€¦ · web viewplease make every effort to fill out this form electronically and in “word”...

Client: Date:

POC:

Address:

Phone:

E-Mail:Apparatus Requirement :Model:

1

Howe & Howe Technologies, Inc.Bulldog 4x4 Specifications Sheet

To obtain a detailed Bulldog quote you must fill out the attached spec sheet. Please make every effort to fill out this form electronically and in “word” format. If you prefer to fill out this form by hand you may do so and fax it back to H&H at: 207-247-2755 or mail to:

Howe & Howe TechnologiesAttn: Bulldog Department

661 Main Street Waterboro, ME 04087

Please note that filling the form out by hand is acceptable but is not the preferred method as it will result in a longer wait time for receiving your detailed quote.

Fill out the form by clicking inside the check box next to the item desired, this should put an “x” in the box (see Example 1 below). Mac (Apple) users may not have compatibility with the check box feature. If you are unable to mark the check box please insert a “Y” in front of the check box next to the desired item (see Example 2 below).

Example 1: ☒Example 2: Y☐For any specs that require a written in response, that you are not sure how to answer or what to answer, please insert “TBD.”

E-Mail your completed spec sheet to:

Geoffrey Howe - [email protected]

If you require any assistance in filling out your spec sheet please feel free to contact the Howe & Howe Technologies Bulldog Department by phone: 207-247-2777 or by e-mail: [email protected].

Thank you and we look forward to hearing from you!

--Howe & Howe Technologies Bulldog Dept.

Truck

Truck Tier Selection

☒- Tier 1: New 2018-2019 Chassis: International 7400-7600 (HV) 4

mailto:[email protected]

mailto:[email protected]


☐- 2 Wheel Drive ☐- 4 Wheel Drive – HH RECOMMENDED☐- Single Axle – HH RECOMMENDED☐- 2 Door Cab – HH RECOMMENDED☐- 4 Door Cab☐- Automatic – HH RECOMMENDED☐- Front Axle 14K☐- Front Axle 16K – HH RECOMMENDED☐- Front Axle 20K☐- Rear Axle 23K – HH RECOMMENDED☐- Rear Axle 26K☐-Engine Exhaust Brake– HH RECOMMENDED☐- Steering Stabilizer – HH RECOMMENDED☐- 38,200 GVW – HH RECOMMENDED☐- 300 HP/860 ft-lbs. torque L9 Cummins ☐- 330 HP/1000 ft-lbs. torque L9 Cummins☐- 350 HP/1000 ft-lbs. torque L9 Cummins–HH RECOMMENDED☐- 50gal Fuel Tank Minimum - HH RECOMMENDED☐- Air Horns (Hood Mounted) – HH RECOMMENDED☐- Rear Sliding Window☐- VDL (Vehicle Data Logger)☐- Air Ride Drivers Seat– HH RECOMMENDED☐- Air Ride Passengers Seat☐- Passengers Bench Seat (Only Available without Air Ride)☐- Rear Passenger Seats (4 Door Only)☐- SCBA Rear Seats☐- Heated Mirrors w/ Electronic Control☐- Cruise Control☐- Air Conditioning – HH RECOMMENDED☐- AM/FM Radio☐- Custom Center Console (Not Available with Bench Seat)☐- Extra Interior Lighting☐- Tires: Heavy Duty 54” XZL (Top Speed Rating: 55mph) ☐- Steel Wheels – HH RECOMMENDED☐- Tires: Heavy Duty 46” On/Off Road with OEM Aluminum Wheels

Desired Truck SpecsCab Color: ________________Body Color: _______________Overall Height: ____________Maximum Step Height :____________Maximum Speed: __________________ - HH RECOMMENDED: 65mph

Truck (continued)Siren☐- HH Siren – HH RECOMMENDED☐- Speaker: One (1)

Truck Tier Selection

☒- Tier 1: New 2018-2019 Chassis: International 7400-7600 (HV) 4

Reflective OptionsReflective:☐- None (Not for U.S.)☐- Standard DOT ☐- Standard NFPA


☐- Speakers: Dual☐-Radio Rebroadcast Function☐-Multifunction Controller with auxiliary switches

Specify Desired Siren Specs:

Watts: _______- HH RECOMMENDS 100 WATTS

Speaker Location on Truck: ____________

Radio☐- Headsets w/ PTT on Headset☐ - Wireless Headsets

Brand: ________________ Quantity: ______________☐- Wired Headsets

Brand: ________________ Quantity: ______________ Location: ______________

Specify Desired Radio Specs: Radio Brand: __________________Mounted Location: ________________

Skid Plates:☐ - Front Bumper to Front Axle☐ - Cover Transmission and Transfer Case☐ -Fuel Tank, DEF Tank and Battery Box☐- Engine Oil Pan☐- Exhaust After Treatment ☐ - Additional Skid Protection Required:

Specify: ____________________________________

Apparatus BodyWorkstations: Locations☐- Front Right (Not for U.S.)☐- Front Left: (Not for U.S.)☐- Middle Right – HH RECOMMENDED

Truck Notes/Comments:

Radio Installation Options

☐- Customer Handles Install☐- Installed by H&H*Customer must supply the radio if “ Installed by H&H” is selected.

Reflective OptionsReflective:☐- None (Not for U.S.)☐- Standard DOT ☐- Standard NFPA

Workstations vs. Crosswalks

Crosswalks function like a bridge between workstations, allowing the operator to travel

directly from one workstation to another. You may choose to have workstations not connected by crosswalks. The Rear Cab (middle) Crosswalk connects the two workstations in the middle of the truck directly behind the cab. A rear vehicle crosswalk connects two workstations at the rear

of the truck Rear crosswalks cannot always be


☐-Middle Left – HH RECOMMENDED☐- Rear Right☐- Rear Left☐-None

Crosswalks: Location Options☐- Rear Cab (middle of truck) – HH RECOMMENDED☐- Rear Vehicle ☐- None

Crosswalks: Material☐- Non Slip Surface☐- Diamond Plate☐- Epoxy Grit – HH RECCOMMENDED

Specify Desired Toolbox/Storage SpecificationsNumber of Toolboxes: _______Toolbox Sizes: L_______-W-_______H-_______ Location: ______________Toolbox Sizes: L_______-W-_______H-_______ Location: ______________Toolbox Sizes: L_______-W-_______H-_______ Location: ______________Toolbox Sizes: L_______-W-_______H-_______ Location: ______________

Toolbox/Storage: options☐- Hinge Doors w/ Slam Latches – HH RECOMMENDED☐- LED Lights in Box – HH RECOMMENDED☐- In-Bed Tool Storage☐- Store Pick Poles and Hard Section

Front Bumper☐- OEM Front☐- Bulldog Custom – HH RECOMMENDED☐-Receiver Hitch

Front Bumper: Winch (if Applicable select type and material)☐- Electric 15,000lb – HH RECOMMENDED☐- PTO Winch (specify lbs.) __________________☐- Steel Cable – HH RECOMMENDED☐- Synthetic RopeSpecify Desired Length (feet) ________________

Apparatus Body (continued)Front Bumper: Finish☐- Diamond Plate☐- Bed Liner – HH RECOMMENDED☐- Paint (Specify Color) _________________

Rear Bumper

Workstations vs. Crosswalks

Crosswalks function like a bridge between workstations, allowing the operator to travel

directly from one workstation to another. You may choose to have workstations not connected by crosswalks. The Rear Cab (middle) Crosswalk connects the two workstations in the middle of the truck directly behind the cab. A rear vehicle crosswalk connects two workstations at the rear

of the truck Rear crosswalks cannot always be


☐-Bulldog Custom – HH RECOMMENDED☐- Receiver Hitch☐-HH Retractable Rear Bumper (Stow Away) – HH RECOMMENDED

Rear Winch Package ☐- No Winch – HH RECOMMENDED☐- Electric 15,000lb ☐- PTO Winch (specify lbs.) _______________☐- Steel Cable☐- Synthetic RopeSpecify Desired Length (feet)_________________

Rear Bumper: Finish☐- Diamond Plate☐-Bed Liner – HH RECOMMENDED☐- Paint (Specify Color) __________________

Other Apparatus Body Options☐- Quick Release Mud Flaps☐- Heavy Duty Head Board☐- Aux 120-volt A/C System (1500-watt inverter)☐- Auto Eject Battery Maintainer System ☐- Auto Eject Air Compressor System (Shore Powered)☐- Auto Eject Air System (External Air Source) ☐- Main Battery Disconnect – HH RECOMMENDED

Location: ☐- In Cab – HH RECOMMENDED ☐- On Battery Box

☐-Back – Up Camera☐- Forward Facing Camera☐- Grille Guard – HH RECOMMENDED☐- Hood Guard – HH RECOMMENDED☐- Body Guard – HH RECOMMENDED☐-Windshield Risers (nose to roof)☐- Tow Points Front and Rear – HH RECOMMENDED

Apparatus Body (continued)☐- Porta-Tank (Drop pool) Location: ☐- under truck (Complete HH Roller Mounted System 2100ga) ☐- under truck (Pool Storage with ½”Polypropylene Floor 2100ga)

☐ -Top (standard mounting) ☐ - Side (standard mounting) ☐- Side (standard mounting)

Rear Winch PackageDue to the amount of equipment and lack

of space on the back of a Bulldog a permanent rear winch cannot be

accommodated. To account for this, H&H has created a detachable rear winch

system. A Reese hitch is mounted on the rear of the truck, when desired the winch

can be fastened to the hitch and then detached when not in use. The winch is

stored in a custom built H&H winch storage box mounted to the truck.


☐ - Other _________________

Size ___________________ Frame Material ______________________

Brand __________________

*The High Volume Swivel Dump Option cannot be used with any of the underbody pool storage options. A top or side mount must be used for pool storage if a swivel dump is required.

Apparatus Body (continued)

LightsWork Lights☐- LED Lights in Compartments – HH RECOMMENDED☐-LED Ground Lights (360° coverage)☐- LED Lights: illuminate all work platforms - HH RECOMMENDED☐- LED Lights: illuminate pump and valve area – HH RECOMMENDED Scene Lights

Apparatus Body Notes/Comments:

Warning Light Package

☐- H&H Standard Light Package

☐- NFPA Compliant Light Package


☐- Adjustable and TelescopingSpecify Location: ___________

☐- Rear light on reverse circuit☐- Off-road LED bar front – HH RECOMMENDED☐- LED Side facing Work Lights – HH RECOMMENDED☐-LED lights for front and angles – HH RECOMMENDED

Warning Lights☐- HH 360° (standard) – HH RECOMMENDED Specify Colors: __RED_____________ ☐- Dual Color

Specify Colors: ___RED/________________☐- Amber Traffic Advisor

Specify Mounted Location: _____________

TankSize Options:☐- 500gal☐- 750gal☐- 1000gal☐- 1250gal☐- 1500gal ☐- 2000gal☐- Other

Lights/Logos Notes/Comments:

Warning Light Package

☐- H&H Standard Light Package

☐- NFPA Compliant Light Package

Maximum tank size on a 4 Door truck is 1,500 gallons.


Specify: __________________________

Material Options☐- Poly – HH RECOMMENDED☐- Steel☐- Custom Steel

Additional Tank Options☐- Additional Foam Tank – HH RECOMMENDED: 30GAL☐- Top fill☐- Foam Tank Sight Glass ☐- Water Tank Sight Glass☐- Skirted sides of tank

☐-Skirting Painted to Match the Cab☐- Aluminum Treadplate skirting

☐- Digital Water Level Gauge – HH RECOMMENDEDLocation: ☐- In Cab – HH RECOMMENDED

☐- On Pump Panel– HH RECOMMENDED ☐- At Work Station

☐- NFPA Compliant Baffle Walls- HH RECOMMENDED

PumpPower Options: Diesel Divorced Pump☐- 5-10hp☐-10-20hp☐- 20-30hp – HH RECOMMENDED (Hale HPX300-KBD24)☐- 30-40hp☐ -40-60hp

Power Options: Gas Divorced Pump☐- 5-10hp☐- 10-20hp

Tank Notes/Comments:

Divorced vs. PTO Pumps

HH recommends the use of Divorced Pumps on Bulldog 4x4 Truck.

Benefits of Divorced Pumps- Divorced pumps do not derive

their power from the truck’s transmission

- - Divorced pumps give you the


☐- 20-30hp ☐- 30-40hp – (HPX450-B35)

Power Options: PTO Pump☐- PTO Trans Take-off☐- PTO Engine Take Off

Specify Desired GPM: ______________Pump Brand and Model: ______________

Pump Options: Maximum GPM Desired☐- GPM: 100-200☐- GPM: 200-300☐- GPM: 300-400☐- GPM: 400-600☐- GPM: 600-800☐- GPM 800-1200

Pump Options: Maximum PSI Desired☐- PSI: 100-150☐- PSI: 150-200☐- PSI: 200-250☐- PSI: 250-350☐- PSI: 400+

Additional Pump Options☐- Share fuel from truck tanks☐- All Stainless Steel/Brass for all plumbing☐- Y-Strainer w/ Ball Valve Flush for water☐- Drafting Primer☐- Separate Fuel Filter/Water Separator☐- Foam System (Scotty 4171)

Pump (continued)Pump Controls: Location Options**Start, Stop, Throttle, and Pressure Gauges☐- At Pump☐- Rear of Truck☐- Crosswalk☐- Inside Cab

Pump Controls: Inside Cab**If you have selected “Inside Cab” above as a desired pump control location please checkall of the following controls that you would like tohave inside the cab:

Divorced vs. PTO Pumps

HH recommends the use of Divorced Pumps on Bulldog 4x4 Truck.

Benefits of Divorced Pumps- Divorced pumps do not derive

their power from the truck’s transmission

- - Divorced pumps give you the

Up to two (2) locations may be selected for pump controls.


☐-Start & Stop☐-Throttle☐- Pressure Gauges

Pump Notes/Comments:


PlumbingFire Hydrant Hook Up: Location☐- Driver Side Rear – HH RECOMMENDED☐- Passenger Side Rear

Fire Hydrant Hook Up: Specifications

Size: ________________________

Thread Male or Female: ____________________

Direct Tank Fill: Specifications

Size: ________2 ½ ”_________________

Thread: ☐- Male or ☐- Female

Location: ☐- Front or ☐- Rear

Location: ☐- Left or ☐- Right

Discharge Connections for Work Stations: Size (select one)☐- 1” – HH RECOMMENDED☐- 1.5”

Discharge Connections for Work Stations: Location☐- Middle Cab Left Station☐- Middle Cab Right Station☐-Rear Left Station☐- Rear Right Station

Plumbing Options: Other☐- Quick Fill Hatch Top – HH RECOMMENDED☐- High Volume Dump Gate☐-Electric dump☐- Swivel Dump *The High Volume Swivel Dump Option cannot be used with any of the underbody pool storage options. A top or side mount must be used for pool storage if a swivel dump is required.

Fire Apparatus

Plumbing Notes/Comments:


Hose Reels☐- Hose Reels Quantity: ____________

Mount Location :____________☐- Electric Rewind☐- 1” x100’ Mounted on Rear of Tank – HH RECOMMENDED☐- 1.5” x 100’ Mounted on Rear of Tank☐- Straight End – HH RECOMMENDED☐- Pistol End

Hose Type☐- Rubber☐- Reel Lite

Hose Bed☐- Hose Bed on Top of Tank – HH RECOMMENDED☐- Hose Bed Covered☐- Cascade Holder on Top of Tank

Hose Bed Cover: If selected above☐- Rolling Cover ☐-NFPA Compliant Rolling Cover☐- Canvas Cover- HH RECOMMENDED☐- Custom HH Doors☐- NFPA compliant Anti-Flack straps

Hose Bed Specifications: (If checked above)

Feet of Hose Required: ________________________

Hose Kind: ______________________

Chemical Barrel Holders

☐- Chemical Barrel Holders

Specify (If checked above)

Location: ________________________

Number of Barrels: ________________


Fire Apparatus (continued)Front Corner Bumper Nozzles☐- Front Corner Bumper Nozzles – HH RECOMMENDED☐- Control outside Valve☐- In Cab Electric Valve Control – HH RECOMMENDED☐- Separate Right and Left Nozzle Controls

Front Remote Monitor☐- Front Remote Monitor System – HH RECOMMENDED☐- Tethered☐- WirelessSpecify desired GPM: _________

Front Remote Monitor Brand Selection:☐- Akron☐- Task Force ☐- Elkhart

Front Remote Monitor System

HH recommends using a monitor with Fog Nozzle, quick disconnect and

stream shaper for the front remote monitor system.

Fire Apparatus Notes/Comments:


Pricing with Above Specifications

IMPORTANT NOTE: This is a simple non-binding quote EXAMPLE to provide a general idea of final truck pricing. Final pricing may vary depending on availability of base chassis and parts at the time of purchase. Final detailed quote can be obtained by contacting Howe & Howe Technologies and setting up a formal purchasing request. This quote does not include shipping.

TIER 1: NEW INTERNATIONAL CHASSIS (105K ALLOWANCE) 7400 4X4 $XXXXXX USD

If ORDERED WITHIN 60 DAY DISCOUNTED PRICE $XXXXXX USD

€¦ · web viewplease make every effort to fill out this form electronically and in “word”...

Documents