lighting fixtures sha\ l be mounted to the underpass lighting fixtures shall be mounted to the...
TRANSCRIPT
N
KLEINFELDER - ONE BEACON STREET, SUITE 8100 | BOSTON, MA, 02108 | PH:617.497.7800 | FAX:617.498.4630 | www.kleinfelder.com
SA
CR
AM
EN
TO S
TRE
ET
UN
DE
RP
AS
S D
ES
IGN
CIT
Y O
F S
OM
ER
VIL
LE, M
AS
SA
CH
US
ETT
S
DA
TE
PR
OJE
CT
NO
.
DR
AW
N B
Y
CH
EC
KE
D B
Y
FILE
NA
ME
01/1
4/20
19
2018
3285
RE
VIS
ION
S
SHEETVINCENT A. DiIORIO, INC.CONSULTING ENGINEERS
89 Access Road Suite EighteenNorwood, Massachusetts 02062
tel: (781) 255-9754 email: [email protected]
JWR
VA
D J
R
E-1
ELE
CTR
ICA
L LE
GE
ND
, NO
TES
, PLA
N &
PH
OTO
ME
TRIC
S
LUMINAIRE SCHEDULE
Symbol Label Qty Lumens LLF WattsCatalog Number Description Lamp
A 6 Absolute 1.00 53.2VRW-4-48-40K-MV PEERLESS VANDAL
RESISTANT LEDLUMINAIRE WITHPRISMATIC LENS
LUMEN OUTPUT = 4807LMS.
STATISTICS
Description Symbol Avg Max Min Max/Min Avg/Min
Tunnel 35.1 fc 42.9 fc 13.4 fc 3.2:1 2.6:1
Calculated values include direct and interreflected components.
18.3
19.9
19.8
18.0
25.0
28.2
28.2
25.0
31.2
35.7
35.5
30.9
33.2
37.9
37.8
33.0
32.6
36.9
36.8
32.4
34.1
38.7
38.6
33.9
36.8
42.1
41.9
36.5
36.5
41.6
41.5
36.2
34.5
39.1
38.9
34.4
35.2
40.0
39.9
35.1
37.6
42.8
42.7
37.3
37.1
42.2
41.9
36.8
34.9
39.3
39.3
34.7
35.4
40.2
40.1
35.2
37.6
42.8
37.4
37.0
42.1
42.0
36.7
34.8
39.2
39.1
34.5
35.3
39.9
39.8
35.0
37.3
42.4
42.3
36.9
36.3
41.3
41.0
35.8
33.5
37.8
37.6
33.1
33.1
37.4
37.3
32.7
33.3
38.0
37.8
32.9
29.7
33.7
33.5
29.3
22.8
25.4
25.3
22.7 16.5
13.4
42.9
A A A A A A
AutoCAD SHX Text
CONC PAD W/ELEC CABINET
AutoCAD SHX Text
6'CLF
AutoCAD SHX Text
CONCRETE RAMP
AutoCAD SHX Text
CONCRETE RAMP
AutoCAD SHX Text
CONCRETE RAMP
AutoCAD SHX Text
6'CLF
AutoCAD SHX Text
CONCRETE STAIRS
AutoCAD SHX Text
RIGID "T" CONDUIT BODY TO MATCH EXISTING CONDUIT SIZE (TYPICAL)
AutoCAD SHX Text
EXISTING 12"X12" JUNCTION BOX TO REMAIN
AutoCAD SHX Text
EXISTING PAD MOUNTED CONTROL BOX TO REMAIN
AutoCAD SHX Text
NEW 1" RIGID STEEL 90° ELBOW FROM"T" FITTING TO THE END OF THE LIGHT FIXTURE W/ 2#10 & 1#10GRD. (TYPICAL)
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
A
AutoCAD SHX Text
FIXTURES SHALL BE INSTALLED IN EXISTING CONCAVE PORTION, BEAM BAYS OF THE UNDERPASS (TYPICAL)
AutoCAD SHX Text
NOTE: 1. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVING ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVING ALL EXISTING LIGHT FIXTURES, CONDUIT ELBOWS & EXISTING BRANCH CIRCUIT WIRING BACK TO THE POWER SOURCE. 2. ELECTRICAL CONTRACTOR SHALL DISPOSE OF ALL EXISTING LIGHT ELECTRICAL CONTRACTOR SHALL DISPOSE OF ALL EXISTING LIGHT FIXTURES & ANY OTHER ELECTRICAL CONSTRUCTION DEBRIS IN A PROPER MANNER. 3. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR PROVIDING ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR PROVIDING A CONDUIT SEAL/PLUG IN ANY ABANDONED-IN-PLACE "T" FITTINGS PRIOR TO COMPLETION. 4. LIGHTING FIXTURES SHALL BE MOUNTED TO THE UNDERPASS LIGHTING FIXTURES SHALL BE MOUNTED TO THE UNDERPASS THROUGH THE USE OF BOLTS WITH EXPANSION SHIELDS, TOGGLE BOLTS, OR WELDED THREADED STUDS ON METAL. THREADED STUDS OF PROPER HOLDING CAPACITY (50LB MINIMUM) SHALL BE PROVIDED WITH LOCK WASHERS AND NUTS. PRESET INSERTS OF THE PROPER TYPE AND HOLDING CAPACITY (50LB MINIMUM) IS ACCEPTABLE IN OVERHEAD SLAB CONSTRUCTION.
AutoCAD SHX Text
A
AutoCAD SHX Text
%%ULIGHTING
AutoCAD SHX Text
%%UELECTRICAL LEGEND:
AutoCAD SHX Text
LP1-1,3
AutoCAD SHX Text
LP1-1,3
AutoCAD SHX Text
4' L.E.D. LIGHT FIXTURE. "A" DENOTES FIXTURE TYPE.
AutoCAD SHX Text
%%UWIRING
AutoCAD SHX Text
HOMERUN - CABLE LP1 - DENOTES PANELBOARD - DENOTES PANELBOARD 1,3 - DENOTES CIRCUITS - DENOTES CIRCUITS "TICKS" INDICATE NUMBER OF CURRENT CARRYING CONDUCTORS IN THE RUN
AutoCAD SHX Text
HOMERUN - PIPE. SEE NOMENCLATURE ABOVE
AutoCAD SHX Text
CONDUIT TURNING UP
AutoCAD SHX Text
CONDUIT TURNING DOWN
AutoCAD SHX Text
CONDUIT STUB
AutoCAD SHX Text
WIRE BREAK
AutoCAD SHX Text
NORMAL POWER WIRING
AutoCAD SHX Text
EXISTING CONDUIT TO REMAIN
AutoCAD SHX Text
%%UCONDUIT BODIES
AutoCAD SHX Text
RIGID "T" CONDUIT BODY
AutoCAD SHX Text
GENERAL NOTES 1. PERFORM ALL WORK IN ACCORDANCE WITH NATIONAL AND STATE ELECTRICAL PERFORM ALL WORK IN ACCORDANCE WITH NATIONAL AND STATE ELECTRICAL CODES, LOCAL ORDINANCES, AND REQUIREMENTS OF THE WIRING INSPECTOR. CODES INCLUDE BUT ARE NOT LIMITED TO: a. NATIONAL BUILDING AND ELECTRICAL CODES NATIONAL BUILDING AND ELECTRICAL CODES b. STATE CODES STATE CODES c. LOCAL TOWN BY-LAWS AND AGENCY REQUIREMENTS. LOCAL TOWN BY-LAWS AND AGENCY REQUIREMENTS. d. OTHER CODES AS LISTED ON ARCHITECTS CODE REVIEW TABLE WHERE OTHER CODES AS LISTED ON ARCHITECTS CODE REVIEW TABLE WHERE APPLICABLE. 2. MATERIALS MATERIALS a. ALL WIRING SHALL BE COPPER; CONDUCTORS WITH AMPACITIES OF 100 AMPS ALL WIRING SHALL BE COPPER; CONDUCTORS WITH AMPACITIES OF 100 AMPS OR LESS OR CONDUCTORS MARKED AWG #14 THROUGH #1 SHALL BE 60°C. (UNLESS EQUIPMENT IS LISTED FOR HIGHER TEMPERATURES.) b. GENERAL BRANCH WIRING SHALL BE SINGLE CONDUCTOR TYPE "THWN" (SIZE AS GENERAL BRANCH WIRING SHALL BE SINGLE CONDUCTOR TYPE "THWN" (SIZE AS INDICATED ON DRAWINGS). ALL PRODUCTS AND DEVICES SHALL BE NEW AND BEAR THE UNDERWRITERS' LABORATORIES LABEL. 3. PERFORM ALL WORK IN A WORKMANLIKE AND TIMELY MANNER SUBJECT TO THE PERFORM ALL WORK IN A WORKMANLIKE AND TIMELY MANNER SUBJECT TO THE APPROVAL OF THE ENGINEER. 4. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR ALL INSURANCE, PERMITS, ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR ALL INSURANCE, PERMITS, FEES AND BACKCHARGES REQUIRED FOR THE PERFORMANCE OF HIS/HER WORK. 5. ELECTRICAL CONTRACTOR SHALL COORDINATE THE ELECTRICAL WORK WITH ALL ELECTRICAL CONTRACTOR SHALL COORDINATE THE ELECTRICAL WORK WITH ALL OTHER TRADES. ANY CONFLICT SHALL BE PRESENTED TO THE GENERAL CONTRACTOR AND ENGINEER PRIOR TO INSTALLATION OF WORK. 6. PANEL DIRECTORIES SHALL REFLECT THE WORK PERFORMED UNDER THIS PANEL DIRECTORIES SHALL REFLECT THE WORK PERFORMED UNDER THIS CONTRACT. PANELS SHALL BE PROVIDED WITH TYPED DIRECTORIES. 7. ALL PRODUCTS SHALL BE GUARANTEED FOR ONE YEAR AFTER ACCEPTANCE BY ALL PRODUCTS SHALL BE GUARANTEED FOR ONE YEAR AFTER ACCEPTANCE BY OWNER. 8. ALL WIRING AND EQUIPMENT ARE DEPICTED DIAGRAMMATICALLY. FINAL LOCATIONS ALL WIRING AND EQUIPMENT ARE DEPICTED DIAGRAMMATICALLY. FINAL LOCATIONS SHALL BE DETERMINED IN THE FIELD AND ANY CONFLICTS SHALL BE BROUGHT TO THE ATTENTION OF THE ENGINEER. 9. SHOP DRAWINGS SHALL BE SUBMITTED ON ALL ELECTRICAL EQUIPMENT, BEFORE SHOP DRAWINGS SHALL BE SUBMITTED ON ALL ELECTRICAL EQUIPMENT, BEFORE PROCUREMENT OF EQUIPMENT. 10. ALL NEW WIRING INDICATED ON PLANS SHALL MATCH THE AMPACITY OF THE ALL NEW WIRING INDICATED ON PLANS SHALL MATCH THE AMPACITY OF THE CIRCUIT BREAKER INDICATED AT THE HOMERUN. WHERE NO BREAKER SIZE IS INDICATED, THE BREAKER SHALL BE 20A/1P WITH #12 AWG CABLE. 11. WIRE AND CONDUIT SIZES INDICATED ON HOMERUNS SHALL RUN CONTINUOUS WIRE AND CONDUIT SIZES INDICATED ON HOMERUNS SHALL RUN CONTINUOUS THROUGHOUT CIRCUIT. 12. ALL 120 VOLT BRANCH CIRCUITS WHEN 100 LINEAR FEET OR MORE FROM LAST ALL 120 VOLT BRANCH CIRCUITS WHEN 100 LINEAR FEET OR MORE FROM LAST OUTLET OR FIXTURE IN CIRCUIT TO RESPECTIVE PANELBOARDS SHALL BE A MINIMUM OF #10 AWG COPPER WIRE(S). 13. THE ELECTRICAL CONTRACTOR SHALL FURNISH AND INSTALL ALL LIGHTING THE ELECTRICAL CONTRACTOR SHALL FURNISH AND INSTALL ALL LIGHTING FIXTURES COMPLETE WITH MOUNTING ACCESSORIES TO MEET PROJECT CONDITIONS. 14. THE ELECTRICAL CONTRACTOR SHALL VERIFY FIXTURE MOUNTING AND EXACT THE ELECTRICAL CONTRACTOR SHALL VERIFY FIXTURE MOUNTING AND EXACT LOCATIONS AGAINST EXISTING CONDITIONS. 15. ALL FIXTURES SHALL BE SUPPORTED FROM THE EXISTING STRUCTURE. ALL FIXTURES SHALL BE SUPPORTED FROM THE EXISTING STRUCTURE. 16. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR AS-BUILT DOCUMENTATION. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR AS-BUILT DOCUMENTATION. 17. THE ELECTRICAL DEMOLITION NOTES INDICATE THE GENERAL INTENT AND ARE THE ELECTRICAL DEMOLITION NOTES INDICATE THE GENERAL INTENT AND ARE NOT INTENDED TO SHOW ALL ITEMS TO BE REMOVED OR RETAINED. THE ELECTRICAL CONTRACTOR SHALL VISIT THE SITE PRIOR TO THE SUBMISSION OF BIDS TO BECOME FAMILIAR WITH THE ACTUAL CONDITIONS AND EXTENT OF WORK. 18. THE ELECTRICAL CONTRACTOR SHALL IDENTIFY ALL BRANCH CIRCUITS, FEEDERS THE ELECTRICAL CONTRACTOR SHALL IDENTIFY ALL BRANCH CIRCUITS, FEEDERS AND SYSTEM COMPONENTS, WHICH ARE TO REMAIN WITHIN THE AREA OF DEMOLITION SCOPE. THERE SHALL BE NO INTERRUPTION OF SERVICE TO ANY AREA OUTSIDE THE SCOPE LIMITS WITHOUT APPROVAL FROM THE OWNER'S REPRESENTATIVE. 19. EQUIPMENT TO REMAIN IN PLACE AND OPERATIONAL DURING DEMOLITION SHALL EQUIPMENT TO REMAIN IN PLACE AND OPERATIONAL DURING DEMOLITION SHALL BE PROTECTED FROM DAMAGE AND/OR CONTAMINATION ASSOCIATED WITH THE CONSTRUCTION PROCESS. 20. EXTEND EXISTING INSTALLATIONS USING MATERIALS AND METHODS COMPATIBLE EXTEND EXISTING INSTALLATIONS USING MATERIALS AND METHODS COMPATIBLE WITH EXISTING ELECTRICAL INSTALLATION OR AS SPECIFIED. 21. THE ELECTRICAL CONTRACTOR SHALL CIRCUIT TRACE AND LABEL ALL EXISTING THE ELECTRICAL CONTRACTOR SHALL CIRCUIT TRACE AND LABEL ALL EXISTING BRANCH CIRCUITS AND FEEDERS WITHIN THE AREA OF DEMOLITION SCOPE PRIOR TO DE-ENERGIZING AND DISCONNECTION. ALL CIRCUITS WITHIN PANELBOARDS IDENTIFIED FOR REMOVAL SHALL BE TRACED AND LABELED TO ENSURE THAT NO AREA OUTSIDE THE DEMOLITION SCOPE LIMIT IS AFFECTED. OWNER SHALL BE NOTIFIED IF ANY CIRCUITS EXTEND BEYOND THE DEMOLITION AREA, PRIOR TO DE-ENERGIZING CIRCUIT. 22. ALL EQUIPMENT AND DEVICES REQUIRING DEMOLITION SHALL BE REMOVED WITH ALL EQUIPMENT AND DEVICES REQUIRING DEMOLITION SHALL BE REMOVED WITH ALL ASSOCIATED CONDUIT, WIRING, FITTINGS, SUPPORTS, ETC., BACK TO SOURCE OF SUPPLY UNLESS OTHERWISE INDICATED. 23. ALL REMOVED ITEMS SHALL BE LEGALLY DISPOSED OF UNLESS IDENTIFIED FOR ALL REMOVED ITEMS SHALL BE LEGALLY DISPOSED OF UNLESS IDENTIFIED FOR REUSE. THE OWNER'S REPRESENTATIVE SHALL INSPECT ALL RETAINED ITEMS PRIOR TO PLACEMENT IN THE IDENTIFIED STORAGE LOCATION BY THE ELECTRICAL CONTRACTOR. 24. ALL WIRING DEVICES AND EQUIPMENT IN AREAS ADJACENT TO DEMOLITION AREAS ALL WIRING DEVICES AND EQUIPMENT IN AREAS ADJACENT TO DEMOLITION AREAS SHALL BE RESTORED TO ORIGINAL CONDITION IF TEMPORARY DISRUPTION IS REQUIRED. FIELD VERIFY ALL DEVICES ON EACH CIRCUIT TO BE DEMOLISHED. OWNER SHALL BE NOTIFIED 24 HOURS PRIOR TO THE TEMPORARY POWER DISCONNECTION TO ADJACENT AREAS WHEN SUCH OCCURRENCE IS DEEMED NECESSARY. 25. PANELBOARDS SHALL BE DE-ENERGIZED PRIOR TO PERFORMING ANY WORK SUCH PANELBOARDS SHALL BE DE-ENERGIZED PRIOR TO PERFORMING ANY WORK SUCH AS INSTALLING/REMOVING BREAKERS, INSTALLING/REMOVING WIRING, ETC.
AutoCAD SHX Text
UNDERPASS PLAN
AutoCAD SHX Text
SCALE: 1/4" = 1'-0"
AutoCAD SHX Text
PHOTOMETRIC PLAN
AutoCAD SHX Text
SCALE: 1/4" = 1'-0"