- restorative - product catalog - tatum surgical · advantages of tatum implant systems: only one...
TRANSCRIPT
Others make Implants to sell...Tatum Surgical makes Implants to treat your Patients.
- RESTORATIVE - PRODUCT CATALOG
MADE IN USA
Advantages of Tatum Implant Systems: Only one surgical procedure is required to place and load the Tatum Surgical implant because the implants are designed to be left exposed at the crest of the soft tissue.
Angled abutments are available in multiple angles thereby making them absolutely parallel to each other so that a passive fit of the casting can be achieved.
The system has straight and angled post guides that correspond to various abutments. As a result, on the day of the surgery, immediately following implant placement, before placing healing screw, abutment guides are used to select appropriate abutments for future use. The practitioner will have 4-6 months to order the selected abutments. This eliminates the need for large inventory of abutments thereby reducing initial investment substantially and making this system most economical.
The system has hand instruments which can be combined with the drills so that in an event of power failure or equipment failure (handpiece, physiodispensor, motor, irrigation device, etc. ) the clinician can still complete the Osteotomy procedure and successfully place the implant.
The Unipost Implant System has three different designs of implants. The Screw and Tapered type implants are available in 7 different diameters and four different lengths. The D-Fin implant is available in 4 different diameters and 2 different lengths. These three designs of implants with wide ranges of sizes allow management of several different clinical situations depending upon available bone.
The system has osteotomes which allows placement of implants in thin bone in the maxilla without the use of any drills, handpiece, and physiodispensor. The entire maxillary arch can be treated with the use of simple osteotomes. Tatum Surgical carries straight, offset, and tapered osteotomes.
Implants are manufactured by engineers who with very sound bio-mechanical principles routinely manufacture titanium devices for NASA of NASA standards.
Unipost implants are very economical as compared to most of the other implant systems. Current prices are $110 for all available implants.
The system is designed to utilize bone expansion concept which provides very good esthetic results in anterior maxilla.
The drills are designed for internal irrigation for better osteotomy preparation.
The abutments are designed in a way to allow the clinician to screw them as well as cement them thereby providing stability to the final prosthesis.
The same abutments fit all three designs of implants. Hence the name Unipost Implant System is quite justified and most appropriate. It is by far the simplest system to use.
All fixed prostheses are cemented. Once abutments are placed, the remaining procedure is routine crown and bridge dentistry. The abutments have a smooth surface collar which can be prepared and included in the prosthesis thereby making the implant, the abutment, and the crown a single unit, which physiologically mimics a natural tooth.
Surgically and prosthetically, it is a much simpler system to use as compared to most other implant systems. Usually, other implant systems require two surgical procedures and complicated prosthetic procedures using several unnecessary parts like analogs, transfer copings, etc. This adds extraneous steps, laboratory time, and expense, thus increasing a greater chance for error.
Your Sourcefor ImplantsTo Meet EveryClinical Need
Tatum Integrity Tapered Implant System ............................... 4 Integrity Angled Post Abutments ........................................... 5 Integrity Straight Post Abutments.......................................... 5 Inegrity One-Piece Post Abutments ...................................... 5 Integrity Abutment Screws .................................................... 5 Integrity Titanium Temporary Abutments .............................. 5 Integrity Ball Post Abutments ................................................ 5 Integrity Titanium Bases ........................................................ 6 Intergrity Bio-Torque Drivers .................................................. 6 Integrity Healing Caps ............................................................ 6 Integrity Implant Cover Screws .............................................. 6 Integrity Zest Locators ........................................................... 6 Integrity Healing Cap ............................................................. 7 Integrity Platform Switch Abutment ....................................... 7 Integrity Transfer Analogs ...................................................... 7 Integrity Implant Scan Body .................................................. 7 Integrity Analogs .................................................................... 7 Integrity Engaging and Non-Engaging UCLAs ...................... 7 Tatum Traditional Unipost Abutments and Components ...... 8 Tatum Traditional Push-In Abutments ................................... 8 Resiment Ready Mix Cement ................................................ 8 EZ-Prep Kit ............................................................................. 8 Tatum Traditional Unipost Abutment Dimensions ................. 9 TatumTraditionalHealingCuffs ........................................... 10 “O” Ball Attachments and Components ...............................11 Zest Locators ....................................................................... 12 UCLAs and Components ..................................................... 14
Use Our Toll Free Number to PLACE YOUR ORDER 1-888-360-5550Tatum Surgical - A Division of Suncoast Dental, Inc. • www.tatumsurgical.com54
Integrity Angled Post Abutments
Integrity Tapered Implant SystemIn
tegr
ity T
aper
ed Im
plan
t Sys
tem
Inte
grity
Impl
ant S
yste
m -
Post
Abu
tmen
ts
•Ouruniquetapereddesignisanatomicallycorrect, enabling easier implant placement, while providing enhanced primary stability.•Designedtobeasinglesurgeryimplant,thatpreserves both crestal bone, and soft tissue.•Simpleabutmentplacementduetothesofttissuelevel connection.•Internalpentagonoffers5secure,andpositiveabutment positions.•Strong,stable,andretrievableabutmentdesign
utilizing large retention screws (2.0mm and 2.5mm).•Internaltaperedabutmentconnection
to reduce the abutment/screw load.•Alab“Friendly”systemthroughouttheworld.
Integrity Tapered Implant System
Designed for Simplicity,Engineered for Strength.
Tatum Integrity Implants Internal Pentagon featureoffers5secure, and positive abutment positions.
Post Abutment
Retention Screw
HT 30 Thumb Drive
Integrity Tapered Implant
FullyAssembled Integrity Tapered Implant
One-Piece Post AbutmentsAvailable in sizes 3.7 through 8.0 mm
Available in sizes 3.7 mm through 8 mm and angles 0°~15°
PITI 5.0 mm x 15°
PITI 6.0 mm x 15°
PITI 7.0 mm x 15°
PITI 3.7~4.5 mm x 15°
PITI 8.0 mm x 15°
3.7~8.0 mm Abutment Blank
Integrity Ball Post Abutments
1mmCuff 3.7 ~ 6.0 mm 3mmCuff
3.7 ~ 6.0 mm5mmCuff
3.7 ~ 6.0 mm
Ball Post Abutment Housing
Integrity Straight Post AbutmentsAvailable in sizes 3.7 through 8.0 mm
Integrity Titanium Temporary Abutment
Available in sizes 3.7 through 8.0 mm
2.5 mm
Integrity Abutment Screws
2 mm
Use Our Toll Free Number to PLACE YOUR ORDER 1-888-360-5550Tatum Surgical - A Division of Suncoast Dental, Inc. • www.tatumsurgical.com76
4mmCuff 3.7 mm ~ 8.0 mm
3mmCuff 3.7 mm ~ 8.0 mm
ITI Analog 3.7 mm
ITI Analog 4.5 mm
ITI Analog 5.0 mm
ITI Analog 4.0 mm
ITI Analog6.0 mm
ITI Analog7.0 mm
ITI Analog8.0 mm
Integrity Analogs
Integrity Zest Locators
Integrity Engaging and Non-Engaging
UCLAs
UCLA 3.7~8 .0 mm
Integrity Tapered Implant SystemIntegrity Tapered Implant SystemIn
tegr
ity Im
plan
t Sys
tem
- Ti
tani
um A
butm
ents
, Hea
ling
Cap
s, C
over
Scr
ews,
Zes
t Loc
ator
s an
d D
river
s
Inte
grity
Impl
ant S
yste
m -
UC
LAs
, Tra
nsfe
r Ana
logs
, Ana
logs
, Hea
ling
Cap
, Pla
tfor
m S
witc
hes
and
Scan
Bod
ies
3.7~8.0 mm Transfer
Integrity Transfer Analogs
Implant Cover Screws
HCS 3.7~4.5 mm
HCS 5.0 mm
HCS 6.0 mm
HCS7.0 mm
HCS8.0 mm
2mmCuff 3.7 mm ~ 8.0 mm
1mmCuff 3.7 mm ~ 8.0 mm
Integrity Bio-Torque
Drivers
.050 in. Long
.050 in. Short
Integrity Delrin Healing Cap
Healing Cap3.7 mm ~ 8.0 mm
Integrity Healing Caps
HCS 4.0 mm
HCS 5.0 mm
HCS 4.5 mm
HCS 3.7 mm
HCS 7.0 mm
HCS 8.0 mm
HCS 6.0 mm
Integrity Implant Scan Body
3.7~8.0 mm
Integrity Platform Switch Abutment
PITI6.0 mm
Integrity Titanium Bases
Available in sizes 3.7 through 8.0 mm
Angles 0°, 15° and 30°
Available in sizes 3.7 through 8.0 mm
Use Our Toll Free Number to PLACE YOUR ORDER 1-888-360-5550Tatum Surgical - A Division of Suncoast Dental, Inc. • www.tatumsurgical.com98
Resiment Ready-Mix A filled Composite Resin Cement
Tatu
m T
radi
tiona
l Uni
post
Abu
tmen
t Dim
ensi
ons
Tatu
m T
radi
tiona
l Uni
post
Sys
tem
Abu
tmen
ts a
nd C
ompo
nent
s
EZ-Prep Kit (Sold Seperately)
Designed to aid in placing Tatum Unipost Implants.
3 GW 2 15062 6 GW Ultra 856-016 18198-5 7 GW Ultra 856-016 18198-5 9 GW Ultra 856-018 18188-5 10 GW Ultra 856-018 18188-5 11 Piranha856-018F SameNo. 13 Piranha859-016F SameNo. 15 Piranha878-016F SameNo.
Hole No. Product Reorder No.
Push-In Post AbutmentsAvailable in sizes: 3.5 mm through 8.0 mm Angles 0°-15°-30°
PN 4.0 mm x 0°
PN 4.0 mm x 10°
PN 4.0 mm x 30°
Traditional Unipost Abutments
20º Threaded post
0º Threaded post 10º Threaded post
30º Threaded post
Traditional Unipost Abutment Dimensions
PN 30.00 3.0 mm 0° 9 mm PN 30.00S 3.0 mm 0° 5 mm PN 30.10S 3.0 mm 10° 5 mm PN 30.20S 3.0 mm 20° 5 mm
PN 35.00 3.5 mm 0° 9 mm PN 35.10 3.5 mm 10° 9 mm PN 35.20 3.5 mm 20° 9 mm PN 35.30 3.5 mm 30° 9 mm
PN 35.00S 3.5 mm 0° 5 mm PN 35.10S 3.5 mm 10° 5 mm PN 35.20S 3.5 mm 20° 5 mm PN 35.30S 3.5 mm 30° 5 mm
PN 40.00 4.0 mm 0° 9 mm PN 40.10 4.0 mm 10° 9 mm PN 40.20 4.0 mm 20° 9 mm PN 40.30 4.0 mm 30° 9 mm
PN 40.00S 4.0 mm 0° 5 mm PN 40.10S 4.0 mm 10° 5 mm PN 40.20S 4.0 mm 20° 5 mm PN 40.30S 4.0 mm 30° 5 mm
PN 45.00 4.5 mm 0° 9 mm PN 45.10 4.5 mm 10° 9 mm PN 45.20 4.5 mm 20° 9 mm PN 45.30 4.5 mm 30° 9 mm
PN 45.00S 4.5 mm 0° 5 mm PN 45.10S 4.5 mm 10° 5 mm PN 45.20S 4.5 mm 20° 5 mm PN 45.30S 4.5 mm 30° 5 mm
PN 50.00 5.0 mm 0° 9 mm PN 50.10 5.0 mm 10° 9 mm PN 50.20 5.0 mm 20° 9 mm PN 50.30 5.0 mm 30° 9 mm
PN 50.00S 5.0 mm 0° 5 mm PN 50.10S 5.0 mm 10° 5 mm PN 50.20S 5.0 mm 20° 5 mm PN 50.30S 5.0 mm 30° 5 mm
PN 60.00 6.0 mm 0° 9 mm PN 60.10 6.0 mm 10° 9 mm PN 60.20 6.0 mm 20° 9 mm PN 60.30 6.0 mm 30° 9 mm
PN 60.00S 6.0 mm 0° 5 mm PN 60.10S 6.0 mm 10° 5 mm PN 60.20S 6.0 mm 20° 5 mm PN 60.30S 6.0 mm 30° 5 mm
PN 70.00S 7.0 mm 0° 5 mm
PN CM custom made post by request >30°
Post Post Post Catalog # Diameter Angle Height
Use Our Toll Free Number to PLACE YOUR ORDER 1-888-360-5550Tatum Surgical - A Division of Suncoast Dental, Inc. • www.tatumsurgical.com1110
3.5 mm
HT 11 Driver
HealingCuffonImplant
O-Ring Insertion Tool
“O” Ball Abutments and Housing (new with hex)
“O” Ball Plastic Analogs (large and small)
4.0 mm
4.5 mm
5.0 mm
6.0 mm(Also available in
7.0 mm and 8.0 mm)
Tatu
m T
radi
tiona
l “O
” B
all A
ttac
hmen
ts a
nd C
ompo
nent
s
Tatu
m T
radi
tiona
l Hea
ling
Cuff
s Healing Cuffs “O” Ball Attachments and Components
Use Our Toll Free Number to PLACE YOUR ORDER 1-888-360-5550Tatum Surgical - A Division of Suncoast Dental, Inc. • www.tatumsurgical.com1312
Zest Ratchet Driver
3.5 x 0mm
3.5 x 0mm3.5 x 1mm
3.5 x 3mm
3.5 x 4mm
Locator Core Tool
Zest Ratchet Driver
Zest
Loc
ator
s
Zest
Loc
ator
s Zest Anchors
3.5 x 2mm
Name Description Catalog #
ZL Angle Guide Angle Measuring Guide #9530 ZL Alignment Pin Alignment Pin for Angle Guide (2 Pk) #9531 ZL Locator Par. Post Locator Parallel Post (4 Pk) #8517 ZL Locator Cast To Bar Locator Cast/Bar Anchors (2 Pk) #8536 ZLFA4mmAnalog LocatorFemaleAnalog(4Pk) #8530 ZL Core Tool Locator Core Tool #8393 ZL Impression Coping Impression Coping (4 Pk) #8505 ZL Male Processing Pk. Male Processing Pack (2 Pk) #08519-2 ZL Male Processing Pk. Male Processing Pack (10 Pk) #08519-10 ZL Torque Wrench Kit Locator Torque and Thumb Knob Wrench Kit #4391
ZLA3.5X0.00mm Locator Abutment 3.5x00mm #08100 ZLA3.5X1.00mm Locator Abutment 3.5x1.0mm #08101 ZLA3.5X2.00mm Locator Abutment 3.5x2.0mm #08102 ZLA3.5X3.00mm Locator Abutment 3.5x3.0mm #08103 ZLA3.5X4.00mm Locator Abutment 3.5x4.0mm #08104 ZLA4.0X0.25mm Locator Abutment 4.0x.25mm #08110 ZLA4.0X1.00mm Locator Abutment 4.0x1.0mm #08111 ZLA4.0X2.00mm Locator Abutment 4.0x2.0mm #08112 ZLA4.0X3.00mm Locator Abutment 4.0x3.0mm #08113 ZLA4.0X4.00mm Locator Abutment 4.0x4.0mm #08114 ZLA4.5X0.50mm Locator Abutment 4.5x.50mm #08120 ZLA4.5X1.00mm Locator Abutment 4.5x1.0mm #08121 ZLA4.5X2.00mm Locator Abutment 4.5x2.0mm #08122 ZLA4.5X3.00mm Locator Abutment 4.5x3.0mm #08123 ZLA4.5X4.00mm Locator Abutment 4.5x4.0mm #08124
ZL Male Clear (5.0 lb. Retention) Locator Male Regular Retention (4 Pk) #8524
ZL Male Pink (3.0 lb. Retention) Locator Male Light Retention (4 Pk) #8527
ZL Male Blue (1.5 lb. Retention) Locator Male Extra Light Retention (4 Pk) #8529
ZL Male Green (4.0 lb. Range) Locator Male Extended Range (4 Pk) #8547
ZL Male Red (1.0 lb. Range) Locator Male Extended Range, Extra Light Retention (4 Pk) #8548 Zest Chairside Kit Zest Chairside Processing Kit #09566
15Tatum Surgical - A Division of Suncoast Dental, Inc. • www.tatumsurgical.com
14
3.5 mm 4.0 mm 4.5 mm
5.0 mm 6.0 mm
Transfer Analog
.050 Hex Driver
Tatum Implant Analog
TemporaryAbutment
4mm UCLA
2.5 mm Retention Screw
C & B Analogs 3.0 mm through 8.0 mm
Denture Model with Implants
Denture Model with Transfer Analogs
Denture Model with UCLAs
Bio-Torq 1.25mm Driver with Wrench
Tatu
m T
radi
tiona
l UC
LAs
and
Com
pone
nts
Tatu
m T
radi
tiona
l UC
LAs
and
Com
pone
nts Implant Analogs
Tatum Surgical A division of Suncoast Dental, Inc.
4500 140Th Avenue North Suite 112 Clearwater,FL33762
www.TatumSurgical.com
Tel: 727-536-4880 Fax: 727-531-6005
Toll Free Number 1-888-360-5550
Email: [email protected]
FDA Marketing Approval 1981
ISO 13485:2012
ISO 9001:2008
MDD 93/42/EEC
FDA CFR Part 820 and CFR 803
35