0901 bmt jis ca · jis g4051 s20c-s48c jis g4051 s10c-s20c jis g4051 s20c-s48c jis g4051 s10c...

BITE TYPE FITTINGS

Tube Fittings for JIS & KS

Bite Type Tube Fitting for JIS & KS 2

SUPERLOK Bite Type Fitting is manufactured to JISB2351& KS B1535 under strict ISO 9001 procedure

Standard of SUPERLOK Bite Type Fitting

Bite type fitting consists of three parts : BODY, SLEEVEand NUT, and is designed to work over medium and heavywall tubing. See Fig.1

The sleeve is driven forward on the tube by the nut. As thesleeve moves forward it meets the seal seat angle of thebody which causes the sleeve to cam inward into the tube.The sleeve then bites into the tube causing a small ridge oftube material to be pushed up in front of the biting edge ofthe sleeve. See Fig.2

The make up of the fitting is critical in that the tube mustbe bottomed against the tube stop in the body or presettingtool during make up. If it is not bottomed the tube willmove forward with the sleeve and a bite will not beachieved.Make sure the tube is bottomed. A check is possible to seeif the tube was bottomed during make up. To make thischeck look at the end of the tube, and notice if a circularappearing ring has been impressed into the tube end face.This impression will be caused by the tube stop which has aslight reverse angle rather than a flat face.

Material Specifications

Pressure Range & Working Temperature

Tubing Selection

*Carbon Steel :

Seamless, welded, fully annealed and redrawn tube suitablefor bending with maximum hardness Rockwell B72.Carbon steel precision tubes for hydraulic line service,JOHS-102, OST-2(Oil Hydraulic Association Standards)or equivalent refer to page 33 of this catalog for thecomparison chart between this standard and other standardsfor easy selection.

*Stainless Steel :

Seamless, welded, fully annealed and redrawn tube suitablefor bending with maximum hardness Rockwell B90

*Copper :

For seamless coils, soft or light annealed, maximumhardness Rockwell F55.For straight lengths, light drawn and general purpose,maximum hardness 60 on Rockwell 30T scale.

Parts Carbon Steel

Forged Body

Bar Stock Body

Cold Formed Nut

Bar Stock Nut

Sleeve

JIS G4051

S20C-S48C

JIS G4051

S20C-S48C

JIS G4051

S10C-S20C

JIS G4051

S20C-S48C

JIS G4051

S10C

SUS316,SUS304

SUS316,SUS304

SUS316,SUS304

SUS316,SUS304

SUS316,SUS304

JIS H3250

C3771

JIS H3250

C3604

JIS H3250

C3604

JIS H3250

C3604

Stainless Steel Brass

Material

Temperature-40 to 120

(DIN 3859)

-60 to 400

(DIN 17440)-60 to 175

Carbon Steel

Pressure

(Kgf/cm2)

O.D

(mm)

4-15

16-22

25-28

30-38

40-50

500

400

350

250

210

250

210

170

150

120

Stainless Steel Brass

Fig.1

Fig.2


Bite Type Tube Fitting for JIS & KS

Assembly Instructions

Step 1. Cutting the tube :

Cut tube squarely and lightly de-burr the end

internally and externally.

Step 2. Sleeve placement :

Set a nut and sleeve on the tube. Make sure the

sleeve and the nut are facing the fitting.

Step 3. Lubrication :

Lightly lubricate threads on tool or body as well as

the tail and lead end of the sleeve with an extreme

friction lubricant.

Step 4. Pre-setting :

Insert tube end into tool or fitting until it bottoms

against the shoulder(to hold tube motionless

during pre-setting operation) and screw nut down

finger tight.

Step 5. Final setting :

Wrench nut down 1-1/2 turns to pre-set the sleeve

reliable make up of all flareless tube fittings is

dependent upon the sleeve traveling a prescribed

distance into the tapered fitting throat in order to

bite into the tube and effect a positive grip and seal.

Reassembly Instructions

Fitting can be used many times. To ensure this, parts must

be clean and free of defects.

Step 1. Insert the tube into fitting body until sleeve seats

firmly in the fitting and hand-tighten the nut.

Step 2. Tighten the nut with a wrench by holding the fitting

body with a backup wrench until a sharp rise in

torque is felt.

Further tighten the nut 1/4 to 1/2 turn.

Pre-Set Inspection

All SUPERLOK fitting presets must be disassembled

and inspected for proper sleeve pre-set before final

installation for service. The following detailed inspection

procedures must be followed regardless of the method used

to pre-set the sleeve to the tube. (See Fig.3)

1. A ridge of metal (A) has been raised above the tube

surface to a height of at least 50% of the thickness of the

sleeve leading edge, completely around the tube.

2. While the leading edge of the sleeve may be coined flat

(B) there is a slight bow to the balance of the pilot

section (C).

3. The tail or back end of the sleeve is snug against the

tube (D).

4. There is a slight indentation around the end of the tube

(E) that indicates the tube was bottomed in the tool or

fitting during pre-setting (if evidence of this complete

contact is not visible the sleeve may not be properly

pre-set).

5. Avoid rotating the sleeve. Steel sleeve should not be

capable of moving back and forth along the tube beyond

the bite area (a stainless steel sleeve will move more

than steel because of it's spring back characteristics).

Trouble Shooting Guide

Problems with bite type fittings are most of ten traced to

faulty Pre-Set/Assembly procedure.

1. Tube not bottomed

Remedy:Check for the indentation on the tubeend or compare the length from the endof the tube to the front end of the sleeveof a known good assembly to that of theassembly in question. This assemblyshould be scrapped.


: SUPERLOK Bite Type Fitting: Name of Fitting: Tube and Pipe Designations

Material Indication System

C = Carbon Steel316 = 316 Stainless Steel304 = 304 Stainless SteelB = Brass

Out dia.

Designation

Nominal dia.

Out dia.

Designation

4

04

1/8

10.5

6A

6

06

1/4

13.8

8A

8

08

3/8

17.3

10A

12......... 38

12......... 38

10

10

1/2

21.7

15A

3/4

27.2

20A

1

34.0

25A

40

40

1 1/4

42.7

32A

50

50

1 1/2

48.6

40A

MetricTube

SCH,

PIPE

Ordering Information

B M C 08 - 02 R

Example 1

B M C 08 - 02 R - B

Example

Brass

B U - 12

Example 2

: Pipe Thread Designations

Thread

Designation

2

16

1 1/2

12

1 1/4

10

1

08

3/4

06

1/2

04

3/8

03

1/4

02

1/8

01

: Thread Symbols

Type

Taper Threads

Parallel Threads

Specification

JIS B 0203(PT), ISO 7/1

ANSI B 1.20.1(NPT)

JIS B 0202(PF), ISO 228/1

Symbol

R

N

G

Remedy:

Inspect for turned up ridge of material.

A failure to achieve this ridge can be

traced either to the nut not being

tightened enough or the tube not being

bottomed against the stop which

allowed the tube to travel forward with

the sleeve. In some instances this

assembly may be re-worked.

2. Shallow bite

Remedy:

Too much pressure or more than 1-3/4

turns from finger tight were used to

pre-set sleeve, or the nut was severely

over-tightened in final assembly. This

assembly should be scrapped.

3. Over-set sleeve

Remedy:

The sleeve may become cocked on the

tube when the tube end is not properly

lined up with the body. Generally, this

condition is caused by faulty tube

bending. All bent tube assemblies

should drop into the fitting body prior to

make up. This assembly should be

scrapped.

4. Sleeve cocked on tube

Remedy:

If all of the prior checks have been

made and the sleeve still shows no sign

of biting the tube, it may be that the tube

is too hard. This assembly should be

scrapped.

5. No bite



BUE Union Elbow

BU Straight Union

BMRT Male Run Tee

BFC FemaleConnector

BBFC Bulkhead FemaleConnector

BGC Gauge Connector

BFEFemale Elbow

BFBTFemale Branch Tee

BFRT Female Run Tee

BCCap

BPPlug

BJJig

BNNut

BSSleeve

BHMUHose Male Union

BHFUHose Female Union

BHBMUHose BulkheadMale Union

BHBFU Hose BulkheadFemale Union

BHME HoseMale Elbow

BHFE Hose Female Elbow

BHBME Hose BulkheadMale Elbow

BHBFE Hose BulkheadFemale Elbow

BWCWelding Connector

BWBUWelding Bulkhead Union

BA-RAdapter

BA-GAdapter

BRReducer

BAEAdjustable Elbow

BABTAdjustable Branch Tee

BARTAdjustable Run Tee

BAPAir Purge Valve(Tube End)

BAP-RAir Purge Valve(Thread End)

6 16

17

17

18

18

19

19

20

20

21

22

22

23

23

24

24

25

25

26

26

27

27

28

28

29

29

30

30

31

31

6

BUT Union Tee

BUC Union Cross

BBHUBulkhead Union

BBUEBulkhead UnionElbow

BMC-RMale Connector

BMC-GMale Connector(For Copper Gasket)

BOMCMale Connector(For O-Ring)

BLMCLong Male Connector

BMEMale Elbow

BLMELongMale Elbow

BOMEO-Ring SealMale Elbow

BBEBanjo Elbow

BMBTMale Branch Tee

7

7

8

8

9

10

11

12

13

14

14

15

15


All dimensions in millimeters. Dimensions given approximate length with tightened nut.

35515254546161616363667172737985949410354606163717998103

203031313136363638383943434444465555603136363843445760

121417171924272730323641414646505555651722273241466065

121417192227303236364146465055606060751924323646556575

67777

7.57.58891010101111121212127

7.58910111212

2.5468101213141718202225262832323440811141822283440

BU-04BU-06BU-08BU-10BU-12BU-15BU-16BU-18BU-20BU-22BU-25BU-28BU-30BU-32BU-35BU-38BU-40BU-42BU-50BU-6ABU-8ABU-10ABU-15ABU-20ABU-25ABU-32ABU-40A

46810121516182022252830323538404250

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6

Part NumberTube O.D.

D

Dimension

d A H h I L

BUStraight Union

22.530.533.534.535.541.544.544.545.546.549.555

55.559.563.569.574.574.583.534.540

44.546.555

63.577.583.5

152023232429323233343641414546505555622328323441465762

121417171924272730323641414646505555651722273241466065

121417192227303236364146465055606060751924323646556575

67777

7.57.58891010101111121212127

7.58910111212

2.5468101213141718202225262832323440811141822283440

BUE-04BUE-06BUE-08BUE-10BUE-12BUE-15BUE-16BUE-18BUE-20BUE-22BUE-25BUE-28BUE-30BUE-32BUE-35BUE-38BUE-40BUE-42BUE-50BUE-6ABUE-8ABUE-10ABUE-15ABUE-20ABUE-25ABUE-32ABUE-40A

46810121516182022252830323538404250

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.0 1 1/4 42.71 1/2 48.6


D

Dimension

d A H h I L

BUEUnion Elbow




22.530.533.534.535.541.544.544.545.546.549.555

55.559.563.569.574.574.583.534.540

44.546.555

63.577.583.5

152023232429323233343641414546505555622328323441465762

121417171924272730323641414646505555651722273241466065

121417192227303236364146465055606060751924323646556575

67777

7.57.58891010101111121212127

7.58910111212

2.5468101213141718202225262832323440811141822283440

BUT-04BUT-06BUT-08BUT-10BUT-12BUT-15BUT-16BUT-18BUT-20BUT-22BUT-25BUT-28BUT-30BUT-32BUT-35BUT-38BUT-40BUT-42BUT-50BUT-6ABUT-8ABUT-10ABUT-15ABUT-20ABUT-25ABUT-32ABUT-40A

46810121516182022252830323538404250

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6


D

Dimension

d A H h I L

BUTUnion Tee

4681012131417202526

7777

7.57.588101011

1417192227303236414650

1717191927273030364646

2323242432323333364545

33.533.535.535.544.544.545.545.549.559.559.5

BUC-06BUC-08BUC-10BUC-12BUC-15BUC-16BUC-18BUC-20BUC-25BUC-30BUC-32

68101215161820253032


D

Dimension

d A H h I L

BUC

Union Cross



10.512.514.516.518.522.524.526.528.530.535.538.540.542.545.548.552.564.516.520.526.530.538.545.556.564.5

1313131313151515151515151515151515151315151515151515

32.542.542.543.543.549.549.551.551.551.552.555

55.557.560.564.569.571.543.549

51.551.555

60.570.571.5

21.529.529.531.531.534.536.536.536.537.538.542

42.544.547.550.556.564.531.534

36.537.542

47.560.564.5

2532323232373739393939414143434550503237393941435050

1419192020222424242525282830303137432022242528304043

1417192224273032323641464650505560702227323646506570

1214171922273032363641464650556060751924323646556575

67777

7.57.588910101011111212127

7.58910111212

2.54681012131417182022252628323240811141822283440

BBHU-04BBHU-06BBHU-08BBHU-10BBHU-12BBHU-15BBHU-16BBHU-18BBHU-20BBHU-22BBHU-25BBHU-28BBHU-30BBHU-32BBHU-35BBHU-38BBHU-40BBHU-50BBHU-6ABBHU-8ABBHU-10ABBHU-15ABBHU-20ABBHU-25ABBHU-32ABBHU-40A

468101215161820222528303235384050

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6


D

Dimension

NSL1LI1IhHAd

BBHUBulkhead Union

BBUE-06BBUE-08BBUE-10BBUE-12BBUE-15BBUE-16BBUE-18BBUE-20BBUE-22BBUE-25BBUE-28BBUE-30

12.514.516.518.522.524.526.528.530.535.538.540.5

131313131515151515151515

33.534.537.538.543.545.545.545.548.552.555

60.5

42.542.543.543.549.549.551.551.551.552.555

55.5

55.556.559.560.569.571.575.577.577.581.584

88.5

232426273133333336394146

454648495759636565687074

7777

7.57.5889101010

141719222730323636414646

171922242730323636414646

171922242730323236414146

468101213141718202225

6810121516182022252830

PartNumber

Tube O.D.D

Dimension

NSL2L1LI1IAHh1hd

BBUEBulkhead Union Elbow




PT 1/8PT 1/8PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/2PT 1/4PT 3/8PT 1/2PT 3/8PT 1/2PT 3/8PT 1/2PT 3/8PT 1/2PT 1/2PT 3/4PT 1/2PT 3/4PT 3/4PT 1PT 3/4PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 1 1/2

PT 2PT 1/8PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 3/4PT 3/4PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2

PT 2

25.534.537.535.537.538.539

42.538.539

42.543

45.543

45.543

45.547.548

47.5485052

52.554.555575760646969

76.536.538.542

42.543

45.547.548

52.554.55960727276

76.5

22283329333334393334393741374137414345434546494851515555555762627129333637374143454851525564646771

12141717171719221919242424272727273030323236364141414646465055556517172222272732324141464660606565

12141417171919192222222727303032323636363641414646464650556060607519192424323236364646555565657575

3.973.976.013.976.016.016.358.166.016.358.166.358.166.358.166.358.168.169.538.169.539.5310.399.5310.3910.3912.7012.7012.7012.7012.7012.7015.883.976.016.016.356.358.168.169.539.5310.3910.3912.7012.7012.7012.7015.88

67777777777

7.57.57.57.588889910101010101011111212121277

7.57.588991010111112121212

2.54446788791091291291212161216162016222225262832323440477991212161622222831343640

BMC04-01RBMC06-01RBMC06-02RBMC08-01RBMC08-02RBMC10-02RBMC10-03RBMC10-04RBMC12-02RBMC12-03RBMC12-04RBMC15-03RBMC15-04RBMC16-03RBMC16-04RBMC18-03RBMC18-04RBMC20-04RBMC20-06RBMC22-04RBMC22-06RBMC25-06RBMC25-08RBMC28-06RBMC28-08RBMC30-08RBMC30-10RBMC32-10RBMC35-10RBMC38-12RBMC40-12RBMC42-12RBMC50-16RBMC6A-01RBMC6A-02RBMC8A-02RBMC8A-03RBMC10A-03RBMC10A-04RBMC15A-04RBMC15A-06RBMC20A-06RBMC20A-08RBMC25A-08RBMC25A-10RBMC32A-10RBMC32A-12RBMC40A-12RBMC40A-16R

4668810101012121215151616181820202222252528283030323538404250

1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.01 1/4 42.71 1/4 42.71 1/2 48.61 1/2 48.6


D

Dimension

TLIhHBAd

BMC-RMale Connector



2.5444668681081212121612161620222225262832323440466881212161622222831343640

6777777777

7.57.57.58899101010101011111212121277

7.57.588991010111112121212

141418141818

21.518

21.525.521.525.525.525.531.525.531.531.5383838

48.548.548.553.553.553.566141818

21.521.525.525.531.531.53838

48.548.553.553.566

1214141717191922222227273032363636414146464650556060607519192424323236364646555565657575

1414191719192219222724272727323232364141415050505555557017192222272732324141465060606570

2328332833333433343937414141464346465052525757575862627329333636384143465052545763646573

881281212121212141214141416141616181818202020212121258121212121414161618182020212125

22.530.531.530.531.532.533.532.533.536.537.539.539.539.542.541.542.543.545.548

48.551.551.554.556.560.560.569.532.532.53636

38.539.541.542.54848

53.554.563.563.565.569.5

PF1/8PF1/8PF1/4PF1/8PF1/4PF1/4PF3/8PF1/4PF3/8PF1/2PF3/8PF1/2PF1/2PF1/2PF3/4PF1/2PF3/4PF3/4PF1PF1PF1

PF1 1/4PF1 1/4PF1 1/4PF1 1/2PF1 1/2PF1 1/2

PF2PF1/8PF1/4PF1/4PF3/8PF3/8PF1/2PF1/2PF3/4PF3/4PF1PF1

PF1 1/4PF1 1/4PF1 1/2PF1 1/2

PF2

BMC04-01GBMC06-01GBMC06-02GBMC08-01GBMC08-02GBMC10-02GBMC10-03GBMC12-02GBMC12-03GBMC12-04GBMC15-03GBMC15-04GBMC16-04GBMC18-04GBMC20-06GBMC22-04GBMC22-06GBMC25-06GBMC25-08GBMC28-08GBMC30-08GBMC30-10GBMC32-10GBMC35-10GBMC38-12GBMC40-12GBMC42-12GBMC50-16GBMC6A-01GBMC6A-02GBMC8A-02GBMC8A-03GBMC10A-03GBMC10A-04GBMC15A-04GBMC15A-06GBMC20A-06GBMC20A-08GBMC25A-08GBMC25A-10GBMC32A-10GBMC32A-12GBMC40A-12GBMC40A-16G

466881010121212151516182022222525283030323538404250

1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.01 1/4 42.71 1/4 42.71 1/2 48.61 1/2 48.6


D

Dimension

TLI1IhHBAd

BMC-GMale Connector(For CopperGasket)




2.5444668681081212121612161620222225262832323440466881212161622222831343640

6777777777

7.57.57.58899101010101011111212121277

7.57.588991010111112121212

1414191419192219222722272727362736364141415050505555557514191922222727363641415050555575

1214141717191922222227273032363636414146464650556060607519192424323236364646555565657575

1414191719192219222724272727363236364141415050505555557017192222272732364141465060606575

2328332833333433343937414141464346465052525757575862627329333636384143465052545763646573

881281212121212141214141416141616181818202020212121258121212121414161618182020212125

22.530.531.530.531.532.533.532.533.536.537.539.539.539.542.541.542.543.545.548

48.551.551.554.556.560.560.569.532.532.53636

38.539.541.542.54848

53.554.563.563.565.569.5

PF 1/8PF 1/8PF 1/4PF 1/8PF 1/4PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1PF 1PF 1

PF 1 1/4PF 1 1/4PF 1 1/4PF 1 1/2PF 1 1/2PF 1 1/2

PF 2PF 1/8PF 1/4PF 1/4PF 3/8PF 3/8PF 1/2PF 1/2PF 3/4PF 3/4PF 1PF 1

PF 1 1/4PF 1 1/4PF 1 1/2PF 1 1/2

PF 2

BOMC04-01GBOMC06-01GBOMC06-02GBOMC08-01GBOMC08-02GBOMC10-02GBOMC10-03GBOMC12-02GBOMC12-03GBOMC12-04GBOMC15-03GBOMC15-04GBOMC16-04GBOMC18-04GBOMC20-06GBOMC22-04GBOMC22-06GBOMC25-06GBOMC25-08GBOMC28-08GBOMC30-08GBOMC30-10GBOMC32-10GBOMC35-10GBOMC38-12GBOMC40-12GBOMC42-12GBOMC50-16GBOMC6A-01GBOMC6A-02GBOMC8A-02GBOMC8A-03GBOMC10A-03GBOMC10A-04GBOMC15A-04GBOMC15A-06GBOMC20A-06GBOMC20A-08GBOMC25A-08GBOMC25A-10GBOMC32A-10GBOMC32A-12GBOMC40A-12GBOMC40A-16G

466881010121212151516182022222525283030323538404250

1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.01 1/4 42.71 1/4 42.71 1/2 48.61 1/2 48.6


D

Dimension

TLI1IhHBAd

BOMCMale Connector(For O-Ring)



2.54678799121212161620222526799121622

6777777

7.57.57.5889101010117

7.588910

3.973.976.016.016.356.016.356.358.168.168.169.539.5310.3910.3912.7012.706.016.356.358.169.5310.39

10.510.51414

17.514

17.517.5222222

27.527.53434

42.542.514

17.517.522

27.534

1214171919222227273032363641464650192432323646

1214171719191924242727303236414646172227273241

46637071727172818686869293991041091107181818693104

30414546

46.546

46.552.5565656

58.559.563.566.568.569.546

52.552.556

59.566.5

49.569.574.576.577

76.57787

90.590.590.59596102

107.511111276.586.587

90.596

107.5

PT 1/8PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 1PT 1

PT 1 1/4PT 1 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 3/4PT 1

BLMC04-01RBLMC06-01RBLMC08-02RBLMC10-02RBLMC10-03RBLMC12-02RBLMC12-03RBLMC15-03RBLMC15-04RBLMC16-04RBLMC18-04RBLMC20-06RBLMC22-06RBLMC25-08RBLMC28-08RBLMC30-10RBLMC32-10RBLMC6A-02RBLMC8A-03RBLMC10A-03RBLMC15A-04RBLMC20A-06RBLMC25A-08R

4681010121215151618202225283032

1/8 10.51/4 13.83/8 17.33/8 17.31/2 21.73/4 27.2


D

Dimension

TLI1IhHCBAd

BLMCLong Male Connector




2.5446688810101012121313141417171818202022222525262832323440881111141418182222282834344040

447477912791291291291212161216162216222231313136363646477991212161622223131363646

67777777777

7.57.57.57.588889910101010101011111212121277

7.57.588991010111112121212

3.973.976.013.976.016.016.358.166.016.358.166.358.166.358.166.358.168.169.538.169.539.5310.399.5310.3910.3912.7012.7012.7012.7012.7012.7015.883.976.016.016.356.358.168.169.539.5310.3910.3912.7012.7012.7012.7015.88

12141417171919192222222727303032323636363641414646464650556060607519192424323236364646555565757575

12141717171719221919242424272727273030323236364141414646465055556517172222272732324141464660606565

15202323232324292424292929323232323333343436364141414646465055556223232828323234344141464657576262

22.530.533.533.533.534.535.540.535.535.540.541.541.544.544.544.544.545.545.546.546.549.549.55555

55.560.560.563.569.574.574.583.534.534.54040

44.544.546.546.55555

63.563.577.577.583.583.5

131417161819

19.52620

20.526

23.526

25.527

27.53032

30.532

32.533.535.537.539.539.542.543.545.548.549.549.558171922

22.527.53032

32.537.539.544.545.551.551.557.558

BME04-01RBME06-01RBME06-02RBME08-01RBME08-02RBME10-02RBME10-03RBME10-04RBME12-02RBME12-03RBME12-04RBME15-03RBME15-04RBME16-03RBME16-04RBME18-03RBME18-04RBME20-04RBME20-06RBME22-04RBME22-06RBME25-06RBME25-08RBME28-06RBME28-08RBME30-08RBME30-10RBME32-10RBME35-10RBME38-12RBME40-12RBME42-12RBME50-16RBME6A-01RBME6A-02RBME8A-02RBME8A-03RBME10A-03RBME10A-04RBME15A-04RBME15A-06RBME20A-06RBME20A-08RBME25A-08RBME25A-10RBME32A-10RBME32A-12RBME40A-12RBME40A-16R

4668810101012121215151616181820202222252528283030323538404250

1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.0

1 1/4 42.71 1/4 42.71 1/2 48.61 1/2 48.6


D

Dimension

TL1LIhHBAd1d

PT 1/8PT 1/8PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/2PT 1/4PT 3/8PT 1/2PT 3/8PT 1/2PT 3/8PT 1/2PT 3/8PT 1/2PT 1/2PT 3/4PT 1/2PT 3/4PT 3/4PT 1

PT 3/4PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 1 1/2

PT 2PT 1/8PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 3/4PT 3/4PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2

PT 2

BME Male Elbow



4681010121213141718202022252628

4777991212121616162222313131

77777

7.57.57.5889101010101111

3.976.016.016.016.356.358.168.168.169.539.539.5310.3910.3912.7012.7012.70

1417192222272730323636414146465055

1417171919242427273032363641464646

2023232424292932323334363641464646

30.533.534.535.535.541.541.544.544.545.546.549.549.955

60.560.563.5

3643465253

61.5677077

82.583.590.591.5104.5104.5104.5121.5

PT 1/8PT 1/4PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4

BLME 06-01RBLME 08-02RBLME 10-02RBLME 12-02RBLME 12-03RBLME 15-03RBLME 15-04RBLME 16-04RBLME 18-04RBLME 20-06RBLME 22-06RBLME 25-06RBLME 25-08RBLME 28-08RBLME 30-10RBLME 32-10RBLME 35-10R

68101212151516182022252528303235


D

Dimension

TL1LIhHBAd1d

BLMELong Male Elbow

4666912912121216161622222231313136

777777

7.57.57.58891010101010111112

1417192222222727303236364141464646505560

1419191922272227272736363641414150505055

1417171919242424243030323636414146464650

2023232424242929323233343636414144464650

1012121212161216161617171721212121212121

30.533.534.535.535.535.541.541.544.544.545.546.549.549.555

55.558.560.563.569.5

3034353636464046465252526062626666666673

PF 1/8PF 1/4PF 1/4PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 1/2PF 3/4PF 3/4PF 3/4PF 1PF 1PF 1

PF 1 1/4PF 1 1/4PF 1 1/4PF 1 1/2

4681010101212131417182020222525262832

BOME06-01GBOME08-02GBOME10-02GBOME12-02GBOME12-03GBOME12-04GBOME15-03GBOME15-04GBOME16-04GBOME18-04GBOME20-06GBOME22-06GBOME25-06GBOME25-08GBOME28-08GBOME30-08GBOME30-10GBOME32-10GBOME35-10GBOME38-12G

68101212121515161820222525283030323538

Part NumberTubeO.D.

D

Dimension

TL1LI1IhH1HAd1d

BOMEO-Ring Seal Male Elbow




2.5446688101012121314171820202225252628323240811141822283440

447477979912121216161622222231313136364679121622313646

677777777

7.57.57.5889101010101011111212127

7.58910111212

3.973.976.013.976.016.016.356.016.356.358.168.168.169.539.539.5310.3910.3910.3912.7012.7012.7012.7012.7015.886.016.358.169.5310.3912.7012.7015.88

121414171719192222272730323636414146464650556060751924323646556575

121417171717191919242427273032363641414646465055651722273241466065

152023232323242424292932323334363641414646465055622328323441465762

22.530.533.533.533.534.535.535.535.541.541.544.544.545.546.549.549.555

55.560.560.563.569.574.583.534.540

44.546.555

63.577.583.5

131417161819

19.518

20.523.5262730

30.532.533.535.539.539.542.543.545.548.549.55819

22.530

32.539.545.551.558

PT 1/8PT 1/8PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2

PT 2PT 1/4PT 3/8PT 1/2PT 3/4PT 1

PT 1 1/4PT 1 1/2

PT 2

BMBT04-01RBMBT06-01RBMBT06-02RBMBT08-01RBMBT08-02RBMBT10-02RBMBT10-03RBMBT12-02RBMBT12-03RBMBT15-03RBMBT15-04RBMBT16-04RBMBT18-04RBMBT20-06RBMBT22-06RBMBT25-06RBMBT25-08RBMBT28-08RBMBT30-08RBMBT30-10RBMBT32-10RBMBT35-10RBMBT38-12RBMBT40-12RBMBT50-16RBMBT6A-02RBMBT8A-03RBMBT10A-04RBMBT15A-06RBMBT20A-08RBMBT25A-10RBMBT32A-12RBMBT40A-16R

466881010121215151618202225252830303235384050

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.0

1 1/4 42.71 1/2 48.6


D

Dimension

TL1LIhHBAd1d

BMBTMale Branch Tee

P10P12P12P18P22P22P22P28P28P36P36P12P18P22P28P36

PF1/8PF1/4PF1/4PF3/8PF1/2PF1/2PF1/2PF3/4PF3/4PF1PF1

PF1/4PF3/8PF1/2PF3/4PF1

BBE06-01GBBE08-02GBBE10-02GBBE12-03GBBE15-04GBBE16-04GBBE18-04GBBE20-06GBBE22-06GBBE25-08GBBE28-08GBBE6A-02GBBE8A-03GBBE10A-04GBBE15A-06GBBE20A-08G

68101215161820222528

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.2

4681012131417182022811141822

47791212121616222279121622

7777

7.57.588910107

7.58910

141818

21.525.525.525.531.531.5383818

21.525.531.538

14171922273032363641461924323646

17222227303030414150502227304150

17222227363636414250502227364150

23252529363636383842422529363842

8121212141414161618181212141618

33.535.536.540.548.548.548.550.550.555.556

36.541

48.550.556

13161619242424282837371619242837

14171722282828323238381722283238

PartNumber

TubeO.D.

D

Dimension

d d1 A B H H1 h I I1 L L1 L2 O-Ring T

BBEBanjo Elbow



2.5446688101012121314171820202225252628323240811141822283440

447477979912121216161622222231313136364679121622313646

677777777

7.57.57.5889101010101011111212127

7.58910111212

3.973.976.013.976.016.016.356.016.356.358.168.168.169.539.539.5310.3910.3910.3912.7012.7012.7012.7012.7015.886.016.358.169.5310.3912.7012.7015.88

121414171719192222272730323636414146464650556060751924323646556575

121417171717191919242427273032363641414646465055651722273241466065

152023232323242424292932323334363641414646465055622328323441465762

22.530.533.533.533.534.535.535.535.541.541.544.544.545.546.549.549.555

55.560.560.563.569.574.583.534.540

44.546.555

63.577.583.5

131417161819

19.518

20.523.5262730

30.532.533.535.539.539.542.543.545.548.549.55819

22.530

32.539.545.551.558

PT 1/8PT 1/8PT 1/4PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2

PT 2PT 1/4PT 3/8PT 1/2PT 3/4PT 1

PT 1 1/4PT 1 1/2

PT 2

BMRT04-01RBMRT06-01RBMRT06-02RBMRT08-01RBMRT08-02RBMRT10-02RBMRT10-03RBMRT12-02RBMRT12-03RBMRT15-03RBMRT15-04RBMRT16-04RBMRT18-04RBMRT20-06RBMRT22-06RBMRT25-06RBMRT25-08RBMRT28-08RBMRT30-08RBMRT30-10RBMRT32-10RBMRT35-10RBMRT38-12RBMRT40-12RBMRT50-16RBMRT6A-02RBMRT8A-03RBMRT10A-04RBMRT15A-06RBMRT20A-08RBMRT25A-10RBMRT32A-12RBMRT40A-16R

466881010121215151618202225252830303235384050

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6


D

Dimension

TL1LIhHBAd1d

BMRTMale Run Tee




PT 1/8PT 1/4PT 1/4PT 3/8PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2PT 1 1/2

PT 2PT 1/4PT 3/8PT 1/2PT 3/4PT 1

PT 1 1/4PT 1 1/2

PT 2

35.540.541.543.541.543.546.551.551.551.553.553.554.558.561

61.565.565.568.570.574.574.581.541.546

51.553.561

68.578.581.5

25303032303234393939414141454747515151515555603034394147515560

17191924192424303030363636464646555555656565801924303646556580

14171919222227273032363641414646465055606060751924323646556575

777777

7.57.57.588910101010101111121212127

7.58910111212

468810101212131417182020222525262832323440811141822283440

BFC06-01RBFC08-02RBFC10-02RBFC10-03RBFC12-02RBFC12-03RBFC15-03RBFC15-04RBFC16-04RBFC18-04RBFC20-06RBFC22-06RBFC25-06RBFC25-08RBFC28-08RBFC30-08RBFC30-10RBFC32-10RBFC35-10RBFC38-12RBFC40-12RBFC42-12RBFC50-16RBFC6A-02RBFC8A-03RBFC10A-04RBFC15A-06RBFC20A-08RBFC25A-10RBFC32A-12RBFC40A-16R

68101012121515161820222525283030323538404250

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6


D

Dimension

TLIH1HAd

BFCFemale Connector

BBFC06-01RBBFC08-02RBBFC10-02RBBFC10-03RBBFC12-02RBBFC12-03RBBFC15-03RBBFC15-04RBBFC16-04RBBFC18-04RBBFC20-06RBBFC22-06RBBFC25-06RBBFC25-08RBBFC28-08RBBFC30-08RBBFC30-10RBBFC32-10R


PT 1 1/4PT 1 1/4

12.514.516.516.518.518.522.522.524.526.528.530.535.535.538.540.540.542.5

131313131313151515151515151515151515

42.542.543.543.543.543.549.549.549.551.551.551.552.552.555

55.555.557.5

323232323232373737393939393941414143

131818201820202525252727273131313535

171922222424272730323236414146464646

171919241924243030303636414646465555

141719192222272730323636414146464650

777777

7.57.57.5889101010101011

46881010121213141718202022252526

6810101212151516182022252528303032

Part Number

Tube O.D.D

Dimension

TNSLI1IH2H1HAd

BBFCBulkhead FemaleConnector



BGC04-02GBGC04-03GBGC06-02GBGC06-03GBGC06-04GBGC08-02GBGC08-03GBGC08-04GBGC10-02GBGC10-03GBGC10-04GBGC12-02GBGC12-03GBGC12-04G

44666888101010121212

1415141516141516141516141516

66777777777777

1212141414171717191919222222

1924192430192430192430192430

2930323436323436323436323436

36.537.542.544.546.542.544.546.543.545.547.543.545.547.5

PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2


Da A H h I L T

BFE08-02RBFE10-02RBFE12-02RBFE12-03RBFE15-03RBFE15-04RBFE16-04RBFE18-04RBFE20-06RBFE22-06RBFE25-06RBFE25-08RBFE28-08RBFE30-10RBFE32-10RBFE35-10R

8101212151516182022252528303235

PT 1/4PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4

24242429293333333636364646555555

34.535.535.540.541.545.545.545.548.548.549.559.560

69.569.572.5

24242429293333333636364646555555

19191924243030303636364646555555

17192222272730323636414146465055

7777

7.57.57.5889101010101111

681010121213141718202022252628


DTL1LIhHAd

BGCGauge Connector

BFEFemale Elbow




BFBT08-02RBFBT10-02RBFBT12-02RBFBT12-03RBFBT15-03RBFBT15-04RBFBT16-04RBFBT18-04RBFBT20-06RBFBT22-06RBFBT25-06RBFBT25-08RBFBT28-08RBFBT30-08RBFBT30-10RBFBT32-10RBFBT35-10RBFBT6A-02RBFBT8A-03RBFBT10A-04RBFBT15A-06RBFBT20A-08RBFBT25A-10R

810121215151618202225252830303235

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.0

6810101212131417182020222525262881114182228

7777

7.57.57.5889101010101011117

7.5891011

1719222227273032363641414646465055192432364655

1919192424303030363636464646555555192430364655

2424242929333333363636464646555555242933364655

34.535.535.540.541.545.545.545.548.548.549.559.560

60.569.569.572.535.541

45.548.560

72.5

2424242929333333363636464646555555242933364655

PT 1/4PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4PT 1/4PT 3/8PT 1/2PT 3/4PT 1

PT 1 1/4


DTL1LIhHAd

BFBTFemale Branch Tee

BFRT08-02RBFRT10-02RBFRT12-02RBFRT12-03RBFRT15-03RBFRT15-04RBFRT16-04RBFRT18-04RBFRT20-06RBFRT22-06RBFRT25-06RBFRT25-08RBFRT28-08RBFRT30-08RBFRT30-10RBFRT32-10RBFRT35-10RBFRT6A-02RBFRT8A-03RBFRT10A-04RBFRT15A-06RBFRT20A-08RBFRT25A-10R

810121215151618202225252830303235

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.0

6810101212131417182020222525262881114182228

7777

7.57.57.5889101010101011117

7.5891011

1719222227273032363641414646465055192432364655

1919192424303030363636464646555555192430364655

2424242929333333363636464646555555242933364655

34.535.535.540.541.545.545.545.548.548.549.559.560

60.569.569.572.535.541

45.548.560

72.5

2424242929333333363636464646555555242933364655

PT 1/4PT 1/4PT 1/4PT 3/8PT 3/8PT 1/2PT 1/2PT 1/2PT 3/4PT 3/4PT 3/4PT 1PT 1PT 1

PT 1 1/4PT 1 1/4PT 1 1/4PT 1/4PT 3/8PT 1/2PT 3/4PT 1

PT 1 1/4


DTL1LIhHAd

BFRTFemale Run Tee



BC-06BC-08BC-10BC-12BC-15BC-16BC-18BC-20BC-22BC-25BC-28BC-30BC-32

28.529.531.531.534.536.536.536.537.538.542

42.544.5

18192020222424242525282830

14171719242727303236414146

14171922273032363641464650

7777

7.57.588910101011

681012151618202225283032


DLIhHA

BCCap

BP-06BP-08BP-10BP-12BP-15BP-16BP-18BP-20BP-22BP-25BP-28BP-30BP-32

681012151618202225283032

91113151819212325

28.531.533.535.5

81012141718202224

27.430.432.434.4

13.513.514.514.51616

17.517.517.519192020


DA d L

BPPlug




BJ-06BJ-08BJ-10BJ-12BJ-15BJ-16BJ-18BJ-20BJ-22BJ-25BJ-28BJ-30BJ-32BJ-35BJ-38BJ-40BJ-42BJ-50BJ-6ABJ-8ABJ-10ABJ-15ABJ-20ABJ-25ABJ-32ABJ-40A

6810121516182022252830323538404250

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6

1717172727272741414141415555555555651727274141556565

4040404040404040404040404040505050504040404040405050

M12 X 1.5M14 X 1.5M16 X 1.5 M18 X 1.5M22 X 1.5M24 X 1.5M26 X 1.5M28 X 1.5M30 X 1.5M35 X 1.5M38 X 1.5M40 X 1.5M42 X 1.5M45 X 1.5M48 X 1.5M52 X 2M52 X 2M64 X 2

M16 X 1.5M20 X 1.5M26 X 1.5M30 X 1.5M38 X 1.5M45 X 1.5M56 X 2M64 X 2


DH L T

BJJig



BN-04BN-06BN-08BN-10BN-12BN-15BN-16BN-18BN-20BN-22BN-25BN-28BN-30BN-32BN-35BN-38BN-40BN-42BN-50BN-6ABN-8ABN-10ABN-15ABN-20ABN-25ABN-32ABN-40A

46810121516182022252830323538404250

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6

121417192227303236364146465055606060751924323646556575

10.5151516161919191919202122222527

29.529.531.5161819192125

30.531.5

M10X1.25M12X1.5M14X1.5M16X1.5M18X1.5M22X1.5M24X1.5M26X1.5M28X1.5M30X1.5M35X1.5M38X1.5M40X1.5M42X1.5M45X1.5M48X1.5M52X2M52X2M64X2

M16X1.5M20X1.5M26X1.5M30X1.5M38X1.5M45X1.5M56X2M64X2


DH L T

BNNut

BS-04BS-06BS-08BS-10BS-12BS-15BS-16BS-18BS-20BS-22BS-25BS-28BS-30BS-32

4681012151618202225283032

7991010101010101011111111

BS-35BS-38BS-40BS-42BS-50BS-6ABS-8ABS-10ABS-15ABS-20ABS-25ABS-30ABS-40A

3538404250

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6

14141414141010101011141414


DL Part Number

Tube O.D.D

L

BSSleeve




BHMU08-02GBHMU08-03GBHMU10-02GBHMU10-03GBHMU10-04GBHMU12-02GBHMU12-03GBHMU12-04GBHMU15-03GBHMU15-04GBHMU16-03GBHMU16-04GBHMU18-04GBHMU20-06GBHMU22-04GBHMU22-06GBHMU25-06GBHMU25-08GBHMU28-06GBHMU28-08GBHMU30-06GBHMU30-08GBHMU32-08GBHMU32-10G

8810101012121215151616182022222525282830303232

PF 1/4PF 3/8PF 1/4PF 3/8PF 1/2PF 1/4PF 3/8PF 1/2PF 3/8PF 1/2PF 3/8PF 1/2PF 1/2PF 3/4PF 1/2PF 3/4PF 3/4PF 1

PF 3/4PF 1

PF 3/4PF 1PF 1

PF 1 1/4

45.547.546.548.551.546.548.551.552.554.552.554.554.558.556.558.560.562.56365

63.565.566.570.5

353735374035374040424042424644464749495149515256

171917192219192224242727273032323636414141414646

171719191922222227273030323636364141464646465050

77777777

7.57.57.57.588991010101010101111

666886910912912121612161620162216222228

Part Number Tube O.D.D

d A H h I L T

BHMUHose Male Union

BHFU08-02GBHFU08-03GBHFU10-02GBHFU10-03GBHFU10-04GBHFU12-02GBHFU12-03GBHFU12-04GBHFU15-03GBHFU15-04GBHFU16-03GBHFU16-04GBHFU18-04GBHFU20-06GBHFU22-04GBHFU22-06GBHFU25-06GBHFU25-08GBHFU28-06GBHFU28-08GBHFU30-06GBHFU30-08GBHFU32-08GBHFU32-10GBHFU38-12GBHFU40-12GBHFU50-16G

8810101012121215151616182022222525282830303232384050


PF 3/4PF 1

PF 3/4PF 1PF 1

PF 1 1/4PF 1 1/2PF 1 1/2

PF 2

43.544.544.545.549.544.545.549.549.552.549.552.552.555.554.555.557.559.56062

60.562.563.569.576.581.591.5

333433343833343837403740404342434446464846484955576270

171917192219192224242727273032323636414141414646505565

171719191922222227273030323636364141464646465050606075

77777777

7.57.57.57.588991010101010101111121212

666886910912912121612161620162216222228323240

Part Number Tube O.D.D

d A H h I L T

BHFUHose Female Union




PF 3/4PF 1

PF 3/4PF 1PF 1

PF 1 1/4

131313131313131315151515151515151515151515151515

14.514.516.516.516.518.518.518.522.522.524.524.526.528.530.530.535.535.538.538.540.540.542.542.5

42.542.543.543.543.543.543.543.549.549.549.549.551.551.551.551.552.552.55555

55.555.557.557.5

65.567.567.569.571.567.569.571.575.577.577.579.581.583.582.584.587.589.58991

89.591.595.599.5

323232323232323237373737393939393939414141414343

232524262824262826282830303231333335343634363842

191922222224242427273030323236364141464646465050

171719191922222227273030323636364141464646465050

77777777

7.57.57.57.588991010101010101111

666886910912912121612161620162216222228

8810101012121215151616182022222525282830303232

BHBMU08-02GBHBMU08-03GBHBMU10-02GBHBMU10-03GBHBMU10-04GBHBMU12-02GBHBMU12-03GBHBMU12-04GBHBMU15-03GBHBMU15-04GBHBMU16-03GBHBMU16-04GBHBMU18-04GBHBMU20-06GBHBMU22-04GBHBMU22-06GBHBMU25-06GBHBMU25-08GBHBMU28-06GBHBMU28-08GBHBMU30-06GBHBMU30-08GBHBMU32-08GBHBMU32-10G

Part NumberMax. PanelThickness

S

PanelHole

Drill SizeL1LI1IhHAd

TubeO.D.

DT

BHBMUHose BulkheadMale Union


PF 3/4PF 1

PF3 /4PF 1PF 1

PF 1 1/4PF 1 1/2PF 1 1/2

PF 2

131313131313131315151515151515151515151515151515151515

14.514.516.516.516.518.518.518.522.522.524.524.526.528.530.530.535.535.538.538.540.540.542.542.548.552.564.5

42.542.543.543.543.543.543.543.549.549.549.549.551.551.551.551.552.552.55555

55.555.557.557.564.569.571.5

63.564.565.566.569.565.566.569.572.575.574.577.579.580.580.581.582.584.58688

86.588.592.598.5106.5113.5124.5

323232323232323237373737393939393939414141414343455050

212222232622232623262528282929303032313331333541424453

191922222224242427273030323236364141464646465050556070

171719191922222227273030323636364141464646465050606075

77777777

7.57.57.57.588991010101010101111121212

666886910912912121612161620162216222228313240

8810101012121215151616182022222525282830303232384050

BHBFU08-02GBHBFU08-03GBHBFU10-02GBHBFU10-03GBHBFU10-04GBHBFU12-02GBHBFU12-03GBHBFU12-04GBHBFU15-03GBHBFU15-04GBHBFU16-03GBHBFU16-04GBHBFU18-04GBHBFU20-06GBHBFU22-04GBHBFU22-06GBHBFU25-06GBHBFU25-08GBHBFU28-06GBHBFU28-08GBHBFU30-06GBHBFU30-08GBHBFU32-08GBHBFU32-10GBHBFU38-12GBHBFU40-12GBHBFU50-16G


S

PanelHole

Drill SizeL1LI1IhHAd

TubeO.D.

DT

BHBFUHose BulkheadFemale Union





PF 3/4PF 1

PF 3/4PF 1PF 1

PF 1 1/4

252828283428283433343638384140424446474947495456

33.534.535.535.540.535.535.540.541.541.544.544.544.545.546.546.549.549.55555

55.555.560.560.5

232424242924242929293232323334343636414141414646

171919192419192424242727273032323636414141414646

171719191922222227273030323636364141464646465050

77777777

7.57.57.57.588991010101010101111

6969126912912912121612161620162216222228

6688810101012121313141718182020222225252626

8810101012121215151616182022222525282830303232

BHME08-02GBHME08-03GBHME10-02GBHME10-03GBHME10-04GBHME12-02GBHME12-03GBHME12-04GBHME15-03GBHME15-04GBHME16-03GBHME16-04GBHME18-04GBHME20-06GBHME22-04GBHME22-06GBHME25-06GBHME25-08GBHME28-06GBHME28-08GBHME30-06GBHME30-08GBHME32-08GBHME32-10G

Part NumberTubeO.D.

Dd d1 A H h I L L1 T

TubeO.D.

Dd d1 A H h I L L1 T


PF 3/4PF 1

PF 3/4PF 1PF 1

PF 1 1/4PF 1 1/2PF 1 1/2

PF 2

252726273326273330333336363838394143444644465157616272

33.534.535.535.540.535.535.540.541.541.544.544.544.545.546.546.549.549.55555

55.555.560.560.569.574.583.5

232424242924242929293232323334343636414141414646505562

171919192419192424242727273032323636414141414646505565

171719191922222227273030323636364141464646465050606075

77777777

7.57.57.57.588991010101010101111121212

6969126912912912121612161620162216222228343446

6688810101012121313141718182020222225252626323240

8810101012121215151616182022222525282830303232384050

BHFE08-02GBHFE08-03GBHFE10-02GBHFE10-03GBHFE10-04GBHFE12-02GBHFE12-03GBHFE12-04GBHFE15-03GBHFE15-04GBHFE16-03GBHFE16-04GBHFE18-04GBHFE20-06GBHFE22-04GBHFE22-06GBHFE25-06GBHFE25-08GBHFE28-06GBHFE28-08GBHFE30-06GBHFE30-08GBHFE32-08GBHFE32-10GBHFE38-12GBHFE40-12GBHFE50-16G

BHMEHoseMale Elbow

Part Number T

BHFEHose Female Elbow




PF 3/4PF 1

PF 3/4PF 1

13131313131313131515151515151515151515151515

14.514.516.516.516.518.518.518.522.522.524.524.526.528.530.530.535.535.538.538.540.540.5

881010101212121515161618202222252528283030

668881010101212131314161818202022222525

696912691291291212161216162016221622

77777777

7.57.57.57.58899101010101010

17171919192222222727303032363638414146464646

19192222222424242727303032323636414146464646

19192222242424242727303032323636414146464646

46464848494949495757595963656565686874747474

42.542.543.543.543.543.543.543.549.549.549.549.551.551.551.551.552.552.55555

55.555.5

56.556.559.559.560.560.560.560.569.569.571.571.575.577.577.577.581.581.58888

88.588.5

28302830353133353637373839404040434348484848

BHBME08-02GBHBME08-03GBHBME10-02GBHBME10-03GBHBME10-04GBHBME12-02GBHBME12-03GBHBME12-04GBHBME15-03GBHBME15-04GBHBME16-03GBHBME16-04GBHBME18-04GBHBME20-06GBHBME22-04GBHBME22-06GBHBME25-06GBHBME25-08GBHBME28-06GBHBME28-08GBHBME30-06GBHBME30-08G


S

PanelHole

Drill SizeL1

TubeO.D.

DTLI1IhH1HAd1d

BHBMEHose BulkheadMale Elbow


PF 3/4PF 1

PF 3/4PF 1

13131313131313131515151515151515151515151515

14.514.516.516.516.518.518.518.522.522.524.524.526.528.530.530.535.535.538.538.540.540.5

881010101212121515161618202222252528283030

668881010101212131314161818202022222525

696912691291291212161216162016221622

77777777

7.57.57.57.58899101010101010

17171919192222222727303032363636414146464646

19192222222424242727303032323636414146464646

19192222242424242727303032323636414146464646

46464848494949495757595963656565686874747474

42.542.543.543.543.543.543.543.549.549.549.549.551.551.551.551.552.552.55555

55.555.5

56.556.559.559.560.560.560.560.569.569.571.571.575.577.577.577.581.581.58888

88.588.5

26272829333030333336343737404040434348484848

BHBFE08-02GBHBFE08-03GBHBFE10-02GBHBFE10-03GBHBFE10-04GBHBFE12-02GBHBFE12-03GBHBFE12-04GBHBFE15-03GBHBFE15-04GBHBFE16-03GBHBFE16-04GBHBFE18-04GBHBFE20-06GBHBFE22-04GBHBFE22-06GBHBFE25-06GBHBFE25-08GBHBFE28-06GBHBFE28-08GBHBFE30-06GBHBFE30-08G


S

PanelHole

Drill SizeL1

TubeO.D.

DTLI1IhH1HAd1d

BHBFEHose BulkheadFemale Elbow




BWC-06BWC-08BWC-10BWC-12BWC-15BWC-16BWC-18BWC-20BWC-22BWC-25BWC-28BWC-30BWC-32BWC-35BWC-38BWC-40BWC-50BWC-6ABWC-8ABWC-10ABWC-15ABWC-20ABWC-25ABWC-32ABWC-40A

68101215161820222528303235384050

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6

12141618212225282833363940434546571619242833404755

4681012131417182022252628323240811141822283440

7777

7.57.588910101011111212127

7.58910111212

14171922273032363641464650556060751924323646556575

14171719242727303236414146465055651722273241466065

29343434404444464651555556565865703440444652566570

11151515182222222226282828282830301518222225282830

39.544.545.545.552.556.556.558.558.564.569

69.570.573.577.584.591.545.552

56.558.566

73.585.591.5


DLI1IhHAdD1

BWCWeldingConnector

4681012131417182022252628323240811141822283440

7777

7.57.588910101011111212127

7.58910111212

14171922273032363641464650556060751924323646556575

16161920252828323238394646465555651922283239465865

74747474787878787878828282828290907478787882829090

9595979710310310310310310511011111111712112913397102103103110117131133

BWBU-06BWBU-08BWBU-10BWBU-12BWBU-15BWBU-16BWBU-18BWBU-20BWBU-22BWBU-25BWBU-28BWBU-30BWBU-32BWBU-35BWBU-38BWBU-40BWBU-50BWBU-6ABWBU-8ABWBU-10ABWBU-15ABWBU-20ABWBU-25ABWBU-32ABWBU-40A

68101215161820222528303235384050

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6


Dd A H D1 I L

BWBUWelding BulkheadUnion



6810101212151516182022252528303032384050

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6

3566788101112141416171820202226283469111418232933

3.976.016.016.356.016.356.358.168.168.169.539.539.5310.3910.3910.3912.7012.7012.7012.7015.886.016.358.169.5310.3912.7012.7015.88

323536

36.537

37.540.5434343

46.547.549.552.552.553.55556

64.5647236

38.543

47.552.5596772

677777888810101011111112121414207881011121720

2020212122222424242425262828282929303636372122242628333637

1214141914191922222227272736363646465050651419222736465065


PT 1 1/4PT 1 1/4PT 1 1/2PT 1 1/2

PT 2PT 1/4PT 3/8PT 1/2PT 3/4PT 1

PT 1 1/4PT 1 1/2

PT 2


DTLI1IhAd

BA06-01RBA08-02RBA10-02RBA10-03RBA12-02RBA12-03RBA15-03RBA15-04RBA16-04RBA18-04RBA20-06RBA22-06RBA25-06RBA25-08RBA28-08RBA30-08RBA30-10RBA32-10RBA38-12RBA40-12RBA50-16RBA6A-02RBA8A-03RBA10A-04RBA15A-06RBA20A-08RBA25A-10RBA32A-12RBA40A-16R

BA-RAdapter

PF 1/8PF 1/4PF 1/4PF 3/8PF 1/4PF 3/8PF 3/8PF 1/2PF 1/2PF 1/2PF 3/4PF 3/4PF 3/4PF 1PF 1PF 1

PF 1 1/4PF 1 1/4PF 1 1/2PF 1 1/2

PF 2PF 1/4PF 3/8PF 1/2PF 3/4PF 1

PF 1 1/4PF 1 1/2

PF 2

812121212121214141416161618181820202121241212141618202124

89910910101313131616161818212121212128910131618212328

2020212122222424242425262828282929303636372122242628333637

1419192219222227272732323241414150505555701922273241505570

141818

21.518

21.521.525.525.525.531.531.531.5383838

48.548.553.553.56618

21.525.531.538

48.553.566

3566788101112141416171820202226283469111418232933

BA06-01GBA08-02GBA10-02GBA10-03GBA12-02GBA12-03GBA15-03GBA15-04GBA16-04GBA18-04GBA20-06GBA22-06GBA25-06GBA25-08GBA28-08GBA30-08GBA30-10GBA32-10GBA38-12GBA40-12GBA50-16GBA6A-02GBA8A-03GBA10A-04GBA15A-06GBA20A-08GBA25A-10GBA32A-12GBA40A-16G

6810101212151516182022252528303032384050

1/8 10.51/4 13.83/8 17.31/2 21.73/4 27.21 34.01 1/4 42.71 1/2 48.6

Part Number Tube O.D. (D) d A h I I1 I2 T

BA-GAdapter




BR08-06BR10-06BR10-08BR12-06BR12-08BR12-10BR15-08BR15-10BR16-06BR16-10BR16-12BR18-10BR18-15BR20-06BR20-12BR20-16BR22-15BR22-18BR25-16BR25-20BR28-18BR28-22BR30-20BR30-25BR32-25BR35-22BR35-28BR28-25BR38-30BR8A-6ABR10A-6ABR10A8ABR15A-8ABR15A-10ABR20A-10ABR20A-15ABR25A-20ABR32A-25A

810101212121515161616181820202022222525282830303235353838

1/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.23/4 27.21 34.01 34.0

66868108106101210156121615181620182220252522282530

1/8 10.51/8 10.51/4 13.81/4 13.83/8 17.33/8 17.31/2 21.71/2 21.73/4 27.2

777777777777

7.577

7.57.58

7.588981010910101077

7.57.5889910

1414171417191719141922192714223027323036323636414136464146191924243232363646

1414171417171717171719192422222724272730303232363636414141171922242730323641

3940404141414343434343444545454748485052525253545558606163414446484852525860

44646868481081241013121413171418172020182220258811111414181822

49.550.550.551.551.552.553.554.553.554.554.555.557.555.556.559.560.560.562.564.564.564.565.567.568.570.574

74.577.552.555.55860

60.564.564.570.574


LIhHAdD1 D

BRReducer

Tube O.D.D

d d1 A H h I I1 L

101215161820222528303238

81012131417182022252632

6810111214141718202226

77

7.57.58891010101112

192227303236364146465060

171924272730323641414650

232429323233343641415050

212224242425262828293036

34.535.544.544.544.545.546.549.555

55.564.569.5

353740434345464953546672

BAE-10BAE-12BAE-15BAE-16BAE-18BAE-20BAE-22BAE-25BAE-28BAE-30BAE-32BAE-38

Part Number L1

BAEAdjustable Elbow



Adjustable Branch Tee

3537434343454649

34.535.544.544.544.545.546.549.5

2122242424252628

2324323232333436

1719242727303236

1922273032363641

77

7.57.588910

68101112141417

810121314171820

1012151618202225

BABT-10BABT-12BABT-15BABT-16BABT-18BABT-20BABT-22BABT-25

Part Number L1LI1IhHAd1dTube O.D.D

BABT

Adjustable Run Tee

3537434343454649

34.535.544.544.544.545.546.549.5

2122242424252628

2324323232333436

1719242727303236

1922273032363641

77

7.57.588910

68101112141417

810121314171820

1012151618202225

BART-10BART-12BART-15BART-16BART-18BART-20BART-22BART-25

Part Number L1LI1IhHAd1dTube O.D.D

BART




Air Purge Valve (Tube End)

7/327/327/327/325/165/165/165/165/165/165/167/325/165/165/165/16

56565758747474757678785772747679

13131313191919191919191319191919

14141414272727272727301427272730

3333444444434444

4444666666646666

68101215161820222528

10.513.817.321.727.2

BAP-06BAP-08BAP-10BAP-12BAP-15BAP-16BAP-18BAP-20BAP-22BAP-25BAP-28BAP-6ABAP-8ABAP-10ABAP-15ABAP-20A

Part NumberD E d H H1 L Ball

Dimension

4466

3344

14141927

13131319

51535469

7/327/327/325/16

PT 1/8PT 1/4PT 3/8PT 1/2

BAP-01RBAP-02RBAP-03RBAP-04R

Part NumberD d H H1 L Ball T

Dimension

BAP

Air Purge Valve (Thread End)

BAP-R


MATERIAL COMPARISON LIST

163

0.60~0.90

0.60~0.90

0.50~0.80

0.030MAX.

0.040MAX.

0.045MAX.

0.035MAX.

0.050MAX.

0.045MAX.

58(MIN.)

56

60(MIN.)

35(MIN.)

49

34(MIN.)

20(MIN.)

15

18(MIN.)

167~229Normalizing

206(MIN.)Normalizing

0.42~0.48

0.43~0.50

0.42~0.50

0.15~0.35

0.10~0.20

0.15~0.35

JIS G4051 S45C

AISI 1045 & SAE 1045

DIN 1652 C45

Material Tensilestrength(kg/mm2)

Yield point(kg/mm2)

Elongation(%)

HardnessSPMnSiC

Chemical Compositions(%) Mechanical Properties

APPLICABLE TUBE LISTSelection from those listed below is recommended.

4

6

8

10

12

15

16

18

20

22

25

28

30

35

38

42

50

TubeThicknessTolerance

0.50.1

1.00.15

1.50.2

2.00.2

2.50.25

3.00.3

3.00.33

3.50.35

4.00.4

4.50.45

5.00.5

5.50.55

6.00.6

7.00.7

8.0 9.0

OutsideDiameter

Tolerance

0.1

0.15

0.2

Note : 1. The area enclosed by thick line indicates the specified range of tube thickness against the outer diameters. (JOHS-102-1964)

2. Without for some particular reasons, it is recommended to use thickness indicated by O mark.



CARBON STEEL TUBING JAPANESE STANDARDS

< 0.25

0.10~0.35

0.30~1.10

< 0.035

< 0.035

0 < 0.30

0.10~0.35

0.30~1.40

< 0.035

< 0.035

0.08~0.18

0.10~0.35

0.30~0.60

< 0.035

< 0.035

< 0.20

< 0.20

< 0.35

0.25~0.60

< 0.040

< 0.040

0.08~0.18

0.10~0.35

0.30~0.60

< 0.035

< 0.035

< 0.20

< 0.20

< 0.035

0.25~0.60

< 0.040

< 0.040

0.10 < 22

28~35 0.15

42~50 0.20

0.10 2.0

0.5 20%

1.0~1.5 15%

10% > 2.0

1.0 0.15

1.5 0.20

10% > 2.0

1.0 0.15

1.5 0.20

10% > 2.0

Under 2mm :0.2mm

2mm or Over :10%

Under 2mm :0.2mm

2mm or Over :10%

< 6000+10-0

> 6000+15-0

< 6000+10-0

> 6000+15-0

< 6000+10-0

> 6000+15-0

< 6000+10-0

> 6000+15-0

greater thanspecified length

greater thanspecified length

C

Si

Mn

P

S

Cu

Tensilestrength(kg/mm2)

Outsidediameter

(mm)

Wall thickness

(mm)

Length(mm)

Eddy currentflaw detection

50 50 50 50 P = 200S t/D P = 200S t/DWater pressure

test(kg/cm2)

< 45 < 45 < 45 < 45 > 42 > 38

Yieldpoint(kg/mm2)

> 18 > 20 > 18 > 18 > 25 > 22

Elongation(%) > 35 > 35 > 30 > 30 > 25 > 30

Chemicalcomposition(%)

Mechanicalproperty

Dimensionaltolerance

Inspection and test

Relevant standardsJOHS hydraulic

line serviceJIS B2351

bite type fittingJIS G3455 carbon steel

pipes for high pressure service

Quality characteristic OST.1 OST.2 STPS.1 STPS.2 STS.40 STS.370



MALE STUD FORM AND SEALING

BCG-01BCG-02BCG-03BCG-04BCG-06BCG-08BCG-10BCG-12BCG-16

Part Number

PF 1/8PF 1/4PF 3/8PF 1/2PF 3/4PF 1

PF 1 1/4PF 1 1/2

PF 2

MaleThread

101417222734434961

d

182226323842536072

D

222222222

T

BBS-01BBS-02BBS-03BBS-04BBS-06BBS-08BBS-10BBS-12BBS-16

Part Number

PF 1/8PF 1/4PF 3/8PF 1/2PF 3/4PF 1

PF 1 1/4PF 1 1/2

PF 2

MaleThread

9.913.316.821.126.633.442.148.059.8

d

1720.52429

34.541.550.55769

D

22222

2.32.32.32.3

T

COPPER GASKET BONDED SEAL

PF 1/8PF 1/4PF 3/8PF 1/2PF 3/4PF 1

PF 1 1/4PF 1 1/2

PF 2

T

182428344551626876

11.615.618.622.629.835.844.850.867.2

17.420.924.429.434.941.950.957.469.4

9.713.116.620.926.433.241.947.859.6

18.222.226.232.238.242.353.360.372.3

141922273641505575

1418

21.525.531.538

48.553.566

101414171922242529

1.01.52.02.52.52.52.52.52.5

152020252731333438

2.02.52.52.53.53.53.53.53.5

111111111

P 8P 11P 14P 18P 24P 29P 38P 44P 56

BBS-01BBS-02BBS-03BBS-04BBS-06BBS-08BBS-10BBS-12BBS-16

BCG-01BCG-02BCG-03BCG-04BCG-06BCG-08BCG-10BCG-12BCG-16

d1 d2+0.10 d3+0.30 d5+0.30Maxd4

d6 d7Minl1

Maxl2

Minl3

l4+0.40 l5O-Ring Bonded Seal Copper Gasket

Suitable Seal


SUPERLOK TUBE FITTINGS BITE TYPE TUBE FITTINGS INSTRUMENT THREAD FITTINGS BALL VALVE 120 SERIES

BALL VALVE 210 SERIES BALL VALVE 360 SERIES PLUG VALVES MANIFOLD VALVES

INTEGRAL BONNET NEEDLE VALVES UNION BONNET NEEDLE VALVES CHECK VALVES SWING-OUT BALL VALVES

TOGGLE VALVES QUICK CONNECTS DOUBLE BLOCK&BLEED VALVES VACUUM CLAMP

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 9000 psig @100 F(38 C)OPERATING TEMPERATURE RANGE: -325 F(-198 C) TO 1200 F(648 C)

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 100~630 barg @100 °F(38°C)OPERATING TEMPERATURE RANGE: 800 °F(427°C)

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 10000 psig @100 °F(38°C)OPERATING TEMPERATURE RANGE: -325 °F(-198°C) TO 1200 °F(648°C)

SPECIFICATIONSMAXIMUM OPERATING PRESSURE: 2500 psig @70 °F(21°C)OPERATING TEMPERATURE RANGE: 50 °F(10°C) TO 150 °F(65°C)











SPECIFICATIONSMAXIMUM OPERATING PRESSURE: CLASS2500 (6000 psig) @100 °F(38°C)OPERATING TEMPERATURE RANGE: -65 °F(-54°C) TO 400 °F(204°C) WITH PEEK SEAT

PRODUCTS

MT CTJ-2 (09.01.16)

: 055-783-1000 : 055-783-1111

[email protected]

21-1, Bukjeong-dong Yangsan-siGyeongsangnam-do KoreaTel. 82-55-783-1000 Fax. [email protected]

Valve Series

Key Operation Ball ValvesKey Operation Needle ValvesBall ValvesIntegral Bonnet Needle ValvesUnion Bonnet Needle ValvesCheck ValvesHigh Pressure Check ValvesHigh Pressure Needle ValvesPlug ValvesManifold ValvesVacuum ClampsWater RegulatorsFlexible HosesDouble Block & Bleed ValvesSwing-Out Ball ValvesToggle ValvesBleed & Purge ValvesQuick ConnectorsHigh Pressure Ball ValvesHydraulic Ball ValvesTrunnion Ball ValvesRising Plug ValvesRelief ValvesCryogenic Needle ValvesCryogenic Ball ValvesMicron in-Line FiltersGauge Root ValvesHydraulic Flange and Components

Fitting Series

Tube Fittings (Compression Type)Instrument Thread FittingsForged FittingsBite Type Tube Fittings (DIN2353)Bite Type Tube Fittings (JIS B2351)37 Flared Tube Fittings (SAE J514)O-Ring Face Seal FittingsHose Connectors & Push-On Hose Fittings

Electric

MCPD(Molded Case Power Distributor)

0901 bmt jis ca · jis g4051 s20c-s48c jis g4051 s10c-s20c jis g4051 s20c-s48c jis g4051 s10c...

Documents