06 - breezemax -basic commissioning bs - 09-11-16 - ver
DESCRIPTION
COMISIONAMIENTO BASICO ENLACE ALVARIONTRANSCRIPT
-
System Commissioning Base Station
Copyright Alvarion Ltd.
-
2Objectives
Upon completion of this module students will know the following: Basic system commissioning parameters
Ver. 09-04-15
-
3Basic Commissioning Parameters
The minimum obligatory parameters for commissioning: Base station
Cell Operator ID & Cell ID Duplex DL-UL ratio
Cluster a virtual entity only for management purposes ID , Name , Location , Heading , beam width
Ver. 09-04-15
ID , Name , Location , Heading , beam width AU ODU
ID ,associated cluster ,frequency Band ,admin status AU IDU
MAC sector id , Max cell radius PHY band width Multi channel associated ODU ,frequency ,admin status
-
4Base Station Configuration IP Address
Ports IP address(via NPU) In order to establish telnet connection
IP Address xxx.xxx.xxx.xxx Subnet Mask xxx.xxx.xxx.xxx
xxx = 0-255 Gateway - Management VLAN ID - 0-4094
-
5Base Station Configuration
Base station (via NPU) Cell :
operator id = XXX.XXX.XXX cell id = XXX.XXX
XXX = 0-255 Duplex :
Mode : 1= FDD; 2 = TDD DL-UL ratio = 1-7 DL-UL ratio = 1-7
1 = 65%-35% 7 = 35%-65%
-
6DL-UL Ratio
Defines the ratio of transmit (Down Link) time to receive (Up Link) time, in percents
Configured for the whole BS Default is 50-50 Changes after reset DL-UL Ratio 60-40(%)
DL Frame UL Frame
Ver. 09-04-15
DL-UL Ratio 50-50(%)DL Frame UL Frame
-
7Cluster Configuration
Cluster (via NPU) Radio Cluster ID (1 to 6)
(Radio Cluster) Name string
(Radio Cluster) Location string
Sector Heading (0-359) Sector Heading (0-359)
Sector Beam Width (0-359)
-
8ODU Configuration
ODU (via NPU) ODU ID (1 to 24)
Associated Radio Cluster
Configured ODU Frequency Band (1 - 18 press tab for bands )
TX Power : 13 50 dBm TX Power : 13 50 dBm
Admin Status : 1 = disable ; 2 = enable
-
9AU IDU Configuration
AU IDU MAC :
Sector id = 1 - 255 Max cell radius in Km
PHY Band width in MHz: 1=1.75 MHz, 2=3.5
MHz, 3=5 MHz, 4=7 MHz, 5=10 MHz Multi channel
Associated ODU ID : 1-24 Frequency in MHz Admin status : 1=disable 2=enable
-
10Max Cell Radius
Adapt various timing parameters of the MAC to the time it takes a message to reach its destination
For Non-Line-Of-Sight (NLOS) Typically adding 10% At 3.5 MHz, 10 to 50 km At 5 MHz, 7 to 45 km Changes effect after AU reset
Contention period:
new SU
new SUnew SU
Ver. 09-04-15
Contention period.
Contention period:SU initial network entry used for registering new SU the size is changing according to the Max Cell Radius
new SU
UL-Frame
-
11Switching Mode
The Switching Mode parameter defines the convergence sub-layer (CS) used in the network infrastructure.
Ethernet CS is applicable to the current generation of layer 2 based services.
IP CS Switching Mode is IP CS Switching Mode is compatible with the 802.16e standard
The default Switching Mode is Ethernet CS.
Select 1 for Ethernet CS OR 2 for IP CS
Change will take effect after NPU reset
-
12BS Basic Commissioning
Overview of the BS Basic Commissioning
-
13Basic communication (Ethernet CS )
Service mode From the main menu choose 7 (services) From the services menu choose 1 (General) In the update menu choose 1(service mode) Choose 2 for quick mode
-
14Basic communication (Ethernet CS )
Service mode From the main menu choose 7
(services) From the services menu choose 1
(General) In the update menu choose 2
(Default L2/Voice Profile) Enter the name (string) of an
existing L2 or Voice service profileexisting L2 or Voice service profile
-
Thank You