kaishot€¦ · kaishot safety instruction 1 safety instruction replaced are the ones specified by...
TRANSCRIPT
● Please note that the manufacturer does not hold responsibility for troubles caused by the use of imitation parts.
● Please read "Safety Instruction" (page 1-3) carefully before
use in order to prevent personal injuries or damages to the product.
● The content of manual can be changed without any notice.
www.idfone.co.kr
The actual product may look different from the picture in the User Manual.
KAISHOT IDF-PVR(Series) User Manual Ver1.1
KAISHOT
Safety Instruction 1
Safety Instruction
This instruction is intended to protect user's safety and prevent any damages to the product. Please read this instruction before use and follow the instruction carefully.
Failure to comply may cause serious injuries or death
Do not dry this product with electronic heat source such as radiator, microwave, or stove when it gets wet. It may lead to explosion, change of shape, or out of order of the product, and the battery or product changes its color. In this case, product may not eligible for free services.
Do not use this product in hot and humid conditions out of the operational range specified. (Recommended operational temperature: -10℃ ~ 60℃ humidity: 20~85%RH ) When the product is used out of recommended operational environment, it may lead to explosion or out of order of the product. Please do not expose the battery under the direct sunlight in a closed area such as a car. It may explode, change the shape of the product, or become out of order.
When battery replacement is required, be sure that the parts replaced are the ones specified by the manufacturer, and not used for other purposes. When the battery of different brand is used, durability of the product may be reduced, or even may possibly lead to explosion. The product will not qualify for free service under such case. It is strongly recommended to use the battery referred by the manufacturer.
Keep the product out of children's reach. It is harmful for the health of children when they play with damaged battery or put it into the mouth. They may be exposed to harmful chemical solutions, electromagnetic wave, and/or electric shock.
Do not disassemble, modify, or strike the product. It may cause the fire.
Warning
KAISHOT
Safety Instruction 2
Press the power cord firmly when you plug it in to the outlet, and use the cord head when you unplug it in order to prevent damage to the cord. When the contact is not tight or a part of the cord is cut, it could lead to fire and/or heat over-generation. Please do not break the power cord and do not use them when the power outlet is loose. When the product is wet and/or your hands are wet, do not touch the outlet and the power cord.
Do not use liquid or aerosol cleaner or chemical solutions such as alcohol, benzene, or thinner to clean the product. It could cause fire and damage to the product. Please use dampened soft cloth for cleaning the product.
Failure to comply may lead to risk of injuries or loss of assets.
Do not place magnetic materials such as credit card, passbook, or transit passes near the product. You may lose the information contained on them. Data stored in the product may be damaged or lost.
When you do not use the product, disconnect the power source from the product and place on safe surface. The product will be damaged if the product is stricken, beaten, or shaken hard.
Do not paint the product. It may damage the screen and be a cause of malfunction. In case the debris from the paint causes allergic reaction, stop using the product and see the doctor.
Caution
KAISHOT
Safety Instruction 3
Place the battery in a room temperature when it is not used for long period of time after charged. When you need to use it again after long idle period, it is recommended to use it after recharging it fully. Even after the long idle period, the battery capacity may reduce gradually. When the duration of operation becomes substantially short, it is required to replace with a new battery.
Please keep the backup record for your original data. Data stored in the product may be damaged or lost while upgrading or repairing the product, or due to human errors. Please be advised that manufacturer and resellers will not be responsible for the damage to or loss of data.
Please do not connect this product to the other equipment or application with a method other than indicated in the User Manual. Some products may be affected by the electromagnetic wave from this product.
This product is suitable for use in household environment (Class B). Product can be used in all areas. -------------------------------------------------------------------------------------
[Certification]
KAISHOT
Before you use 4
Before You Use
Cautions Details
Connect all the peripherals to the unit prior to the operation.
Connecting or removing the peripherals during the operation may cause the damages or troubles.
Check the icon status.
If the wireless module, camera, GPS, or Micro SC Card has to connect to the unit while the power is on, it takes some time to be recognized. Use the function after checking the status of the icon. You will see the error message when the function is not ready to perform yet.
Refer to the appropriate section of the User Manual to change the Micro SD Card and follow the instruction.
When it is not handled accordingly, it may damage the Micro SD Card, or cause critical system errors.
Do NOT open the side cover.
It may damage Micro SD Card. Also, it may disturb a normal recording function, thus recording may not be stored properly.
Do not support continuous recording.
When you set up Backup Time with ‘0 min’, it should support continuous recording. But KAISHOT can record per one hour separately in order to operate system well
Apply LCD Saving Mode On.
We recommend that you apply LCD Saving Mode On to reduce the heat generation and battery consumption as little as possible. It is set as three (3) minutes by default.
Do NOT separate the battery from the unit during operation.
If battery is separated from the unit during operation, not through the proper steps indicated in the User Manual, it forcefully turns the system off, thus causing troubles in the system. If battery is separated in the middle of the recording operation, it may not store the date recorded.
Please check the battery capacity.
If remaining battery life is not sufficient, it may forcefully turn the system off.
KAISHOT
Contents 5
Contents
Safety Instruction
Before You Use
Contents
KAISHOT Introduction
KAISHOT Series Introduction
Components
The Name of Each Part
Connecting/Disconnecting Camera
Use of Battery
Micro SD Card Management
Outputting Video to the External Monitor
KAISHOT Preview
Recording Functions
Playback Functions
Transmission (Real-time) Functions
Checking Messages
GPS settings Functions
Setup
Program Upgrade
Troubleshooting
Product Specifications
…………………………………………………………... 01~03
………………………………………………………………….. 04
………………………………………………………………………….. 05
…………………………………………………………….. 06
.......................................................................... 07
……………………………………………………………………… 08
………………………………………………………… 09
……………………………………………. 10
………………………………………………………………. 11~12
.................................................................. 13~14
…………………………………….. 15
……………………………………………………………... 16~19
………………………………………………………... 20~23
…………………………………………………………. 24~31
……………………………………… 32~35
………………………………………………………… 36~40
……………………………………………………. 41~43
…………………………………………………………………………. 44~52
………………………………………………………….. 53~57
……………………………………………………………. 58~59
……………………………………………………. 60~62
KAISHOT
Contents 6
KAISHOT Introduction
KAISHOT is a portable Micro Audio/Video Recorder (mobile Personal Video
Recorder) which is used to record and store video and audio information, provide
locational information, and transmit such information to control tower through
wireless network, thus allowing real-time, on-site monitoring of the field operations.
[KAISHOT Features] KAISHOT is a digital audio/video portable product for recording and real time transmission with high resolution (H.264) and smaller size. Its main use is for security, military, police, sports and other various activities. KAISHOT is a system that can store, review, and transmit the meta data all at once. KAISHOT is designed to be protected from water, vibration, or any external shocks. Accessories such as belt clip, wire, and pin can be used for more convenient attachment of the product to the user.
KAISHOT
Components 7
KAISHOT Series Introduction
Series Features
IDF-PVR01 Series
*Camera Connector Connected with Hybrid camera or Bullet camera
* Hybrid Camera can use Wireless
Communication Module/GPS/Camera together. Option Item : Wireless Communication Module and GPS
IDF-PVR02 Series Camera Connector Connected with external equipment such as Bullet camera and GPS module Communication Module Connector Can connect with Wireless Communication Module * Option for each
Camera
Connector
Camera
Connector
Communication
Module
Connector
KAISHOT
Components 8
Components
Camera (Optional)
Recorder camera ※Camera(optional): Hybrid or Bullet Camera(1.5m Turn Core)
User Manual Battery Pack
Micro SD Card CD (Manual/Software) Micro SD Card Reader
AC adapter/Power Cord (1.5m cable)
AV Cable (1.5m Turn Core)
USB data transfer Cable (1.5m Turn Core(optional))
KAISHOT
The Name of Each Part 9
The Name of Each Part
[Kaishot] [Hybrid Camera]
Camera Connector
2.4” Color TFT LCD
UP/RIGHT
ENTER
LEDDOWN/LEFT
Internal MIC
POWER
MENU
REC
Belt Clip Speaker
Hand Strap Connector
Battery Lock
DC IN
RESETA/V OUT
Micro SD Card SlotUSB (Program Update)
Cover Lock
Tripod Socket
Battery Pack
Wireless Module (WiFi, HSDPA, GPRS, Wibro)
GPS Module
Camera
Lens Cover
KAISHOT
Connecting/Disconnecting Camera 10
Connecting/Disconnecting Camera
Cover Lock Cover Lock
[Connecting] Line up the arrow as the picture above and push the cable down. It will lock automatically and will secure the connection.
[Disconnecting] Hold the connector’s lock position and pull it up to unlock the connection. Camera will be separated from the recorder.
KAISHOT
Use of Battery 11
Use of Battery
[Battery Mounting]
[Battery Removal]
Lever Lever
Lever Lever
Align the battery with the power connector, and load the battery as shown on the figure.
Push the battery up, and then slide the Lock to the left to engage the lock as shown.
Slide the Lock to the right to release the lock, and pull the battery down a little as shown.
Lift the battery to separate it from the body component.
KAISHOT
Use of Battery 12
[Charging the Battery]
[Battery Operation Time]
Small Cap. (2,100mAh) Large Cap. (2,100mAh)
Continuous Recording 1hour 40 minutes 3 hours
Continuous
Transmission 1hour 10-20 minutes 2 hours 30-40 minutes
[Notes on Battery] ▪ The figures above are measured in the laboratory setting under the actual conditions.
The actual figures in the use of different conditions may vary. ▪ The battery is a consumable. Duration of operation of battery will decrease over time. ▪ When the duration of operation of battery is reduced to half from the first time of use, it is required to replace with a new battery. (The warranty period of a new battery is six months after its purchase.) ▪ The battery is discharged even if you do not use it.
Status LED Color
Recording / Transmission Blue
Receiving Messages Blink Red
Charging Solid Red
Charging Complete Green
Small Cap. (2,100mAh)
Large Cap. (4,200mAh)
Time 4~5 hours 7~8 hours
LED Lamp
(LED Lamp Indication)
(Charging Time) - When system is turned off
Connect AC Adapter to the KAISHOT and insert power cord to the power outlet. When battery is fully charged, there will be green light lit on LED indicator.
KAISHOT
Micro SD Card Management 13
Micro SD Card Management ※ Caution : You must turn OFF the power before you insert or remove the Micro SD Card, or the stored information may be damaged or lost. If you have to remove the Micro SD Card when the power is ON, you should remove the SD Card through the Main Menu. (SEE the following page for related instruction.)
Slide the side lock to the left and open the side cover as shown.
Slide the side lock to the left and open the slide cover as shown
[Inserting SD Card] [Removing SD Card]
Push the SD Card into the slot until you hear click
Slightly push the SD Card in until it clicks, then the SD Card will eject out of the slot
Close the cover. Close the cover.
KAISHOT
Micro SD Card Management 14
[Managing the SD Card through Main Menu]
Press the MENU button in the Main Menu for 2-3 seconds.
* You can also remove the SD Card while recording,
transferring, or playing the data through this method.
* If you want to delete the file separately: - Refer to "Playback" for deleting recording files - Refer to "Messages" for deleting messages.
Use "◀◀ " or "▶▶ " to select the function you want to perform, then press ENTER.
Press "SD Card Information" to check the SD Card information.
Note: You will return to the Main Menu if you press MENU button again shortly. If you press ENTER once you finish the final function, it will return to the previous screen you were running.
Press "Format SD Card" to format the SD Card.
Press "Remove SD Card" to remove the SD Card while power is on. SD Card must be completely removed out of the unit and re-inserted again to be recognized its data in the card.
KAISHOT
Outputting Video to the External Monitor 15
Outputting Video to the External Monitor
You can play the files recorded by KAISHOT on TV or other external monitors.
▬▶
Turn off the power supply before connecting the recorder to the external devices. Open the side cover and connect the supplied AV cable with external monitor's AV cable. (Caution: It may not work properly if you use a cable from different source.)
KAISHOT
Kaishot Preview 16
KAISHOT Preview
[Main Menu]
[Function Buttons]
- Power ON/OFF
MENU - Press short: move to the previous or next menu - Press long (2-3 seconds): move back to the Main Menu
REC -Press long (2-3 seconds): start recording -Also functions to stop recording, real-time transmission, and playback.
ENTER
- Operates selected functions. - Press short while recording or playback: moves to check messages (does not stop recording or playback)
- Press long (2-3 seconds) while recording or playback: pauses recording or playback, or resumes recording or playback.
- Press short while checking messages: moves back to the previous menu
▶▶ - Fast-forward or move to the right
◀◀ - Rewind or move to the left
Refer to page 17 ("Description of Icons on Upper-Right Corner of the Screen")
Transfer
Messages
Setup
Time Setting (dd-mm-yyyy AM/PM)
REC
Play
GPS
※ Please be advised that each function button performs differently in different use.
KAISHOT
Kaishot Preview 17
[Description of Icons on Upper-Right Corner of the Screen]
New message or image file is received
There is no message or image file, or no file is received
Wireless module such as WiFi is connected
Wireless module such as WiFi is NOT connected
Wireless module such as WiFi is turned OFF
GPS is connected
GPS is NOT connected
GPS is not activated (GPS OFF)
SD card is inserted
SD card is NOT inserted
Battery Charge Level Indication ( )
KAISHOT
Kaishot Preview 18
[KAISHOT Main Function]
Function How to Use
Power
“ ” Press long (2-3 seconds) to turn power ON/OFF
Recording
▪ Recording will start when you select REC icon and press ENTER button. ▪ Recording is possible, except when data is being transmitted real-time, by pressing REC button for 2-3 seconds. ▪ Recording will end when you press REC button while recording. ▪ Always check the camera connection, Micro SD Card memory status,
and remaining battery life before recording.
Playback ▪ You can see the list of recorded files by selecting Play icon. Select the file you want to play then press ENTER button. ▪ Playback will end when you press REC for 2-3 seconds while playing.
Transmission
▪ Real-time transmission will start when you select Transfer icon and press ENTER button.
▪ You can record when “Select REC” is “REC on”. ▪ Transmission will end when you press REC button. ▪ Check the connection of camera/wireless module/ remaining battery life.▪ Data is NOT being recorded when file is being transmitted. ▪ You can watch real-time video through KAISHOT Viewer
Messages
▪ You can check the list of received messages in the Main Menu by pressing Message icon, and select the message you want to check then press ENTER button.
▪ You can check the message while recording, playback, or transmission if you press ENTER button.
▪ Wireless module has to be connected to check the messages. ▪ You can send messages through KAISHOT Viewer.
KAISHOT
Kaishot Preview 19
Functions How to Use
GPS
▪ Select GPS icon and press ENTER button to change your GPS settings. ▪ Check GPS module. ▪ GPS information is used to set up time, store GPS data while recording, and transmit GPS information while real-time transmission.
Setup
▪ Select Setup in the Main Menu and press ENTER button to change or set up the property value. ▪ Record Mode You can check and change the value about Recording Functions. ▪ Transmission Mode You can check and change the value about Real-time video transmission and WiFi that are related to wireless module. You can check and change REC set up mode during transmission and set up value for REC during transmission. ▪ GPS Setup You can check and view about GPS Functions. ▪ Tools Setup You can check and change various setup values such as LCD Saving Mode / Languages / LCD Brightness.
* When system is in Lock mode, the only button that can be used is to Unlock the system.
KAISHOT
Recording Functions 20
Recording Functions
▪ Recording Functions Details ► Icon Information in the Screen during Recording ► Starting and Stopping a Recording ► Pausing, and Restarting a Recording after Pausing ► Locking and Unlocking a Recording Function ► Checking Messages
▪ You may not be able to perform Recording when: ► Camera is not connected ► Different between applied camera mode and video format (TV System is different). ► Micro SD Card is not inserted or has insufficient memory capacity left ► Remaining battery life is insufficient ► Side cover is opened
▪ Recording may stop automatically when: ► One file has reached it maximum recording capacity, or any of the situation above (You
may not be able to perform a recording function) occurs. ► When Micro SD Card is not handled in accordance with the User Manual, Micro SD
card, data or information stored in Micro SD card may be damaged or lost. ▪ Values changed in the Setup will affect the properties of recordings. ▪ Recording will continue while checking the messages.
KAISHOT
Recording Functions 21
[Icon Information in the Screen during Recording]
Recording mode (Pause indicated by )
Recorded file name yymmddhhmmsss.MP4
Message Status
Remaining Micro SD Card capacity(Number indicates how much memory left)
GPS Status
Wireless Module On
Unlock mode indicated by
Remaining Battery
Current time (day month date h:m:s year) GPS Information (Lat. Lon.Vel.)
KAISHOT
Recording Functions 22
[Starting and Stopping a Recording]
Starting a Recording
▪ Select REC icon in the Main Menu and press ENTER button to start recording. ▪ Recording is possible, except when data is being transmitted real-time, by pressing
REC for 2-3 seconds
▪ Once recording starts, icon will appear.
Stopping a Recording
▪ Press REC button for 2-3 seconds to stop recording.
How to Start a Recording
Select REC icon and press ENTER.
KAISHOT
Recording Functions 23
[Pausing, and Restarting a Recording after Pausing]
Pausing while Recording
▪ Press ENTER button for 2-3 seconds to pause recording.
(You can check the text message by pressing "ENTER" button shortly.)
▪ Icon will change to
Restarting after Pausing
▪ Press ENTER button for 2-3 seconds while pausing a recording to restart a recording.
▪ Icon will change to
[Locking and Unlocking a Recording Function]
Locking while Recording
▪ Press MENU button for 2-3 seconds, then Lock feature will be activated.
▪ Lock icon will changes to
▪ Except for pressing MENU again for 2-3 seconds to deactivate lock feature, no buttons can function as usual.
Unlocking
▪ Press MENU button for 2-3 seconds to unlock.
▪ Lock icon will change to
▪ All buttons will function as usual.
KAISHOT
Playback Functions 24
Playback Functions
▪ Playback Functions Details ► Icon Information in the Screen during Playback ► Starting and Stopping a Playback ► Pause / Restart / Return to the Start of the Playback / Fast-forward and Rewind ► Adjusting OSD, Audio Volume, LCD Brightness ► Micro SD Card Management while Playback ► Checking Messages while Playback(Please refer “Checking Messages”)
▪ You may not be able to perform a Playback function when: ► Micro SD Card is not inserted or not recognized. ► Remaining battery life is insufficient.
▪ Playback may stop automatically when: ► Any of the situation above (You may not be able to perform a Playback function) occurs.
KAISHOT
Playback Functions 25
[Icon Information in the Screen during Playback]
Playback
Time file is being played
File name (yymmddhhmmss.MP4)
Message Status
Micro SD Card Capacity(Number indicates the memory cap.) Wireless
Module
GPS Status
Remaining Battery
Recorded time(day month date h:m:s year)
GPS Information (Lat. Lon.Vel.)
Total recording time
KAISHOT
Playback Functions 26
[Starting and Stopping a Playback]
Starting a Playback
▪ You can check the list of files recorded when you press “Play” button. Select the file you want to watch and press ENTER to start playback.
▪ The icon will change to
Stopping a Playback
▪ Press REC button for 2-3 seconds to stop playback.
Playback Screen
Time when recording has started (yymmddhhmmss)
Available Micro SD Card memory
Time setting (dd-mm-yy AM/PM )
KAISHOT
Playback Functions 27
[Pause / Restart/ Return to the Start of the Playback / Fast-forward and Rewind]
Pause while Playback Mode
▪ Press ENTER button for 2-3 seconds to pause playback.
(You can check the text message by pressing "ENTER" button shortly.)
▪ Icon will change to
Playback after pause
▪ Press ENTER button for 2-3 seconds while pause mode to restart playback.
▪ Icon will change to
Return to the Start of the Playback
▪ Press ◀◀ button for 2-3 seconds to return to the beginning of the file and play again.
Rewinding
▪ Press ◀◀ button shortly (less than 2 seconds) to rewind the file.
▪ Press ◀◀ again shortly (less than 2 seconds) to resume playback at a normal speed.
Fast-forwarding while Playback
▪ Press ▶▶ button shortly (less than 2 seconds) to fast forward the file.
▪ Press ▶▶ again shortly (less than 2 seconds) to resume playback at a normal speed.
KAISHOT
Playback Functions 28
[Adjusting OSD, Audio Volume, LCD Brightness]
▪ If you press MENU button 2-3 seconds while playback, Popup Menu appears.
▪ If you press MENU button shortly (less than 2 seconds), the Menu will disappear.
Changing OSD Status
▪ Select OSD Display and ENTER button. Use arrow to select Yes or No.
▪ OSD Display will not appear once you Select No.
KAISHOT
Playback Functions 29
Adjusting Audio Volume while Playback
▪ Select desired Audio volume and press ENTER button. Adjust volume with ◀◀ or ▶▶
button.
Adjusting LCD Brightness while Playback
▪ Select desired LCD Brightness and press ENTER button. Adjust the brightness with
◀◀ or ▶▶ button.
KAISHOT
Playback Functions 30
[Micro SD Card Management in the Recording File Menu]
▪ Press MENU button in the Play List for 2-3 seconds. Popup Menu will appear.
▪ Popup Menu will disappear when you press MENU button again, without changing any
values.
Removing SD Card / SD Card Information / SD Card Format
▪ Refer to Micro SD Card Management
Playback from the File List
▪ Choose the file you want to play and select Play icon, then press ENTER button to start
playback.
KAISHOT
Playback Functions 31
Deleting File / Directory from the File List
▪ Choose the file or directory you want to delete and press MENU button for 2-3 seconds.
Select DELETE, and then press ENTER button to delete.
KAISHOT
Transmission(Real-time) Functions 32
Transmission Functions (Real-time Streaming)
▪ Transmission Functions Details ► Icon information in the Main Screen While Real-time Transmission ► Starting and Stopping Real-time Transmission ► Locking and Unlocking while Real-time Transmission ► Checking Messages while Real-time Transmission
▪ You may not be able to transmit the video when: ► Camera is not connected ► Wireless module is not connected, or signal is weak ► Remaining battery life is insufficient
▪ Real-time transmission may stop automatically when: ► Any of the situation above (You may not be able to transmit the video) occurs, except
the case when the signal is weak.
▪ You can record during transmission ►You can record when “Select REC” is setting “REC on” ►Although there is error pop up menu during transmission and REC seems to be stopped,
transmission is still on process. (Please refer to Recording Functions if there is REC error.)
►Setting Value of environmental communication function can affect recording file during transmission.
▪ Values changed in the Setup will affect the properties of transmission, as well as the
condition of transmission. ▪ Transmission will continue while checking the messages. ▪ You can watch the real-time transmitted video via KAISHOT Viewer.
For the information regarding KAISHOT Viewer, please refer to the KAISHOT Viewer Manual.
KAISHOT
Transmission(Real-time) Functions 33
[Icon information in the Main Screen while Real-time Transmission]
Wireless module status
Lock Status
Remaining battery
* When wireless module status icon shows weak signals, real-time transmission may not work properly.
Micro SD Card Capacity(Number indicates the memory cap.)
Recording mode
It is displayed only
when recording in
transmission.
KAISHOT
Transmission(Real-time) Functions 34
[Starting and Stopping Real-time Transmission]
Starting a Real-time Transmission
▪ Select “Transfer” icon in the Main Menu and press ENTER button to start transmission.
▪ When Server IP of Transfer Setup is inputted, KAISHOT can transmit Image(Client) to
Server IP . When you want to connect with KAISHOT to get Video file directly, you
should set initial field of IP or last field of IP with “0”.
ex) Server IP : 192.168.1.25 -> 0.0.0.0 or 0.168.1.25 or 192.168.1.0
Stopping a Real-time Transmission
▪ Press REC button for 2-3 seconds to end transmission.
Real-time Transmission Main Menu
Environmental factors may affect the amount of time it takes for wireless module to be connected. When the connection is made, message box will disappear.
KAISHOT
Transmission(Real-time) Functions 35
[Locking and Unlocking while Real-time Transmission]
Locking while Real-time Transmission
▪ Press MENU button for 2-3 seconds while transmission to activate Lock function.
▪ Lock Icon will change from to
▪ Except pressing MENU button for 2-3 seconds to deactivate Lock function, no buttons
will function normally.
Unlocking
▪ Press MENU button for 2-3 seconds to Unlock.
▪ Lock icon will change from to
▪ All buttons function normally.
KAISHOT
Checking Messages 36
Messages
▪ Message Functions Details ► Checking Messages
(Please refer “Trouble Shooting” for possible problems while checking messages.) ► Using Zoom Function while Checking Image Messages ► Micro SD Card Management while Checking Messages
▪ You may not be able to check messages when: ► Micro SD Card is not inserted, or is not recognized. ► Remaining battery life is insufficient.
▪ Checking messages may terminate automatically when: ► Any of the situation above (You may not able to check messages) occurs, message
checking will terminate automatically. ▪ You can send messages via KAISHOT Viewer.
▪ Values changed in the Setup will affect the message checking function.
KAISHOT
Checking Messages 37
[Checking Messages]
Checking Messages
▪ You can check the list of messages in the Main Menu by selecting Message icon, and
press ENTER button to check the message you selected.
▪ If there is not messages, you will see the blank screen in the Message menu.
Currently available SD Card Memory Capacity
Current time (dd-mm-yy am/pm h:m)
KAISHOT
Checking Messages 38
▪ You can check messages by pressing ENTER button while recording, playback, or real-
time transmission. Functions will normally continue while checking messages.
▪ While Checking messages, press ◀◀ to check previous message, ▶▶ to check next
message.
Receiving a New Message while Checking Messages
▪ During any operations, any new message received will appear on the screen.
Terminating Message Checking
▪ You can return to the Message Menu if you press MENU button shortly (less than 2
seconds) while checking messages. If you press MENU button again in the Message
Menu, function that was being performed previously will resume.
Currently available SD Card Current time
Total number of message
Current message
KAISHOT
Checking Messages 39
[Zooming In a Message]
▪ Menu screen will appear if you press MENU button for 2-3 seconds while checking
message.(Previously performed function will resume if you press MENU button shortly
(less than 2 seconds)
▪ If you press MENU button in the Menu screen without changing any settings, Popup
Menu will disappear.
▪ Zoom function only supports image files.
Image Zoom Setup while Checking Messages
▪ Select applicable enlargement, then press ENTER button.
▪ Example of 2 times enlargement. Use ENTER button to move up/down, or right/left.
Use ◀◀ or ▶▶ to move right or left.
X 2
ENTER
Use ◀◀ or ▶▶ to move up or down.
KAISHOT
Checking Messages 40
[Managing Micro SD Card in the Messages Menu]
▪ Popup Menu will appear when you press MENU for 2-3 seconds in the Message List.
▪ If you press MENU button in the Popup Menu without changing any settings, Popup
Menu screen will disappear.
SD Card Removal / SD Card Information / SD Card Format
▪ Please refer to Micro SD Card Management.
Deleting Messages in the Message List
▪ Choose the files you want to delete, select DELETE icon, then press ENTER button to
delete the selected files.
▪ Please refer to Deleting Recording Files.
KAISHOT
GPS settings Functions 41
GPS Setup
▪ GPS Setup Functions Details ► GPS Setup ► Checking GPS Information ► GPS Setup and Checking Messages while Checking GPS Information
▪ GSP Information is used for Recording and Transmission. If GPS is not connected properly or OFF, or if it is impossible to receive information to it, default GPS value will be used.
▪ You can check the GPS connectivity information via GPS icon. When GPS is not
connected, it will NOT show any error messages.
▪ Although GPS is properly connected, you may not be able to receive GPS information if you stay indoors.
▪ Select GPS icon in the Main Menu and press ENTER button to check and change the
GPS setup. ▪ You will be able to return to the Main Menu, or Setup screen, if you press MENU
button shortly (less than 2 seconds).
KAISHOT
GPS settings Functions 42
[GPS Setup]
▪ Select the value you want to change by using ◀◀ or ▶▶ , and press ENTER
button.
▪ You will return to the previous screen by pressing MENU button shortly (less than 2
seconds).
GPS Power : On/Off
Resume : Restart GPS.
Speed : Km/h , mph
Time zone : -12:00 ~ +12:00 (Time changes automatically, according
to the location of the unit.)
KAISHOT
GPS settings Functions 43
[Checking GPS Information]
▪ Check GPS information by pressing GPS icon.
▪ Press MENU button shortly (less than 2 seconds) to return to the Main Menu.
The number of satellite, (Lat. Lon.Vel)
KAISHOT
Setup 44
Setup
▪ Setup Details ► Record Setup ► Stream Setup ► GPS Setup (Refer to GPS Setup Function ) ► Tools Setup
▪ Select Setup in the Main Menu and press ENTER button to set up the value of each
functions.. ▪ Press MENU button shortly (less than 2 seconds) to go back to the Main Menu.
▪ Setup Menu
Record Setup Stream Setup Tools Setup
► Resolution ► Video Quality ► Frame Rate ► Select Mic ► Record Mode ► Backup Time ► Time Stamp
► Resolution ► Video Quality ► Frame Rate ► Select Mic ► Transfer Mode ► IP server Setup ► Network Setup ► Select REC ► Backup Time for REC ► Time Stamp for REC
► Display Brightness ► Audio Volume ► Saving Mode ► Video Format ► Micro SD Card ► Message Alarm ► Language ► Time Setup ► Version Information
KAISHOT
Setup 45
[Record Setup]
▪ Select REC Setup in the Setup menu and press ENTER button.
▪ Press MENU button shortly (less than 2 seconds) to return to the Main Menu.
REC Setup Details
▪ Determines the resolution of video
file. Value changes according to the format of video you choose to use.
▪ Video quality setup.
▪ Set up the Frame Rate while recording. Value range may differ according to the video format.
ENTER ENTER
NTSC Video Format PAL Video Format
NTSC Video Format PAL Video Format
KAISHOT
Setup 46
REC Setup Details
▪ Select a mic to use for recording.
▪ You can choose to record audio and video, or audio only.
▪ When set up as “0 min”, Per one hour recording separately. (except for abnormal situations)
▪ When “Backup Time Setup” is completed, recording starting time folder is created when record starts, and will be recorded in the new file at the time in the folder.
▪ If selecting “Yes”, storing the recording time on the OSD while recording, and the recording time is shown at the display below on the OSD while playback.
KAISHOT
Setup 47
[Stream Setup]
▪ Select Stream Setup in the Setup, and press ENTER.
▪ Press MENU" button shortly (less than 2 seconds) to return to the previous menu.
Stream Setup Details
▪ Resolution setup. Value range may differ according to the video format.
▪ Setup the video quality for real-
time transmission.
▪ Set up the Frame Rate while real-time transmission. Value range may differ according to the video format.
ENTER ENTER
NTSC video Format PAL Video Format
NTSC video Format PAL Video Format
KAISHOT
Setup 48
Stream Setup Details
▪ Select a mic to be used for real-time streaming.
▪ It can be setup in order to transmit
Voice and Image or Image. It applies the same as recording during transmission.
▪ This is where you set up
KAISHOT’s server IP. It is essential that KAISHOT exists within NAT or HSDPA mobile network and KAISHOT Viewer exists in the outside network.
▪ After changing the WiFi settings, you
must turn the WiFi OFF , then ON to
apply the new settings ▪ In case set up as Ad-hoc (Managed /
Ad-hoc), KAISHOT runs by AP(Access Point).
▪ Encrypt: Off / WEP / SD Card Set up the wireless communication code. In case of SD Card, reading the channel of WEP, security setup key, SSID from the SD Card and then make setup.
▪ Security Setup : 64/128 (Bit) Applicable at the encrypt WEP
▪ Key: Applicable at the encrypt WEP. In case of security setup 64, 5 letters, in case of 128 ,13 letters to be setup.
▪ SSID: Setup the applicable SSID.
: change Menu : change value : select category : change value
◀◀ / ▶▶
ENTER
REC MENU ◀◀ / ▶▶ ENTER
: move to prev. : move to next : change value : setup
KAISHOT
Setup 49
Use Ad-hoc Mode (Use as AP Mode)
▪ - Set up the AP name of the product (SSID). ※ Caution
Be sure that the surrounding wireless network environment does not have the same SSID setup.
▪ Select the network type, choose Ad-hoc mode using ENTER button. ▪ Select WiFi Power, set it on OFF for 10 seconds using ENTER button, and turn it back
ON again.
Update the Network settings by using SD Card
▪ Popup menu will appear when you press MENU for 2-3 seconds in the stream setup List. ▪ If you press Menu button in the Popup menu without changing any settings, Popup
menu screen will disappear. ▪ After selecting the Update WiFi Settings and press "ENTER". ▪ Must have WiFi-setting.ini file inside the SD card. This file can be created through KAISHOT.
Exanple for WiFi_setting.ini ========================== IP Address=192.168.0.17 GateWay=192.168.0.1 Subnet Mask=255.255.255.0 DNS=192.168.0.1 Network Type=Ad-hoc Wiress mode=802.11.b/g mix SSID=IDFONE Key=abcde Security=64 Encrypt=WEP Channel=1 ==========================
KAISHOT
Setup 50
Stream Setup Details
▪ It can record during transmission
when “Select REC” is “REC on”.
▪ It is for set up back up time for REC during transmission.
▪ When set up as “0 min”, Per one hour recording separately. (except for abnormal situations)
▪ When “Backup Time Setup” is completed, recording starting time folder is created when record starts, and will be recorded in the new file at the time in the folder.
▪ It is for set up REC time stamp
during transmission. ▪ If selecting “Yes”, storing the
recording time on the OSD while recording, and the recording time is shown at the display below on the OSD while playback.
KAISHOT
Setup 51
[Tools Setup]
▪ Select Tools Setup in the Setup menu, and press ENTER button.
▪ It will return to the Setup menu when you press MENU button shortly (less than 2
seconds).
Tools Setup Details
LCD Brightness. 1 to 10 Use "◀◀" or "▶▶" to adjust the brightness, then
press ,"ENTER"
Audio Volume, 1 to 10. Use "◀◀" or "▶▶" to adjust the volume, then press ,"ENTER"
Screen will automatically turn off if no entry is made while setup mode is on. In this case, all other features will function normally. ※Caution
If LCD Saving mode is not activated, it may reduce battery life.
KAISHOT
Setup 52
Tools Setup Details
Decide video input/output format
Refer to Micro SD Card Management
Choose the method of how you want to be indicated when message is received. It will continue to alarm until the message is being checked.
This product supports operation in English, Korean, Chinese, and Japanese.
Time Setup cannot be conducted while GPS is received. Time Setup can be conducted while GPS is not being received.
Software version information.
KAISHOT
Program Upgrade 53
Program Update
◆ Bootloader, Kernel, Ramdisk Update
no Bootloader, Kernel , Ramdisk Update process
1
Connect KAISHOT to PC USB port with USB cable. *If KAISHOT battery capacity is not enough then use adapter. If during upgrade time KAISHOT power off then big problem for update.
2
KAISHOT power on before press ‘▶▶’ button + ’REC’ button.
Check LCD window
Message. USB DOWNLOAD MODE
3
Run sdnw.exe. First time connect KAISHOT then install driver at PC. Driver file name is “gserial.inf”
USB DOWNLOAD MODE
KAISHOT
Program Upgrade 54
no Bootloader, Kernel , Ramdisk Update process
4
Left window message display port number “COM7” then connection is completed. If port number is “PORT ####” then connection is problem. That time KAISHOT power restart and restart first step.
5
Use “Select file button” and select update file for Bootloader, kernel, Ramdisk(RootFs). After then press “OK” button
Filename for update
Kernel : zImage*
Root : Ramdisk.gz
Bootloader : xloader5_h3.bin
KAISHOT
Program Upgrade 55
no Bootloader, Kernel, Ramdisk Update process
6
Bootloader Download Check Bootloader icon And press download button then download processing starting
Kernel Download Check Kernel icon And press download button then download processing starting.
Ramdisk(RootFS) Download Check RootFS icon And press download button then download processing starting
Window status
Download item select
Downloading
Download completed
KAISHOT
Program Upgrade 56
no Bootloader, Kernel , Ramdisk Update process
7
Bootloader, Kernel, Ramdisk update done then press close button for SDNW software finishing. KAISHOT power off. (If KAISHOT power switch not run then remove USB cable or use KAISHOT RESET switch )
KAISHOT
Program Upgrade 57
◆ Application Update
no Program Update process
1
Copy all the files in the SDCARD folder to the SD Card provided. * You may encounter problems after the update if you modify or delete any of the item in the folder.
SDCARD Folder
2
Insert the SD Card that contains the updated version information of KAISHOT that you wish to install, and turn the system on. Program update message will appear.
3
Once the message appears, select OK and press ENTER button. Update will be conducted automatically. Once update is done, system will turn of automatically. * check the version information at: Setup -> Tools Setup -> Version Information
KAISHOT
Troubleshooting 58
Troubleshooting (Pop-up window will disappear when you press ENTER)
Error Messages Possible causes and solutions
This message will appear when there is not enough space remained in Micro SD card. ▶ Change your Micro SD card accordingly. ▶ Please use after deleting the files on playback list or
message list.
This message will appear in the beginning of recording or while recording/ playback if the Micro SD card is not inserted. ▶ Insert your Micro SD card, or change the card
accordingly.
This message shows when removal of Micro SD card is failure. ▶ Please check if SD card is inserted correctly. ▶Please KAISHOT power on again in case
It shows when file can not play on the playback list or the file is damaged. Also it can show when the file is not supported on message list.
The camera is not properly connected to the recorder. ▶ Ensure the camera is connected to the recorder securely
and connect the camera properly.
It shows when between applied video mode and camera
mode are different during REC or Transmission, or when
removal of SD card is failure.
▶ Please check if applied camera mode and video
format are same.
▶ Please check if SD card is inserted correctly.
This message appears when the side cover is open in the beginning of recording or while recording. ▶ Recording will terminate if the cover opens while
recording. (Data may not be recorded)
KAISHOT
Troubleshooting 59
Error Messages Possible causes and solutions
The battery is almost empty. ▶ The system will automatically turn off after terminating all
functions. ▶ Replace the battery or recharge the battery.
As SD card network setting file, it shows when there is no
file during update.
▶ Please use after copy wifi_setting.int file in SD card..
This file can be created through KAISHOT.
This message appears when wireless setup has incorrect value, or WiFi signal is weak. This may occur when WiFi is connected or removed while power is on. ▶ Please use after WiFi connecting
▶ Move to the nearest Mesh or AP. ▶ Reset the wireless setup value if Mesh or AP are located
close. ▶ Turn WiFi off and then turn it on again.
※ Call for the service if the same trouble appears after following the Troubleshooting.
KAISHOT
Product Specifications 60
Product Specifications
[KAISHOT]
Technical Specifications
CPU ARM920T
Mic Input Internal 1 Ch , External 1 Ch
Internal Speaker Output Power : 1W
External I/O InterfaceUSB 1.1 : 1port
AV out : 1ea [Φ3.5 AV Jack (RCA)]
LCD 2.4 “ color TFT-LCD (QVGA)
Micro SD Card/Button Provided 1GB / 6 buttons
Power supply DC 3.7V(using battery)
AC 5.0V(using AC Adapter)
Power Consumption
Standby (GPS, WiFi, Camera:off) : 1.65W
Playback (GPS:on, WiFi:off) : 2.4W
Recording (GPS:on, WiFi:off) : 3.7W
Real-time transmission (GPS:on, WiFi:on) : 6W
AC Adapter AC 100~240V, 50~60Hz
DC 5V, 2A
Battery Pack
Li-Polymer, DC 3.7V
2,100mAh : 63(H)x80(V)x10(w)
4,200mAh : 63(H)x80(V)x17(w)
Dimension 63mm(W) X 110mm(D) X 28mm(H)
Operational Temp. -10℃ ~ 60℃
Material Used Polycarbonate
Water Resistance IP 65
Weight 169.5g (2,100mAh Battery)
213.0g (4,200mAh Battery)
※ Product information and specification subject to change without notice.
KAISHOT
Product Specifications 61
[Hybrid Camera: Standard Camera]
Technical Specifications
TV system NTSC / PAL
Image Sensor 1/4" CCD
Lens and View Angle 3.6mm(standard) F2.0 / 68° , lens exchangeable
Scanning system 525 Lines, 60 fields/sec / 625 Lines, 50 fields/sec
Min. Illumination 0.5 Lux, F1.2, 5600 °K
※※Wireless Module WiFi(802.11 b/g) , HSDPA, WiBro
※※GPS Module SiRF star 3(Built In)
Dimension 105mm(W) X 30mm(D) X 100mm(H) (WiFi included)
Operational Temp. -20℃ ~ 50℃
Material Used Polycarbonate
Water Resistance IP 65
Weight 129g
※Product information and specification subject to change without notice.
: Optional
KAISHOT
Product Specifications 62
[Functional Specifications]
Functional Specifications
OS Embedded OS (Linux)
Video Input (Camera) 1Ch, NTSC/PAL(Selectable)
Video Output 1Ch, NTSC/PAL(Selectable)
Resolution NTSC: [720 X 480] [640 X 480] [320 X 240] (W X H)
PAL: : [720 X 576] [352 X 288] (W X H)
Video Quality High[1.5Mbps], Standard[1Mbps], Low[700Kbps]
Frame Rate
Recording NTSC 30/25/15 fps
PAL 25/15/5 fps
Transmission NTSC 30/25/20/15/10/5/3/2/1 fps
PAL 25/15/5/3/1 fps
Recording Mode [Video + Audio] [Video]
Real-time Protocol RTSP/RTP/RTCP
Codec H.264(Video), AAC(Audio)
File Format mp4
Message Format Text/bmp/jpg/gif Format
bmp/jpg/gif Image zoom (x1 , x2, x2.5)
Storage Medium Micro SD Card (support up to 8GB)
Recording time Continuous recording: 3hours Micro SD Card 1GB recording time: 1 hour 10 mins (720 X 480 / 30fps base)
One-push recording Start recording by REC button
Playback speed Playback : [x1] [x4] / Rewind : [x4]
LCD Brightness Dark ←→ Bright, 10 steps
LSD Saving Mode [off] [10 s] [20 s] [30 s] [1 m] [3 m] [5 m]
Language support [Korean][English][Chinese][Japanese]
※Product information and specification subject to change without notice.
Thank you
Questions and Warranty inquiry Give us a call if you have any questions or before visiting our service center.
Customer Service Center 02-2109-6490
Please be sure to use battery charger, battery and peripherals recommended by manufacturer to prevent damage or breakage to the KAISHOT.
Warranty period: Battery charger (1 year), Battery (6 months)
Any damage caused by the use of imitation product is liable to the user’s responsibility.