INDEX

Pentek filter housings Big Blue® & Big Clear .................................................................................................... 3Pentek pleated sediment Cartridges ECP Series ............................................................................................... 4Pentek pleated sediment Cartridges R Series .................................................................................................... 5Pentek sediment Cartridges Polydepth Series ................................................................................................... 6Pentek sediment Cartridges DGD Series dual gradient density ....................................................................... 7Pentek sediment Cartridges CW/WP Series ....................................................................................................... 8Pentek activated carbon cartridges C series ...................................................................................................... 9Pentek carbon pleated Cartridges NCP Series .................................................................................................. 10Pentek activated granular Carbon Cartridges GAC Series ............................................................................. 11Pentek Carbon block Cartridges CBC Series ................................................................................................... 12Pentek Carbon block Cartridges EPM Series ................................................................................................... 13Pentek mixed bed deionization cartridges PCF Series .................................................................................... 14Pentek coconut shell Granular Activated Carbon (GAC) in line filters .......................................................... 15Pentek carbon block in line filters ..................................................................................................................... 16Pentek PH stabilizer (calcite & coconut shell carbon) post RO in line filters ................................................ 16Pentek Quick Change Filters .............................................................................................................................. 17

Pentek filter housings Big Blue® & Big ClearCode: 02002007

Pentek Big Blue® Buna-N O-ring (1)

Code: 09505001

Pentek filter housings Big Blue® & Big Clear 10", 20" - IN/OUT3/4", 1", 1-1/2"

FeaturesDimensions 10" - IN/OUT 3/4": 13-1/8" x 7-1/4" (333 mm x 184 mm)Initial psi @ Flow Rate (gpm) 10" - 3/4": 2 psi @ 15 gpm (0.1 bar @ 57 Lpm)Housing Big Blue: PolypropyleneCap: Polypropylene (HFPP)Button Assembly: 300-series Stainless Steel, EPDM, and PolypropyleneO-ring: Buna-NTemperature Rating: 100ºF (37.8ºC) max.Maximum Pressure 10": 100 psi (6.9 bar)

VariantsCode Description09505001-01 Pentek filter housings Big Blue® 10" - IN/OUT 3/4" NPT, with pressure relief (6)09505001-02 Pentek filter housings Big Blue® 10" - IN/OUT 1" BSP, with pressure relief (6)

• Large capacity housing suitable for high flow applications• 10" and 20" lengths available in opaque and clear• Pressure relief/bleed on inlet side of cap• Accepts 41/2" diameter cartridgesBig Blue® Filter Housings offer the versatility to meet all of your large-capacity filtration needs, includinghigh-flow and heavy-sediment applications. The extra large housing allows for greater cartridge capacity,reducing the number of vessels required for high flow-rate applications. Sumps are constructed of durablereinforced polypropylene and are available in both 10" and 20" lengths. The high-flow polypropylene(HFPP) cap is available with 3/4", 1" or 1½" NPT inlet and outlet ports. The 1¼" internal port allows agreater volume of liquid to pass through the HFPP cap more rapidly. Big Blue® housings are compatiblewith a broad range of chemicals and are available with or without a pressure relief button. They accept awide variety of 4½" diameter cartridges. Big Clear Filter Housings offer on-site examination of flow,performance, and cartridge life and are ideal for a variety of applications. The blue polypropylene caps are

05 September 2016 3/19

available with an optional pressure-relief button on the inlet side to relieve pressure inside the housingwhen changing filter cartridges.

Pentek pleated sediment Cartridges ECP SeriesCode: 09515001

Pentek Pleated polyester/cellulose sediments cartridges ECPSeries 9-3/4", 20", 9-3/4"BB, 20"BB - 1, 5, 20, 50 micron

FeaturesInitial psi@Flow Rate(gpm) ECP5-10: <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)Initial psi@Flow Rate(gpm) ECP5-10BB:<1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)Filter Media: Cellulose PolyesterCore: PolypropyleneEnd Caps: Vinyl PlastisolTemperature Rating: 40 - 125ºF (4.4 - 51.7ºC)Endcap Color ECP5-10: White

VariantsCode Description09515001-02 Pentek ECP5-10 pleated polyester cartridge 2-7/8" x 9-3/4" (67 mm x 248 mm) - 5 micron (24)09515001-10 Pentek ECP5-10BB pleated polyester cartridge 4-1/2" x 9-3/4" (114 mm x 248 mm) - 5 micron (8)

ECP Series Pleated Cellulose Polyester Cartridges• Replaces CP and HFCP Series cartridges• Special formulation of resin-impregnated cellulose and polyester fibers• Provides higher wet strength than regular cellulose cartridges• Minimal unloading and media migrationECP Series cartridges are manufactured from a special formulation of resin-impregnated cellulose andpolyester fibers. This unique blend of materials provides a higher wet strength than regular cellulosecartridges. It also provides high flow rates and dirt-holding capacity, while maintaining extremely lowpressure drop. The media is pleated around a polypropylene core for added strength and the ends areimmersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in thisfashion fuses the components together forming a unified endcap and gasket. ECP Series cartridge endcapsfeature a color-coding system for easy identification of micron ratings: Tan (1-micron), White (5-micron),Blue (20-micron), Yellow (50-micron). ECP cartridges contain more media surface area than mostcompetitive cartridges. The standard 10-inch ECP cartridge contains six square feet of media, where mostcartridges contain only 4.5 square feet. Other available ECP cartridge sizes contain the following amount ofmedia:• Standard 20-inch cartridge – 12 ft2• 10-inch big BB cartridge – 18 ft2• 20-inch big BB cartridge – 36 ft2

05 September 2016 4/19

Pentek pleated sediment Cartridges R SeriesCode: 09516001

Pentek Pleated polyester/cellulose sediments cartridges RSeries 9-3/4", 20", 9-3/4"BB, 20"BB - 20, 30, 50 micron

FeaturesInitial psi @ Flow Rate (gpm) R30: <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)Initial psi @ Flow Rate (gpm) R50: <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)Initial psi @ Flow Rate (gpm) R30-BB: <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)Initial psi @ Flow Rate (gpm) R50-BB: <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)Initial psi @ Flow Rate (gpm) R30-20BB:<1 psi @ 20 gpm (<0.1 bar @ 76 L/min)Filter Media: Non-Woven PolyesterEnd Caps: Vinyl PlastisolCore: PolypropyleneTemperature Rating: 40 - 125ºF (4.4 - 51.7ºC)

VariantsCode Description09516001-R3020BB Pentek R30-20BB pleated polyester cartridge 4-1/2" x 20" (114 mm x 508 mm) - 30 micron (6)09516001-R30 Pentek R-30 pleated polyester cartridge 2-7/8" x 9-3/4" (67 mm x 248 mm) - 30 micron (24)09516001-R30BB Pentek R30-BB pleated polyester cartridge 4-1/2" x 9-3/4" (114 mm x 248 mm) - 30 micron (8)09516001-R50 Pentek R-50 pleated polyester cartridge 2-7/8" x 9-3/4" (67 mm x 248 mm) - 50 micron (24)09516001-R50BB Pentek R50-BB pleated polyester cartridge 4-1/2" x 9-3/4" (114 mm x 248 mm) - 50 micron (8)

R SERIES PLEATED POLYESTER CARTRIDGES• Pleated design maximizes dirt-holding capacity• Versatile and reusable, allowing for a variety of uses• Durable polyester media is bacteria and chemical resistant• Nominal 30-micron rating (R30) and nominal 50-micron rating (R50)R Series cartridges are manufactured from a durable, non-woven and reusable polyester fabric that issuitable for a wide range of filtration uses. The media is pleated around a polypropylene core for addedstrength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end ofthe pleat in this fashion fuses the three components together forming a unified end cap and gasket. Theoverlap seam is sonically welded to reduce internal bypass improving filtration efficiency. The standard9-3/4” length cartridge has more than four square feet of polyester fabric, while the larger Big Blue®version has more than 16 square feet. The media is pleated to maximize dirt-holding capacity and extendthe time period between changes or cleaning. R Series cartridges are resistant to both bacteria andchemical attack making them suitable for a variety of residential, commercial and industrial applications.

05 September 2016 5/19

Pentek sediment Cartridges Polydepth SeriesCode: 09519001

Pentek sediments cartridges Polydepth series 9-7/8", 20", 30",40" - 1, 5, 10, 25, 50 micron

FeaturesInitial psi @ Flow Rate (gpm) PD-10-20:<2 psi @ 5 gpm (<0.14 bar @ 19 Lpm)Initial psi @ Flow Rate (gpm) PD-5-30: <2 psi @ 7 gpm (<0.14 bar @ 26.5 Lpm)Filter Media: PolypropyleneTemperature Rating: 40 - 175ºF (4.4 - 79.4ºC)

VariantsCode Description09519001-08 Pentek PD-10-20 polydepth Melt blown polypropylene cartridge 2-1/2" x 20" (64 mm x 510 mm) - 10 micron (20)09519001-12 Pentek PD-5-30 polydepth Melt blown polypropylene cartridge 2-1/2" x 30" (64 mm x 763 mm) - 5 micron (20)

POLYDEPTH® SERIES POLYPROPYLENE CARTRIDGE• Thermally bonded polypropylene micro-fiber construction for higher filtration efficiency• Consistent flow rate and superior filtration performance• Available in a wide range of micron ratings and lengths• Will not impart taste, odor or color to water being filtered• Ideal for a wide variety of industrial filtrationThe POLYDEPTH® filtration cartridge is constructed of thermally bonded polypropylene microfibers toensure high efficiency. The filter incorporates a rigid polypropylene center core for increased collapsestrength and durability. This thermal bonded micro-fiber construction has minimal fiber release, consistentflow rate and superior filtration performance. It also is not brittle or prone to breakage problems like resin-bonded cartridges. Unique micro-grooves provide added surface area. The polydepth cartridge will notimpart taste, odor or color to the liquid being filtered, which makes it ideal for food and beverageapplications. The recommended temperature limit of 40ºF to 175ºF (4.4ºC to 79.4ºC) allows it to be used inmany hot water applications. Additionally, the polypropylene construction provides superior chemicalresistance and is not prone to bacterial attack. Available in different lengths from 93/4" up to 40". Unlikecompetitive cartridges, the longer lengths are not manufactured by gluing shorter cartridges together. Theyare continuous cartridges that cannot separate during use and do not sacrifice filtering surface area.POLYDEPTH cartridges are available in various micron ratings including 1-, 5-, 10-, 25-, and 50-microns.WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequatedisinfection before or after the system.

05 September 2016 6/19

Pentek sediment Cartridges DGD Series dual gradient densityCode: 09520001

Pentek sediments cartridges Dual-Gradient Density DGD Series9-3/4"BB, 20"BB - 75 to 1 micron

FeaturesInitial psi @ Flow Rate DGD-5005: <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)Initial psi @ Flow Rate DGD-7525: <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)Initial psi @ Flow Rate DGD-5005-20: <1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)Filter Media: PolypropyleneTemperature Rating: 40 - 145ºF (4.4 - 62.8ºC)

VariantsCode Description09520001-02 Pentek DGD-5005 polypropylene cartridge 4-1/2" x 10" (114 mm x 254 mm) - 50/5 micron (8)09520001-03 Pentek DGD-7525 polypropylene cartridge 4-1/2" x 10" (114 mm x 254 mm) - 75/25 micron (8)09520001-05 Pentek DGD-5005 polypropylene cartridge 4-1/2" x 20" (114 mm x 508 mm) - 50/5 micron (6)

DGD Series Dual-Gradient density cartridges• Manufactured from pure 100% polypropylene• Designed for purity and chemical compatibility• Spun fibers form a true gradient density from outer to inner surfacesDGD Series cartridges are manufactured from 100% pure polypropylene and are sized for use in our BigBlue® filter housings. DGD Series cartridges are designed for purity and will not impart taste, odor or colorto the liquid being filtered. Additionally, the polypropylene construction provides superior chemicalresistance and is not prone to bacterial attack. The DGD Series' advanced design combines selective finalfiltration with appropriate pre-filtration to achieve up to three times the dirt-holding capacity of similar sizesediment cartridges and even greater capacity than standard spun or string-wound cartridges. Thisperformance enhancement is achieved by combining two separate gradient layers in one filter. The largerdiameter of the pre-filter reduces the particle load to the post filter, allowing it to operate at higher velocities.The effective filter depth is increased to a full 233% of standard spun-polypropylene or string-wound filters.This increased depth provides for very high particulate reduction efficiencies and added loading capacity.The unique design and performance characteristics of the DGD Series cartridges make them an excellentchoice for all residential, rural, municipal and commercial applications.

05 September 2016 7/19

Pentek sediment Cartridges CW/WP SeriesCode: 09521002

Pentek Polypropylene Wound sediments cartridges CW/BSWPSeries 10"BB, 20"BB - from 50 to 5 micron

FeaturesFilter Media: PolypropyleneCore: PolypropyleneTemperature Rating: 40 - 165ºF (4.4 - 73.9ºC)

VariantsCode Description09521002-02 Pentek BSWP5P10 Polypropylene Wound cartridge 10" - 5 micron (8)09521002-03 Pentek BSWP10P10 Polypropylene Wound cartridge 10" - 10 micron (8)09521002-05 Pentek WP50P9.8BB Polypropylene Wound cartridge 9-7/8" - 50 micron (12)09521002-09 Pentek BSWP5P20 Polypropylene Wound cartridge 20" - 5 micron (6)09521002-10 Pentek BSWP10P20 Polypropylene Wound cartridge 20" - 10 micron (6)

• String-wound design reduces fine sediment from a variety of fluids• Withstands temperatures up to 165° F (73.9° C)• Economically priced

CW and WP Series cartridges are manufactured from a durable polypropylene cord that is wound around arigid polypropylene core. They are an economical solution to reduce fine sediment, including sand, silt, rustand scale particles. CW cartridges are very economical and wound in a standard pattern around the core.They are available in 10, 30 and 50-micron ratings. WP Series cartridges are wound in a precise patternaround the core providing greater surface area. The result is higher dirt-loading capacity and greaterefficiency than standard wound cartridges like the CW.Both of these string-wound cartridge styles are capable of withstanding temperatures up to 165° F(73.9°C), and will accommodate flow rates between 10 and 20 GPM (38lit./min. e 76 lit./min.) with minimalpressure drop. CW and WP Series cartridges are suitable for a wide variety of sediment filtrationapplications, including municipal and well water as well as many industrial fluids.

Size10"BB: (4,63"x10" * 118x256mm.)20"BB: (4,63"x20" * 118x511mm.)

05 September 2016 8/19

Pentek activated carbon cartridges C seriesCode: 09523001

Pentek dual purpose powdered-activated carbon cartridges CSeries 5", 9-3/4", 20" - 1, 5 micron

FeaturesInitial psi @ Flow Rate (gpm) C2: 2.0 psi @ 2 gpm (0.1 bar @ 7.6 Lpm)Capacity C2: >1250 gallons @ 0.5 gpm (>4700L @ 1.9 Lpm)Filter Media: PAC Impregnated CelluloseEnd Caps: Vinyl Plastisol (C1-C2) / Polypropylene (C8)Netting: PolyethyleneCore: PolypropyleneReinforcement Backing: Poliestere (C8) Cellulosa Poliestere (C1-C2)Gasket: Buna-NTemperature Rating (C1, C2, C1-20): 40 - 125ºF (4.4 - 51.7ºC)Temperature Rating (C8): 40 - 145ºF (4.4 - 62.8ºC)

VariantsCode Description09523001-C2 Pentek C2 Activated Carbon-Impregnated Cellulose cartridge 2-1/2" x 4-7/8" (64 mm x 124 mm) - 5 micron (24)

C SERIES DUAL PURPOSE POWDERED-ACTIVATED CARBON CARTRIDGES• Economically priced• Provides sediment filtration, bad taste & odor and chlorine taste & odor reduction*• High dirt-holding capacity• Available in three sizes and two micron ratings• Recommended for chlorinated water suppliesC Series cartridges offer an economical solution for all of your general-purpose water filtration needs.Constructed of a carbon impregnated cellulose media, these dual-purpose cartridges filter out fine sedimentparticles and reduce unwanted taste, odor and chlorine taste and odor from your tap water.* A polyesterreinforcement backing and external netting provide additional strength and dirt-loading capacity. C Seriescartridges are available in three different sizes and two (2) different micron ratings. Both the C1 and C2 arenominally rated at 5-microns, the C8 is nominally rated at 1-micron. These dual-purpose cartridges are wellsuited for a wide range of residential applications, and make excellent polishing filters when used inprocess or closed-loop streams.* Based on manufacturer’s internal testing.

05 September 2016 9/19

Pentek carbon pleated Cartridges NCP SeriesCode: 09524001

Pentek Pleated Carbon Impregnated Polyester cartridges NCPseries 9-3/4", 20", 9-3/4"BB, 20"BB - 10 micron

FeaturesInitial psi @ Flow Rate (gpm) NCP-BB: 2 psi @ 8 gpm (0.1 bar @ 30 Lpm)Capacity NCP-BB: 500 gallons @ 2 gpm (1890L @ 7.6 Lpm)Initial psi @ Flow Rate (gpm) NCP-20: 2 psi @ 5 gpm (0.1 bar @ 19 Lpm)Capacity NCP-20: 450 gallons @ 2 gpm (1700L @ 7.6 Lpm)Filter Media: Pleated Carbon-Impregnated PolyesterEnd Caps: Vinyl PlastisolNetting: PolypropyleneCore: PolypropyleneTemperature Rating: 40 - 125ºF (4.4 - 51.7ºC)

VariantsCode Description09524001-02 Pentek NCP-BB Pleated Carbon Impregnated Polyester cartridges 4-1/2" x 9-3/4" - 10 micron (8)09524001-03 Pentek NCP-20 Pleated Carbon Impregnated Polyester cartridges 2-1/2" x 20" - 10 micron (14)

NCP SERIES NON-CELLULOSE CARBON IMPREGNATED PLEATED CARTRIDGES• Non-cellulose media resists bacterial attack.• Provides sediment filtration and chlorine taste & odor reduction.• Pleated for maximum dirt-loading capacity.• Nominal 10-micron rating.NCP Series cartridges are constructed from a carbonimpregnated non-cellulose media. They offersediment-filtration, as well as taste, odor and chlorine taste and odor reduction in one cartridge. Unlikecellulose cartridges, NCP Series cartridges are resistant to bacterial attack allowing them to be used formunicipal and nonchlorinated water applications. Pleats provide additional surface area for high dirt-loadingcapacity, while maintaining minimal pressure drop. This combination of a pleated polyester media andcarbon filtration produces an outstanding filter cartridge with extended service life. NCP Series cartridgesare excellent polishing filters, closed loop streams and are ideal for post reverse osmosis and well waterapplications.* Filtration efficiency and chlorine taste and odor reduction efficiency are reduced at higher flow rates.Chlorine taste and odor reduction based on greater than 50% reduction using 2ppm free chlorine feedconcentration at 68ºF (20ºC) at continuous flow.

05 September 2016 10/19

Pentek activated granular Carbon Cartridges GAC SeriesCode: 09526001

Pentek granular Carbon Cartridges GAC Series 9-3/4", 20"

FeaturesInitial psi @ Flow Rate (gpm) GAC20: 16 psi @ 2.0 gpm (1.1 bar @ 7.6 Lpm)Capacity GAC-20: 10,000 gallons @ 2.0 gpm (37,800L @ 7.6 Lpm)Filter Media: Granular Activated Carbon GACEnd Caps: PolystyrenePost-Filter: Spun PolypropyleneOuter Casing: PolystyreneExpansion Pad: PolypropyleneGasket: Buna-N (top) - Santoprene™ (bottom)Temperature Rating: 40 - 125ºF (4.4 - 51.7ºC)

VariantsCode Description09526001-08 Pentek GAC20 granular carbon cartridge 2-7/8" x 20" (73 mm x 508 mm) (6)

GAC SerieS granular activated carbon cartridges• effective bad taste & odor and chlorine taste & odor reduction*• designed for maximum adsorption• Post-Filter to reduce carbon fines• Available in a variety of sizes and flow ratesGAC Series cartridges effectively reduce unwanted tastes, odor and chlorine taste & odor from yourdrinking water.* They are designed to allow maximum contact between the water and carbon, ensuringmaximum adsorption. The construction of the cartridge allows water to enter at one end and pass throughthe entire length of the carbon bed before exiting the other end of the cartridge, while an internal expansionpad minimizes channeling or bypass. Before the water exits the cartridge, a 20-micron post filter helpsreduce carbon fines and other suspended particles from the filtered water. The post-filter is permanentlyfastened to an innovative support basket ensuring that it is firmly secured and eliminating any potential forbypass. GAC Series cartridges are available in a variety of sizes and flow rates, and effectively providegood general-purpose drinking water filtration.* Based on manufacturer’s internal testing.

05 September 2016 11/19

Pentek Carbon block Cartridges CBC SeriesCode: 09532002

Pentek Carbon block Cartridges CBC Series 5", 9-3/4", 20",9-3/4"BB, 20"BB - 0,5 micron

FeaturesInitial bar @ Flow Rate CBC-5: 0.48 bar @ 3.8 LpmCapacity CBC-5: 11.400 L @ 3.8 LpmInitial bar @ Flow Rate CBC-10: 0.23 bar @ 7.6 LpmCapacity CBC-10: 75.700 L @ 7.6 LpmInitial bar @ Flow Rate CBC-20: 0.21 bar @ 7.6 LpmCapacity CBC-20: 170.300 L @ 7.6 LpmInitial bar @ Flow Rate CBC-10BB: 0.32 bar @ 7.6 LpmCapacity CBC-10BB: 189.300 L @ 7.6 LpmInitial bar @ Flow Rate CBC-20BB: 0.38 bar @ 15.1 LpmCapacity CBC-20BB: 567.800 L @ 15.1 LpmFilter Media: Bonded PACEnd Caps: PolypropyleneOuter Wrap: PolyolefinNetting: PolyethyleneGasket: Buna-NTemperature Rating: 40 - 180ºF (4.4 - 82.2ºC)

VariantsCode Description09532002-05 Pentek CBC-5 Carbon Block cartridge 2-7/8" x 4-7/8" (73 mm x 124 mm) - 0,5 micron (24)09532002-10 Pentek CBC-10 Carbon Block cartridge 2-7/8" x 9-3/4" (73 mm x 248 mm) - 0,5 micron (12)09532002-10BB Pentek CBC-10BB Carbon Block cartridge 4-5/8" x 9-3/4" (118 mm x 248 mm) - 0,5 micron (4)09532002-20 Pentek CBC-5 Carbon Block cartridge 2-7/8" x 20" (73 mm x 508 mm) - 0,5 micron (6)09532002-20BB Pentek CBC-5 Carbon Block cartridge 4-5/8" x 20" (118 mm x 508 mm) - 0,5 micron (4)

CBC SERIES CARBON BLOCK CARTRIDGES• Nominal 0,5 micron rating*• 99,5% reduction of Cryptosporidium, Giardia*• Premium high capacity bad taste & odor and chlorine taste & odor reduction*• Enhanced dirt holding capacity*

CBC Series cartridges are highly effective at reducing unwanted taste, odor and chlorine: taste & odor, frompotable drinking water. The unique structure of the carbon block enables it to reduce Giardia,Cryptosporidium, Entamoeba, and Toxoplasma cysts and fine sediment particles down to 0,5 microns.*CBC Series cartridges are manufactured using a patented process and made entirely from FDA-compliantmaterials. They are an ideal choice for a wide range of residential, food service, commercial and industrialapplications. They also make excellent polishing filters or pre-filters in applications requiring fine filtrationand highcapacity.* Based on manufacturer’s internal testingNOTE: Performance capacity depends on system design, flow rate and certain other application conditions.Certain states require system registration or certification for health related contaminant reduction claims.WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequatedisinfection before or after the system.

05 September 2016 12/19

NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder) and a newcartridge after installation should be flushed with sufficient water toremove all traces of the fines from your water system before using the water. Each time you use yourfiltered water tap for drinking or cooking purposes it is recommended thatyou run (flush) the tap for at least 20 seconds prior to using water.NOTE: Micron ratings based on 85% or greater removal of given particle size.NOTE: CBC-Series cartridges are capable of reducing 99.95% of Cryptosporidium and Giardia cysts. Dataobtained from actual particle counts using AC Fine Test Dust andLatex spheres.Estimated capacity using 2ppm free available chlorine (FAC) with greater than 90% reduction.

Pentek Carbon block Cartridges EPM SeriesCode: 09532001

Pentek Carbon block Cartridges EPM Series 9-3/4", 20",9-3/4"BB, 20"BB - 10 micron

FeaturesInitial psi @ Flow Rate (gpm) EPM10: 1.5 psi @ 1 gpm (0.10 bar @ 3.8 Lpm)Capacity EPM-10: 3,000 gallons @ 1 gpm (11,400L @ 3.8 Lpm)Initial psi @ Flow Rate (gpm) EPM-20BB:4 psi @ 4 gpm (0.28 bar @ 15 Lpm)Capacity EPM-20BB: 30,000 gallons @ 4 gpm (113,500L @ 15 Lpm)Filter Media: Bonded PACEnd Caps: PolypropyleneOuter Wrap: PolyolefinNetting: PolyethyleneGasket: Buna-NTemperature Rating: 40 - 180ºF (4.4 - 82.2ºC)

VariantsCode Description09532001-10 Pentek EPM-10 Carbon Block cartridge 2-7/8" x 9-3/4" (73 mm x 248 mm) - 10 micron (12)09532001-20BB Pentek EPM-20BB Carbon Block cartridge 4-5/8" x 20" (118 mm x 508 mm) - 10 micron (4)

EPM series modified epsilon carbon-briquette cartridge.• Nominal 10-micron rating*• Enhanced dirt holding capacity for extended cartridge life*• Bad taste & odor and chlorine taste & odor reduction*• Lowest pressure drop• Economically pricedEPM Series cartridges are a modified version of our EP Series cartridge. An economical price makes thiscartridge suitable for taste, odor and chlorine taste & odor reduction, as well as sediment filtration.* EPMSeries cartridges are manufactured using a patented process that yields a cartridge with a nominal10-micron filtration rating, high porosity and chlorine taste & odor reduction. The high porosity design helpsprevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilizationof the carbon while maintaining low pressure drop. These cartridges are protected by Endurawrap®, auniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of thecartridge by trapping sediment that typically plugs carbon block cartridges. EPM Series cartridges aremanufactured entirely from FDA-compliant materials making them an ideal choice for a wide range ofresidential, food service, commercial and industrial applications. *Based on manufacturer’s internal testing.

05 September 2016 13/19

Pentek mixed bed deionization cartridges PCF SeriesCode: 09547001

Pentek mixed bed deionization cartridges series PCF 9-3/4",20", 20"BB

FeaturesInitial psi @ Flow Rate PCF1-10MB: 1.5 psi @ 0.25 gpm(0.10 bar @ 0.95 Lpm)Capacity Grains PCF1-10MB: 270 (17.500)Suggested Flow Rate PCF1-10MB: 0.25 gpm (0.95 Lpm)Initial psi @ Flow Rate PCF1-20MB: 3.4 psi @ 0.50 gpm (0.23 bar @ Lpm)Capacity Grains PCF1-20MB: (mg TDS as CaCO3) 600 (38,800)Suggested Flow Rate PCF1-20MB: 0.50 gpm (1.9 Lpm)Initial psi @ Flow Rate BBF1-20MB: 1.10 psi @ 1.25 gpm (0.076 bar @ 4.7 Lpm)Capacity Grains BBF1-20MB: (mg TDS as CaCO3) 1850 (120,000)Suggested Flow Rate BBF1-20MB: 1.25 gpm (4.7 Lpm)Filter Media: Mixed Bed DI ResinsEnd Caps: PolypropyleneShell: PolypropylenePre-filter: PolypropylenePost-filter: PolypropyleneGasket: Buna-NTemperature Rating: 40 - 100°F (4,4 - 37,8°C)

VariantsCode Description09547001-01 Pentek PCF1-10 MB mixed bed deionization cartridge 2-2/3" x 9-3/4" (68 mm x 248 mm) (6)09547001-02 Pentek PCF1-20 MB mixed bed deionization cartridge 2-2/3" x 20" (68 mm x 508 mm) (6)09547001-03 Pentek BBF1-20MB mixed bed deionization cartridge 4-1/2" x 20" (114 mm x 508 mm) (4)

PCF SERIES MIXED BED DEIONIZATION CARTRIDGES• Designed for deionizing water up to 16 megohms.• All materials and construction are FDA-compliant.• Three sizes and capacities.

PCF Series filter cartridges have been developed in response to the requirements for deionized water inmany industries.They are manufactured using an FDA-compliant resin that has been subjected to additional post-productionsteps to minimize the total organic carbon (TOC) level.These high-capacity, semi-conductor-grade resin cartridges are ideal for use in pharmaceutical and medicallaboratories, cosmetics, and circuit board printing applications.PCF Series cartridges are available in three sizes, flow rates and capacities. They are convenient and costeffective for many applications where low levels of total organic carbon (TOC) and total dissolved solids(TDS) are required.

Applications:• Circuit board printing • Pharmaceutical use • Steam and humidification • Cosmetics • Steam processors• Humidification systems • Recirculating/cooling towers • Power generating equipment •Medical/laboratory use • Lasers • Jet water sprayers • Boiler make-up water

05 September 2016 14/19

Typical Cartridge Properties and CharacteristicsFUNCTION STRUCTURE : Cation R-SO3-H+ * Anion AR-N(CH2)2(C2H2OH)+OH-PHYSICAL FORM: Moist spherical beadIONIC FORM: H/OHPERCENT CONVERSION: Hydrogen 95% minimum * Hydroxide 90% minimum

WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or ofunknown quality without adequate disinfection before or after the unit.NOTE: The above resin data is based on information obtained by Pentair Filtration, Inc. This data does notimply any warranty or performance guarantee. We recommend that the user determine performance bytesting on his own processing equipment. We assume no liability or responsibility for patent infringementresulting from the use of this product.CAUTION: Do not use cartridges on equipment that has an electric conductivity water level indicator.

Pentek coconut shell Granular Activated Carbon (GAC) in line filtersCode: 09557001

Pentek GS-10RO coconut shell Granular Activated Carbon(GAC) inline filter 1/4''FPT, 1/4"J.G. 2"x6", 2''x10'' - 5 micron(25)

FeaturesService life GS-10RO: 3,308 gallons (12,522L) max. 1 yearFlow rate: 0,5 gpm (1,9L/min)Temperature Rating: 40 - 100°F (4,4 - 37,8°C)Working pressure: 20-125 psi (1,4-8,62 bar)

VariantsCode Description09557001-03 Pentek GS-10RO coconut shell Granular Activated Carbon (GAC) inline filter 1/4''FPT 2''x10'' - 5 micron (12)09557001-04 Pentek GS-10RO coconut shell Granular Activated C. (GAC) inline filter 1/4'' J. Guest 2''x10'' - 5 micron (12)

The Series inline filters offer an extensive variety of products to meet your most challenging applications.PENTEK in-line filters are designed for use on any point of use drinking water appliance including reverseosmosis (RO) systems, distillation systems, food service equipment, bottleless water coolers, waterfountains, refrigerators and other water dispensing devices. The series in-line filtration features coconutshell granular activated carbon.

05 September 2016 15/19

Pentek carbon block in line filtersCode: 09558001

Pentek GS-10ULTRA-B KDF & coconut Bacteriostatic GACinline filter 1/4" John Guest 2"x6" - 5 micron (12)

FeaturesService life: 700 gallons (2,650L) max. 1 annoFlow rate: 0,5 gpm (1,9L/min)Working pressure: 20-125 psi (1,4-8,62 bar)

Pentek Traditional In-Line filters are designed to reduce unwanted taste, chlorine taste and odor.All Traditional In-Line filters include a durable, injection molded polypropylene body and cap, pre- and post-filter. They are pressure rated to 125 psi.Traditional In-Line filters are an ideal choice for post-RO, under-sink, ice-maker and food serviceapplications

Pentek PH stabilizer (calcite & coconut shell carbon) post RO in line filtersCode: 09559001

Pentek GS-10CAL/RO remineralizer PH adjustment in line filtercoconut (GAC) 1/4" FPT 2"x10" - 20 micron (12)

FeaturesService life: 2,000 gallons (7,570L) max. 1 annoFlow rate: 1,0 gpm (3,8L/min)Temperature Rating: 40 - 100°F (4,4 - 37,8°C)Working pressure: 20-125 psi (1,4-8,62 bar)

This Pentek GS-10CAL/RO-B Inline Filter Cartridge Replacement is a 10" combination in-line filtercomposed of coconut shell granular activated carbon (GAC) and calcite. It can be utilized in variousapplications to correct low pH levels, polish water, brew better tasting coffee, tea, or other beverages (or innumerous other food service applications), as a post filter in many reverse osmosis systems, and more. Itreduces the bad taste and odor of chlorine as well as sediment and increases the pH level of water via there-mineralization of soft, acidic, or low pH water - calcite is a natural mineral which dissolves in acidic waterto raise its pH to neutral.

05 September 2016 16/19

Pentek Quick Change FiltersCode: 09560001

Pentek QC10 series Quick Change water filters

FeaturesCapacity CBRR: 500 gallons (1,890L) 6 monthsCapacity GACR: 2.500 gallons (9,460L) 9 monthsWorking pressure: 30-125 psi (2,1-8,62 bar)Temperature Rating: 40 - 100°F (4,4 - 37,8°C)Flow rate CBRR: 0,5 gpm (1,9L/min)Flow rate GACR: 0,75 gpm (2,8L/min)Micron rating CBRR: 0,5Micron rating GACR: --Turbidity: NTU max = 5

VariantsCode Description09560001-01 Pentek QC10-CBR Quick Change complete system (6)09560001-02 Pentek QC10-CBRR replacement filter (12)09560001-03 Pentek QC10 replacement filter head (1)09560001-04 Pentek QC10-GAC Quick Change complete system (6)09560001-05 Pentek QC10-GACR replacement filter (12)

The PENTEK Quick Change series for drinking water is suitable for applications at the point of use, such asinstalling undersink. All these systems have the NSF certification, are equipped with many features for thereduction of contaminants and the Quick Change system that allows the quick replacement of the cartridgein the presence of water under pressure.This feature eliminates the need for additional shut-off valves on the head. The filtration system offersexcellent functionality of chemicals reduction with a compact configuration, in one-step. Important Notice:Read performance data and compare the capabilities of the system with your actual water treatmentrequirements. It is recommended that the supply water be tested, before installing a water treatmentsystem, to determine your water treatment needs.This system has been tested according to NSF/ANSI 42 and 53 for reduction of the substances listedbelow. The concentration of the indicated substances in water system entering was reduced to aconcentration less than or equal to the permissible limit for water system exiting, as specified in NSF/ANSI42 and 53.

* Head Input / output: 1/4 "quick fitting* System complete dimensions: 295,3x55,5 (mm.) - 2.1875 "x11,625" (In.)

CBRR CARTRIDGETest Conditions NSF certified NSF/ANSI 42 and 53*Flow Rate = 1,9lpm (0,5gpm)*Inlet Pressure = 60 psi (4.1 bar)*PH = 7.5 ± 1*Temperature = 68°F ±5F° (20°C ±2.5C°)Testing was performed under standard laboratory conditions, actual performance may vary.

05 September 2016 17/19

Substance ReductionChlorine: 97,5% * Particulates(0,5 -<1 micron) Class I: 99,7% * Cyst: 99,99% * Lead (pH 6.5): 99,3% * Lead(pH 8.5): 97,9% * Lindane: 99,1% * Atrazine: 94,5% * Odor * Color * Taste * Turbidity

Parts Included in the system• Filter head + filter • Mounting screws

GAC CARTRIDGETest Conditions NSF certified NSF/ANSI 42*Flow Rate = 2,8lpm (0,75gpm)*Inlet Pressure = 60 psi (4.1 bar)*PH = 7.5 ± 1*Temperature = 68°F ±5F° (20°C ±2.5C°)Testing was performed under standard laboratory conditions, actual performance may vary.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfectionbefore or after the system. Systems certified for cyst reduction may be used on disinfected waters that maycontain filterable cysts. NOTE: The maintenance of the system must conform with the manufacturer's recommendations, includingwith regard to the filter replacement filter. The contaminants or other substances removed or reduced bythis system may not necessarily be present in your water. The duration of the filter cartridge depends on thevolume of water used and of substances contained in the feed water. It is recommended to replace the filtercartridge every 12 months or if there is a noticeable change in taste, odor, or flow of the filtered water.

05 September 2016 18/19

Powered by TCPDF (www.tcpdf.org)