… · this seal type is assembled in a cartridge unit which makes replacement safe and easy. due...
TRANSCRIPT
GRUNDFOS DATA BOOKLET
CRN10-04 A-FGJ-G-V-HQQV 3x230/400 50 HZ Grundfos pump 96501184
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/CRN10/96501184/CRN-10-4-A-FGJ-G-V-HQQV.html
[email protected]. +31 152 610 900 fax. +31 152 616 289
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description1 CRN 10-4 A-FGJ-A-V-HQQV
Product No.: On request
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pumpmaterials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures highreliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling.Pipe connection is via combined DIN-ANSI-JIS flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Further product detailsSteel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical fieldaround the products ensures deposition of paint particles as a thin, well-controlled layer on the surface.An integral part of the process is a pretreatment. The entire process consists of these elements:1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.
PumpA standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motorstool by means of two coupling guards.
The pump head and flange for motor mounting is made in one piece (cast iron). The pump head coveris a separate component (stainless steel). The pump head has a combined 1/2" priming plug and ventscrew.
The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This sealtype is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,this seal type is suitable for high-pressure applications. The cartridge construction also protects thepump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.Primary seal:
• Rotating seal ring material: silicon carbide (SiC)• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of thismaterial pairing offers good resistance against abrasive particles.Secondary seal material: FKM (fluorocarbon rubber)
1/13
Printed from Grundfos Product Centre [2018.06.003]
FKM has excellent resistance to oils and chemicals. Above 90 °C, FKM should only be used in media without water.
The shaft seal is screwed into the pump head.
The chambers and impellers are made of stainless-steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces, andthe shape of the blades ensure a high efficiency.
The pump has a stainless steel base mounted on a separate base plate. This base and base plate arekept in position by the tension of the staybolts which hold the pump together. The outlet side of thebase has a combined drain plug and bypass valve. The pump is secured to the foundation by four boltsthrough the base plate. The flanges and base are cast in one piece and prepared for connection bymeans of DIN, ANSI or JIS.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.The motor is flange-mounted with tapped-hole flange (FT).Motor-mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).Electrical tolerances comply with IEC 60034.The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.The motor does not incorporate motor protection and must be connected to a motor-protective circuitbreaker which can be manually reset. The motor-protective circuit breaker must be set according to therated current of the motor (I1/1).The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.
Technical data
Controls:Frequency converter: NONE
Liquid:Pumped liquid: WaterLiquid temperature range: -20 .. 90 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Rated flow: 10 m³/hRated head: 31.9 mPump orientation: VerticalShaft seal arrangement: SingleCode for shaft seal: HQQVApprovals on nameplate: CE, EACCurve tolerance: ISO9906:2012 3B
Materials:Base: Stainless steel
EN 1.4408AISI 316
Impeller: Stainless steelEN 1.4401AISI 316
Bearing: SIC
2/13
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionInstallation:Maximum ambient temperature: 60 °CMaximum operating pressure: 25 barMax pressure at stated temp: 25 bar / 90 °C
25 bar / -20 °CType of connection: DIN / ANSI / JISSize of inlet connection: DN 40
1 1/2 inchSize of outlet connection: DN 40
1 1/2 inchPressure rating for pipe connection: PN 25Flange rating inlet: 300 lbFlange size for motor: FT115
Electrical data:Motor standard: IECMotor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.5 kWPower (P2) required by pump: 1.5 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 5.45/3.15 AStarting current: 850-930 %Cos phi - power factor: 0.87-0.82Rated speed: 2890-2910 rpmEfficiency: IE3 84,2%Motor efficiency at full load: 84.2 %Motor efficiency at 3/4 load: 84.5 %Motor efficiency at 1/2 load: 83.1 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F
Others:Minimum efficiency index, MEI ≥: 0.70Net weight: 47 kgGross weight: 51 kgShipping volume: 0.094 m³
3/13
Printed from Grundfos Product Centre [2018.06.003]
On request CRN 10-4 A-FGJ-A-V-HQQV 50 HzH
[m]
0
5
10
15
20
25
30
35
40
45
Q [m³/h]0 1 2 3 4 5 6 7 8 9 10 11 12 13
eta[%]
0
20
40
60
80
100
CRN 10-4, 3*400 V, 50Hz
P[kW]
0.0
0.5
1.0
1.5
NPSH[m]
0
2
4
6P1
P2
4/13
Printed from Grundfos Product Centre [2018.06.003]
H[m]
0
5
10
15
20
25
30
35
40
45
Q [m³/h]0 2 4 6 8 10
eta[%]
0
20
40
60
80
100
CRN 10-4, 3*400 V, 50Hz
P[kW]
0.0
0.5
1.0
1.5
NPSH[m]
0
2
4
6P1
P2
200280 215
248
281
433
G 1/2 G 1/2
1 X G 1/2
110
80
130 42105
4 x 23.5x18.5
4 13x
26
178
115
150
135
L1 L2 L3
L3L2L1
LOW VOLTAGEDIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
Description ValueGeneral information:Product name: CRN 10-4 A-FGJ-A-V-HQQVProduct No: On requestEAN number: On requestTechnical:Rated flow: 10 m³/hRated head: 31.9 mStages: 4Impellers: 4
Number of reduced-diameterimpellers:
0
Low NPSH: NPump orientation: VerticalShaft seal arrangement: SingleCode for shaft seal: HQQVApprovals on nameplate: CE, EACCurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Base: Stainless steel
EN 1.4408AISI 316
Impeller: Stainless steelEN 1.4401AISI 316
Material code: ACode for rubber: VBearing: SICInstallation:Maximum ambient temperature: 60 °CMaximum operating pressure: 25 barMax pressure at stated temp: 25 bar / 90 °C
25 bar / -20 °CType of connection: DIN / ANSI / JISSize of inlet connection: DN 40
1 1/2 inchSize of outlet connection: DN 40
1 1/2 inchPressure rating for pipe connection: PN 25Flange rating inlet: 300 lbFlange size for motor: FT115Connect code: FGJLiquid:Pumped liquid: WaterLiquid temperature range: -20 .. 90 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³Electrical data:Motor standard: IECMotor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.5 kWPower (P2) required by pump: 1.5 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 5.45/3.15 AStarting current: 850-930 %Cos phi - power factor: 0.87-0.82Rated speed: 2890-2910 rpmEfficiency: IE3 84,2%Motor efficiency at full load: 84.2 %Motor efficiency at 3/4 load: 84.5 %
200280215
248
G 1/2G 1/2
1 X G 1/2
110
13042
105
4x23.5x18.5
413x
178
135
5/13
Printed from Grundfos Product Centre [2018.06.003]
Description ValueMotor efficiency at 1/2 load: 83.1 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 85U05906Controls:Frequency converter: NONEOthers:Minimum efficiency index, MEI ≥: 0.70Net weight: 47 kgGross weight: 51 kgShipping volume: 0.094 m³
6/13
Printed from Grundfos Product Centre [2018.06.003]
On request CRN 10-4 A-FGJ-A-V-HQQV 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0
I[A]
0.0
1.0
2.0
3.0
4.0
CRN10-4 + 90SB 1.5 kW 3*400 V, 50 Hz
eta
cos phi
I
n[rpm]
2000
2200
2400
2600
2800
P1[kW]
0.0
1.0
2.0
3.0
4.0
n
P1
7/13
Printed from Grundfos Product Centre [2018.06.003]
On request CRN 10-4 A-FGJ-A-V-HQQV 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
200
280
215
248
281 433
G 1
/2G
1/2
1 X
G 1
/2
110
80
130
42 105
4x
23.5
x18
.5
413
x26
178
115150
135
8/13
Printed from Grundfos Product Centre [2018.06.003]
Exploded view
301a
219
92
7
7a
77
301a
92
11
9
51
100
49
105
45
215a
215
18
217215a
534a534
531531a
28
17
251d
251a
6
11b
66a
67
530530a
9/13
Printed from Grundfos Product Centre [2018.06.003]
Sectional drawing (TM058200 for TPE2,TPE3)
4
2 13
5
TM058200
10/13
Printed from Grundfos Product Centre [2018.06.003]
Exploded view ( TM057026 for MGE model H/I )
251d
251b
290
287277a
286
277
273a
273
268268a289a289
288b288288a
251a
252b
156c
159d
156b
156d188
275a
153
154
158
178
185
192
191
159e
156c 156
151152
266
187
291
293
252a
172
150
287a
502
273b
157
11/13
Printed from Grundfos Product Centre [2018.06.003]
Parts list CRN 10-4, Product No. On requestValid from 1.1.2011 (1152)
Pos Description Annotation Données de classification Référence Quantité Unité+ Motor 1 pcs- Base cpl. 1 pcs
6 Base 125 Drain plug 156 Base plate 1201 Flange 2203 Helical compression spring 2
- Rubber module 1 pcs37 O-ring Material type: FKM 238 O-ring Diameter: 16,3 1
Material type: FKMThickness: 2,4
38a O-ring Diameter: 5,3 1Material type: FKMThickness: 2,4
60 Spring 4100 O-ring Diameter: 16,3 2
Material type: FKMThickness: 2,4
- 2 Pump head cpl. 1 pcs2 Pump head 17 Coupling guard 27.a Combi Slot Torx screw 4
- 18 Air vent screw 1Plug 1Spindle 1
23 Plug 128 Hex head screw Length (mm): 20 4
Thread: M837.a O-ring 176 Nameplate 176a Rivet 277 Pump cover 1
- 8 Coupling cpl. 1 pcs9 Hex socket head cap screw Designation: DIN 912 4
Length (mm): 25Thread: M8
10 Shaft pin Diameter: 5 1Length (mm): 26
10a Coupling half 226 Staybolt 4 pcs36 Nut Thread: M16 4 pcs55 Outer sleeve 1 pcs66a Washer Designation: DIN 125 A2 4 pcs
Internal diameter: 17Outer diameter: 30Thickness: 3
- 80 Chamber stack 1 pcs- 3 Top intermediate chamber 1
Cover plate 1Guide vane 10
3 Top intermediate chamber 1- 4 Intermediate chamber cpl. 2
3a Chamber w/o guide vanes 145 Neck ring cpl. 165 Retainer 1
- 4a Intermediate chamber cpl. 1Guide vane 10Bearing plate 1
12/13
Printed from Grundfos Product Centre [2018.06.003]
Pos Description Annotation Données de classification Référence Quantité UnitéBearing bush 1Guide cup 1Sand Lifter 1
3a Chamber w/o guide vanes 145 Neck ring cpl. 165 Retainer 126.b Hex head screw 226.c Washer Designation: DIN 125A 2
Thickness: 1,626a Strap cpl. 236 Lock nut Thread: M8 1
- 44a Inlet part cpl. 1Inlet part 1
45 Neck ring cpl. 165 Retainer 144b Inlet part 147a Bearing ring 149 Impeller cpl. 4
- 51 Shaft, spline, cpl. 1Bar 0
62 Stop ring 164 Spacing bush Length (mm): 9.00 164.d Spacer 164c Spacing pipe Length (mm): 12.7 166 Wedge lock washer 169 Spacing pipe Length (mm): 29.05 269 Spacing bush Length (mm): 18.00 1105 Shaft seal Material type: HQQV 1 pcs
13/13
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289