- mte · nsd-1900 3/4 194/1,874 2.38 94 40 133 151 30 104 ... ra (mm) length l1 (mm) length l2 (mm...
TRANSCRIPT
www.norbar.com
NSD SerieS HyDraulic WreNcH
NHcl SerieS HyDraulic WreNcH
NSD Series
Square Drive
(inches)
Min/Max,N.m
@10,000 p.s.i (+\- 3%)
Weight*(kg)
Reaction Area - RA
(mm)
Length L1
(mm)
Length L2
(mm)
Length L3
(mm)
Radius R
(mm)
Height H1
(mm)
Height H2
(mm)
Width W1
(mm)
Width W2
(mm)
Width W3
(mm)
NSD-1900 3/4 194/1,874 2.38 94 40 133 151 30 104 145 50 69 56
NSD-4500 1 355/3,960 5.10 136 47 183 202 32 124 166 70 91 81
NSD-8000 1-1/2 765/6,928 7.80 139 55 193 214 44 151 199 76 114 89
NSD-15000 1-1/2 1,407/14,633 13.56 165 57 222 239 52 187 232 99 136 127
NSD-27000 2-1/2 2,377/2,4315 28.12 191 88 264 295 76 233 274 126 189 141
NSD-40000 2-1/2 3,577/34,986 34.01 191 88 276 298 79 248 289 149 213 141
NSD-60000† 2-1/2 ** 65.77 189 186 318 338 83 285 320 146 210 140
NSD-80000† 2-1/2 ** 133.80 223 150 373 406 95 356 396 184 248 146
*Weight includes tool, reaction member and square drive. †Steel Casting **Please inquire for additional information.
NHL-1800 Heads(mm)
ATF Radius P/R
19 27 10
27 30 9
32 33 9
37 36 9
36 38 9
46 41 9
51 44 9
NHL-4500 Heads(mm)
ATF Radius P/R
32 35 9
37 37 9
41 40 9
46 43 10
48 45 12
51 45 10
56 48 10
60 50 10
65 54 12
70 57 12
75 60 12
NHL-9500 Heads(mm)
ATF Radius P/R
51 46 12
56 48 12
60 51 12
65 55 12
70 61 14
75 65 13
76 67 16
86 72 16
95 77 16
NHL-14000 Heads(mm)
ATF Radius P/R
60 51 11
65 55 12
70 61 14
75 65 13
76 67 16
86 72 24
95 78 24
105 83 24
NHL-23000 Heads(mm)
ATF Radius P/R
70 64 23
75 67 23
76 69 25
86 74 25
95 81 26
105 85 26
115 91 26
125 99 26
135 104 26
NHL-35000 Heads(mm)
ATF Radius P/R
86 74 24
95 81 26
105 85 25
115 91 25
125 98 25
135 104 26
145 110 28
NHL-65000 Heads(mm)
ATF Radius P/R
115 100 33
125 105 33
135 110 33
145 116 32
155 121 32
165 127 32
175 133 32
185 138 32
NHCSeries
Min/Max,N.m
@10,000 p.s.i (+\- 3%)
Length (mm)
Height(mm)
Body Width(mm)
Head Width(mm)
Range(mm)
Weight with Head(kg)
NHC-1800 159/1,754 159 102 28 24 19 - 51 3.29
NHC-4500 399/4,168 178 146 37 27* or 30† 32 - 75 4.20
NHC-9500 904/9,354 235 159 38 38 51 - 98 6.35
NHC-14000 1,342/13,423 248 203 50 50 60 - 108 11.11
NHC-23000 2,051/21,627 286 235 50 62 70 - 137 19.05
NHC-35000 3,064/32,024 286 235 74 75 89 - 146 25.85
NHC-65000 ** ** ** ** ** ** **
*32 to 51 Heads †56 to 75 Heads §Steel Cylinders Only **Please inquire for additional information.
Norbar Inline hydraulic ratchet wrenches require minimum clearance while applying torque on the same plane as the nut, providing a marked improvement over square drive socket wrenches. Our patented design breakthrough reduces the overall dimensions of the inline ratcheting head allowing it to fit almost every application.
Norbar Torque ToolS - HyDraulic WreNcHeS
NSD Series NHC/L SeriesNorbar square drive hydraulic ratchet wrenches offer a cost efficient option to handle a wide range of bolt tightening and break-out needs. The NSD Series ratchet wrench employs a “patented design” which increases accuracy and reduces the number of moving parts. Our robust and lightweight aluminum body completely encloses the drive train assembly keeping the crucial lubricant inside the tool while significantly reducing the opportunity for outside elements to contaminate the inside of the tool.
For more information on torque and tension products, visit our website: www.norbar.com
Square Drive - Tool Specifications
Hex Link - Tool Specifications
New ZealaNd
65A O’Rorke RoadPenrose Auckland NZTel: +64 (0)9 579 8653Fax: +64 (0)9 579 8654Email: [email protected]
westerN australia
Unit 3/95 Bannister RoadCanning Vale WA 6155Tel: +61 (0)8 9455 7717Fax: +61 (0)8 9455 7979Email: [email protected]
QueeNslaNd
Unit 5/55 Donaldson RoadRocklea QLD 4106Tel: +61 (0)7 3216 7600Fax: +61 (0)7 3216 6392Email: [email protected]
Victoria
Unit 6/810 Princes HighwaySpringvale VIC 3171Tel: +61 (0)3 9562 3382Fax: +61 (0)3 9562 3072Email: [email protected]
south east asia / siNgapore
60 Kaki Bukit Place#09-16 Eunos Tech-PackSingapore 415979Tel: +65 6841 1371Fax: +65 6841 1372Email: [email protected]
New south wales
Unit 33/72 - 80 Percival RoadSmithfield NSW 2164Tel: +61 (0)2 9725 2831Fax: +61 (0)2 9604 0951Email: [email protected]
head office - south australia45-47 Raglan Avenue, Edwardstown SA, 5039 Australia
Tel: +61 (0)8 8292 9777 Fax: +61 (0)8 8292 9799Email: [email protected]
www.norbar.com
NSD Series
Square Drive (in)
Min/Max,N.m
@10,000 p.s.i (+\- 3%)
Min/Max,lbf.ft
@10,000 p.s.i (+\- 3%)
Weight*(kg)
Reaction Area - RA
(mm)
Length L1
(mm)
Length L2
(mm)
Length L3
(mm)
Radius R
(mm)
Height H1
(mm)
Height H2
(mm)
Width W1
(mm)
Width W2
(mm)
Width W3
(mm)
NSD-1900 ¾ 194-1,874 143-1,382 2.38 94 40 133 151 30 104 145 50 69 56
NSD-4500 1 355-3,960 262-2,921 5.10 136 47 183 202 32 124 166 70 91 81
NSD-8000 1-1/2 765-6,928 564-5,110 7.80 139 55 193 214 44 151 199 76 114 89
NSD-15000 1-1/2 1,407-14,633 1,038-10,793 13.56 165 57 222 239 52 187 232 99 136 127
NSD-27000 2-1/2 2,377-24,315 1,753-17,934 28.12 191 88 264 295 76 233 274 126 189 141
NSD-40000 2-1/2 3,577-34,986 2,638-25,804 34.01 191 88 276 298 79 248 289 149 213 141
NSD-60000† 2-1/2 ** ** 65.77 189 186 318 338 83 285 320 146 210 140
NSD-80000† 2-1/2 ** ** 133.80 223 150 373 406 95 356 396 184 248 146
*Weight includes tool, reaction member and square drive. †Steel Casting **Please inquire for additional information.
Hydraulic torque MultipliersSquare drive (NSd) Series Norbar square drive hydraulic ratchet wrenches offer a cost efficient option to handle a wide range of bolt tightening and break-out needs. The NSD Series ratchet wrench employs a “patented design” which increases accuracy and reduces the number of moving parts. Our robust and lightweight aluminum body completely encloses the drive train assembly keeping the crucial lubricant inside the tool while significantly reducing the opportunity for outside elements to contaminate the inside of the tool.
Square Drive - Tool Specifications
Hydraulic torque MultipliersHydraulic cylinder/link (NHc/l) SeriesNorbar Inline hydraulic ratchet wrenches require minimum clearance while applying torque on the same plane as the nut, providing a marked improvement over square drive socket wrenches. Our patented design breakthrough reduces the overall dimensions of the inline ratcheting head allowing it to fit almost every application.
NHCSeries
Min-Max, N.m @10,000 p.s.i (+\-
3%)
Min-Max, lbf.ft@10,000 p.s.i (+\-
3%)
Length (mm)
Height(mm)
Body Width(mm)
Head Width(mm)
Range(mm)
Weight with Head
(kg)
NHC-1800 159-1,754 117-1,294 159 102 28 24 19 - 51 3.29
NHC-4500 399-4,168 294-3,074 178 146 37 27* or 30† 32 - 75 4.20
NHC-9500 904-9,354 667-6,899 235 159 38 38 51 - 98 6.35
NHC-14000 1,342-13,423 990-9,900 248 203 50 50 60 - 108 11.11
NHC-23000 2,051-21,627 1,513-15,951 286 235 50 62 70 - 137 19.05
NHC-35000 3,064-32,024 2,260-23,620 286 235 74 75 89 - 146 25.85
NHC-65000 4,711-60,720 3,475-44,785 ** ** ** ** ** ** *32 to 51 Heads †56 to 75 Heads §Steel Cylinders Only **Please inquire for additional information.
Norbar Hydraulic Cylinder/Link Tool Specifications
Hex Link SpecificationsNHL-1800 Heads
(mm)NHL-4500 Heads
(mm)NHL-9500 Heads
(mm)NHL-14000 Heads
(mm)NHL-23000 Heads
(mm)NHL-35000 Heads
(mm)NHL-65000 Heads
(mm)
ATF Radius P/R ATF Radius P/R ATF Radius P/R ATF Radius P/R ATF Radius P/R ATF Radius P/R ATF Radius P/R19 27 10 32 35 9 51 46 12 60 51 11 70 64 23 86 74 24 115 100 3327 30 9 37 37 9 56 48 12 65 55 12 75 67 23 95 81 26 125 105 3332 33 9 41 40 9 60 51 12 70 61 14 76 69 25 105 85 25 135 110 3337 36 9 46 43 10 65 55 12 75 65 13 86 74 25 115 91 25 145 116 3242 38 9 48 45 12 70 61 14 76 67 16 95 81 26 125 98 25 155 121 3246 41 9 51 45 10 75 65 13 86 72 24 105 85 26 135 104 26 165 127 3251 44 9 56 48 10 76 67 16 95 78 24 115 91 26 145 110 28 175 133 32
60 50 10 86 72 16 105 83 24 125 99 26 185 138 3265 54 12 95 77 16 135 104 2670 57 1275 60 12
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
air Powered consoles
Air Powered Console Model Number
Oil Delivery per Minute
Oil Reservoir (Litre)
Usable Oil (inches3)
Overall Width (cm)
Overall Length (cm)
Overall Height (cm)
Pump Weight w/ Oil (kg)
NOR-SAHC465 in³ @100psi
9.46 590 42 24.1 50.3 29.555 in³ @ 10,000psi
• Use where air is the preferred source of power • Powerful 3hp motor starts under load • External adjustable pressure regulator • Retract side internal relief valve protects tool • Use for double or single acting tools
Air Motor, Air Control
• 3hp, 50 cfm @ 80 psi • Pneumatic remote control with 30-foot
cord
electric Powered consoles
Electric Powered Console
Model Number
Oil Delivery per Minute
Oil Reservoir (Litre)
Usable Oil (inches3)
Overall Width (cm)
Overall Length (cm)
Overall Height (cm)
Pump Weight w/ Oil (kg)
NOR-SEHC704 in³ @100psi
9.46 525 43.5 24.1 46 34.156 in³ @ 10,000psi
These pumps have been continually upgraded over the last 40 years and some of the originals are still in service! Equipped with a 1-1/8 horse power, single phase, universal motor; they have a noise level of 90-95 dBA. These power consoles offer the best weight to performance ratio of any of our electric/hydraulic pumps. CSA rated for intermittent duty.
• Two-speed high performance pump • External adjustable pressure regulator • Retract side internal relief valve protects tool • Hand remote • Use for double or single acting tools • Remote control with 30-foot cord
Electric Motor
• 1-1/8 hp, 12000 rpm Remote control with 30-foot cord
• 115V, 25 amps • 110V/50Hz, 25 amps
Electric Control
• 220V/50Hz, 13 amps
electric Powered console (Nor-Ht230)
Model NumberMotor Voltage
Electricity PowerMaximum Nameplate
Current
Maximum Advance Pressure
Pressure @15 Amp Motor Current (with 80° F - 100° F Oil
Temp)
Retract Pressure
NOR-HT230 230 V 50 Hz 1.5 KW 10.5 A 700 bar n/a 120 bar1 Phase 2Hp 10,150 psi n/a 1.740 psi
Hydraulic power unit engineered to continuously and reliably operate a variety of hydraulically powered torque wrenches operating up to 700 bar / 10,150 psi.
This compact design utilises a finned housing with integral fan that eliminates the need for an external cooler. Directly mounted pressure
and directional control valves eliminate additional plumbing and potential leak points while keeping the unit compact.
This unit includes pendant control for manual advance and automatic retract operation.
Model Number"Advance Flow Rate (0-100 bar / 0-1500
psi )"
"Advance Flow Rate (100-700 bar /1,500-10,1500
psi )"
Reservoir Capacity
Usable OilNoise
Level @ 300 bar
Unit Weight w/Oil
Control Pendant Length
NOR-HT230 340 in3/min 67 in3/min 3.7 Litre 1.7 Litre 68–70 dB 34 kg 6 meter
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com
Harsh environment range (He)Norbar has developed a range of measurement and calibration equipment that has been tested to conform with EN 60529: 1992.
Rated to IP65/IP67 the products are aimed specifically for use in harsh environments.
Particularly suited for use in the Offshore and Power Generation industries, the combination of high quality components, sound design and many years field experience allow calibration and control in previously restrictive areas.
The IP65/IP67 rating gives the product protection against dust ingression, pressurised water jet and complete water immersion to a 1 metre depth for a 30 minute period.
The HE range provides a fully traceable system to National calibration standards through Norbar’s own UKAS accredited laboratory.
Harsh Environment Instrument in water tight carry case.
5000 N.m Static Transducer
Back panel. Two connector covers removed for illustration.
Key features• IP65/67 rated.• Stainless steel transducer design with ‘SMART’ intelligence.• Bi-direction calibration for both instrument and transducer.• Class 1 accuracy over the ‘Primary’ classification range (+/-0.5% of reading
from 20 to 100% of full scale).• Battery power for use in harsh environments (mains supply for
charging).• Continuous RS-232 output.• Analogue output.• Limit indication for up to 8 user defined target values. • HE transducers are available in both static and annular
transducer designs.• Supplied in a water tight carry case.
He transducersPart No. Description
50736.xxx 500 N.m Static Transducer 3/4” M/F sq. dr.
50737.xxx 500 lbf.ft Static Transducer 3/4” M/F sq. dr.
50738.xxx 1000 N.m Static Transducer 1” M/F sq. dr.
50739.xxx 1000 lbf.ft Static Transducer 1” M/F sq. dr.
50751.xxx 3000 N.m Static Transducer 11/2” M/M sq. dr.
50705.xxx 5000 N.m Static Transducer 11/2” M/F sq. dr.
50729.xxx 5000 N.m Static Transducer 11/2” M/M sq. dr.
50706.xxx 5000 lbf.ft Static Transducer 11/2” M/F sq. dr.
50730.xxx 5000 lbf.ft Static Transducer 11/2” M/M sq. dr.
50728.xxx 10000 N.m Static Transducer 21/2” M/F sq. dr.
50726.xxx 25000 N.m Static Transducer 31/2” M/M sq. dr.
50727.xxx 40000 N.m Static Transducer 31/2” M/M sq. dr.
50744.xxx 100000 N.m Static Transducer 31/2” M/M sq. dr.
50743.xxx 100000 lbf.ft Static Transducer 31/2” M/M sq. dr.
50767.xxx 1000 N.m Annular Transducer
50745.xxx 3500 N.m Annular Transducer
50725.xxx 10000 N.m Annular TransducerOther Transducers available on request.
He Instrument and ancillariesPart No. Description
43217 TTL-HE instrument
60245.200 HE transducer Lead
60250.200 HE Inst to Standard Smart Static TD Lead
60263.200 HE Inst to Standard Smart Rotary TD Lead
60266.200 HE Transducer to TTT/TST Lead
60256.200 Serial Data Lead for TTL-HE to no connector
60257.200 Ancillaries output lead for TTL-HE to no connector
Introduction
91
Hydraulic tool calibration FixturesNorbar’s Hydraulic Tool Calibration Fixture is a robust device that allows accurate testing of hydraulic torque wrenches. A system comprises of a Calibration Fixture and Transducer from the tables below. Also required is a torque measuring instrument, see pages 76 - 81 and transducer cable, see page 86.
• Bearing support for transducer gives improved accuracy.• Interchangeable stainless steel square and round reaction posts.• Hardened steel inserts to locate reaction posts in two positions: suits most hydraulic
wrenches.• Optimised material sections for robust but portable design.• For hexagon link wrenches, a wide range of hexagon to square adaptors is available. Contact Norbar for information.
aPI Intervention tool test PotsThese reaction pots allow for the accurate testing of API rotary intervention tools.• Conform to ISO 13628-8:2002(E).• Customer specific solutions also available.• Lightweight all aluminium construction.• Incorporated lifting handles.• Eye bolts provided on larger units• Optional deck mount kit available, Part No. 81018..
Class 4 Intervention Tool Test Pot Kit includes: Pot, TTL-HE instrument, HE Transducer, Transducer lead and waterproof case.
80021 with Transducer fitted.
Hydraulic tool calibration FixturesPart No. Capacity
Square Drive
80021 7000 N.m 11/2”
80022 50000 N.m 21/2”
80023 80000 N.m 31/2”
Sleeve adaptorsPart No. Male Square
Female Square
Max Torque
86034.4 11/2” 3/4” 1200 N.m
21214 11/2” 1” 3500 N.m
29617 21/2” 11/2” 10500 N.m
29618 31/2” 21/2” 50000 N.m
transducersPart No. Description For use with
50703.xxx 250 - 2500 N.m 11/2” sq. dr. 80021
50704.xxx 250 - 2500 lbf.ft 11/2” sq. dr. 80021
50599.xxx 500 - 5000 N.m 11/2” sq. dr. 80021
50630.xxx 500 - 5000 lbf.ft 11/2” sq. dr.. 80021
50669.xxx 700 - 7000 N.m 11/2” sq. dr.. 80021
50776.xxx 1000 - 10000 N.m 21/2” sq. dr. 80022
50777.xxx 1000 - 10000 lbf.ft 21/2” sq. dr. 80022
50778.xxx 2500 - 25000 N.m 21/2” sq. dr. 80022
50779.xxx 2500 - 25000 lbf.ft 21/2” sq. dr.. 80022
50780.xxx 3000 - 30000 lbf.ft 21/2” sq. dr. 80022
50781.xxx 5000 - 50000 N.m 21/2” sq. dr. 80022
50782.xxx 6000 - 60000 lbf.ft 31/2” sq. dr. 80023
50783.xxx 8000 - 80000 N.m 31/2” sq. dr. 80023Harsh Environment Transducers available on request.
Test Pots and KitsPart No. Description
80019 Class 4 Pot
60278.xxx Class 4 Kit
80020 Class 7 Short Pot*
60279.xxx Class 7 Short Kit** FMC. Receptacle to suit ‘short’ FMC style Class 7 rotary torque intervention tools.
T +61 (0)8 8292 9777 | F +61 (0)8 8292 9799 | E [email protected] | www.norbar.com