© copyright 2012 hewlett-packard development company, l.p. the information contained herein is...

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

FB7600 Appendix

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.2

Print Modes

Resolution (dpi)

# of Passes

Printing

Direction

# of CyclesBaseline mask

(%)

Printing Speed (m/sec)

Print Mode Name

Print x C. PrintPrintin

gExtra UV

Duty

POP_17 508 x 500 5 UniDir 25 0 0 100 0.80

POP_30 508 x 500 5 BiDir 25 0 1 100 1.20

POP_34_Text 600 x 400 3 UniDir 12 0 0 100 0.80

POP_40 508 x 400 3 UniDir 12 0 0 100 1.10

POP_48 508 x 500 3 BiDir 15 0 1 100 1.30

POP_52 508 x 400 3 BiDir 12 0 0 100 1.30

POP_55_solid 400 x 300 5 BiDir 15 1 0 200 1.65

Production_70 400 x 300 3 BiDir 9 1 0 200 1.30

Production_95 400 x 300 2 BiDir 6 2 0 200 1.80


The print height can be reduced to 1.5 mm. This feature is enabled from the Preferences/Quality tab and its purpose is to improve the print quality of the text provided the substrate is perfectly flattened on the printing table (otherwise a "rising media" problem might accrue).

Note: This feature can be enabled by FSE only after hardware checks and adjustments.

1.5mm Print Height

The 1.5mm print height is defined in the Substrate Editor for the specific substrate. It can be temporarily changed in the Job Properties window.


1.5mm Print Height The 1.5mm print height is defined in the Substrate Editor for the specific substrate. It can be temporarily changed in the Job Properties window.


The Flexible Media feature in the Substrate Editor supports automatic loading of thin flexible substrates and enables the user to expand the range of substrates to thinner substrates close to 130 gr/m2 (~5 pt).

Flexible Media


Flexible MediaThe user may select loading sequence which controls the vacuum zones differently.

When Flexible Media is activated, the relevant sequence can be selected from the drop-down menu


Sort BySorting according to name and date is available in the following screens: Add new Job Add existing Job Deleted (Job)s from disk Right click the column heading and select “Sort by name /Sort By Date Modified”.


Print Care


What are the features available in Print Care?

Print Care Overview

• Better Diagnostics and Troubleshooting• New Calibration Patterns for MNC• White Ink Calibration


Sources of Information


SAW

The engineers should know haw to use and locate technical documentation in SAW


Advanced Printer GuideAdvanced Printer Guide is the FB7600 interactive online manual. To access it, click Advance Printer Guide from the Help menu. The Advanced Printer Guide significantly saves time and money by providing: Instant online updates; compared to the printed version that required manual reproduction, duplication and mail distribution Quick access to required information through the Index and Search tabs; compared to time-consuming searches in the hard copy version, which may also, in time, be lost or misplaced.


Capture Web Site

Capture is a web site for HP customers.In Capture site, HP customer can find: printer information, tip & tricks, technical documentation, training materials and more.

https://h30475.www3.hp.com/Default.aspx?ReturnUrl=/country/uk/en/landing.aspx&cc=uk&lang=en


GCSN

The GCSN portal enables channel partners to perform various activities, for support purposes, channels partners CE’s have access to the “Technical Information” section only


11.7.3 Software


Before (Old working point)

After (New working point)

By changing the work point of the print heads –

• changing the pulse width to 7 instead of 10

• raising the ink temperature from 38 to 42 – we change the drop shape (making it rounder).

What is the “New Working Point”?


3 pt.

4 pt.

Prod70 Printing speed: 1.3m/sec Print Height: 2 mm

3 pt.

4 pt.

How does it work? – Cont.


New Vacuum Caps

New vacuum cups No switch between rigid and flexible substrates Customer Benefit Save up to 15 minutes of set up time when changing between jobs, for operator ease of use

* This kit is not part of the MLK and will be available in Q1 as After Market Kit for current install base.

* Q1 Installations - we have created FCO kit to be implemented during the installation; in case of ML installation, the customer will get an additional kit

Vacuum Cups Upgrade

• Ship by mail

• Customer self installation only (No engineer visit is required)


Enables you to Enable/disable The piston (Vacuum + Up/Down)

Suction cup for Rigid and flexible media


LOCK BUSHING – now it is easier to move the piston , improved user experience. and it is also locked it to the beam .


Supports thin media, lower position of the assembly

Slider – forcing the piston to move down & up without swiveling

OR component –keep the piston up in disable mode


ColorLogic application

Metallic colors effect

What is itA design application S.W plugin optimized for the FB7600 that enables creation of metallic effect

The application

Premium and unique POP/POS applications

Designer RIP Print


Printing metallic substrates with FB7600

Metallic colors effect

• Tests that were conducted in R&D showed that it is possible to print on metal (reflective) media using the FB7600 without effecting the Print heads health.

• Currently only Hazen Silver media is officially certified, with more media types certificates on the way.

• For maintaining nozzle health when printing with Hazen Silver, it is recommended to perform maintenance every 2 hours.


Negative Text T&T

By adding 0.25 stroke to thin text (using Adobe Illustrator) we actually compensating for the lines and small text size loss and it will look sharper, yet thicker (depending on stroke size).


Hostert Automatic Loader

Hostert underwent HP qualification As HP’s silver partner.

QUALIFICATION RESULTS: • 4-up (multi loader like)

• 10 qualified media types

• Double-sided

• Improved media handling

Prerequisites for Autoloader installation:• The auto loader will support only FB7600 and upgraded FB7500 with

CP389A• Kits will be sold through AFM

P/N CP411A

Contents

Safety kit Vacuum cups

kit (CP407A) 4up sensor kit 4up Nip plate


Thank you

© copyright 2012 hewlett-packard development company, l.p. the information contained herein is...

Documents

printer information

sources of information

print care slide

menu slide

saw slide

flexible media slide

software slide

technical information