE, ENGINE STARTER, MxU-4A/A
CARTRIDGE, GAS GENERATION, 2519608CARTRIDGE, GAS GENERATION, 2519676
CARTRIDGE, GUILLOTINE AND HARNESS RELEASE, MBE 41880
CARTRIDGE, HARNESS RETRACTION AND SEAT FIRING, MBE 411 8 4
CARTRIDGE, D4PULSE, MARK 2 MOD 1CARTRIDGE, IMPULSE, MARK 3 MOD 1CARTRIDGE, IMPULSE, MARK 8 MOD 0CARTRIDGE, IMPULSE, MARK 9 MOD 0CARTRIDGE, IMPULSE, *MARK 10 MOD 0CARTRIDGE, IMPULSE, MARK 13 MOD 0CARTRIDGE, IMPULSE, MARK 17 MOD 0CARTRIDGE, DIMTJLSE, MARK 17 MOD 1CARTRIDGE, IMPULSE. MARK 18 MOD 0CARTRIDGE, IMPULSE, MARK 19 MOD 0CARTRIDGE, IMPULSE, MARK 23 MOD 0CARTRIDGE, IMPUTTLSE, MARK 33 MOD 1CARTRIDGE, IIMPLSE, MARK 37 MOP 0CARTRIDGE, r.'PULSE, MARK 38 MOD 0CARTRIDGE, IMPULSE, MAR.' 39 MOD 0CARTRIDGE, D.'PTLSE, ,ARK 40 MOD 0CARTRIDGE, IMPUTSE, MARK 42 MOD 0CARTRIDGE, D..'IP-PSE, MARK 44 MOD 0CARTRIDGE, IMPULSE, M4ARK 44 MOD 0CARTRIDGE, IMPULSE, MARK 45 MOD 0CA:RTRIDGE, I'.-?JgSE, MARK 46 MOD 0CARTRIDGE, IM:TLSE, MARK 47 MOD 0CARTRIDGE, D=PULSE, MARK 49 MOD 0CARTRIDGE, I.PULSE, MARK 50 MOD 0CARTRIDGE, I4PULSE, MARK 51 MOD 1CARTRIDGE, I4PULSE, MARK 52 MOD 0CARTRIDGE, I14PULSE, MARK 53 MOD 0CARTRIDGE, IMPULSE, MARK 64 MOD 0CARTRIDGE, D.IPULSE, MARK 66 MOD 0CARTRIDGE, .=PULSE, VARK 67 MOD 0CARTRIDGE, IfPU7. E, MARK 73 MOD 0CARTRIDGE, _T:P-ULCE, *MARK 82 MOD 0CARTRIDGE, IMU-7,LSE, MA RK 85 MOD 0CARTRIDGE, I!..ULSE, MARK 97 MOD 0CARTRIDGE, I7P.FULSE, MARK 103 MOD 0CARTRIDGE, T.FJ•:~E, MARK 104 MOD 0
CARTRIDGE, ']L. E, MARK 105 MOD 0CARTRIDGE, !.TTJL2E, EX 107 MOD 5CARTRIDGE, IMPU=E, MARK 124 MOD 0CARTRIDGE, T!,.PJlIZ•E, M,!ARK 125 MOD 0CARTRIDGE, I .FILSE, I.-ARK 127 MOD 0CARTRIDGE, -" 7,,SE, MPARK 129 MOD 0CARTRIDGE, T:.:PTL.E, MARK 131 MOD 0CARTRIDGE, rI.'PULE, 2406377CARTRIDGE, r-.'JLE, 2518373CARTRIDGE, IMTIE, 2518126CARTRIDGE, 7.-PIJL2E, 2518431
320-r
CARTRIDGE, IMPULSE, 2518507CARTRIDGE, IMPULSE, 2519953CARTRIDGE, IMUE, 2519954CARTRIDGE, IMPULSE, 2520045CARTRIDGE, IMPULSE, 294AS1OOCARTRIDGE, IMPULSE, 315AS100CARTRIDGE, IMIPULSE, 376AS100CARTRIDGE, IMPULSE, 626AS100CARTRIDGE, IMPULSE, 644AS100CARTRIDGE, IMPULSE, 685AJI00CARTRIDGE, IMPULSE, M28A1CARTRIDGE, IMPULSE, M29A2CARTRIDGE, IMPULSE, M31A1CARTRIDGE, IMUJLSE, M73CARTRIDGE, IMPULSE, M91CARTRIDGE, IPULSE, M119CARTRIDGE, IMPULSE, HOL 3215
CARTRIDGE, IMfPULSE DROGUE, 2520002
CARTRIDGE, IMULSE GUILLOTINE, 2519698
CARTRIDGE, INITIATOR DELAY, M155
CARTRIDGE, JET ENGINE IGNITER, MARK 243 MOD 2
CARTRIDGE, PRIMARY CATAPULT, 2519697
CARTRIDGE, REDUCED CHARGE PRIMARY, 2519696-1CARTRIDGE, REDUCED CHARGE PRIMARY, MW43
CARTRIDGE, SECONDARY CATAPULT, 2519696-2CARTRIDGE, SECONDARY CATAPULT, MBE 35756
CARTRIDGE, TEST TURBOJET ENGINE, MARK U19 MOD 0
CARTRIDGE, TRAY THRUSTER, OEA 2245116-1
CARTRIDGE UlIT, AIRCRAFT FIRE EXTINGUISHER, MW45
CARTRIDGE-VIAL, LIFE RAFT, 2519527
CORD, MINTIATU E DETONATING, MW47
CUTTER, CARTRIDGE ACTUATED, MARK 18 MOD 0CUTTER, CARTRIDGE ACTUATED, 682ASI00
CUTTER, WEBBING, CARTRIDGE ACTUATED, MSA TA96850
DETONATOR ASSEMBLY, MW48
DETO0NATOR, ELECTRIC, MARK 83 MOD 0
GENERATOR, GAS, PSC 0103826-1GENERATOR, GAS, u-c 10o4-4 AV
GRAIN, PROPELLANT, 2518493
IGNITER, FRANGIBLE PILLAR ASSF•4BLY, MW46
IGNITION ELENT, ELECTRIC, MARK 10 MOD 0IGNITION ELEM= T, ELECTRIC, MARK 11 MOD 0IGNITION ELFMENT, ELECTRIC, MARK 13 MOD 0IGNITION EL1EENT, ELECTRIC, MARK 14 MOD 0IGNITION ELEMENT, ELECTRIC, MARK 17 MOD 0IGNITION ELR,'NT , ELECTRIC, MARK 22 MOD 0IGNITION ELR,=NT, ELECTRIC, M55
PRIMER, P•RCUSSION, M42PRIDER, PERCUjJSION, 50IMPRIMER, P=RCUSSION, 72MPRIMER, PERCUSSION, 116MPRIMER, PERCUSSION, 120M
PRJlIER, STA2, M.ARK 102 MOD 1
SQUIB, DUP S-68
SQUIB, ELECTRIC, 2518141SQUIB, ELECTRIC, 2518358SQUIB, ELECTRIC, 2518359SQUIB, ELECTRIC, 2519524SQUIB, ELECTRIC, 2519631
ThRUSTER, CARTRIDGE ACTUATED, MCI 807268
322c
INCREASING IMPETUS (FT-LB) OF CARTRIDGE
THIS INDEX CONTAINS ONLY THOSE CARTRIDGES FOR WHICH THE CARTRIDGEIMPETUS HAS BEEN CALCUIATED
IMPETUS CARTRIDGE
53 MARK 131 MOD 056 MARK 101 MOD 0 (DELAY)64 MARK 84 MODO (DELAY)79 MARK 4 MOD 2 (DEIAY)79 MARK 5 MOD 2 (DELAY)79 MARK 6 MOD 2 (DEIAY)96 CCU-4/A (DELAY)
100 MARK 36 MOD 0 (DELAY)fl0 MARK 23 MOD 0120 MARK 44 MOD O130 MARK 45 MOD 0158 MARK 87 MCD 0 (DELAY)160 240637724o MARK 83 MCD 0250 MARK 39 MOD O260 MARK 13 MOD 0330 MARK 3 MOD 0 (DELAY)330 MARK 16 MOD 0 (DELAY)330 MARK 86 MOD 0 (DELAY)340 MARK 127 MOD 034o MARK 141 MOD 0 (DELAY)390 MARK 105 MOD 0500 MARK 76 MOD 0 (DELAY)510 MARK 17 MOD 1510 MARK 19 MOD 0680 MARK 35 MOD 0 (DELAY)760 MARK 129 MOD 080o MARK 28 MOD o840 MARK 31 MOD 0 (DELAY)
1,020 MARK 25 MOD 01,200 MARK 66 MOD 01,260 MARK 29 MOD 01,280 MARK 33 MOD 01,330 MARK 142 MOD 0 (DELAY)1,370 MARK 51 MOD 01,690 MARK 27 MOD 01,750 MARK 50 MOD 01,960 MARK 97 MOD 02,050 MARK 14 MOD 02,050 MARK 37 MOD 02,150 MARK 85 MOD 02,660 MARK 38 MOD 02,840 MARK 43 MOD 02,900 MARK 10 MOD 0
IMPETUS CARTRIDGE 44
3,160 MARK 40 MoD 03,230 MARK 125 MCD 03,500 MARK 2 MOD 13,800 MARK 64 MOD 03,900 MARK 42 MOD 06,150 MARK 67 MOD 06,46o MARK 24 MOD 06,600 MARK 9 MOD 0
12,500 MARK 47 MOD 013,000 MARK 26 MOD 015,500 MARK 8 MoD 018,8oo MARK 1 MOD 318,800 MARK 82 MOD 020,300 EX 107 MOD 522,100 MARK 104 MOD 036,200 MARK 53 MOD 038,500 MARK 52 MOD 049,000 MARK 73 MOD 060,200 MARK 3 MOD 164,300 MARK 103 MOD 069,60o MARK 18 MOD 0
592,000 MARK 46 MOD 0
324<
INCREASING FLAME TMPEATURE (DEG K) OF CARTRIDGE
THIS INDEX CONTAINS ONLY THOSE CARTRIDGES FOR WHICH THE CARTRIDGE FLAMETEMPEATURE HAS BEEN CALCUIATED
FIAME TEMP. CARTRIDGE
2417 MARK 38 MOD 02417 MARK 50 MOD 02491 MARK 25 MOD 02491 MARK 26 MOD 02491 MARK 42 MOD 02491 MARK 43 MOD 02491 MARK 47 MOD 02552 MARK 1 MOD 32552 MARK 2 MOD 12552 MARK 82 MOD 02565 MARK 3 MOD 12565 M4ARK 1.03 MOD 02727 MARK 18 MOD 02812 MARK 46 MOD 02892 MARK 28 MOD 02892 MARK 66 MOD 02892 MARK 67 MOD 03037 MARK 4o mOD 03214 IMARK 9 MOD 03214 MARK 10 MOD 03214 MARK 53 MOD 03214 MARK 64 MOD 03214 EX 107 MOD 53214 MARK 124 MOD 03214 MARK 125 MOD 03221 MARK 8 MOD 03221 MARK 52 MOD 03221 MARK 73 MOD 03284 MARK 142 MOD 0 (DELAY)332.9 MARK 27 MOD 03319 MARK 35 MOD 0 (DELAY)3319 MARK 37 MOD 03630 MAJRK 13 MOD 03630 MARK 17 MOD 03630 MARK 19 MOD 03664 MARK 104 MOD 03771 MARK 4 MOD 2 (DELAY)3771 MARK 5 MOD 2 (DELAY)3771 MARK 6 MOD 2 (DELAY)3771 MARK 23 MOD 03771 MARK 33 MOD 13771 MARK 36 MOD 0 (DELAY)
3, 5<
FIAME TEMP. CARTRIDGE
3771 MARK 45 MOD 03771 MARK 51 MOD 13771 MARK 76 MOD 0 (DELAY)3771 MARK 84 MOD 0 (DEIAY)3771 MARK 85 MOD 0 (DElAY)3771 MARK 87 MOD 0 (DEIAY)3771 MARK 101 MOD 0 (DELAY)3771 MARK 105 MOD 03771 MARK 141 MOD o (DELAY)3780 MARK 31 MOD 0 (DELAY)3780 MARK 39 MOD 03780 MARK 127 MOD 03799 MARK 97 MOD 03799 MARK 129 MOD 03822 MARK 44 MOD 03822 ccu-4/A
326<