nm) nm) purposespatial resolution (km) 317.51ozone, so 2, uv8 3251ozone8 3403aerosols, uv, and...
TRANSCRIPT
(l nm) (Dl nm) Purpose Spatial Resolution
(km)
317.5 1 Ozone, SO2 , UV 8325 1 Ozone 8340 3 Aerosols, UV, and Volcanic Ash 8388 3 Aerosols, Clouds, UV and Volcanic
Ash8
443 10 Blue, Aerosols, Veg 8555 10 Green, Aerosols, Veg 8680 2 Red, Aerosol, Veg., O2 B-Band 8687.6 1.7 O2 B-Band Cloud Height 8870 760.7 763.3
15 3 Clouds, Vegetation A-Band Absorbing
8
905 779.5 30 3 Precipitable water A-Band Reference
8
DSCOVR EPIC FILTER CHOICES
• O2 A-Band:PROS• Greater sensitivity to cloud height• Detect Aerosols
CONS• Sensitivity to Temperature• Sensitive to surface reflectivity• Measures over Oceans only
• O2 B-Band:PROS• Cloud height over Land• Can be combined with A-Band• Low sensitivity to Temperature• Low Surface Reflectivity
CONS• Less altitude sensitivity• Not useful for thin aerosols
O2 A- and B-bands are Complimentary
The Effect of Surface Reflectivity
O2 B-Band Has Less Sensitivity to Vegetation than O2 A-Band680 nm would be a better reference wavelength than 645 nm
688 nm O2 B O2 A 763.3 nm
680
Current EPIC Filter645±5 nmRGB and Veg. IndexReference for Cloud Height
O2 B-Band Filter688±1 nmCloud Height
680±2 nm Replacement for 645RGB and Veg. IndexNew Reference for Cloud Height
779.5
New EPIC channels for Vegetation
- Current EPIC filter 645 nm (similar to MODIS) will be replaced by 680 nm, the reference channel for O2 B-band.
- Current EPIC filter 870 nm (MODIS has 860) will be replaced by 780 nm, the reference channel for O2 A-band.
- New EPIC NDVI will be defined as (R780-R680)/(R780+R680).
At 680 nm vegetation reflects less than at 645 nm.At 780 nm reflectance from vegetation is not yet fully saturated and reflects less than at 870 nm.
680 685 690 695 700
0.5
0.6
0.7
0.8
0.9
1.0
Nor
mal
ized
Alb
edo
Wavelength (nm)
DesertClear
Cloudy
GOME DATA for O2 B-Band
687, 0.53
687, 0.72
= 0.2 nm
SZA = 17o
0.72/0.53=1.35
755 760 765 770 775 780 785 790 7950.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3GOME DATA for O
2 A-Band
= 0.2 nm
SZA = 17o
763.5, 0.62
No
rmal
ized
Alb
edo
Wavelength (nm)
Cloud Desert
Reference Filter780 +/- 1.5 nm
763.5, 0.35
0.62/0.35 = 1.77
Comparison for O2 A and B Bands for theSame pair of scenes – Clear and Cloudy
Normalized albedo from GOME data at spectral resolution of 0.2 nmFor a clear desert scene at 0 km and a cloudy scene at 6 kmMaximum Difference:D(B-band) = 0.19 D (A-band) = 0.27
• B-Band at 2 nm width A-Band at 3 nm width• Cloud height = 6 km based on radiative transfer simulation• A-Band sensitivity is better than B-Band by a factor of 4• Assume EPIC SNR = 250 (max) or 0.25% precision for Cloud scene• SNR = 100 or 1% precision for Clear scene
Comparison for O2 A and B Bands for theSame pair of scenes – Clear and Cloudy
EPIC Filter Resolution
680 685 690 695 700
0.80
0.85
0.90
0.95
1.00
Filter = 0.88 +/- 0.002
Filter = 0.8 +/- 0.008 = 2 nm
SZA = 17o
GOME DATA for O2 B-Band
Nor
mal
ized
Alb
edo
Wavelength (nm)
Cloud SNR=250Height = 6 km
Clear DesertSNR = 100
= 0.08 +/- 0.01H = 6 +/- 0.75 km
755 760 765 770 775 780 785 790 7950.300.350.400.450.500.550.600.650.700.750.800.850.900.951.001.051.10
= 0.23 +/- 0.007H = 6 +/- 0.18 km
Clear DesertSNR = 100
Cloud SNR=250Height = 6 km
GOME DATA for O2 A-Band
780 nm
Filter Avg. =0.50 +/- 0.005
No
rmal
ized
Alb
edo
Wavelength (nm)
Filter Avg. =0.73 +/- 0.002
= 3 nm
SZA = 17O
Cloud
Clear
AEROSOLS O2 A-Band using 1 nm Filter width763.5±1.5 Overlay
Saturated
763.5±1.5
Aerosols A-band
Dependence of results on SZA and Plume Height
• Dependence for different aerosol layer heights.• At maximum absorption (in Q-branch), sensitivity to aerosol layer height is low for H≤3 km.
Aerosol Comparison: 761 nm and 763.5 nm
Figures below show a ratio of L to a reference channel
• Less absorbing channel 763.5 has a better sensitivity to an effective aerosol layer height.
• In 761 nm channel, sensitivity to low tropospheric aerosols is strongly reduced at high SZA (and at low AOT).
• Overall, sensitivity over the ocean is good enough for the aerosol height assessment.
Results at 1 nm SRS (50 µm water cloud)
Dependence of integrated results on SZA(normalized radiance L=Rcos(SZA) )
• Dependence L(SZA) for different cloud top heights.• Sensitivity to cloud layer height is similarbetween 761 and 763.5nm.
Comparison of channels 761 nm and 763.5 nm
Figures below show a ratio of L to a reference channel (in this case @ 0.759nm)
• Channels 761nm and 763.5nm have similar sensitivity to cloud top height, but the SNR is better at 763.5 nm.
• Because of residual absorption structure, retrievals based on band 763.5 will be more sensitive to potential band center shift.
• While the less absorbing channel 763.5 nm is preferable for aerosol height assessment, the more absorbing channel 761 nm may have better sensitivity for cloud top height assessment, especially for thin cirrus.
•This study is currently in progress.