Þ × * bureau of indian standardsbis.org.in/sf/pgd/pgd36(1493-1499)_15102014.pdfinternational...

भारतीय मानक यरो BUREAU OF INDIAN STANDARDS

PRODUCTION AND GENERAL ENGINEERING DEPARTMENT

यापक परिचालन म मसौदा (DRAFT IN WIDE CIRCULATION)

रलख रषण सञापन/DOCUMENT DESPATCH ADVICE

तकनीकी सममतत/TECHNICAL COMMITTEE

तिल शतत रणाली विषय सममतत, पीजीडी 36

Fluid Power System Sectional Committee PGD 36

सभी सदय/All members of:

1. क) उपादन एि सामाय इजीतनररिग विभागीय परिषद क चच िखनिाल सदय

Interested Member of Production & General Engineering Division Council

ख) तिल शतत रणाली विषय सममतत, पीजीडी 36

Fluid Power System Sectional Committee PGD 36

2. चच िखन िाल अय सदय/Other Interested Members

Dear Sir(s),

तरल शतत रणाली विषय सममतत, पीजीडी 36 िारा तयार ककया गया तननमलखित सलन रलि रात कर/Please find

enclosed the following document prepared by the Fluid Power System Sectional Committee, PGD 36:

रलख सया/DOC NO. शीषषक/ TITLE

पीजीडी /PGD 36(1493)

रिचामलत तरल शतत — धनामक विथापन पप, मोटर और एकीकत रषण — परीषण की विधध और बतनयादी थरदशा कायषकाररता का रततीकरण (IS 10069 का दसरा पनरीषण)

(आई.सी.एस. 23.100.10) ( ISO 4409 : 2007 का अमभरण)

Hydraulic fluid power – Positive displacement pumps, motors and integral transmission

— Methods of testing and presenting basic steady state performance (Second revision

of IS 10069) (ICS23.100.10) (Adoption of ISO 4409 :2007)

पीजीडी /PGD 36(1494)

रिचामलत तरल शतत — एकल रॉड मसमलडर क आरोपण आयाम, 16 मगापाकल

(16 बार) मसरीज — भाग 1 ममडडयम मसरीज [IS 11003 (भाग1) का दसरा पनरीषण)

(आई.सी.एस. 23.100.20) ( ISO 6020 -1 : 2007 का अमभरण) Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar)

series — Part 1 : Medium series [(Second revision of IS 11003(Part 1)]

(ICS23.100.20) (Adoption of ISO 6020 -1 : 2007)

सदभभ /Ref. ददनाक/Date

पीजीडी /PGD 36 (1493, 1494,1495, 1498,1499) 10 10 2014

पीजीडी/PGD 36(1495)

रिचामलत तरल शतत — एकल रॉड मसमलडर क आरोपण आयाम, 16 मगापाकल

(16 बार) मसरीज — भाग 2 कॉपतट मसरीज [IS 11003 (भाग 2) का दसरा पनरीषण)

(आई.सी.एस. 23.100.20) ( ISO 6020 -2 : 2006 का अमभरण)

Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar)

series — Part 2 : Compact series [(Second revision of IS 11003(Part 2)]

(ICS23.100.20) (Adoption of ISO 6020 -2 : 2006)

पीजीडी/PGD 36 (1498)

रिचामलत तरल शतत — मोटर क अमभलषण का तनधाषरण — भाग 1: तनयत तनन गतत और तनयत दाब पर [IS 14849 (भाग 1) का पहला पनरीषण) (आई.सी.एस. 23.100.10) (

ISO 4392 -1 : 2002 का अमभरण)

Hydraulic fluid power – Determination of characteristics of motors - Part 1: At constant

low speed and at constant Pressure [(First Revision of IS 14849 (Part 1)] (ICS23.100.10)

(Adoption of ISO 4392 -1 : 2002)

पीजीडी/PGD 36(1499 )

रिचामलत तरल शतत — मोटर क अमभलषण का तनधाषरण — भाग 2 : रियषता [IS 14849

(भाग 2) का पहला पनरीषण) (आई.सी.एस. 23.100.10) ( ISO 4392 -2 : 2002 का अमभरण)

Hydraulic fluid power – Determination of characteristics of motors - Part 2: Startability

[(First Revision of IS 14849 (Part 2)] (ICS23.100.10) (Adoption of ISO 4392 -2 : 2002)

कपया इस रलि का अिलोकन कर और अपनी समततयॉ यह बतात हए भज कक अतत: यदद य मानक क प म रकामशत हो जाए तो इन पर अमल करन म आपक यिसाय अथिा कारोबार म तया कदिनाईयॉ आ सकती ह/Kindly examine the draft

amendment to standards and forward your views stating any difficulties which you are likely to experience in your

business or profession, if these are finally adopted as National Standards.

समततयॉ भजन की अततम ततधथ/Last date for comments: 15.01.2015.

यदद आपकी कोई समतत हो तो कपया ददय गय राप म अयोहताषरी को उपरोतत पत पर

भज/Comments, if any, may please be made in the format as given in overleaf and mailed to the undersigned at

the above address.

यदद आपकी कोई समततयॉ रात नही होती ह या किल सपादकीय समततयॉ रात होती ह तो हम उपरोतत

रताि को भारतीय मानक क अतममत प स अधधरहण करन की आपकी सहमतत मान लन की अनमतत द। परत यदद

हम तकनीकी समततयॉ रात होती ह तब या तो ि विषय सममतत क अयष स परामशष पचात भारतीय मानक क

अतममत प म पाररत कर अधधरदहत ककए जाएग अथिा उनकी इछानसार आियक कायषिाही हत विशय सममतत क

विचाराथष भज जाएग/In case, no comments are received or comments received are of editorial nature, you will

kindly permit us to presume your approval for the above documents as finalized for adoption as Indian

Standards. However, in case of comments of technical in nature are received then it may be finalized either in

consultation with the Chairman, Sectional Committee or referred to the Sectional Committee.

धयिाद/Thanking you,

भिदीय/Yours faithfully,

सल न/Encls.: उपरोतत/As above. (राजपाल/Rajpal)

रमि/ Head (पीजीडी/PGD)

Email: [email protected]

mailto:[email protected]

NOTE: The technical content of document is not attached herewith / available on website. To get the

document please contact:

Head

Production and General Engineering Department

Bureau of Indian Standards

9, B. S. Zafar Marg,

New Delhi-110002

Email: [email protected]

Telephone/ fax: 011-23234819

mailto:[email protected]

For Comments Only

Doc: PG 36(1493)

October 2014

Draft Indian Standard Hydraulic fluid power – Positive displacement pumps, motors and integral transmission – Methods of testing and

presenting basic steady state performance

(Second revision of IS 4409*)

Not to be reproduced without the permission of BIS or used

as Standard

Last date for receipt of comments:

15-01-2015

NATIONAL FOREWORD

This Indian Standard (Second Revision) which is identical with ISO 4409: 2007 ‘Hydraulic fluid power – Positive

displacement pumps, motors and integral transmissions - Determination of steady – State performance’ issued by the International Organization for Standardization (ISO), will be adopted by the Bureau of Indian Standards on the

recommendations of the Fluid Power Systems Sectional Committee and approval of Production and General

Engineering Division Council.

This standard was first published in 1982 and subsequently revised in 1992. This second revision has been

harmonized with ISO 4409: 2007 by adoption to make pace with the latest developments that have taken place at

international level.

The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations.

Certain terminology and conventions are, however, not identical to those used in Indian Standards. Attention is

particularly drawn to the following:

a) Wherever the words ‘International Standard’ appears, referring to this standard, they should be read as

‘Indian Standard’.

b) Comma (,) has been used as a decimal marker while in Indian Standards the current practice is to use a

point (.) as the decimal marker.

In this adopted standard, reference appears to certain International Standards for which Indian Standards also exist.

The corresponding Indian Standards, which are to be substituted in their respective places, are listed below along

with their degree of equivalence for the editions indicated:

International Standard Corresponding Indian Standard Degree of

Equivalence

ISO 31: 1992 ─ Quantities and Units

(All Parts) 1)

IS 1890 ─ Quantities and Units

(All Parts)

Identical

ISO 4391 : 1983 ─ Hydraulic fluid power

─ Pumps, motors and integral

transmissions ─ Parameter definitions

and letter symbols

IS 11147:1984 /ISO 4391:1983 ─ Recommendations for parameter

definitions and letter symbols for

hydraulic fluid power pumps, motors

and integral transmissions

Identical

ISO 5598 : 2008 – Fluid power systems

and components –Vocabulary

IS 10416:1992/ISO 5598:1985 –Fluid power

systems and components –Vocabulary

(first revision)

Identical with

ISO 5598:1985

ISO 9110-1 :1990 – Hydraulic fluid power

– Measurement techniques – Part 1 :

General measurement principles

IS 15181(Part1):2002/ISO 9110-1:1990

– Hydraulic fluid power – Measurement

techniques – Part 1: General measurement

principles

Identical

ISO 9110-2 : 1990 – Hydraulic fluid

power – Measurement techniques – Part 2

: Measurement of average steady-state

pressure in a closed conduit

IS 15181(Part 2):2002/ISO 9110-2:1990

Hydraulic fluid power – Measurement

techniques – Part 2: Measurement of average

steady-state pressure in a closed conduit

Identical

The concerned technical committee has reviewed the provisions of following ISO Standard referred in this

adopted standard and has decided that it is acceptable for use in conjunction with this standard:

ISO Standard Title

ISO 1219 -1 : 2012

Fluid power systems and components -- Graphical symbols and circuit

diagrams -- Part 1: Graphical symbols for conventional use and data-

processing applications

For the purpose of deciding whether a particular requirement of this standard is complied with, the final value,

observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960

‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.

__________________ 1)

Since revised in 2009

For Comments Only

Doc: PG 36(1494)

October 2014

Draft Indian Standard

Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1 :

Medium series

[(Second revision of IS 11003(Part 1)]


as Standard


15-01-2015

NATIONAL FOREWORD

This Indian Standard ( Part 1) (Second Revision) which is identical with ISO 6020-1 :2007 ‘Hydraulic fluid power

— Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1 : Medium series’ issued by the International Organization for Standardization ( ISO ) will be adopted by the Bureau of Indian Standards on the




harmonized with ISO 6020 -1 : 2007 by adoption to make pace with the latest developments that have taken place at


In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an

enclosed circuit. One component of such systems is the fluid power cylinder. This is a device which converts power

into linear mechanical force and motion. It consists of a movable element that is a piston and piston rod, operating

within a cylindrical bore.

IS 11003 consists of the following parts under the general title ‘Hydraulic fluid power — Mounting dimensions for

single rod cylinders, 16 MPa (160 bar) series’:

Part 1 Medium series (Second revision)

Part 2 Compact series (Second revision)












Equivalence

ISO 3320 : 19871)

─ Fluid power systems

and components – Cylinder bores and piston

rod diameters – Metric series

IS 8208:2004 /ISO 3320:1987 Fluid power

systems and components – Cylinder bores

and piston rod diameters – Metric series

(first revision)

Identical

ISO 4395 : 2009 ─ Fluid power cylinders –

Piston rod thread dimensions and types

IS 13533:1992/ISO 4395:1978

Fluid power cylinders – Piston rod

thread dimensions and types

Identical with

ISO 4395 : 1978

ISO 5598 : 2008 – Fluid power systems and

components –Vocabulary

IS 10416:1992/ISO 5598:1985 –Fluid

power systems and components –Vocabulary (first revision)

Identical with

ISO 5598:1985

ISO 6099 : 2001 – Fluid power systems and

components – Cylinders –identification code

for mounting dimensions and mounting

Types

IS 15168:2002/ISO 6099:1985 Fluid power

systems and components – Cylinders –

Identification code for mounting

dimensions and mounting types

Identical with

ISO 6099 : 1985

ISO 6149 -1 :2006 –Connections for fluid

power and general use – Ports and stud ends

with ISO 261 threads and O-ring sealing –

Part 1 : Ports With O-Ring Seal In

Truncated Housing

IS 13170(Part 1):1999 /ISO 6149-1:1993

Connections for fluid power and general use

– Ports and stud ends with ISO 261 threads

and O-ring sealing – Part 1 : Ports With O-

Ring Seal In Truncated Housing (first revision)

Identical with

ISO 6149 : 1993



ISO Standard Title

ISO 1179 – 1: 2013 Connections for general use and fluid power -- Ports and stud ends with ISO 228-1

threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports

ISO 6162 -1: 2012 Hydraulic fluid power -- Flange connections with split or one-piece flange clamps

and metric or inch screws -- Part 1: Flange connectors, ports and mounting surfaces

for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127



for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76




_____________ 1)


For Comments Only

Doc: PG 36(1495)

October 2014


Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2 :

Compact series

[(Second revision of IS 11003(Part 2)]


as Standard


15-01-2015

NATIONAL FOREWORD

This Indian Standard (Part 2) (Second Revision) which is identical with ISO 6020-2 :2006 ‘Hydraulic fluid power

— Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2 : Compact series’ issued by the International Organization for Standardization ( ISO ) will be adopted by the Bureau of Indian Standards on the




harmonized with ISO 6020 -1 : 2007 by adoption to make pace with the latest developments that have taken place at



enclosed circuit. One component of such systems is the fluid power cylinder. This is a device which converts power

into linear mechanical force and motion. It consists of a movable element that is a piston and piston rod, operating

within a cylindrical bore.

IS 11003 consists of the following parts under the general title ‘Hydraulic fluid power — Mounting dimensions for

single rod cylinders, 16 MPa (160 bar) series’:

Part 1 Medium series (Second revision)

Part 2 Compact series (Second revision)












Equivalence

ISO 3320 : 19871)

─ Fluid power systems

and components – Cylinder bores and

piston rod diameters – Metric series

IS 8208:2004 /ISO 3320:1987 Fluid power

systems and components – Cylinder bores and

piston rod diameters – Metric series

(firstrevision)

Identical

ISO 4395 : 2009 ─ Fluid power cylinders

– Piston rod thread dimensions and types

IS 13533:1992/ISO 4395:1978

Fluid power cylinders – Piston rod

thread dimensions and types

Identical with

ISO 4395 : 1978





(first revision)

Identical with

ISO 5598:1985


and components – Cylinders –

Identification code for mounting

dimensions and mounting types

IS 15168:2002 /ISO 6099:1985Fluid power

systems and components – Cylinders –

Identification code for mounting dimensions

and mounting types

Identical with

ISO 6099 : 1985

ISO 6149 -1 :2006 –Connections for fluid

power and general use – Ports and stud

ends with ISO 261 threads and O-ring

sealing – Part 1 : Ports With O-Ring Seal

In Truncated Housing

IS 13170(Part 1):1999 /ISO 6149-1:1993

Connections for fluid power and general use –

Ports and stud ends with ISO 261 threads and

O-ring sealing – Part 1 : Ports With O-Ring

Seal In Truncated Housing(first revision)

Identical with

ISO 6149 : 1993



ISO Standard Title

ISO 1179 – 1: 2013 Connections for general use and fluid power -- Ports and stud ends with ISO 228-1

threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports



for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127



for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76

ISO 8133 : 2006 Hydraulic fluid power -- Single rod cylinders, 16 MPa (160 bar) compact series --

Mounting dimensions for accessories




_____________ 1)


For Comments Only

Doc: PG 36(1498)

October 2014


Hydraulic fluid power – Determination of characteristics of motors - Part 1: At constant low speed and at constant

Pressure

[(First Revision of IS 14849 (Part 1)]

Not to be reproduced without the permission of BIS or used as

Standard


15-01-2015

NATIONAL FOREWORD

This Indian Standard (Part 1) (First Revision) which is identical with ISO 4392-1 :2002 ‘Hydraulic fluid power –

Determination of characteristics of motors - Part 1: At constant low speed and at constant Pressure ’ issued by the International Organization for Standardization ( ISO ) will be adopted by the Bureau of Indian Standards on the



This standard was first published in 2000. This first revision has been harmonized with ISO 4392-1 :2002 by

adoption to make pace with the latest developments that have taken place at international level.


enclosed circuit. Hydraulic motors are units which transform hydraulic energy into mechanical energy, usually with

a rotary output.

IS14849 consists of the following parts under the general title ‘Hydraulic fluid power – Determination of

characteristics of motors ’:

Part 1 At constant low speed and at constant pressure (First revision)

Part 2 Start ability (First revision)

Part 3 At constant flow and at constant torque












Equivalence

ISO 3448 : 1992 Industrial liquid

lubricants — ISO Viscosity classification

IS 9466:1980| ISO 3448 : 1992 industrial liquid


Technically

Equivalent

For Comments Only

Doc: PG 36(1498)

October 2014




and letter symbols





Identical





(first revision)

Identical with

ISO 5598:1985




IS 15181(Part1):2002/ISO 9110-1:1990



principles

Identical





IS 15181(Part 2):2002/ISO 9110-2:1990




Identical




For Comments Only

Doc: PG 36(1499)

October 2014


Hydraulic fluid power – Determination of characteristics of motors - Part 2: Startability

[(First Revision of IS 14849 (Part 2)]


as Standard


15-01-2015

NATIONAL FOREWORD

This Indian Standard (Part 2) (First Revision) which is identical with ISO 4392-2 : 2002 ‘Hydraulic fluid power –

Determination of characteristics of motors - Part 2: Startability ’ issued by the International Organization for

Standardization ( ISO ) will be adopted by the Bureau of Indian Standards on the recommendations of the Fluid

Power Systems Sectional Committee and approval of Production and General Engineering Division Council.

This standard was first published in 2000. This first revision has been harmonized with ISO 4392-2 : 2002 by

adoption to make pace with the latest developments that have taken place at international level.


enclosed circuit. Hydraulic motors are units which transform hydraulic energy into mechanical energy, usually with

a rotary output.

IS 14849 consists of the following parts under the general title ‘Hydraulic fluid power – Determination of

characteristics of motors ’:

Part 1 At constant low speed and at constant pressure (First revision)

Part 2 Start ability (First revision)

Part 3 At constant flow and at constant torque












Equivalence

ISO 3448 : 1992 — Industrial liquid


IS 9466:1980| ISO 3448 : 1992 — industrial

liquid lubricants — ISO viscosity

classification

Technically

Equivalent




and letter symbols





Identical





(first revision)

Identical with

ISO 5598:1985




IS 15181(Part1):2002/ISO 9110-1:1990



principles

Identical





IS 15181(Part 2):2002/ISO 9110-2:1990




Identical




FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS

(Please use A4 size sheet of paper only and type within fields indicated, Comments on each

clauses/ sub-clauses/table/fig. etc be started on a fresh box. Information in Column 3 should

include reasons for the comments and suggestions for modified wording of the clauses when

the existing text is found not acceptable. Adherence to this format facilitates Secretariat’s work)

Doc. No.

Title:

LAST DATE OF COMMENTS:

NAME OF THE COMMENTATOR/ORGANIZATION: _________________________

Sl.

No.

Clause/Sub-clause/

para/table/fig.No.

Commented

Comments

* For Bureau’s use Only

Þ × * bureau of indian standardsbis.org.in/sf/pgd/pgd36(1493-1499)_15102014.pdfinternational...

Documents