08. concrete repair & protection

PRODUCTS PAGE

Ardex 170

BASF 170

Flexcrete 171

Fosroc 172

Ronacrete 177

Sika 177

Weber 180

CMS Pozament 183

ConcreteRepair

&Protection

Concrete Repair & Protection

As distributors for the largestmanufacturers in the concrete repairmarket SIG Construction Accessories canoffer the solution to all your repairproblems. From large scale renovationsand structures, to restoring kerbs and jointarises, SIG Construction Accessories willhave a product or system to do the job.

Our range includes:• Primers & steel protection.• Cementitious repair mortars.• Resin repair mortars.• Crack injection and stitching materials.• Fast setting pavement repairs.• Decorative coatings.• Anti-carbonation coatings.• Concrete resurfacer.

Concrete Repair & Protection170

ConcreteRepair

&Protection

Type Size Coverage

Ardex A 45 11kg bags 7 litres per bag

Ardex A 46 11kg 8 litres per bag

Ardex PSRS 10kg two Dependent on porositycomponent tin and depth of the screed

Ardex K 301 25kg bag 1.6kg/m2/mm i.e. approx7.8m2 @ 2mm thickness/25kg bag

Concrete Repair Mortar

Type Size (kg) Coverage

Febset 45 25 11.6 litres

15 litres with 10kg aggregate

Febset 45

Febset 45BASF

Febset 45 is a specially formulated repair mortar, based on magnesia-phosphate cement pre-mixed with selected aggregates, which gives controlled, extremely high early strengths intemperatures ranging from -20°C (or lower) up to over 30°C, making it particularly useful in coldstore applications.

It provides a repair material for concrete slabs which reaches an adequate strength for trafficking,or other use, at a very early age. It is also suitable for use as a repair medium at low ambienttemperatures. Used for thicknesses above 20mm only, for depths of 30mm and above up to10kg of 10mm single sized coarse aggregate may be added.

Type Size (kg)

Febond SBR 5, 25

Febond SBR

Febond SBRBonding and waterproofing admixture to add to screeds, renders and repair mortar mixes.

ArdexArdex A 45 - Internal Repair MortarArdex A 45 is a rapid setting and drying repair mortar. Ideal for internal repair of stair treads,risers and other screed repairs. Hard enough to walk on and receive floor coverings after just 90minutes. Other applications are: forming ramps and falls, making good around fittings/pipework,filling cracks and joints.

Ardex A 46 - External & Internal Repair MortarArdex A 46 is a rapid setting and hardening, slump free mortar which is ideal for external orinternal repairs. The mortar sets and hardens rapidly to give a repair of exceptional strength andhardness. The mixed mortar sets after 20 minutes at 20°C, and can be trafficked after only 2 - 3hours when it is ready to receive floorcoverings. Ideal for repairing curbs, external concrete steps,renders and concrete floors.

Ardex PSRSPenetrating Screed Renovation System:• Rapid installation reducing overall construction time.• Overnight renovation of cement/sand screeds.• Minimum disruption to occupants.• Consolidated screeds can meet BS 8204 Soundness Category A requirement for floor screeds.• Solvent free.• Low odour.

Ardex K 301Simple and effective solution for smoothing and re-surfacing paths, garage floors, drives, walkways,parking areas and court yards. Ideal for levelling rain damaged or uneven concrete slabs.

Ardex A 35A rapid setting and drying cement for floor screeds. Used in place of Portland Cement incement/sand screeds, Ardex A 35 produces a floor screed that can be worked on after just threehours and is dry enough to receive floorcoverings after just 24 hours, regardless of screedthickness. Ardex A 35 coverage is approximately 2.3m2 per 25kg bag for 30mm 1:4 screed.

www.sigscp.co.uk 171

ConcreteRepair

&Protection

FlexcreteSteel Reinforcement Protector 841Polymer cement coating which is supplied with a convenient mixing kit for economical protectionof steel reinforcement. BBA certified.

MonoliteLow density, high yield, ultra-high build, shrinkage compensated, polymer modified mortar usedwithout a primer to repair and reprofile concrete, brick or stone substrates. Single componentcementitious formulation which is mixed with water to give rapid hardening and enhancedpolymeric properties with. Easy to apply in high build single applications up to 100mm andparticularly suitable for vertical and overhead situations. Finishes to a high quality polymer richsurface. Certified to EN 1504-3 Class R2.

MonomixMulti-purpose, structural grade, shrinkage compensated, polymer modified repair mortar forreinstatement of vertical, horizontal and overhead surfaces. Incorporating the latest technology, thelow density, high strength, thixotropic nature enables high build application without a primer insingle thicknesses up to 80mm (including overhead). Totally resistant to water under a 100 metrehydrostatic head, it is suitable for use as a waterproof render in tanks and basements and has DWIApproval for use in contact with drinking water. Compliant with Highways Agency StandardBD27/86, BBA certified and CE Marked in compliance with EN 1504-3 Class R3.

Monomix HDThis high performance mortar builds on the core technology to provide an extremely durable,55N/mm² compressive strength repair compound which is suited both for heavily trafficked areasand for high build applications, matching the 80mm single application thickness achieved bystandard Monomix even when used overhead. Like all Flexcrete mortars, Monomix HD does notrequire a primer to promote adhesion. Compliant with Highways Agency Standard BD27/86, andcertified to EN 1504-3 Class R4.

FastfillSingle component, polymer modified, fibre reinforced, Portland cement based compound, whichexhibits unique hydraulic properties to produce a rapid curing mortar with an ultimatecompressive strength of circa 66N/mm². Ideally suited for both in-situ and precast concrete,including areas which are subjected to heavy wear. Applications include slabs in industrial floors,runways, roadways and footpaths as well areas subject to early immersion. Suitable for thicknessbetween 5-300mm, Fastfill can be bulked out with aggregate to produce a cost effective mortarfor filling of large voids or for the bedding of street furniture, kerbs, drainage channels, pipesetc. DWI Approved for use in contact with drinking water, compliant with Highways AgencyStandard BD27/86, BBA certified and CE Marked in compliance with EN 1504-3 Class R4.

MonolevelA range of single component, polymer modified mortars for rendering and reprofiling of in-situand pre-cast concrete and brickwork to produce a high quality, decorative engineering finish.Simply mixed with water on-site, application is by spray, trowel or bag rubbing techniques. Usesinclude fairing coats to fill minor voids and defects on new and existing structures (Monolevel FCEN 1504-3 R2), waterproofing of basements and water tanks including drinking water structures(Monolevel 844SP EN 1504-3 R4) and waterproof external rendering of brick and blockwork(Monolevel RM).

MonopourUltra high flow, waterproof micro-concrete or grout, Monopour is shrinkage compensated andpolymer modified to give rapid early strength development. Compliant with Highways AgencyStandard BD27/86.

Cementitous Coating 851A two-component, polymer modified cementitious coating which cures to form a flexible, highlyalkaline film which has a variety of uses on new and existing structures. It provides totalwaterproofing against positive and negative pressure and is tested under a 100 metre hydrostatichead. It protects concrete against the effects of freeze thaw cycles, Chloride ions (including de-icing salts), carbon dioxide, dilute acids & alkalies as well as being suitable for brickwork andblockwork. Uses include potable water (DWI Approved) containment, basement waterproofingand chloride protection for marine and highway structures. It is particularly effective at reinstatingconcrete cover and a 2mm film is equivalent to100mm of good quality concrete cover. Used inconjunction with Flexcrete Marine Mortar for repair and chloride protection in tidal zones. BBAcertified and CE Marked in compliance with EN 1504-2.

Bonding Bridge 842A polymer cement impregnant for sealing and enhancing bond on high porosity substrates.


ConcreteRepair

&Protection

Type Size (kg) Yield (litres) Coverage

Steel ReinforcementProtector 841 5 2.8 45 linear metres of 10mm bar

Monolite 20 18.5 1.85m2 @10mm thickness

Monomix 25 16.5 1.65m2 @ 10mm thickness

Monomix HD 25 13.1 1.31m2 @ 10mm thickness

Fastfill 25 13.3 1.33m2 @ 10mm thickness

Monolevel FC 25 15 5m2 @ 3mm thickness

Monolevel 844SP 25 15 5m2 @ 3mm thickness

Monolevel RM 25 14 1.4m2 @ 10mm thickness

Monopour PC6 25 12.2 1.22m2 @10mm thickness

Monopour PG 25 12.5 1.25m2 @10mm thickness

Cementitious Coating 851 30 16.67 8.33m2/30kg @ 2mm thickness

Bonding Bridge 842 4 2.1 16m2 per pack

Flexcrete Concrete Repair and Protection

All products (except 851) are supplied as a single component system, ready for on-sitemixing and use, requiring only the addition of clean water. Packs can be split for economicuse (not 851).

FosrocFosroc offers a comprehensive range of concrete repair products. The range includescementitious repair mortars, epoxy mortars, coatings and crack injection systems. From smallpatch repairs to complete concrete rehabilitation, Fosroc has the solution to suit any job.

RenderocCementitious Repair MortarsFosroc’s cementitious repair systems include the world-renowned Renderoc mortars. These arepre-bagged, single component products available in various grades depending on the application.

Renderoc GPGeneral purpose concrete reinstatement mortar which can also be used as a render as well as alltypes of patch repairs. It can be applied up to 20mm thick in overhead and 30mm in verticalsections. In horizontal applications 100mm thickness can be obtained.

Renderoc HBSingle component lightweight fibre and polymer modified concrete reinstatement mortar forhigh build applications. Renderoc HB can be applied up to 80mm thick in vertical and 50mm inoverhead work without the use of formwork. Thicker sections can be achieved by use of use offormwork or built up in layers. Thickness range 10mm-50mm.

Renderoc SStructural grade polymer modified concrete reinstatement mortar. Used for repairs of large areasof concrete and for localised patch repairs. The application range is 5-10mm in vertical and5-100mm in horizontal situations.

Renderoc LASingle component free-flowing low alkali micro-concrete. The product is highly fluid and obviatesthe need for compaction and vibration where access is restricted or reinforcement congested.Renderoc LA is ideal for the reinstatement of large structural sections of concrete.

Renderoc LA55Low alkali, high performance micro-concrete for the reinstatement of large, structural sections ofconcrete. Renderoc LA55 is BBA accredited, cert no. 98/3461.

Renderoc DSPolymer modified dry spray repair mortar. DS is designed for large area repairs such as bridges,tunnels, retaining walls, dams etc. Complies with DTp specification series 1700.

Renderoc HB25High performance lightweight concrete repair mortar designed for overhead/soffit repairs. It canalso be used for non-structural column repairs and where deep pocket repairs are required in oneapplication. Renderoc HB25 is BBA accredited, cert no. 98/3461. Thickness range up to 80mmvertical and 60mm overhead.


ConcreteRepair

&Protection

NitocoteNitocote EP403Nitocote EP403 is a damp-tolerant protective coating for concrete and mild steel. The cured filmis corrosion, chemical and abrasion resistant and is suitable for application to sewage works,marine environments, basements and tunnels. It is particularly useful where concrete surfaces aredamp and cannot be dried out.

Nitocote EP405Nitocote EP405 is a solvent-free epoxy resin coating used for lining and waterproofing potablewater retaining structures and surfaces subject to contact with foodstuffs. The cured film iscorrosion, chemical and abrasion resistant and is suitable for application to tanks, silos, reservoirs,water treatment works, breweries, dairies and meat and food processing plants. Nitocote EP 405is a WRAS approved product. Available in two colours, blue and white.

Nitocote EP410Nitocote EP410 is a solvent-free epoxy resin coating with high chemical resistance. It is used toprotect to concrete and steel structures in aggressive chemical immersion conditions. Thematerial is particularly suitable for applications in process plants and sewage works.

Nitocote SN502Nitocote SN502 is a high performance silane-siloxane treatment for concrete and masonry. It isused to protect concrete structures from attack by chloride ions and water. SN502 is suitable forall types of structures, including those in coastal areas.

Nitocote SN511Nitocote SN511 is a high performance water repellant treatment specifically used for protectingreinforced concrete roads and bridges. SN511 is DTp specified and protects concrete from waterand chloride ingress whilst still allowing it to breathe.

Type Size Coverage

Nitocote EP403 2.5kg packs (1.5 litres) 3m2 per kg per coat (5m2 per litre)

Nitocote EP405 2.5kg packs (1.5 litres) 3m2 per kg per coat (5m2 per litre)

Nitocote EP410 5.6kg packs 15.68m2

Nitocote SN502 25, 200 litre containers 5m2 per litre per coat

Nitocote SN511 25 litre container 0.3 litres/m2 per coat (minimum)

Nitocote

Renderoc RP252Cementitious mortar for re-profiling concrete structures. It can be used either to produce a fair-faced finish in preparation for a protective coating (see Dekguard range) or as a protectivemortar layer. Renderoc RP252 can also be used to render large sections of concrete. RenderocRP252 is BBA accredited, cert no. 98/3461.

Renderoc FCCementitious fairing coat for filling blowholes prior to coating. It is designed for vertical andoverhead use to infill honeycombing and voids up to 3mm deep in the surface of concrete.Renderoc FC must be overcoated. Renderoc FC is BBA accreditied, cert no. 98/3461.

Type Size Coverage

Renderoc GP 25kg bag 1.6m2 @ 10mm thickness

Renderoc HB 18kg bag 1.5m2 @ 10mm thickness

Renderoc S 25kg bag 1.2m2 @ 10mm thickness

Renderoc LA 25kg bag Approximately 12 litres/25kg bag

Renderoc LA55 25kg bag Approximately 12 litres/25kg bag

Renderoc DS 25kg bag 2m2 @ 10mm thickness

Renderoc HB25 18kg bag Approximately 1.5m2 @ 10mm thickness

Renderoc HB40 25kg bag Approximately 1.5m2 @ 10mm thickness

Renderoc RP252 Kit 3.4 litre liquid Approximately 2.4m2 @ 5mm thickness+ 20kg bag

Renderoc FC 25kg bags 5m2 @ 3mm thickness

Renderoc


ConcreteRepair

&Protection

PaverocReinstatement mortar for large area repairs of concrete pavements and floors to avoid the totalreplacement of bays. Can be used internally or externally in thicknesses between 12mm and100mm in a single application. Primer for Paveroc is Nitobond EP.


Paveroc 25 0.9m2 @ 12mm thickness

Nitobond EP 2.5, 4.5 2m2 per kg

Paveroc

Patchroc GPEmergency Fast Setting repair mortar for concrete pavements and floors can accept traffic in2hrs. For use at depths from 12mm to 100mm in a single application and a maximum bay size of4m2. Primed with Nitobond AR for pedestrian traffic and Nitobond EP for vehicular.

Type Size Coverage

Patchroc GP 25kg bag 1m2 @ 12mm thickness

Nitobond AR 5, 25 litre 6-8m2 per litre

Nitobond EP 2.5, 4.5kg 2m2 per kg

Patchroc GP

GalvafroidGalvafroid is an anti-rust coating for iron and steel. It is cold-applied by brush or roller and isused for the protection of structural steelwork, agricultural and construction plant, gates, railings,iron pipework and in-situ weldings. Galvafroid is grey in colour and can be used as a self-finish oras a durable anti-rust coating beneath selected top coats.

Type Size Coverage

Galvafroid 400ml tins 16m2/litre when used as a primer800ml tins 8m2/litre when used as a self-finish1.9 litre tin

Galvafroid

NitomortarResin Repair MortarsFosroc has a range of epoxy and polyester reinstatement mortars for jobs where high strength isrequired quickly. These include:

Nitomortar HBLightweight chemical resistant epoxy mortar for vertical and overhead applications, thicknessrange 10mm–50mm.

Nitomortar SHigh strength, chemical resistant epoxy mortar, ideal for industrial floors, tanks and sea walls,thickness range 5mm–50mm.

Nitomortar FCEpoxy fairing coat for filling blowholes and surface preparation. Chemical resistant.

Nitomortar PE and PE ConcreteMulti-purpose, rapid setting polyester mortar for precast units and universal repair, particularlykerbs. Nitomortar PE is the standard material for general purpose use and Nitomortar PEConcrete is a special grade allowing users to add suitable aggregate, thereby substantiallyreducing the cost of infilling larger voids. Both grades are chemical resistant.

Expocrete UAEpoxy repair mortar for underwater applications and reinstating structures exposed to heavybattering from the sea. Minimum thickness 3mm.


ConcreteRepair

&Protection

NitofilNitofil LVLow viscosity epoxy resin injection grout for cracks between 0.25mm and 9mm where both sidesof the crack can be sealed against resin drainage.

Nitofil THThixotropic epoxy resin injection grout for cracks between 0.5mm and 9mm where both sides ofthe crack cannot be completely sealed.

Type Size (litre)

Nitofil LV 1.5

Nitofil TH 1

Nitokit LV / TH

NitokitCrack InjectionFosroc supplies crack injection systems for minor concrete repairs, ideal for in-situ or precastconcrete. These are available as pre-packaged kits for fast and easy application or as standaloneinjection grouts for bespoke repair.

Nitokit LVPre-packaged, low viscosity epoxy crack injection resin, suitable for cracks down to 0.2mm atsurface or tapering down to 0.01mm.

Nitokit THPre-packaged, thixotropic epoxy crack injection resin, suitable for open-ended cracks wheredepth and quantity needs to be controlled.

The Nitokit systems are ideal for small scale repairs on and are also suitable for the insitu orprecast concrete elements.

Type Size Coverage

Nitomortar HB 2.9, 9.3kg 2.5, 8 litres

Nitomortar S 5, 16kg 2.5, 8 litres

Nitomortar FC 1kg 0.6 litres

Nitomortar PE 14kg 7.5 litres

Nitomortar PE Concrete 11kg 15 to 27.5 litres

Expocrete UA 1.5 litre packs 1 litre/m2 per mm thickness

Yield: Typically 10 litres of product will yield 1m2@ 10mm thickness.

Epoxy Repair Mortars

Type Size

Nitokit LV / TH 12 cartridges - 0.25 litre of mixed resin

30 injection nipples

6 hoses

4 air release pins

6 mixing rods

Nitokit LV / TH

Contents

1 injection gun

1 plastic bucket

10 pairs disposable gloves

2 pairs goggles

1 x 5.5 litre pack Nitokit Surface Sealant

Accessory pack


ConcreteRepair

&Protection

Fosroc CoatingsFosroc's durable and attractive coatings are designed to perform in harsh environments and arechemical, abrasion and carbonation resistant.

Dekguard WDekguard W water-based coloured coating protects exposed reinforced concrete structures,cementitious substrates and masonry from aggressive elements, weathering and rain. It issuitable for use on all types of structures, including those in coastal environments. Available in awide range of colours. Dekguard W is BBA accredited, cert no. 98/3461.

Dekguard SDekguard S is a high performance coating for exposed concrete and masonry that providesoutstanding resistance to aggressive elements, UV light and rain. Available in a wide range ofcolours. Dekguard S is BBA accredited, cert no. 98/3461.

Dekguard ElasticDekguard Elastic is a water-based coloured elastomeric coating for exposed concrete andmasonry. It provides excellent elongation and recovery, low dirt pickup, resistance to aggressiveelements, UV light and rain. Available in a wide range of colours. Dekguard Elastic is BBAaccredited, cert no, 98/3461.

Type Size Coverage

Nitobond AR 5, 25 litre drums 4-6m2/litre*

Nitobond HAR 5, 25 litre drums 4-6m2/litre*

Nitobond SBR 5, 25, 210 litre drums Refer to mixdesigns table page 188

Nitobond EP Standard 2.5, 4.5kg packs 5m2, 10m2

Nitobond EP Slowset 4.5kg packs 10m2

Nitoprime Zincrich Plus 800ml, 1.9 litre 7.4m2 per litre

* HAR/AR as primers, usage varies in other applications.

Primers and bonding agents

Dekguard ClearDekguard Clear Topcoat is a Topcoat colourless protective coating system for exposed concreteand masonry. It provides resistance to aggressive elements, weathering and rain.

A major feature of the system is its ability to allow water vapour to escape from the structure.

Dekguard TexturedDekguard Textured is a textured weather-resistant coating for exposed concrete and masonry. Itprovides low dirt pick-up, resistance to aggressive elements, UV light and rain. Available in awide range of colours.

Dekguard PrimerA reactive silane-siloxane treatment for use with Dekguard products.

Nitoprime DGPrimer specifically for use with Dekguard Elastic.

Fosroc Primers and Bonding AgentsNitobond ARCuring membrane for Renderoc system and primer for Renderoc S and Patchroc GP.

Nitobond HARConcrete bonding agent, used as primer for Renderoc HB, HB25, HB40 and GP.

Nitobond SBRAdditive for improving mortars for waterproofing repairs. Also used as a bonding agent forslip bricks, ceramic tiles etc.

Nitobond EP Standard / SlowsetUsed for bonding old to new concrete. Also primer for Patchroc / Paveroc and Renderoccementitious systems.

Nitoprime Zincrich PlusEpoxy zinc primer used as anti-corrosion coating for exposed steel reinforcement in concreterepairs.


ConcreteRepair

&Protection

Type Size (litres) Coverage (m2/litre)

Dekguard W 10 2.75

Dekguard S 10 3

Dekguard Elastic 10 1.25

Dekguard Clear 25 7.5

Dekguard Textured 10 2

Dekguard Primer 25 2.5

Nitoprime DG 25 2.5

Fosroc Coatings

MonosetMonoset is a range of Ultra rapid strength gain mortars and fine concrete.

Monoset MortarA bedding mortar for raising manhole frames and ironwork. Traffic after one hour at 20ºC.

Monoset ConcreteA rapid set concrete for application depths between 50mm to 150mm.Traffic after one hour at 20ºC.

Monoset RXFor repairs to floors, roads and carriageways for applications 2mm to 6mm.Traffic after one hour at 20ºC.

RonafixRonafix is a high performance agrement board certified water based SBR polymer for repairingconcrete and protecting reinforcing steel. The product has and BBA certificate and is suitable forstructural repairs. Supplied in 5 and 25 litre containers. Mix designs for the use of Ronafix arefound on page 188.

Sika MonoTopSika Monotop 610A single component polymer modified cementitious bonding bridge and steel reinforcementprimer.

Sika Monotop 612A cement-based, one component low permeability repair microconcrete, containing silica fumeand polymer, thickness range 5mm–30mm.

Sika Monotop 615A one component cement based polymer modified high build repair and re-profiling mortar,thickness range 3mm–30mm.

Sika Monotop 620A one component cementitious polymer modified mortar, thickness range 1.5mm–5mm.

Sika

Ronabond HB40Prepacked high build high strength concrete repair mortar for repairing concrete and protectingreinforcing steel. Designed to repair concrete on vertical surfaces and suited to the repair ofoverhead concrete where ease of application is important.

Ronabond

Type Size (kg) Yield (litres) Coverage (m2)

Ronabond HB40 18 13 1 @ 13mm2

Ronabond HB40 Primer 2 N/A 3 - 4

Ronacrete


Sika Monotop 610 25 1.5 - 2kg/m2/coat

Sika Monotop 612 25 2.11kg/m2/mm

Sika Monotop 615 25 1.65kg/m2/mm

Sika Monotop 620 25 2kg/m2/mm

Sika Monotop


ConcreteRepair

&Protection

Sika FerroGard 903Sika FerroGard 903 is a surface applied migratory corrosion inhibitor, designed for use as animpregnation of steel reinforced concrete.

Type Size (kg) Coverage (kg/m2)

Sika FerroGard 903 25 0.5

Sika FerroGard 903

SikaGardSikagard 62Sikagard 62 is a two-component solvent free, high build coloured epoxy resin coating with highchemical resistance and approved for use in contact with potable (drinking) water.

SikaGard 63NA solvent free, two-part epoxy resin coating ideal for bund areas.


SikaGard 62 5 Approximately 0.2 - 0.4kg/m2

SikaGard 63N 10 0.3 - 1kg/m2 per coat, dependent on substratecondition and required coating thickness

SikaGard

Sika AdhesivesSikadur 31Two pack epoxy thixotropic adhesive for bonding building materials. Fast setting and nonshrinking. For sticking brick slips, bedding tiles, wood etc. NWC/WRC certified for contact withpotable water. Normal grade (N): for 5-30°C application, Rapid grade (R): for 0-15°C application.

Sikadur 32Two pack solvent free liquid epoxy bonding agent in 1 and 5 kilo packs. For bonding similar anddissimilar materials, e.g. concrete, metal, stone, glass, wood and asbestos.

Sikadur 33Sikadur 33 is a two-component epoxy resin adhesive in a cartridge to fit normal skeleton gun.

Type Size Coverage

Sikadur 31 1.2kg N, 6kg N 1.65kg/m2/mm

1.2kg R, 6kg R

Sikadur 32 5kg 0.7kg/m2 @ 0.5mm thickness

Sikadur 33 250ml 250ml

Sikadur

SikatopSikatop Armatec 110Anti-corrosive coating for steel reinforcement prior to concrete repair. For protection againstcorrosion.

Sikatop 121Pre-packed ready for use. Adhesive mortar, two part cement-polymer base used for cosmeticrepairs i.e. blow holes etc. and also as a bonding bridge for Sikatop 122 or 122HB.

Sikatop 122High strength repair mortar, two part component cement-polymer base used for waterproofpatching repairs to concrete, stone, mortars etc. Thickness range 4mm – 20mm verticalapplications and up to 75mm in horizontal if bulked out with 3-6mm granite chippings.

Sikatop 122HBPre batched lightweight polymer modified cementitious mortar for repairs to concrete. Adhesivemortar, two part cement-polymer base used for non structural overhead and vertical repairs, veryeasy to-use. Thickness range 5mm-40mm.


ConcreteRepair

&Protection

Sika CoatingsSikaColor 671 WA one-part coating based on water dispersed acrylic resin designed for protection, decorationand waterproofing of facades, with a smooth coloured finish.

Sikagard 550 W ElasticA one-part, elastomeric coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0°C.

Sikagard 680 S Clear GlazeColourless material drying to a glossy coat, suitable as refresher and protective coating forexposed aggregate concrete.

Sikagard ElastoColor 675 WA one-part, plasto-elastic water dispersed coating based on a styrene acrylate dispersion for theprotection and enhancement of fair faced concrete.

Sikagard 680 S CosmeticA one-part solvent containing coating, based on methacrylic resins resistant to weathering, alkalisand ageing. Sikagard 680 S protects concrete against aggressive atmospheric influences andpromotes a self-cleaning effect on the treated surfaces. It does not adversely influence thecharacteristic texture of the concrete.

Sikagard 700 SA one-part water repellent impregnation for absorbent cementitious substrates. It penetrates wellinto the open pores of the substrate, providing a durable water repellency, while still allowingwater vapour diffusion in both directions.


Sikatop Armatec 110 20 2kg/m2/coat

Sikatop 121 10, 25 2kg/m2 per mm thickness

Sikatop 122 10, 25 2.1kg/m2 per mm thickness

Sikatop 122HB 10, 25 1.4kg/m2 per mm thickness

Sikatop

Sika Epoxy Mortars and Crack Repair

Sikadur 41CFTrowel applied epoxy patching mortar in concrete grey colour. For heavy duty repairs in damagedand defective areas in concrete, mortar, screeds, bridge bearings etc.

Sikadur 52Very low viscosity crack injection non shrink, solvent free epoxy, for repair by pouring or injectioninto cracks in concrete, also for stabilising lifted screeds. Colour: clear.

Type Size Coverage

Sikadur 41CF 10kg N, 10kg R 2kg/m2 per mm thickness

Sikadur 52 1kg 1.1kg/m2 per mm thickness

Sika Epoxy Mortars and Crack Repair

Type Size Coverage

Sikagard 550 W 15 litre 0.25 - 0.35kg/m2 per coat

SikaColor 671 W 25kg 0.2kg/m2 per coat

Sikagard ElastoColor 675 W 15 litres 0.2 - 0.25kg/m2 per coat

Sikagard 680 S Clear Glaze 20kg pail 0.15kg/m2

Sikagard 680 S Cosmetic 30kg pail 0.2kg/m2

Sikagard 700 S 20 litre pail 0.25 litre/m2

Sika Coatings


ConcreteRepair

&Protection

weber.cem spray DSA ready-to-use, polymer-modified, cement-based concrete mix. It contains inert limestoneaggregates and dust suppressants. The formulation has been designed specially for dry processspray application to give high early strength, reduced rebound and maximise applicationthickness.

weber.cem pyrapatchIs a prepacked product based on hydraulic cements with specially graded non-reactiveaggregates. The product is polymer modified which when mixed with clean water produces afast setting repair concrete, suitable for patch or full depth repairs up to 2m2.

weber.cem pyratopA rapid strength gain repair concrete for thin bond pavement repairs, which is a prepackedhydraulic cement-based product with specially graded aggregates. It exhibits high early strength,is dimensionally stable and has excellent abrasion resistance.

Five Star Repair ConcreteA preblended cementitious repair concrete which fully complies with the Highways AgencySpecification for Highway Works and Department of Transport specification BD 27/86 for a highstrength flowing concrete.

weber.tec EP bonding aidA high-build epoxy resin for priming epoxy repair mortars for bonding to concrete and masonrystructures. Exceptional bond to vertical and soffit applications for priming lightweight repairmortars.

Weberweber.cemThe weber.cem concrete repair system is a pre-bagged, multi component system based onpolymer-modified Portland Cement mortars and coatings based on acrylic resins.

weber.cem keycoatA single-component, polymer-modified, corrosion-inhibiting bonding primer for substrateconcrete and steel reinforcement.

weber.cem mortarweber.cem mortar is a general purpose mortar for the repair of concrete, to both horizontal andvertical surfaces.

weber.cem lightweightA polymer modified cementitious mortar mix, with specially selected lightweight fillers. It ispreblended, contains a polymer powder and simply requires the addition of clean water toproduce a mortar suitable for both soffit and vertical repairs in situations where high buildreplacement with conventional concrete is impractical. High-build up to 75 mm in soffit patchrepairs, without formwork.

weber.cem HB30 and HB40Single-component, polymer modified high build mortars for replacing defective concrete with30N/mm2 and 40N/mm2 compressive strength, thickness range up to 100mm vertically and75mm on soffits.

weber.cem fairing coatA single-component, polymer-modified levelling mortar used to prevent ghosting of concreterepairs through decorative finishes.


ConcreteRepair

&Protection

Type Size Coverage

weber.cem brushcoat 20kg plastic bucket; A + B produces a yield of 10.8 litres,

15kg bag of powder (Component A) sufficient to cover 10m2 per 1mm coat.

5 litre bottle of SBR Latex (Component B)

weber.tec Brushcoat

weber.tec guard MCIIs a clear surface-applied corrosion inhibitor designed to migrate through reinforced concrete andpreserve steel reinforcing bars embedded in concrete. It forms a mono-molecular protective layeraround the steel within a week of treatment depending on the permeability and moisturecontent of the concrete.

Type Size Coverage (litres/m2)

weber.tec guard MCI 20 litre plastic containers 0.25

weber.tec guard MCI


weber.cem keycoat 25 1kg per m2

weber.cem mortar 25 1m2 @ 12mm thick - 12 litres

weber.cem lightweight 20 1m2 @ 16mm thick - 16 litres

weber.cem HB30 and HB40 20 16 litres per 20kg bagor 0.5m2 at 30mm thickness

weber.cem fairing coat 25 13 litres per 25kg bagor 6.5m2 per bag at 2mm thickness

weber.cem spray DS 25 Approximately 11.5 litres per 25kg bag,allowance must be madefor rebound and profiling

weber.cem pyrapatch 25 approximately 12 litres

weber.cem pyratop 25 approximately 12 litres

Five Star repair concrete 25 12.75 litres

weber.tec EP bonding aid 5.6 1.2m2 - 2.5m2/kg

Weber Concrete Repair Materials

weber.cem brushcoatIs a two-component, SBR Latex modified, flexible cementitious coating for brush, spray or rollerapplication. It is formulated as a protective, levelling coating to cover non-structural surfacedefects in new and old concrete.

Type Size (kg) Yield (litre)

Bonding Aid 0.56 0.55.6 5.0

Bonding Aid

Epoxy Plus Bonding AidAn epoxy primer for protection to reinforcement steel prior to application of weber.cem ConcreteRepair System and Five Star Repair Concrete.

weber.tec EP mortarIs a three-component bulk pack or as a two-component handy pack, consisting of epoxy resin,hardener and selected graded aggregates (filler) which when mixed produce a high strength,impermeable and chemically resistant mortar.

weber.tec EP highbuildConsists of epoxy resin, hardener and special lightweight aggregates which, when mixed,produces an epoxy mortar of a lightweight thixotropic nature. The mortar has low slumpcharacteristics suitable for the repair of damaged concrete on vertical and overhead applications.

weber.tec EP IKContains all materials, application gun, and the ancillary items that will normally be required tocarry out an efficient on-site repair of cracked concrete at widths down to approximately 0.5mm.

Weber Resin Repair Mortars


ConcreteRepair

&Protection

weber.tec Sealersweber.tec aquapel WRA solvent-based, hydrophobic impregnating agent based on a solution of silane resin. Itpenetrates into the pores of the surface being treated, forming a silicone resin in situ and as aconsequence imparts water repellent properties to most external building surfaces.

weber.tec acrylic sealerA low viscosity, colourless, penetrating sealer. The product is based on a pure acrylic resin inaromatic solvents. The concept is to achieve an in-surface seal with no material build-up.

weber.tec mulsibondA low viscosity, specially blended acrylic copolymer emulsion-based product with exceptionalpenetrating properties. It has been used successfully for sealing hairline cracks in reinforcedconcrete, granolithic, mosaic and terrazzo floors and for consolidating hollow floor screeds.

Type Size (litres) Coverage

weber.tec aquapel WR 5, 25, 200* Approx 3 - 6m2 per litre

weber.tec acrylic sealer 5, 25, 200* 8 - 16m2 per litre per coat

weber.tec mulsibond 5, 25*non-returnable.

weber.tec Sealers

Type Size Coverage

weber.tec EP mortar 26kg pack Yield approx 12.5 litres

weber.tec EP highbuild 16kg pack approx. 12 litres

weber.tec EP IK 0.6 litre weber.tec EP IK filler

4 x 0.25 litre weber.tec injection resin

10 x Injection nipples

4 x 320cc plastic cartridges, plungers and nozzles

1 x tube clamp

Applicator gun

300mm x 6.5mm dia. plastic tube

Disposable plastic gloves

mall jubilee clip to hold tubing on nipples

Detailed instruction sheet

weber.tec EP 5 litre packs 1 litre of mixed resin will fill 10 metres

injection resins of crack at 1mm wide and 100mmdepth

weber.tec EP bonding aid 5.6kg packs 1.2m2 - 2.5m2/kg

weber.tec bedding mortar 25kg 12 litres

weber.tec mortar 25kg 12.5 litres

Weber Repair Mortars

weber.tec EP injection resinA two-component low viscocity resin for crack injection systems. The resin will structurally bondthe fractured sections and seal fine cracks against ingress of water and/or aggressive agents.

weber.tec EP injection resin TIs a moisture-tolerant gel thixotropic epoxy resin for structural repairs to cracked concrete andmasonry. The resin will repel dampness in the cracks and bond the broken sections.

weber.tec bedding mortarA two-component, polyester-based mortar for the bedding and fixing of manhole frames, airportlanding lights, duct frames and precast concrete units. It has been formulated for easy mixingand placement, even at low temperatures and, when cured, provides a durable, chemicallyresistant bedding and fixing material with good bond strength.

weber.tec mortarIs a three-component bulk pack or as a two-component handy pack, consisting of polyesterresin, hardener and selected graded aggregates (filler) which when mixed produce a highstrength, impermeable and chemically resistant mortar.


ConcreteRepair

&Protection

weber.cote coatings (was mulsicoat coatings)Single-component, acrylic anti-carbonation coatings for the long term protection of existingconcrete and new repairs. Available in clear, pigmented smooth, flexible and elastomeric versions.weber.cote coatings are applied by brush, roller or airless spray in two coats. If stabilisation of theconcrete is required prior to application, the surface should be treated using weber.cote primer(was sealercoat).

The coverage of weber.cote coatings will vary depending on the type of substrate and thesurface porosity. The following is a guide for brush or roller application two coats on to smoothsurfaces.

weber.cote clearExternal decorative anti-carbonation coating in a clear finish.

weber.cote smoothExternal decorative anti-carbonation coating in a smooth finish.

weber.cote ECElastomeric flexible anti-carbonation coating for concrete.

weber.cote primerStabilises and seals substrate prior to the application of Weber.cote smooth or Elastomeric.

Type Size (litres) Coverage

weber.cote clear 15 2 - 2.5m2/litre in 2 coats

weber.cote smooth 15 3 - 6m2/litre in 2 coats

weber.cote EC 15 1 - 2m2/litre in 2 coats

weber.cote primer 5 10 - 12m2/litre

weber.cote Coatings

Type Size Yield

Cemrok HB 16kg 14.25 litres/25kg

Cemrok AM 25kg 14.7 litres/25kg

Cemrok Steel Primer 25kg 0.15 litres/m2

Concrete Primer A 5ltr 0.15 litres/m2



Cemrok Easi-Patch - Grey 25kg 13.5 litres/m2

Cemrok Easi-Patch - White 25kg 13.5 litres/m2

Cemrok Plug ExCel 25kg 16.75 litres/25kg

CMS - Repair Mortars

CMS - Repair MortarsCemrok HBA low density, high build, shrinkage compensated patch repair mortar incorporating 3mm fibresand designed for the rapid reinstatement of both vertical and overhead repairs to concrete. Anysaw-cut edges should be roughened and reinforcement cleaned to bright steel and treated withCemrok Steel Primer prior to application of Cemrok HB.

Cemrok AMA pre-blended rapid setting hand applied mortar with an extremely high bond in wet conditions.Used for highway structures, bridge columns, beams, abutments, marine structures, viaducts andRC frames. Any saw-cut edges should be roughened and reinforcement cleaned to bright steeland treated with Cemrok Steel Primer prior to application of Cemrok AM. Permeable concretesshould be treated with a suitable concrete primer such as Concrete Primer A.

Cemrok Easi-Patch (Grey & White)A blend of ordinary and specialist cements, high quality graded aggregates and a uniquecombination of polymers and admixtures for use in caulking of precast tunnel segments andpointing of tunnel bolt holes, brick and blockwork.

Cemrok Plug ExcelA rapid setting putty for below waterline repair work to concrete and brick structures.

CMS Pozament


ConcreteRepair

&Protection

Type Size (kg) Yield (litres / kg)

Cemrok Standard Repair 25 11.75 / 25

Cemrok FST 25 12.2 / 25

Cemrok Easi-Flow 25 13 / 25

Cemrok FS/A 25 12.9 / 25

Cemrok FS/CR 25 12.9 / 25

CMS - Repair Concretes

CMS - Repair ConcretesCemrok Standard Repair ConcreteA high strength, rapid setting, flowing, shrinkage compensated concrete for repair ofcarriageways, runways and bridge decks.

Cemrok FST ConcreteA very high strength, rapid setting, flowing shrinkage compensated concrete for structural repairof concrete carriageways, runways and rail track beds, etc.

Cemrok Easi-Flow ConcreteUsed for structural repairs to beams, columns and bridge decks. DTP compliant.

Cemrok FS/A ConcreteFor rapid reinstatement of concrete on car park decks, columns and beams, etc., grouting postsand street furniture.

Cemrok FS/CR ConcreteStainless steel fibre reinforced for rapid reinstatement of crane rail foundations.

Type Size Yield

Concrete Primer A 5, 10, 25 litres 0.15 litres/m2

Cemrok Steel Primer 25kg 0.15 litres/m2

Cemrok SBR/BA 25kg Not Applicable becauseyield is dependent upon the

mix of the other items

Cemrok FC 25kg 15.75 litres/25kg

CMS - Primers, Fairing and Curing

CMS - Primers, Fairing and CuringConcrete Primer ADesigned to give maximum penetration into the substrate in order to enhance the adhesion ofCemrok Repair Materials and flooring products.

Concrete Steel PrimerDesigned as a bond enhancing coating for priming corroded steel reinforcement prior to theapplication of a Cemrok concrete repair material.

Cemrok SBR/BAA Styrene-Butadiene Copolymer designed to benefit bonding of repair mortar or other cementbased materials to a variety of substrates.

Cemrok FCA single component polymer modified levelling material specially formulated to improve theaesthetic appearance of concrete surfaces. Fills honeycombing and blow holes.

The following CMS Pozament productsare available on request:• Cemgrout grouting products.• Specialised grouts for the tunnelling andcivil engineering sector.

• Cemcaulk caulking products.• Limelight plasters.• Comprehensive plaster range.• Limelight cement-free mortars and grouts.

• Heritage mortars and grouts and St. Paulsgrout mix.

• Pointmaster.• Pressure pointing mortars.• Renders.• High performance renders - available in10 colours.


ConcreteRepair

&Protection

Type Size Yield

Roadmaster SMA PSV60 25kg 100kg/m2/1 layer

Roadmaster SMA PSV65 25kg 100kg/m2/1 layer

Pathmaster 25kg 1m2/10mm thick/25kg

RepairMaster 6mm Tub 25kg 1m2/10mm thick/25kg

Edgemaster Can 600ml N/A*

Top-Pac Macadam 25kg N/A*

Top-Pac Chippings - Black 25kg N/A*

Top-Pac Chippings - Red 25kg N/A**Not Applicable because yield is dependent upon the thickness applied - call 01252527000 for more information

CMS Bitumous Repair

CMS Bituminous Repair MaterialsRoadmaster SMAThe HAPAS and BBA approved Permanent Cold-Lay Surfacing Material (PCSMs) and is ideal forfirst time permanent reinstatements of utilities excavations; Water, Gas, Electricity andTelecommunications.

PathmasterA HAPAS and BBA approved permanent cold lay reinstatement material for use on footways andcycle tracks. Available in plastic sacks.

RepairMasterHigh performance bituminous repair is a permanent first time reinstatement wearing course torepair potholes, cracks and broken areas of any shape, depth or size in macadams/asphaltwithout the need for cutting out.

EdgemasterAn emulsion based bituminous aerosol can. Easy to use, adhering to ironwork and concreteenabling the smallest repairs to be completed effectively.

Top-Pac Cold Lay MacadamFormulated to provide a readily available means of carrying out quick repairs to car parks orfootpaths or to create access ramps. Also as a base for reinstating trench excavations.

Top-Pac Pre-Coated ChippingsThe choice of professionals for patching and repairs to hot rolled asphalt surfaces. To suitpathways, main roads, high speed carriageways, trunk roads and motorways.Available in black or red.

Type Size (kg) Yield (litres/kg)

Roadmaster Rapid Mortar 25 12.5/25

Roadmaster Ultra Mortar 25 11.9/25

Roadmaster Mortar ExCel 25 11.18/25

Roadmaster Polar Mortar 25 11.7/25

CMS Mortars - High Early Strength

CMS Mortars - High Early StrengthRoadmaster Rapid MortarIntended for bedding applications that require high early strength to help reduce constructionand road closure time when bedding in inspection chamber frames and covers, gully grates,stanchion posts and street furniture.

Roadmaster Ultra MortarA rapid setting general purpose bedding mortar. Typical uses include bedding in manhole coversand frames, gully grates and frames, fixing in fence posts, signposts and street furniture.

Roadmaster Mortar ExCeLA rapid hardening, shrinkage compensated, easy to apply mortar. Uses include sealing of sightholes, telecommunication hatches, surface boxes, bedding in traffic signs, manhole covers, gullyframes and similar urban equipment.

Roadmaster Polar MortarIntended for bedding applications that require high early strength. Compatible for use withconcrete, brick and stone substrates in below ambient temperatures.


ConcreteRepair

&Protection

CMS CementsRoadmaster PQ-X CementA quick setting ultra rapid hardening cement for use in the repair of airfield and highways,concrete pavements, car park decks, the replacement of industrial floor slab, and marinestructures where working time is limited.

Roadmaster LTBCBA quick setting, ultra rapid hardening, anti-shrinkage cement allowing quick reinstatement andaccurate alignment of signs, posts, poles and shelters.

Portland 6588 CementCan be used on all concreting applications and provides enhanced strength and durability, easyof placing and finishing, used instead of SRPC to offer sulphate resistance with real economy.

80/20 OPCan be used on all concreting applications. 80/20 OP is a blend of selected and quality controlledpulverised fuel ash and ordinary Portland cement for general concreting, rendering, floorscreeding, paths, drives and bricklaying mortars.

NG CementA general purpose Portland cement. Main benefits include improved surface finish, greater longterm strength, improved durability and reduced shrinkage. Used by both casual DIY andprofessional builder for general concreting, rendering, floor screeding, paths, drives andbricklaying mortars. 32N/mm2 @ 28 days.

Type Size (kg) Yield

Roadmaster PQ-X Cement 25 N/A*

Roadmaster LTBCB 25 N/A*

Portland 6588 Cement 25 N/A*

80/20 OP 25 13 litres/25kg

NG Cement 25 N/A** Not Applicable because yield is dependent upon the thickness applied - call 01252527000 for more information.

CMS Cements

CMS Concretes - High Early StrengthCemrok 40General dry spraying applications where a moderate to high strength is required.

Roadmaster Concrete ExCeLA pre-blended, pourable, high strength, rapid setting, flowing, shrinkage compensated concretedesigned as a permanent emergency patching material when bedded in street furniture,ironwork and lamp posts. Also for structural repairs of concrete runways, carriageways andbridge decks.

Roadmaster Concrete 2000A pre-blended, rapid setting concrete for applications that include reinstatements in paths andconcrete drives. To compliment the Roadmaster range of bedding mortars.

Roadmaster Concrete PFA rapid hardening concrete containing special cements and graded aggregates. Used for fixing ofposts, lighting columns and road signs to significantly reduce damage when posts are newlyfixed.

Roadmaster Concrete GPA pre-blended one-part rapid setting concrete used for the backfill of carriageway ironwork, postand barrier erection or bridge deck repair.

Top-Pac Universal ConcreteReady formulated for a perfect blend to produce a good quality concrete. For general buildingand DIY projects such as light foundation work, footings, ramping, steps and paths etc.


ConcreteRepair

&Protection

Type Size (kg) Yield (litres/kg)

AG ‘RoMAG’ Summer 25 15/25

AG ‘RoMAG’ Winter 25 16/25

Supapoint 25 17/25

CMS Grouts - Repair

CMS Grouts - RepairRoadmaster AG 'RoMAG' (Summer grade)A free flowing, non-shrink, high strength grout for use with open textured macadam to providea composite topping that gives the combined advantages of a concrete slab and asphalt surface.

Roadmaster AG 'RoMAG' (Winter grade)A free flowing, non-shrink, high strength grout for use with open textured macadam to providea composite topping that gives the combined advantages of a concrete slab and asphalt surface.

Roadmaster SupapointA high strength, shrinkage compensated, easy to apply, flowing grout, designed for use wheretime is at a premium. Applications include the pointing of granite sets.

CMS Pozament Cemrok Dry & Wet Spray Mortars & Concretes are available on request.

Tarmac PatchfillA protein free, single component quick setting screed which is obtained by mixing a factorypreblended formulation of high quality raw materials with water. Tarmac Patchfill will infilldamaged or worn floors or substrates prior to application of an underlayment such as TarmacLeveller. Absorbent sub-floors may require sealing with Concrete Primer A.

Tarmac Tuf TopA free flowing, protein free, self-smoothing industrial grade flooring system. Suitable forapplication thicknesses from 7mm to 20mm. Substrate priming should be carried out by twocoats of Concrete Primer A.

Tarmac Tuf BaseA free flowing, protein free, self-smoothing industrial flooring underlayment system. Suitable forapplication thicknesses from 7mm to 60mm. Substrate priming should be carried out by twocoats of Concrete Primer A.

Type Size Yield

Tarmac Patchfill 25kg 3.3m2/25kg (@ 5mm thick)

Tarmac Leveller 25kg 14.50m2/1mm/1 Coat

Concrete Primer A 5, 10, 25 litres 0.15 litres/m2

Tuf Top 25kg 1.7kg/m2/mm

Tuf Base 25kg 1.7kg/m2/mm

Tarmac

For our range of CMS Pozament flooringscreeds, see the Flooring & Tiling sectionpage 163

Type Size (kg) Yield

Cemrok 40 25 80kg/m2 (@ 40mm thickness)

Roadmaster Concrete ExCel 25 11.75 litres/25kg

Roadmaster Concrete 2000 25 11.75 litres/25kg

Roadmaster Concrete PF 25 12.35 litres/25kg

Roadmaster Concrete GP 25 12 litres/25kg

Top-Pac Universal Concrete 25 11 litres/25kg

CMS Concretes - High Early Strength


ConcreteRepair

&Protection

Ronafix Mix DesignApplication Mix Thickness/notes

Floor screeds and screed repairs A 6mm - 50mm

Floor screeds and screed repairs A1 26mm+

Floor toppings and topping repairs B 15mm – 25mm

Floor toppings and topping repairs B1 26mm+

Floating floor screeds F 35mm+

Concrete repair D over reinforcing steel

Concrete repair A no reinforcing steel

Renders E watertight and tanking

Renders A waterproof

Bedding brick slips, copings C 6mm - 12mm typical

Fine concretes G 25mm+ typical

Slurry coats SC 1mm - 3mm typical

Mix Designs Cement Medium 6-3mm 10-5mm 10-5mm Ronafix Water Yield m3 Coveragesharp granite pea granite (approx) (approx) (approx)sand chips shingle chips

A By weight 50kg 125kg - - - 9 litres 9 litres 0.1 10m2 @10mm

By volume 1 2 - - - 1:1 with water - - -

A1 By weight 50kg 150kg - - - 4.5 litres 14 litres 0.1 10m2 @10mm

By volume 1 2.5 - - - 1:3 with water - - -

B By weight 50kg 75kg 75kg - - 9 litres 9 litres 0.1 10m2 @10mm

By volume 1 1.25 1.25 - - 1:1 with water - - -

B1 By weight 50kg 75kg - - 75kg 4.5 litres 14 litres 0.1 7m2 @15mm

By volume 1 1.25 - - 1.25 1:3 with water - - -

C, D By weight 50kg 125kg - - - 14 litres 4 litres 0.1 10m2 @10mm& E

By volume 1 2 - - - 3:1 with water - - -

F By weight 50kg 150kg - - - 4.5 litres 13.5 litres 0.1 10m2 @10mm

By volume 1 2.5 - - - 1:3 with water - - -

G By weight 50kg 100kg - 100kg - 4.5 litres 14 litres 0.14 5.6m2 @25mm

By volume 1 1.5 - 1.5 - 1:3 with water - - -

Slurry By weight 50kg 50kg - - - 35 litres - 0.1 105 - 122m2

Coat

By volume 1 1 - - - - - - -

Application Cement (kg) C/M Sharp Sand (kg) 3-6mm Granite Chips (kg) Nitobond SBR (litres) Water (litres) approx Recommended Thickness (mm)

Patching & repair mortar 50 150 - 10 8 6 - 40

Heavy duty floor screed* 50 75 75 10 6 10 - 40

Render* 50 150 - 10 6 6 - 9

Bonding mortar** for slip 50 125 - 10 7 6 - 40bricks/tiles etc.

Nitobond SBR Mix DesignFor a technical data sheet with further information, please contact your branch.

*Should be of a semi-dry cohesive consistency.**Water is adjusted to give a firm mortar. For fine joints, use grade M/F sand. Support where necessary until the mortar is set.Note that these mix designs are based on the use of dry sand and aggregate. Adjustments must be made to the water demand relative to themoisture content of the sand and aggregate used. Due to inconsistencies of site-stored materials and variable conditions, actual results may differfrom those published above.

08. concrete repair & protection

Documents

repair medium

repair material

repair problems

drying repair mortar

formulated repair mortar

repair mortar mixes

repair of exceptional

cementitious repair