technohomelux.es...finish 3d finish 3d 3d 3d cpl explanations: panel doors, dre-cell veneer frame...

CATALOG 2016EDITION 2

FINISH

3D

FINISH

3D

3D

3D

CPL

EXPLANATIONS:

panel doors, DRE-Cell veneer

frame construction doors, DRE-Cell veneer

entrance doors, DRE-Cell veneer

technical doors, DRE-Cell veneer

panel doors, 3D veneer

frame construction doors, 3D veneer

entrance doors, 3D veneer

technical doors, 3D veneer

panel doors, lacquered HDF board

frame construction doors , Finish veneer

panel doors, laminate CPL

entrance doors, laminate CPL

technical doors, laminate CPL

panel doors, natural veneer

frame construction doors, natural veneer

entrance doors, natural veneer

panel doors, painted

frame construction doors, painted

glass doors

panel doors Sara eco

smoke-proof technical doors

fire resistant technical doors

PAINTED

PAINTED

SMOKEPROOF

FIRE RESISTANT

GLASS

SARA ECO

folding doors FOLDE 10 - white mat

2

3

TABLE OF CONTENT

Interior frame construction doors interior rebated and non-rebated door leafEMENA .............................................................................................. 5VERANO ........................................................................................... 7ENA .................................................................................................... 9TREVI ............................................................................................... 11TRIESTA ........................................................................................... 13NESTOR ..........................................................................................15AURI ................................................................................................. 17ELSA ................................................................................................. 19FOSCA ............................................................................................. 20PREMIUM .......................................................................................21PIANO.............................................................................................. 23SCALA .............................................................................................. 25

Interior frame construction doors interior rebated door leafSINCO .............................................................................................. 27VETRO A .........................................................................................29VETRO B .........................................................................................31VETRO C .........................................................................................33VETRO D ........................................................................................35VETRO F .........................................................................................37

Interior frame construction doors interior rebated and non-rebated door leafEVEN................................................................................................ 38LEXA ................................................................................................. 39

Interior panel doors painted interior rebated door leafDUO ................................................................................................. 41IVI...................................................................................................... 42

Interior panel doors painted interior rebated and non-rebated door leafUNI ................................................................................................... 43BINITO ............................................................................................. 45

Interior panel doors interior rebated and non-rebated door leaf RIVIA ............................................................................................... 47GALERIA ALU ...............................................................................49ALDEA ............................................................................................ 51ARTE B ........................................................................................... 53CARLA ............................................................................................ 55BLANCO ........................................................................................57FINEA i FINEA B ..........................................................................59DECO ............................................................................................. 61MODERN .......................................................................................63KANON ..........................................................................................65IDEA ................................................................................................ 67PLUS ............................................................................................... 69STANDARD ....................................................................................71RIM .................................................................................................. 72

Interior panel doors interior rebated door leaf DRE-Cell veneerCLASSIC .......................................................................................... 73ARTE ................................................................................................ 75FANO ............................................................................................... 76LINEA ............................................................................................... 77SOMO .............................................................................................. 78

Interior panel doors interior rebatedASCADA .........................................................................................79LACK ........................................................................................ 80-81

Interior ENTRANCE panel doors interior rebated door leafENTER/SOLID ........................................................................ 82-85

Interior panle doors interior rebated door leafSTANDARD CPL ............................................................................86

Interior panel doors interior rebated and non-rebated door leaf STANDARD 10 with variable heights .......................................87MODERN with variable heights ................................................88PLUS with variable heights.........................................................89

Interior frame construction doors interior door leaf natural veneerVETRO NATURA A .......................................................................91VETRO NATURA B .......................................................................93PREMIUM NATURA .....................................................................94DOVA NATURA .............................................................................95SCALA A NATURA ........................................................................97

Interior panel doors interior rebated door leaf natural veneerDUERO NATURA ALU .................................................................99ARTE NATURA............................................................................ 101STANDARD NATURA ...................................................... 102-103GALERIA NATURA ............................................................ 104-105GALERIA NATURA ALU ................................................... 106-107

Interior panel doors interior non-rebated door leaf natural veneerGALERIA NATURA NON-REBATED ...................................... 108STANDARD NATURA NON-REBATED ................................ 109GALERIA NATURA ALU NON-REBATED ............................. 111

Folding doorsFOLDE .......................................................................................... 113

Sliding systemGLASS DOORS ........................................................................... 115

Interior panel doorsSARA ECO .......................................................................... 117-118

Interior ENTRANCE panel doors interior rebated door leaf natural veneerENTER NATURA......................................................................... 119

Sliding systemWALL MOUNTED sliding system ........................................... 121

Rebated side panelsPANEL CONSTRUCTION ....................................................... 122SIDE PANEL NATURA .............................................................. 12 3FRAME CONSTRUCTION ....................................................... 124ACCESSORIES ............................................................................ 125

Transom lights and sidelightsTransom lights and sidelights .......................................... 126-127

Technical door leafFIRE RESISTANT DOOR LEAF OLIMP .................................. 128WOODEN FIRE RESISTANT DOOR FRAMES .................... 129METAL FIRE RESISTANT DOOR FRAMES .......................... 130FIRE RESISTANT DOOR LEAF ATHOS ................................. 131ANTI-BURGLARY FIRE RESISTANT FORCA........................ 132

Interior glass doorsGALLA ........................................................................................... 133GRACCA .............................................................................. 134-135GOSSA ................................................................................. 136-137Glass doors technical informations ............................... 138-139

Additional informationsDoor handles ...................................................................... 140-147Veneer colours ................................................................... 148-149Glass pane patterns .......................................................... 150-151Adjustable door frames .................................................... 152-153Adjustable door frames with variable heights ...................... 154Adjustable non-rebated door frames ..................................... 155Adjustable non-rebated door frames with variable heights 156Fixed door frames ...................................................................... 157Metal door frames ...................................................................... 158Adjustable tunnel ....................................................................... 159Architraves and skirting boards ............................................... 160Ventilation accessories .............................................................. 161TECHNICAL INFORMATIONS ....................................... 162-170

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

EMENA dark wenge

elm tabacash golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak

texturedoaksandwhite pine siberian

elmwhite

(structure)elm

anthracite wenge dark wenge textured***

DecorDRE-Cell

*** decor available only in horizontal wood grain

4

CELL

EMENA 3 EMENA 4 EMENA 5EMENA EMENA 1 EMENA 2

STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick

OPTION WITHOUT ADDITIONAL CHARGE » glass pane DECORMAT BROWN, DECORMAT GRAPHITE and transparent glass pane

» holes for ventilation sleeves

OPTIONS AVAILABLE WITH EXTRA CHARGE » steel ventilation sleeves » plastic ventilation sleeves » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » cover-up strip for double leaf non-rebated door » double leaf door

NOTE: It is required to use together with EMENA door leaf model door frames equipped with 3 hinges.

REBATED DOOR LEAF » straight edge fig. 1 » 3 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock

NON-REBATED DOOR LEAF (extra charge)

» edge without rebate fig. 2 » sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)

» magnetic lock for simple key, for bathroom lock, for cylinder lock or economic lock

SLIDING SYSTEM DOOR LEAF » edge without rebate fig. 2 » socket for hook lock and/or for handles

EMENAREBATED AND NON-REBATED DOOR LEAF

interior door leaf

Door leaf width: single leaf door „60”÷”100”, rebated double leaf door „120” ÷ „200”, non-rebated double leaf door„120” ÷ „180” Technical informations: door frames: pp. 152-158, accessories: pp.125, 140-147 and 161, door leaf: 162-170

straightedge

fig. 1

edge withot rebate

fig. 2

5

VERANO oak sand


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


DecorDRE-Cell


6

CELL





NOTE: It is required to use together with VERANO door leaf model door frames equipped with 3 hinges.






VERANO 3 VERANO 5VERANO 4VERANO 2VERANO 1VERANO

VERANOREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straightedge

fig. 1

edge without rebate

fig. 2

7

ENA dark wenge


polish oak 3Delm walnut

american ebony

elm tabacwhite mat ash golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm

anthracite

wenge dark

vanilla***

wenge textured***

DecorDRE-Cell

Decor 3D

8

3DCELL










NOTE: It is required to use together with ENA door leaf model door frames equipped with 3 hinges.

ENA ENA 4 ENA 5ENA 1 ENA 2 ENA 3

ENAREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straightedge

rys. 1

edge withoutrebate

rys. 2

9

TREVI 2 dark walnut texture


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


DecorDRE-Cell


10

CELL

TREVI 4 TREVI 5 TREVI 6TREVI 1 TREVI 2 TREVI 3










NOTE: It is required to use together with TREVI door leaf model door frames equipped with 3 hinges.

TREVIREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

fig. 1

edge without rebate

fig. 2

11

TRIESTA wenge texture


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


DecorDRE-Cell


12

CELL

TRIESTA 2 TRIESTA 3TRIESTA TRIESTA 1










NOTE: It is required to use together with TRIESTA door leaf model door frames equipped with 3 hinges.

TRIESTAREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straightedge

fig. 1

edge without rebate

fig. 2

13

polish oak 3D

white mat ash oaksandwhite pine elm

anthracite wenge dark

Decor DRE-Cell

Decor 3D

FREE MONDO DOOR HANDLE WITH BACKPLATE(available only with rebated and non-rebated door leaf in NESTOR and ELSA

collections in DRE-CELL and 3D decor) colour satin nickel

door handle MONDO - satin nickel backplate for simple key lock

backplate for cylin-der lock

backplate for toilet lock

+ or or

NESTOR 1 polish oak 3D

14

3DCELL










NOTE: It is required to use together with NESTOR door leaf model door frames equipped with 3 hinges.


NESTORREBATED AND NON-REBATED DOOR LEAF

interior door leaf

NESTOR 1 NESTOR 2 NESTOR 3 NESTOR 4

NESTOR 7

NESTOR 5

NESTOR 8NESTOR 6 NESTOR 9panelNESTOR

straight edge

fig. 1

edge without rebate

fig. 2

15

AURI dark wenge



american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


wenge textured***

DecorDRE-Cell

Decor 3D

16

3DCELL

AURI AURI 4 AURI 5AURI 1 AURI 2 AURI 3

AURIREBATED AND NON-REBATED DOOR LEAF

interior door leaf










NOTE: There is possibility to make rebated „40” side panels. It is required to use together with AURI door leaf model door frames equipped with 3 hinges.


straight edge

fig. 1

edge without rebate

fig. 2

17

ELSA anthracite elm

polish oak 3D

white mat ash oaksandwhite pine elm


Decor DRE-Cell

Decor 3D

FREE MONDO DOOR HANDLE WITH BACKPLATE(available only with rebated and non-rebated door leaf in NESTOR and ELSA

collections in DRE-CELL and 3D decor) colour satin nickel

door handle MONDO - satin nickel backplate for simple key lock

backplate for cylin-der lock


+ or or

18

3DCELL

ELSA A

ELSA B7

ELSA A4 ELSA B5

ELSA B6

ELSA A1

ELSA

ELSA A2

ELSA B

ELSA A3





ELSA collection is divided into A and B:A - flat panel insert in door leaf colour B - convex panel insert in door leaf colour






NOTE: There is possibility to make rebated „40” side panels. It is required to use together with ELSA door leaf model door frames equipped with 3 hinges.

ELSAREBATED AND NON-REBATED DOOR LEAF

interior door leaf


panel ELSA A, A1-A7 panel ELSA B, B1-B7

straight edge

fig. 1

edge without rebate

fig. 2

19

3DCELL


american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm

anthracite

wenge dark

vanilla***

wenge textured***

DecorDRE-Cell

Decor 3D



FOSCAREBATED AND NON-REBATED DOOR LEAFinterior door leaf

FOSCA(5 glass panes)

FOSCA 4(3 glass panes, 2

HDF panels)

FOSCA 5(1 glass pane, 4

HDF panels)

FOSCA 6(5 HDF panels)

FOSCA 1(3 glass panes, 2

HDF panels)

FOSCA 2(1 glass pane, 4 HDF

panels)

FOSCA 3(5 HDF panels)

FOSCA 1-3(4 mm HDF insert coated with silver

laminate)

FOSCA 4-6(4 mm HDF

insert in door leaf colour)






STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » flat panel insert coated with silver laminate (FOSCA 1-3) or in door leaf colour (FOSCA 4-6)




NOTE: There is possibility to make rebated „40” side panels. It is required to use together with FOSCA door leaf model door frames equipped with 3 hinges.

straight edge

fig. 1

edge without rebate

fig. 2

20

3DCELL


american ebony

elm tabacwhite mat ash golden oak textured

walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm

anthracite

wenge dark

vanilla***

wenge textured***

DecorDRE-Cell

Decor 3D





SLIDING SYSTEM DOOR LEAF » edge without rebate fig. 2 » socket for hook lock and/or for handles *PREMIUM 4-7

(4 mm HDF inserts in door

leaf colour)

**PREMIUM 8-11 (4 mm HDF inserts coated with silver

laminate )

PREMIUM, PREMIUM 1-3

(4 mm glass pane

STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » flat panel insert coated with silver laminate (PREMIUM 8-11) or in door leaf colour (PREMIUM 4-7)




NOTE: There is possibility to make rebated „40” side panels. It is required to use together with PREMIUM door leaf model door frames equipped with 3 hinges.

PREMIUMREBATED AND NON-REBATED DOOR LEAF

interior door leaf

PREMIUMPREMIUM 4*PREMIUM 8**

PREMIUM 1PREMIUM 5*PREMIUM 9**





straight edge

fig. 1

edge without rebate

fig. 2

21

PIANO - ebony


american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm

anthracite

wenge dark

vanilla***

wenge textured***

DecorDRE-Cell

Decor 3D


22

3DCELL






STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » 16 mm convex panel (PIANO 1-2, PIANO 5-6) or 19 mm convex panel (PIANO 9-12)




NOTE: There is possibility to make rebated „40” side panels. It is required to use together with PIANO door leaf model door frames equipped with 3 hinges.

PIANOREBATED AND NON-REBATED DOOR LEAF

interior door leaf


PIANO PIANO 6PIANO 4 PIANO 5PIANO 1 PIANO 2 PIANO 3

PIANO 12

panel PIANO 9-12

PIANO 9 PIANO 10 PIANO 11

straight edge

fig. 1

edge without rebate

fig. 2

23

SCALA - dark walnut texture

FREE STYLISH PRIMA DOOR HANDLE WITH BACKPLATE (available only with rebated and non-rebated door leaf in SCALA collection in DRE-CELL

and 3D decor) colour satin nickel

backplate for simple key

lock

backplate for cylinder lock


+ or or


american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm

anthracite

wenge dark

vanilla***

wenge textured***

DecorDRE-Cell

Decor 3D


24

3DCELL

SCALA A

SCALA B7

SCALA A4

SCALA B5 SCALA B6

SCALA A1

SCALA

SCALA A2 SCALA A3

STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » flat panels (SCALA A), 19 mm profiled MDF panels (SCALA B)




SCALA collection is divided into A and B:A - flat panel insert in door leaf colour B - convex panel insert in door leaf colour






NOTE: There is possibility to make rebated „40” side panels. It is required to use together with SCALA door leaf model door frames equipped with 3 hinges.

SCALAREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

fig. 1

edge without rebate

fig. 2

panel SCALA A, A1-A7 panel SCALA B, B1-B7

25

SINCO virginia

Finishveneer

oakoak sonoma virginia niagaraelmbleached walnut

26

FINISH

SINCO A2SINCO

panel SINCO

SINCO A SINCO A1 SINCO A3 SINCO A4

SINCO A5 SINCO A7SINCO A6

Door leaf width: single leaf door „60”÷”100”Technical informations: door frames: pp. 152-158, accessories: pp.125, 140-147 and 161, door leaf: 162-170


STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » flat panels

OPTION WITHOUT ADDITIONAL CHARGE » holes for ventilation sleeves

OPTIONS AVAILABLE WITH EXTRA CHARGE » steel ventilation sleeves » plastic ventilation sleeves » door leaf „90” and „100” » ventilation undercut

NOTE: It is required to use together with SINCO door leaf model door frames equipped with 3 hinges.

SINCOREBATED DOOR LEAF

interior door leaf

straight edge

fig. 1

27

VETRO A1 wenge texture



american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


wenge textured***

DecorDRE-Cell

Decor 3D

28

3DCELL

VETRO A5VETRO A2

VETRO A11

VETRO A3

VERTO A12 VERTO A14

VETRO A4

VERTO A13 VERTO A15

VETRO A1 VETRO A8 VETRO A9

VETRO A10

STANDARD OPTION » frame made of MDF additionally reinforced with plywood » core made of perforated chipboard » 8 mm tempered glass

OPTION WITHOUT ADDITIONAL CHARGE » there is possibility to make ventilation undercut » door leaf with revers positioning of glass pane » VETRO A1 four possible types of glass pane: DECORMAT, DECORMAT BROWN, DECORMAT GRAPHITE and transparent glass

REBATED DOOR LEAF » R5 edge fig. 1 » 3 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock


NOTE: There is no possibility to shorten door leaf. It is required to use together with VETRO door leaf model door frames equipped with 3 hinges. VETRO A - „80”-„100” - with ventilation undercut fulfill ventilation requirements.

VETRO AREBATED DOOR LEAF

interior door leaf


matt side of glass with pattern

plain side of glass with print screenR5 edge

R5 edge plain side of glass

matt side of glass

8 mm tempered glass

8 mm tempered glass

Vertical cross-section of door leaf A1 - A4

Horizontal cross-section of door leaf VETRO A5, A8-A15

ventilation undercut (A)

VETRO collection glass panes have obverse and reverse sides (important in juxtaposition of doors opening inversely).Presented horizontal cross-sections shows the arrangement of glass pane in the obverse version. When choosing a reverse version, glass pane is rotated by 180° around the vertical axis.

R5edge

fig. 1

edge without rebate

fig. 2

NEW NEW NEW NEW

29

VETRO B1 - ebony


american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


wenge textured***

DecorDRE-Cell

Decor 3D


30

3DCELL

VETRO B1

VETRO B10

VETRO B5

VETRO B14

VETRO B8

VETRO B15

VETRO B9VETRO B2

VETRO B11

VETRO B3

VETRO B12

VETRO B4

VETRO B13

STANDARD OPTION » frame made of MDF additionally reinforced with plywood » core made of perforated chipboard » 8 mm tempered glass

OPTION WITHOUT ADDITIONAL CHARGE » there is possibility to make ventilation undercut (B) » door leaf with revers positioning of glass pane » VETRO B1 four possible types of glass pane: DECORMAT, DECORMAT BROWN, DECORMAT GRAPHITE and transparent glass



NOTE: There is no possibility to shorten door leaf. It is required to use together with VETRO door leaf model door frames equipped with 3 hinges. VETRO B - doesnt fulfill ventilation requirements.

VETRO BREBATED DOOR LEAF

interior door leaf





matt side of glass

8 mm tempered glass

8 mm tempered glass

Horizontal cross-section of VETRO B1 - B4

Horizontal cross-section of VETRO B5, B8-B15


ventilation undercut (B)

VETRO B - doesnt fulfill ventilation requirements

R5edge

fig. 1

edge without rebate

fig. 2

NEW NEW NEW NEW

31

VETRO C5 golden oak texture


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


DecorDRE-Cell


32

CELL

VETRO C1decormat graphite

VETRO C5 VETRO C8VETRO C1transparent glass pane

VETRO C9

VETRO C1decormat

VETRO C10

VETRO C1decormat brown

STANDARD OPTION » frame with fixed width made of MDF additionally reinforced with plywood

» core made of perforated chipboard » 8 mm tempered glass with different width, dependent on width of the door leaf

OPTION WITHOUT ADDITIONAL CHARGE » there is possibility to make ventilation undercut (C) » door leaf with revers positioning of glass pane » VETRO C1 four possible types of glass pane: DECORMAT, DE-CORMAT BROWN, DECORMAT GRAPHITE and transparent glass


NOTE: There is no possibility to shorten door leaf. It is required to use together with VETRO door leaf model door frames equipped with 3 hinges. VETRO C - „80”-„100” - with ventilation undercut fulfill ventilation requirements.

VETRO CREBATED DOOR LEAF

interior door leaf


ventilation undercut (C)




matt side of glass

8 mm tempered glass

8 mm tempered glass

Horizontal cross-section of VETRO C1

Horizontal cross-section of VETRO C5 and C8-C10


R5edge

fig. 1

33

VETRO D1 ebony


american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


wenge textured***

DecorDRE-Cell

Decor 3D


34

3DCELL

VETRO D1transparent glass pane

VETRO D1decormat

VETRO D1decormat brown

VETRO D1decormat graphite

STANDARD OPTION » frame made of MDF additionally reinforced with plywood: narrow element with fixed width, wide element with different width

» core made of perforated chipboard » 8 mm tempered glass with fixed width, (regardless of the door leaf width)

OPTION WITHOUT ADDITIONAL CHARGE » door leaf with revers positioning of glass pane


NOTE: There is no possibility to shorten door leaf. It is required to use together with VETRO door leaf model door frames equipped with 3 hinges. VETRO D - doesnt fulfill ventilation requirements.


VETRO DREBATED DOOR LEAF

interior door leaf


R5edge

fig. 1

edge without rebate

fig. 2

35

VETRO F1 dark walnut texture


walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm


DecorDRE-Cell


36

CELL

VETRO F1decormat brown

VETRO F1decormat graphite

VETRO F1transparent glass pane

VETRO F1decormat

STANDARD OPTION » frame made of MDF additionally reinforced with plywood: narrow element with fixed width, wide element with different width

» core made of perforated chipboard » 8 mm tempered glass with fixed width, (regardless of the door leaf width)

OPTION WITHOUT ADDITIONAL CHARGE » door leaf with revers positioning of glass pane

VETRO collection glass panes have obverse and reverse sides (impor-tant in juxtaposition of doors opening inversely).When choosing a re-verse version, glass pane is rotated by 180° around the vertical axis.


NOTE: There is no possibility to shorten door leaf. There is no possibility to make ventilation undercut.It is required to use together with VETRO door leaf model door frames equipped with 3 hinges. VETRO F - doesnt fulfill ventilation requirements.

VETRO FREBATED DOOR LEAF

interior door leaf


R5edge

fig. 1

37


ecru latte ashenwhite water--based UV

warnish

Decor

EVEN 3 EVEN 4EVEN EVEN 1 EVEN 2

EVENREBATED AND NON-REBATED DOOR LEAF, PAINTEDinterior door leaf

STANDARD OPTION » door leaf painted with water-based UV varnish » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick









NOTE: It is required to use together with EVEN door leaf model door frames equipped with 3 hinges. To ensure the highest quality of painted products, before painting porcess, both, door leaf and door frames are coated with special material which constitues solid base.

straight edge

fig. 1

edge without rebate

fig. 2

PAINTED

38


LEXA A3 LEXALEXA A LEXA A1 LEXA A2

lattewhite water--based UV

varnishecru ashen

Decor

LEXAREBATED AND NON-REBATED DOOR LEAF, PAINTED

interior door leaf

STANDARD OPTION » door leaf painted with water-based UV varnish » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » painted 19 mm MDF panels









NOTE: It is required to use together with LEXA door leaf model door frames equipped with 3 hinges. To ensure the highest quality of painted products, before painting porcess, both, door leaf and door frames are coated with special material which constitues solid base.

straight edge

fig. 1

edge without rebated

fig. 2

panel LEXA

PAINTED

39

DUO 30s white/polish oak 3D

oaksand

whitewater-basedUV varnish

door leaf surface

Decor

DecorDRE-Cell

Decor 3Dpolish oak

3D ebony

walnutgolden oak

40

PAINTED

DUO 10

DUO 60

DUO 30s

DUO 40 DUO 50

DUO 20

DUO 70

DUO 20s DUO 30

STANDARD OPTION » door leaf surface painted with white acrylic varnish with strengthe-ned resistance to abrasion

» door leaf frame made of MDF » core made of „honeycomb” » glass pane MAT DRE 4 mm thick

OPTION WITHOUT ADDITIONAL CHARGE » white ventilation sleeves » three hinges

OPTIONS AVAILABLE WITH EXTRA CHARGE » core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille

REBATED DOOR LEAF » „karnies” edge, rounded profile of glazing bar, flat panels ( 4mm HDF) in glazing bar colour fig. 1

» 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock

NOTE: Door leaf surface is painted in white, selected colour applies to glazing bars, panels and door leaf edge.

DUOREBATED DOOR LEAF, PAINTED

interior door leaf


„karnies”edge

25x16 mm

rounded glazing bar

flat panel

fig. 1

41


STANDARD OPTION » door leaf surface painted with white acrylic varnish with strengthe-ned resistance to abrasion

» door leaf frame made of MDF » core made of „honeycomb” » glass pane MAT DRE 4 mm thick

OPTION WITHOUT ADDITIONAL CHARGE » white ventilation sleeves » three hinges

OPTIONS AVAILABLE WITH EXTRA CHARGE » core made of perforated chipboard » door leaf „90” and „100” » IVI 10 » IVI 20-40 » ventilation undercut » plastic ventilation grille

REBATED DOOR LEAF » straight edge, plastic glazing bar fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock

white acrylic UV varnish

Decor

IVI 40IVI 10 IVI 20 IVI 30

IVIREBATED DOOR LEAF, PAINTEDinterior door leaf

straight edge

28x19 mm

plastic glazing bar

fig. 1

PAINTED

42


STANDARD OPTION » door leaf painted with water-based UV varnish » door leaf frame made of softwood » core made of „honeycomb” » glass pane white bark 4 mm thick

OPTION WITHOUT ADDITIONAL CHARGE » glass pane „chinchila” or „window blind” » ventilation sleeves » three hinges - applies to rebated door leaf

OPTIONS AVAILABLE WITH EXTRA CHARGE » glass pane MAT DRE, DECORMAT BROWN, DECORMAT GRAPHITE (it refers to door leaf model BULAJ MDF)

» core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » non-rebated door leaf » cover-up strip for double leaf non-rebated door » plastic ventilation grille » aluminum ventilation grille » double leaf door » there is possibility to purchase BULAJ separately






lattewhte water--based UV

varnishecru ashen

Decor

steel BULAJ

UNI 10 BULAJ MDF

UNIREBATED AND NON-REBATED DOOR LEAF, PAINTED

interior door leaf

straight edge

fig. 1

edge without rebate

fig. 2

steel BULAJ(available only MAT or transparent glass pane)

PAINTED

43

BINITO 23 white

lattewhite water--based UV

varnishecru ashen

Decor

44

PAINTED

BINITO 10

BINITO 23

BINITO 60

BINITO 11 BINITO 21

BINITO 20

BINITO24

BINITO 30 BINITO 50

STANDARD OPTION » door leaf painted with water-based UV varnish » door leaf frame made of softwood » core made of „honeycomb” » glass pane white bark 4 mm thick


» NOTE: To ensure the highest quality of painted products, before painting porcess, both, door leaf and door frames are coated with special material which constitues solid base.

OPTIONS AVAILABLE WITH EXTRA CHARGE » glass pane MAT DRE, DECORMAT BROWN, DECORMAT GRAPHITE, (applies to door leaf)

» BINITO 11, 23 » BINITO 21 » BINITO 24 » door leaf „90” and „100” » core made of perforated chipboard » ventilation undercut » non-rebated door leaf » cover-up strip for double leaf non-rebated door » plastic ventilation grille » aluminum ventilation grille » double leaf door






BINITOREBATED AND NON-REBATED DOOR LEAF, PAINTED

interior door leaf


straight edge

edge without rebate

21x16 mm

21x16 mm

flat glazing bar

flat glazing bar

fig. 1

fig. 2

types of milling in BINITO collection

45

RIVIA 10 - white mat/american walnut


american ebony

elm tabac

white mat ash golden oaktextured

walnut dark

texturedgray oaktextured

bleached oak


elm calvados

walnut

darkcherry

walnutsatin

elmanthracite

wengedark

Decor DRE-Cell

Decor 3D

silver alderbeech golden oak

46

CELL 3D

RIVIA 10

RIVIA 80

RIVIA 50

RIVIA 60 RIVIA 70***

RIVIA 20

RIVIA 90

RIVIA 30 RIVIA 40

STANDARD OPTION » door leaf frame made of softwood » core made of perforated chipboard » glass pane white bark 4 mm thick



» RIVIA 20, 30 » RIVIA 40, 50 » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille

REBATED DOOR LEAF » straight edge, flat uniform glazing bar fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock





NOTE: Door leaf is coated with decor white mat. There is possibility to choose middle stripe in the colour of selected decor. Edgeband is in the colour of selected decor. RIVIA 50 - BULAJ is coated with silver laminate.

*** In RIVIA 70 model colour of the selected decor has vertical wood grain, except decor gray oak texture. In remaining models decors have horizontal wood grain.

RIVIAREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

edge without rebate

flat unifrom glazing bar

flat uniform glazing bar

fig. 1

fig. 2

47

GALERIA ALU 13 elm tabac


american ebony

elm tabacwhite mat golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elmelm

anthracitewengedark


Decor 3D

Decor DRE-Cell 2

silver

ashwhite(structure) alderbeech calvados walnutdark

cherrywalnutsatingolden oak

Decor DRE-Cell 1

48

CELL 3D

GALERIA ALU 10

GALERIA ALU 13

GALERIA ALU 60

GALERIA ALU 24

GALERIA ALU 11

GALERIA ALU 25

GALERIA ALU 12GALERIA ALU 20

GALERIA ALU 21

GALERIA ALU 30

GALERIA ALU 22

GALERIA ALU 50

GALERIA ALU 23

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb” » aluminum marquetry elements with cross-section 8X2 mm » glass pane white bark 4 mm thick



» GALERIA ALU 11,13,23 » GALERIA ALU 21 » GALERIA ALU 24,25 » GALERIA ALU 24,25 » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door






NOTE: Passive door leaf GALERIA ALU 20,21,22,23,24,25,60 are not equipped in aluminum marquetry elements in uniform wood grain.

GALERIA ALUREBATED AND NON-REBATED DOOR LEAF

interior door leaf

aluminum marquetry elements with cross-section 8x2mminstalled in one surface of door leaf


straight edge

edge without rebate

21x16 mm

21x16 mm

flat glazing bar

flat glazing bar

fig. 1

fig. 2

49

ALDEA 40 elm tabac


american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmelm

anthracitewengedark


Decor 3D

Decor DRE-Cell 2

silver



Decor DRE-Cell 1

50

CELL 3D

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb” » glass pane white bark 4 mm thick



» ALDEA 20 » ALDEA 30 » ALDEA 40 » ALDEA 50 » ALDEA 60 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

REBATED DOOR LEAF » straight edge, flat glazing bar, 19 mm MDF profiled panels fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock


» edge without rebate, flat glazing bar, 19 mm MDF profiled panels fig. 2

» sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)


SLIDING SYSTEM DOOR LEAF » edge without rebate, flat glazing bar,19 mm MDF profiled panels fig. 2

» socket for hook lock and/or for handles

ALDEA 10 ALDEA 50 ALDEA 60ALDEA 20 ALDEA 30 ALDEA 40

ALDEAREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

edge without rebate

21x16 mm

21x16 mm

flat glazing bar

flat glazing bar

fig. 1

fig. 2

19mm profiled panel

19mm profiled panel

51

ARTE B 30 ash


american ebony


Decor 3D

Decor DRE-Cell 2


walnut dark

texturedgray oak

textured***

bleached oak


elmelm

anthracitewengedarksilver



Decor DRE-Cell 1

52

CELL 3D

ARTE B 10 ARTE B 50 ARTE B 60ARTE B 20 ARTE B 30 ARTE B 40




» ARTE B 10-30 » ARTE B 40, 50 » ARTE B 60 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

REBATED DOOR LEAF » straight edge, flat glazing bar, fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock


» edge without rebate, flat glazing bar, fig. 2 » sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)


SLIDING SYSTEM DOOR LEAF » edge without rebate, flat glazing bar, fig. 2 » socket for hook lock and/or for handles

ARTE BREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

edge without rebate

21x16 mm

21x16 mm

flat glazing bar

flat glazing bar

fig. 1

fig. 2

53

CARLA 40 white mat


american ebony


walnut dark

texturedgray oak

textured***

bleached oak


elmelm

anthracitewengedark


Decor 3D

Decor DRE-Cell 2

silver



Decor DRE-Cell 1

54

CELL 3D

CARLA 10 CARLA 20 CARLA 30 CARLA 40




» CARLA 20 » CARLA 30 » CARLA 40 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

REBATED DOOR LEAF » straight edge, flat glazing bar, 19 mm MDF profiled panels fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock


» edge without rebate, flat glazing bar, 19 mm MDF profiled panels fig. 2



SLIDING SYSTEM DOOR LEAF » edge without rebate, flat glazing bar,19 mm MDF profiled panels fig. 2


CARLAREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

edge without rebate

21x16 mm

21x16 mm

flat glazing bar

flat glazing bar

fig. 1

fig. 2

19 mm profiled panel

19 mm profiled panel

55

BLANCO 60 - white mat

white mat

Decor DRE-Cell

56

CELL

BLANCO 10

BLANCO 80

BLANCO 50 BLANCO 60 BLANCO 70BLANCO 20

BLANCO 90

BLANCO 30

BLANCO 100

BLANCO 40




» BLANCO 10,80 » BLANCO 20-40 » BLANCO 50 » BLANCO 60,100 » BLANCO 70 » BLANCO 90 » non-rebated door leaf » core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

REBATED DOOR LEAF » straight edge, flat uniform glazing bar, fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock


» edge without rebate, flat uniform glazing bar, fig. 2 » sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)


SLIDING SYSTEM DOOR LEAF » edge without rebate, flat uniform glazing bar, fig. 2 » socket for hook lock and/or for handles

BLANCOREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

edge without rebate


fig. 1

fig. 2


57

FINEA 50 dark cherry


american ebonyDecor 3D

elm tabacwhite mat*

ash

golden oaktextured

walnut dark

texturedgray oaktextured

bleached oak


elm

white(structure) alderbeech calvados walnutdark


elmanthracite

wengedarksilver

Decor DRE-Cell 1

Decor DRE-Cell 2

58

CELL 3D

FINEA 10FINEA B 10*

FINEA 50FINEA B 50*

FINEA 60FINEA B 60*

FINEA 20FINEA B 20*

FINEA 30FINEA B 30*

FINEA 40FINEA B 40*

STANDARD OPTION » door leaf frame made of softwood » core made of perforated chipboard » glass pane white bark 4 mm thick



» FINEA 20, FINEA B 20 » FINEA 30,50,60, FINEA B 30,50,60 » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille

REBATED DOOR LEAF » straight edge, flat uniform glazing bar, fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock


» edge without rebate, flat uniform glazing bar, fig. 2 » sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)


SLIDING SYSTEM DOOR LEAF » edge without rebate, flat uniform glazing bar, fig. 2 » socket for hook lock and/or for handles

FINEA and FINEA BREBATED AND NON-REBATED DOOR LEAF

interior door leaf


* FINEA B panels available only with horizontal wood grain

panels wood grain in FINEA panels horizontal wood grain in FINEA B

straight edge

edge without rebate

21x16 mm

21x16 mm

flat glazing bar

flat glazing bar

fig. 1

fig. 2

59

DECO 10 - dark cherry


american ebony

elm tabacwhite mat*

ash

golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm



elmanthracite

wengedark

* decor is not available in door leaf model with “karnies” edge


silver

Decor DRE-Cell 1

Decor DRE-Cell 2

Decor 3D

60

CELL 3D

DECO 30DECO 10 DECO 20




» DECO 10 - 30 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

REBATED DOOR LEAF » optional: straight edge, flat glazing bar, fig. 1 or „karnies” edge, rounded glazing bar fig. 2



» edge without rebate, flat glazing bar, fig. 3 » sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)


SLIDING SYSTEM DOOR LEAF » edge without rebate and optional: flat glazing bar, fig. 3 or rounded glazing bar fig. 4


DECOREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

21x16 mm

flat glazing bar

fig. 1 (TOP)

„karnies”edge

25x16 mm

25x16 mm

rounded glazing bar

rounded glazing bar

fig. 2

edge without rebate

21x16 mm

flat glazing bar

fig. 3 (TOP)

edge without rebate

fig. 4

61

MODERN 40 - white mat


american ebony

elm tabacwhite mat*

ash

golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm



elmanthracite

wengedark



silver

Decor DRE-Cell 1

Decor DRE-Cell 2

Decor 3D

62

CELL 3D

MODERN 40 MODERN 50MODERN 10 MODERN 20 MODERN 30




» MODERN 20 » MODERN 30 » MODERN 40 » MODERN 50 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door REBATED DOOR LEAF

» optional: straight edge, flat glazing bar, flat 4 mm HDF panels fig. 1 or „karnies” edge, rounded glazing bar, profiled 19 mm MDF panels fig. 2



» edge without rebate, flat glazing bar, flat 4 mm HDF panels fig. 3 » sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)


SLIDING SYSTEM DOOR LEAF » edge without rebate and optional: flat glazing bar, flat 4 mm HDF panels fig. 3 or rounded glazing bar, profiled 19 mm MDF panels fig. 4


MODERNREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

21x16 mm

flat glazing bar

flat panel

fig. 1 (TOP)

„karnies” edge

25x16 mm

rounded glazing bar

profiled 19 mm panel

fig. 2

edge without rebate

21x16 mm

flat glazing bar

flat panel

fig. 3 (TOP)

edge without rebate

25x16 mm

rounded glazing bar


fig. 4

63

KANON 30 - white mat


american ebony

elm tabacwhite mat*

ash

golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm



elmanthracite

wengedark



silver

Decor DRE-Cell 1

Decor DRE-Cell 2

Decor 3D

64

CELL 3D

KANON 40KANON 10 KANON 20 KANON 30




» KANON 20 » KANON 30 » KANON 40 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

REBATED DOOR LEAF » optional: straight edge, flat glazing bar, flat 4 mm HDF panels fig. 1 or „karnies” edge, rounded glazing bar, profiled 19 mm MDF panels fig. 2







KANONREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

21x16 mm

flat glazing bar

flat panel

fig. 1 (TOP)

„karnies”edge

25x16 mm

rounded glazing bar


fig. 2

edge without rebate

21x16 mm

flat glazing bar

flat panel

fig. 3 (TOP)

edge without rebate

25x16 mm

rounded glazing bar


fig. 4

65

IDEA 30 - elm anthracite


american ebony

elm tabacwhite mat*

ash

golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm



elmanthracite

wengedark



silver

Decor DRE-Cell 1

Decor DRE-Cell 2

Decor 3D

66

CELLCELL 3DCELLIDEA

REBATED AND NON-REBATED DOOR LEAFinterior door leaf


IDEA 70

IDEA 80 IDEA 90 IDEA 100 IDEA 120IDEA 110

IDEA 10 IDEA 40IDEA 20 IDEA 50IDEA 30 IDEA 60




» IDEA 20, 40, 50, 70, 80 » IDEA 30, 90, 100, 110, 120 » IDEA 60 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

REBATED DOOR LEAF » optional: straight edge, flat glazing bar, flat 4 mm HDF panels fig. 1 or „karnies” edge, rounded glazing bar, profiled 19 mm MDF panels fig. 2







straight edge

21x16 mm

flat glazing bar

flat panel

fig. 1 (TOP)

„karnies” edge

25x16 mm

rounded glazing bar


fig. 2

edge without rebate

21x16 mm

flat glazing bar

flat panel

fig. 3 (TOP)

edge without rebate

25x16 mm

rounded glazing bar


fig. 4

67

PLUS 30 - gray oak textured


american ebony

elm tabacwhite mat*

ash

golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm



elmanthracite

wengedark



silver

Decor DRE-Cell 1

Decor DRE-Cell 2

Decor 3D

68

CELL 3D

PLUS 10

PLUS 70

PLUS 60PLUS 50PLUS 20

PLUS 80

PLUS 40 PLUS 30




» PLUS 20 » PLUS 40, 50, 60, 70, 80 » PLUS 30 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

REBATED DOOR LEAF » optional: straight edge, flat glazing bar, flat 4 mm HDF panels fig. 1 or „karnies” edge, rounded glazing bar, flat 4 mm HDF panels fig. 2





SLIDING SYSTEM DOOR LEAF » edge without rebate, flat 4 mm HDF panels and optional: flat gla-zing bar, fig. 3 or rounded glazing bar fig. 4


PLUSREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

21x16 mm

flat glazing bar

flat panel flat panel

fig. 1 (TOP)

„karnies”edge

25x16 mm

rounded glazing bar

fig. 2

edge without rebate

21x16 mm

flat glazing bar


fig. 3 (TOP)

edge without rebate

25x16 mm

rounded glazing bar

fig. 4

69

STANDARD 40 and STANDARD 10 - walnut



DecorDRE-Cell 1


american ebony

elm tabacwhite mat*

ash

golden oak textured

walnutdark

texturedgray oak

textured***

bleached oak


elm

white(structure) alderbeech calvados walnutdark cherry walnut satingolden oak

Decor3D

DecorDRE Cell 2

elmanthracite wenge darksilver

70

CELL 3D


STANDARD 40s

BULAJ MDF steel BULAJSTANDARD 50 STANDARD 50s STANDARD 60

STANDARD 10 STANDARD 30s STANDARD 40STANDARD 20 STANDARD 20s STANDARD 30

STANDARDREBATED AND NON-REBATED DOOR LEAF

interior door leaf




» STANDARD 20, 20s, 40, 40S, BULAJ MDF » STANDRAD 50, 50s » STANDRAD 30, 30s » STANDRAD 60 » core made of perforated chipboard » non-rebated door leaf » door leaf „90” and „100” » rebated door leaf „110” (only STANDARD 10) » additional upper single point mortise lock ( available only in STAN-DARD 10 door leaf model with core made of perforated chipboard and fixed door frame )

» ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door » there is possibility to purchase BULAJ separately

REBATED DOOR LEAF » optional: straight edge, flat glazing bar,fig. 1 or „karnies” edge, rounded glazing bar fig. 2



» edge without rebate, flat glazing bar fig. 3 » sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)


SLIDING SYSTEM DOOR LEAF » edge without rebate and optional: flat glazing bar, fig. 3 or rounded glazing bar fig. 4


„karnies”edge

straight edge

edge without rebate

edge without rebate

25x16 mm 25x16 mm

rounded glazing bar

rounded glazing bar

21x16 mm

flat glazing bar

21x16 mm

flat glazing bar

fig. 1 fig. 2 fig. 3 fig. 4

steel BULAJ(available only MAT or transparent glass pane)

Additionall upper single point mortise lock

71

CELL 3DRIMREBATED AND NON-REBATED DOOR LEAFinterior door leaf

STANDARD OPTION » reinforced door leaf frame » core made of perforated chipboard » 8 mm tempered glass - DECORMAT

OPTION WITHOUT ADDITIONAL CHARGE » glass pane DECORMAT BROWN, DECORMAT GRAPHITE or transparent glass pane

» ventilation sleeves

OPTIONS AVAILABLE WITH EXTRA CHARGE » door leaf „90” and „100”: » RIM 10 » RIM 20 » RIM 30 » non-rebated door leaf » plastic ventilation grille » aluminum ventilation grille » ventilation undercut


NON-REBATED DOOR LEAF RIM 10 and RIM 20 ( extra charge )

» edge without rebate » sockets for 3 hidden concealed W1078 hinges (non-rebated door frames are equiped with hinges)


NOTE: In RIM colletion, non-rebated version of door leaf, is only availa-ble with models RIM 10 and RIM 20.

* only rebated door leaf

NOTE: It is required to use together with RIM door leaf model door frames equipped with 3 hinges. NOTE: Glass panes in RIM collection have obverse and reverse sides . When choosing a reverse version, glass pane is rotated by 180° around the vertical axis.

RIM 30*RIM 10 RIM 20



american ebony

elm tabac

white mat ash golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm calvados

walnutdarkcherry

walnutsatin

elmanthracite

wengedark


Decor DRE-Cell

Decor 3D

silver alderbeech golden oak white(structure)

straight edge

fig. 1

edge without rebate

fig. 2

72

CLASSICREBATED DOOR LEAF

interior door leaf

Door leaf width: single leaf door „60”÷”100”, rebated double leaf door „120” ÷ „200”,Technical informations: door frames: pp. 152-158, accessories: pp.125, 140-147 and 161, door leaf: 162-170

CLASSIC 20s CLASSIC 30 CLASSIC 30sCLASSIC 10 CLASSIC 20




» CLASSIC 20, 20s » CLASSIC 30,30s » core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door

REBATED DOOR LEAF » „karnies” edge, plastic glazing bar fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock

SLIDING SYSTEM DOOR LEAF » edge without rebate, plastic glazing bar, fig. 2 » socket for hook lock and/or for handles

white(structure) alderbeech calvados walnut

Decor DRE-Cell

„karnies” edge

edge without rebate

28x19 mm

28x19 mm

plastic glazing bar

plastic glazing bar

fig. 1

fig. 2

CELL

73

ARTE 50 - siberian elm

ash

golden oaktextured

walnut dark


elm



wengedark

Decor DRE-Cell 1

Decor DRE-Cell 2

74

ARTE 10 ARTE 50

ARTE 70 ARTE 80 ARTE 90

ARTE 20 ARTE 30 ARTE 40

ARTEREBATED DOOR LEAF

interior door leaf




» ARTE 10-30, 90 » ARTE 70 » ARTE 40, 50 » ARTE 80 » core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door

REBATED DOOR LEAF » „karnies” edge, rounded glazing bar fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock

SLIDING SYSTEM DOOR LEAF » edge without rebate, rounded glazing bar, fig. 2 » socket for hook lock and/or for handles


„karnies”edge

edge without rebate

25x16 mm

25x16 mm

rounded glazing bar

rounded glazing bar

fig. 1

fig. 2

CELL

75

FANO 10 FANO 30sFANO 20 FANO 20s FANO 30




» FANO 20, 20s » FANO 30, 30s » core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door

REBATED DOOR LEAF » „karnies” edge, rounded glazing bar, profiled 19mm MDF panel fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylin-der lock or economic lock

SLIDING SYSTEM DOOR LEAF » edge without rebate, rounded glazing bar, profiled 19mm MDF panel fig. 2


FANOREBATED DOOR LEAFinterior door leaf

ash

golden oaktextured

walnut dark


elm



wengedark

Decor DRE-Cell 1

Decor DRE-Cell 2


„karnies”edge

edge without rebate

25x16 mm

25x16 mm

rounded glazing bar

rounded glazing bar



fig. 1

fig. 2

CELL

76

LINEA 10 LINEA 30sLINEA 20 LINEA 20s LINEA 30




» LINEA 20, 20s » LINEA 30, 30s » core made of perforated chipboard » additional upper single point mortise lock ( available only in LINEA 10 door leaf model with core made of perforated chipboard and fixed door frame )

» door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door

REBATED DOOR LEAF » „karnies” edge, rounded glazing bar fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock

SLIDING SYSTEM DOOR LEAF » edge without rebate, rounded glazing bar fig. 2 » socket for hook lock and/or for handles

LINEAREBATED DOOR LEAF

interior door leaf



Decor DRE-Cell


„karnies”edge

25x16 mm

rounded glazing bar

fig. 1

edge without rebate

25x16 mm

rounded glazing bar

fig. 2

Optional:Additionall upper

single point mortise lock (available only in LINEA 10 door leaf model with core made of perforated chipboard and fixed door

frame )

CELL

77


SOMO 30SOMO 10 SOMO 20

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb” » glass pane MAT DRE4 mm thick

OPTION WITHOUT ADDITIONAL CHARGE » ventilation sleeves » three hinges - applies to rebated door leaf

OPTIONS AVAILABLE WITH EXTRA CHARGE » core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door

REBATED DOOR LEAF » „karnies” edge, rounded glazing bar, profiled 19mm MDF panel fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylin-der lock or economic lock

SLIDING SYSTEM DOOR LEAF » edge without rebate, rounded glazing bar, profiled 19mm MDF panel fig. 2


SOMOREBATED DOOR LEAFinterior door leaf

Decor DRE-Cell 1

ash walnutsatingolden oak

„karnies”edge

edge without rebate

25x16 mm

25x16 mm

rounded glazing bar

rounded glazing bar



fig. 1

fig. 2

CELL

78

Door leaf width: single leaf door „60”÷”100”,Technical informations: door frames: pp. 152-158, accessories: pp.125, 140-147 and 161, door leaf: 162-170

ASCADA 10 ASCADA 50 ASCADA 60ASCADA 20 ASCADA 30 ASCADA 40

STANDARD OPTION » door leaf frame made of MDF » core made of „honeycomb” » lacquered HDF board » glass pane MAT DRE4 mm thick

OPTION WITHOUT ADDITIONAL CHARGE » ventilation sleeves » three hinges - applies to rebated door leaf

OPTIONS AVAILABLE WITH EXTRA CHARGE » door leaf „90” and „100” » plastic ventilation grille » ventilation undercut

REBATED DOOR LEAF » optional: „karnies” edge fig. 1 or straight edge fig. 2 » rounded glazing bar, flat 4 mm HDF board » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock

NOTE: Due to different manufacturing technology: » ASCADA door leaf- lacquered HDF board » door frames, architraves, Finish quarter rounds - which are coated with Finish decor

» door leaf edges - edge banding » glazing bars, flat 4 mm HDF boards coated with Finish decor.

There are colour differences between those elements.

ASCADAREBATED DOOR LEAF

interior door leaf

Lacquered HDF boardcalvadosoak walnutalder virginia niagaraelm

bleached

„karnies”edge

straight edge

25x16 mm 25x16 mm

rounded glazing bar

rounded glazing bar

flat panelflat panel

fig. 1 fig. 2

FINISH

79


LACK 30 LACK 30sLACK 10 LACK 20 LACK 20s

STANDARD OPTION » door leaf frame made of MDF » core made of „honeycomb” » lacquered HDF board » glass pane white bark 4 mm thick

OPTION WITHOUT ADDITIONAL CHARGE » glass pane „chinchila” » ventilation sleeves » three hinges - applies to rebated door leaf

OPTIONS AVAILABLE WITH EXTRA CHARGE » glass pane MAT DRE, (applies to door leaf) » LACK 20, 20s, 40, 40s » LACK 30, 30s » LACK 50, 50s » core made of perforated chipboard » door leaf „90” and „100” » additional upper single point mortise lock ( available only in LACK 10 door leaf model with core made of perforated chipboard and fixed door frame )

» plastic ventilation grille » ventilation undercut

REBATED DOOR LEAF » optional: „karnies” edge fig. 1 or straight edge fig. 2 » rounded glazing bar (Lack 20,30,40,40s,50,50s) or plastic glazing bar (Lack 20s,30s)


NOTE: Due to different manufacturing technology: » LACK door leaf- lacquered HDF board » door frames, architraves, Finish quarter rounds - which are coated with Finish decor

» door leaf edges - edge banding » glazing bars, flat 4 mm HDF boards coated with Finish decor.


LACKREBATED DOOR LEAFinterior door leaf

Lacquered HDF board white beech calvadosoak walnutalder virginia niagaraelm

bleached

„karnies”edge

straight edge

25x16 mm 25x16 mm

rounded glazing bar

rounded glazing bar

fig. 1 fig. 2

28x19 mm28x19 mm

plastic glazing bar

plastic glazing bar

FINISH

80

Door leaf width: single leaf door „60”÷”100Technical informations: door frames: pp. 152-158, accessories: pp.125, 140-147 and 161, door leaf: 162-170

LACK 50 LACK 50sLACK 40 LACK 40s

LACKREBATED DOOR LEAF

interior door leaf

white beech calvadosoak walnutalder virginia niagaraelm bleached

Lacquered HDF board

Optional:

Additional upper single point mortise lock, available only in LACK 10 door leaf model

with core made of perforated chipboard and fixed door frame.

FINISH

81

APPLICATION

Door leaf ENTER and SOLID can be used as internal entrance door in multifamily buildings and in public utility buildings.

It is reccomended to use together with door leaf collection ENTER/SOLID fixed door frame ENTER/SOLID or metal door frame. DOOR LEAF CONSTRUCTIONConstruction door leaf frame is made of MDF board, additionally rein-forced with two flat metal bars. Core is made of perforated chipboard. Door leaf unit, as a set together with fixed door frame ENTER/SOLID and dropping seal, has increased acustic insulation (Rw=32dB), or as a set together with fixed door frame ENTER/SOLID and metal threshold, or as a set together with metal door frame and dropping seal or metal threshold, has increased acustic insulation (Rw=27dB). External HDF board is ennobled with DRE-Cell veneer - optional - flat finishing or de-corative milling.

Door leaf models ENTER/SOLID 0 are available with 0,7 - 0,8 mm CPL laminate - to place an order and for more information please contact Customer Service Department.


ENTER/SOLID 0 ENTER/SOLID 4 ENTER/SOLID 5ENTER/SOLID 1 ENTER/SOLID 2 ENTER/SOLID 3


STANDARD OPTION » door leaf frame made of MDF additionally reinforced with two flat metal bars

» core made of perforated chipboard » external HDF board - flat or with decorative milling » 3 silver screw-in pivot hinges » straight edge fig. 1

REBATED DOOR LEAF MODEL ENTER: » bottom deadbolt lock adapted for door lock cylinder » upper deadbolt lock adapted for door lock cylinder

REBATED DOOR LEAF MODEL SOLID: » multipoint mortise lock adapted for door lock cylinder CLASS „C” » hinges reinforced with anti-thrust bolts

NOTE: Colours equivalentW0118 - WHITEU708_ST15 - LIGHT GRAY; NCS=S2000-N; RAL=7047;PANTONE=420 CU963_ST15 - DARK GRAY; NCS=S7500-N; RAL=7024;PANTONE=426 U

ENTER/SOLIDREBATED DOOR LEAFinterior entrance door leaf



Decor DRE-Cell 1

Decor DRE-Cell 2

white mat



CPLlaminate

Decor DRE-Cell 3

elm tabacgolden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elmelm

anthracitewengedark

silver

straight edge

fig. 1

oak welshoak gray walnut walnutcelinilight gray chestnutdark

gray acacianobel whiteVVF7206white honey oak

CPL3DCELL

82

DecorDRE-Cell 1








walnut dark

texturedgray oak

textured***

bleached oak

texturedoaksandwhite pine siebrian

elmelm

anthracitewengedark

Digital viewfinder DDS1 (separately) Digital viewfinder DDS2 (separately)

multipoint mortise lock hinges and anti-

-thrust bolts

ENTER and SOLID cross-section

flat metal bar

MDF board

perforated chipboard

Viewfinder(separately)

Stainless steel threshold

(70 mm wide)

Upper deadbolt lock(only ENTER)

Dropping seal

DecorDRE-Cell 3

OPTIONS AVAILABLE WITH EXTRA CHARGE » viewfinder – included separately » digital viewfinder DDS1 - included separately » digital viewfinder DDS2 - included separately » stainless steel threshold - 70mm wide » cancellation of second lock » dropping seal

CELL

83

CPL




APPLICATION

Door leaf ENTER and SOLID can be used as internal entrance door in multifamily buildings and in public utility buildings.

It is reccomended to use together with door leaf collection ENTER/SOLID fixed door frame ENTER/SOLID or metal door frame. DOOR LEAF CONSTRUCTIONConstruction door leaf frame is made of MDF board, additionally rein-forced with two flat metal bars. Core is made of perforated chipboard. Door leaf unit, as a set together with fixed door frame ENTER/SOLID and dropping seal, has increased acustic insulation (Rw=32dB), or as a set together with fixed door frame ENTER/SOLID and metal threshold, or as a set together with metal door frame and dropping seal or metal threshold, has increased acustic insulation (Rw=27dB). External HDF board is ennobled with DRE-Cell veneer - optional - flat finishing or de-corative milling.


» core made of perforated chipboard » external HDF board - flat or with decorative milling » 3 silver screw-in pivot hinges » straight edge fig. 1

REBATED DOOR LEAF MODEL ENTER: » bottom deadbolt lock adapted for door lock cylinder » upper deadbolt lock adapted for door lock cylinder

REBATED DOOR LEAF MODEL SOLID: » multipoint mortise lock adapted for door lock cylinder CLASS „C” » hinges reinforced with anti-thrust bolts



Decor DRE-Cell 1

Decor DRE-Cell 3


walnut dark

texturedgray oak

textured***bleached

oaktextured

oaksandwhite pine siberian

elmelm

anthracitewengedark



Decor DRE-Cell 1

Decor DRE-Cell 3


walnut dark

texturedgray oak

textured***

bleached oak


elmelm

anthracitewengedark

straight edge

fig. 1

CELL

84

ENTER/SOLID 18 ENTER/SOLID 22** ENTER/SOLID 23**ENTER/SOLID 19* ENTER/SOLID 20* ENTER/SOLID 21**






Decor DRE-Cell 1

Decor DRE-Cell 2

white mat



CPLlaminate

Decor DRE-Cell 3


walnut dark

texturedgray oak

textured***

bleached oak


elmelm

anthracitewengedark

silver



Digital viewfinder DDS1 (separately) Digital viewfinder DDS2 (separately)

multipoint mortise lock hinges and anti-

-thrust bolts

ENTER and SOLID cross-section

flat metal bar

MDF board

perforated chipboard

Viewfinder (separately)

Stainless steel threshold

(70 mm wide)

Upper deadbolt lock(only ENTER)

dropping seal

NEW NEW NEW

* in models 19 and 20 veneer is glued in strips with variable wood grain** in models 21-23 there are aluminum marquetry elements

installed in one surface of door leaf

CPL3DCELL

85

Door leaf width: single leaf door „60”÷”100”, rebated double leaf door „120” ÷ „200”Technical informations: door frames: pp. 152-158, accessories: pp.125, 140-147 and 161, door leaf: 162-170

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb” » glass pane white bark 4 mm thick » CPL laminate 0,15-0,2mm or 0,7-0,8mm thick

OPTION WITHOUT ADDITIONAL CHARGE » glass pane „chinchila” or „window blind” » ventilation sleevesthree hinges - applies to rebated door leaf

REBATED DOOR LEAF » straight edge coated with edge banding » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock


STANDARD 60 BULAJ MDF steel BULAJSTANDARD 10 STANDARD 20

CPLlaminate

STANDARD CPLREBATED DOOR LEAFinterior door leaf


» STANDARD 20, BULAJ » STANDARD 60 » core made of perforated chipboard » door leaf „90” and „100” » rebated door leaf „110” (only STANDARD 10) » additional upper single point mortise lock ( available only in STAN-DARD 10 door leaf model with core made of perforated chipboard and fixed door frame )

» plastic ventilation grille » aluminum ventilation grille » ventilation undercut » double leaf door » there is possibility to purchase BULAJ separately

There is available 0,7-0,8 mm CPL laminate - to place an order and for more information please contact Customer Service Department.

25x19 mm

straight edge

rounded glazing bar

fig. 1



steel BULAJ(available only MAT

or transparent glass pane)

Additionall upper single point mortise lock (available only in STANDARD 10 door leaf model with core

made of perforated chipboard and fixed door frame)

CPL

86

edge without rebate


198 STANDARD 10 standard height 211 STANDARD 10 224 STANDARD 10

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb”

OPTION WITHOUT ADDITIONAL CHARGE ventilation sleeves

Door leaf, dependent on selected height option- 1983mm, 2110mm or 2240mm is dedicated to door frames with three hinges in correspon-ding heights.


STANDARD 10REBATED AND NON-REBATED DOOR LEAF WITH DIFFERENT HEIGHT

interior door leaf

OPTIONS AVAILABLE WITH EXTRA CHARGE » core made of: perforated chipboard (1983) perforated chipboard (2110 and 2240)

» door leaf „90” and „100” (1983) » door leaf „90” and „100” (2110 and 2240) » non-rebated door leaf » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » cover-up strip for double leaf non-rebated door » double leaf door

There is available 0,7-0,8 mm CPL laminate - to place an order and for more information please contact Customer Service Depart-ment.

*** decor available only in horizontal wood grainDecor

DRE-Cell 1

elm tabacwhite mat

ash

golden oak textured

walnutdark

texturedgray oak

textured***

bleached oak

texturedoak sandwhite pine siberian

elm


CPLlaminate

DecorDRE-Cell 2


straight edge

fig. 1 fig. 2





oak welshoak gray walnut walnutcelinilight gray chestnutdark gray acacia

nobel whiteVVF7206white honey oak

CPLCELL

87


224 MODERN 30198 MODERN 30 standard height 211 MODERN 30


OPTION WITHOUT ADDITIONAL CHARGE » glass pane „chinchila” or „window blind” » ventilation sleeves


» MODERN 20 » MODERN 30 » MODERN 40 » MODERN 50 core made of: perforated chipboard (1983) perforated chipboard (2110 and 2240)


NOTE: Different heights are available in all models of MODERN col-lection.

Door leaf, dependent on selected height option- 1983 mm, 2110 mm or 2240 mm is dedicated to door frames with three hinges in corre-sponding heights.

REBATED DOOR LEAF » straight edge, flat glazing bar (CPL laminate-rounded glazing bar), flat 4 mm HDF panels fig. 1



» edge without rebate flat glazing bar (CPL laminate-rounded glazing bar), flat 4 mm HDF panels fig. 2




MODERNREBATED AND NON-REBATED DOOR LEAF WITH DIFFERENT HEIGHTinterior door leaf


DecorDRE-Cell 1

CPLlaminate

DecorDRE-Cell 2

elm tabacwhite mat*

ash

golden oak textured

walnutdark

texturedgray oak

textured***

bleached oak


elm





straight edge

21x16 mm 21x16 mm

flat glazing bar

flat glazing bar


fig. 1

edge without rebate

fig. 2

25x19 mm 25x19 mm

rounded glazing bar

(CPL)

rounded glazing bar

(CPL)

CPLCELL

88


211 PLUS 30 224 PLUS 30198 PLUS 30 standard height


OPTION WITHOUT ADDITIONAL CHARGE » glass pane „chinchila” or „window blind” » ventilation sleeves

OPTIONS AVAILABLE WITH EXTRA CHARGE » sglass pane MAT DRE, DECORMAT BROWN, DECORMAT GRAPHITE, (applies to door leaf)

» PLUS 20 » PLUS 40, 50, 60, 70, 80 » PLUS 30 » core made of: perforated chipboard (1983) perforated chipboard (2110 and 2240)


NOTE: Different heights are available in all models of PLUS collection.

Door leaf, dependent on selected height option- 1983 mm, 2110 mm or 2240 mm is dedicated to door frames with three hinges in corre-sponding heights.

REBATED DOOR LEAF » straight edge, flat glazing bar (CPL laminate-rounded glazing bar) flat 4 mm HDF panels fig. 1



» edge without rebate, flat glazing bar (CPL laminate-rounded gla-zing bar) flat 4 mm HDF panels fig. 2




PLUSREBATED AND NON-REBATED DOOR LEAF WITH DIFFERENT HEIGHT

interior door leaf


DecorDRE-Cell 1

CPLlaminate

DecorDRE-Cell 2

elm tabacwhite mat

ash

golden oak textured

walnutdark

texturedgray oak

textured***

bleached oak


elm





straight edge

21x16 mm 21x16 mm

flat glazing bar

flat glazing bar


fig. 1

edge witho-ut rebate

fig. 2

25x19 mm 25x19 mm

rounded glazing bar

(CPL)

rounded glazing bar

(CPL)

CPLCELL

89

CPLCELL

VETRO natura A13 - bleached oak

oak light dark walnut wengeebonybleached oak

natural veneer

90

NATURA

VETRO natura A1

VETRO natura A10

VETRO natura A5

VETRO natura A14

VETRO natura A8

VETRO natura A15

VETRO natura A9VETRO natura A2

VETRO natura A11

VETRO natura A3

VETRO natura A12

VETRO natura A4

VETRO natura A13

VETRO natura AREBATED DOOR LEAF

interior door leaf

STANDARD OPTION » frame made of MDF additionally reinforced with plywood » core made of perforated chipboard » 8 mm tempered glass » natural veneer

OPTION WITHOUT ADDITIONAL CHARGE » there is possibility to make ventilation undercut (A) » door leaf with revers positioning of glass pane » VETRO A1 four possible types of glass pane: DECORMAT, DECORMAT BROWN, DECORMAT GRAPHITE and transparent glass



NOTE: There is no possibility to shorten door leaf. It is required to use together with VETRO door leaf model door frames equipped with 3 hinges.

VETRO A - „80”-„100” - with ventilation undercut fulfill ventilation requirements.

NOTE: The specificity of natural veneer is a possibility of differences in wood grain and staining. These differences can not be the basis of the accepted complaint.


straight edge

fig. 1

edge without rebate

fig. 2

NEW NEW NEW NEW

91

CPLCELL

VETRO natura B15 - dark walnut


natural veneer

92

NATURA

VETRO natura B1

VETRO natura B10

VETRO natura B5

VETRO natura B14

VETRO natura B8

VETRO natura B15

VETRO natura B9VETRO natura B2

VETRO natura B11

VETRO natura B3

VETRO natura B12

VETRO natura B4

VETRO natura B13

VETRO natura BREBATED DOOR LEAF

interior door leaf

STANDARD OPTION » frame made of MDF additionally reinforced with plywood » core made of perforated chipboard » 8 mm tempered glass » natural veneer

OPTION WITHOUT ADDITIONAL CHARGE » there is possibility to make ventilation undercut » door leaf with revers positioning of glass pane » VETRO B1 four possible types of glass pane: DECORMAT, DECORMAT BROWN, DECORMAT GRAPHITE and transparent glass



NOTE: There is no possibility to shorten door leaf. It is required to use together with VETRO door leaf model door frames equipped with 3 hinges.

VETRO B - doesnt fulfill ventilation requirements.



straight edge

fig. 1

edge without rebate

fig. 2

NEW NEW NEW NEW

93

CPL


PREMIUM 2 natura PREMIUM 3 naturaPREMIUM natura PREMIUM 1 natura

STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » natural veneer




NOTE: There is possibility to make rebated „40” side panels. It is required to use together with PREMIUM door leaf model door frames equipped with 3 hinges. NOTE: The specificity of natural veneer is a possibility of differences in wood grain and staining. These differences can not be the basis of the accepted complaint.






PREMIUM naturaREBATED AND NON-REBATED DOOR LEAFinterior door leaf


natural veneer

straight edge

fig. 1

edge without reabte

fig. 2

NATURA

94


DOVA 2 natura DOVA 3 naturaDOVA natura DOVA 1 natura

STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » natural veneer




NOTE: There is possibility to make rebated „40” side panels. It is required to use together with DOVA door leaf model door frames equipped with 3 hinges. NOTE: The specificity of natural veneer is a possibility of differences in wood grain and staining. These differences can not be the basis of the accepted complaint.






DOVA naturaREBATED AND NON-REBATED DOOR LEAF

interior door leaf


natural veneer

straight edge

fig. 1

edge without rebate

fig. 2

NATURA

95

SCALA natura non-rebated dark walnut


natural veneer

96

NATURA

SCALA A natura SCALA A4 natura

SCALA natura

SCALA A5 naturaSCALA A1 natura SCALA A2 natura

SCALA A6 natura

SCALA A3 natura

SCALA A7 natura

STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » natural veneer » flat panels




NOTE: There is possibility to make rebated „40” side panels. It is required to use together with SCALA door leaf model door frames equipped with 3 hinges. NOTE: The specificity of natural veneer is a possibility of differences in wood grain and staining. These differences can not be the basis of the accepted complaint.NOTE: Door handle and backplate must be purchased separately.






SCALA A naturaREBATED AND NON-REBATED DOOR LEAF

interior door leaf


straight edge

fig. 1

edge without rebate

fig. 2

panel SCALA A natura

97

DUERO natura ALU 10 ebony

birch beech oakoak light walnut bolivian dark walnut wenge ebonybleached

oak walnut

natural veneer

98

NATURA

DUERO natura ALU 10

DUERO natura ALU 80

DUERO natura ALU 50

DUERO natura ALU 60

DUERO natura ALU 70

DUERO natura ALU 20

DUERO natura ALU 30

DUERO natura ALU 40

STANDARD OPTION » stiles and rails made of MDF » glass pane MAT DRE 4 mm thick » natural veneer secured with UV varnish » aluminum marquetry elements with cross-section 8X2 mm


» three hinges - applies to rebated door leaf

OPTIONS AVAILABLE WITH EXTRA CHARGE » door leaf „90” and „100” » ventilation undercut » double leaf door

In DUERO Natura ALU there is monochromatic, uniform, horizontal wood grain. NOTE: The specificity of natural veneer is a possibility of differences in wood grain and staining. These differences can not be the basis of the accepted complaint.



DUERO natura ALUREBATED DOOR LEAF

interior door leaf


straight edge

fig. 1

edge without rebate

fig. 2

99

CPLCELL

ARTE natura 50 - dark walnut

birch beech oak

oak light walnut bolivian dark walnut

wenge

ebonybleached oak

walnut

natural veneer 1

natural veneer 2

natural veneer 3

100

NATURA

ARTE natura 10 ARTE natura 50ARTE natura 20

ARTE natura 70

ARTE natura 30

ARTE natura 80

ARTE natura 40

ARTE natura 90

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb” » natural veneer secured with UV varnish » glass pane white bark 4 mm thick



» ARTE natura 10-30, 90 ARTE natura 70 ARTE natura 40, 50 ARTE natura 80

» core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door


REBATED DOOR LEAF » straight edge, rounded glazing bar, fig. 1 » 2 silver screw-in pivot hinges » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock


ARTE naturaREBATED DOOR LEAF

interior door leaf


straight edge

fig. 1

25x16 mm

25x16 mm

rounded glazing bar

rounded glazing bar

edge without rebate

fig. 2

101

STANDARD natura 10

STANDARDnatura 30s

STANDARD natura 40

STANDARD natura 20

STANDARDnatura 20s

STANDARD natura 30

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb” » natural veneer secured with UV varnish » glass pane white bark 4 mm thick





STANDARD naturaREBATED DOOR LEAFinterior door leaf


birch beech oak wengewalnut

natural veneer 1

oak light walnut bolivian dark walnut ebonybleached

oak

natural veneer 2

straight edge

fig. 1

25x16 mm

25x16 mm

rounded glazing bar

rounded glazing bar

edge without rebate

fig. 2

NATURA

102

STANDARD natura 40s

BULAJ natura MDF

BULAJ natura stalowy

STANDARD natura 50

STANDARDnatura 50s

STANDARD natura 60


» STANDARD natura 20, 20s, 40, 40s, BULAJ natura MDF STANDARD natura 30, 30s STANDARD natura 50, 50s STANDARD natura 60

» core made of perforated chipboard » door leaf „90” and „100” » rebated door leaf „110” (only STANDARD 10) » ventilation undercut » additional upper single point mortise lock ( available only in STAN-DARD 10 door leaf model with core made of perforated chipboard and fixed door frame )

» plastic ventilation grille » aluminum ventilation grille » double leaf door » there is possibility to purchase BULAJ separately

STANDARD naturaREBATED DOOR LEAF

interior door leaf


natural veneer 1birch beech oak wengewalnut

oak light walnut bolivian dark walnut ebonybleached

oak

natural veneer 2

steel BULAJ(available only MAT or transparent

glass pane)

(A)

Additionall upper single point mortise lock ( available only in

STANDARD natura 10 door leaf model with core made of

perforated chipboard and fixed door frame )

NATURA

103

GALERIAnatura 02

GALERIAnatura 10

GALERIAnatura 20

GALERIAnatura 50

STANDARD OPTION » door leaf frame made of softwood » core made of perforated chipboard » natural veneer secured with UV varnish » glass pane MAT DRE 4 mm thick ( in models 11, 12, 21, 22, 23, 51)

OPTION WITHOUT ADDITIONAL CHARGE » glass pane decormat brown or „window blind” » ventilation sleeves » three hinges - applies to rebated door leaf

OPTIONS AVAILABLE WITH EXTRA CHARGE » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door



GALERIA naturaREBATED DOOR LEAFinterior door leaf



oak walnut

natural veneer

straight edge

fig. 1

25x16 mm

25x16 mm

rounded glazing bar

rounded glazing bar

edge without rebate

fig. 2

NATURA

104

GALERIAnatura 22

GALERIAnatura 23

GALERIAnatura 51

GALERIAnatura 11

GALERIAnatura 12

GALERIAnatura 21

GALERIA Natura Alu passive door leaf 20, 21, 22, 23, are made without horizontal marquetries, and they are coated with uniform wood grain.In sliding version of double leaf door GALERIA natura 20, 21, 22, 23, there might be noted differences in the relative positions of horizontal stripes at the corresponding heights of the leaf .Door leaf coated with dark natural veneer have stripes in birch colour.Door leaf coated with light natural veneer have stripes in wenge colour.


GALERIA naturaREBATED DOOR LEAF

interior door leaf



oak walnut

natural veneer

NATURA

105

GALERIA natura ALU 10







STANDARD OPTION » door leaf frame made of softwood » core made of perforated chipboard » natural veneer secured with UV varnish » aluminum marquetry elements with cross-section 8X2 mm » glass pane MAT DRE 4 mm thick ( in models 11-13 and 21-25)

OPTION WITHOUT ADDITIONAL CHARGE » glass pane decormat brown or „window blind” » ventilation sleeves » three hinges - applies to rebated door leaf

OPTIONS AVAILABLE WITH EXTRA CHARGE » door leaf „90” and „100” » ventilation undercut » double leaf door



GALERIA natura ALUREBATED DOOR LEAFinterior door leaf



oak walnut

natural veneer

straight edge

fig. 1

25x16 mm

25x16 mm

rounded glazing bar

rounded glazing bar

edge without rebate

fig. 2

NATURA

106







Passive door leaf GALERIA NATURA ALU are coated with venner in uniform, monochromatic wood grain.GALERIA Natura Alu passive door leaf 20, 21, 22, 23, 24, 25 and 60 are made without horizontal marquetries, and they are coated with uniform wood grain.In sliding version of double leaf door GALERIA natura 20, 21, 22, 23, 24, 25 and 60 there might be noted differences in the relative positions of horizontal stripes at the corresponding heights of the leaf .


GALERIA natura ALUREBATED DOOR LEAF

interior door leaf


brch beech oaklight oak walnut bolivian dark walnut wenge ebonybleached

oak walnut

natural veneer

NATURA

107

GALERIA natura 02

GALERIA natura 10

GALERIA natura 20

GALERIA natura 50

STANDARD OPTION » door leaf frame made of softwood » core made of perforated chipboard » natural veneer secured with UV varnish

OPTION WITHOUT ADDITIONAL CHARGE » ventilation sleeves

OPTIONS AVAILABLE WITH EXTRA CHARGE » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door » cover-up strip for double leaf non-rebated door

Passive door leaf GALERIA Natura 20 ,are made without horizontal marquetries, and they are coated with uniform wood grain.

Door leaf coated with dark natural veneer have stripes in birch colour.Door leaf coated with light natural veneer have stripes in wenge colour.





GALERIA naturaNON-REBATED DOOR LEAFinterior door leaf


oakoak light dark walnut wenge ebonybleached oak walnut

natural veneer

edge without rebate

fig. 1

NATURA

108

STANDARD natura 10

BULAJ natura MDF

steel BULAJ natura

STANDARD OPTION » door leaf frame made of softwood » core made of perforated chipboard » natural veneer secured with UV varnish

OPTION WITHOUT ADDITIONAL CHARGE » glass pane „chinchila „window blind” » ventilation sleeves


» BULAJ natura MDF » core made of perforated chipboard » door leaf „90” and „100” » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » double leaf door » cover-up strip for double leaf non-rebated door » there is possibility to purchase BULAJ separately





STANDARD naturaNON-REBATED DOOR LEAF

interior door leaf


natural veneer 1

natural veneer 2

oak

oak light dark walnut

wenge

ebonybleached oak

walnutbirch beech

walnut bolivian

edge without rebate

fig. 1

steel BULAJ(available only MAT or transparent

glass pane)

NATURA

109

GALERIA natura ALU 50 dark walnut non-rebated

oakoak light dark walnut wenge ebonybleached oak walnut

natural veneer

110

NATURA






STANDARD OPTION » door leaf frame made of softwood » core made of perforated chipboard » natural veneer secured with UV varnish » aluminum marquetry elements with cross-section 8X2 mm

OPTION WITHOUT ADDITIONAL CHARGE » ventilation sleeves

OPTIONS AVAILABLE WITH EXTRA CHARGE » door leaf „90” and „100” » ventilation undercut » double leaf door » cover-up strip for double leaf non-rebated door

In GALERIA Natura ALU there is monochromatic, uniform wood grain.

GALERIA Natura Alu passive door leaf 20 and 60 are made without horizontal aluminum marquetries elements, and they are coated with uniform wood grain.





GALERIA natura ALUNON-REBATED DOOR LEAF

interior door leaf


edge without rebate

fig. 1

111

folding doors FOLDE 10 - white mat


american ebony

elm tabacwhite mat

ash

golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm



elmanthracite

wengedark


silver

Decor DRE-Cell 1

Decor DRE-Cell 2

Decor 3D

112

113

FOLDING DOORS FOLDEinterior door leaf

CELL 3D

80

Cross-section of folding doors in opened position*

Cross-section of folding doors in closed position (right doors, left doors it is mirror reflection)

Vertical cross-section

* NOTE:When door leaves are fully opened, the door fittings slightly reduce the clear opening by approx. 10 cm.(this value doesnt take into account door handle)

STANDARD OPTION » door leaf frame made of softwood » core made of perforated chipboard » straight edge fig. 1 » single-point mortise lock for simple key, for bathroom lock, for cylinder lock or economic lock

» 3 hidden concealed ISTAR hinges instaled between two-element door leaf unit

OPTIONS AVAILABLE WITH EXTRA CHARGE » core made of perforated chipboard » door leaf „90” and „100”

straight edge

fig. 1

S A B C D E

„80” 844 806 830 850 880 990

„90” 944 906 930 950 980 1090

„100” 1044 1006 1030 1050 1080 1190

D - required width of wall openingNOTE: There is no possibility to shorten door leaf.

System of folding doors is characterized by that , during opening process of door leaf unit, doors fold into position parallel to each otherThe complete set of folding doors comprises:

» two-element door leaf interconnected by 3 hidden concealed hinges » adjustable door frame for folding doors

Dimensions

Door leaf width: single leaf door „80”÷”100”Technical informations:pp. 162-164, accessories: pp.140-147

NEW

wall wall wall wall

wall

floor

min

207

3 (re

quire

d he

ihgt

of w

all p

assa

ge)

Available glass doors models pp. 133-137

GOSSA 4 - sliding system glass doors

114

GLASS

Sliding system for glass doors „Spazio”, is made of anodized aluminum, and used as a complete and complementary solution together with finished door frame. Whole set comprises of - guide channel with straight or oval blende, hardware designed to hang sliding glass pane and bottom door guide. There is two options of Spazio System (only difference is the shape of external blende) :

» Spazio TP – with straight blende » Spazio TO – with oval blende

SLIDING SYSTEM GLASS DOORS

S A P

„60” 630 590 1340

„70” 730 690 1540

„80” 830 790 1740

„90” 930 890 1940

Dimensions

Door leaf width: single leaf door „60”÷”90”Technical informations:pp. 138

PRICE » Price of sliding system for glass doors

To complete the whole system it is reccomended to buy glass door leaf in sliding sys-tem version from our collections: Galla, Gracca or Gossa. There is designed for this solution round door handle. OPTIONS AVAILABLE WITH EXTRA CHARGE » door handle (two-sided)

sliding glass door leaf

NEW

S - width of door leafA - width of wall passageP - length of guide channel

NOTE: there is no possibility to make ventilation options.

door handle (stainless steel)

A-A vertical cross-sectionof Spazio TP

A-A vertical cross-sectionof Spazio TO

floorfloor

115

DecorDRE-Cell


american ebony

elm tabac

white mat*

primed

ash

golden oak textured

walnutdark

texturedgray oak

textured***

bleached oak


elmwhite

(structure) alderbeech calvados

walnut

dark cherry

walnut satin

golden oak

Decor3D

Decor

elmanthracite wenge dark

SARA eco

116

117

SARA ECONON-REBATED DOOR LEAF - OPENED OUTWARDS

interior door leafSARA ECO

Dimensions of Sara Eco door leaf

S A B C D

„80” 844 829 850 914 924

„90” 944 929 950 1014 1024

NON-REBATED DOOR LEAF - OPENED OUTWARDSSara Eco door leaf is an innovative solution for creative interior design with the use of “invisible” doors. This unique construction gives possibility to finish surface of door leaf in the colours of the walls.

CONSTRUCTION OF SARA ECO DOOR LEAF COMPRISES OF:Aluminum door frame, „invisible” after assembly process, build in the wall or overlayed with sheets of plasterboard. After detalling process, only visible part is rebate of the door frame, prepared for future painting, e.g. in the colour of the walls.Non-rebated panel door leaf is available in two finishing options:

» wide surfaces of door leaf are primed and ready for painting or paperhanging (e.g. in the colour of the walls). Edges of the leaf are covered with a paintable edge band. Painting is to be done at one-s own discretion.

» wide surfaces of door leaf are coated with veneer from DRE-Cell or 3D group, while the edges of the leaf are covered with a edge band in the colour of the veneer.

OPTIONS AVAILABLE WITH EXTRA CHARGE WITH PRIMER » ventilation undercut

STANDARD OPTION » door leaf frame made of softwood » sockets for 2 hidden concealed ISTAR hinges » core made of „honeycomb” » magnetic lock for simple key, for bathroom lock, for cylinder lock or economic lock

OPTIONS AVAILABLE WITH EXTRA CHARGE IN DRE-CELL AND 3D » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » dropping seal » Price of door frame includes two hidden concealed hinges.

detailing proces or Gypsum board

180° left openingdoor leaf

detailing proces or Gypsum board

Sara Eco horizontal cross-section

Sara Eco horizontal cross-section (assembly in Gypsum wall)

door frame profile

door frame profile with gasket

180° right opening

Sara Eco vertical cross-section20

44 -

door

fram

e pa

ssag

e he

ight

floor

A

SBCD

2043

- do

or le

af h

eigh

t

2086

- to

tal h

eigh

t doo

r fra

me

2094

- re

quire

d he

ight

of w

all p

assa

ge

Door leaf width: single leaf door „80”÷”90”,Technical informations: accessories: pp.125, 140-147 and 161, door leaf: 162-170

S - width of door leaf unitA - width of passage in door frame unitB - width in rebate of door frameC - external width of door frameD - required width of wall passage

NOTE: Minimum thickness of the wall 75 mm

118

SARA ECOSARA ECOREBATED DOOR LEAF - OPENED INWARDS

Sara Eco door leaf is an innovative solution for creative interior design with the use of “invisible” doors. This unique construction gives possibility to finish surface of door leaf in the colours of the walls.

CONSTRUCTION OF SARA ECO DOOR LEAF COMPRISES OF:Aluminum door frame, „invisible” after assembly process, build in the wall or overlayed with sheets of plasterboard. After detalling process, only visible part is rebate of the door frame, prepared for future painting, e.g. in the colour of the walls.Rebated panel door leaf is available in two finishing options:

» wide surfaces of door leaf are primed and ready for painting or paperhanging (e.g. in the colour of the walls). Edges of the leaf are covered with a paintable edge band. Painting is to be done at one-s own discretion.

» wide surfaces of door leaf are coated with veneer from DRE-Cell or 3D group, while the edges of the leaf are covered with a edge band in the colour of the veneer.

REBATED DOOR LEAF -OPENED INWARDS

Price of door frame includes two hidden concealed hinges.OPTIONS AVAILABLE WITH EXTRA CHARGE WITH PRIMER » ventilation undercut

STANDARD OPTION » door leaf frame made of softwood » sockets for 2 hidden concealed ISTAR hinges » core made of „honeycomb” » magnetic lock for simple key, for bathroom lock, for cylinder lock or economic lock

OPTIONS AVAILABLE WITH EXTRA CHARGE IN DRE-CELL AND 3D » ventilation undercut » plastic ventilation grille » aluminum ventilation grille » dropping seal

Dimensions of Sara Eco door leaf

S A B C D

„80” 844 829 850 914 924

„90” 944 929 950 1014 1024

S - width of door leaf unitA - width of passage in door frame unitB -width in rebate of door frameC -external width of door frameD - required width of wall passage

NOTE: Minimum thickness of the wall 75mmDoor leaf width: single leaf door „80”÷”90”,

Technical informations: accessories: pp.125, 140-147 and 161, door leaf: 162-170

90° right opening

floor

detailing procesor Gypsum board


2043

- do

or le

af h

eigh

t

2044

- do

or fr

ame

pass

age

heig

ht

2086

- to

tal h

eigh

t doo

r fra

me

2094

- re

quire

d he

ight

of w

all p

assa

ge



Sara Eco horizontal cross-section (assembly in Gypsum wall)

90° left opening

Sara Eco horizontal corss-section Sara Eco vertical cross-section

door frame profile with gasket

door frame profile

door leaf

DCA

S

B

119

ENTER NATURAREBATED DOOR LEAFinterior entrance door leaf

dropping seal Digital viewfinder DDS1 (separately) Digital viewfinder DDS2 (separately)


» core made of perforated chipboard » external flat HDF board » 3 silver screw-in pivot hinges » straight edge fig. 1 » bottom deadbolt lock adapted for door lock cylinder » upper deadbolt lock adapted for door lock cylinder

APPLICATIONDoor leaf ENTER and SOLID can be used as internal entrance door in multifamily buildings and in public utility buildings.

NOTE: The specificity of natural veneer is a possibility of differences in wood grain and staining. These differences can not be the basis of the accepted complaint.OPTIONS AVAILABLE WITH EXTRA CHARGE » viewfinder – included separately » digital viewfinder DDS1 - included separately » digital viewfinder DDS2 - included separately » stainless steel threshold - 70mm wide » cancellation of second lock » dropping seal

Door leaf width: single leaf door „80”÷”100”Technical informations: door frames: pp. 152-158, door leaf: 162-170

cross-section of ENTER natura

(B) flat metal bar

(A) MDF board

Upper deadbolt lockViewfinder(separately)

Steel threshold(70 mm wide)

ENTER natura 0

DOOR LEAF CONSTRUCTIONConstruction door leaf frame is made of MDF board, additionally reinforced with two flat metal bars (B). Core is made of perforated chipboard (C). Door leaf unit, as a set together with fixed door frame Soft natura and dropping seal, has increased acustic insulation (Rw=32dB), or as a set together with fixed door frame Soft natura and metal threshold, or as a set together with metal door frame and dropping seal or metal threshold, has incre-ased acustic insulation (Rw=27dB). External HDF board is ennobled with natural veneer secured with UV varnish.

It is reccomended to use together with door leaf collection ENTER natura fixed door frame Soft natura.

(C) perforated chipboard

NATURA

birch beech oak

light oak walnut bolivian dark walnut

wenge

ebonybleached oak

walnut

natural veneer1

natural veneer 2

natural veneer 3

staright edge

fig. 1

120

NAZWASKRZYDŁA DRZWIOWE PRZYLGOWE I BEZPRZYLGOWEwewnętrzne wewnątrzlokalowe

DRE sliding system is designed to be used together in one set with single or double leaf interior door, which are available in our sale offer in sli-ding version. Sliding system is available in veneer colours which constitute standard finishing colours of door leaf unit: DRE-Cell, 3D foil, natural veneers and painted doors with the exception of the following collections: ENTER, ENTER natura, SOLID, VETRO C , VETRO F, LACK, ASCADA, SINCO, IVI, DUO, RIM, fire resistance doors and door with different heights.

In our sale offer there are available two different types of sliding system:NS - sliding system mounted directly on the wallNT- sliding system mounted together with adjustable tunnel (adjustable tunnel with angular element T80 is not available in this option)

The set of sliding system NS comprises of: sliding guide bar with hardware (LEON SN 150, 180, 200) , spacing board, masking strip and fender beam (fender beam is available for single leaf - for doors with hook lock option in fender beam there is made milling for latch).In the system mounted with adjustable tunnel - NT, set contains 2 additional 16 mm spacing boards. There are differences in cross-sections of NS and NT masking strips.

To complete entire set of sliding doors it is necessary to purchase sliding leaf unit in following dimensions:Single leaf door: „60”, „70”, „80”, „90”, „100”Double leaf door:„2x60”, „2x70”, „2x80”, „2x90”, „2x100”

Door leaf might be equipped with sockets for lock and/or handle - those accessories must be purchased separately.In the system mounted with adjustable tunnel - NT, it is necesssary to purchase adjustable tunnel with angular element K63 or N63 separately.

PIANO american walnut

121

SLIDING SYSTEMon-wall mounted

ACCESSORIES » Round handle1 pcs. » Oval handle 1 pcs. » Hook lock with two round or oval handles

One set of door handle for single door leaf consist of 2 pcs.

hook lock with round handle

hook lock with oval handle

Height of sliding door leaf unit- 2043 mmtotal height of sliding system - 2154 mm

* is not available in double system

floor floor

wallwall

wall wall

wall wall

Dimension Masking strip Guide bardoor leaf

[mm] Mz Mw Pa

644, 744 1602 1570 1500844 1902 1870 1800944 2102 2070 2000

1044 2150 2118 2000

symbol „60” „70” „80” „90” „100”A 600 700 800 900 1000C 644 744 844 944 1044D 664 764 864 964 1064E 750 850 950 1050 1150S 644 744 844 944 1044

symbol „120” „140” „160” „180” „200”A 1200 1400 1600 1800 2000C 1244 1444 1644 1844 2044D 1264 1464 1664 1864 2064E 1350 1550 1750 1950 2150

S** 644 744 844 944 1044

S** width of one door leaf

Single

Double sliding system

Technical informations: adjustable tunnel pp. 159, door leaf: 162-170

NS - horizontal cross-section (left system) NT - horizontal cross-section (left system)

NS - vertical cross-section NT - vertical cross-section

masking strip with guide bar

Dimension Masking strip Guide bardoor leaf

[mm] Mz Mw Pa

2 x 644 2 x 1519 2 x 1503 2 x 15002 x 744 2 x 1519 2 x 1503 2 x 15002 x 844 2 x 1819 2 x 1803 2 x 18002 x 944 2 x 2019 2 x 2003 2 x 2000

2 x 1044 2 x 2063 2 x 2047 2 x 2000

Single sliding system

Double sliding system

NOTE: In double sliding system masking strip is connected on lenght, by two single elements.

gold

oval handle

round handle

gold satin chrome chromesatin

hook lock(gold, gold satin, chrome, chrome satin)

Masking strip and guide bar for double sliding system is made by connecting two elements of single system.

DecorDRE-Cell 1


american ebony

elm tabacwhite mat*

ash

golden oak textured

walnutdark

texturedgray oak

textured***

bleached oak


elm


Decor3D

DecorDRE Cell 2


CPL laminate**



SIDE PANELSREBATED

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb” » glass pane 4 mm thick white bark, „window blind” , CHINCHILA, MAT DRE, DECORMAT BROWN or DECORMAT GRAPHITE

» 2 silver screw-in pivot hinges » latch strike plate and two flush bolts » optional: straight edge, flat glazing bar fig. 1 or „karnies” edge, rounded glazing bar fig. 2

OPTION WITHOUT ADDITIONAL CHARGE » three hinges

OPTIONS AVAILABLE WITH EXTRA CHARGE » core made of perforated chipboard » door frame for door leaf with side panel +30%

Side panel it is passive rebated door leaf unit with „40” width and 40 mm thick, with glazing or without glazing option, in uniform wood grain. Side panels can be paired with interior, rebated door leaf in the following combination: „60+40”; „70+40”; „80+40”; „90+40”; „100+40”.Side panel 10 can be applied to rebated interior door leaf. .Side panel 30 can be applied to models ARTE 10-30 and STANDARD 30.Side panel 40 can be applied to models ARTE 40, 50, 70, 90; STANDARD 40, KANON 30, and collection DECO.Side panel 41 can be applied to models MODERN 30, IDEA 30, PLUS 30. To make the best possible match of side panel to door leaf unit, besides selection of model, it is necessary to choose wright colour, type of the edge and number of hinges.

NOTE: There is no possibility to shorten side panels.

straight edge

21x16 mm

flat glazingbar

fig. 1

„karnies”edge

25x16 mm

rounded glazing bar

fig. 2

3D CPLCELL

Side panel 10 Side panel 40 Side panel 41Side panel 30

Side panels width: „40”Technical informations: door frames: pp. 152-158, door leaf: 162-170

* veneer is not available with „karnies“ edge** available only straight edge*** decor available only in horizontal wood grain

122

oak

oak light dark walnut

wenge

ebonybleached oak

walnutbirch beech

walnut bolivian

SIDE PANELS NATURAREBATED

STANDARD OPTION » door leaf frame made of softwood » core made of „honeycomb” » glass pane 4 mm thick white bark, „window blind” , CHINCHILA, MAT DRE, DECORMAT BROWN or DECORMAT GRAPHITE

» 2 silver screw-in pivot hinges » latch strike plate and two flush bolts » straight edge fig. 1

„80+40”; „90+40”; „100+40”. Side panel it is passive rebated door leaf unit with „40” width and 40 mm thick, with glazing or without glazing option, in uniform wood grain. Side panel Natura 10 can be applied to all collections with natural veneer and with straight edge, besides ENTER natura. Side panel Natura 02 can be applied to collection Galeria Natura 02, 20, 21, 22, 23, Galeria Natura ALU 20,21,22,23, 24, 25 and Duero Natura ALU.Side panel Natura 30 can be applied to models ARTE natura 10-30, STANDARD natura 30 with straight edge.Side panel Natura 40 can be applied to models ARTE natura 40, 50, 70, 90, STANDARD natura 40.NOTE: There is no possibility to shorten side panels.


OPTIONS AVAILABLE WITH EXTRA CHARGE » core made of perforated chipboard » door frame for door leaf with side panel +30%

Single rebated interior door leaf unit can be paired together with side panel with „40” width in the following combinations: 60+40”; „70+40”;

straight edge

fig. 1

25x16 mm

rounded glazing bar

Side panel Natura 10(horizontal wood

grain, straight edge)

Side panel Natura 30(vertical wood grain,

straight edge)

Side panel Natura 40(vertical wood grain,

straight edge)

Side panel Natura 02(horizontal wood

grain, straight edge)

Side panels width: „40”Technical informations: door frames: pp. 152-158, door leaf: 162-170

* veneer is not available with „karnies“ edge** available only straight edge*** decor available only in horizontal wood grain

natural veneer 1

natural veneer 2

123

124


american ebony

elm tabacwhite mat ash golden oak textured

walnut dark

texturedgray oak

textured***

bleached oak


elmwhite

(structure)elm

anthracite

wenge dark

vanilla***

wenge textured***

DecorDRE-Cell

Decor 3D



SIDE PANELSREBATED

Side panelPREMIUM

(straight edge)

DRE-Cell foil 3D

Side panelPIANO(straight

edge)DRE-Cell foil 3D

Side panelFOSCA(straight


Side panelSCALA A(straight


Side panelSCALA B(straight


Side panelELSA

(straight edge)

DRE-Cell foil 3D

Side panelAURI

(straight edge)

DRE-Cell foil 3D

3D NATURA

Side panelPREMIUM natura

(straight edge)Natura

Side panelDOVA natura(straight edge)

Natura

Side panelSCALA natura(straight edge)

Natura

STANDARD OPTION » door leaf frame made of MDF » glass pane 4 mm thick, MAT DRE, DECORMAT BROWN or DE-CORMAT GRAPHITE or transparent glass pane

» 3 silver screw-in pivot hinges » latch strike plate and two flush bolts » straight edge fig. 1


NOTE: Price of side panel is equal to the price of corresponding door leaf model.

There is possibility to make side panels to all frame construction door leaf, available in presented collections, in following combinations: „60+40”; „70+40”; „80+40”; „90+40”; „100+40”

NOTE: There is no possibility to shorten side panels.

Technical informations: door frames: pp. 152-158, door leaf: 162-170

natural veneer

straight edge

fig. 1

125

ACCESSORIES

self closer DORMA self closer GEZE PRESTIGE door handle and backplate for FORCA 10 - pp. 132

DIGITAL VIEWFINDER AXA DDS1 DIGITAL VIEWFINDER AXA DDS2

PATENTED CYLINDERS

SELF CLOSER

patented cylinder 26/41 - nickel mat

patented cylinder 26/41 - brass satin

set of patented cylinder ZN 30/40+30G/40 SN

or ZN 30/40+40G/30 SN nickel satin

set of patented cylinder ZN 30/40+30G/40 SB

or ZN 30/40+40G/30 SB brass satin

single key system

126

TRANSOMS

Possible configuration of transom lights/side lights

127

TRANSOMS

Transom lights/ sidelights are fixed, unopenable, glazed partitions between rooms or spaces that may constitute an independent structure or asupplement for interior doors (except for glass doors) with a fixed door frames. Transom lights/ sidelights are manufactured and delivered as a setof components ready for assembly. Set contains the following:• two horizontal and two vertical main beams• set of cover and installation strips• set of gaskets• main beam couplers

Transom lights/ sidelights are used in interior doors with a fixed door frames and they come in the following decors DRE-Cell, 3D veneer, Finish veneer and CPL laminate 0.15-0.2 mm.

NOTE: Our product does not come with the glass pane, which should be purchased by the Client separately. We recommend using tempered glass pane with a thickness of 4 mm. Assembly of transom lights/ sidelights should be performed once the „wet” construction works are completed.

transom light transom light

side light

transon/side light beam

mounting strip

masking strip gasket

glazing chanel

Fig. A cross-section of the transom light/sidelight

Dimensions of transom lights/sidelights

range of products totalheight

totalwidth

lenght of theperimeter

small window 2073 mm Z 2*2073+2*Z

sidelight N Z 2*N+2*Z

transom light N B 2*N+2*B

Available variants of transom lights height„N” = 300; 400; 500; 600; 700; 800 [w mm].The available variations of the width of transom and side lights„Z” = 300; 400; 500; 600; 700; 800; 900; 1000 [in mm].Width of the upper „B” transom lights is adjustedto the width of the fixed door frames; the availablevariants of the widths can be found in the following tables:

The transom lights are mounted on the single-leaf door frame

„60” „70” „80” „90” „100” „110”

B 688 788 888 988 1088 1188

Price of the transom lights/ sidelights is calculated per one meter of circumference measured on the outer side of the transom lights/sidelights.

If you wish to place an order, please contact Customer Service Department.

NOTE: height of the sidelight is adapted to the standard height of the fixed door frame. Therefore, we do not recommendshortening the door frame in configuration with the sidelight.

Transoms mounted with the door frame in double-leaf doors

„100d” „110d” „120” „130” „140” „150” „160” „170” „180” „190” „200”

B 1123 1223 1323 1423 1523 1623 1723 1823 1923 2023 2123

128

FIRE-RESISTANCE DOORS OLIMPREBATED DOOR LEAFinterior entrance fire - resistance door leaf HALSPAN system

OLIMP 20OLIMP 10 OLIMP 30 OLIMP 40

STANDARD OPTION » core made ofHalspan chipboard 44 mm in EI30 or 54 mm in EI60 with additional pine wood strips attached circumferen-tially

» straight edge, rounded glazing bar fig. 1 » transparent fire-resistnace glass pane (variable width depen-dent upon the size of the door leaf)

» intumescent smoke-proof gaskets » 4 screw-in pivot hinges » patented cylinder lock » dropping seal

OPTIONS AVAILABLE WITH EXTRA CHARGE » viewfinder » self closer DORMA » self closer GEZE » fire resistance ventilation grille » surcharge for inactive door leaf

APPLICATIONFire-resistance doors are used as interior entrance doors in residentialhousing, public utility buildings and collective residential buildings. In order to comply with the conditions of the TECHNICAL APPROVAL,self closers should be applied in doors with fire-resistance EI 30 and EI60.Doors are sold only as a set with a metal fire-resistance door frameor a wooden fire-resistance door frame.

SELF CLOSER DORMA SELF CLOSER GEZE

Acoustic sound insulation rate for single leaf door Rw = 32 dBAcoustic sound insulation rate for double leaf door Rw = 27 dB


Door leaf width: single leaf door „80”÷”110”, rebated double leaf door „160” ÷ „200”,Technical informations: door frames: pp. 129-130, door leaf: 162-170

fire resistance ventilation grille

FIRE RESISTANT

ashwhite(structure) alderbeech calvados

walnut

darkcherry

walnutsatin

golden oak

Decor DRE-Cell 1 white mat

chestnutacacia honey oak

CPLlaminate

elm tabac

golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm

elmanthracite

wengedark

oak welshoak gray walnut walnutcelini

straight edge

fig. 1

22x28 mm

rounded glazing bar

129

WOODEN FIRE-RESISTANCE DOOR FRAME

Cross-section of fire-resistancewooden door frame for OLIMP door leaf

EI30

EI60

Vertical cross-section of fire resistance door leaf

required height of the opening in the wall 2101 mm

Horizontal cross-section ofdoor frame in the wall

D - required width of the opening in the wall

for single-leaf doorsA B C D

80 804 828 912 95290 904 928 1012 1052100 1004 1028 1112 1152110 1104 1128 1212 1252

for double-leaf doorsA B C D

160 1635 1659 1743 1783170 1735 1759 1843 1883180 1835 1859 1943 1983190 1935 1959 2043 2083200 2035 2059 2143 2183

CONSTRUCTIONFixed wooden door frame with cross-section 54x100 mm is made ofconiferous wood coated in door leaf unit colour with a DRE-Cell veneer or 0.2 mm CPL laminate.

APPLICATIONDoor frame is applied to the interior entrance fire-resistance doors OLIMPEI30 and EI60.

STANDARD OPTIONEI30, EI60 door frame

» 4 hinges » gasket with enhanced flame-resistance properties » latch strike plate » set of assembly accesories

EI60 door frame » 2 intumescent seals mounted in the channels of door frame rebate

wall wall

wall

floor

130

require height of the wall passage 2084 mm

vertical cross-section

wall

�oor

wall wall

horizontal cross-section

D - required width of the wall passage

metal door frame cross-section

* for EI-30 - rebate 40 mm for EI-60 - rebate 50 mm

METAL FIRE-RESISTANCE DOOR FRAME

A B C D„80” 800 826 896 916„90” 900 926 996 1016„100” 1000 1026 1096 1116„110” 1100 1126 1196 1216

A B C D„160” 1635 1661 1731 1751„170” 1735 1761 1831 1851„180” 1835 1861 1931 1951„190” 1935 1961 2031 2051„200” 2035 2061 2131 2151„210” 2135 2161 2231 2251„220” 2235 2261 2331 2351

Concerns single leaf doors

Concerns double leaf doors

CONSTRUCTIONMetal door frame is made of carbon steel construction plate with a minimum thickness1.5 mm; structure is welded and powder-coated in brown or white colour.

APPLICATIONDoor frame is applied to interior entrance fire-resistance door leaf OLIMP EI30 and EI60.STANDARD OPTION » 4 screw-in pivot hinges » gasket with enhanced flame-resistance properties

Manufactured in accordance with Technical Approval ITB AT-15-7506/2010

Price ofdouble door leaf

Price of theactive door leaf

Price of the passive door leaf (active door leaf + additional

charge)

Price of the fire resistance metal door

frame

Price of the active door leaf

Price of the fire resistance metal

door frame

Price of singledoor leaf

131

FIRE-RESISTANCE DOORS ATHOSREBATED DOOR LEAF

ATHOS 10

A B C D

„80” 800 824 908 948„90” 900 924 1008 1048

„100” 1000 1024 1108 1148D - required width in wall passage

wooden door frame - front wiev cross-section of a wooden door framefor FORCA leaves

Horizontal cross-section of a door frame in the wall

vertical cross-section ATHOS doors

2105

(req

uire

hei

ght o

f the

wal

l pas

sage

floor

wall

ATHOS TECHNICAL DOORS MEET THE FOLLOWING REQUIREMENTS: » fire resistance class EI30 » smoke tightness class: Sa, Sm » mechanical resistance class: 4 » sound insulation class: RW=32

APPLICATIONInterior entrance fire-resistance doors, are used in residential housing, public utility buildings and collec-tive residential buildings, as well as commercial and technical premises. Doors are sold only as a complete set with a wooden door frame and wooden threshold.STANDARD OPTION » door leaf frame made of soft wood » core made of chipboard » straight edge » single-point mortise lock adapted for cylinder lock » 3 screw-in pivot hinges

OPTIONS AVAILABLE WITH EXTRA CHARGE » self closer DORMA » self closer GEZE » door leaf „100”

In order to comply with the conditions of TECHNICAL APPROVAL, doors with fire resistance of EI 30 should be equipped with a self closer.

Door leaf width: single leaf door „80”÷”110”Technical informations: accessories: pp. 125, door leaf: 162-170

CELL 3D CPL FIRE RESISTANT SMOKEPROOF

ashwhite(structure) alderbeech calvados

walnut

darkcherry

walnutsatin

golden oak

Decor DRE-Cell

white mat

elm tabac

golden oaktextured

walnut dark

texturedgray oak

textured***

bleached oak


elm

elmanthracite

wengedark

CPLlaminate






132

CELL 3D CPL FIRE RESISTANT SMOKEPROOF

FORCAANTI-BURGLAR, FIRE_RESISTANCE, REBATED DOOR LEAFinterior entrance door leaf

wooden door frame - front view vertical cross section Forca doors cross-section of a wooden door frameof a lintel for FORCA leaves

Horizontal cross-section of a door frame in the wall

A B C D

„80” 800 824 908 948

„90” 900 924 1008 1048

„100” 1000 1024 1108 1148D - required width of opening in the wallfloor

wal

l

wall

wal

l

FORCA 10

Door leaf width: single leaf door „80”÷”110”Technical informations: accessories: pp. 125, door leaf: 162-170

FORCA TECHNICAL DOORS MEET THE FOLLO-WING REQUIREMENTS: » anti-burglary class RC3 (according to PN-EN 1627:2012) Class C (in accordance with PN-B-92270:1999)

» fire resistance class EI30 » smoke tightness class: Sa, Sm » mechanical resistance class: 4 » sound insulation class: RW=37 dB

APPLICATIONInterior entrance fire-resistance and anti-burglary doors, are used in residential housing, public utility buildings and collective residential buildings, as well as commercial and technical premises. Doors are sold only as a complete set with a wooden door frame, wooden threshold, backplate, and two patented cylin-der inserts.

STANDRAD OPTION » door leaf frame made of soft wood » core made of chipboard » straight edge » steel strings » 5-point mortise lock » 3 screw-in pivot hinges

OPTIONS AVAILABLE WITH EXTRA CHARGE » self closer DORMA » self closer GEZE » door leaf „100”


DecorDRE-Cell


american ebonyelm tabac

ash golden oak textured

walnutdark

texturedgray oak

textured***

white(structure) alderbeech calvados

walnut walnut satin

golden oak

decor3Delm


white matbleached

oaktexturedoak Sandwhite pine siberian

elm dark cherry

CPLlaminate

In order to comply with the conditions of TECHNICAL APPROVAL, doors with fire resistance of EI 30 and anti-burglar properties, should be equipped with a self closer and a PRESTIGE handle with backplate. Picture of handle and backplate available on page 125.



2105

(req

uire

hei

ght o

f the

wal

l pas

sage

133

GALLAglass interior door leaf

GLASS

OPTIONS AVAILABLE WITH EXTRA CHARGE » ventilation undercut available in swing door leaf (door leaf „80” and „90” meet ventilation requirements)

GALLA 1decormat

GALLA 1decormat brown

GALLA 1decormat graphite

GALLA 2sandblasted glass

transparent stripes

GALLA 3sandblasted glass

transparent stripes

GALLA 1transparent glass

Door leaf width: single leaf door „60”÷”90”Prices of door frames: adjustable door frame: pp. 152-153, fixed door frame pp. 157, technical informations: 138 hardware: pp. 139

Door leaf is made of tempered, 8mm glass pane.

GALLA 8decormat glasspattern treated

chemically


chemically

GALLA 10transparent glass screen printing


chemically


chemically

GALLA 11transparent glass screen printing

GALLA 12decormat glassscreen printing

GALLA 13decormat glassscreen printing

NEW DOOR LEAF IN SLIDING VERSION

134

GLASSGRACCAglass interior door leaf

Door leaf is made of tempered, 8mm glass pane with ceramic, permanent digital printing presented on particular model.

GRACCA 2 GRACCA 3 GRACCA 3transparent

GRACCA 4

GRACCA 6

GRACCA 5GRACCA 1

GRACCA 6transparent

GRACCA 8 GRACCA 9 GRACCA 10GRACCA 7

GRACCA 11 GRACCA 13GRACCA 12 GRACCA 14transparent

GRACCA 16GRACCA 15


NEWDOOR LEAF IN SLIDING VERSION


135

GRACCAglass interior door leaf

GLASS

Door leaf is made of tempered, 8mm glass pane with ceramic, permanent digital printing presented on particular model.

Gracca 23, 24, 25, 26 models are available with digital printing which imitates colours of veneer: walnut Cell and american walnut 3D.

GRACCA 17 GRACCA 18 GRACCA 19 GRACCA 21GRACCA 20 GRACCA 22

walnut

walnutamerican

GRACCA 23transparent

GRACCA 24 GRACCA 24transparent

GRACCA 25 GRACCA 26GRACCA 25transparent

GRACCA 23

GRACCA 26transparent




136

GLASSGOSSAglass interior door leaf

Door leaf is made of laminated glass which consist of two tempered 4mm glass panes glued together by foil with high quality printing.

GOSSA 1transparent

GOSSA 2 GOSSA 2transparent

GOSSA 3

GOSSA 4

GOSSA 3transparent

GOSSA 1

GOSSA 4transparent

GOSSA 5transparent

GOSSA 6 GOSSA 6transparent

GOSSA 5

GOSSA 7 GOSSA 8GOSSA 7transparent

GOSSA 9transparent

GOSSA 11GOSSA 10


NEWDOOR LEAF IN SLIDING VERSION


137

GOSSAglass interior door leaf

GLASS

Door leaf is made of laminated glass which consist of two tempered 4mm glass panes glued together by foil with high quality printing.

Models GOSSA 26-29 - door leaf is made of laminated glass which consist of two tempered 4mm, painted glass panes glued together by foil.

GOSSA 12 GOSSA 13 GOSSA 14 GOSSA 16transparent

GOSSA 15 GOSSA 17


GOSSA 19 GOSSA 20 GOSSA 21GOSSA 18 GOSSA 22 GOSSA 23

GOSSA 24 GOSSA 25 GOSSA 27 GOSSA 28 GOSSA 29GOSSA 26


Door leaf width: single leaf door „60”÷”90”Prices of door frames: adjustable door frame: pp. 152-153, fixed door frame pp. 157, technical informations: 138 hardware: pp. 139cia: 139

138

TECHNICAL INFORMATIONSREFERRED TO GLASS DOORS GALLA, GOSSA, GRACCA

Door leaf unit is made of safe, plain or glued, tempered 8mm glass pane which has in standard option holes for assembly of:

» hinges and lock in swing door leaf » round door handle and hardware adpated for sliding system door leaf

APPLICATIONGlass door leaf are used as interior doors in residential housing, public uti-lity buildings and collective residential buildings,

DOOR LEAF DIMENSIONS AND PLACEMENT OF HARDWARE DOOR LEAF WIDTH

Door leaf width SZ SZP

„60” 617 630

„70” 717 730

„80” 817 830

„90” 917 930SZ – width of glass swing door leafSZP – width of glass sliding door leafDOOR LEAF HEIGHT

2036 mm – height of glass swing door leaf2054 mm - height of glass sliding door leaf

NOTE: There is no possibility to shorten glass door leaf.

CLEARANCE BETWEEN A DOOR LEAF AND FLOORStandard clearance between door leaf unit and ready floor is 8 mm. .NOTES REFERRED TO HINGES

Door frames applied to glass doors should be equipped with two pivot ø 15 mm hinges.

OPENING DIRECTION OF GLASS DOOR LEAF

left right

Ventilation undercut (only swing door leaf)

Fulfilment of ventilation requirements for glass doors

Symbol ofthe doordimension

doors with ventilationundercut

ventilation surfaceof the undercut

and the clearance8 mm [m2]

required clearanceto meet ventilation

requirements[inmm]

”90” 0,027 2

”80” 0,024 5,5

”70” 0,021 10*

”60” 0,017 16** - door leaf „60” and „70” doesnt meet ventilation requirements.

Use of ventilation undercut in door leaf unit with width “80” - “90” and standard clearance between door leaf and floor (8 mm) will fulfil ventilation requirement - . total ventilation surface 0,022 m2.GALLA and GRACCA collections have obverse and reverse side.

GOSSA collection has uniform pattern on both sides, visible surfaces of door leaf are plain.

» GALLA and GRACCA matt, decorative side of glass pane or transparent, decorative side of glass pane

» GOSSA plain, glossy side of glass pane

plain, glossy side of glass pane in all collections

left sliding

right sliding

Glass door leaf swing Glass sliding door leaf

139

HARDWARE FOR GLASS DOORSDOOR LEAF

Depending on door leaf opening direction (left / right):- Metalbud door locks are configured, for left door leaf - left locks are used, for right door leaf - right door locks are used- remaining door locks are universal use (they can be configured left or right).In toilet lock it is necessary to choose one of the following combinations which present assembly situation (difference is in door leaf opening direction and/or placement of toilet blockade) :

Geze and Metalbud toilet locks– select right toilet lock outsideremaining locks – select left lock *

Geze and Metalbud toilet locks– select right toilet lock insideremaining locks – select right lock *

Geze and Metalbud toilet locks– select left toilet lock outsideremaining locks – select left lock *

Geze and Metalbud toilet locks– select left toilet lock insideremaining locks – select right lock *

* In toilet locks, except Geze and Metalbud locks, definition „left”, „right” refers to placement of toilet blockade: description „left lock” means that blockade is placed on exterior side of the door leaf , description „right lock” means that blockade is placed on interior side of the door leaf.

fig. 1. right door leaf / blockade outside fig. 2 left door leaf / blockade outside fig. 3 right door leaf / blockade inside fig. 4 left door leaf / blockade inside

aluminum lock

steel rectangular lock Metal-Bud

aluminum hinge

steel rectangular hinge Metal-Bud

toilet aluminum lock***

steel rectangular toilet lock***Metal-Bud

simple key aluminum lock

steel rectangular simple key lock Metal-Bud

cylinder aluminum lock**

steel rectangular cylinder lock Metal-Bud

simple key steel lock steel cylinder lock**toilet steel lock***steel lock steel hinge

** It is necessary to purchase patented cylinder 21/26 separately (see details in the table above)***toilet lock - selection of toilet lock see details above

price for a setglass door leaf price

door frame price

hardware price

GEZE lock

steel rounded lockMetal-Bud

GEZE toilet lock ***

steel rounded toilet lockMetal-Bud***

GEZE simple key lock

steel rounded simple key lock Metal-Bud

GEZE cylinder lock**

steel rounded cylinder lock Metal-Bud**

GEZE hinge

steel rounded hingeMetal-Bud

HARDWARE

SELECTION OF LOCKS FOR GLASS DOORS

140

handle PEGAZ (span 72 mm)Nickel mat for cylinder lock

handle METRO (span 72 mm)stainless steel for cylinder lock

interior backplate

exterior backplate NOTE:selection of left or right handle. Han-dle in set with backplate is adapted to door leaf with two locks except SOLID.collection.

upper backplate METROstainless steel for cylinder

lock

handle TOM with oblong backplate for cylinder lock (span 72 mm) matt chrome

handle FOKUS with oblong bac-kplate - satin nickel velvet

handle ZORBA with oblong bac-kplate -shiny chrome / satin

handle FOKUS with oblong backplate for simple key - satin

nickel velvet (span 72 mm)

handle ZORBA with oblong backpla-te for simple key-shiny chrome / satin

handle FOKUS with oblong backplate for cylinder lock - satin

nickel velvet (span 72 mm)

handle ZORBA with oblong backpla-te for cylinder lock -shiny chrome /

satin (span 72mm)

handle FOKUS with oblong bac-kplate for toilet key - satin nickel

velvet (span 72 mm)

handle ZORBA with oblong backplate for toilet lock -shiny chrome / satin

(span 72mm)

HANDLES

NEW

141

handle ONYX - Nickel / satin Simple keybackplate


toilet backplate

handle QUANTA - Nickel - satin Simple keybackplate

backplate forcylinder lock

toilet backplate

handle APUS - Nickel mat Simple keybackplate


toilet backplate

handle FENIKS - matt chrome Simple keybackplate


toilet backplate

Simple keybackplate

handle PEM - matt chrome backplate for cylinder lock

toilet backplate

Simple keybackplate

handle TOM - matt chrome backplate for cylinder lock

toilet backplate

HANDLES

142

handle LIBRA - nickel satin Simple keybackplate


toilet backplate

Simple keybackplate

handle ROMANA - chrome/Nickel lacquered backplate for cylinder lock

toilet backplate

handle APOLLO - satin Simple keybackplate


toilet backplate

handle PLATON - satin Simple keybackplate


toilet backplate

Simple keybackplate

handle JANE - Nickel lacquered backplate for cylinder lock

toilet backplate

Simple keybackplate

handle UNO - stainless steel backplate for cylinder lock

toilet backplate

HANDLES

143

handle FOKUS - satin nickel velvet

handle MINIMAL - nickel lacquered

Simple keybackplate

Simple keybackplate



toilet backplate

toilet backplate

Simple keybackplate

handle QUBIK - nickel lacquered backplate for cylinder lock

toilet backplate

handle DUO - graphite / chrome

handle DUO - satin nickel

Simple keybackplate

handle WARNA - satin Nickel backplate for cylinder lock

toilet backplate

HANDLES

Simple keybackplate


toilet backplate

Simple keybackplate


toilet backplate

NEW

NEW

144

handle RIO - graphite /chrome

handle RIO - satin nickel Simple keybackplate


toilet backplate

handle IBIZA - graphite/chrome Simple keybackplate


toilet backplate

handle IBIZA - satin nickel

handle IBIZA - silver satin

handle BETA - satin nickel

Simple keybackplate

Simple keybackplate

Simple keybackplate




toilet backplate

toilet backplate

toilet backplate

HANDLES

Simple keybackplate


toilet backplate

145

handle PRIMA - satin Nickel

Simple keybackplate


toilet backplatehandle MONDO - satin nickel

Simple keybackplate


toilet backplate

handle JOWISZ - stainless steel

handle TOPAZ - stainless steel Simple keybackplate


toilet backplate

Simple keybackplate


toilet backplate

Simple keybackplate

handle ONYX M - stainless steel backplate for cylinder lock

toilet backplate

Simple keybackplate

handle PROXIMA - stainless steel backplate for cylinder lock

toilet backplate

HANDLES

146

HANDLES

door knob - satin Nickel Simple keybackplate

Simple keybackplate



toilet backplate

toilet backplate

Simple keybackplate

door knob - platinum backplate for cylinder lock

toilet backplate

handle TREND - satin nickel

handle MEDA - shiny chromeinesrts in DRE-Cell, 3D and CPL colours

door knob - stainless steel Simple keybackplate


toilet backplate

door leaf thickness to 55 mm

backplate forcylinder lock

technical handle STAR TEC - class IV - stainless steel mattprice for a set (handle + backplate for cylinder lock)

Simple keybackplate


toilet backplate

NEW

NEW

handle FEBE - brushed nickel Simple keybackplate


toilet backplate

NEW

147

HANDLES

painted handle FORTUNA - white - chrome

handle malowana FORTUNA - czarna - chrom

handle EUROPA - satin nickel

handle MALIBU - Chrome shiny

handle NOVA - stainless steel

Simple keybackplate

Simple keybackplate

Simple keybackplate

Simple keybackplate





toilet backplate

toilet backplate

toilet backplate

toilet backplate

Simple keybackplate


toilet backplate

handle ZORBA - shiny chrome/satin Simple keybackplate


toilet backplate

148

VENEER COLOUR

oak Sand

silverwhite pine siberian elm vanilla***


alder

white(wood grain structure)

ash beechbleached oak

textured

white mat

latteFlugger = 4362NCS = S1505-Y50R

ashenRAL=7035

whitewater based lacquer UVRAL=9003

ecruRAL=9001

PAINTED

3D 3D3D3D

whiteacrylic lacquer UV

PAINTED

elm tabac

polish oak 3D

wenge darkelm anthracite

walnut american ebony elm

calvados

walnutdark cherrygolden oak golden oak textured

dark walnut textured

gray oaktextured***

wengetextured***

walnut satin

149

VENEER COLOUR

ebony

bleached oak

walnut

calvados walnut

birch beech oakoak light walnut bolivian

dark walnut

white beech alderoak

wenge

NOTE: The specificity of natural veneer is a possibility of differences in wood grain and staining. These diffe-rences can not be the basis of the accepted complaint.

NOTE: Due to different manufacturing technology: » LACK and ASCADA door leaf collection- lacquered HDF board » door frames, architraves, Finish quarter rounds, glazing bars - coated with Finish decor » door leaf edges - edge banding


* available only in SINCO door leaf, in LACK and ASCADA collections.** available only in frame construction door leaf SINCO

acacia

CPL 0,2 mm thickCPL 0,7 mm thick

honey oak


chestnut


virginia* niagara*

elm bleached*

white

W0118CPL 0,15 mm thickCPL 0,7 mm thick

light gray

U708ST15CPL 0,15 mm thickCPL 0,8 mm thickNCS = S2000-N

RAL = 7047

dark gray

U963ST15CPL 0,15 mm thickCPL 0,8 mm thickNCS = S7500-N

RAL = 7024

FINISH

CPL

FINISH

oak sonoma**

oak gray

CPL 0,2 mm thick

nobel white

VV F7206CPL 0,15 mm thick

oak welsh

CPL 0,2 mm thick

walnut

CPL 0,2 mm thick

walnut celini

CPL 0,2 mm thick

NEW NEW NEW NEW NEW

150

GLASS PANE

pattern 1 VETROdecormat

pattern 1 VETROdecormat brown

pattern 1 VETROdecormat graphite

pattern 2 VETRO pattern 3 VETRO pattern 4 VETRO pattern 5 VETRO pattern 8 VETRO

pattern 9 VETRO pattern 12 VETROpattern 10 VETRO pattern 13 VETROpattern 11 VETRO pattern 14 VETRO pattern 15 VETRO

pattern 1 VETROtransparent

NEW NEW NEW NEW

151

GLASS PANE

PRICESPrices and availability of glass pane in particular models are presented on pages reffered to the specific door leaf. Glass panes in our collections have obverse and reverse sides.

chinchila

decormat graphite

decormat bown

white bark

window bilnd

matt dre

152

ADJUSTABLE DOOR FRAMESWITH K63 AND N63 ANGULAR ARCHITRAVE

wall

5363

CmaxCmin

1722

780*

242

D - required wall passage width

75

5363

CmaxCmin

75

OR cross-section

ORN cross-section

* in case of third hinge

min

. 207

3

2043

2051

2029

required wall passage height 2073 mm

vertical cross-sectionof rebated door leaves

�oor

wall

8

2104


EDC

A

B

2041

2036

vertical cross-sectionof glass doors

8

min

. 207

920

57

2035

2110

2047

�oor

wall

DOOR FRAME CONSTRUCTIONAdjustable door frame is made of a high-quality wood-based MDF board. On its external sideit is entirely coated with a decorative wood-imitation DRE-Cell veneer, 3D veneer, Finishveneer, painted** - in configuration with angular architrave K63 or coated with natural veneer in configuration with angular architrave N63.Its construction allows for use in walls ranging between 75 - 320 mm in thickness and additio-nal adjustment for +20 mm. ** NOTE: To ensure the highest quality of painted door frames, before painting process they are coated with special material which constitues solid base.

APPLICATIONAdjustable door frame can be applied for:

» interior rebated door leaf (in all frame construction door and panel door collections having size „90” and wider; door frames should be equipped with three hinges ø 13,5 mm)

» entarnace doors ENTER (includes 3 hinges ø 13. 5 mm, additional latch plate - extra charge 20 PLN net)

» glass door („ORC” they are equipped witn two hinges ø 15 mm, special latch plate and rubber seal strip).

SET CONTAINSMain beam (one horizontal and two vertical elements together with masking elements), doorseal, a set of hinges, all necessary components for the instalation of door frames in accordancewith the supplied instruction. Door frames are packed in cardboard boxes.

Cross-section of adjustable door frame Natura

NATURA

3D 3D PAINTED GLASS

GLASS

3D PAINTED

FINISH FINISH

A B C D E60 600 624 644 680 75070 700 724 744 780 85080 800 824 844 880 95090 900 924 944 980 1050100 1000 1024 1044 1080 1150110 1100 1124 1144 1180 1250

for single-leaf doors

A B C D E100d 1035 1059 1079 1115 1185110d 1135 1159 1179 1215 1285120 1235 1259 1279 1315 1385130 1335 1359 1379 1415 1485140 1435 1459 1479 1515 1585150 1535 1559 1579 1615 1685160 1635 1659 1679 1715 1785170 1735 1759 1779 1815 1885180 1835 1859 1879 1915 1985190 1935 1959 1979 2015 2085200 2035 2059 2079 2115 2185

for double-leaf doors

153

ADJUSTABLE DOOR FRAMESWITH ANGULAR ARCHITRAVE T80

wall

E

1722

780*

242

CmaxCmin

OR TOP cross-section


wall

8092


min

. 207

3

2043

2051

2029

8

2121

DC

A

B

2041

�oor

wall


vertical cross-sectionof rebated door feaves

D - required wall passage width

2036

vertical cross-sectionof glass doors

8

min

. 207

920

57

2035

2110

2047

�oor

wall

DOOR FRAME CONSTRUCTIONAdjustable door frame with angular architrave T80 is equipped with a wide angular architrave elements (80 mm) and small rounding of the cross-section profile. It is made of a high-quality wood-based MDF board.On its visual side it is entirely coated with a decorative wood-imitation DRE-Cell veneer, 3D veneer and 0.15 - 0.2 mm CPL laminate coated with natural veneer or painted.Its construction allows for use in walls ranging between 75 - 320 mm in thickness and additional adjustmentfor +20 mm.** NOTE: To ensure the highest quality of painted door frames, before painting process they are coated with special material which con-stitues solid base..

for single-leaf doorsA B C D E

60 600 624 644 680 78470 700 724 744 780 88480 800 824 844 880 98490 900 924 944 980 1084100 1000 1024 1044 1080 1184110 1100 1124 1144 1180 1284

for double-leaf doors A B C D E100d 1035 1059 1079 1115 1219110d 1135 1159 1179 1215 1319120 1235 1259 1279 1315 1419130 1335 1359 1379 1415 1519140 1435 1459 1479 1515 1619150 1535 1559 1579 1615 1719160 1635 1659 1679 1715 1819170 1735 1759 1779 1815 1919180 1835 1859 1879 1915 2019190 1935 1959 1979 2015 2119200 2035 2059 2079 2115 2219

APPLICATIONAdjustable door frame can be applied for inetrior door leaf - rebated version with straight edge and to glass doors (ORC)

SET CONTAINSMain beam (one horizontal and two vertical elements together with masking ele-ments), door seal, a set of hinges, all necessary components for the instalation of door frames in accordance with the supplied instruction. Door frames are packed in cardboard boxes.Door frames used as a set with frame construction doors and door frames with size „90” and wider, should be equipped with three hinges ø 13,5 mm. Door fra-mes for glass door „ORC” are equipped witn two hinges ø 15 mm, special latch plate and rubber seal strip.

Cross-section of adjustable door frame with T80

154

ADJUSTABLE DOOR FRAMESWITH VARIABLE HEIGHTS AND ANGULAR ARCHITRAVE T80

�oor

C

D - required wall passage widthH4 - required wall passage height

ED

92 80

CmaxCmin

H5

OR TOP cross-section

H1

min

. H4

8

H2H3

H

wall


wall24

2

Z378

0

H2

H5

H1


B

A wall

H - height door frames

By the fact of the interest expressed by our clients in doors of custom sizes, we have introduced to our offer collections of Modern,Plus and Standard 10 door leaf model with adjustable door frame equipped with angular architrave T80 in 3 additional heights.


60 600 624 644 680 78470 700 724 744 780 88480 800 824 844 880 98490 900 924 944 980 1084100 1000 1024 1044 1080 1184

for double-leaf doorsA B C D E

120 1235 1259 1279 1315 1419130 1335 1359 1379 1415 1519140 1435 1459 1479 1515 1619150 1535 1559 1579 1615 1719160 1635 1659 1679 1715 1819170 1735 1759 1779 1815 1919180 1835 1859 1879 1915 2019190 1935 1959 1979 2015 2119200 2035 2059 2079 2115 2219

APPLICATIONAdjustable door frame with variable heights can be used for rebated door leafStandard 10, Modern and PLUS collections with three additional leaf height options: 1983 mm, 2110 mm and 2240 mm.SET CONTAINS

Main beam (one horizontal and two vertical elements together with masking ele-ments), door seal, a set of hinges, all necessary components for the instalation of door frames in accordance with the supplied instruction. Door frames are packed in cardboard boxes.

All door frames in additional options with varialble heights should be equipped with three hinges.

Price of the door frame for double-leaf doors +30%

H H1 H2 H3 H4 H5 Z31983 1969 1981 1991 2013 2061 16622110 2096 2108 2118 2140 2188 17892240 2226 2238 2248 2270 2318 1919

155

ADJUSTABLE DOOR FRAMESNON-REBATED

224

630

1717

wall

wall wall

�oor


60 627 651 671 711 81170 727 751 771 811 91180 827 851 871 911 101190 927 951 971 1011 1111100 1027 1051 1071 1111 1211


120 1274 1298 1318 1378 1458130 1374 1398 1418 1478 1558140 1474 1498 1518 1578 1658150 1574 1598 1618 1678 1758160 1674 1698 1718 1778 1858170 1774 1798 1818 1878 1958180 1874 1898 1918 1978 2058

cross-section ORB 095-300Vertical cross-section of non-rebated door leaf ORB


D - required width of wall passage

Horizontal cross-section of ORB

DOOR FRAME CONSTRUCTIONAdjustable non-rebated door frame is made of a high-quality wood-based MDF board.On its visual side it is entirely coated with a decorative wood-imitation DRE-Cell veneer, 3D veneer and 0.15 - 0.2 mm CPL laminate coated with natural veneer or painted **. Its construction allows to be used with leaves with the thickness of 40mm, and its design allows to be used on walls with ranging between 75 - 320 mm, also there is possibility foradditional adjustment of+20 mm.** NOTE: To ensure the highest quality of painted door frames, before painting process they are coated with special material which con-stitues solid base..

APPLICATIONAdjustable non- rebated door frame can be used with all DRE non-rebated collec-tions of the door leaf. SET CONTAINS

Main beam (one horizontal and two vertical elements) with wide angular archi-trave (80 mm) with small rounding angles of the cross-section profile (R2),, door seal, a set of hinges, all necessary components for the instalation of door frames in accordance with the supplied instruction. Door frames are packed in cardboard boxes.

Cross-section of ORB 075

* 075-095 door frame has a different cross section; for a 75-89 mm wall thick-ness, it will be necessary to shorten pen of the adjustable angle component

cross-section of non-rebated adjustable door frame

156

ADJUSTABLE DOOR FRAMES NON-REBATED WITH VARIABLE HEIGHTS


60 627 651 671 711 81170 727 751 771 811 91180 827 851 871 911 101190 927 951 971 1011 1111100 1027 1051 1071 1111 1211


120 1274 1298 1318 1378 1458130 1374 1398 1418 1478 1558140 1474 1498 1518 1578 1658150 1574 1598 1618 1678 1758160 1674 1698 1718 1778 1858170 1774 1798 1818 1878 1958180 1874 1898 1918 1978 2058

H - door leaf height H1 H2 H3 H4 H5 Z2 Z31983 1982 1994 2004 2019 2074 610 16572110 2109 2121 2131 2146 2201 651 17842240 2239 2251 2261 2276 2331 695 1914

* NOTE: 075-095 door frame has a different cross-section; for a 75-89 mm wallthickness, it will be necessary to shorten the pen of the moving angle bracket.

By the fact of interest expressed by our clients in non-rebated doors of custom sizes, we have introduced to our offer collections of Modern, Plus and the Standard 10 door leaf model with non-rebated adjustable door frame in 3 additional heights. Construction of the door frame is the same as in the non-rebated adjustable door frame (they vary only in height).

APPLICATIONNon-rebated adjustable door frame with variable heights can be used with nonre-bated Standard 10, Modern and Plus door leaf which are available with three ad-ditional door leaf height options: 1983 mm, 2110 mm and 2240 mm.

THE SET CONTAINS Main beam (one horizontal and two vertical elements together with maskingelements), door gasket, a set of hinges, all necessary components for theassembly of door frames in accordance with the supplied instruction.Door frames are packed in cardboard boxes.All door frames in three additional height options, should be equipped with 3hinges.ne w 3 zawiasy.

cross-section ORB 075

cross-section ORB 095-300

vertical cross-section of ORB

horizontal cross-section of ORB


157

FIXED DOOR FRAME


�xed door frame

�xed door frame SOFT

�xed door frame SOFT natura

required height of wall passage 2089 mm(2095 mm for glass door)

vertical cross-section nonrebaten doors


wall

wallwall

�oor�oor wall


vertical cross-section of glass doors

DOOR FRAME CONSTRUCTIONFixed door frame is made of a high-quality MDF board and it is coated withecological, wood-like decorative DRE-Cell veneer, 3D veneer, 0.15 - 0.2 mm CPL laminate, Finish veneer or natural veneer.Door frame has fixed width of 100 mm.

APPLICATIONFixed door frame can be used in the following types of doors:

» ENTER entrance doors (equipped with 3 ø 13,5 mm hinges and an additional upper latch plate)

» SOLID entrance doors (equipped with 3 ø 13,5 mm hinges and 4 hooks for the latch and latches of the flat multi-point lock)

» glass doors („OPC” they are equipped witn two hinges ø 15 mm, special latch plate and rubber seal strip).

» other remaining rebated door leaf (using 2 or 3 ø 13,5 mm hinges, in all frame construction door and panel door collections having size „90” and wider; door frames should be equipped with three hinges ø 13,5 mm) Masking strips are used in fixed door frames and SOFT door frames, where-asfor the fixed SOFT natura door frames angular architrave are used.

THE SET CONTAINS

Main beam (one horizontal and two vertical elements together with maskingelements), door seal, a set of hinges, all necessary components for the instalationof door frames in accordance with the enclosed instructions. Door frames arepacked in cardboard boxes.

cross-section of a SOFT natura fixed door frame

fixed door frameafter assembly

A B C D60 600 624 690 71270 700 724 790 81280 800 824 890 91290 900 924 990 1012100 1000 1024 1090 1112110 1100 1124 1190 1212

for single-leaf doors

A B C D100d 1035 1059 1125 1147110d 1135 1159 1225 1247120 1235 1259 1325 1347130 1335 1359 1425 1447140 1435 1459 1525 1547150 1535 1559 1625 1647160 1635 1659 1725 1747170 1735 1759 1825 1847180 1835 1859 1925 1947190 1935 1959 2025 2047200 2035 2059 2125 2147

for double-leaf doors

158

METAL DOOR FRAMES

honey

dark brown

white

D, D* - required width of wall passage* optionall assembly method

metal door frame cross-section


�oor

wall

wall wall

�nished �oor level

�nished �oor level


A B C C* D D*„80” 794 824 895 865 915 885„90” 900 930 1001 971 1021 991„100” 1000 1030 1101 1071 1121 1091

DOOR FRAME CONSTRUCTIONMetal door frame is made of 1.2-1.5 mm steel sheet which is coated with a special LAMPRE film in white, dark brown or honey colour. On its one side there are made 4 holes for latch bolt and bolts installed in door leaf and on the opposite side there are three sockets for hinges and anti-thrust bolts.

APPLICATIONMetal door frames can be applied to interior entrance doors ENTER/SOLID.

STANADRD OPTION » sockets for 3 hinges » additinal sockets for anti-thrust bolts » sockets for latch bolts of multi-point lock used in SOLID model

Required height of the wall passage measured from the levelof finished floor is 2086 mm in optional assembly method (withextra 15,5 mm below the level of finished floor) ** height ofpassage in the door frame is 2041,5 mm, it is necessary toshorten or built in door frame in flooring, in order to obtain2026 mm height in passage measured from finished foor.

159

ADJUSTABLE TUNNELWITH ANGULAR ARCHTRAVE K63, N63, T80

Horizontal cross-section of TUN

Single adjustable tunnelsymbol 60 70 80 90 100

A 600 700 800 900 1000C 644 744 844 944 1044D 664 764 864 964 1064E 750 850 950 1050 1150E* 784 884 984 1084 1184F 734 834 934 1034 1134F* 768 868 968 1068 1168

Double adjustable tunnelsymbol 120 140 160 180 200

A 1200 1400 1600 1800 2000C 1244 1444 1644 1844 2044D 1264 1464 1664 1864 2064E 1350 1550 1750 1950 2150E* 1384 1584 1784 1984 2184F 1334 1534 1734 1934 2134F* 1368 1568 1768 1968 2168

The adjustable tunnel is a decorative cover of the wall passage. It can be used as aseperate solution or as an integral part of the sliding wall-mounted system NT **. The adjustabletunnel is a product which is, at first glance visually similar to adjustable door frames, butwith a few differences:• there is no possibility to mount any hinges• there is no latch strike plate• there is no channel for a gasket• different heights and spans of the front and rear angle element (values E and F in tables)

** NOTE: TUN with angular architrave T80 is not adapted to be used with a wall-mounted NT sliding system.

Adjustable tunnel cross-section

OPTIONS AVAILABLE WITH EXTRA CHARGEtunnel for double leaf door: +30%

TUN cross-section with K63

TUN Natura cross-section with N63

vertical cross-sectionof adjustable tunnel

with K63 or N63

required height of wall opening 2067 mm

D- required width of the wall opening* refers to Adjustable Tunnel with T80

vertical cross-section of adjustable tunnel with T80

NATURA

3D

PAINTED

3D

PAINTED

CELL

TUN cross-section with T80

3D 3D

CELL

CPL

NATURA

NOTE: ** NOTE: To ensure the highest quality of painted tun-nels, before painting process they are coated with special mate-rial which constitues solid base.

160

DOOR FRAMES MASKING COMPONENTS

* architrave TOP is not available in the Finish veneer.

MASKING ARCHITRAVE SOFT NATURAapplication: fixed door frame SOFT natura

The set contains (for one side of the door ):one horizontal and two vertical components, pins and clips.

PRICE OF ANGULAR ARCHITRAVE: » angular architrave SOFT natura

Price for a set for one side of the door leafPrice of the anglar architrave for double-leaf doors +30%In order to purchase angular architrave, it is necessary to specify sideof the door leaf, on which, components will be mounted.

ARCHITRAVES

application: straight door frame, straight door frame SOFT

The set contains (for one side of the door):one horizontal and two vertical components,, plastic clips, pinsand clips. Architrave are packed in a cardboard box.

SOFT

QUARTER ROUNDS

Quarter Rounds are used to mask the angular connection between thewall and the door frame. A single item constitutes a trade unit.

quarter round 16 × 16 × 2200 mm

quarter round SOFT, SOFT natura11 × 18 × 2200 mm

FINISHFINISH

GLASS

3D 3D 3D3D

CPL

Connection of angular architrave

angular architrave clip (A)

(A)

Connection of archi-trave with door frame

SOFT STYLSTANDARD

(16×60) (16×70) (16×78)

TOP*

(16×80)

SKIRTING BOARDS

Length of skirting boards 2,62 mb

3D3D

LPP1W LPP2W LPP3W

161

VENTILATION ACCESORIES AND THE OTHER

HINGE COVERS » (set consist of 2 pcs. for 1 hinge)

Hinge covers are adjusted to hinges with a diameter of 13,5 mm. glossy gold

glossy chrome

chromemat

gold gold satin

chrome chromesatin

VENTILATION SLEEVES FOR PANEL DOORS

METAL VENTILATION SLEEVES

VENTILATION GRILLE

There is possibility to purchase a set (5 pcs.) of ventilation sleeves.DRE-Cell veneer, 3D veneer, CPL laminate and finish veneer - white, oak,calvados, brown, silver, gray.Natura - silver satin, gold satin, silver, gold.

Stainless steel

There is possibility to instal bathroom plastic ventilation grille, which is available in thefollowing colours: white, beige, calvados, brown, silver,creamy and gray (except for frame construc-tion doors, sliding doors, fire resistance doors and SOLID, ENTER and GALERIA natura ALU) or aluminum ventilation grille (except for LACK and ASCADA).

» plastic ventilation grille » aluminum ventilation grille

VENTILATION SLEEVES FOR FRAME CONSTRUCTION DOOR LEAF

For frame construction door leaf, except VETRO, it is possible to use metal or plastic ventilation sleeves ( 3 sleeves for „60” doors, 4 sleeves for „70” doors,5 sleeves for „80” - „100” doors)

PLASTIC VENTILATION SLEEVES

ventilation undercut

plastic ventilation grille

white maple oak walnutlight

calvados brown gray silver satin

gold satin

silver gold

T2 whit

e

T2 latte

T2 ecru

T2 ash,

Vanilla

T2 blea

ched

oak

T2 golde

n oak

T2 calva

dos, w

alnut

Fi

nish

T2 dark

walnut,

eb

ony,

wenge

dark

virg

inia,

niaga

ra

T2 wen

ge,

el

m anthr

acite

T2 gray

oak

VENTILATION UNDERCUTVentilation undercut can be applied in models of all collections (except for VETRO D and F,SOLID, ENTER, fire resistance doors and sliding systems, folding doors). Ventilation undercut can be applied upon customers request.

T2 elm, o

ak Fi

nish

oa

k San

d, elm

b

leach

ed Fi

nish,

oak s

onom

a

T2 ameri

can w

alnut

aluminum ventilation grille

T2 polish

oak

T2 elm ta

bac

CELL3D

3D FINISH PAINTED

PAINTED3D FINISH

FINISHCPL

round steel ventilation sleeveoutside diameter

55mm

square steel ventiltion sleeve

60 x 60 mm

T2 ashe

n

s

iberia

n elm

ashen creamy

162

DIMENSIONS AND PLACEMENT OF HINGES

magnetic lock

magnetic lock

hook lock

magnetic lockmagnetic lock

TECHNICAL INFORMATIONS

Rebated door leafRebated door leaf

Standard 10Modern, Plus

Rebated door leaf Sara Eco Folding doors

Non-rebated door leafNon-rebated door leaf

Standard 10Modern, Plus

Non-ebated door leaf Sara Eco Sliding system doors

Fire-resistance doors Olimp

Fire-resistance doors Forca Fire-resistance doors

Athos

163


DOOR LEAF HEIGHT2043 mm – total height of rebated and non-rebated door leaf2030 mm – total height of door leaf in the rebate (2033 for Sara Eco rebated door leaves)1983, 2043, 2110, 2240 mm – total possible height of STANDARD 10 door leaf and MODERN, PLUS collections (1970,2030, 2097, 2227 mm - measured in the door leaf rebate)SHORTENING OF DOOR LEAF

There is a possibility to shorten door leaf by your own, up to 60 mm (it is not possible to shorten following door leaf: VETRO, FIRE RESISTANCE DOORS, ENTER, SOLID entrance doors with a droping seal , door leaf of all collections in the sliding version, inactive door leaf, glass doors and folding doors).THRESHOLD CLEARANCE

Standard height of the gap between door leaf and the finished floor is 8 mm (6 mm for OLIMP fire doors).).NOTES ON HINGES

In rebated door leaf: frame construction doors, entrance doors (Enter, Solid) and in the other collections with size wider than „90”, 3 screw-in pivot hinges of ø 13,5 mm are mounted. For other interior rebated leaves, there is a possibility to choose 2 or 3 hinges.Fire-resistance doors - OLIMP EI30 and EI60 are equipped with 4 screw-in pivot hinges, while FORCA and ATHOS are equipped with 3 screw--in pivot hinges.Non-rebated door leaf come with pre-milled sockets for 3 hidden concealed W1078 hinges that are attached together with non-rebated door frame. SARA ECO rebated and non-rebated door leaf come with pre-milled sockets for 2 concealed hinges that are attached together with the door frame.Folding doors come with 3 hidden concealed hinges which join two parts of door leaf.

DOOR LEAF WIDTH

Symbol of door dimension

S SW SWSE SWS

„60” 644 618 - -

„70” 744 718 - -

„80” 844 818 824 824

„90” 944 918 924 924

„100” 1044 1018 - 1024

„110*” 1144 1118 - -

S - total door leaf widthSW - width in the rebate(for rebated door leaf)SWSE- width in the rebate of Sara Eco door leafSWS - width in the rebate of folding door leaf* - Width „110” available only in Standard 10 door leaf and OLIMP fireresistance doors.

Note: Total width of „40” side panels is 444 mm.

DIMENSIONS OF THE DOOR LEAF WITH 4 VARIABLE HEIGHTS(refers to door leaf STANDARD 10 and collections MODER,PLUS)

H H1 HK HZ HZ2 HZ3

1983 1970 850 1672 606 1653

2043 2030 910 1732 626 1713

2110 2097 977 1799 647 1780

2240 2227 1107 1929 691 1910

H - total height of the door leafH1 - door leaf height in the rebateHK - distance from the top rebate of door leaf to the axis of the handleHZ - distance from the upper edge of the door leaf to the mountingpoint of the third hinge

edge without rebate

concealed hinge

straight edge

magnetic lock screw-in pivot hinge

Non-rebated door leaf Rebated frame construction door leaf

164

DOOR LEAF THICKNESS AND SELECTION OF PATENTED CYLINDER

Door leaf type Door leaf thickness proportion in thedoor leaf(W0/Z0)

Recommended **dimension of thepatented cylinder

(W/Z)

Refers to patented cylinder with door knob

Patented cylinder with a door knob

inside (W/Z)

Patented cylinder with a door knob

outside (W/Z)

Rebated door leaf 40 14 / 26 25 / 4026 / 3626 / 4130 / 40

25G / 4026G / 3626G / 4130G / 40

25 / 40G26 / 36G26 / 41G30 / 40G

Rebated door leafSara Eco

40 24 / 16 35 / 3036 / 2636 / 3140 / 30

35G / 3036G / 2636G / 3140G / 30

35 / 30G36 / 26G36 / 31G40 / 30G

Non-rebated door leaf

40 20 / 20 31 / 3130 / 3035 / 35

31G / 3130G / 30 35G / 35

Non-rebated door leaf Sara Eco

40 16 / 24 30 / 3526 / 3631 / 3630 / 40

30G / 3526G / 3631G / 3630G / 40

30 / 35G;26 / 36G 31 / 36G30 / 40G

Folding door leaf 40 17/23 30/3531/3630/40

30G / 3531G / 3630G / 40

30 / 35G; 31 / 36G30 / 40G

fire resistanceOlimp EI 30

50 25 / 25 36 / 3635 / 3540 / 40

36G / 36 35G / 3540G / 40

fire resistanceOlimp EI 60

60 35 / 25 46 / 3645 / 35 50 / 40

46G / 3645G / 35 50G / 40

46 / 36G45 / 35G50 / 40G

fire resistanceAthos

50 26 / 24 36 / 3640 / 3541 /36

36G / 3640G / 3541G /36

36 / 36G40 / 35G41 /36G

fire resistance FORCA 50 26 / 24 Dragon M 40 / 35

* Patented cylinders are reversible - that is 25/40 = 40/25, 26g / 36 = 36 / 26G** Recommended dimensions (assuming that backplate is 10-mm thick, and patented cylinder doesnt exceed 5 mm above back plate)

Fig. Selection of patented cylinder dimension Fig. Selection of dimension of patented cylinder with door knob.

Dimension of patented cylinder is calculated using the following formula:W0 + backplate thickness + 2~3mm / Z0 + backplate thickness + 2~3mm

where:

W0 and Z0 – values have been presented in the table abovethickness of the backplate - measured (presented values in above table assume that backplate is 10-mm thick)

Selection of backplate with a door knob - if we want to mount a knob on:

- the inner side of door leaf – symbol of the door knob must be next to „W” dimension (see column 5 in the table)

- the external side of the leaf – symbol of the door knob must be next to „Z” dimension (see column 6 in the table)

inner side of door leaf ( from the side, on which door leaf closes)

external side of the leaf ( from the side, on which the leaf opens)


165


DOUBLE LEAF REBATED DOOR

Symbol of door d imen-sion

dimenison in [mm]

S2 S2W combination* Sc+Sb

„100d” 1078 1052 644+444

„110d” 1178 1152 744+444

”120” 1278 1252 844+444; 644+644

”130” 1378 1352 944+444; 744+644; 644+744

”140” 1478 1452 1044+444; 844+644; 744+744; 644+844

”150” 1578 1552 944+644; 844+744; 744+844; 644+944

”160” 1678 1652 1044+644; 944+744; 844+844;

744+944; 644+1044

”170” 1778 1752 1044+744; 944+844; 844+944; 744+1044

”180” 1878 1852 1044+844; 944+944; 844+1044

”190” 1978 1952 1044+944; 944+1044

”200” 2078 2052 1044+1044combination*-possible combination of active (Sc) and inactive (Sb) leaf width

SINGLE LEAF REBATED DOOR

We offer left, right and central door leaf

Only door frames produced by DRE fit double-leaf doors, that is the reason that we reccomend to our customers to buy doors as a complementary sets.DRE set includes 2 door leaf units and door frame

double leaf door price

door leafprice x 2

door frameprice

We offer double leaf doors: the right - then right door leaf becomes an active oneand left door leaf becomes inactive, and double left leaf - the left leaf is an active one and the right one is inactive.

An active door leaf has a rebate and a lock as a standard option.Inactive door leaf comes with a „counter rebate” and additionally is equipedwith a latch strike plate and a flush bolt as a standard fitting.

Flush bolt (A)

centra door leaf

right door leafleft door leaf

Hinges are located on the left sidewhen viewing from hinges sight

Hinges are located on the right sidewhen viewing from hinges sight

without locks and hinges

inactive left door leaf


active right door leaf


rebated double-leaf doors

rebated double-leaf doors

166

right leaf

when active leaf is equipped with lock non-active leaf is equipped with latch strike plate

left leaf left leaf

double leaf sliding system

We offer left, right and central door leaf (leaf without a lock and handle)

NON-REBATED DOOR LEAF - SLIDING VERSION

double leaf door price

door leafprice x 2

door frameprice

Symbol of door dimension

dimensions in [mm]

S2 combination* Sc+Sb

”120” 1291 644+644

”130” 1391 744+644; 644+744

”140” 1491 844+644; 744+744; 644+844

”150” 1591 944+644; 844+744; 744+844; 644+944

”160” 1691 1044+644; 944+744; 844+844;

744+944; 644+1044

”170” 1791 1044+744; 944+844; 844+944; 744+1044

”180” 1891 1044+844; 944+944; 844+1044

combination*-possible combination of active (Sc) and inactive (Sb) leaf width

SINGLE LEAF NON-REBATED DOOR

We offer left, right and central door leaf

centra door leaf


right door leafleft door leaf

DOUBLE LEAF NON-REBATED DOOR

We offer double leaf doors: the right - then right door leaf becomes an active oneand left door leaf becomes inactive, and double left leaf - the left leaf is an active one and the right one is inactive.

An active door leaf has lock as a standard option. Inactive door leaf is equiped with a latch strike plate and a flush bolt as a standard fitting.

cover strip*

*for double leaf non-rebated doors there is a possibility to purchase cover stripe separately

Hinges are located on the left sidewhen viewing from hinges sight

Hinges are located on the right sidewhen viewing from hinges sight

without locks and hinges



167


CONSTRUCTION OF PANEL DOORS » door leaf frame made of coniferous wood or MDF » core made of: stabilising insert „honeycomb” (fig.A), perforated chipboard (fig.B) and in fire resistnace doors core made of chipbo-ard

» external board HDF 3 mm or external board HDF 4 mm (Finea, Finea B, Enter, Solid)

» type of edge „karnies”, straight or without rebate

External boards of door leaf is finished with:a) in LACK, ASCADA collection - lacquered HDF boardb) in DRE-Cell veneer - decorative foil based on the polypropylenec) in 3D veneer - 3D foil based on decorative paperd) in CPL laminate - 0,15 - 0,2 mm CPL laminate or 0,7 - 0,8 mme) in natura collection- natural veneer, secured with cured varnish in UV technology

Fig. A. Stabilizing insert „honeycomb” Fig. B. perforated chipboard

Rebated fire resistance, anti-burglar doors Forca EI 30 Rebated fire resistance doors Athos EI 30

4xHDF board 3 mm

4xHDF board 3 mm

straight edge straight edge

steel string

construction of fire resistance doors Olimp EI30 construction of fire resistance doors Olimp EI60

glazing bar22x28 mm

glazing bar22x28 mm glass pane 26,4 mmglass pane 17,2 mm

stra

ight

edg

e

stra

ight

edg

e

168

straight edgestraight edge

straight edgestraight edge

straight edge

FILLINGS OF FRAME CONSTRUCTION DOOR LEAF:

Scala A; Sinco - 4 mm glass pane, flat 4 mm HDF boardScala B - 4 mm glass pane, 19 mm MDF profiled board Elsa A - 4 mm glass pane, flat 4 mm HDF boardElsa B - 4 mm glass pane, 19 mm MDF profiled board Premium 1-3 - 4 mm glass panePremium 4-7 - 4 mm glass pane, 4 mm HDF marquetries made in door leaf colourPremium 8-11 - 4 mm glass pane, 4 mm HDF marquetries coated with silver laminate Piano 1-6 - 4 mm glass pane, 16 mm MDF profiled board Piano 9-12 - 4 mm glass pane, 19 mm MDF profiled board Fosca 1-3 - 4 mm glass pane, 4 mm HDF board coated with silver laminateFosca 4-6 - 4 mm HDF board coated with veneer in door leaf colourEna - 4 mm glass paneTrevi - 4 mm glass pane, 19 mm MDF profiled board Triesta - 4 mm glass paneAuri - 4 mm glass paneVerano - 4 mm glass paneEmena - 4 mm glass paneNestor, Lexa - 4 mm glass pane, 19 mm MDF profiled board Even - 4 mm glass pane

Frame construction door leaf is entirely made of MDF:vertical stiles are made of 40 mm MDFhorizontal rails (exterior)are made of 35 mm MDFhorizontal rails (interior):- 22 mm MDF in door leaf models Auri, Piano, Even, Premium, Fosca, Sinco, Triesta*, Ena*, Verano* and Emena* (* In Ena 1-2, Triesta 1-2, Emena 1-2, Verano 1-2 colections one of horizontal rails consist of two combined 16 mm MDF rails which surround 4 mm glass - it refers to rail located next to large glass pane. While in models Ena 3-5, Verano 3-5, Emena 3-5 and Triesta 3 such a construction is refered to two rails located next to large glass pane.

- 35 mm MDF in door leaf models Nestor, Elsa, Lexa, Scala and Trevi** (** In collection Trevi 5-6 middle horizontal rail is made of 35 mm MDF, all remaining horizontal rails consist of two combined 16 mm MDF rails which surround 4 mm glass) .

FRAME CONSTRUCTION DOORS (IS NOT REFERED TO VETRO A, B, C, D, F)

Horizonatl cross-section of Scala and Trevi**

Horizonatl cross-section of Nestor, Lexa

profile of 16 mm MDF(Piano 1, 2, 5, 6)

Horizonatl cross-section of ELSA

profile of 19 mm MDF(Scala B, Trevi, Piano 9-12, Elsa B, Nestor, Lexa)

Horizonatl cross-section of door leafAuri, Emena, Verano, Piano, Premium, Fosca, Sinco, Ena, Even

Horizonatl cross-section of door leafEna, Trevi, Verano, Emena i Triesta (cross sec-tion present point where two rails are combi-ned)


169

REMAINING TECHNICAL INFORMATIONS:1. While maintaining standard dimensions of door leaf and door frame, clearance between „ready” floor and bottom edge of the door leafis 8 mm. In order to reduce this clearance, door frame should be appropriately shortened at the bottom.

2. Note! Prior to the purchase and assembly of construction woodwork, check whether the selected type of joinery meet technicalrequirements of the project and technical drawings, it is particulary necessary to make sure that the construction of walls and ceilings allowsfor the mounting of construction woodwork of weight specified in the table below:

Door leaf Door frame Other products

interior entrance fire resistance adjustable fixed adjustable tunnel sliding system

Maxweight

50 kg* 50 kg* 105 kg* 40 kg 20 kg 40 kg 20 kg

* max weight of single door leaf

3. Door leaf is wrapped in shrink film and the edges are additionally protected with Styrofoam or cardboard inserts.

4. Price of door leaf does not include door handles, backplates and patented cylinders (with the exception of SCALA Aand B collections in rebated and non-rebated versions in DRE-Cell veneer and 3D veneer also excluding NESTOR and ELSA collections inrebated and non-rebated version in DRE-Cell veneer and 3D veneer, where handle and backplate come free-of-charge).

5. It is possible to purchase doors and door frames CENTRA (in this option there is no sockets for the lock and hinges - option is not available for fire doors ENTER / SOLID, Sara Eco) at a price of a similar product equipped with hardware and pre-milled sockets. CENTRA door frames come with door seals. Set does not include hardware.

KICK PLATES

Kick plates so called „OKOPNIKI” it is finishing solution for selected panel door models with straight edge. We offer door leaf covered with thin 0.6 mm metal sheets made of stainless steel optional bottom and middle panels. It is also possiblethat both of panels are instaled at the same time on the selected door leaf. Height of the panel is 300 mm.Door leaf with kick plates must be filled with perforated chipboard.

There is possibility to order door leaf with bottom panel and ventilation undercut.

NOTE: If you wish to place an order, please contact the Customer Service Department.

door leaf model with bottom panel

door leaf model with middle panel

door leaf model with bottom and

middle panel


170

60 60

30

40

30

40

ventilation undercut in Vetro A i C

41

26 26

26

standard ventilation undercut

26 26

ventilation undercut Vetro Bventilation undercut in door leaf

with natural veneer

VENTILATION UNDERCUT

sim

ulta

neou

sly

ther

e ca

n be

use

d on

ly o

ne v

entil

atio

n so

lutio

n

ventilation sleeves

ventilation undercut

clearance between floor and door leaves

Ensuring ventilation surface for rebated doors**

Symbol ofdoor leaf

dimension

doors with ventilation sleeves

doors with ventilation undercut

ventilation surface

of sleeves andthe clearance 8

mm [m2]

required clearanceto meet

ventilationrequirements[in

mm]

ventilation surface

of undercutand the cle-

arance8 mm [m2]

required clearance

to meet venti-lation

requirements[inmm]

”100” 0,011 19* 0,033 0

”90” 0,010 21* 0,029 1

”80” 0,009 24* 0,025 4

”70” 0,008 28* 0,021 14*

”60” 0,007 33* 0,018 35*

The above-stated required clearance height of the space under the door assures total ventilation surface of 0,022 m2.The standard clearance for door leaf is 8-mm high.* It is necesarry to increase the clearance to the specified height by shortening door leaf at the bottom (when such a shortening is possible- see **)** Exceptions which are not indicated in the table (door leaf that can not be shortened):- Collection Vetro A and C - the use of ventilation undercut in the door with a width of “80” - “100” and a standard ground clearance of thedoor (8 mm) will fulfil ventilation requirement.- Collections Vetro B, D and F - do not meet the ventilation requirements.- Sliding door leaf- due to design of the sliding system (distance from the wall / tunnel - about 12 mm), door leaf meet the ventilationrequirement without need for additional options.

Ensuring ventilation surface for Sara Eco doors and all non-rebated doors

Symbol ofdoor leaf

dimension

doors with ventilation sleeves

doors with ventilation undercut

ventilation surface

of sleeves andthe clearance 8

mm [m2]

required clearanceto meet

ventilationrequirements[in

mm]

ventilation surface

of undercutand the cle-

arance8 mm [m2]

required clearance

to meet venti-lation

requirements[inmm]

”100” 0,0112 19* 0,033 0

”90” 0,0104 21* 0,029 1

”80” 0,0096 23* 0,025 4

”70” 0,0082 27* 0,021 12*

”60” 0,0074 32* 0,018 31*

6. Under the current regulations, doors to the bathroom, wash room and a separate toilets must be opened to the outwards have width of atleast 0,8 meter and height of 2 meter and also have on the bottom part openings with their total surface not smaller than 0,022 m2, in orderto fulfill correct air circulation. Door ventilation surface is the sum of the available ventilation components: ventilation grille (ensures theventilation surface of 0.022 m2 in all widths of doors) or ventilation undercut or ventilation sleeves, and the surface of the ground clearancebetween door leaf and the floor.


171

Producer provides 24 months of warranty for door leaves and door frames.More technical informations and informations refered to assembly process are available in product guarantee card.

This product catalogue shall not constitute an offer under the regulations of the Civil Code and is published only for information purposes. Information provided in this catalogue was up-to-date on the day the catalogue was published. Due to the company policy of constant de-velopment DRE reserves the right to introduce (without prior notice) of changes to technical parameters, equipement, extended warranty conditions and product specifi cation. The actual colours may vary from the colours printed in this catalogue. We reserve the right to errors in print.

Technical approvals:

Technical Approval ITB AT-15-6243/2015 (rebated interior doors)Technical Approval ITB AT-15-6761/2013 (SOLID and ENTER)Technical Approval ITB AT-15-7783/2014 (sliding system)Technical Approval ITB AT-15-8693/2011 (non-rebated interior doors)Technical Approval ITB AT-15-6103/2013 (fire resistance doors OLIMP EI30; OLIMP EI60)Technical Approval ITB AT-15-9248/2014 (SARA ECO doors)Technical Approval ITB AT-15-9363/2014 (fire resistance doors FORCA, ATHOS)Technical Approval ITB AT-15-8359/2010 (glass doors)Technical Approval ITB AT-15-9673/2016 (folding doors and sliding system glass doors)

INFORMACJE TECHNICZNE

EVEN - ecru

DYSTRYBUTOR

technohomelux.es...finish 3d finish 3d 3d 3d cpl explanations: panel doors, dre-cell veneer frame...

Documents