硬體儀錶迴路 instrument loops
DESCRIPTION
硬體儀錶迴路 Instrument Loops. 傳送器. 現場接線箱 (Junction Box). Marshaling. Yokogawa 錯線盤. I/O 卡片與控制站. 操作台. Panel. & Computer. ooo. 控制機能. 操作機能. DCS. Open Loop ( 半迴路 ). Overall Loop ( 全迴路 ). YOKOGAWA Supply Scope. 控制室. 現場. V net. V net - PowerPoint PPT PresentationTRANSCRIPT
YOKOGAWA
傳送器
現場
Open Loop ( 半迴路 )
控制室
現場接線箱 (Junction Box)
Overall Loop ( 全迴路 )
MarshalingPanel
Yokogawa錯線盤
I/O 卡片與控制站
ooo
操作台
& Computer
DCS控制機能 操作機能
YOKOGAWA Supply Scope
硬體儀錶迴路 Instrument Loops
YOKOGAWA
System Bus for RIO
V netV net
– Media : Coaxial Cable or Optical Fiber
– Protocol : IEEE 802.4
– Access Control : Token Passing
– Trans. Speed : 10 Mbps
Transmission path :10BASE5 -compliant 50 ohm coaxial cableConnector :BNC Coaxial connectorConnection :Bus type, multi-drop connectionRedundancy :YESTransmission distance:500m (Max. 20km in using optical cable)
Ethernet
RIO bus
‧Remote I/O bus• Communication : Cyclic Scan Trans.
• Trans. Speed : 2 Mbps
• Trans. Distance : 20Km max..
• Node : 8 nodes
YOKOGAWA
系統組態 System Configuration
Ethernet
V-net
ooo
LFCS
ooo
HIS HIS
+EngFunction
控制台
Small FCS
ooo
Remote I/O
FF-H1
KFCS
Large FCS
HIS : Human Interface Station V-Net : CS3000 Control Bus CGW : Communication Gateway Unit BCV : Bus Converter
SFCS : Compact Field Control Station LFCS : Standard Field Control Station for RIO KFCS : Standard Field Control Station for FIO RFCS2 : Migration Type Field Control Station
I/O 卡片及控制站
YOKOGAWA
CS 1000 CS3000
Number of tags 8000 100,000
Max. Windows 1000 2500
Graphic windows Displayed Process Data 200 Data per Window 400 Data per Window
Modifiers 8 Data per Object 8 Data per Object
100 Data per Window 200 Data per window
Trend windows Number of pens 8 Pen per Window
Data Axis 1,2,5,10
Time Axis 1/4,1/2,1,2,4,8
Scan Period 1sec.,10sec.,1min.,2min.,5min.,10min.
Recording Time 48min.,8hours,2days,4days,10days,20days
Control Windows No. of Instrument Faceplate 16 per Window
Trend
Turning Trend Acquisition Cycle 1 sec.
Reserve Function:16 points 16 points
Trend function No. of points acquired 1,10 sec. Scan period: Max. 256 points(2 block)
1024 point, 8 block 2560 point, 20 block
(Including one/ten-second (Including one/ten-second
trend acquisition points) trend acquisition points)
Other station Acquisition Max. 1024 point, 8 block Max. 6400 points, 50 block
控制站運算效能說明
YOKOGAWA
操作視窗 (2)
Navigator Window
Overview Window
Control Group Window
以滑鼠點選呼叫視窗
YOKOGAWA
操作視窗 (3)
操作畫面視窗
趨勢圖視窗
單點趨勢圖
YOKOGAWA
参 . 視窗模式
全螢幕 (未來操作設定 )全螢幕 ( 未來操作設定 )
軟體視窗模式 軟體視窗模式
( 即為一般電腦的操作模式 )
YOKOGAWA
視窗大小的差異
YOKOGAWA
Operation window: System Message
System Message Area (1)
Main Panel area
System alarms ( 系統 Alarm)
Operator guides ( 操作人員指引 - 需預先設定指示內容 )
Security ( 操作人員登入 - 使用者設定權限不同,可進行不同權限的設定修改 )
Windows calls (Main Panel Area 的主要項目 )
Operation menu ( 前一頁、後一頁… )
Preset menu ( 預設的圖面、 Control Group 、捷徑… )
時間、日期
Icons (CS3000 軟體開啟項目 )
Latest 5 alarms( 最近 Alarm 的五個變數項目,可直接點選操作 Tuning 視窗 )
Process alarms ( 製程監測變數 Alarm)
YOKOGAWA
Operation window: System Message
System Message Area (2)
Main Panel area
Navigator ( 控制圖面管理視窗 )
Name entry ( 輸入名稱呼叫控制畫面、 Tag 控制面板、 Control Group)
Toggle HIS/NT ( 與 Window 應用程式視窗切換 )
Clear screen ( 清除 CS3000 目前顯示的視窗 )
Buzzer reset ( 警報聲音 Reset)
Hard copy ( 螢幕內容列印 )
Icons
Latest 5 alarms
YOKOGAWA
Operation window: Navigator
按這裡呼叫畫面
全部的控制圖列表
用滑鼠點兩下就可以把圖形叫出來了
全部的 Control Group 列表
全部的 Trend 圖列表
YOKOGAWA
Operation window: Graphic
呼叫方式:
1. 按螢幕中 Name 的項目輸入控制圖名稱“ GRP-C10”
2. 可以從 Overview 點選 ( 說明在下一頁 )
3. 從 Navigator 視窗 (上一頁的說明 )
按一下,然後在小視窗裡直接輸入圖形名稱。 ( 第一種呼叫方式 )
YOKOGAWA
Operation window: Overview
最快的呼叫方式是在下拉選單的項目中點選
按一下就可進入選取的圖面
YOKOGAWA
Operation window: Control Group
手動輸入 Control Group
呼叫方式:
1. 按螢幕中 Name 的項目輸入控制圖名稱“ GRP025” 。
2. 從 Navigator 視窗呼叫。
YOKOGAWA
Operation window: Trend (1)如何呼叫 Trend 畫面
步驟一在畫面出現的變數上對需要操作的變數以滑鼠點兩下,就會出現該變數的控制面板。
步驟二以下拉式選單選取 Tuning 項目。
YOKOGAWA
Operation window: Trend (2)如何呼叫 Trend 畫面
步驟三出現 Trend 畫面。
YOKOGAWA
Operation window: Tuning (1)
原始訊號讀入數值
控制迴路圖
操作掛牌 (Ex. 禁止操作、維修中… )
手動設定 PV 值 (Calibration Mode)
關閉警報功能 (AOF)
趨勢圖記錄及顯示設定
Acknowledge
螢幕列印
YOKOGAWA
Operation window: 操作面板 (3)
Alarm Status 控制面板製程變數顯示顏色沒有Alarm的狀態 綠色 (Green)
通訊狀態錯誤 灰色 (Gray)CAL模式 (手動輸入PV模式) 藍綠色 (Cyan)HI、HH、LO、LL 紅色 (Red)±DV、±DEL 黃色 (Yellow)
Display Color Of the Process Variable Bar for controller block
週邊設備、公用設備
一般重要
YOKOGAWA
Operation window: 操作面板 (5)
顏色 製程狀態 Alarm 狀態的一些例子藍色 Alarm關閉 AOF
紅色 Alarm發生 (第一類) LO、HI、IOP、LL、HH、OOP
黃色 Alarm發生 (第二類) ±DV、VEL、MLO、MHI
綠色 正常 NR
白色 沒有設定Alarm狀態的製程變數 -
灰色 通訊狀態故障 -
Tag Mark Display Colors and Alarm Status
YOKOGAWA
Operation window: Process Alarm
點選
這一頁就是製程操作目前的 Alarm List 。
Acknowledge
這一個按鈕是警報聲 Reset 。
YOKOGAWA
Operation window: System Alarm ( 系統警報 )
點選
這一部份警報是針對控制器、控制台、網路通訊等硬體設施的狀態。