เทคโนโลยีใหม่ magnetic measurement system และ encoder

เทคโนโลยี�ใหม่� Magnetic Measurement

Systemและ

Encoder

COMPOMAX

โดยี สั�งข์�ข์�ด หน�สั�ข์

LINEPULS Magnetic Measuring Systems

ระบบการวั�ดโดยีอาศั�ยีหล�กการข์องสันาม่แม่�เหล�ก

Magnetic Measurement System



• The resulting signals are interpolated to obtain the required resolution (PPR/mm)

• The same principle is also suitable to rotary transducers (circular magnets)

• The system is composed by a magnetic tape with alternated north-south poles

• A sensor, sensitive to magnetic fields, moves contactless along the tape

• The sensor converts the magnetic field in a sinusoidal electric signal

• With 2 sensors in phase delay of a 1/4 of period a sin + cos signal is obtained

MTxx magnetic tape forincremental measurements

• in plastic and steel

• temperature coefficient: 11±1 μm/k

• several polar pitches available

• accuracy classes: ±100 μm/m, ±50 μm/m, ±10 μm/m

• roll lenghts: up to 100 m


SME5 general purpose sensor with integrated converter

• resolution from 5 to 50 µm

• speed 16 m/s max.

• real-time output signals

• max. gap tape-sensor: 2,0 mm

• system composition: SME5 + MT50 + display or counter



SME1 high resolution sensor for feedback applications

• resolution from 25 to 1 µm

• max. counting frequency 3 Mhz

• max. gap tape-sensor 0,4 mm

• max speed 3 m/s

• system composition: SME1 + MT10 + display

• linear motors

• tool machines

• measuring equipment

• microelectronics, IC industry

• compatible with Siko’s MSK100


SME1 high resolution sensor for feedback applications

MRI standard magnetic

rings

• AB,/AB output signals• suggested sensors : SME2,

SME5• accuracy up to 0,15• small standard rings with

hollow shaft support• different sizes available


• for rotary measurements with magnetic sensors


MRI standard magnetic

rings

MRI customer specific rings

• up to 500 mm• 1 or 2 tracks possible• accuracy up to 0,15• initial design cost for prototypes• convenient for special applications


SMK universal sensor with integrated converter


• resolution from 1 to 0.01 mm

• travel speed: 2.5 m/s max.

• max. gap tape-sensor 4,0 mm

• burst output (<20 kHz real-time)

• system composition: SMK + MT50 + display or counter


SMK universal sensor with integrated converter

• simple machines

• low precision machines

• special resolutions

• Stock types available

Reference pole R for SME5 SME2 SME1 SMS

• fixed reference along the magnetic tape

• reference signal detected by the sensor

• led indication• pole support LKM-1309/xx• multiple reference possible• easy position adjustment



SMB2 small sensor with external converter

• when a small sensor is needed

• converter can fit into cable-rail

• settings can not be changed

SMx sensors with separate converter


• travel speed: 16 m/s max

• Mini-Din connections

• system compositions:

SM5(SM2) + MT50(MT20) + display

SM5 + MT50 + E-BOX

SM5 + MT50 + LD120

SM25 +MT25 + LD140

SMx sensors with separate converter

• To be used with E-box and LDxxx displays

• where small size is a must


EBOX external converter for SMx sensors


• programmable resolution and output

• resolutions 50-25-20-12,5-10 µm

• accuracy as per magnetic tape MT50

• IP40

• connections: D-sub 9 pin

LD140 battery LCD display


• 6 digits, standard display features

• battery power supply: 1,5 v

• resolutions 0.01, 0.05, 0.1, 1 mm

• measurement speed: <10 m/s max.

• use with SM25 sensor + MT25 tape

• RS232, 3 offsets, 360° display

• fractional inch display

• woodworking machines

• metalcutting machines

• digital calipers

• round tables (360°setup)


• new SW since march 2006

• equivalent to Elgo’s Z16





• OEM version

• to be used with MT25 and SM25

• all software features like LD140

• fixed connection SM25-R sensor

• customer can fit the unit into his own housing/machine part


LD142 battery LCD display with SM25 sensor

• connected to SM25-R sensor

• all software features like LD140

• stock item LD142-M7-R-0,3

SMA5 absolute magnetic sensor

• up to 5 m measuring length• integrated SSI interface• 0,005 mm resolution• zero setting function• complementary function• IP67• to be used with MTA

magnetic tape

LINECOD Magnetic Measuring Systems


SMA5 absolute magnetic sensor

• insensitive to power outages

• safe measurement system

• linear motors

• tool machines


• compact design

MTA5 absolute magnetic tape

• in plastic and steel

• absolute magnetic coding

• accuracy class ±50 μm/m

• temperature coefficient: 11±1 μm/k

• lenght available: up to 5.1 m


MC221 – 2 axis display

POSICONTROL - Displays

• compact 96 x 96 x 72 mm

• 6 digits LED

• 2 x AB inputs

• counting frequency 90 kHz

• power: 24Vdc, 24Vac, 115Vac, 230Vac

• 2 outputs x 24 V relay (O2)

• RS232 interface

• for 2 sensors/encoders simultaneously

LD200: Universal programmable display

• 96 x 48 x 69 mm• 8 digits, LED 10 mm• power supply: 18Vac, 24Vdc

20%• Max. 500 kHz counting

frequency• inputs: AB0, SSI, 1Vpp, SMx

sensor• RS232 interface• 3 x 24V digital outputs @ 50mA• IP54 protection (when mounted)

• universal usage, ideal as stock unit• easy set-up (intelligent menue) • easy connection with block terminals and Dsub conn. • very compact, with mounting clips

POSICONTROL Displays

possible device typesE_IncrPP,LD (A, B, 0)

E_1VppSIN/COS 1Vpp

E_SSIabsolute SSI

M_SensLika magnetic sensors

SM2, SM25, SM5

M_IncrPP, LD (A, B, O)

M_1VppSIN/COS 1Vpp

M_SSIabsolute SSI

POSICONTROL Displays

LD200

เทคโนโลยี�สัม่�ยีใหม่�ข์อง

Encoder

ROTAMAG Magnetic encoders

ROTAMAG Magnetic encoders

MA58 MA58S MAC58 absolute magnetic encoder

• For high shock and moisture conditions

• Based on the AS58, AS58S, ASC58 housing

• 12 bits x 16 bits max. • SSI or BISS output interface• Operating temperature

-25°C÷+85°C max• IP67

www.lika.bizwww.lika.biz

เทคโนโลยีใหม่ magnetic measurement system และ encoder

Documents