09.ag715_r
TRANSCRIPT
-
7/30/2019 09.Ag715_R
1/16
Copyright 2005-2012 CNH Belgium N.V. - All rights reserved.
Ag715 integrated radio
Sebastian Bawej
presentations - Michael Mahieu, Sebastian Bawej
-
7/30/2019 09.Ag715_R
2/16
2
New radio module
Slot-mounted underneath
Replaces Joey Ag900 & Ag450 radio
Same features and functionality as Joey Ag900 and Ag450
AG-715 is used with the AG-372 only
AG-715 Integrated Radio
-
7/30/2019 09.Ag715_R
3/16
3
AG-715 Integrated Radio
-
7/30/2019 09.Ag715_R
4/16
4
Markets Available for sale in all regions
The AG-715 is a Rx only radio
Ordering information
Available through aftermarket channel only
Even if AG-372 is ordered at the RTK level, a separate AG-715
purchase and installation is required
AG-715 Integrated Radio
88906-44 AG-715 Integraded Radio, 430-450 MHZ86452-01 RADIO MODULE, 450 MHz, WAHOO (BLADE)
88906-46 AG-715 Integraded Radio, 450-470 MHZ
86452-01 RADIO MODULE, 450 MHz, WAHOO (BLADE)
88906-90 AG-715 Integraded Radio, 900 MHZ
86219-00 Wahoo radio 900MHz
-
7/30/2019 09.Ag715_R
5/16
5
AG-715 will replace Joey Ag450 and Ag900
Joey Ag450 and Ag900 is not longer available
What about users with 252 / 262 that want to use RTK corrections? AG-715 integrates with AG-372 only
Joey Ag450 and Ag900 will no longer be produced
Joey Radio
-
7/30/2019 09.Ag715_R
6/16
Copyright 2005-2012 CNH Belgium N.V. - All rights reserved.
Add / Change Frequencies
-
7/30/2019 09.Ag715_R
7/167
1. Connections
12 VDC Computer
372 Receiver
(and integrated radio Ag715)
-
7/30/2019 09.Ag715_R
8/168
1. Start-up EST.
2. Select Intellisteer/Accuguide Autoguidance guidance system II /
Precision farming/ GPS
3. Select Additional tools
2. Add / Change frequencies
Not possible through CNH screen
-
7/30/2019 09.Ag715_R
9/169
2. Add / Change frequencies
-
7/30/2019 09.Ag715_R
10/16
10
2. Add / Change frequencies
This is the main screen of
AgRemote or GPS Remote
(EST). The ESC button will
always bring you back to the main
screen if needed.
From the main screen, press the
right arrow till it shows
configuration.
-
7/30/2019 09.Ag715_R
11/16
11
2. Add / Change frequencies
From the configuration screen,
press the down arrow till GPS
Configshows on the screen.
Then press the right arrow till RTK
Configshows on the screen
-
7/30/2019 09.Ag715_R
12/16
12
2. Add / Change frequencies
Then press the down arrow till
Radio Freq shows.
Then press the right arrow to get
the cursor blinking.
Then press the up arrow to cycle
through the frequencies and till
the screen shows New Freq. toadd a new Frequency.
-
7/30/2019 09.Ag715_R
13/16
13
2. Add / Change frequencies
NOTE: You will need to press the right arrow and the up or down arrows to
select your new frequency. Once you see the frequency that you
programmed press the enter button again to activate it.
Then press the right arrow tochange the frequency. The cursor
will be blinking and use the up
arrow to enter the first 3 digits of
the frequency. Then press the
right arrow to move the cursor tothe right to enter the decimal
number of the frequency. Then
press the enterbutton to enter the
frequency.
-
7/30/2019 09.Ag715_R
14/16
14
3. Change protocol and baud rate
Press the down arrow once and
the screen will show the radio
mode.
Press the right arrow to activatethe cursor to select the
appropriate Protocol and Link
Rate.
Use the up or down arrows to
select the Protocols and LinkRates. Once selected press the
enter button to activate the mode
selected. Then press the ESC
button to go back to the main
page.
-
7/30/2019 09.Ag715_R
15/16
15
-
7/30/2019 09.Ag715_R
16/16
16
COPYRIGHT BY CNH BELGIUM N.V.
All rights reserved. No part of the text or illustrations of
this publication may be reproduced.