نحوه براورد و احجام ومقادیر پیش بینی باقی مانده 8 تا...

Row Activity Unit

4-3 MECHANICAL EQUIPMENTS :

4-3-1 Installation Cost Of Furnace KG

4-3-2 Installation Cost Of Package Equipments KG

4-3-3 KG

4-3-4 Installation Cost Of Drum & Dryer & Ejector KG

4-3-5 Installation Cost Of Mixer & Blower KG

4-3-6 Installation Cost Of Pump KG

BANDAR ABBAS GAS CONDENSATE REFINERY

MECHANICAL EQUIPMENTS

Installation Cost Of Heavy Weight Package Equipments W>40 ton

Row Activity Unit


MECHANICAL EQUIPMENTS

4-3-7 Installation Cost Of Compressor KG

4-3-8 Installation Cost Of Static Equipments KG

4-3-9 KG

4-3-10Installation Cost Of Flare KG

Installation Cost Of Static Equipments - Heavy Weight W>40 ton

Row Activity Unit

4-4 PIPING : A/G4-4-1/A (Inch-Dia)

4-4-2/A (Inch-Dia)

4-4-3/A (Inch-Dia)

4-4-4/A (Inch-Dia)

4-4-5/A (Inch-Dia)

4-4-6/A (Inch-Dia)

4-4-7/A (Inch-Dia)

4-4-8/A (Inch-Dia)

BANDAR ABBAS GAS CONDENSATE REFINERYPIPING

Installation and Erection and Painting Of Stainless Steel Piping for (Welded Joints, Threded Joints and Flang Joints) (On Rack)

Installation and Erection and Painting Of Stainless Steel Piping for (Welded Joints, Threded Joints and Flang Joints) (Underground or Sleeper)

Installation and Erection and Painting Of Alloy Steel Piping for (Welded Joints, Threded Joints and Flang Joints)(On Rack)

Installation and Erection and Painting Of Alloy Steel Piping for (Welded Joints, Threded Joints and Flang Joints) (Underground or Sleeper)

Installation and Erection and Painting Of Copper Nickle Piping for (Welded Joints, Threded Joints and Flang Joints)(On Rack)

Installation and Erection and Painting Of Copper Nickle Piping for (Welded Joints, Threded Joints and Flang Joints) (Underground or Sleeper)

Installation and Erection and Painting Of LTCS Piping for (Welded Joints, Threded Joints and Flang Joints)(On Rack)

Installation and Erection and Painting Of LTCS Piping for (Welded Joints, Threded Joints and Flang Joints) (Underground or Sleeper)

BANDAR ABBAS GAS CONDENSATE REFINERYPIPING

4-4-9/A (Inch-Dia)

4-4-10/A (Inch-Dia)

4-4-11/A (Inch-Dia)

4-4-12/A (Inch-Dia)

4-4-13/A (Inch-Dia)

4-4-14/A Installation And Erection Of Valve (Inch-Dia)

Installation and Erection and Painting Of Underground Carbon steel Piping for (Welded Joints, Threded Joints and Flang Joints)

Installation and Erection and Painting Of Aboveground Carbon steel Piping for (Welded Joints, Threded Joints and Flang Joints) On Rack

Installation and Erection and Painting Of Aboveground CRST Piping for (Welded Joints, Threded Joints and Flang Joints) On Sleeper

Installation And Erection Of GALV Piping for (Welded Joints, Thresded Joints and Flang Joints)

Installation And Erection Of Fiberglass Piping according to drawings and specifications for (Welded Joints, Threded Joints and Flang Joints) (GRP,GRV, FRP,…)

ITE

M

DESCRIPTION UNIT

PLANT PABX TELEPHONE SYSTEM MTO

A1

A1.1 Industrial and weather proof No.

A1.2 Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

A2

A2.1 16 pair terminal, Industrial and weather proof No.

A2.2 16 pair terminal, Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

A2.3 50pair terminal, Industrial and weather proof No.


A3

A3.1 16 pair terminal, Industrial and weather proof No.


A4

A4.1 2Pair MT

A4.1 6 pair MT

A4.2 10 pair MT

A4.3 25 pair MT

A4.4 50 pair MT

A4.5 100 pair MT

A4.6 200 pair MT

A5 MT


TELECOMMUNICATION SYSTEM

Telephone set, Outdoor, minimum IP66, Analogue, equipped with sound absorbing acoustic hood and stand, flashing beacon and audible horn as per Spec. No. 3034-00-ED-TC-JSP-70001

Telephone Junction box, outdoor, minimum IP66, equipped with brass cable gland, earth tag and other accessories as per Spec. No. 3034-00-ED-TC-JSP-70001

Intermediate Distribution Frame, outdoor, minimum IP66, equipped with brass cable gland, earth tag and other accessories as per Spec. No. 3034-00-ED-TC-JSP-70001

Telephone cable, multi-pair, 0.6mm conductor diameter, jelly filled, steel wire armoured,lead sheethed?, as per Spec. No. 3034-00-ED-TC-JSP-70009

powercable, for flashing beacon and horn, 3C2.5 SQMM, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009

ITE

M

DESCRIPTION UNIT



A6 MT

A7

A8 MT

A9 NO.

FIRE ALARM COMMUNICATION SYSTEM

B1

B1.1 Industrial and weather proof No.

B1.2 Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

B2

B2.1 16? pair terminal, Industrial and weather proof No.

B2.2 16? pair terminal, Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

B2.3 50 pair terminal, Industrial and weather proof No.

B2.4 50 pair terminal, Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

B3

B3.1 16? pair terminal, Industrial and weather proof No.

B3.2 16? pair terminal, Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

B4 Fire loud speaker, Outdoor, IP67, 0.5-25 Watt, as per Spec. No. 3034-00-ED-TC-JSP-70002

B4.1 Industrial and weather proof No.

B4.2 Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

power cable, for flashing beacon and horn, 3C25 SQMM, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009

Control cable, for flashing beacon and horn, 3C2.5 SQMM, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009

Fiber optic cable, single mode, ?? core, armoured, lead sheathed, as per Spec. No. 3034-00-ED-TC-JSP-70008

power Junction box, outdoor, minimum IP66, equipped with brass cable gland, earth tag and other accessories as per Spec. No. 3034-00-ED-TC-JSP-70001

Dialess Fire Telephone set, Outdoor, minimum IP66, Analogue, equipped with sound absorbing hood/stand as per Spec. No. 3034-00-ED-TC-JSP-70002

Telephone Junction box, outdoor, minimum IP66, equipped with brass cable gland, earth tag and other accessories as per Spec. No. 3034-00-ED-TC-JSP-70002

Intermediate Distribution Frame, outdoor, minimum IP66, equipped with brass cable gland, earth tag and other accessories as per Spec. No. 3034-00-ED-TC-JSP-70002

ITE

M

DESCRIPTION UNIT



B5

B5.1 2 pair MT

B5.2 6 pair MT

B5.3 10 pair MT

B5.4 25 pair MT

B5.5 50 pair MT

B5.6 100 pair MT

B5.7 MT

B5.8 No.

B5.9 MT

INTRAPLANT SYSTEM

C1

C1.1 Industrial and weather proof No.

C1.2 Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

C2 Sound absorbing acoustic hood, outdoor, made of glass reinforced laminate, suitable for item-1 above No.

C3



C5 Intra-plant loud speaker, Outdoor, IP67, 30 Watt, Horn type, as per Spec. No. 3034-00-ED-TC-JSP-70003



C6 MT

Telephone cable, multi-pair, 0.6mm conductor diameter, jelly filled, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009

Control cable, for fire loud speaker, fire resistant according to IEC 60331, 3C2.5?? SQMM, steel wire armoured

Fire speaker pole,12 meter height, tiltable, hot dipped galvanized, as per Spec. No. 3034-00-ED-TC-JSP-70002


Intra-plant page/party station, Outdoor, minimum IP65, including external flashing light/strobe, matching transformer, induction coil and amplifier, as per Spec. No. 3034-00-ED-TC-JSP-70003

Amplifier station, outdoor, minimum IP65, Frequency response: 250-4000 Hz, as per Spec. No. 3034-00-ED-TC-JSP-70003

Intra-plant cable (for call station), steel wire armoured, lead sheath, as per Spec. No. 3034-00-ED-TC-JSP-70009

ITE

M

DESCRIPTION UNIT



C7 MT

C8 MT

C9 MT

C10 MT

SURVEILLANCE CCTV SYSTEM

D1

D1.1 Industrial and weather proof No.

D1.2 Explosion proof, ATEX II 2G Ex Zone 2, Group IIC, T3 No.

D2



D3



D4


Intra-plant cable (for amplifier station), steel wire armoured, lead sheath as per Spec. No. 3034-00-ED-TC-JSP-70009

Control cable, for flashing beacon , fire resistant according to IEC 60331, 3C2.5 SQMM, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009

Control cable, for intra-plant loud speaker, fire resistant according to IEC 60331, 3C2.5 SQMM, steel wire armoured


Color CCTV Camera, PTZ facility, Outdoor IP66, minimum 22X optical zoom, Analog, equipped with outdoor SS-316 housing, lens window washer/wiper, sun shield, day & night lens, in association with junction box

comprising encoder and media converter, as per Spec. No. 3034-00-ED-TC-JSP-70005

Dome Color CCTV Camera, PTZ facility, Outdoor IP66, minimum 26X optical zoom, Analog, equipped with SS-316 outdoor housing, lens window washer/wiper, sun shield, day & night lens, in association with junction

box comprising encoder and media converter, as per Spec. No. 3034-00-ED-TC-JSP-70005

Color CCTV Camera, Fixed, Outdoor IP66, Analog, equipped with outdoor SS-316 housing, lens window washer/wiper, sun shield, day & night lens, in association with junction box comprising encoder and media

converter, as per Spec. No. 3034-00-ED-TC-JSP-70005

Dome Color CCTV Camera, Fixed and vari-focal, Outdoor IP66, Analog, equipped with SS-316 outdoor housing, lens window washer/wiper, sun shield, day & night lens, in association with junction box comprising

encoder and media converter, as per Spec. No. 3034-00-ED-TC-JSP-70005

ITE

M

DESCRIPTION UNIT




D5

D5.1 Dedicated to dome camera No.

D5.2 Dedicated to industrial camera No.

D6 Coaxial cable, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009 MT

D7 Fiber optic cable, single mode, 4 core, single wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009 MT

D8 MT

D9 MT

D10 MT

D10 MT

D11 MT

D12 NO.

SECURITY CCTV SYSTEM

E1

E1.1 Industrial and weather proof No.

E2 50


CCTV Camera pole, 5 meter height, tiltable, hot dipped galvanized, as per Spec. No. 3034-00-ED-TC-JSP-70005

Fiber optic cable, single mode, 24 core, single wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009


Power cable, for CCTV junction box, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009,3C2.5 SQMM

Power cable, for CCTV junction box, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009,3C4 SQMM

Link cable, connecting camera to relevant JB, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009

power Junction box, outdoor, minimum IP66, equipped with brass cable gland, earth tag and other accessories as per Spec. No. 3034-00-ED-TC-JSP-70001

Color CCTV Camera, PTZ facility, Outdoor IP66, minimum 22X optical zoom, Analog, equipped with outdoor SS-316 housing, lens window washer/wiper, sun shield, day & night lens, in association with junction box

comprising encoder and media converter, as per Spec. No. 3034-00-ED-TC-JSP-70005

ITE

M

DESCRIPTION UNIT



E3


E4


E5 3

E5.1 Dedicated to dome camera No.

E5.2 Dedicated to industrial camera No.

E6 Coaxial cable, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70005 MT

E7 Fiber optic cable, single mode, 4 core, single wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70005 MT

E8 MT

E9 MT

E10 Power cable, for CCTV junction box, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009 MT

E11 No.

E12 MT

Color CCTV Camera, Fixed, Outdoor IP66, Analog, equipped with outdoor SS-316 housing, lens window washer/wiper, sun shield, day & night lens, in association with junction box comprising encoder and media

converter, as per Spec. No. 3034-00-ED-TC-JSP-70005

Dome Color CCTV Camera, Fixed and vari-focal, Outdoor IP66, Analog, equipped with SS-316 outdoor housing, lens window washer/wiper, sun shield, day & night lens, in association with junction box comprising

encoder and media converter, as per Spec. No. 3034-00-ED-TC-JSP-70005

CCTV Camera pole, 5 meter height, tiltable, hot dipped galvanized, as per Spec. No. 3034-00-ED-TC-JSP-70005



Security CCTV master junction box ,outdoor IP66, SS 316 enclosure, as per Spec. No. 3034-00-ED-TC-JSP-70006

Link cable, connecting camera to relevant JB, steel wire armoured, as per Spec. No. 3034-00-ED-TC-JSP-70009


Electrical

Activity Unit

4-5 Electrical

4-5-1-1

Installation and testing of DC UPS system

SetDC system 110 V,25 kW

supply from 400 V,50 Hz,3 Ph

with Ni-Cd batteries and distribution board

4-5-1-2Installation and testing of AC UPS system

Set

4-5-1-3Installation and testing of AC UPS system

Set

4-5-1-4 Installation and testing of 33KV cubicles having off load switches Set

4-5-1-5Installation and testing of emergency diesel generator

Set400V, 50 Hz,3 Ph ,0.8 PF , 500kVA,1500 RPM, indoor use ,day tank and piping ,required accessories

4-5-1-6

Installation and testing of power transformer

Set20/6.3 kV , 10/12.5 MVA

Dyn 11 Connection

with primary & secondary cable connection and required accessories

4-5-1-7

Installation and testing of neutral grounding resistor

Set6.3 kV ,100A 10S, 70 Ohms

outdoor , IP 55

required accessories

4-5-1-8 20 kV ,Ring main unit panel Set

4-5-1-9

Installation and testing of MV switchgear

Set

AC system 230 V,90-120 kVA Supply from 400V,50 Hz,3 Ph with Ni-Cd batteries and distribution board and by pass transformer

AC system 110 V,12 kVA Supply from 400V,50 Hz,3 Ph with Ni-Cd batteries and distribution board and by pass transformer


Electrical

Activity Unit

4-5-1-9

Indoor , 6 kV, 31.5 kA 1S main busbar

Set

2 incoming and 1 bus tie 1600A CB, with necessary metering and protection

4 transformer feeder 630A CB, with necessary metering and protection

2 transformer spare feeder 630A CB, with necessary metering and protection

1 motor (P>1000 kW) feeder 630A CB, with necessary metering and protection

1 motor (P>1000 kW) spare feeder 630A CB, with necessary metering and protection

7 motor (150 kW<P<1000kW) feeder , fuse and contactor, with necessary metering and protection

2 motor (150 kW<P<1000 kW) spare feeder , fuse and contactor , with necessary metering and protection & 2 capacitor feeder, 630A CB, with necessary metering and protection


Electrical

Activity Unit

4-5-1-10

Installation and testing of Distribution transformer

Set6/0.42kV,2000/3150 kVA ,Dyn11

with primary cable connection and secondary bus duct connection and required accessories

4-5-1-11

Installation and testing of LV Bus duct

Set400V , 3 Ph ,4000 A , 65kA 1S

and required accessories

4-5-1-12

Installation and testing of LV switchgear

Set

400V , 3 Ph , 3200 A,65kA 1S

2 transformer incoming 3200A , 1 diesel generator incoming 1000A for

with necessary metering and protection

1 bus tie 3200A ,1 bus tie 1000A


outgoing feeders with necessary metering and protection

4-5-1-13


Set

400V , 3 Ph , 3200 A,65kA 1S

2 normal incomings 800A, 1 emergency incoming 320A





4-5-1-14


Set

400V , 3 Ph , 3200 A,65kA 1S


Electrical

Activity Unit

4-5-1-14

1 normal incoming 1000A

Setwith necessary metering and protection




4-5-1-15Installation and testing of LV switchgear

Set400/230V , 3Ph+N , 50 Hz& 2 transformer incoming 3200A

4-5-1-16

Installation and testing of MV variable frequency drive

Set400V,3Ph,50 Hz

(P ≈ 1250kw)


Electrical

Activity Unit

4-5-1-17Installation and testing of LV switchgear

Set400/230V , 3Ph+N , 50 Hz

4-5-1-18Installation and testing of substation normal lighting panel

Set400/230V , 3 Ph , 50 Hz

4-5-1-19Installation and testing of substation emergency lighting panel

Set400/230V , 3 Ph , 50 Hz

4-5-1-20Installation and testing of control room normal lighting panel

Set400/230V , 3 Ph , 50 Hz

4-5-1-21Installation and testing of control room emergency lighting panel

Set400/230V , 3 Ph , 50 Hz

4-5-1-22

Installation and testing of normal lighting distribution panels

Set400V , 3 Ph , 50 Hz

explosion proof or Industrial type

4-5-1-23

Installation and testing of emergency lighting distribution panel

Set400V , 3 Ph , 50 Hz

Industrial type or explosion proof

4-5-1-24

Installation and testing of power distribution panels

Set400V , 3 Ph , 50 Hz

Industrial type or explosion proof

4-5-1-25 Installation and testing of lighting transformer 400/420 Set

4-5-1-26Installation and testing of lighting transformer 400/420

Set230V ,315 KVA ,


Electrical

Activity Unit

4-5-1-27 Installation of magnetic bearing panel Set

4-5-1-28 Installation of PDCS panel Set

4-5-1-29 Meter

4-5-2 Installation and testing of MV cable 12/20 kV, copper conductor ,XLPE insulated, armoured, PVC sheathed

4-5-2-1 3 x 150 mm² Meter

4-5-2-2 3 x 185 mm² Meter

4-5-2-3 3 x 240 mm² Meter

4-5-2-4 3 x 300 mm² Meter

4-5-2-5 1 x 95 mm² Meter

4-5-2-6 1 x 240 mm² Meter

4-5-3 Installation and testing of MV cable 6/10 kV, copper conductor ,XLPE insulated, armoured, PVC sheathed

4-5-3-1 1 x 240 mm² Meter

4-5-3-2 3 x 35 mm² Meter

4-5-3-3 3 x 50 mm² Meter

4-5-3-4 3 x 70 mm² Meter

4-5-3-5 3 x 95 mm² Meter

Installation and testing of MV cable 26/45 KV, copper conductor, XLPE insulated, copper taped screened armoured, PVC sheathed 3 x 95 mm²


Electrical

Activity Unit

4-5-3-6 3 x 120 mm² Meter

4-5-3-7 3 x 150mm² Meter

4-5-3-8 3 x 185 mm² Meter

4-5-3-9 3 x 240 mm² Meter

4-5-3-10 1 x 240 mm² Meter

4-5-3-11 3 x 300 mm² Meter

4-5-3-12 1 x 95 mm² Meter

4-5-4 Installation and testing of MV cable 8.7/15 kV, copper conductor ,XLPE insulated, armoured, PVC sheathed

4-5-4-1 3 x185 mm² Meter

4-5-4-2 3 x 240 mm² Meter

4-5-5 Installation and testing of MV cable 12/20(24) kV, copper conductor ,XLPE insulated, armoured, PVC sheathed

4-5-5-1 3 x 240 mm² Meter

4-5-6

4-5-6-1 3 x 2.5 mm² Meter

4-5-6-2 4 x 2.5 mm² Meter

4-5-6-3 5 x 2.5 mm² Meter

Installation and testing of control cable 0.6/1 kV , copper conductor , PVC insulated , galvanized steel armoured , PVC sheathed


Electrical

Activity Unit

4-5-6-4 12 x 2.5 mm² Meter

4-5-6-5 7 x 2.5 mm² Meter

4-5-6-6 10 x 2.5 mm² Meter

4-5-6-7 20 x 2.5 mm² Meter

4-5-6-8 8 Triads x 0.75 mm² PT100 Meter

4-5-6-9 27 x 2.5 mm² Meter

4-5-6-10 7 Triads x 0.75 mm² PT100 Meter

4-5-6-11 2 pairs x1.5 mm² Meter

4-5-6-12 3 pairs x1.5 mm² Meter

4-5-7

4-5-7-1 1 x 185 mm² Meter

4-5-7-2 1 x 16 mm² Meter

4-5-7-3 1 x 150 mm² Meter

4-5-7-4 2 x 2.5 mm² Meter

4-5-7-4 2 x 6 mm² Meter

4-5-7-5 3 x 2.5 mm² Meter

Installation and testing of LV Power cable 0.6/1 kV, copper conductor , XLPE insulated , galvanized steel armoured, PVC sheathed


Electrical

Activity Unit

4-5-7-6 3 x 4 mm² Meter

4-5-7-7 3 x 6 mm² Meter

4-5-7-8 3 x 10 mm² Meter

4-5-7-9 3 x 16 mm² Meter

4-5-7-10 3 x 25 mm² Meter

4-5-7-11 3 x 35 mm² Meter

4-5-7-12 3 x 50 mm² Meter

4-5-7-13 3 x 70 mm² Meter

4-5-7-14 3 x 95 mm² Meter

4-5-7-15 3 x 120 mm² Meter

4-5-7-16 3 x 150 mm² Meter

4-5-7-17 3 x 185 mm² Meter

4-5-7-18 3 x 240 mm² Meter

4-5-7-19 3 x 300 mm² Meter

4-5-7-20 3 x 25 + 16mm² Meter

4-5-7-21 3 x 35 + 16mm² Meter


Electrical

Activity Unit

4-5-7-22 3 x 50+25 mm² Meter

4-5-7-23 3 x 70+35 mm² Meter

4-5-7-24 3 x 95+50 mm² Meter

4-5-7-25 3 x 120+70 mm² Meter

4-5-7-26 3 x 150+70 mm² Meter

4-5-7-27 3 x 185 + 95 mm² Meter

4-5-7-28 3 x 240 + 120 mm² Meter

4-5-7-29 3 x 300 + 150 mm² Meter

4-5-7-30 4 x 2.5 mm² Meter

4-5-7-31 4 x 4 mm² Meter

4-5-7-32 4 x 6 mm² Meter

4-5-7-33 4 x 10 mm² Meter

4-5-7-34 4 x 16 mm² Meter

4-5-7-35 4 x 25 mm² Meter

4-5-7-36 4 x 35 mm² Meter

4-5-7-37 4 x 50mm² Meter


Electrical

Activity Unit

4-5-7-38 4 x 70 mm² Meter

4-5-7-39 4 x 95 mm² Meter

4-5-7-40 4 x 120 mm² Meter

4-5-7-41 4 x 150 mm² Meter

4-5-7-42 4 x 185 mm² Meter

4-5-7-43 4 x 240 mm² Meter

4-5-7-44 5 x 16 mm² Meter

4-5-7-45 5 x 25 mm² Meter

4-5-7-46 5 x 35 mm² Meter

4-5-7-47 5 x 50 mm² Meter

4-5-7-48 5 x 70 mm² Meter

4-5-7-49 5 x 95 mm² Meter

4-5-7-50 5 x 120 mm² Meter

4-5-7-51 5 x 150 mm² Meter

4-5-7-52 5 x 185 mm² Meter

4-5-7-53 5 x 240 mm² Meter


Electrical

Activity Unit

4-5-7-54 7 x 2.5 mm² Meter

4-5-7-55 10 x 2.5 mm² Meter

4-5-7-56 12 Triads x 1.5 mm² Meter

4-5-8

4-5-8-1 3 x 2.5 mm² Meter

4-5-8-2 3 x 4 mm² Meter

4-5-8-3 3 x 25 + 16 mm² Meter

4-5-8-4 4 x 2.5 mm² Meter

4-5-8-5 4 x 6 mm² Meter

4-5-8-6 4 x 16 mm² Meter

4-5-8-7 5 x 10 mm² Meter

4-5-9

4-5-9-1 3 x 2.5 mm² Meter

4-5-9-2 4 x 2.5 mm² Meter

4-5-9-3 4 x 16 mm² Meter

4-5-10

Installation and testing of lighting cable, 0.6/1 kV, copper conductor , PVC insulated ,unarmoured, PVC sheathed

Installation and testing , 0.6/1KV,3Core x 2.5 mm² Lighting Cable,CU/XLPE/LS/SWA/PVC, copper conductor , XLPE insulation, Lead sheathed, Steel Wire armored , PVC

Installation of heat shrinkable termination kits for MV (6/10KV) copper conductor, XLPE insulated, armoured cable ,copper terminal lugs and required accessories


Electrical

Activity Unit

4-5-10-1 1 x 95 mm² Set

4-5-10-2 1 x 240 mm² Set

4-5-10-3 3 x 25 mm² Set

4-5-10-4 3 x 50 mm² Set

4-5-10-5 3 x 70 mm² Set

4-5-10-6 3 x 95 mm² Set

4-5-10-7 3 x 150 mm² Set

4-5-10-8 3 x 185 mm² Set

4-5-10-9 3 x 300 mm² Set

4-5-10-10 3 x 150 mm² or 3 x 240 mm² 25kv Set

4-5-10-11 3 x 240 mm² Set

4-5-10-12 3 x 70 mm² or 3 x 95 mm² 45kv Set

4-5-11

4-5-11-1 3 x 240mm2 Set

4-5-11-2 3 x 300mm2 Set

Installation of heat shrinkable termination kits for MV (11KV) copper conductor, XLPE insulated, armoured cable ,copper terminal lugs and required accessories,outdoor type


Electrical

Activity Unit

4-5-12

4-5-12-1 3 x 185mm2 Set

4-5-12-2 3 x 240mm2 Set

4-5-13

4-5-13-1 3 x 150mm2 Set

4-5-13-2 3 x 240mm2 Set

4-5-14

4-5-14-1 3 x150mm2 Set

4-5-14-2 3 x240mm2 Set

4-5-15

4-5-15-1 10 cm Meter

4-5-15-2 20 cm Meter

4-5-15-3 30 cm Meter

4-5-15-4 60 cm Meter

4-5-15-5 100 cm Meter

Installation of heat shrinkable termination kits for MV (11KV) copper conductor, XLPE insulated, armoured cable ,copper terminal lugs and required accessories,indoor type

Installation of heat shrinkable termination kits for MV (20KV) copper conductor, XLPE insulated, armoured cable ,copper terminal lugs and required accessories,indoor type

Installation of heat shrinkable termination kits for MV (20KV) copper conductor, XLPE insulated, armoured cable ,copper terminal lugs and required accessories, outdoor type

Installation of cable ladder/tray standard length 2 or 3 m with all required accessories including brackets complete and cover with supporting equipment and tee, cross , reducer and elbow for following sizes:


Electrical

Activity Unit

4-5-16 Installation of electrical steel conduit with installation of clamp , coupling , bushing for following sizes

4-5-16-1 1 “ Meter

4-5-16-2 Meter

4-5-16-3 Meter

4-5-16-4 Meter

4-5-16-5 Meter

4-5-16-6 Meter

4-5-16-7 Installation and testing of convenience outlet 230 V ,explosion proof or industrial type No

4-5-16-8 Installation and testing of junction box for utility outlet +3 or 4 way, explosion proof or industrial No

4-5-16-9 No

4-5-16-10 Installation and testing of welding outlet,400 V, 63A No

4-5-16-11 Installation and testing of junction box 3 or 4 way ,explosion proof or industrial for welding outlet No

4-5-17

4-5-17-1 M20 No

4-5-17-2 M25 No

4-5-17-3 M32 No

1 ½”(40mm)

2”(50)

3“(75)

4”(100)

6”(150)

Installation and testing of convenience outlet, explosion proof or industrial 230/110/24 V , 16A, with built in transformer

Installation Installation of Weather Proof type cable gland for XLPE or PVC insulated, galvanized steel armoured, PVC sheathed type cable for following items,outdoor,,IP 55,


Electrical

Activity Unit

4-5-17-4 M40 No

4-5-17-5 M50 No

4-5-17-6 M63 No

4-5-17-7 M75 No

4-5-17-8 M90 No

4-5-18

4-5-18-1 M20 No

4-5-18-2 M25 No

4-5-18-3 M32 No

4-5-18-4 M40 No

4-5-18-5 M50 No

4-5-18-6 M63 No

4-5-18-7 M75 No

4-5-18-8 M90 No

4-5-18-9 M100 No

4-5-19

Installation of explosion proof or industrial type cable gland for XLPE or PVC insulated, galvanized steel armoured, PVC sheathed type cable for following items

Installation Installation of Dust- Proof type cable gland for XLPE or PVC insulated, galvanized steel armoured, PVC sheathed type cable for following items,outdoor,IP 41, indoor


Electrical

Activity Unit

4-5-19-1 M20 No

4-5-19-2 M25 No

4-5-19-3 M32 No

4-5-19-4 M40 No

4-5-19-5 M50 No

4-5-19-6 M63 No

4-5-19-7 M75 No

4-5-19-8 M90 No

4-5-20

4-5-20-1 M20 No

4-5-20-2 M25 No

4-5-21 Installation and testing of fluorescent lighting fitting outdoor type explosion proof or industrial type

4-5-21-1 2 x 20 W No

4-5-21-2 2 x 40 W No

4-5-22 Installation of floodlight tower

4-5-22-1 Galvanaized steel floodlight tower ,12M height NO.

Installation of explosion proof or industrial type cable gland for PVC insulated, PVC sheathed type cable for following items:


Electrical

Activity Unit

4-5-22-2 Galvanaized steel floodlight tower ,6M height with 1×150 Sodium Vapor NO.

4-5-22-3 NO.

4-5-22-4 NO.

4-5-22-5 NO.

4-5-22-6 NO.

4-5-22-7 Installation and testing of HP sodium floodlight , explosion proof or industrial type 1x250w NO.

4-5-22-8 NO.

4-5-22-9 Installation and testing of photo cells SET

4-5-23 installation and testing of

4-5-23-1 warning light system comprising air craft warning light panel NO

4-5-23-2 air craft warning light NO

4-5-23-3 Photocell NO

4-5-23-4 Meter

4-5-24 Installation and testing of local control station , explosion proof or industrial

4-5-24-1 Start - stop Set

4-5-24-2 Start - stop - ammeter Set

Lighting pole , rigid steel conduit ,hot dip galvanized, 1 1/2" dia,and 2.2m height with all accessories ( 2x36w lighting fixture )

Lighting pole , rigid steel conduit ,hot dip galvanized, 1 1/2" dia,and 2.2m height with all accessories ( 2x18w lighting fixture )

Lighting pole , rigid steel conduit ,hot dip galvanized, 1 1/2" dia,and 1m height with all accessories ( 2x36w lighting fixture ) bracket type

Lighting pole , rigid steel conduit ,hot dip galvanized, 1 1/2" dia,and 1m height with all accessories ( 2x18w lighting fixture ) bracket type

Installation of lighting junction box three or four intersection type explosion proof or industrial type

Installation and testing of earthing cable 1 kV, copper conductor PVC sheathed, with rods and termoweld connection


Electrical

Activity Unit

4-5-24-3 Start - stop local/remote Set

4-5-24-4 Start-stop-ammeter local / remote Set

4-5-25 Installation and testing of paging system

4-5-25-1 loudspeaker(EX or industrial) No

4-5-25-2 control console SET

4-5-25-3 Junction box (EX or industrial) No

4-5-25-4 Access Unit No

4-5-26 Installation and testing of telephone system

4-5-26-1 Junction box for explosion proof or industrial telephone No

4-5-26-2 Main distribution frame Set

4-5-26-3 Explosion proof or industrial telephone set Set

4-5-27 Installation and testing of CCTV system

4-5-27-1 CCTV cabinet Set

4-5-27-2 CCTV camera Set

4-5-27-3 Color monitor with operator console Set

4-5-27-4 Cable marking using stainless steel tape No


Electrical

Activity Unit

4-5-28 Installation and testing of Cathodic protection system comprising of

4-5-28-1 Zinc earthing cell with necessary cable No

4-5-28-2 Test post complete No

4-5-28-3 Spark gap No

4-5-28-4 Thermit weld connection No

4-5-28-5 Transformer/rectifier 400V incoming Set

4-5-28-6 Anode , high silicon cast iron with necessary cable No

4-5-28-7 Coke breeze backfill for preparation of anode bed Kg

4-5-28-8 Sacrificial anode with necessary cable No

4-5-28-9 Tee splicing for connecting anodes to main loop No

4-5-28-10 kg

4-5-29

4-5-29-1 S ≤ 6 mm² No

4-5-29-2 6 mm² < S ≤ 16 mm² No

4-5-29-3 16 mm² < S ≤ 50 mm² No

4-5-29-4 50 mm² < S ≤ 95 mm² No

Supply, fabrication and installation of necessary support for electrical and communication system (such as ladders , junction boxes, lighting fitting , etc) with necessary bolt, nut , washer , u bolt in accordance with project drawings and documents

Supply and installation of cable lugs compression type for solid or stranded conductors of nominal cross sectional area specified below


Electrical

Activity Unit

4-5-29-5 95 mm² < S ≤185 mm² No

4-5-29-6 185 mm² < S No

4-5-29-7 installation & testing of MV capacitor bank Set

4-5-29-8 installation and testing of earth rod completed with earth pits , coupling , clamps Set

4-5-29-9 installation and testing of earthing dispatcher Set

4-5-29-10 cadweld termination 35 to 95, 95 to 95 , 70 to 95 , 70 to 70 , 70 to 36 NO

4-5-29-11 lightning protection , rods ,cable tinned copper , clamps Set

4-5-30 Earthing

4-5-30-1 No

4-5-30-2 No

4-5-30-3 No

4-5-30-4 No

4-5-30-5 No

4-5-30-6 No

4-5-30-7 No

4-5-30-8 No

Graphite mould for Tee joint of 400mm2 to 240mm2 conductors with handle (Each one suitable for 50 no.


Graphite mould for Tee joint of 120mm2 to 240mm2 conductors with handle (Each one suitable for 50 no.240: Main Conductor Cross Section,120: Branch Conductor Cross Section

Graphite mould for Tee joint of 120mm2 to 240mm2 conductors with handle (Each one suitable for 50 no.120: Main Conductor Cross Section,240: Branch Conductor Cross Section






Electrical

Activity Unit

4-5-30-9 No

4-5-30-10 No

4-5-30-11 Brass type Conductor clamp for connection grounding conductor to Earth Rod No

4-5-30-12 Brass type Conductor clamp for connection grounding conductorsize 400mm2 to Earth Rod No

4-5-30-13 Brass type Conductor clamp for connection grounding conductorsize 240mm2to Earth Rod No




4-5-30-17 Reinforced concrete Housing Unit No

4-5-30-18 Earthing cable No

4-5-30-19 400mm2 Earthing Cable, Soft drawn copper, PVC covered, Green/Yellow Meter






Graphite mould for Tee joint of 35mm2 to120mm2 conductors with handle (Each one suitable for 50 no.



Electrical

Activity Unit


4-5-30-26 Bare Copper Flat tape 25mm x 3mm THK Meter

4-5-30-27 No

4-5-30-28 No

4-5-30-29 No

4-5-30-30 C type Connector suitable for 240mm2 to 240mm2 No




4-5-30-34 Crimp type Terminal lug 400mm2 No






4-5-30-40 Thermit welding powder suitable for Tee joint 400mm2 to 240 mm2 No

Cross type connection Clamp for 25mmx3mm bare copper flattape.

Test joint suitable for connecting 70mm2 lightning conductor to bare copper flat tape 25mm*3mm THK

Tape clamp suitable for fixing 25mmx3mm bare copper tapeon building roof or wall


Electrical

Activity Unit









4-5-30-49 PVC Insulation Compound No

4-5-30-50 Polarization Cell No

4-5-30-51 PVC Insulation Compound Meter

4-5-30-52 No

4-5-30-53 Air Rod, 500mm long,16mm Diameter No

4-5-30-54 Air Rod saddle suitable for crossing bare copper flat tape 25mmx3mm No

4-5-31 Heat Tracing

4-5-31-1 Heat tracing panel, JB and all accessories Set

Earth Rod, copper sheet on low carbon steel core , high resistant tocorrosion, high tensile strength, 19 mm diameter, 2x1500mm lengthwith coupling and driving head and spike


Instrument

Activity Unit

4-6 Instrument

4-6-1

4-6-1-1 Set

4-6-1-2 Laser printer No

4-6-1-3 control desks for operator stations No

4-6-1-4 Chairs for operators No

4-6-1-5 Blank desks No

4-6-1-6 Printer tables including power supply distribution to workstations No

4-6-1-7 FCS cabinet Set

4-6-1-8 FCS marshaling cabinet Set

4-6-1-9 FCS Miscellaneous cabinet Set

4-6-2

4-6-2-1 Set

4-6-2-2 ESD cabinet Set

4-6-2-3 ESD marshaling cabinet Set

Installation and test of FCS system in proper location according to the relevantdocuments and drawings with their necessary equipments as follows:

Maintenance workstation including: one 21"color CRT monitor, one operator keyboard +one alphanumeric keyboard, one mouse, one hard driver and relevant accessories

Installation and test of ESD system in proper location with necessary equipment as follows

Engineering station PLC set engineering station includes all property firm ware and system software required for programming, testing, maintenance, commissioning and continuous operation


Instrument

Activity Unit

4-6-3 Installation and test of fire and gas detection and alarm system follows

4-6-3-1 Fire and Gas cabinet Set

4-6-3-2 Fire and gas alarm panel Set

4-6-4 Installation and test of packages system as follows

4-6-4-1 PLC system (including marshaling cabinets) for packaged compressors Set

4-6-4-2 Local panel for packaged compressors Set

4-6-5 Installation and test of analyzer system with their necessary equipments as follows

4-6-5-1 Set

4-6-5-2 Set

4-6-5-3 Set

4-6-5-4 Set

4-6-5-5 H2 analyser Set

4-6-5-6 H2S analyser Set

4-6-5-7 CO analyser Set

Ph-meter, The analyzer unit and the control unit should be installed together with the sample conditioning system in an analyzer cubicle.

Conductivity-meter, The analyzer unit and the control unit should be installed together with the sample conditioning system in an analyzer cubicle.

Oxygen-meter, The analyzer unit and the control unit should be installed together with the sample conditioning system in an analyzer cubicle.

Moisture analyser The Analyzer unit and the control unit should be installed together with the sample conditioning system in an analyzer house


Instrument

Activity Unit

4-6-5-8 CO2 analyzer Set

4-6-5-9 Conditioning system to be installed on the outside wall of analyser house Set

4-6-5-10 Preconditioning system near the take off Set

4-6-5-11 Process gas chromatograph installed inside the analyzer house Set

4-6-5-12 Set

4-6-6

4-6-6-1 1" , 300# NO

4-6-6-2 1" , 600# NO

4-6-6-3 1.5" , 300# NO

4-6-6-4 1.5" , 600# NO

4-6-6-5 2" , 300# NO

4-6-6-6 2" , 600# NO

4-6-6-7 3" , 300# NO

4-6-6-8 3" , 600# NO

4-6-6-9 4" , 300# NO

4-6-6-10 4" , 600# NO

Equipping of analyser House with piping, tubing, electrical equipment, instrument

Installation, calibration and test of control valves and accessories (limit switches and solenoid valves) with their necessary connections as follows


Instrument

Activity Unit

4-6-6-11 6" , 300# NO

4-6-6-12 6" , 600# NO

4-6-6-13 6" , 900# NO

4-6-6-14 8" , 150# NO

4-6-6-15 8" , 300# NO

4-6-6-16 8" , 600# NO

4-6-6-17 10" ,150# NO

4-6-6-18 10" , 300# NO

4-6-6-19 12" , 150# NO

4-6-6-20 12" , 300# NO

4-6-6-21 14" , 300# NO

4-6-6-22 16" ,150# NO

4-6-6-23 24" , 150# NO

4-6-6-24 36" , 300# NO

4-6-7

4-6-7-1 1" Set

Installation, calibration and test of self actuated pressure control valves for blanketing System with their necessary connections as follows


Instrument

Activity Unit

4-6-7-2 Set

4-6-8

4-6-8-1 1/4" , NPT NO

4-6-8-2 3/4" , 300# NO

4-6-8-3 1" , 300# NO

4-6-8-4 1.5" , 300# NO

4-6-8-5 1.5" , 600# NO

4-6-8-6 2" , 300# NO

4-6-8-7 2" , 600# NO

4-6-8-8 3" , 300# NO

4-6-8-9 3" , 600# NO

4-6-8-10 4" , 300# NO

4-6-8-11 4" , 600# NO

4-6-8-12 6" , 300# NO

4-6-8-13 6" , 600# NO

4-6-8-14 8" , 150# NO

Installation, calibration and test of air filter regulator for control valves with their necessary connections

Installation, calibration and test of pneumatic spring return cylinder on/off valves and accessories(limit switches and solenoid valves) with their necessary connections

as follows


Instrument

Activity Unit

4-6-8-15 8" , 300# NO

4-6-8-16 10" , 150# NO

4-6-8-17 10" , 300# NO

4-6-8-18 10" , 600# NO

4-6-8-19 10" , 900# NO

4-6-8-20 12" , 150# NO

4-6-8-21 12" , 300# NO

4-6-8-22 12" , 900# NO

4-6-8-23 14" , 150# NO

4-6-8-24 14" , 300# NO

4-6-8-25 14" , 600# NO

4-6-8-26 16" , 150# NO

4-6-8-27 18" , 150# NO

4-6-8-28 20" , 150# NO

4-6-8-29 20" , 300# NO

4-6-8-30 24" , 150# NO


Instrument

Activity Unit

4-6-8-31 24" , 300# NO

4-6-8-32 26" , 150# NO

4-6-9

4-6-9-1 1" x 1" , 300# x 150# NO

4-6-9-2 1" x 2" , 300# x 150# NO

4-6-9-3 1" x 2" , 600# x 150# NO

4-6-9-4 1.5" x 2" , 300# x 150# NO

4-6-9-5 1.5" x 3" , 300# x 150# NO

4-6-9-6 2" x 3" , 300# x 150# NO

4-6-9-7 2" x 4" , 300# x 150# NO

4-6-9-8 3" x 4" , 300# x 150# NO

4-6-9-9 3" x 4" , 600# x 150# NO

4-6-9-10 4" x 6" , 300# x 150# NO

4-6-9-11 4" x 6" , 600# x 150# NO

4-6-9-12 6" x 8" , 300# x 150# NO

4-6-9-13 6" x 8" , 600# x 150# NO

Installation, calibration and test of safety relief valves (safety / relief breather, pressure relief , vacuum relief, pressure & vacuum relief, thermal relief) as follows


Instrument

Activity Unit

4-6-9-14 6" x 10" , 300# x 150# NO

4-6-9-15 8" x 10" , 300# x 150# NO

4-6-10 Installation, calibration and test of transmitters and local indicators as followes

4-6-10-1 Rotameter NO

4-6-10-2 Magnetic flow meter NO

4-6-10-3 Pitot tube flow meter NO

4-6-10-4 Mass flow meter (coriolis) NO

4-6-10-5 Mass flow meter (thermal) NO

4-6-10-6 METER RUN NO

4-6-10-7 Flow Transmitter NO

4-6-10-8 Restriction orifice NO

4-6-10-9 Glass level gauge NO

4-6-10-10 Magnetic level indicator NO

4-6-10-11 Level transmitter (displacer) NO

4-6-10-12 Level transmitter (radar) NO

4-6-10-13 Level transmitter (DP cell) NO


Instrument

Activity Unit

4-6-10-14 Level transmitter (DP cell with diaphragm seal and capillary) NO

4-6-10-15 Pressure transmitter NO

4-6-10-16 Differential pressure transmitter NO

4-6-10-17 Pressure gauge NO

4-6-10-18 Pressure & Diffrential pressure transmitter with Capillary NO

4-6-10-19 Pressure & Diffrential pressure transmitter without Capillary NO

4-6-10-20 Differential pressure indicator NO

4-6-10-21 Local indicator NO

4-6-10-22 Temp. Transmitter(C/W thermocouple or RTD and thermo well) NO

4-6-10-23 Temperature transmitter remote mounted NO

4-6-10-24 Bi-metal glass thermometer c/w thermo well NO

4-6-10-25 Test well NO

4-6-10-26 Skin type temperature elements (thermocouples) on furnaces NO

4-6-11 Installation, calibration and test of Fire and Gas Device

4-6-11-1 Combustion gas detector (FGD) NO

4-6-11-2 Toxic gas detector (TGD) NO


Instrument

Activity Unit

4-6-11-3 Flame Detector (FD) NO

4-6-11-4 Smoke detector (SD) NO

4-6-11-5 Heat detector (HD) NO

4-6-11-6 Manual call point (MCP) NO

4-6-11-7 Flashing light (UL) NO

4-6-11-8 Horn & bell (UK) NO

4-6-11-9 Thermosensitive Cable

4-6-12 Routing of instrument cables as follows

4-6-12-1 1 x 2 x 1.5 mm2 / Shield , Armour

4-6-12-2 1 x 2 x 1.5 mm2 / Shield , Armour , Lead Sheath

4-6-12-3 1 x 2 x 2.5 mm2 / Armour

4-6-12-4 1 x 3 x 2.5 mm2 / Shield , Armour

4-6-12-5 2 x 2 x .75 mm2 / Individual+Overall Shield , Armour , Lead Sheath


4-6-12-7 6 x 2 x .75 mm2 / Overall Shield , Armour , Lead Sheath


Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter


Instrument

Activity Unit

4-6-12-9 6 x 2 x 2.5 mm2 / Overall Shield , Armour , Lead Sheath

4-6-12-10 6 x 3 x 2.5 mm2 / Individual+Overall Shield , Armour , Lead Sheath



4-6-12-13 12x 3 x 2.5 mm2 / Individual+Overall Shield , Armour , Lead Sheath



4-6-12-16 24 x 3 x 2.5 mm2 / Individual+Overall Shield , Armour , Lead Sheath

4-6-12-17 3 x 2.5 mm2 / Armour , Lead Sheath

4-6-13

4-6-13-1 Bare strand copper earthing green/yellow PVC insulated cable (35mm2)



4-6-13-4 Bare strand copper earthing green PVC insulated cable (35mm2)

4-6-14

4-6-14-1 Straight Cable Ladder with cover, 200mm Width and 150mm Height

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Installation of earthing material (including cables, crimp cable lugs, bolt and nuts, and relevant fitting and accessories ) as followes

Meter

Meter

Meter

Meter

Installation of cable tray with Covers, joints bracket, supports and all accessories as follows

Meter


Instrument

Activity Unit



4-6-14-4 Straight Cable Tray with cover, 50mm Width and 150mm Height




4-6-14-8 HORIZONTAL BEND 45°,Ladder Type, 200mm Width and 150mm Height NO






4-6-14-14 HORIZONTAL BEND 45°,Tray Type, 50mm Width and 150mm Height NO




Meter

Meter

Meter

Meter

Meter

Meter


Instrument

Activity Unit





4-6-14-22 VERTICAL OUTSIDE BEND 90°,Ladder Type, 200mm Width and 150mm Height NO



4-6-14-25 VERTICAL INSIDE BEND 90°,Ladder Type, 200mm Width and 150mm Height NO



4-6-14-28 VERTICAL OUTSIDE BEND 90°,Tray Type, 50mm Width and 150mm Height NO




4-6-14-32 VERTICAL INSIDE BEND 90°,Tray Type, 50mm Width and 150mm Height NO



Instrument

Activity Unit



4-6-14-36 "T" DERIVATION SECTION,Ladder Type, 200mm Width and 150mm Height NO



4-6-14-39 "X" CROSS SECTION ,Ladder Type, 200mm Width and 150mm Height NO



4-6-14-42 "T" DERIVATION SECTION,Tray Type, 50mm Width and 150mm Height NO




4-6-14-46 "X" CROSS SECTION,Tray Type, 50mm Width and 150mm Height NO





Instrument

Activity Unit

4-6-14-50 NORMAL JOINT , Ladder Type NO

4-6-14-51 HORIZONTAL HINGED JOINT , Ladder Type NO

4-6-14-52 VERTICAL HINGED JOINT , Ladder Type NO

4-6-14-53 NORMAL JOINT , Tray Type, 50mm Height NO

4-6-14-54 NORMAL JOINT , Tray Type, 100mm Height NO

4-6-14-55 HORIZONTAL HINGED JOINT , Tray Type, 50mm Height NO

4-6-14-56 HORIZONTAL HINGED JOINT , Tray Type, 100mm Height NO

4-6-14-57 VERTICAL HINGED JOINT , Tray Type, 50mm Height NO

4-6-14-58 VERTICAL HINGED JOINT , Tray Type, 100mm Height NO

4-6-14-59 BLIND END PLATE,Ladder Type, 200mm Width and 150mm Height NO



4-6-14-62 BLIND END PLATE,Tray Type, 50mm Width and 150mm Height NO




Instrument

Activity Unit


4-6-15 Installation of junction boxes with glands as follows

4-6-15-1 JUNCTION BOX FOR 6 PAIRS / TRIPLES SIGNAL Set



4-6-15-4 JUNCTION BOX FOR FIELDBUS SIGNAL (2 DEVICE) Set




4-6-16

4-6-16-1 1/2" NPT ( Armoured Cable) No.

4-6-16-2 1/2" NPT ( Armoured & Lead SH Cable) No.

4-6-16-3 3/4" NPT ( Armoured & Lead SH Cable) No.

4-6-16-4 1" NPT ( Armoured & Lead SH Cable) No.

4-6-16-5 1 1/4" NPT ( Armoured & Lead SH Cable) No.

4-6-16-6 1 1/2" NPT ( Armoured & Lead SH Cable)

Installation of cable glands and reducer “e+d” for electronic instruments and junction boxes as follows


Instrument

Activity Unit

4-6-16-7 2" NPT ( Armoured & Lead SH Cable) No.

4-6-16-8 2 1/2" NPT ( Armoured & Lead SH Cable) No.

4-6-16-9 RE ¾"NPTM x ½"NPTF No.

4-6-16-10 RE 1"NPTM x ¾"NPTF No.

4-6-16-11 RE 1 1/2"NPTM x 1"NPTF No.

4-6-16-12 RE 1 1/2"NPTM x 1 1/4"NPTF No.

4-6-16-13 REB ¾"NPTF x ½"NPTM No.

4-6-16-14 RE 2 1/2"NPTM x 2"NPTF No.

4-6-16-15 RE 3"NPTF x 2 1/2"NPTM No.

4-6-17 Installation of conduit for supporting instrument cables as follows

4-6-17-1 1"conduit SCH. 40

4-6-17-2 2"conduit SCH. 40

4-6-17-3

4-6-18

4-6-18-1 Tubing ½" x 0.035" THK No.

4-6-18-2 Tubing ½" x 0.065" THK No.

Meter

Meter

Termination of all instruments cables according to relevant documents and drawings

LUMP SUM

Installation of all tubes and pipes including all necessary Connection (All fittings and valves) and hydrostatic tests as follows


Instrument

Activity Unit

4-6-18-3 Cap ½"NPT No.

4-6-18-4 Tee ½"NPT No.

4-6-18-5 Tee ¾"NPT No.

4-6-18-6 Tee 1"NPT No.

4-6-18-7 Tee ½"OD No.

4-6-18-8 Male Connector ½"OD x ½"NPTM No.

4-6-18-9 Straight Union ½"OD No.

4-6-18-10 Condensing / Seal pot 3" No.

4-6-18-11 Gauge Siphon ½" NPT No.

4-6-18-12 Globe valve ½"NPT No.

4-6-18-13 Ball valve ½"NPT No.

4-6-18-14 Seamless Steel Pipe 1/2" No.

4-6-18-15 Seamless Steel Pipe 3/4" No.

4-6-18-16 Seamless Steel Pipe 1" No.

4-6-18-17 90° Elbow-Forged 1/2"NPTF No.

4-6-18-18 90° Elbow-Forged 3/4"NPTF No.


Instrument

Activity Unit

4-6-18-19 90° Elbow-Forged 1"NPTF No.

4-6-18-20 Union forged 1/2"NPTF No.

4-6-18-21 Union forged 3/4"NPTF No.

4-6-18-22 Union forged 1"NPTF No.

4-6-18-23 Pipe Nipple 1/2"NPT No.

4-6-18-24 Pipe Nipple 3/4"NPT No.

4-6-18-25 Pipe Nipple 1"NPT No.

4-6-18-26 Swage Nipple 1" NPTM x 1/2"NPTM No.

4-6-18-27 Swage Nipple 1" NPTM x 3/4"NPTM No.

4-6-18-28 Swage Nipple 3/4" NPTM x 1/2"NPTM No.

4-6-18-29 Coupling forged 1/2"NPTF No.

4-6-18-30 Coupling forged 3/4"NPTF No.

4-6-18-31 Coupling forged 1"NPTF No.

4-6-18-32 Cylindrical Head Plug forged 1/2"NPTF No.

4-6-18-33 Cylindrical Head Plug forged 3/4"NPTF No.

4-6-18-34 Cylindrical Head Plug forged 1"NPTF No.


Instrument

Activity Unit

4-6-18-35 PC

4-6-18-36 PC

4-6-18-37 NO

4-6-18-38 Installation of sun shades according to relevant documents and drawings NO

4-6-18-39

4-6-18-40 KG

Installation and test of 2-valve isolation-calibration manifold ½" for pressure instruments

Installation and test of 5-valve manifold ½" for differential pressure instruments

Installation of stand pipes made out of 2" pipes, SCH 40, 2 m height on 250x250x12mm base plate and four stiffener with relevant bolt and nuts (without sun shade) according to relevant documents and drawings

Installation of steel supports of junction boxes, cable trays and other instruments according to relevant documents and drawings

Meter

Painting and repairing of:stanchions, structures, racks, supports for installation of instruments, local panels, JB, cable trays and conduits instrument sunshades, pipes and tubes (except stainless steel and galvanizin)

یونیت در 67حجم یونیت در 17حجم یونیت در 59حجم

باقی مانده

اجرا شده

بینی پیششده اولیه

باقی مانده

اجرا شده


باقی مانده

اجرا شده


شده اجرا


حجمدر

یونیت55

شده بینی پیشیونیت اولیه در 05حجم

باقی مانده

اجرا شده


باقی مانده

اجرا شده


باقی مانده

اجرا شده


باقی مانده

باقی مانده

شده اجرا


حجمدر

یونیت55


باقی مانده

اجرا شده


باقی مانده

اجرا شده


باقی مانده

اجرا شده


باقی مانده

باقی مانده

-

شده اجرا


حجمدر

یونیت55


باقی مانده

اجرا شده


باقی مانده

اجرا شده


باقی مانده

اجرا شده


باقی مانده

باقی مانده

واحد شرح رديف

1-2-1

5.19 مترمكعب 1-2-1-1

16.83 مترمكعب 1-2-1-2

1.98 مترمكعب 1-2-1-3

2.41 مترمكعب 1-2-1-4

6.97 مترمكعب 1-2-1-5

18.48 مترمكعب 1-2-1-6

14.61 مترمربع 1-2-1-7

2.08 مترمربع 1-2-1-8

Euro TOTAL

1-2-2

49.14 مترمكعب 1-2-2-1

67.83 مترمكعب 1-2-2-2

1.39 مترمكعب 1-2-2-3

2.33 مترمكعب 1-2-2-4

2.64 مترمكعب 1-2-2-5

2.04 مترمكعب 1-2-2-6

3.10 مترمكعب 1-2-2-7

BANDAR ABBAS GAS CONDENSATE REFINERYINSTALLATION COST OF CIVIL

UNIT (01-02-18-16-04)

یونیت در بهاي حجمواحد

) يورو)شده اجرا

براوردمتره اولیه

خاكريزي و خاكبرداري : عملياتو كانالها ، فونداسيونها براي سخت زمينهاي در خاكبرداري

تا حمل ، بارگيري ، خاكبرداري شامل و 10ترنچها كيلومترپروژه . فني مشخصات با مطابق تخليه

حداكثر عمق تا سنگي زمينهاي در براي 3خاكبرداري متر ، خاكبرداري شامل ترنچها و كانالها ، فونداسيونها

تا حمل ، مشخصات 10بارگيري با مطابق تخليه و كيلومتروسيله . هر با و پروژه فني

شماره رديف به بهاء و 2اضافه خاكبرداري عمق هرگاهاز بيشتر عمق 3حفاري در واقع احجام ازاء به باشد 3متر

، 4تا بار يك براي 5تا 4متر ترتيب همين به و دوبار متر. بيشتر هاي عمق

سطح به رسيدن صورت در فوق هاي رديف به بهاء اضافهاز بيش زيرزميني عمق .3آبهاي متر

، ( Backfillخاكريزي ) خاكي مناسب مصالح تهيه شاملتا حمل ، رگالژ 10بارگيري ، تسطيح ، تخليه ، كيلومتر

پروژه . مشخصات با مطابقضخامت ) به زيراساس مصالح و ( 15خاكريزي متر سانتي

ضخامت ) به مصالح ( 15اساس تهيه شامل متر سانتيتا حمل ، بارگيري ، خاكي ، 10مناسب تخليه ، كيلومتر

پروژه . مشخصات با مطابق تراكم و رگالژ ، تسطيح

سنگي مصالح اجراي و تهيه Stone Pitchingتهيه شاملضخامت به سنگي مصالح اجراي و مناسب سنگي 30مصالح

فني . مشخصات مطابق شيبها از حفاظت جهت متر سانتي

مصالح تهيه شامل ، ريزي شن سنگي مصالح اجراي و تهيهضخامت به آن اجراي و محدوده 10مناسب در متر سانتي

فني . مشخصات مطابق شده مشخص هاي

ريزي بتن : عملياتمصالح تهيه شامل ريزي بتن عمليات اجراي و تهيه

، ريزي بتن ، پروژه فني مشخصات با مطابق ، مناسببتن ) لزوم صورت در شيت اتيلن پلي نصب ، كيورينگ

نظافت ( . بتن عنوان به تهيه كامل شامل فونداسيون ريزي بتن عمليات اجراي و تهيهبتن ، پروژه فني مشخصات با مطابق ، مناسب مصالحصورت در شيت اتيلن پلي نصب ، كوتينگ ، كيورينگ ، ريزي

فشاري ) ( مقاومت با كامل بتن كيلوگرم 280تا 210لزوماي ) ( . استوانه مربع متر سانتي ، بر پدستال در باال به پي سطح روی از ريزي بتن بهاي اضافه

ارتفاع تا واقع حجمهای برای تیرها و ستونها و 5دیوارهامتر .

در فونداسيون روي از باال به پي از ريزي بتن بهاي اضافهاز بيـش ارتفاع در واقع حجمهاي براي ها، ستون و ديوارها

تا 5 .10متر ها متر ستون و ديوارها باالدر به پي از ريزي بتن بهاي اضافهاز بيـش ارتفاع در واقع حجمهاي براي ، ها تا 10وتير 15متر

و متر. ديوارها در باال به پي روي از ريزي بتن بهاي اضافهاز بيـش ارتفاع در واقع حجمهاي براي ، تيرها و ها ستون

تا 15 .25متر و متر ها ستون و ديوارها باالدر به پي از ريزي بتن بهاي اضافهاز بيـش ارتفاع در واقع حجمهاي براي ، تا 25تيرها 40متر

متر.

AF20

ارتفاع 5 متر به 2 متر تبدیل شد



UNIT (01-02-18-16-04)




371.49 مترمكعب آتش ضد عايق اجراي و تهيه 1-2-2-8

1.34 كيلوگرم 1-2-2-9

1.35 كيلوگرم 1-2-2-10

1.36 كيلوگرم 1-2-2-11

1.38 كيلوگرم 1-2-2-12

0.77 1-2-2-13

1.87 1-2-2-14

3.24 كيلوگرم 1-2-2-15

1.87 كيلوگرم 1-2-2-16

Euro TOTAL

1-2-3

8.81 مترمربع 1-2-3-1

2.42 مترمربع 1-2-3-2

2.63 مترمربع 1-2-3-3

1.56 مترمربع 1-2-3-4

1.20 مترمربع 1-2-3-5

6.34 طول متر استاپ واتر اجراي و تهيه 1-2-3-6

20.15 مترمربع 1-2-3-7

- Euro TOTAL

نوع از فونداسيون آرماتور اجراي و تهيه AIIIتهيه شاملآرماتوربندي و خم ، برش ، مختلف سايزهاي از ميلگرد

فني . مشخصات در مطابق تيرها و ها ستون و ديوارها آرماتور اجراي و تهيهحداكثر تا سايزهاي 10ارتفاع از ميلگرد تهيه شامل متر

فني . مشخصات مطابق آرماتوربندي و خم ، برش ، مختلفدر تيرها و ها ستون و ديوارها آرماتور اجراي و تهيه

از حداكثر 10ارتفاع از 20تا ميلگرد تهيه شامل مترمطابق آرماتوربندي و خم ، برش ، مختلف سايزهاي

فني . مشخصاتدر تيرها و ها ستون و ديوارها آرماتور اجراي و تهيه

از حداكثر 20ارتفاع از 40تا ميلگرد تهيه شامل مترمطابق آرماتوربندي و خم ، برش ، مختلف سايزهاي

فني . مشخصاتدسي

مترمكعبو اجراء ، مصالح تهيه شامل ، يك تيپ گروت اجراي و تهيهسيمان ) ( . و ماسه فني مشخصات مطابق آن نگهداري

دسيمترمكعب

و اجراء ، مصالح تهيه شامل ، دو تيپ گروت اجراي و تهيهفني . مشخصات مطابق آن نگهداري

نصب و و HOT DIP GALVANIZED ANCHOR BOLTتهيه سايز هر از مصالح تهيه شامل ،

فني . مشخصات مطابق نصب

بتن به متصل فلزي صفحات اجراي و تهيه (Insert & Embeded Plate)

بندي قالب : عملياتو بستن ، قالب مصالح تهيه شامل ، فونداسيون بندي قالب

فني . مشخصات مطابق قالب كردن بازو ديوارها براي بندي قالـب و وسايل تهيه بهاء اضافه

حداكثر آنها ارتفاع كه بتني تيرهاي و از 3ستونهاي متر. باشد فونداسيون و روي ديوارها براي بندي قالـب و وسايل تهيه بهاء اضافه

از بيـش آنها ارتفاع كه بتني تيرهاي و و 3ستونهاي متر.10حداكثر باشد فونداسيون روي از متر

و ديوارها براي بندي قالـب و وسايل تهيه بهاء اضافهاز بيـش آنها ارتفاع كه بتني تيرهاي و و 10ستونهاي متر

.20حداكثر باشد فونداسيون روي از مترو ديوارها براي بندي قالـب و وسايل تهيه بهاء اضافه

از بيـش آنها ارتفاع كه بتني تيرهاي و و 20ستونهاي متر.40حداكثر باشد فونداسيون روي از متر

مصالح تهيه شامل آسفالت عمليات اجراي و حمل ، تهيهضخامت به ضخامت 6بيندر به توپوكا و متر سانتي 4سانتي

فني . مشخصات مطابق اجراء و متر



UNIT (01-02-18-16-04)




1-2-4

10.77 مترمكعب 1-2-4-1

1.74 كيلوگرم درپوش جهت چدني گريتيگ اجراي و حمل ، تهيه 1-2-4-2

22.00 طول متر خیابان کنار بتنی جداول نصب و تهيه 1-2-4-3

Euro TOTAL

1-2-5*

105.00 مترمکعب ساخته پيش ستون نصب 1-2-5-1*

105.00 مترمکعب ساخته پيش تير نصب 1-2-5-2*

Euro TOTAL

1-2-6*

0.00 مربع متر 1-2-6*

Euro TOTAL

1-2-7*

528.00 مترمكعب 1-2-7*

Euro TOTAL

1-2-8*

470.00 مترمكعب 1-2-8*

470.00 مترمكعب 1-2-8*

Euro TOTAL

1-2-9*

0.00 عدد 1-2-9*

Euro TOTAL

سطحي آبهاي آوري جمع و زهكشي : شبكهو زير سازي بستر جهت ريزي ماسه اجراي و حمل ، تهيه

غيره و دقيق ابزار تاسيساتي،برق، هاي لوله روي

ساخته پيش تير و ستون : نصب

بتن روی بر محافظ پوشش : (COATING) اجرای

محافظ ) پوشش .Coatingاجرای بتن( روی بر

ستون ریزی گروت عملیات :( GP ) اجرای

ستون پای ریزی GPگروت

تیر ریزی گروت عملیات :( HF ) اجرای

تیر ریزی HFگروت

تیر ریزی UNIT 51&71برای HFگروت

اجرای و رزوه LENTON تهیه :و

اجرای و PIPE RACK 72برای LENTONتهیه



UNIT (01-02-18-16-04)




MECHANICAL EQUIPMENTS: 1-3

1.21 KG Installation Cost Of Furnace 1-3-1

0.55 KG Installation Cost Of Package Equipments 1-3-2

0.67 KG 1-3-3

0.55 KG Installation Cost Of Drum & Dryer & Ejector 1-3-4

0.56 KG Installation Cost Of Mixer & Blower 1-3-5

0.67 KG Installation Cost Of Pump 1-3-6

0.85 KG Installation Cost Of Compressor 1-3-7

0.76 KG Installation Cost Of Static Equipments 1-3-8

0.51 KG 1-3-9

Euro TOTAL

PIPING: 1-4

47.32 (Inch-Dia) 1-4-1

48.87 (Inch-Dia) 1-4-2

40.35 (Inch-Dia) 1-4-3

27.84 (Inch-Dia) 1-4-4

27.45 (Inch-Dia) 1-4-5

63.81 (Inch-Dia) Installation and Erection Of Valve & Fittings 1-4-6

Euro TOTAL

STEEL STRUCTURE : 1-8-1

0.28 KG 1-8-1-1

0.37 KG 1-8-1-2

4.41 KG 1-8-1-3

Installation Cost Of Heavy Weight Package Equipments W>40 ton

Installation Cost Of Static Equipments Heavy Weight W>40 ton

Installation and Erection and Painting Of AUST Piping For(Welded Joints,Thresded Joints and Flang Joints)

(Without Painting Material)

Installation and Erection and Painting Of ALLOYS Piping For(Welded Joints,Thresded Joints and Flang Joints)


Installation and Erection and Painting Of CRST Piping For(Welded Joints,Thresded Joints and Flang Joints)


Installation and Erection Of GALV Piping For(Welded Joints,Thresded Joints and Flang Joints)

Installation and Erection Of PLST Piping According to drawing and specification For(Welded Joints,Thresded

Joints and Flang Joints)

Installation Steel Structure according to drawing and specifications and Shelters (Without Material and H.D.G

ST37)Installation Ladders and Handrails , …. according to

drawing and specifications (Without Material and H.D.G ST37)

Supply and Erection Of steel Normal Support For Pipe Racks and Pipe according to drawing and

specifications(Without H.D.G and With material 3 Layer Painting Max .Thickness 225µm-ST37)



UNIT (01-02-18-16-04)




Euro TOTAL



UNIT (01-02-18-16-04)




GRATING : 1-8-2

2.84 M ² 1-8-2-1

Euro TOTAL

INSULATION : 1-7

11.14 M2 Installation And Erection Of Hot Insulation for Pipes 1-7-1

18.57 M2 Installation And Erection Of Cold Insulation for Pipes 1-7-2

11.14 M2 1-7-3

6.80 M2 Installation And Erection Of Jacketing for Pipes 1-7-4

13.00 M2 Installation And Erection Of Insulation Equipment 1-7-5

Euro TOTAL

Supply Of Material and Erection Of Grating according to drawing and specifications

Installation And Erection Of Hot & Cold Insulation for Fitting & Valves

نحوه براورد و احجام ومقادیر پیش بینی باقی مانده 8 تا...

Documents