industrial carbide saw & tool corporationcreated date: 5/31/2013 11:32:32 am

2

Terms & Conditions

SALES TERMS: Prices are subject to change without notice. Orders are accepted on the basis of prices in effect on the date of order, unless specifically stated otherwise by Popular Machinery & Tools, Inc.SHIPPING: Shipping costs and a nominal handling charge will be added to all orders. All shipments are made from San Antonio, Texas; Santa Fe Springs, California; or High Point, North Carolina via UPS Ground Service unless other arrangements are requested. Any claim for shortage or damage must be made within �0 days of the invoice date.RETURNS: Prior authorization must be obtained before the return of any merchandise. Popular Tools will accept the return for credit of unused, unmodi-fied, and undamaged merchandise, in the original package, within 90 days of the invoice date. Any saw blade that has been rebored, reground, etched or inscribed by the customer or at their request cannot be accepted for return.WARRANTY: Popular Tools makes only the highest quality product. Saws with defects in materials or workmanship will be replaced. Damage to saws due to customer misuse is not covered by this warranty. The warranty is void once a blade has been reground or has had the face polished to remove the Popular Tool logo. REBORING: Any saw blade can be bored to fit your exact specifications. The reboring fee depends on size, pinholes, and keyways. Please call for exact pricing on this service. A blade that has been rebored cannot be returned for credit or a replacement.

TYPE OF SAW PREFIX CODE PAGE

22” - 30” Saws GA 20

Additional Items Various 24-26

Blind Cutting Saws NM, LTL, KC �3

Chop Saws & Radial Arm Saws RA & RATH �4

Combination Saws CR 6

Conic Scoring Saws SC 5

Dado Sets/ Additional Chippers DA & CFP �7

Door Jamb Saws PTZ �3

Double Cut Off Saws DC �8

Edge Banders EB & VORW 6

Finger Joint Cutters FJ �8

General Purpose Saws GA & GT 7-�0

Glue Joint Rip Saws GJ, GJM, GJRM �2

Groovers GV �7

Hardiplank® Polycrystalline Diamond Series PRD, PCD �8

Lucas Saws LUCAS 20

Melamine Saws LM �6

Mitre & Double Mitre Saws MD, MDC, MS �3

Multi-Score Split Saws RSMS �2

Non-Ferrous Cutting Saws NF 2�-22

Panel Saws PS 3-4

Plastic Cutting Saws PP �8

Precision Trim Saws PT �0

Professional Series PR & IQ �7

Rip & Gang Saws RF, RS, RSM ��-�2

Solid Surface Saws SF �6

Split Scoring Saws SS 5

Stabilizers STAB �6

Steel Cutting Saws ST 8

Thin Rim Saws TM �5

Thin Saws TH �5

Thin Saws for Moulding ML �4

Tree Trimming Saws JARF �4

Trim Saws TS �0

Truss & Component Saws TR �9

Ultra Thin Saws UT �5

Table of Contents

3

Panel SawsDesigned for use on panel machines for cutting MDF, particle board, laminates, and bonded materials. All panel saws are made with SuperMicro-Sheen C-�� sub-micron carbide for longer life. Machine applications listed are only a guideline. All panel saws have a �0 degree hook angle.

DIAMETER mm TEETH BORE & PINHOLE mm KERF mm PLATE mm DESIGN ORDER ID PRICE FOR USE ON

300 60T 30, 2/7/42 + 2/�0/60 4.4 3.2 TCG PS3003060T �66.00 Mayer, Scheer

300 72T 75 4.4 3.2 TCG PS3007572T �70.00 Giben, Homag

300 60T80, 2/9/�00 + 2/7/��0 +

2/�4/��04.4 3.2 TCG PS3008060T �66.00 SCM, Mayer

300 72T 30, 2/7/42 + 2/�0/60 3.2 2.2 ATB GAM3003072 99.00 Altendorf, Scheer

300 96T 30, 2/7/42 + 2/�0/60 3.2 2.2 ATB GAM3003096 ��3.00 Altendorf, Scheer

320 72T 50, 3/�2.5/80 4.4 3.2 TCG PS3205072T �73.00 Giben

350 54T 30, 2/�0/60 4.4 3.2 ATB PS3503054A �59.00 Schelling, Various

350 54T 30, 2/�0/60 4.4 3.2 TCG PS3503054T �64.00 Schelling, Various

350 54T 75 4.4 3.2 ATB PS3507554A �59.00 Giben, Homag

350 72T 30, 2/�0/60 4.4 3.2 ATB PS3503072A �70.00 Schelling, Holzher

350 72T 30, 2/�0/60 4.4 3.2 TCG PS3503072T �77.00 Schelling, Holzher

350 72T � �/4” 4.4 3.2 TCG PS350Q72T �77.00 SCM

350 72T 50, 4/�2.5/80 4.4 3.2 TCG PS3505072T �9�.00 Giben

350 72T 60, 2/�4/�00 4.4 3.2 TCG PS3506072T �77.00 Holzma

350 72T 75 4.4 3.2 TCG PS3507572T �82.00 Giben, Homag

350 72T80, 4/9/�00 + 2/7/��0 +

2/�4/��04.4 3.2 TCG PS3508072T �77.00

SCM, GabbianiGabbiani

370 72T 30, 2/�0/60 4.4 3.2 TCG PS3703072T 2�7.00 Schelling

380 60T 60, 2/�4/�00 4.4 3.2 TCG PS3806060T 2�4.00 Holzma

380 72T 30, 2/�4/�00 4.4 3.2 TCG PS3803072T 225.00 Schelling

380 72T 60, 2/�4/�00 4.4 3.2 TCG PS3806072T 2�7.00 Holzma

380 72T 60, 2/�4/�00 4.8 3.5 TCG PS3806072TB 235.00 Holzma

400 60T 75, 4/�5/�05 4.4 3.2 TCG PS4007560T 2�9.00 Giben, Homag

400 60T 80, 2/9/�30 + 4/�9/�20 4.4 3.2 TCG PS4008060T 230.00 Selco

400 72T 30 4.4 3.2 TCG PS4003072T 226.00 Schelling, Various

400 72T 60, 2/��/��5 4.4 3.2 TCG PS4006072T 226.00 Holzma

400 72T80, 4/9/�00 + 2/7/��0 +

2/�4/��04.4 3.2 TCG PS4008072T 226.00 Gabbiani

420 72T 60, 2/��/��5 4.8 3.4 TCG PS4206072T 265.00 Holzma

430 60T 75, 4/�5/�05 4.8 3.5 TCG PS4307560T 265.00 Giben

430 72T 75, 4/�5/�05 4.8 3.5 TCG PS4307572T 265.00 Giben

430 72T 80, 2/9/�30 + 4/�9/�20 4.4 3.2 ATB PS4308072A 239.00 Selco

430 72T 80, 2/9/�30 + 4/�9/�20 4.4 3.2 TCG PS4308072T 239.00 Selco

450 72T 30 4.4 3.2 TCG PS4503072T 265.00 Schelling

450 72T 60, 2/�4/�25 4.8 3.5 TCG PS4506072T 277.00 Holzma

450 72T 80, 2/9/�30 + 4/9/�20 4.4 3.2 ATB PS4508072A 239.00 Selco, Gabbiani

450 72T 80, 2/9/�30 + 4/9/�20 4.4 3.2 TCG PS4508072T 239.00 Selco, Gabbiani

460 72T 30 4.4 3.2 TCG PS4603072T 255.00 Holzma

470 72T 75, 4/�5/�05 4.4 3.2 TCG PS4707572T 26�.00 Giben



480 72T 80, 2/9/�30 + 4/�9/�20 4.8 3.5 TCG PS4808072T 255.00 Selco

4

Panel Saws (cont.)Designed for use on panel machines for cutting MDF, particle board, laminates, and bonded materials. All panel saws are made with SuperMicro-Sheen C-�� sub-micron carbide for longer life. Machine applications listed are only a guideline. All panel saws have a �0 degree hook angle.

Using Main Blade & Matching Scoring Blade

To solve the problem of a material chipping at the bottom is best done with a main blade and a scoring blade, held in precise alignment to each other and turning in opposite directions. The lower surface is scored, cut by the smaller scoring blade ahead of the larger main blade that completes the cut. The outer surface of the material has already been cut and cannot chip.

With each sharpening, the main blade becomes shorter and narrower. The scoring blades must cut a kerf of the same width as the main blade kerf. (Scoring blade is re-sharpened only on the face to maintain the constant kerf.)

Consequently, the scoring saw kerf has to be altered. The conic scoring saw, when first put in use, cuts a deeper groove to match the wide main blade. As the main saw becomes narrower, the scoring saw must cut shallower (nar-rower) to match the main saw.

Most often, the main and scoring saws are as a set and kept together for their entire useful lives.

For split scoring saws, the need to match the kerf to that of a main saw remains the same, though the mechanics are different. Spacers (shims) are added to make it as wide as the new main saw. As the main saw becomes narrower with the repeated sharpening, spacers are removed from the scoring saw to keep it at the width of the main saw.

DIAMETER mm TEETH BORE & PINHOLE mm KERF mm PLATE mm DESIGN ORDER ID PRICE FOR USE ON

500 60T 30 4.4 3.2 TCG PS5003060T 299.00 Schelling, Mayer

500 72T 60, 2/��/��5 + 2/�9/�20 5.0 3.5 TCG PS5006072T 308.00 Holzma

500 72T 75, 2/��/��5 + 2/�9/�20 5.0 3.5 TCG PS5007572T 308.00 Giben

500 72T 80, 2/9/��0 5.0 3.5 TCG PS5008072T 295.00 Gabbiani

520 60T 60, 2/��/��5 + 2/�9/�20 4.8 3.5 TCG PS5206060T 290.00 Holzma


540 60T 60, 2/��/��5 + 2/�9/�20 5.0 3.5 TCG PS5406060T 328.00 Holzma

540 84T 60, 2/��/��5 + 2/�9/�20 5.0 3.5 TCG PS5406084T 365.00 Holzma

550 72T �00 5.0 3.5 TCG PS550�072TG 339.00 Giben

570 60T 60, 2/�9/�20 5.0 3.5 TCG PS5706060T 345.00 Holzma

600 60T 60, 2/��/��5 + 2/�9/�20 5.8 4.0 TCG PS6006060T 462.00 Holzma

600 72T 60, 2/��/��5 + 2/�9/�20 5.8 4.0 TCG PS6006072T 495.00 Holzma

670 60T 40, �/��/�40 6.2 4.2 TCG PS6704060T 572.00 Schelling

670 60T 60, 2/��/�48 + 2/�9/�20 6.2 4.2 TCG PS6706060T 572.00 Holzma

5

Split Scoring SawsSplit design allows adjustment to match kerf of main blade simply by adding shims. All split saws are made with SuperMicro-Sheen C-�� sub-micron carbide for longer life. All split scoring saws have �0 degree hook angle. The new SSRP�2050 is for fully adjustable scoring.

DIAMETER mm TEETH BORE mm KERF mm PLATE mm DESIGN ORDER ID PRICE USE ON:

�00 2x�2 3/4” 2.8-3.6 2.0 Split , FTG SS�00Q �3�.00 SCM

�00 2x�2 20 2.8-3.6 2.0 Split, FTG SS�0020 �3�.00 SCM, Shelling

�00 2x�2 22 2.8-3.6 2.0 Split , FTG SS�0022 �3�.00 Altendorf, Martin

�20 2x�2 3/4” 2.8-3.6 2.0 Split, FTG SS�20Q �3�.00 SCM

�20 2x�2 20 2.8-3.6 2.0 Split , FTG SS�2020 �3�.00 SCM

�20 2x�2 22 2.8-3.6 2.0 Split, FTG SS�2022 �3�.00 Altendorf

�20 2x�2 30 �.9mm 2.0 Split, FTG SSEZ�2030 �37.00 EZ Dial

�20 2x�2 50 2.8-3.6 2.0 Split, FTG SSRP�2050 �3�.00 Altendorf

DIAMETER mm TEETH BORE mm KERF mm PLATE mm DESIGN ORDER ID PRICE USE ON:

�20 24T 20 3.2-4.2 2.2 RA SC�202024T 92.00 various

�20 24T 20 4.4-5.4 3.0 RA SC�202024F 95.00 various

�25 24T 20 4.4-5.4 3.0 RA SC�252024 97.00 Schelling

�25 24T 45 4.4-5.4 3.0 RA SC�254524 ��5.00 Giben, Homag

�50 24T 30 4.4-5.2 3.0 RA SC�503024T �26.00 Mayer

�50 24T � �/4” 4.4-5.4 3.0 RA SC�50Q24 �26.00 SCM

�50 24T 45 4.4-5.4 3.0 RA SC�504524 �26.00 Homag

�60 36T 45, 3/��/70 4.4-5.4 3.0 RA SC�604536 �58.00 Giben, Homag

�60 36T 55, 3/7/66 4.4-5.4 3.0 RA SC�605536 �50.00 Gabbiani

�75 28T 45, 2/��/��5 4.4-5.4 3.0 RA SC�754528 �50.00 Holzma

�80 30T 45 4.4-5.4 3.0 RA SC�804530F �6�.00 Holzma, Homag

�80 30T 50, 3/�2.5/80 4.4-5.4 3.0 RA SC�80503044 �57.00 Giben

�80 34T 20, 2/7/42+2/�0/60 4.4-5.4 3.0 RA SC�802034 �62.00 Schelling, Mayer

�80 34T 30, 2/7/42+2/�0/60 4.4-5.4 3.0 RA SC�803034 �62.00 various

�80 36T 45 4.8-5.8 3.0 RA SC�804536H �62.00 Holzma

�80 36T 50, 3/�3/80 4.4-5.4 3.0 RA SC�805036 �69.00 Giben

�80 36T 55 5.0-6.0 3.0 RA SC�805536G �6�.00 Giben

200 34T 20 4.4-5.4 3.0 RA SC2002034F �50.00 Schelling

200 34T 20, 2/��/��5 5.0-6.0 3.0 RA SC2002034S �57.00 Schelling

200 34T 45, 2/��/��5 4.4-5.4 3.0 RA SC2004534T �50.00 Holzma

200 34T 45, 2/��/��5 4.8-5.8 3.0 RA SC2004534E �50.00 Holzma

200 34T 45, 2/��/��5 5.0-6.0 3.0 RA SC2004534J �57.00 Holzma

200 34T 45, 2/��/��5 5.8-6.8 3.0 RA SC2004534S �66.00 Holzma

200 34T 65, 2/9/��0+2/9/�00 4.4-5.2 3.0 RA SC2006534 �50.00 Selco

200 36T 20 6.2-7.2 3.4 RA SC2002062 �79.00 Schelling

200 36T 45 5.8-6.8 3.0 RA SC2004536H �66.00 Holzma

200 36T 45 6.2-7.2 3.4 RA SC2004562 �79.00 Holzma, Homag

200 36T 65, 2/9/��0+2/9/�00 4.8-5.8 3.0 RA SC2006536 �66.00 Selco

200 36T 80, 2/�4/��0 4.4-5.4 3.0 RA SC2008036 �66.00 SCM, Gabbiani

2�5 42T 50, 3/�5/80 4.8-5.8 3.0 RA SC2�55042 �88.00 Giben

Conic Scoring SawsConic tooth shape allows adjustment to match the kerf of main blade simply by adjusting the height of scoring blade. All are made with SuperMicro-Sheen C-�� sub-micron carbide for longer life; �0 degree hook for all conic scoring saws.

6

Combination SawsCombination saws are designed for all around use, when acceptable rips and crosscuts must be made with one saw blade. The larger gullets allow deeper cuts and efficient saw dust escape on rip cuts. We sell more combination saws than other categories of saws simply because it’s unique design.

Edge BandersFor trimming plastic protecting edge bandings of solid wood, wood veneers and plastic. For use on single and double side edge banding machines.

DIAMETER TEETH DESIGN KERF PLATE BORE HOOK ORDER ID PRICE

7” 40T ATB+R .�26” .087” 5/8” �5 CR740 69.00

8” 40T ATB+R .�26” .087” 5/8” �5 CR840 80.00

9” 40T ATB+R .�26” .087” 5/8” �5 CR940 80.00

�0” 40T ATB+R .�26” .087” 5/8” �5 CR�040 77.00

�0” 50T ATB+R .�26” .087” 5/8” �5 CR�050 77.00

�2” 50T ATB+R .�34” .094” �” �5 CR�250 �26.00

�2” 60T ATB+R .�34” .094” �” �5 CR�260 �35.00

�4” 60T ATB+R .�60” .��0” �” �5 CR�460 �55.00

�4” 70T ATB+R .�60” .��0” �” �5 CR�470 �73.00

�6” 60T ATB+R .�65” .��8” �” �5 CR�660 �79.00

�6” 80T ATB+R .�65” .��8” �” �5 CR�680 200.00


�00mm 20T ATB 3.0mm 2.0mm 20mm 5 EB�0020A 49.00

�00mm 20T Left 3.0mm 2.0mm 20mm 5 EB�002020L 49.00

�00mm 20T Right 3.0mm 2.0mm 20mm 5 EB�002020R 49.00




��0mm 20T ATB 3.6mm 2.6mm 22mm 5 EB��02220A 49.00


�25mm 40T Left 3.2mm 2.2mm 20mm 5 EB�252040L 6�.00

�25mm 40T Right 3.2mm 2.2mm 20mm 5 EB�252040R 6�.00








�00mm 24T Left 3.6mm 2.2mm �” �5 VORW�0024L* �04.00

�00mm 24T Right 3.6mm 2.2mm �” �5 VORW�0024R* �04.00

*VORW�0024L & VORW�0024R are for the Vorwood Door Trimming

7

General Purpose Saws - Alternate TopThese saws are designed for general sizing and cutting of natural woods. A higher number of teeth provides a finer edge to the cut, but should be used only on thinner material. The saw blades designated by the prefix GAM contain Micro-Sheen C-4 sub-micron carbide, which provides longer tool life. The blades designated by the prefix GAL have laser cuts in the body to help reduce noise.


7 �/4” 24T ATB .��0” .079” 5/8” 20 RS72524 66.00

7 �/4” 40T ATB .��0” .079” 5/8” �0 GA72540 73.00

7 �/4” 60T ATB .��0” .079” 5/8” �0 GA72560 82.00

8” 40T ATB .��8” .079” 5/8” �0 GA840 73.00

8” 60T ATB .��8” .079” 5/8” �0 GA860 90.00

9” 40T ATB .�26” .087” 5/8” �0 GA940 82.00

9” 60T ATB .�26” .087” 5/8” �0 GA960 90.00

250mm 60T ATB 3.2mm 2.2mm 30mm, 2/7/42 �0 GAM2503060 68.00

250mm 80T ATB 3.2mm 2.2mm 30mm, 2/7/42 �0 GAM2503080 83.00

�0” 40T ATB .�26” .087” 5/8” �0 GA�040 6�.00

�0” 40T ATB .�26” .087” 5/8” �0 GAL�040 74.00

�0” 60T ATB .�26” .087” 5/8” �0 GA�060 62.00

�0” 60T ATB .�26” .087” 5/8” �0 GAL�060 76.00

�0” 60T ATB .�26” .087” 5/8” �0 GAM�060 76.00

�0” 80T ATB .�26” .087” 5/8” �0 GA�080 79.00

�0” 80T ATB .�26” .087” 5/8” �0 GAL�080 90.00

�0” 80T ATB .�26” .087” 5/8” �0 GAM�080 90.00

�0” �00T ATB .�26” .087” 5/8” �0 GA�0�0 �50.00

300mm 72T ATB 3.2mm 2.2mm 30mm, 2+2PH �0 GAM3003072 99.00

300mm 96T ATB 3.2mm 2.2mm 30mm, 2+2PH �0 GAM3003096 ��3.00

�2” 36T ATB .�26” .087” �” 20 RS�236 97.00

�2” 48T ATB .�34” .094” �” �0 GA�248 90.00

�2” 60T ATB .�34” .094” �” �0 GA�260 83.00

�2” 80T ATB .�34” .094” 5/8” �0 GA�280P �0�.00

�2” 80T ATB .�34” .094” �” �0 GA�280 �0�.00

�2” 80T ATB .�34” .094” �” �0 GAL�280 �06.00

�2” 80T ATB .�65” .��8” �” �0 GA�280CW �7�.00

�2” �00T ATB .�26” .087” �” �0 TS�2�0 �35.00

350mm 72T ATB 3.5mm 2.5mm 30mm, 2+2PH �0 GAM3503072 �47.00

350mm 96T ATB 3.2mm 2.5mm 30mm, 2+2PH �0 GAM3503096 �62.00

�4” 40T ATB .�84” .�34” �” 0 GA�440 �95.00

�4” 60T ATB .�57” .��8” �” �0 GA�460 �38.00

�4” 60T ATB .�57” .��8” �” �0 GAL�460 �42.00

�4” 80T ATB .�57” .��8” �” �0 GA�480 �59.00

�4” 80T ATB .�57” .��8” �” �0 GAL�480 �62.00

�4” �00T ATB .�57” .��8” �” �0 GA�4�0 �79.00

�4” �20T ATB .�65” .��8” �” �0 GA�4�2 208.00

400mm 60T ATB 3.5mm 2.5mm 30mm �5 GA4003060 �42.00

400mm �20T ATB 4.6mm 3.4mm 30mm �0 GA40030�2 208.00

�6” 40T ATB .�85” .�34” �” �0 GA�640 �9�.00

�6” 54T ATB .�65” .�26” �” �0 GA�654HD �79.00

�6” 60T ATB .�65” .�26” �” �0 GA�660 �82.00

8

Steel Cutting SawsThese steel cutting saws use micro-grain tips with titanium to provide greater impact strength and durability. Can cut through ferrous metal such as angle iron, steel pipe, flat bar, and rebar. Please note maximum RPM varies.

General Purpose Saws - Alternate Top (cont.) These saws are designed for general sizing and cutting of natural woods. A higher number of teeth provides a finer edge to the cut, but should be used only on thinner material. The saw blades designated by the prefix GAM contain Micro-Sheen C-4 sub-micron carbide, which provides longer tool life. The blades designated by the prefix GAL have laser cuts in the body to help reduce noise.

*These 500mm, 520mm, and 600mm are for the Grecon and Paul optimizing up cut saws.**This blade is for Triad Open Stringer Saw General Purpose Saws– TCG (triple chip) on next page.


�6” 80T ATB .�65” .�26” �” �0 GA�680 �9�.00

�6” �00T ATB .�65” .�26” �” �0 GA�6�0 2�4.00

�8” 40T ATB .�80” .�34” �” �0 GA�840 208.00

�8” 60T ATB .�80” .�34” �” �0 GA�860 230.00

�8” 80T ATB .�80” .�34” �” �0 GA�880 253.00

�8” �00T ATB .�80” .�34” �” �0 GA�8�0 286.00

�8” �20T ATB .�80” .�34” �” �0 GA�8�2 32�.00

�8” �40T ATB .�80” .�34” �” �0 GA�8�4 368.00

�9” �40T ATB .�80” .�34” �” �0 GA�9�40 460.00

500mm 96T ATB 5.0mm 3.5mm 70mm, 6/8/220 �0 GA5007096* 396.00

500mm �20T ATB 5.0mm 3.5mm 30mm, 2/�5/63 �0 GA50030�2* 400.00

500mm �20T ATB 5.0mm 3.5mm 70mm, 6/8/220 �0 GA50070�2* 396.00

500mm �44T ATB 5.0mm 3.5mm 30mm, 2/�5/63 �0 GA50030�44* 407.00

500mm �44T ATB 4.8mm 3.6mm 35mm, 2/�5/63 5 GA50035�44* 407.00

20” 40T ATB .�94” .�34” �” �0 GA2040 260.00

20” 60T ATB .�80” .�34” �” �0 GA2060 285.00

20” 80T ATB .�80” .�34” �” �0 GA2080 3�4.00

20” �00T ATB .�80” .�34” �” �0 GA20�0 334.00

20” �20T ATB .�80” .�34” �” �0 GA20�2 36�.00

520mm �44T ATB 5.0mm 3.5mm 30mm, 2/�5/63 �0 GA52030�44* 4�8.00

600mm �44T ATB 5.0mm 3.5mm 30mm, 2/�5/63 �0 GA60030�44* 594.00

24” 40T ATB .245” .�65” �” 5 GA2440 429.00

26” 80T ATB .245” .�65” �” 5 GA2680A 629.00

26” �00T ATB .245” .�65” �” 5 GA26�0A 649.00

26” �20T ATB .245” .�65” �” 5 GA26�2 7�5.00

28” 80T ATB .245” .�65” �” 5 GA2880 649.00

30” 80T ATB .260” .200” � �/4” �0 TRIAD3080** 940.00

DIAMETER TEETH DESIGN KERF PLATE BORE HOOK Max. RPM ORDER ID PRICE

7-�/4” 48T ST .087” .07�” 5/8” 0 3,500 ST748K 8�.00

8” 50T ST .087” .07�” 5/8” 0 3,000 ST850K 88.00

�0’ 50T ST .094” .07�” 5/8’ 0 2,800 ST�050 �35.00

�2” 60T ST .094” .079” �” 0 �,800 ST�260K �58.00

�2” 80T ST .094” .079” �” 0 �,800 ST�280K �8�.00

�4” 72T ST .094” .079” �” 0 �,700 ST�472K �8�.00

�4” 90T ST .094” .079” �” 0 �,700 ST�490K 203.00

9

General Purpose Saws - Triple Chip These saws are designed for high production cutting of natural woods, plywood, chipboard, and MDF. The TCG teeth offer less wear than the ATB with nearly the same quality of cut. Blades designated by the prefix GTM contain Micro-Sheen C-4 sub-micron carbide, which provides for a longer tool life. The blades designated by the prefix GTL have laser cuts in the body to help reduce noise.


7 �/4” 40T TCG .��0” .079” 5/8” �0 GT740 73.00

7 �/4” 60T TCG .��0” .079” 5/8” �0 GT760 85.00

8” 40T TCG .��8” .079” 5/8” �0 GT840 76.00

8” 60T TCG .��8” .079” 5/8” �0 GT860 95.00

220mm 64T TCG 3.2mm 2.2mm 30mm, 2/7/42 �0 GTM22064 99.00



�0” 40T TCG .�26” .087” 5/8” �0 GT�040 6�.00

�0” 40T TCG .�26” .087” 5/8” �0 GTM�040 74.00

�0” 60T TCG .�26” .087” 5/8” �0 GT�060 62.00

�0” 60T TCG .�26” .087” 5/8” �0 GTL�060 76.00

�0” 60T TCG .�26” .087” 5/8” �0 GTM�060 76.00

�0” 80T TCG .�26” .087” 5/8” �0 GT�080 79.00

�0” 80T TCG .�26” .087” 5/8” �0 GTL�080 90.00

�0” 80T TCG .�26” .087” 5/8” �0 GTM�080 90.00

�0” 80T TCG .�26” .087” 5/8” -5 LM�080TCG �06.00

�0” �00T TCG .�26” .087” 5/8” �0 GT�0�0 �50.00

300mm 72T TCG 3.2mm 2.2mm 30mm, 2+2 PH �0 GTM3003072 �02.00

300mm 96T TCG 3.2mm 2.2mm 30mm, 2+2 PH �0 GTM3003096 ��3.00

�2” 48T TCG .�34” .094” �” �0 GT�248 92.00

�2” 60T TCG .�34” .094” �” �0 GT�260 83.00

�2” 72T TCG .�34” .094” �” �0 GTM�272 ��3.00

�2” 80T TCG .�34” .094” �” �0 GT�280 �03.00

�2” 80T TCG .�34” .094” �” �0 GTM�280 �26.00

�2” 96T TCG .�42” .�02” �” �0 GTM�296 �47.00

350mm 54T TCG 3.5mm 2.4mm 30mm �0 GTM3503054 �04.00



�4” 54T TCG .�38” .094” �” �0 GTM�454 ��7.00

�4” 60T TCG .�57” .��8” �” �0 GT�460 �46.00

�4” 80T TCG .�57” .��8” �” �0 GT�480 �64.00

�4” �00T TCG .�57” .��8” �” �0 GT�4�0 �9�.00

�6” 60T TCG .�65” .�26” �” �0 GT�660 �84.00

�6” 80T TCG .�65” .�26” �” �0 GT�680 2�0.00

�6” �00T TCG .�65” .�26” �” �0 GT�6�0 244.00

�6” �00T TCG .�65” .�26” �” -5 GTM�6�0* 263.00

�6” �20T TCG .�65” .�26” �” �0 GT�6�2 244.00

�6” �20T TCG .�65” .�26” �” -5 GTM�6�2* 265.00

�8” 40T TCG .�80” .�34” �” �0 GT�840 233.00

�0

General Purpose Saws - Triple Chip (cont.) These saws are designed for high production cutting of natural woods, plywood, chipboard, and MDF. The TCG teeth offer less wear than the ATB with nearly the same quality of cut. Blades designated by the prefix GTM contain Micro-Sheen C-4 sub-micron carbide, which provides for a longer tool life. The blades designated by the prefix GTL have laser cuts in the body to help reduce noise.

Trim SawsThe trim saw blades are designed with a higher number of teeth to keep a fine cut on the finish side of your material.

Precision Trim SawsThe precision trim saw has teeth which are beveled on the face and the top. This improvement on the standard ATB design gives an extra fine cutting edge. The raker tooth cleans away any stray saw dust so the teeth cut with perfect smoothness. This is the smoothest cutting blade you will find! Add stabilizers to get real fine cuts.

*With their negative hook design and with the use of Micro-Sheen sub-micron tips, the GTM�6�0, GTM�6�2, GTM�8�0, and GTM�8�2 are excellent for cutting counter tops.


�8” 60T TCG .�80” .�34” �” �0 GT�860 255.00

�8” 80T TCG .�80” .�34” �” �0 GT�880 277.00

�8” �00T TCG .�80” .�34” �” �0 GT�8�0 3�3.00

�8” �00T TCG .�80” .�34” �” -5 GTM�8�0* 3��.00

�8” �20T TCG .�80” .�34” �” �0 GT�8�2 3�8.00

�8” �20T TCG .�80” .�34” �” -5 GTM�8�2* 323.00

20” 60T TCG .�80” .�34” �” �0 GT2060 307.00

20” 80T TCG .�80” .�34” �” �0 GT2080 3�4.00

20” �00T TCG .�80” .�34” �” �0 GT20�0 352.00

20” �20T TCG .�80” .�34” �” �0 GT20�2 370.00


9” 72T ATB .��8” .079” 5/8” �0 TS972 94.00

�2” �00T ATB .�26” .087” �” �0 TS�2�0 �35.00

�4” 80T ATB .�26” .087” �” �0 TS�480 �46.00

�4” �00T ATB .�26” .087” �” �0 TS�4�0�26 �73.00

�4” �00T ATB .�38” .094” �” �0 TS�4�0�38 200.00

�4” �20T ATB .�26” .087” �” �0 TS�4�2 �82.00

�5” �00T ATB .�38” .094” �” �0 TS�5�0 �98.00

�6” 80T ATB .�38” .094” �” �0 TS�680 �68.00

�6” �00T ATB .�38” .094” �” �0 TS�6�0 207.00

�6” �20T ATB .�38” .094” �” �0 TS�6�2 2�4.00

�8” 80T ATB .�57” .��8” �” �0 TS�880 2�2.00

�8” �00T ATB .�57” .��8” �” �0 TS�8�0 230.00

�8” �20T ATB .�57” .��8” �” �0 TS�8�2 253.00

DIAMETER TEETH DESIGN KERF PLATE BORE HOOK FACE BEVEL ORDER ID PRICE

�0” 80T LRLRS .�26” .087” 5/8” �0 �0 PT�080 �22.00

�0” �00T LRLRS .��8” .087” 5/8” �0 �0 PT�0�0 �59.00

�2” �00T LRLRS .�26” .087” �” �0 �0 PT�2�0 �68.00

�2” �20T LRLRS .��8” .087” 5/8” �0 �0 PT�2�2P �82.00

�2” �20T LRLRS .��8” .087” �” �0 �0 PT�2�2 �82.00

�4” �00T LRLRS .�26” .095” �” �0 �0 PT�4�0 �82.00

�4” �20T LRLRS .�26” .095” �” �0 �0 PT�4�2 �86.00

�6” �20T LRLRS .�57” .��8” �” �0 5 PT�6�2�57 228.00

�8” �00T LRLRS .�57” .��8” �” �0 5 PT�8�0 208.00

�8” �20T LRLRS .�57” .��8” �” �0 5 PT�8�2 263.00

��

Rip & Gang Saws - FTG / TCGThese saws are designed for ripping soft or hard woods where chiseling action of FTG is effective. FTG grind is the fastest, most efficient tooth design for ripping; 20 degree hook angle for all Rip Saws.

DIAMETER TEETH DESIGN KERF PLATE BORE ORDER ID PRICE

8” 24T FTG .��8” .087” 5/8” RF824 68.00

9” 24T FTG .�26” .087” 5/8” RF924 70.00

�0” �0T FTG .�45” .�02” 5/8” RF�0� 56.00

�0” 24T FTG .�26” .087” 5/8” RF�024�26 6�.00

�0” 24T FTG .�45” .�02” 5/8” RF�024�45 74.00

�0” 24T FTG .�26” .087” 70mm, 2 key* RF�024K 68.00

�0” 30T FTG .�60” .��8” 5/8” RF�030 99.00

�0” 40T FTG .�26” .087” 5/8” RF�040 83.00

�0” 40T TCG .�26” .087” 3”** RSLH�0403 90.00

�0” 40T TCG .�26” .087” 4 3/�6”** RSLH�0404 90.00

300mm 28T FTG 3.4mm 2.2mm 80mm, 2 key**** RFRM30028 �07.00

�2” 24T FTG .�26” .087” �” RF�224�26 79.00

�2” 24T FTG .�34” .094” �” RF�224�34 86.00

�2” 24T FTG .�60” .��0” �” RF�224�60 92.00

�2” 24T FTG .�85” .�26” �” RF�224�85 95.00

�2” 24T FTG .�26” .087” 70mm, 2 key* RF�224K 79.00

�2” 24T FTG .�60” .��0” 70mm, 2 key* RF�224K�60 95.00

�2” 30T FTG .�34” .094” �” RF�230 �05.00

�2” 30T FTG .�65” .��8” �” RF�230�60 �2�.00

�2” 30T FTG .�65” .��8” 70mm, 2 key* RF�230K �2�.00

�2” 36T FTG .�34” .094” �” RF�236�34 ��3.0

�2” 36T FTG .�65” .��8” 70mm, 2 key* RF�236K �24.00

�2” 36T FTG .�26” .087” 3 �/8” RSM�236F �00.00

�2” 36T TCG .�26” .087” 3 �/8” RSM�236TA ��0.00

�2” 36T TCG .�65” .��8” 3 �/8” RSM�236TB �3�.00

350mm 48T TCG 4.2mm 3.0mm 95mm, 2 key, 8 pins RF3504895T 265.00

350mm 48T TCG 4.2mm 3.0mm �20mm, 2 key RF35048�20T 265.00

�4” 24T FTG .�42” .�02” �” RF�424 �48.00

�4” 24T FTG .�70” .��8” �” RF�424�70 �59.00

�4” 24T FTG .�94” .�34” �” RF�424�94 �40.00

�4” 24T FTG .�42” .�02” 70mm, 2 key* RF�424K �48.00

�4” 24T FTG .�77” .�34” 3 �/8” RSM�424T �60.00

�4” 30T FTG .�65” .��8” �” RF�430 �64.00

�4” 36T FTG .�65” .��8” �” RF�436 �73.00

�4” 36T FTG .�42” .�02” 70mm, 2 key* RF�436K �73.00

�4” 40T FTG .�70” .��8” �” RF�440 �86.00

�6” 24T FTG .�73” .�26” �” RF�624 �66.00

�6” 36T FTG .�73” .�26” �” RF�636 �84.00

�8” 40T FTG .�85” .�34” �” RF�840 2�2.00

20” 40T FTG .�85” .�34” �” RF2040 23�.00*�0”, �2” & �4” - 70mm bores have two 20mm x 5mm keyways for SCM Rip Saws. **RSLH comes in 3” or 4 3/�6” arbores with 3 pinholes. Fits Lauderdale Hamilton Rip Saw. ***Multi-Score Rip Saw, Split body, sold as a pair. ****For Raimann Rip Saw with 4 small 7 mm pins & 2 large �4mm pins, plus 2 keyways.

�2

Rip & Gang Saws - ATBDesigned for ripping soft or hard woods where a strong grain pattern can cause saw to drift and follow grain. ATB design helps to maintain direction and provide a clean, straight cut. These can be bored out to fit most gang rip saws. Please call for information on this service.

Glue Joint Rip SawsDesigned for operations requiring an extra smooth cut, such as solid wood pieces that will be glued together. Use these blades for rip cuts only. Glue joint rip saws can be bored out to fit most gang rip saws. Please call for information and price on this service.

Multi-Score Split SawsThese blades are used in Multiscore rip applications, with 3 mounting holes on each half. 8” x 64T (RSMS500) comes in two outside blades with a groover in between for �/2” wide groove.

*RS�224K- 70mm bores have two 20mm x 5mm keyways for SCM Rip Saws.


7 �/4” 24T ATB .��0” .079” 5/8” 20 RS72524 66.00

8” 24T ATB .��8” .079” 5/8” 20 RS824 69.00

8 �/2” 24T ATB .��8” .087” 5/8” 20 RS85024 73.00

�0” 24T ATB .�26” .087” 5/8” 20 RS�024 68.00

�0” 30T ATB .�34” .094” 5/8” 20 RS�030 8�.00

�2” 24T ATB .�34” .094” �” 20 RS�224 77.00

�2” 24T ATB .�34” .094” 70mm, 2 key* 20 RS�224K 79.00

�2” 36T ATB .�26” .087” �” 20 RS�236 97.00

�2” 36T ATB .�34” .094” �” 20 RS�236�34 ��7.00


�0” 30T TCG .�25” .087” 5/8” 20 GJ�030�25 85.00

�0” 30T TCG .�45” .�02” 5/8” 20 GJ�030 �22.00

300mm 36T TCG 4.2mm 3.2mm ***80mm, 2 key 20 GJRM30036 �33.00

300mm 48T TCG 2.8mm 2.0mm ***80mm, 2 key 20 GJRM3004828 �48.00

�2” 36T TCG .�65” .��8” �” 20 GJ�236 �24.00

�2” 36T TCG .�65” .��8” 70mm, 2 key 20 GJ�236K �29.00

�2” 36T TCG .�65” .��8” 3 �/8” 20 GJM�236�57* �38.00

�2” 48T ATB .�57” .��8” �” 20 GJ�248ATB �66.00

�2” 50T LRLRS .�34” .094” �” 20 GJL�250 �64.00

�4” 36T TCG .�77” .�38” �” 20 GJ�436�77 �6�.00

�4” 36T ATB .�77” .�38” 2”, 2 PH 20 GJ�436DA** �6�.00

�4” 36T TCG .�77” .�38” 2”, 2 PH 20 GJ�436DT** �6�.00

�4” 36T TCG .�77” .�38” 3 �/8” 20 GJM�436T �6�.00

�6” 36T TCG .�77” .�38” 2”, 2 PH 20 GJ�636** �77.00

�6” 50T TCG .�97” .�38” �” 20 GJ�650 233.00

�8” 48T TCG .�80” .�38” 2”, 2 PH 20 GJ�848** 230.00*Designed for Mereen-Johnson rip saws with 3 �/8” arbor and with one �/4” keyway. **Specially designed for cutting with Diehl saws, (2) 9/�6” pinholes at 5” bolt circle. ***For Raimann Rip Saw with 4 small 7 mm pins & 2 large �4mm pins, plus 2 keyways.


8” 60T ATB+R .�48” .087” 4 5/�6” 0 RSMS860 �50.00

�0” 40T TCG .�26” .087” 4 5/�6” 5 RSMS�040T 99.00

�0” 60T TCG .�26” .087” 4 5/�6” 5 RSMS�060T �02.00

�0” 80T HATB .�26” .087” 4 5/�6” 0 RSMS�080HA �47.00

�2” 60T TCG .�26” .087” 4 5/�6” 5 RSMS�260T �22.00

�4” 80T ATB .�50” .��0” 4 5/�6” 5 RSMS�480A �92.00

�3

Mitre & Double Mitre SawsMS and MD series saws are designed for mitre saw machines to cut molding or picture frame material. Saws with CTC (California Triple Chip) design are made to cut any wood or light metal without changing blades for different materials. For heavy aluminum or when only cutting non-ferrous metals, see Non-Ferrous Saws on page 2� & 22 .

�0” and �2” mitre saw blades have 4 laser slits in the plate for vibration and noise control. In addition, the chromed body makes cleaning easy and rust free.

Blind Cutting SawsFor cutting faux wood window blinds, these saw blades are designed to reduce chipping and to avoid melting on the material. With thinner plate, a sharper tooth angle, and one side clearance ground, this is a completely new tool for window blind fabricators.

Door Jamb SawsThis blade is designed for jamb saws to cut door jambs when installing carpet or tile. The blades feature a tapered bore with 2 pinholes.


8” 60T ATB+R .��2” .079” 5/8” -2 MD860 90.00

8 �/2” 40T ATB+R .�02” .07�” 5/8” -2 MD85040 �02.00

9” 60T ATB+R .��2” .087” 5/8” 0 MD960 �22.00

�0” 80T ATB+R .��8” .094” 5/8” -2 MD�080 �38.00

�0” 90T CTC .�26” .098” 5/8” -2 MDC�090 �89.00

�0” �00T ATB+R .��8” .094” 5/8” -2 MD�0�0 �5�.00

275mm 80T ATB 3.2mm 2.4mm 32mm �5 MD27580 �6�.00

275mm �00T ATB+R 3.0mm 2.4mm 32mm 0 MD275�00 �79.00

�2” 80T ATB .�26” .�02” 5/8” -2 MD�280ATB �68.00

�2” 80T ATB+R .�26” .�02” 5/8” -2 MD�280P �68.00

�2” 80T ATB+R .�26” .�02” �” -2 MD�280R �68.00

�2” 96T CTC .�34” .��0” 5/8” -2 MDC�296 2�5.00

�2” �00T ATB+R .�26” .�02” 5/8” -2 MD�2�0P �9�.00

�2” �00T ATB+R .�26” .�02” �” -2 MD�2�0R �9�.00

�2” �00T LRLRS .�26” .094” �” 0 MS-050 �66.00

�3” 90T ATB+R .�45” .��8” �” 2 MD�390 2�2.00

350mm �00T TCG 3.5mm 2.8mm 30mm -2 MD35030�0T 2�5.00

350mm �00T ATB+R 4.2mm 2.8mm 30mm -2 MD35030�0G 2�5.00

�4” 80T ATB+R .�34” .��0” 5/8” -2 MD�480P 203.00

�4” 80T ATB+R .�34” .��0” �” -2 MD�480R 203.00

�4” �00T ATB+R .�34” .��0” 5/8” -2 MD�4�0P 2�4.00

�4” �00T ATB+R .�34” .��0” �” -2 MD�4�0R 2�4.00

�5” �00T ATB+R .�38” .098” �” -2 MS�5�0 2�4.00

DIAMETER TEETH DESIGN KERF PLATE BORE ORDER ID PRICE

6 �/2” 40T TCG .��8” .079” �/2” PTZ65040 62.00

DIAMETER TEETH DESIGN KERF PLATE BORE HOOK FACE BVL ORDER ID PRICE

6” 70T LR .07�” .043” 5/8” �5 �0 LTL670 �35.00

205mm 80T LRLRS 2.2mm �.5mm 5/8” �0 �5 NM880 �3�.00

�0” �00T LRLRS .095” .063” 5/8” �0 �0 KC�0�0 �69.00

�2” �20T LRLRS .095” .063” �” �0 �0 KC�2�2 �92.00

�4” �20T LRLRS .�26” .094” �” �0 �0 KC�4�2 2�0.00

�4” �40T LRLRS .�02” .063” �” �0 �0 KC�4�4 2�4.00

industrial carbide saw & tool corporationcreated date: 5/31/2013 11:32:32 am

Documents